As a University of Applied Learning, SIT works closely with industry in our research pursuits. Our research staff will have the opportunity to be equipped with applied research skill sets that are relevant to industry demands while working on research projects in SIT.

The primary responsibility of this role is to deliver on an industry innovation research project where you will be part of the research team to perform modelling and real-time simulation of electric vessel’s onboard microgrid and propulsion system.

Key Responsibilities

• Participate in and manage the research project with Principal Investigator (PI), Co-PI and the research team members to develop onboard microgrid simulation models with energy management systems as well as to plan and test the relevant hardware systems.
• Work with research team to deliver the work scope and undertake these responsibilities in the project.
  Work Responsibilities:
  1. Develop detailed electrical models of the microgrid (power system) of various e-vessels based on the concept design in a simulation environment such as Matlab/Simulink.
  2. Design and develop an intelligent energy management system for the e-vessel microgrid for coordinated control of multiple energy sources considering cost, carbon, and operation constraints.
  3. Operate the simulated electrical model with EMS controller to perform simulations for various cases to demonstrate performance and recommend improvements at unit, sub-system and whole system level.
  4. Implement and carry out simulation studies for onboard microgrid and connection to shore charging infrastructure.
• Recommend efficient and reliable power system architecture(s) with other merits of high-density and light-weight.
• Test the relevant power electronics and drives system hardware and troubleshoot the challenging problems.
• Carry out Risk Assessment, and ensure compliance with Work, Safety and Health Regulations.
• Coordinate procurement and liaison with vendors/suppliers.
• Work independently, as well as within a team, to ensure proper operation and maintenance of equipment and assist in laboratory management.
• Mentor students involved in the research project
• For those hired at senior levels, management responsibilities may be included

Job Requirements

• Have a Master’s or PhD’s degree in Electrical Engineering or equivalent from a recognized University. Major in Power Engineering will be advantageous.
• Minimum 3 years of relevant experience in modelling and energy management algorithm development using MATLAB/Simulink for microgrid applications.
• Knowledge of power electronics, drives, and control is highly preferred. Hardware testing experience will be advantageous.
• Have experience and commitment to participate in project meetings.
• Self-motivated team player and good project management skills.
• Excellent writing, communication, presentation, and interpersonal skills.

Key Competencies

• Able to build and maintain strong working relationships with people within and external to the university.
• Self-directed learner who believes in continuous learning and development
• Proficient in technical writing and presentation
• Possess strong analytical and critical thinking skills
• Show strong initiative and take ownership of work

Role:

Production Engineer (Mechanical / Manufacturing)

• Singapore Based (Senoko, Sembawang area, company transport provided)
• 5 Days work per week (8am to 5.30pm)
• Salary: Up to $3100 + Allowance + AWS + VB
• Degree in Mechanical/Manufacturing Engineering or equivalent + 1 year with relevant experience is an added advantage.
• Knowledge on TS/IATF 16949, OHSAS18001, ISO14001, SPC, FMEA and TPM will be added advantage.
• Require putting on jumpsuit and protective mask as Personal Protective Equipment whenever it is necessary. + Willing to work overtime when needed
• Career Progression Opportunities

Responsibilities

• Responsible for production operation activities to ensure smooth and efficient manufacturing process.
• Liaise with cross functional department on effective corrective/preventive actions, including carry out improvement activities such as process optimization, benchmarking, etc through various statistical tools and software.
• Handle audit in accordance with TS/IATF & ISO and OHSAS requirements

#SCR-vicky-wee

✅ Wee Yuan Huan
✅ Reg No: R21100383
✅ The Supreme HR Advisory Pte Ltd
✅ EA No: 14C7279

• Mentorship, guidance, and training will 100% be provided
• Great for fresh grads who want to start out in the engineering field

• Responsibilities:
• Design, prepare shop drawing, methods statements, quality installation, inspection, testing and commissioning, documentation works for BMS system.
• Site coordination, project schedule planning, coordinate site works
• Design and deploy BMS controlling and building automation system.
• Project Management and attend project meeting.
• Provide training to customers.
• Provide testing and commissioning services

Requirements:

• Min Diploma / Degree in Engineering (Mechanical / Electrical Engineering / Construction / Building related)
• Able to define BMS project work scope, requirements and specifications, and identify, allocate resources for executing the project from start to completion.

HOW TO APPLY:

Simply submit your application with your updated Resume in MS Word Format to Ashwin Vivek Vinod (EA Personnel Reg. No.: R22111690) (BEP) by clicking the ‘Apply link’ or call your friendly Consultant, Ashwin Vivek Vinod, at 6590 9957 or 9178 0355 for a confidential discussion.

Please click APPLY NOW button to submit your application

Please indicate the below information in your resume:

• Current & Expected salary
• Reason(s) for leaving
• Availability to commence work

We regret only short listed candidate will be notified. All applications will be treated with the strictest confidence.

YOUR SUCCESS IS OUR ACHIEVEMENT!

Notice:

We regret that only short-listed candidates will be notified. All applications will be treated with the strictest confidence.

By submitting any application or resume to us, you will be deemed to have read & agreed to the terms of our Privacy Policy and consented to us collecting, using, retaining, and disclosing your personal information to prospective employers for their consideration, and for our marketing EDMs which you may opt-out by unsubscribing in the mailer. You may refer to and access our website at www.achievegroup.asia/privacy-policy/ for more information.

Cessation of Collection of full NRIC Numbers:

In compliance with the Personal Data Protection Act and commitment to protect candidates’ personal data, Achieve Group will cease to collect, process or use full NRIC numbers during our screening and job application process.

Kindly ensure your resumes provided to us does not contain your full NRIC number and full home address during your job application.

