Job Responsibilities:

· Ensure that adequate equipment and facilities are provided for verification of product quality.

· Ensure that all controlled documents are administered effectively.

· Quality control of sub-contractors.

· Daily coordination of all site work activities on Piping, Equipment installation.

· Liaising with Client inspector/Authorized inspector to ensure project requirement is fully achieved through out the project.

· Coordinate with sub-contractor/vendor to resolve quality issues and follow up for corrective actions.

· Carry out verification of purchased products in vendor's premises as specified in contracts.

· Supervise and manage the steel welding procedure and ensure the welding quality.

· Assist on the coordination with temp QP launching sequence for whole viaduct segment.

· Ensure identification and traceability of incoming, in-process finished products.

· Stipulate and control adequate criteria for workmanship.

· Monitoring of all Inspection Records, Material Test Reports and Mill Certificates.

· Ensure that all inspection, test and identifications are carried out according to quality plan or documented procedures.

· Quality check for architectural finishing such as plastering, brick wall and etc.

· Ensure that all nonconforming materials and products are adequately controlled.

· Investigate the cause of the nonconforming products and the corrective action needed to prevent recurrence.

· Ensure that all quality reports and customers' complaints are analyzed with adequate corrective actions taken.

· Ensure that quality records are properly stored and maintained.

· Define quality requirement for service and installation of products.

· Maintain adequate statistical techniques to control product and process quality.

· Check the BCA approved drawing and study for the feasible work for site.

Job Requirements :

· Bachelor's degree in Engeering studied, or a related field

· Mininum 5 years QA/QC experiences

· LTA Mrt experiences will be an advantages

· Able to read, understand and interpret technical requirements, quality procedures, drawings, P&ID.

· Detail-oriented and have strong communication skills and able to work with people from all levels.

· Comfortable working within a fast-changing environment, ability to multi-task and cope with ambiguity.

· Independent and a self-starter, with strong personal drive to initiate and implement.

· Good knowledge of documentation procedures.

· Hands on experience with pressure vessel, PED & MOM requirements, ENstandards

• Assist the project managers/Planning & Engineering Department in all aspects of project management related works.

• Understudy and understand the construction activities and progress, planning, implementation and monitoring work schedules in accordance to the master and detailed work programme.

• Liaise with material suppliers for technical issues and coordinate the site activities with main contractors.

• Handling of technical and engineering problems.

• Prepare reports and method statements following requirements by main contractors and project owners.

• Manage and control workers and monitor their work closely to keep site safe.

• Supervise ongoing site activities closely.

Requirement

• Degree/Diploma in Civil Engineering or construction related major

• Able to work at site

• Good written and spoken communication skills

• Competent with Microsoft applications (Word, Excel, Power Point etc.)

• Proficient in AUTOCAD

• Able to work under pressure and meet tight deadlines with minimum supervision

• Strong initiative and resourcefulness

Handle and determine the quantities, shapes and sizes and location of the rods from the drawings and sketches
Prepare the cutting list schedule depending on the design specs
Perform advance planning in rebar schedule per area
Perform quantity of steel material needed for the design execution
Can read structural drawing in preparing rebar's quantity
Compile and prepare material wastage summary
Control and minimize material wastages
Generation of monthly report
Other adhoc duties as assigned by the immediate supervisor/management

Must have knowledge in AutoCAD, MS Ofiice
Candidate must complete at least Higher secondary/Pr-U/A level/College
At least 1-2 years’ bar bend scheduler experience
Willing to travel aroung project sites offices within Singapore
Able to work independently and cope in a fast-paced environment

Tasks & Responsibilities:

• Prepare electrical calculations, cost estimates, and technical curves for tender submissions.
• Analyze design requirements and ensure compliance with relevant standards.
• Collaborate with clients to gather requirements and provide technical support and specifications throughout the tender lifecycle.
• Work with suppliers and contractors to obtain quotes for special accessories and equipment.
• Prepares electrical design and winding Bill of Materials (BOM) for transformers manufacturing, including schematics and layout drawings.
• Conduct feasibility studies and simulations to optimize design performance.
• Support ad-hoc work such as site surveys, technical meetings and approval drawing preparation etc.

Qualifications & Experience:

• Minimum Bachelor’s degree in Electrical and Electronic Engineering or an equivalent qualification, preferably with a major in electrical power engineering.
• Proficiency in programming languages such as C, C++, etc., is a plus.
• Knowledge of computer-aided design (CAD) software, including AutoCAD 2D/3D.

Interested candidates please send in your resume to:

Topaz Liang Huimin (CEI No. R1104500), email to: [email protected]

EA License No: 99C4599

Handle and determine the quantities, shapes and sizes and location of the rods from the drawings and sketches

Prepare the cutting list schedule depending on the design specs

Perform advance planning in rebar schedule per area

Perform quantity of steel material needed for the design execution

Can read structural drawing in preparing rebar's quantity

Compile and prepare material wastage summary

Control and minimize material wastages

Generation of monthly report

Other adhoc duties as assigned by the immediate supervisor/management

Must have knowledge in AutoCAD, MS Ofiice

Candidate must complete at least Higher secondary/Pr-U/A level/College

At least 1-2 years’ bar bend scheduler experience

Willing to travel aroung project sites offices within Singapore

Able to work independently and cope in a fast-paced environment Chinese/English Language (both writing & reading) is needed to liaise with associates in related to job matters

Responsibilities:

• Perform on-site installation, troubleshooting and debugging of autonomous vehicle (AV) systems and related components.
• Conduct and facilitate regular inspections, diagnostic tests, and scheduled maintenance for all vehicle assets.
• Assist in routine data collection and documentation optimization or preventive maintenance.
• Coordinate operational activities including scheduling, resource allocation, and route optimization for the AV fleet
• Collaborate with cross-functional teams to facilitate coordination between technical tasks and operational requirements.
• Any other additional duties relating to product and operations support.

