• Responsible for leading the planning and design of Mechanical engineering works for building services and infrastructure works.
• Review reports, specifications, calculations, drawings, and other documents prepared for the different stages of a project.
• Supervise the installation, testing, and commissioning of Mechanical engineering works.
• Work together with other disciplines in feasibility studies and design, as well as to ensure excellent service delivery to Clients.
• Correspond with project experience acquired and individual competency in technical knowledge/skills, project management, and contract administration.

Job Requirements:

• Degree in Mechanical Engineering recognized by the Professional Engineers Board, Singapore
• Registered with the Professional Engineers Board, Singapore.
• Minimum 3 years of relevant experience in Mechanical engineering design for building services and infrastructure works. Those with more than 5 years of relevant experience may considered for a Senior role.
• Good working experience in a consulting firm with a proven track record in major development projects.
• Conversant with local codes and regulations, and authority submission procedures.
• Strong planning, organizational, and supervisory skills.
• Knowledge of AutoCAD and/or Autodesk Revit is advantageous

About VSMC

VisionPower Semiconductor Manufacturing Company Pte Ltd (VSMC) is a new joint-venture 300mm semiconductor wafer manufacturing facility to be built in Singapore. We are looking for committed, resilient and passionate talents to launch a promising future that power the next generation devices and systems. If you share the same passion to pursue excellence, join us to make an impact and be part of something special!

Role Summary

You will be responsible for successful customers’ product full lifecycle, including but not limited to, technology transfers, new products introduction, device performance, yield, and reliability of our advanced technologies

Key Responsibilities

• Take charge for successful new products qualification and technology transfers from motherfab
• Complex data analysis to identify process design weaknesses and/or manufacturing tool issues.
• Design and execute experiments, analyse complex data sets and derive actionable insights to improve yield and performance for each specific technology and/or products
• Collaborate with the engineering teams to maintain process stability and provide technical solutions to customers

Education Qualification & Essential Experiences

• A bachelor’s degree or higher in Electrical and Electronics Engineering, Chemical Engineering, Materials Science, Physics, or a related STEM field
• Minimum of 4 years of experience in silicon process flow enhancements and managing process shifts, changes with design rules and product layout, ensuring optimal yield, electrical test and product performance with short-and long-term reliability implications considerations
• Must be available to travel to Taiwan for a training period lasting 6 to 9 months
• Fresh graduates welcome to apply

Key Skills and Attributes

• Good interpersonal and communication skills to work effectively across functions and geographical teams with diverse background
• Strong analytical and problem-solving skills to achieve positive results and outcome
• Goal driven and an excellent team player that can work under pressure in a dynamic and fast-paced environment
• Has a growth mindset, prioritizing adaptability, resilience, innovation, and ongoing learning to support business needs

VSMC promotes diversity and inclusivity in our workforce; and hiring will be conducted in phases

Requirement

• Diploma/Degree in Information Technology/Computer Science or any related study
• At least 3 years of relevant experience
• Skills on SDLC, CI/CD, Agile

Responsibilities

• Develop, maintain and administer tools which will automate operational activities and improve engineering productivity
• Identify industry best practices/solutions and pursue continuous improvement opportunities in SDLC / SDLC2 (Software Development Life Cycle) processes and practices, relentlessly drive for standardization, automation and self-services.
• Develop reusable, scalable, and testable automation scripts and tools for routine and repetitive tasks.
• Drive alignment efforts between development and operations teams to better recognize benefits of automation and cloud.
• Ability to research, propose and prototype new principles, technologies, tools and concepts and integrated them into the teams collective knowledge.
• Developing CI/CD roadmap and implementing to the projects. Help on AGILE/SCRUM Methodologies while execution.
• Manage and builds EAPI with Unit testing, Code Coverage, Enhancements. Same promote to Production through Jenkins CI/CD Pipeline.

Interested applicants, Please send your updated resume in Word format to [email protected]

Please indicate Job Code 109 on email subject

We regret that only shortlisted candidates will be notified.

IT Consultancy & Services Pte Ltd

EA No: 92C5311 | EA Reg No. R1104129

Please visit www.itcspl.com to learn more information about ITC

Responsibilities:

• Oversee the construction activities and progress, plan, implement, and monitor work
• Schedule following the master and detailed work program
• Liaise with a Professional Engineer on the Temporary works
• Liaise with consultants (QPS) for technical issues and coordinate the site activities with subcontractors
• Handle technical and engineering problems
• Guide supervisors about construction works, ensure progress according to schedule,
• Maintain quality standards, carry out site inspections and resolve technical issues on time
• Prepare report and method statement whenever necessary
• Manage and control workers and monitor their work closely to keep the site safer and neat
• Supervise ongoing site activities closely

Requirements:

• Diploma in Civil Engineering or equivalent
• must have Lifting Engineer Certification for a Senior role
• Experienced in Singapore underground project, D/wall, and other structural works
• Minimum 2 years of relevant experience in LTA Project is preferred
• willing to work 6 days and/or 5.5 days per week

• To plan, coordinate and execute quality assurance and quality control of project.
• To ensure all products are executed in accordance to contract specifications.
• To liaise and coordinates with suppliers / sub-contractors to ensure quality control.
• Facilitate in monitoring material status updates and traceability records while maintaining scheduled workload.
• To conduct QC inspection and record on all the incoming materials.
• To record all inspection results in the appropriate inspection records.
• To highlight to superiors all non-conformities found during inspections.
• Facilitate on off-site inspection/ sampling / testing and submission of materials
• Maintains safe, secure, and healthy work environment and aiming for zero accident
• Making sure sites meet legal guidelines, and health and safety requirements
• To prepare all the Quality-related reports.
• Any other ad-hoc duties as and when assigned

• Support Project Manager in planning and execution.
• Coordinate construction tasks per schedules and standards.
• Prepare and submit project documents and reports.
• Liaise with clients, consultants, and subcontractors effectively.
• Supervise site work to ensure quality compliance.

Requirements:

• Minimum Dip/Deg in Electrical Electronics Engineering with at 4 years of relevant working experience.
• Proficient in basic programming software such as VB, C, C++, Java, C# etc is advantageous.

Interested candidates please send in your resume to:

Yvonne Suan Ying Zhen

CEI No: R24122857

Email: [email protected]

EA License No: 99C4599

*All information will be treated with strictest confidence. We regret that only short-listed applicants will be notified.

About VSMC

VisionPower Semiconductor Manufacturing Company Pte Ltd (VSMC) is a new joint-venture 300mm semiconductor wafer manufacturing facility to be built in Singapore. We are looking for committed, resilient and passionate talents to launch a promising future that power the next generation devices and systems. If you share the same passion to pursue excellence, join us to make an impact and be part of something special!

Role Summary

You are responsible for identifying, assessing and advising on risks arising from the workplace health, environmental and/or work processes, recommending measures to eliminate or minimize and control the risks and implementing the measures.

Key Responsibilities

• Conduct job and environment hazard and risk assessments, perform workplace evaluations, and implement corrective and preventive actions
• Apply relevant licenses, conduct tests and provide necessary inspection reports on environment and safety to drive improvement
• Lead and continually review existing and new Fab processes and equipment for EHS compliance, including managing waste, air, water, chemicals, gas and others
• Manage semiconductor process safety, establish Environment, Health and Safety (EHS) culture, implement and enhance the EHS program for employees and contractors
• Perform regular and ad-hoc inspections. audits and supervise hazardous operations safely
• Lead and facilitate ERC (Emergency Response Committee) related activities such as factory emergency response, fire, gas leak and others
• Collaborate with relevant departments for ISO14001, ISO45001, ISO14064, and ISO50001 management systems certification and compliance
• Provide technical, regulatory and process guidance to address emerging EHS issues

Education Qualification & Essential Experiences

• A bachelor’s degree or higher in Engineering or Science background including Occupational Safety, Chemical Engineering or Chemistry, environmental science and emergency response or management
• Minimum of 3 years of experience in semiconductor, electronics manufacturing, or other chemically intensive manufacturing industries and regulatory compliance preferred.
• Possess industrial safety, environmental protection, and fire protection related certificates
• Must be available to travel to Taiwan for a training period lasting 6 to 9 months

Key Skills and Attributes

• Strong analytical skills and able to work under pressure in a fast-paced environment
• Good interpersonal, leadership and communication skills to work effectively across functions and geographical teams with diverse background
• Goal driven and an excellent team player that can work under pressure in a dynamic and fast-paced environment
• Has a growth mindset, prioritizing adaptability, resilience, innovation, and ongoing learning to support business needs

VSMC promotes diversity and inclusivity in our workforce; and hiring will be conducted in phases

Location: Central area

Position Overview:
This role is ideal for individuals who are passionate about designing and implementing technology solutions while providing technical support for smooth operations. As an Infrastructure Engineer, you will contribute to infrastructure planning, project execution, and end-user support to ensure seamless technology integration and customer satisfaction.

Key Responsibilities:

• Assist senior engineers in planning and designing technology schematics and infrastructure solutions.
• Develop detailed bills of materials and provide proactive recommendations for technology enhancements.
• Take full accountability for assigned projects, overseeing the installation, field deployment, and implementation phases through to completion.
• Maintain up-to-date project schedules and cost sheets, ensuring timely reporting of progress to senior staff.
• Provide technical and desktop support for end-users, ensuring system reliability and resolving issues effectively.
• Collaborate with customers to understand requirements and communicate solutions, fostering positive relationships.