IT Support Engineer

• Salary Range: $4,000 - $4,500
• Working Days: 5 Days Mon-Fri 8.30AM-6.00PM
• Location: Siglap

Job Summary

• Provide 1st and 2nd Level IT Support to end-users
• Manage IT assets through procurement, tracking, maintenance, refresh/renewal and disposal/ termination.
• Provide assistance in the implementation of new end-user computing technologies

Responsibilities:

• Provide 1st and 2nd Level IT Support to end-users
• Provide end-user IT support for both local and remote locations daily to ensure smooth business operation including end-user computing device performance monitoring
• Perform installation, configuration and maintenance of computers, workstations, applications and other related equipment and devices
• Perform IT asset lifecycle management including tech refresh, preventive maintenance (Eg. Laptops / Printers) and software license monitoring
• Responsible for the procurement of IT equipment, software and related products including administering procurement processes and supporting in requirements scoping and evaluation
• Manage IT vendors (service quality, feedback, improvements) and service contracts
• Provide assistance in the implementation of new end-user computing technologies
• Any other IT duties as assigned

Requirements:

• Recognized Diploma or Degree in Information Technology or equivalent
• Minimum 3 years of experience in providing IT support to end- user community
• Experienced in troubleshooting IT issues at L1/L2 support levels and escalating to higher levels of IT support

☎️ Whatsapp +6588278652 (Hym)

Goh Hym Yien Reg No: R24121939

The Supreme Hr Advisory Pte Ltd EA No: 14C7279

About HOYA Surgical Optics (HSO)

HOYA Surgical Optics (HSO) is the globally leading Preloaded Intraocular Lens (IOL) focused company that provides technologies and solutions that exceed expectations, enabling ophthalmic surgeons to focus on restoring sight. We are dedicated to improving the vision and quality of life for millions of people suffering from cataract, and helping them celebrate life visually.

HSO empowers cataract surgeons all over the world with innovative ophthalmic devices and services, with an attention to detail that helps them achieve better surgical outcomes and better practice results. Our commitment to delivering these results is grounded upon a quality management system that is continuously improving to meet changing global regulatory requirements and our entrepreneurial drive to be the brand of first choice.

At HSO, People is the key factor to our success. We aim to create a conducive work environment for our employees around the globe, and to promote an inclusive culture based on our core values – Excellence, Passion, Innovative, Collaboration, and Accountability.

HSO way of working

In fulfilling our roles, we are

• Accountable for our own capabilities and development,
• Focused on delivering results without excuses, and
• Alive to the sensitivities, risk, and impact we have on others and work in a way that helps others do their work effectively.
• We are looking for people who
• See beyond themselves and are impact-focused,
• Consider the needs, challenges, and objectives of every person with whom they interact, and
• Exhibit positive reinforcement to help others succeed.

About the role

Works closely with and have impact on: Global Research & Development (R&D), Post Market Surveillance, and Global Regulatory Affairs (RA) Teams

Reports to: Senior Manager QA R&D

Function: Global QA & Compliance Organization

Work Location/Site: Singapore / Global Headquarters

Role Overview

This position is responsible to ensure that products meet quality goals and regulatory requirements, including but not limited to FDA Regulations, ISO 13485, EU MDR requirements, and Risk Management per ISO 14971 and maintain compliance of the Quality Management System (QMS).

Duties and Responsibilities

• Partner with R&D teams in the USA, Japan, and Singapore to ensure that design control is completed in accordance with procedures, WI, regulatory requirements, and assure that required outputs have been completed
• Execute risk management for devices, processes, and provide the assessment results from product development through to the launch
• Maintain and update risk management files with Global R&D/Manufacturing Engineering (ME) teams to support product development (Risk Management Plans, Risk Control Log, Benefit Risk Assessment Risk Management Report, xFMEA, etc.), and act as the Risk Management expert
• Assist in the review and approval of design development plans, verification and validation protocols, reports, master V&V plans and reports, and design transfer
• Review and approve design verification test protocols, reports and data from a logical point of view (Compliance, rationale, objectiveness and statistics)
• Partner within Quality and R&D to ensure design control documentation (Risk Management, Traceability/Linkages) & design change control requirements are met
• Review and approve biocompatibility protocols and reports
• Ensure compliance of IQ, OQ, tests method validation, Standard Operating procedures and work instructions regarding product development
• Maintain compliance to QMS procedures of the R&D Singapore site, and support the Singapore R&D Site - QA
• Support External audits by competent authorities and notified bodies
• Support internal audits at the local site, and other sites as required
• Review and approve other quality documents (e.g., IQ, OQ, PQ, WI, etc) within areas of responsibility
• Propose and execute quality/process improvements. Write/review policies/ processes/ procedures and related documents
• Manage and monitor the progress of the calibration and maintenance of testing equipment. Ensure calibration or maintenance records satisfy regulatory and QMS requirements (act as Equipment Control Administrator in Singapore)
• Participate in development projects and change control request meetings to support the resolution of engineering issues
• Collaborate with the post-market surveillance team and complaints investigation teams to maintain risk management process throughout a product’s lifecycle
• Provide support for other quality activities and improvement initiatives, quality data collection and trending, CAPAs, change controls, training, etc.
• Support initiatives as identified by management to support QMS and other regulatory requirements in Singapore