Requirements:

• An Engineering diploma or degree in Electrical, Electronic, Mechatronics, Robotics, or Automation.
• Hands-on experience in systems deployment, service engineering, technical support, and/or operations coordination.
• Capability to adjust to a shift-based support working environment.
• Experience working in Linux OS environment.
• Practical expertise in electrical and electronic wiring as well as mechanical systems.
• Familiarity with ROS is a plus.
• A Class 3/4 driving license will be an added advantage.

About the client:

Client is a growing CRDM biologics drug development and Pioneered the commercial biomanufacturing of biologics-based medicines

Responsibilities

• Take charge of designing, installing, and commissioning electrical and instrumentation systems for process and utility projects. Ensure project goals—budget, timelines, and functionality—are met while maintaining compliance with cGMP, safety, and environmental standards. Facilitate smooth system integration and operational readiness.
• Develop specifications and engineering documents for electrical and instrumentation systems.
• Perform feasibility studies, risk assessments, and vendor evaluations.
• Collaborate across disciplines to ensure cohesive designs and support procurement activities.
• Supervise installation, testing, and qualification of systems.
• Manage contractors, ensure compliance with standards, and resolve technical issues.
• Lead commissioning activities and validate systems per protocols.
• Set up calibration facilities and manage instrument maintenance schedules.
• Train teams on system usage and compliance protocols.
• Drive system performance monitoring and implement improvements.

Requirements

• Bachelor’s degree or higher in Engineering, Mechatronics, or related fields.
• 8+ years of experience in pharmaceuticals, biotech, or related industries.
• Strong background in design, project management, and instrumentation.
• Familiarity with maintenance systems like Maximo.
• Proficient in AutoCAD and regulatory compliance.
• Open to short-term travel and up to 3 months of training in China.
• Meet project milestones with minimal disruptions.
• Ensure smooth handovers and compliance with HSE and regulatory standards.

Please follow the link to apply, alternately send in your application directly to Aradhana Simon, [email protected];

EA Registration No: R1325013

Key Responsibilities:

• Lead the commissioning and testing of electrical installations and equipment to ensure they meet required standards and specifications
• Prepare and review commissioning plans, procedures, and reports
• Collaborate with project managers, contractors, and other stakeholders to coordinate and execute commissioning activities
• Identify and resolve any electrical issues or discrepancies during the commissioning process
• Provide technical support and guidance to site teams during the installation and testing of electrical systems
• Ensure all commissioning activities comply with relevant regulations, codes, and safety standards
• Maintain accurate records and documentation of commissioning activities
• Participate in the development and implementation of continuous improvement initiatives

Job Requirements:

• Bachelor's degree in Electrical Engineering or a related field
• Minimum 2 years of experience as an Electrical Commissioning Engineer in the engineering industry
• Experience in height tension is a plus
• Proven track record of successfully commissioning electrical systems and equipment
• Excellent understanding of electrical engineering principles, codes, and regulations
• Strong problem-solving, analytical, and troubleshooting skills
• Effective communication and collaboration skills to work with cross-functional teams
• Proficient in the use of commissioning software and tools
• Ability to work independently and manage multiple projects simultaneously

Interested candidates who wish to apply for the advertised position, please click on the APPLY button below to send in your resume to [email protected].

EA License No: 13C6305
Reg. No.: R1981808

For candidate who applied for the advertised position is deemed to have consented to us that we may collect, use or disclose your personal information for purpose in connection with the services provided by us.

Job Overview:

We are seeking a Solutions Engineer to serve as a technical liaison between our customers, sales team, and product development group.. The ideal candidate will combine basic maritime knowledge with technical expertise to deliver comprehensive simulation solutions.

Key Responsibilities:

Technical Implementation

• Lead technical implementation of marine simulator projects, including bridge simulators, engine room, and GMDSS simulators
• Manage project documentation, including specifications, single line drawings, and technical proposal
• Design and assist to set up system network, visual systems, and control interfaces

Technical Support

• Provide technical support during pre-sales activities, concept development and specification preparation
• Work with sales team and distribution channels to design technical solution based on requirements
• Analyze tender’s requirements and architect simulation solutions that meet customer’s requirements
• Manage project documentation, including specifications, single line drawings, and technical proposal

Project Management

• Lead simulator installation projects from initial planning to final commissioning
• Coordinate with hardware suppliers, software teams, and installation contractors
• Manage project timelines and deliverables
• Document technical specifications and installation procedures

Testing Facility Management

• Oversee the operation and maintenance of in-house simulators testing facility
• Test updated configurations as per product releases
• Create and execute test scenarios for new software releases and hardware configurations
• Document test results and prepare bugs reports
• Coordinate facility usage schedule between testing and customer demonstrations

Asset and License Management

• Maintain comprehensive inventory of simulator hardware components and spare parts
• Track and manage software licenses for all simulator installations (both internal and customer sites)
• Oversee license renewal processes and maintain licensing documentation
• Implement version control procedures for software components and custom modifications
• Monitor and report stock hardware inventory and replacement needs

Technical Documentation

• Maintain library of technical documentation
• Create detailed technical documentation, including system architecture diagrams
• Manage documentation for internal testing procedures and quality assurance
• Maintain up-to-date hardware and software inventory documentation

The C&S Engineer is responsible for liaising with consultants to develop the structural works and support tender team to prepare technical submission.