Requirements

Experience

• At least 4+ years of Industry experience working as QE Engineer in Medical Device/ Pharmaceutical product or optical engineering business field
• Experience in test method validation
• Experience in Design control, Design Transfer, Design and Development Process
• Demonstrated knowledge of Risk Management (ISO14971), Design control, Design and Development Process and Quality System (any one of ISO13485).
• Understanding and Knowledge of biocompatibility studies
• Experience in coordination and planning of complex activities and ability to identify and resolve complex problems through effective use of technical and interpersonal skills
• Product development experience (e.g. approaches for definition of requirements and specification setting for verification and validation). Practical experience in design control and risk management
• Effective use of oral and written communication skills to clearly communicate the quality position, and the actions necessary to resolve issues
• Interpersonal, team, leadership, and negotiation skills to handle conflicting priorities
• Strong oral and written communication skills, excellent interpersonal and cross-cultural skills required
• Capable of clearly presenting and justifying quality requirements to management
• Accreditation by a professional body is highly desirable. Examples include American Society for Quality (ASQ) Certified Quality Auditor (CQA) or Certified Quality Engineer (CQE)

Skills/Accreditations

• Smooth communication ability
• Business software skills (e.g. Word, Excel and Power point)
• Experience with statistical software such as Minitab
• Voluntary working attitude with a creative idea
• Passionate working attitude to pursue a goal with patience.
• Flexibility for changes

Academic Qualifications

• A bachelor’s degree or higher in Chemical, Bioengineering, Mechanical, Optical Engineering or related fields.

Travel requirements

• 2-3 international travel annually mainly Thailand.

By submitting your application, you consent to HOYA Group collecting, disclosing, and retaining your personal data for employment assessment and verification purposes.

If you are shortlisted, we will contact you within three weeks of your application. Thank you for your application and understanding.

We are looking for a Staff Analog Layout Engineer to contribute to the development of High-Speed Connectivity, Broadband Analog and Computing/Storage-Memory Data-Transport products (including functional blocks such as high-speed digital, multi-GHz ADC/DAC, PLL/DLL serial and parallel I/O, and clock generation/distribution for custom ICs). The candidate must have a proven record of laying out high-performance analog circuits in state-of-the-art CMOS process technologies, successfully performed top-level integrations, and placed products into volume production multiple times.

Requirements

• Bachelor’s degree in Computer Science, Electrical Engineering or related fields and at least 5+ years of related professional experience.
• Master’s degree in Computer Science, Electrical Engineering or related fields with 3+ professional experience.
• Deep understanding of layout methodology from initial chip planning to tape-out.
• Deep understanding parasitic optimizing in layout
• Experiences in advanced process technology and Fin-FET is preferable.
• Have a high level of proficiency in interpretation of CALIBRE DRC, ERC, LVS, etc. reports.
• Have a high-level proficiency/knowledge of Synopsys or CADENCE layout entry tools.
• Programming skills in any of the following are a plus: Skill or Ample or Perl, etc.
• Strong technical and analytical background, problem solving skills, etc.
• Fluent in English

• Singapore Based (Bukit Merah)
• 5 Days 8.30am to 5.30pm
• Salary - $2500 to $3500 (Depends on experience)
• Nitec or Diploma in Electrical Engineering or Equivalent; At least 1 year experience in sales/customer service.
• Career Progression Opportunities

Requirements

• Nitec or Diploma in Electrical Engineering or Equivalent
• At least on year experience in sales/customer service
• Electrical Knowledge

Job scope

• Your job and responsibilities include support sales personnel for pre-sales activities, proposing solution that suits customer needs & resolve related solution for site preparation, installation, start-up, commissioning, repair and maintenance of Electrical Power System, Structural cabling, Fire suppression system, UPS, Security Access and CCTV Monitoring System etc.
• To supervise and oversee the work progress of project sites. This includes attending to site meeting, coordinating with appointed sub-contractors of various services to see to a smooth completion of projects.
• You will be assisting the Electrical Service Department in providing technical support to our staff, customers, and dealers.
• Prepare and maintain all project management documentation in accordance with company’s best practices.
• Planning and monitoring the project to ensure successful completion within planned timeline as well as status of progress-in-work and report all matters related to project and services.
• You are required to perform a complete in-house testing of Power equipment’s.
• Answer and attend to service calls, fault-finding, repair and troubleshooting of Electrical System and Power equipment malfunction.
• Establish and maintain excellent relationships with the customer project team, supplier, sub-contractors, and clients.
• Coordinate and liaise with PEs and/or site supervisors on detail drawings, layout planning and understanding of site requirements.
• Prepare, submit, and follow up with applications to the relevant authorities or building management where required.
• Preparation of electrical products data & engineering drawing in AutoCAD (2D, 3D).
• You may be assigned with other job duties and functions as may be instructed from time to time by your superior or the management.

Kylen Seah Reg No: R24124248

The Supreme HR Advisory Pte Ltd EA No: 14C7279

Fabrica AI is reinventing how robots are developed. Currently novel robots take 5-20 years. We are building a design automation platform to bring it down to a month, and have already demonstrated significant progress by developing tile grouting robots in record time. Robotics simulation and reinforcement learning has been advancing a lot making it 1000x cheaper to train robots compared to 5 years ago, and as Jensen Huang said at Nvidia GTC 2024, "the ChatGPT moment for robotics may be just around the corner." A couple other companies are building on the same paradigm shift but we are the only ones using it to automate hardware design, not just software.

Building robots and a design automation platform together brings great synergy - the platform helps us develop robots faster than anyone else and the robots allow us to gather data and do experiments at scale. Data gathering can be done through partnerships with other robotics companies, but doing experiments is crucial for grounding the platform in reality and ensuring its usefulness. The grouting robots are already deploying daily at construction sites and bringing value to clients. We are currently negotiating sales worth around 500k USD. With manufacturing cost multiple times lower than companies using a traditional robotic arm, our robots have an ROI in weeks. Our robot is also small and simple to use, operating from a single button without the need to upload floorplans or do any complex setup. Soon we would be expanding into other simple and valuable robots for the construction industry.