Responsibilities:

• To work with the C&S consultants to develop a structural scheme for structures and buildings
• To carry out engineering analysis to assess the structures' stability and load to be sustained
• To prepare temporary works design for construction activities
• To prepare a technical submission and project quality plan for tender projects
• To carry out engineering design according to Eurocodes or relevant international design codes
• To prepare a submission to authorities for approval of design
• Provide technical advice to team members/colleagues in supporting or leading roles and embrace a culture that values teamwork
• To attend project meetings with Clients and Consultants from other disciplines
• To attend site progress meetings and reply to technical queries

Requirements:

• Bachelors Degree in Civil/Structural Engineering
• A minimum of 2-5 years of working experience in a local engineering consulting company or in CW01 A1 general contractor company as C&S Engineer
• Experience of tender (technical part including ERSS Plan, Site Utilization Plan, Construction methodology etc) - Familiarity with codes of practice, relevant regulations and a working knowledge of authority submission and approval procedures
• Competent user of relevant engineering software(Microsoft Project, Power Point etc)
• Able to interact and work with colleagues and members of other consultants at various level

Responsibilities:

• Architect and implement scalable control and navigation solutions for AMRs utilizing your expertise in ROS, C++, and Python. Your focus will be on robustness, efficiency, and adaptability in real-world environments.
• Evaluate and integrate third-party systems (HW/SW) to enhance KABAM robots' capabilities.
• Conduct rigorous field tests to validate the reliability and performance of navigation systems in diverse outdoor conditions. Leverage insights gained to iteratively improve and optimize navigation algorithms, incorporating SLAM, motion planning, and perception techniques.
• Maintain comprehensive documentation of design, development, and deployment processes. Foster a culture of knowledge sharing within the team by presenting insights and lessons learned in regular sessions.
• Provide expert support for remote robot deployments at customer sites worldwide. Your troubleshooting skills and hands-on assistance will ensure seamless integration and operation of our solutions.
• Stay abreast of the latest advancements in robotics technology. Engage in continuous R&D efforts to explore new methodologies and technologies that can elevate the capabilities and performance of our AMRs. Implement findings to enhance existing systems and processes, keeping KABAM at the forefront of technological innovation.

Requirements:

• Education – Bachelors or Masters in Computer Science/Electrical Engineering/Mechanical Engineering with a focus in robotics, mechatronics, or related fields
• Experience – Bachelors (with at least 3 years relevant experience) or Masters (with at least 1 years relevant work experience)
• Industry – Previous experience in a robotics company preferred
• Supervisory – Personnel management is nice to have. Project management/technical lead experience is preferred
• Language – English (required), Mandarin (desirable)
• Technology – C++/Python, Linux, git, ROS; SLAM, motion planning, or perception techniques
• Coordinating the Work and Activities of Others — Yes
• Guiding, Directing, and Motivating — Yes
• Making Decisions and Solving Problems — Yes

NES Fircroft is currently working with our client to recruit a Senior Automation Engineer to join there operations and projects here in Singapore in a staff position. Our client is a leading pharmacuetical company with operations all over the world, and a world class facility here in Singapore.

Major Responsibilities & Deliverables

• Manage the automation commissioning and design for a greenfield project.

• Design and implement process automation systems and solutions, to control and optimize pharmaceutical manufacturing operations.

• Ensure compliance with Standard Operating Procedures (SOPs), Health, Safety and Environment (HSE) regulations and Current Good Manufacturing Practices (CGMPs).

• Coordinating Automation Vendors to drive Department Objectives.

• Support the development in devising automation solutions that improve productivity, business operations and safety/quality standards.

• Assist the automation manager in terms of Design deliverables and proactively support the automation documentation activities.

• Take up responsibility to be on field and perform any troubleshooting for automation systems.

• Prepare and perform IQ/OQ, Test plans, SDLC documentation ensuring document meets the standards.

• Develop Automation protocols and assist the C&Q team.

• Ensure and manage the documents from the Vendors are delivered on time ensuring the quality.

• Read and understand the company Procedures and implement right procedures at right time.

• Review the technical documentation from vendors and approve as necessary.

• Urge to learn new technology and present the latest technologies available for automation and implement them as necessary.

• Manage the Production equipment from basis design to implementation stage.

• Expected to lead the software design, hardware design of the assigned production equipment.

• Work closely with Automation manager to ensure relevant timelines are met, quality of testing activities and ensure proper documentation is followed.

• Review the hardware panel and instrument selection by the team and ensure it matches the vision of the project.

• Implement the industry standard architecture and panel design by optimizing the cost with the highest quality deliverables.

• Manage the timelines with Vendors and ensure the project costing is kept under control.

• Review the System architecture, hardware/software design specifications, sub-systems interfacing points, detailed point schedules, control panel drawing etc.