We’ve raised over 2.5m USD from Hoxton Ventures, Credo Ventures, our Professor from Cambridge University, Woh Hup, and the owner of BHCC (listed construction company). We’ve 2500sqft of space in Singapore where we have over 20 team members, and 1200sqft of space in Czechia where we have our software team.

Jakub Suchanek (CEO) has an engineering degree from the University of Cambridge and experience working on self-driving cars at Wayve and machine learning at Granta Innovation and Wacker. He is a worldwide winner of NASA SpaceApps and has won bronze medals in International Olympiads in Informatics and Physics.

Ronald Luc (CTO) earned a degree in Math and Computer Science from Masaryk University, where he was a teaching assistant, and supervised several deep learning theses. He has years of industry experience in both machine learning and self driving cars. With Jakub he won TechFest Munich, one of the EU’s top hackathons; and represented Czechia at the International Olympiad in Informatics.

Keefe Wayne Teo (COO & CFO), a University of Cambridge engineering graduate, served as president of Hackbridge.io, promoting entrepreneurship in tech. He has 100+ citations in research journals and four papers on sustainable energy. He previously worked at Entrepreneur First and has business development experience from other companies.

Website: https://www.fabrica.ai/ (and various press releases, awards, etc.)
Latest Grouting Robot Demo: https://www.youtube.com/watch?v=AVWjmaMuYM0

Fabricator videos

https://www.youtube.com/watch?v=4aoQ4QaEOPQ

https://www.youtube.com/watch?v=xnENP7zWzEM

https://youtu.be/qXpkFeEidac

https://www.youtube.com/watch?v=5SBiEBLMQ9k

Your internship would revolve around real-world industry deployments taking us from a TRL of 7 to 9. You may be remunerated with a combination of salary and share options. As an SGInnovate partner company, we can offer a monthly S$3000 SGD in stipend under the SGI Summation program for undergraduates, more for masters, PhD students. The following tracks are available, you would probably be doing a couple of them up to your preference, with examples of what has been done by previous interns:

Your role will include (*you don’t have to be proficient for all of them*):

Core responsibilities:

• PCB, electronics design
  • Working with both hobbyist and industrial microcontrollers, single board computers, motor drivers etc.
  • Integrating motor systems of different types (DC, BLDC, with encoder feedback…), sensor modules etc.
  • PCB design
• Embedded programming

Possible additional responsibilities:

• Testing our robot on construction sites
• Managing external PCB production
• Harness design
• Overseeing a team doing all the above

Requirements:

• Experience with electronics design and embedded software at at least one industrial level project
• Value the direct impact on the product and proximity to clients at a startup and the growth potential of a startup more than having a stable job at a reputable company
• Willing to work without a very well defined job scope and willing to adapt to changes week on week
• Ability to think of metrics to measure progress and deciding based on back on the envelope calculations
• Keenness to do more than is expected, impact driven, past side projects
• Excited about robotics and similar technical areas and exploring them in work and other projects
• Growth mindset driven

Our development process is very iterative and agile. Thus your role/tasks is/are likely to evolve over time. You would play a significant part in deciding how your work would contribute to our overall goals. Besides, a lot of testing has to be done on a construction site. If you like this process, you’d be a good fit for us. Check out the link above for more information, and send your CV to [email protected]

Element has an opportunity for an Engineer to join our rapidly expanding team in Singapore

In this role , you will perform variety of routine and non-routine testing assignments within civil testing operations and esure timely and accurate test results under minimal direct supervision

This role is based in Sungei Kadut Loop , Singapore.

Job Duties:

• Be accountable for accurate and timely release of testing data to customers and oversee standard and/or routine technical problem solving activities
• Interact with customers on technical issues and questions and provide input and support on business development opportunities with new or existing customers
• Provide formal and informal presentations on conventional and/or routine testing to a wide range of stakeholders
• Assist in the professional development of novice technicians and engineers within the local laboratory and utilize an assortment of skill, methods, procedures and materials in advanced testing analysis
• Be adept at drawing on internal knowledge as well as industry and/or academic resources in reaching testing conclusions

Job Requirements:

• Possess a Bachelors of Science degree in a science or testing related field with a minimum of 2 years’ pertinent post degree engineering experience, or advanced academic/professional qualifications
• In-depth understanding of testing concepts and able to apply academic knowledge within the context of Element’s business
• A team player with advanced computer and communication skills

HOW TO APPLY:

Interested applicants, please submit your updated resume to [email protected]

Please state your availability, current & expected salaries for processing purpose. All applications will be treated in the strictest confidence. We regret that only shortlisted candidates will be notified.

• Assist, manage and review Project Management Plan to monitor all aspects of project including progress, cost management (i.e. Claims & VO verification and procurement negotiation), quality, safety, human resource, environmental and etc.
• Assist Project Director and Project Manager in conceptualizing and executing project schedule, cost, procurement and quality management of project.
• Assist, manage and review project management tool and produce reports to monitor progress of project and identify project critical path.
• Assist in tracking of Architectural Instructions issued and counter propose if necessary.
• Tracks, Interpret and Solve any Drawings discrepancies (RFI) between all Trades.
• Management of project staffs and assists them in fulfilling their potential and beyond.
• Monitoring and ensuring sub-contractors of different trades are able to proceed with their works on site.
• Checking and monitoring wastage of materials on site to ensure no unnecessary wastage of materials.
• Assist PM to chair various committee meetings such as weekly sub-contractors’ coordination meeting, safety committee meeting and etc.
• Leads Weekly Technical Meetings with consultants and client representatives to resolve issues between Architectural, Structural and M&E trades
• Together with PM prepares and presents Biweekly Project Schedule Meeting to Client representatives, consultants and Client QS
• Independently ownership, coordinate & monitor of all ERSS works and relating submissions and requirements between designer and on-site implementation up to dismantling.
• To liaise and coordinate with professional designer for all temporary shoring works and permanent structure works.
• Liaise with clients, consultants, government authorities and sub-contractors to ensure work progression is on schedule and project milestones / deliverables completed according to shareholders’ expectation.
• Hands-on site day-to-day coordination on architectural, structural, M&E, interior design and fit out works, inclusive resolving all RFI
• Acts as liaison between surrounding neighbourhoods (all nearby properties / owners)
• Preparation of official letters to sub-contractors, consultants and client.
• Carry-out structural inspection with RTO/RE
• Other ad-hoc activities as when required by the company.

Responsible for maintenance/trouble shooting of plant equipment (mechanical and electrical systems) at water treatment and waste water treatent plants.

Prepare technical reports and submission to the clients.

Purchasing of materials as required.

Good technical knowledge and codes of safe work practice.

Maintain good housekeeping.

Minimum Diploma qualification.

Must possess WSQ certificates (BCSS, Confned Space Supervisor/Assessor, WAH)

Driving Licence Class 3 preferred.

5 years relevant working experience at Public Utilities Board (PUB) waterworks and water reclamation plants.

Job Description

• Undertake new product development or be involved in sustaining engineering/CIPs.

• Research new automation technologies and continuous improvement for performance and system optimization.

• Develop plan for equipment installation and validation at customer site or main business site.

• Perform a full lifecycle product development (design, develop, test prototypes, manufacture and implement).

• Design for manufacturing (DFM), design for assembly (DFA) and Concurrent engineering.

• Developed fabrication drawings, assembly drawings and layout drawings.

• Selection and sizing of standard components available off the shelf.

• Documentation: Machine BOM, Work Instruction, PPT for presentation.

• Work with customer to gather requirements, review designs with customers, gather feedback and create execution plan.

• Work with customers and team to solve problems during installation and volume manufacturing.

• Drive equipment optimization, quality assurance, cost reduction activities and improve user experience activities.

• Estimate budget and scope of project.

• Other duties/activities as assigned by management.

Requirements

• Bachelor’s degree in Mechanical Engineering or relevant degree.

• Proficient in using 3D CAD modelling Creo (Creo and Solidworks will act as advantages) and associated Finite Element Analysis tools.

• Ability to read & to interpret engineering data, scientific journals, technical procedures, international test standards & type approval specifications.

• Great attitude and desire for self-improvement and independent problem solving.

• Desire to learn and implement product testing, validation and qualification methodologies.

• Willingness, ability, and desire to travel internationally to work with customers and team members.

• Good track record in:

1. Structural, kinematics and dynamic analysis and FEA simulation.

2. Strong in thermodynamic.

3. Geometrical tolerance and dimensional analysis (e.g. stack up error).

4. Engineering material selection.

5. Design troubleshooting.

6. Application of analysis tools like FMEA, DOE.

3 years and above of experience is preferred, fresh grads are welcome to apply.

Experience in Automation will be advantageous.

• Responsible for all major mechanical and electrical and instrumentation equipment
• Lead a team of technical executives/technicians for troubleshooting works
• Manage the purchase of major supply and repair items alongside with supervision and execution of preventive and condition monitoring of major electrical equipment
• Handle hands-on preventive maintenance and breakdown maintenance work
• Coordination with clients and subcontractors to meet the site/project requirements
• Carry out rectification of faults within a specified time
• In-charge of troubleshooting of M&E system
• Responsible for planning, execution and supervision of all facilities management and operational activities
• Responsible for project cost control and service standards
• Any other ad hoc duties assigned

Job Requirements

• Degree or Diploma in Engineering.
• 3-5 years of relevant working experience
• Technical knowledge of M&E systems(including, but not limited to, fire protection systems, AV systems and ACMV systems) is an added advantage
• Able to perform shift work if required
• Preventive Maintenance Troubleshooting

• MNC Company
• Basic $3500 - $4000 + Allowance + AWS + Variable Bonus
• Excellent Welfare and Benefits + Career progression
• Working location: Jurong East
• Working days: Monday to Friday
• Working hours: 8.30am – 5.30pm

Job Responsibilities:

• Perform regular maintenance and carry out diagnostic analysis for trouble shooting and repair work
• Handling of measurement and detection equipment for military and homeland security
• Handle sales product enquiries
• Manage post-sales delivery of equipment
• Prepare basic reports
• Any other tasks assigned by superior

Job Requirements:

• Possess minimum Higher Nitec and/or Diploma in Electronics and/or Electrical Engineering or relevant field with 2-3 years of relevant experience
• Possess IT software installation and configuration skills will be an added advantage

Candidates are encouraged to apply this position via Apply Now button with the following information in the resume

• Work experiences and job responsibilities
• Current and Expected salary
• Reason for leaving
• Date of availability
• Education background

We regret that only shortlisted candidates will be contacted.

Leong Wei Ling (R23117584)

EA Recruitment Pte Ltd

EA License No: 21C0492

• Company located at Woodlands

• Working hour: 8:30am – 5:30pm (Monday – Friday)

• Variable Bonus + Excellent Welfare

• Well Established Industrial Automation Company (MNC)

Job Scope

• Analyze project requirements for industrial robotic equipment/machines.
• Design, and test electrical control systems for industrial automation.
• Create detailed electrical schematic drawings using E3 (or ePLAN as a second option).
• Source and select control components based on project specifications.
• Execute control system setup, including IO system configuration, servo and step drive setup, and axis tuning.
• Provide on-site technical support during the installation and commissioning of robotic equipment/machines.
• Troubleshoot and resolve electrical and control system issues.
• Maintain detailed documentation throughout the project lifecycle.