• Review and validate technical choices compliance with the design (based on Technical Design Process).

• Ensure documentation relating to the project is properly and promptly dealt with in the correct contractual manner.

• Work with Vendors to support the Digitalization and IIOT to ensure the data storage and integrity is managed properly as per Standards.

• Work with suppliers to implement the latest off the shelf technology to ensure the product life cycle is managed as per industry standards.

• Manage the FAT of the instrument panels, controller panels on the vendor locations and ensure the system is qualified and maintained throughout the life cycle.

Required Experience & Qualification

• Principles of automation, automatic control systems and automatic manufacturing technologies.

• Must have worked on Bio process equipment such as Bioreactor, Chrome, VI, Filtration skids etc.

• Must have worked on DeltaV implementation (preferably greenfield).

• Should possess min of 10 yrs of proven bio process experience and implementation in DeltaV.

• Communication protocols such as Profinet/Ethernet IP are must. Bus communication such as Profibus PA is added advantage.

• Proven SAT experience commissioning the production equipments.

• He/She is required to carry out electrical/electronics tests and inspections.

• Manually examine and diagnose Industrial Equipments & PCB Boards.

• Site troubleshooting may be occasionally required.

• Test functionality and assess electronics hardware problem.

• Troubleshoot problems to component level.

• Able to read schematics diagram is a must

• Use handheld tools such as screwdrivers, voltmeters, Oscilloscopes & electronics testers.

• Work with colleagues (e.g., other computer repair and maintenance technicians) to resolve hardware related problems (troubleshooting).

• Read and review technical support manuals or other materials.

• Your employer may ask you to carry out additional duties than those listed here.

- 5 days Work

Salary range: SGD $2860 to SGD $3680. Depending on qualifications.

Interested candidates with the above qualification and experience, kindly forward your resume to: [email protected]

Job Description

• Carry out troubleshooting and corrective action of instrument breakdown or failures to find out the root cause and best solution in order to restore the functionality get back to normal
• Respond to technical queries from operation personnel and provide advice/solution according to best engineering practice to address issues which affect the operation of the power plant
• Follow C&I work instructions and propose changes for improvement where necessary
• Lead the execution of shutdown works for instrumentation to ensure completion of shutdown work on time
• Work closely with various sections to coordinate cross-functional maintenance works
• Perform risk assessment prior to start of work and conduct on-job risk assessment to identify residual risks associated with the planned/unplanned work
• Monitor spare parts and inventory for critical instrumentation to ensure availability when required in order to minimize unplanned outages. Establish new inventory/cataloging where necessary. Update information in the inventory to ensure that it is relevant for the current operation.
• Provide technical inputs in full cycle of procurement processes for materials and service requisition where required so that all technical requirements are addressed properly to protect company’s interest
• Identify, study, propose, and implement area for improvement in the field of instrumentation engineering to enhance operation and improve overall equipment reliability
• Supervise on-site contractors/additional supplier’s C&I technician(s) as well as C&I vendors to perform site works, review their work procedures and instructions to ensure compliance to achieve highest quality of work in a safe manner
• Participate actively in any meeting, discussion and initiative by team which is relevant to the job role and business needs in order to safeguard company’s interest
• Populate inputs into the Computerized Materials and Maintenance Management System (CMMS) to ensure data and history of equipment maintenance activities are captured accurately. Provide inputs to Planning Engineer with regard to instrument maintenance activities for consolidation

Job Requirements

• Possess a degree in Instrumentation and Control Engineering or Electronics and Electrical Engineering with at least three (3) years of working experience in the instrumentation field, or a diploma in the same fields with at least seven (7) years of working experience in instrumentation field
• Proficient in the codes and standards in the power plant industry i.e. BSI, ISO27001, ANSI, IEC, IEEE, etc.
• Strong interpersonal skills, a team player and able to work with all levels of management and multinational staff
• Hands-on experience in field instrumentation and sensors of different makes
• Proficient in power plant DCS and HMI systems, specifically experience with ABB Advant DCS, GE Alspa DCS will be an advantage
• Proficient in any power plant PLC control system
• Proficient in the P&ID, loop diagram, process functional flow diagram and familiar with gas turbine / steam turbine operations and protection concepts
• Cyber security knowledge in Operation Technology will be an added advantage

OVERVIEW

We’re inventing the future, right here, right now, at Thales. We design the critical security solutions of tomorrow by combining the curiosity to explore, the intelligence to question and the vision to create. Together we solve complicated problems by combining our experience in the market with our leading research and development capabilities.

Be part of revolutionising our skies for the future of aerospace. A future where all modes of aircrafts piloted or unpiloted, civilian or military move around our skies safer, more efficiently and sustainably for a greener and more harmonised airspace.

OUR CULTURE: YOUR GROWTH AND DEVELOPMENT

§ Joining Thales means joining a worldwide and well establish company (85 000 headcounts and growing) and navigate your career in the vast different path available

§ Joining our program is joining an environment where you can discover engineering best practices to deliver safety critical systems

§ Joining the software community and our pillars around Agile and DevSecOps, means being on the critical path of our business challenges, and therefore upskilling our talent is a priority

The story of your journey in this role

You will be a member of the software squad which maintains LORADS3, the current ATM system used operationally by the Civil Aviation Authority of Singapore. As such, you will be supporting the program by analysing PCRs, ECRs, fixing PCRs, design & implementation of the ECRs. Additionally, you will need to participate in issue investigation as part of the quality engineering process. You are also seen as leader in engineering best practices and should work actively within the System Engineering and SW disciplines to propagate them.

Immediate opportunities to upskill and learn the domain & life cycle of an ATM in operation will be provided via a learning mission in our AMS Headquarters in Singapore for a duration of 6-8 weeks. Here you will be guided in a structured regimen of theoretical and practical learning, with the goal of returning to Singapore as an immediate contributor.

KEY ACTIVITIES AND RESPONSIBILITIES

As a Senior Software Engineer, you are accountable for:

· Designing and delivering software to meet requirements including architecture, design, reuse, development, integration and verification.

· Defining and tailoring the software engineering environment and the process, practices and tools applicable to the project.

· Ensuring that the designed solution is developed according to design, schedule, cost and quality expectations.

· Identifying risks and proposing effective solutions; executing mitigation actions and reporting on outcomes and residual risks.

· Designing engineering practices (e.g., “Coding Katas”, “Design Katas”) to improve the software engineering competencies for the team.

KEY KNOWLEDGE AND EXPERIENCE

To be successful in your role, you will have demonstrated and/or acquired the following knowledge and experience:

Qualifications

Relevant bachelor’s degree or Master Degree

Technical skills

§ Must-have

ü Language: working knowledge of Java Core, Junit.

ü IDE/CICD Tools: GIT, Bitbucket, Jenkins, Eclipse, JIRA

ü Knowledge of formal software engineering process throughout lifecycle

§ Writing & reviewing design, requirements, tests and code

§ Debugging/Testing Strategies like blackbox, whitebox approaches

ü Agile methodology: Scrum

ü Devops culture and CICD methodologies

§ Nice-to-have

ü Participated in the software maintenance of the deployed systems and demonstrated proficiency in solving operational IS/IT issues

ü Experience in Test Driven Development, or Domain Driven Development

ü Language: any others like ADA, C++

ü Air Traffic Management domain knowledge

ü Experience in software development in a safety-critical environment

Overview:

We are seeking a motivated and experienced M&E (Mechanical & Electrical) Engineer to join our dynamic team in the construction industry. The successful candidate will play a key role in the planning, design, and implementation of M&E systems in our construction projects, ensuring all works are executed to the highest standards and comply with local regulations.

Key Responsibilities:

• Design and Planning:
• Develop and review M&E designs, drawings, and specifications.
• Collaborate with architects, structural engineers, and other stakeholders to integrate M&E systems seamlessly into the overall project design.
• Conduct feasibility studies and cost estimates for M&E systems.

Project Management:

• Manage and oversee M&E installations and ensure that all works are completed on time and within budget.
• Coordinate with contractors and suppliers to ensure timely delivery and installation of M&E components.
• Monitor project progress and prepare regular reports for stakeholders.
• Quality Assurance and Compliance:
• Ensure all M&E works comply with relevant codes, standards, and regulations.
• Conduct inspections and testing of M&E installations to ensure quality and performance.
• Address and resolve any technical issues or discrepancies promptly.

Technical Support:

• Provide technical support and guidance to the project team and contractors.
• Assist in the preparation of tender documents and evaluation of bids for M&E works.
• Stay updated with the latest industry trends, technologies, and regulations.

Requirements:

• Education:
• Bachelor’s degree in Mechanical Engineering, Electrical Engineering, or a related field.

Experience:

• Minimum of 3-5 years of relevant experience in M&E engineering within the construction industry.
• Proven track record in managing M&E systems in construction projects.

Skills:

• Strong knowledge of local building codes and regulations.
• Proficient in AutoCAD, BIM, and other relevant design software.
• Excellent project management and organizational skills.
• Strong communication and interpersonal skills.
• Ability to work independently and as part of a team.

Certifications:

• Professional Engineer (PE) license is an advantage but not mandatory.

How to Apply:

Interested candidates are invited to submit their resume and cover letter detailing their relevant experience and qualifications to [email protected]

As a Service Engineer, you have to attend to equipment fault at customers’ premises. Liaise with the customer and sub-contractors regarding all aspect on the add-on project activities. Monitor the progress of the work done closely in order to ensure that the schedule and quality of work are met. Also to ensure that all materials and equipment are delivered on time as per schedule for site installation or rectification of fault. To carry out periodic maintenance for our customers.

You should possess a Diploma in Electronics and/or Electrical Engineering with 2-3 years’ hands-on experience in troubleshooting of card access systems, alarm systems, CCTV, etc. With good interpersonal communication skills and a valid Class 3 license. Stand-by duty is required.

Please submit resumes to [email protected] with the following

details in MS Word format:

- Position applying for

- Current remuneration

- Expected remuneration

- Notice period

John Goh Meng Chye

EA License No : 06C4642

EA Reg No : R1102621

We regret that only shortlisted candidates will be notified.

As a Senior Project Engineer, your main responsibility is to lead, supervise, execute and coordinate project activities together with a group of Engineers, Technicians and sub-contractors leading to successful project completion. You will monitor and control projects on schedule, within budgeted cost and quality and safety standards. You will also work closely with the consultant/owner to ensure the project is delivered according to requirements. As a senior, you are also required to perform system programming and troubleshooting during project implementation.