Requirement

• Degree in Electrical Engineering / Control Systems Engineering or related disciplines
• 2 to 4 years of relevant experiences and roles in Industrial Automation
• Experience in programming motion controllers, robots, or touch panels is an added advantage

Candidates are encouraged to apply this position via Apply Now button with the following information in the resume:

• Work experiences and job responsibilities
• Current and Expected salary
• Reason for leaving
• Date of availability
• Education background

We regret that only shortlisted candidates will be contacted.

KHOO SOT MEI (R21102604)

EA Recruitment Pte Ltd

EA License No: 21C0492

Job Description:

• Ensure chiller systems operate at optimal performance and efficiency.
• Provide exceptional service by addressing client inquiries and concerns about chiller operations and maintenance.
• Diagnose mechanical, electrical, and control system issues, implementing effective solutions.
• Educate clients on proper operation and maintenance practices to enhance the lifespan of their chiller systems.
• Prepare detailed reports outlining service activities, findings, and recommendations for improvements.
• Execute commissioning processes for new chiller installations, ensuring proper setup and functionality.
• Work with MHI agents, customers, and contractors to verify system performance and compliance with specifications.
• Foster collaborative relationships with contractors to encourage teamwork and shared problem-solving.
• Adhere to safety protocols and regulations, conducting safety briefings to ensure understanding of responsibilities.
• Perform field-based tasks in various environmental conditions, including outdoor settings.
• Be available for chiller breakdown calls during assigned standby shifts.

Job Requirement:

• Diploma and Degree
• 3-5 years of proven experience in chiller maintenance, commissioning, or related HVAC roles.
• Strong technical knowledge of chiller systems, HVAC principles, and electrical controls.
• Excellent problem-solving skills with a keen attention to detail.
• Strong communication and interpersonal skills for effective interaction with clients and team members.
  Ability to work independently and manage time efficiently.
• Completion of Building Construction Supervisors Safety Courses or equivalent certifications

HOW TO APPLY:

Interested applicants, please click on “Apply Now” and provide the below details in your resume.

We regret only shortlisted candidates will be notified.

Trust Recruit Pte Ltd

EA License No: 19C9950

EA Personnel: Ding Xin Er

EA Personnel Reg No: R22106669

WhatsApp: +65 90820021 (Kyler)

Email: [email protected]

• Penjuru (Transport Pickup Provided at: Jurong East, Choa Chu Kang, Bishan & Serangoon)
• Monday - Friday: 8.30am to 6.00pm
• $ 4,000 - $6,000

Key Responsibilities

• Electrical Design: Collaborate on system requirements, develop schematics, select components, and design control logic for marine vessel propulsion/control systems.
• Commissioning and Integration: Oversee installation, testing, and validation of electrical systems.
• System Optimization: Analyze performance, identify optimization opportunities, and implement innovative solutions.
• Documentation and Reporting: Create technical documentation and commissioning reports.
• Regulatory Compliance and Safety: Ensure compliance with maritime regulations, industry standards, and safety guidelines.

Requirements

• Diploma/Bachelor's in Electrical Engineering or related field
• Relevant experience in electrical design/commissioning (marine propulsion/control systems preferred)
• Proficiency in electrical design software (AutoCAD Electrical, EPLAN) and simulation tools
• Knowledge of marine electrical systems, industry standards (ABS, DNV, IMO), and regulations
• Requires to travel overseas for commissioning activities (shipyards/vessels)

The Supreme HR Advisory Pte. Ltd | 14C7279

Gan Kai Le | R23112683

Mechanical Engineer requirements

Salary Range $3,500 - $5,000

Key Responsibilities

• Involved in full cycle mechanical design from conceptualization, designing, research and development.

· Evaluate final product’s overall performance, testing, reliability, safety and commissioning.

• Define design approach for new product and platforms and generate design specifications
• Execute new product designs personally, and oversee outsourced resources where appropriate
• Execute quick turn prototyping, 3D samples, debugging, verification testing, and performance characterization of new designs
• Support current platforms with enhancements and improvements where needed
• Support manufacturing engineering as necessary and provide appropriate tools and techniques to the service organization
• Execute/manage compliance testing and documentation
• Adhere to best practices for documentation and version control

Minimum Requirements and Qualifications

• Bachelor's degree in Mechanical / Mechatronics Engineering
• 5+ years hands-on design and development of Analog and Digital circuitry and/or embedded systems.
• Knowledge & Skills in SolidWorks, 2D and 3D software or more.
• Proficient with laboratory instrumentation, tooling fabrication, die-casting, extrusion, plastic injection moulding and metal stamping process.
• Utilize various tools of specialization (CREO/ DFM/ DFMEA/ Tolerance Analysis/ Simulation etc.) to design, validate and improve existing designs
• Proficient with MS Word, MS Excel, PowerPoint

Additional Qualifications

• Experience in LED, Automation , Thermal and optical design

• Performs specific and moderate portions of a broader assignment of an experienced engineer.
• Gathers and correlates basic engineering data using established and well-defined procedures.
• Works on detailed or routine engineering assignments involving calculations and relatively simple tests.
• Proposes approach to solve new problems encountered using modifications of standard procedures or methods developed in previous assignements.
• Identifies discrepancies in results.
• Provides guidance to entry level engineers.
• Performs work in accordance with agreed upon budget and schedule with little supervision.
• Independently performs all the tasks necessary to complete primary design
• elements for engineering works. 
• Performance at this level requires developmental experience in a professional position.

Responsibilities:

• To assist the engineers to sustain and improve all equipment performance indices to meet operations goals.
• Perform shift duties to support the running of Production in the Module and ensure equipment readiness and worthiness for production
• Perform scheduled equipment preventive maintenance (PM), calibration and troubleshoot equipment-related problems on a timely basis to minimize equipment downtime
• Assist engineers in the installation and hook-up of new equipment
• Perform task with zero error
• Prepare consumables/preventive maintenance parts to ensure adequate provision
• Participate in continuous improvement programs to improve productivity and output quality of the Module, and constantly monitor and feedback to Engineers to improve performance of equipment to meet Module objectives
• Assist in implementing process improvement projects
• Ensure good housekeeping and safety practices in the Fab
• Safe custody of tools, equipment and other properties belonging to the Module
• Assist new associate engineers on their on-the-job-training (OJT) by acting as their buddy

Requirements:

• Diploma in Electrical / Electronics / Mechatronics / Mechanical/ Microelectronics / Chemical Process Technology or equivalent
• Basic engineering knowledge, which may include semiconductor devices theory, electronics, electrical/ pneumatic/ hydraulic control system, digital principle, wafer fabrication processes, pump and vacuum system and electrical wiring system
• Good Team Player
• Good Problem-Solving skills
• Able to perform 12-hour rotating shift

• Must have experience in data center deployments, building large-scale infrastructure.
• Knowledge of network routing and switching concepts and protocols including BGP, TCP/IP, VLAN, ISIS, OSPF, and MPLS
• Comfortable accomplishing basic tasks from Linux/Unix command line interface
• Demonstrated ability to analyze complex situations and utilize troubleshooting skills, systems and tools, and creative problem-solving abilities under pressure.
• Experience with Service Provider network hardware platforms and architectures including routers/switches and data center switching platforms is preferred (Good to have)
• Experience with field-based work in data centers

Job Description:

• Assist HOD and supervise a team of technicians in delivering technical advices/ support to the various business units
• Actively involved in job estimation and WIP (Work-In-Progress) tracking
• Work with engineering support section on product design, tester design, maintenance service and implement hardware and software components to integrate into in-service systems
• Manage and supervise the Maintenance, Repair & Overhaul (MRO) tasks allocated to the section in supporting commercial products, company's proprietary and non-proprietary products
• Deliver allocated and ad-hoc tasks within stipulated timeline and cost
• Understand the concept of Reliability & Maintainability (R&M) tools such as FMEA so to achieve improvement in MRO effectiveness, reduced manpower requirements and minimized life cycle cost
• Conduct and lead failure investigations and prepare reports for problems or issues based on findings from facts, researches, studies and make necessary recommendations
• Submit investigation reports to relevant authority for approval
• Generate documents and engineering process plans to ensure operation requirements and safety standards are maintained
• Conduct technology search for MRO applications and introduce technology enablers to improve performance and quality of the repaired systems or components
• Participate in Customer meetings to gain insights to their needs and expectations, translating these requirements into deliverables where feasible
• Responsible for the training of technicians; planning, assigning, and directing work to a group of technicians; appraising, addressing complaints and resolving conflicts
• Perform other related duties as assigned

Job Requirements:

• Degree in Mechanical/ Mechatronic Engineering
• Experience in Component MRO in related industries
• Experience in effectively leading a team of Technicians
• Experience in SAP System is advantageous
• Knowledge in Army systems will be an added advantage
• Ability to read and interpret schematics and datasheets
• Strong technical skills in troubleshooting Engine, Transmission or Gearboxes
• Competent in Mechanical/Mechatronic system
• Familiar with components testing
• Ability to read and interpret Engineering Drawing and datasheets
• Good communication skills and a strong team player
• Able to work under pressure and tight timeline
• Good analytical and problem-solving skill
• Able to read Manual and Engineering Drawing for any re-engineering work required

Meta is seeking experienced Front End Software Engineers to join our product teams. As a member of our team, you will play a vital role in crafting user experience that are both delightful and effective, helping to scale the company and enhance employee productivity. You'll have the opportunity to work on projects that transform the way Meta employees collaborate, streamline business processes, and develop world-class business software.

Our product teams are responsible for building and maintaining a wide range of internal tools and applications that help Meta employees do their jobs more efficiently and effectively. From project management and collaboration tools to data analytics and visualization platforms, we're constantly pushing the boundaries of what's possible with technology.

As a Front End Software Engineer at Meta, you'll be responsible for designing and implementing intuitive and user-friendly interfaces that make it easy for employees to access the information and tools they need to do their jobs. You'll work closely with our product managers, designers, and back-end engineers to ensure that our products are not only visually appealing but also highly functional and scalable.

If you're passionate about building software that makes a real difference in people's lives, we'd love to hear from you. Join us and be a part of a dynamic and innovative team that's shaping the future of how people connect and work together!

Responsibilities

• Build front-end frameworks that will allow other product teams to build faster and with higher quality
• Implement the features and user interfaces of enterprise products that are used by the entire company
• Identify and resolve performance and scalability issues
• Architect efficient and reusable front-end systems that drive complex web applications
• Collaborate with Product Designers, Product Managers, and Software Engineers to deliver compelling user-facing products

Minimum Qualifications

• 2+ years of experience in web technologies including HTML, CSS, and JavaScript Experience in web technologies: HTML and CSS
• Experience in writing reusable and high-performance user interface components
• Object Oriented JavaScript Frameworks experience
• Experience in architectural design for complex front-end systems
• Experience building maintainable and testable code bases, including API design and unit testing techniques
• Experience in performance debugging and benchmarking
• Experience building web applications
• Currently has, or is in the process of obtaining a Bachelor's degree in Computer Science, Computer Engineering, relevant technical field, or equivalent practical experience. Degree must be completed prior to joining Meta.
• Shipped at least one large-scale product to production, supporting millions of active users

Preferred Qualifications

• Experience with React

Meta builds technologies that help people connect, find communities, and grow businesses. When Facebook launched in 2004, it changed the way people connect. Apps like Messenger, Instagram and WhatsApp further empowered billions around the world. Now, Meta is moving beyond 2D screens toward immersive experiences like augmented and virtual reality to help build the next evolution in social technology. People who choose to build their careers by building with us at Meta help shape a future that will take us beyond what digital connection makes possible today—beyond the constraints of screens, the limits of distance, and even the rules of physics.