You should possess a Diploma/Higher Nitec in Electrical and/or Electronics in any Engineering related courses, with 3-5 years’ experience in site supervision and coordination with owner, main contractors, and subcontractors, must have experience in alarm, card access and CCTV system installation knowledge. Must be computer literate and knowledge of Risk Management.

Please submit resumes to [email protected] with the following

details in MS Word format:

- Position applying for

- Current remuneration

- Expected remuneration

- Notice period

John Goh Meng Chye

EA License No : 06C4642

EA Reg No : R1102621

We regret that only shortlisted candidates will be notified.

Job Summary

We seek an experienced and motivated Software Quality Engineer to join our forward-thinking tech team. In this role, you'll ensure our platform is reliable and meets high-quality standards. This position allows you to work across teams, shaping and implementing advanced QA processes that support scalable, reliable, and innovative solutions

Responsibilities:

Test Strategy and Planning

- Define and lead comprehensive QA strategies, covering all phases of the software development lifecycle.

- Develop, manage, and execute manual and automated test plans, cases, and scripts to ensure thorough testing.

Automation and Tooling

- Lead the development of automated testing frameworks using Cypress, Playwright or any automation tool for end-to-end test coverage.

- Drive platform scalability by implementing performance and load tests using tools like Gatling, K6, or Jmeter.

Quality Assurance

- Perform contract testing to ensure smooth interaction between microservices.

- Lead regression testing efforts for bug fixes and new features to maintain overall quality.

- Oversee the end-to-end testing pipeline, resolving issues promptly to avoid any delays.

Cross-Functional Collaboration

- Work closely with product managers, developers, and DevOps engineers to meet project requirements and deliver high-quality software.

- Contribute to agile team processes, including sprint planning and other ceremonies, with valuable QA insights.

- Coordinate with QE teammates to prepare and lead weekly deployments, ensuring smooth execution.

Issue Resolution and Reporting

- Accurately document, track, and report software defects, conducting root cause analysis as needed.

- Provide timely and detailed reports on QA activities, testing outcomes, and relevant quality metrics.

Requirements:

- Expertise in software quality assurance, with a strong focus on automation testing (e.g., Cypress, Playwright).

- Demonstrated experience with performance testing tools such as Gatling and Autocannon.

- Proficient in JavaScript (TypeScript) or Java

- Familiar with frontend and backend technologies (e.g., ReactJS, ExpressJS, Gin-gonic), as well as cloud platforms (AWS, Docker, Kubernetes).

- Knowledgeable in CI/CD tools (e.g., GitLab, ArgoCD) and relational databases (MySQL, PostgreSQL).

- Solid understanding of REST and GraphQL APIs, JWT for authentication, and search technologies like Elasticsearch.

- Exposure to additional testing tools and caching systems like Redis.

- Experience with logging and monitoring platforms such as Splunk or OpenSearch.

Qualifications

- Bachelor’s degree

- Strong problem-solving, analytical, and communication skills.

Big Data Engineer

Job Requirement:

• 5 years of hands on work experience in Hadoop, Scala, Pyspark and Python.
• Work with Hadoop Distributed File System (HDFS) to manage and store large datasets
• Utilize tools like Hive, HBase, and Pig to process data in Hadoop
• Set up and manage data pipelines to extract, transform, and load (ETL) large datasets
• Develop and optimize PySpark jobs and Scala-based Spark applications to process and analyze large-scale data
• Integrate data from various sources (relational databases, flat files, APIs, etc.) using Python and Spark.
• Build data models and perform advanced analytics using PySpark, Python libraries and Scala.

Thanks, and Best Regards

Karanam Vijaya Kiran

(EA Registration no: R1443178)

Recruitment Manager

Hand Phone: +65 92333815

Helius Technologies Pte Ltd (EA Licence No: 11C3373)

Job Requirements:

• Degree in Information Technology or equivalent.
• Must have minimum 8-10 years of experience in Java based software development.
• Must have experience in Java8, Springboot, Tomcat, Jboss, Weblogic and Elixir
• Must have experience in XML, Soap and Rest API based application
• Must have sound knowledge on Hibernate, Spring MVC, Java1.7,1.8 and above, Oracle MS SQL and MY SQL database
• Must have experience in Secure code development and scanning for code quality/performance/security
• Good to have experience in Financial Domain working on Payment services/Payment gateway
• Good to have Certifications in Java/Oracle/MSSQL services.
• Hands-on in Source code management using tools like VSTS/TFS
• Excellent written and verbal communications skills

The Sales & Marketing Engineer is charged with responsible for driving BELFOR’s business forward by managing all aspects of sales and marketing, building strong client relationships, and developing strategies to grow our customer base.

As our expertise in disaster recovery and decontamination solutions, you will play a crucial role in helping clients find the right fit for their business needs from our professional services.