About Bruker:

Bruker is enabling scientists to make breakthrough discoveries and develop new applications that improve the quality of human life. Bruker’s high performance scientific instruments and high value analytical and diagnostic solutions enable scientists to explore life and materials at molecular, cellular, and microscopic levels. In close cooperation with our customers, Bruker is enabling innovation, improved productivity, and customer success in life science molecular and cell biology research, in applied and pharma applications, in microscopy and nanoanalysis, as well as in industrial applications. Today, worldwide more than 8500 employees are working on this permanent challenge at over 90 locations.

Today, worldwide more than 9700 employees are working on this permanent challenge at over 90 locations on all continents. Bruker continues to build upon its extensive range of products and solutions, its broad base of installed systems and a strong reputation among its customers. Being one of the world's leading analytical instrumentation companies, Bruker is strongly committed to further fully meet its customers’ needs as well as to continue to develop state-of-the-art technologies and innovative solutions for today's analytical questions.

Bruker - Innovation with Integrity.

Please visit www.bruker.com.

Bruker Singapore is seeking for a Field Service Engineer within the service organization. He/She is an ambassador of Bruker Nano Surfaces Metrology (BNSM) instrumentation and technology. Bruker Nano Surfaces Metrology manufactures the world's leading Atomic Forces Microscopes, Stylus profilers, Mechanical Testers, X-Ray Diffractometer and non-contact 3D optical microscope instrumentation. This technical role responsible for customer direct post-sale instrumentation and application support including: installation, user and application training, instrument diagnostics/fix, and post-sale applications support. Individual must be customer focused with a strong technical background enabling our customers to maintain their instrument at peak performance and maximize productivity for their intended use case.

SUMMARY OF RESPONSIBILITIES:

• Performs site surveys, pre-installation, installation of Bruker Semiconductor Metrology Tools (AAFM(NanoMet), AFMi, TSOM & X-ray) for customers both domestic and international
• Provide high level technical support to external customers at their location
• Provide on-­site training to the customers
• Interface with cross functional work teams such as field applications, customer support/services, product management, manufacturing and marketing/sales
• Develop Service technical documentation
• Create, develop, and continuously improve the customer support & applications knowledge database
• Timely and professionally handle field service calls and issues arising from the field service
• Performs basic applications support of Bruker Semiconductor Metrology Tools for customers both domestic and international
• Visits, triage with field applications scientists as appropriate
• Timely complete and submit all required paperwork
• Flexible schedule to accommodate our customer’s needs
• Effectively handle multiple priorities, organize workload, and meet deadlines
• Communicate with the customer to ensure satisfaction and implement any necessary corrective actions
• Up to 30% traveling required within Southeast Asia (at times with short notice)
• Misc. other duties commensurate with the capabilities of a Field Service Engineer

ESSENTIAL FUNCTIONS:

• 90% Technical support (Diagnostics/troubleshooting/on-site/phone/e-mail/web-ex/SAP RMAs, etc.)
• 10% Knowledge database development, delivery of training, basic application support and Escalation support (technical analysis, cross-functional engagement, plan of action, on-site support, etc…)

ADDITIONAL RESPONSIBILITIES:

• Pre-sales support
• Other duties as assigned

EDUCATIONAL/EXPERIENCE REQUIREMENTS:

• Bachelor’s degree or equivalent technical qualifications in electrical/ mechanical engineering or physical sciences. Masters or higher-level education is preferred. Metrology experience within Semiconductor Market an advantage.
• Working knowledge of MS Office, Excel. Working knowledge and ability to test and troubleshoot mechanical, electrical analog and factory Automation
• Up to 5 years of relevant Semiconductor industry experience, preferably metrology products and with hands on instrument experiences.
• AAFM, AFM and X-ray service experience or background in Technical Support preferred.

Interested candidates, please apply via Bruker's career portal directly : https://bit.ly/48OlAj5

Software Engineer (Full Stack)

We develop and deliver innovative products and services that save and improve lives.

We are hiring a Software Engineer for application development projects. You will write clean and readable code and deliver features with and without supervision. You will understand and contribute to application architecture and will have knowledge of various design patters. You will have knowledge of software testing practices. You will have the opportunity to learn about the healthcare industry and grow your technical and person skills.

Your responsibilities will include:

• Write and review code
• Understand relevant business domain and analyze application requirements
• Take part in overall application architecture and design
• Design and develop integrations with other applications
• Create unit tests

Qualifications:

• Minimum 2 years of software development skills – good full stack JavaScript/TypeScript, React, HTML, CSS, REST API, HTTP, SQL and databases, nice to have other experience with another programming language (Python, PowerApps, Java)
• Ability to learn fast and tackle loosely defined problems
• Familiarity with modern product development practices (agile, scrum, test driven development, UX, design thinking)
• Familiarity with cloud computing and AWS
• Familiarity with DevOps practices (git, infrastructure as code, continuous integration & continuous delivery, observability)