Responsibilities:

• Develop and execute sales and marketing strategies to expand business opportunities
• Identify and develop new business opportunities while growing the existing customer base
• Build and maintain strong relationships with clients through active follow-ups and regular site visits, meetings and presentations
• Act as the primary point of contact for customers, ensuring excellent service by collaborating with internal teams to address their needs
• Actively identify seminars, workshops, conferences and exhibitions to fill the engagement and introduce BELFOR to the industry
• Perform “cold-callings”, visitations and other marketing activities to actively promote BELFOR’s present in the industry
• Set and achieve sales goals and quotas to drive business growth

Requirements:

• Good tertiary education with background from engineering and/or commercial discipline
• No less than 7 years of active involvement in marketing and sales development in the B2B aspects
• Proactive, outgoing personality and willing to participate in events and activities
• Excellent communication and presentation skills
• Matured deposit and sensitive to people’s needs
• Ability to work under pressure and minimum supervision
• Self-starter, compliance and strong ethical deposit

Responsibilities:

· Develop and deploy machine learning models: Design, build, and optimize machine learning models and algorithms to solve specific business problems. Collaborate with cross-functional teams to gather requirements, define objectives, and deploy models into production environments.

· Model training and evaluation: Train and fine-tune machine learning models using appropriate algorithms and techniques. Evaluate model performance and identify areas for improvement, employing techniques such as cross-validation, hyperparameter optimization, and ensemble methods.

· Model deployment and integration: Collaborate with software engineers and DevOps teams to deploy machine learning models into production environments. Implement APIs and integrate models with existing systems and applications to enable real-time decision-making.

· Performance monitoring and maintenance: Monitor model performance and address any issues or anomalies that arise. Continuously improve models by refining algorithms, optimizing code, and incorporating feedback from users and stakeholders.

· Data analysis and insights: Perform exploratory data analysis, generate insights, and present findings to stakeholders. Use statistical methods and visualization techniques to communicate complex concepts and patterns effectively.

· Stay up-to-date with the latest advancements: Keep abreast of the latest research and trends in machine learning and artificial intelligence. Evaluate and recommend new tools, libraries, and methodologies to enhance the efficiency and effectiveness of the machine learning workflow.

Requirements:

· Education: Bachelor's or Master's degree in Computer Science, Data Science, Machine Learning, or a related field. An equivalent combination of education and experience will also be considered.

· Experience: At least 2 years’ experience working in a similar role. Hands-on experience in designing, developing, and deploying machine learning models in real-world applications.

· Solid understanding of machine learning algorithms, techniques, and libraries (e.g., TensorFlow, PyTorch, scikit-learn).

· Experience with working on Large Language Models and Generative AI technology is a plus.

Technical skills:

1) Strong programming skills in languages such as Python.

2) Proficiency in machine learning frameworks such as TensorFlow, PyTorch, or Scikit-Learn etc.

3) Solid understanding of Statistical Analysis, Probability Theory, and Hypothesis Testing.

4) Familiarity with machine learning tools on cloud platforms (e.g., AWS, Azure, GCP) and distributed computing frameworks (e.g., Spark) is a plus.

5) Problem-solving and analytical mindset: Ability to analyze complex problems, break them down into solvable components, and develop innovative machine learning solutions. Strong mathematical and analytical skills are essential.

6) Communication and collaboration: Excellent verbal and written communication skills, with the ability to convey technical concepts to both technical and non-technical stakeholders. Proven ability to work collaboratively in a team environment and effectively manage multiple priorities.

7) Adaptability and continuous learning: Willingness to adapt to evolving technologies and learn new tools and techniques. Demonstrated commitment to staying updated with the latest advancements in machine learning and artificial intelligence.

Only shortlisted candidates will be notified.

Please email a copy of your detailed resume to [email protected] for immediate processing.

(EA Reg No: 20C0312)

Purpose of Job

The Product Management Engineer will be responsible for managing the entire product lifecycle from concept through to delivery, ensuring alignment with both customer needs and WEO Corporation's core strengths. The role requires strong collaboration with cross-functional teams, both locally and internationally, to optimise product development, sales strategies, and market competitiveness.

Job Duties

External: Customer & Market Engagement

• Build and maintain strong relationships with global MNC customers, ensuring a deep understanding of their requirements and goals.
• Collaborate with the Sales Team to identify opportunities for increasing sales revenue and market share.
• Monitor industry trends and competitor activities to inform product development and marketing strategies.
• Participate in sales and marketing activities, including overseas exhibitions and promotional campaigns.
• Conduct market research and develop sales strategies to ensure the company's competitiveness both within Singapore and regionally.
• Align customer needs with the company’s core competencies to maintain market leadership.

Internal: Cross-Departmental Collaboration

• Work closely with the Supply Chain team to identify and manage key suppliers, both locally and globally.
• Act as a communication bridge between customers and internal teams, translating customer requirements into product specifications.
• Coordinate with the Sales Team, factories in China and Malaysia, and international R&D and Engineering teams to ensure product development meets customer expectations.
• Lead cross-functional teams on projects as assigned by management, ensuring smooth execution and timely delivery.

Experience:

· Minimum of 3 to 5 years of experience as a Product or Project Engineer.

· Strong communication skills in both English and Chinese, capable of liaising effectively across all levels and functions within the company, as well as with overseas teams and intermediaries.

· Demonstrable ability to understand and analyse market needs, particularly in optics, electronics, or R&D technology integration.

· Independent, proactive, and capable of working autonomously. A demonstrated ability to lead projects and show initiative is essential.

· An interest in the technology, field, and market of optics manufacturing.

Qualifications:

• A background in Engineering is essential, with a preference for candidates with experience in Optics or a related field.
• A Bachelor’s degree in Mechanical Engineering (or equivalent) is required.
• Candidates with a Master's degree or PhD are encouraged to apply.

Other Requirements:

· Advanced proficiency in Microsoft Office, particularly Excel (pivot tables, advanced formulas, etc.), for data analysis and reporting.

· Experience with Product Lifecycle Management (PLM) or Enterprise Resource Planning (ERP) systems is highly preferred.

· Familiarity with CAD (Computer-Aided Design) software, particularly for product design and development (e.g., SolidWorks, AutoCAD).

· Knowledge of industry standards and regulations related to optics, electronics, or precision engineering.

· Understanding of supply chain management and procurement processes for both local and global suppliers.

· Ability to work with project management tools (e.g., Microsoft Project, Trello, Jira) to track progress and manage cross-functional teams.

· Strong understanding of manufacturing processes, particularly in optics or electronics, and integration with product development.

KEY COMPETENCIES REQUIRED FOR THE JOB: (Core & Behavioural)

Core Competencies

• Product Management: Proficiency in managing the lifecycle of a product, from development through to market introduction and optimisation.
• Technical Expertise: Strong technical background in engineering, ideally in optics or electronics, with an ability to integrate advanced technologies into product offerings.
• Project Leadership: Proven ability to lead cross-functional teams, ensuring alignment with business objectives and timely project delivery.

Behavioural Competencies

• Communication Skills: Effective communicator, able to liaise with internal and external stakeholders, bridging technical and business discussions.
• Customer-Focused: Strong customer orientation, with a deep understanding of customer needs and the ability to translate them into product solutions.
• Problem-Solving: Strong analytical and problem-solving skills, with the ability to address challenges proactively.
• Adaptability: Able to thrive in a dynamic environment, demonstrating flexibility and resilience when dealing with changing priorities.

Purpose of Job

The Product Management Engineer will be responsible for managing the entire product lifecycle from concept through to delivery, ensuring alignment with both customer needs and WEO Corporation's core strengths. The role requires strong collaboration with cross-functional teams, both locally and internationally, to optimise product development, sales strategies, and market competitiveness.

Job Duties

External: Customer & Market Engagement

• Build and maintain strong relationships with global MNC customers, ensuring a deep understanding of their requirements and goals.
• Collaborate with the Sales Team to identify opportunities for increasing sales revenue and market share.
• Monitor industry trends and competitor activities to inform product development and marketing strategies.
• Participate in sales and marketing activities, including overseas exhibitions and promotional campaigns.
• Conduct market research and develop sales strategies to ensure the company's competitiveness both within Singapore and regionally.
• Align customer needs with the company’s core competencies to maintain market leadership.

Internal: Cross-Departmental Collaboration

• Work closely with the Supply Chain team to identify and manage key suppliers, both locally and globally.
• Act as a communication bridge between customers and internal teams, translating customer requirements into product specifications.
• Coordinate with the Sales Team, factories in China and Malaysia, and international R&D and Engineering teams to ensure product development meets customer expectations.
• Lead cross-functional teams on projects as assigned by management, ensuring smooth execution and timely delivery.

Experience:

· Minimum of 3 to 5 years of experience as a Product or Project Engineer.

· Strong communication skills in both English and Chinese, capable of liaising effectively across all levels and functions within the company, as well as with overseas teams and intermediaries.

· Demonstrable ability to understand and analyse market needs, particularly in optics, electronics, or R&D technology integration.

· Independent, proactive, and capable of working autonomously. A demonstrated ability to lead projects and show initiative is essential.

· An interest in the technology, field, and market of optics manufacturing.

Qualifications:

• A background in Engineering is essential, with a preference for candidates with experience in Optics or a related field.
• A Bachelor’s degree in Mechanical Engineering (or equivalent) is required.
• Candidates with a Master's degree or PhD are encouraged to apply.

Other Requirements:

· Advanced proficiency in Microsoft Office, particularly Excel (pivot tables, advanced formulas, etc.), for data analysis and reporting.

· Experience with Product Lifecycle Management (PLM) or Enterprise Resource Planning (ERP) systems is highly preferred.

· Familiarity with CAD (Computer-Aided Design) software, particularly for product design and development (e.g., SolidWorks, AutoCAD).

· Knowledge of industry standards and regulations related to optics, electronics, or precision engineering.

· Understanding of supply chain management and procurement processes for both local and global suppliers.

· Ability to work with project management tools (e.g., Microsoft Project, Trello, Jira) to track progress and manage cross-functional teams.

· Strong understanding of manufacturing processes, particularly in optics or electronics, and integration with product development.

KEY COMPETENCIES REQUIRED FOR THE JOB: (Core & Behavioural)

Core Competencies

• Product Management: Proficiency in managing the lifecycle of a product, from development through to market introduction and optimisation.
• Technical Expertise: Strong technical background in engineering, ideally in optics or electronics, with an ability to integrate advanced technologies into product offerings.
• Project Leadership: Proven ability to lead cross-functional teams, ensuring alignment with business objectives and timely project delivery.

Behavioural Competencies

• Communication Skills: Effective communicator, able to liaise with internal and external stakeholders, bridging technical and business discussions.
• Customer-Focused: Strong customer orientation, with a deep understanding of customer needs and the ability to translate them into product solutions.
• Problem-Solving: Strong analytical and problem-solving skills, with the ability to address challenges proactively.
• Adaptability: Able to thrive in a dynamic environment, demonstrating flexibility and resilience when dealing with changing priorities.