Preferred Skills and Qualifications:

• Strong knowledge of Windows operating systems, endpoint security, and basic networking configuration.
• Familiarity with helpdesk systems and processes.
• Excellent communication skills to manage end-user interactions and articulate technical solutions.
• Capable of planning delivery timelines and coordinating with stakeholders effectively.
• Detail-oriented, with the ability to manage multiple tasks and meet deadlines.

To Apply, kindly click on the "APPLY NOW" button

We regret that only shortlisted candidates will be notified.

Staffking Pte Ltd (20C0358) | Chong Kar Ming (John) (R21101412)

Job Overview:

We are seeking a skilled and motivated Electrical Engineer to join our Mechanical & Electrical (M&E) company. The ideal candidate will be responsible for designing, implementing, and overseeing electrical systems in various projects while ensuring safety, efficiency, and compliance with industry standards.

Key Responsibilities:

• Design and develop electrical systems and components for M&E projects.
• Prepare technical drawings, specifications, and reports for electrical installations.
• Conduct site inspections to ensure work complies with design plans, standards, and regulations.
• Collaborate with the project team, including mechanical engineers, contractors, and clients, to deliver seamless integration of M&E systems.
• Oversee and coordinate the installation, testing, and commissioning of electrical systems.
• Perform load calculations, energy audits, and system analyses to optimize performance.
• Identify and resolve technical issues during the project lifecycle.
• Ensure compliance with safety codes, electrical regulations, and quality standards.
• Prepare and manage budgets, schedules, and timelines for electrical works.
• Stay updated on advancements in electrical engineering and M&E technologies.

Requirements:

Education:

• Bachelor’s degree in Electrical Engineering or a related field.

Experience:

• Minimum of 5 years of experience in electrical engineering, preferably in the M&E industry.
• PLC and HMI programming
• BMS

Technical Skills:

• Proficient in electrical design software (e.g., AutoCAD, ETAP, Revit).
• Strong knowledge of electrical codes, standards (e.g., NEC, IEC), and local regulations.
• Experience in PLC, VFD,BMS

Soft Skills:

• Strong problem-solving and analytical abilities.
• Excellent communication and teamwork skills.
• Ability to work independently and manage multiple tasks effectively.

What We Offer:

• Competitive salary and benefits.
• Opportunities for professional development and certifications.
• Exposure to challenging projects in a dynamic industry.

How to Apply:

Interested candidates are encouraged to submit CV and a cover letter to [email protected] with the subject line: "Application for Electrical Engineer – [Your Name].

Job Description

The candidate will be responsible for designing and drafting the electrical and instrumentals systems of Ships and Offshore Platform independently. The candidate will interact with Clients, Classification and Statutory bodies and Vendors in the process of design. Candidate to be able to prepare the following drawings independently:

• Electrical Load
• Single Line Diagram
• Short-Circuit Calculation
• Lighting Arrangement
• Transformer Load Analysis
• Cable Estimation

Desired Profile

• Min 5 years’ experience of which at least 3 years should be in Marine Design.
• He/She should be conversant with Ship electrical system and classification rules and IEE.
• Skills in Excel, Electrical design software and CAD-tools is required.

Requirements

• Degree in Electrical Engineering
• Excellent Communication Skills
• Conversant in Design of Electrical and Hybrid Propulsion systems, including batteries, battery charging systems etc.

• Responsible for all major mechanical and electrical and instrumentation equipment
• Lead a team of technical executives/technicians for troubleshooting works
• Manage the purchase of major supply and repair items alongside with supervision and execution of preventive and condition monitoring of major electrical equipment
• Handle hands-on preventive maintenance and breakdown maintenance work
• Coordination with clients and subcontractors to meet the site/project requirements
• Carry out rectification of faults within a specified time
• In-charge of troubleshooting of M&E system
• Responsible for planning, execution and supervision of all facilities management and operational activities
• Responsible for project cost control and service standards
• Any other ad hoc duties assigned

Job Requirements

• Degree or Diploma in Engineering.
• 3-5 years of relevant working experience
• Technical knowledge of M&E systems(including, but not limited to, fire protection systems, AV systems and ACMV systems) is an added advantage
• Able to perform shift work if required
• Preventive Maintenance Troubleshooting

Responsibilities

• Undertake detailed design in Building Structures
• Execution of projects and liaison with the Client, Client’s Consultants, Contractors, and authorities to provide technical support for design
• Checker to obtain approval of design and drawings
• Prepare design report & attend meeting to resolve technical issue

Requirements

• Degree in Civil and Structural Engineering or its equivalent that is recognized by the Professional Engineers Board of Singapore
• Well versed with local authority codes and regulations
• Minimum 4 years of relevant building structure with civil experience
• Involve in large scale building (HDB/ Condominium/ Commercial) structural design project
• Good exposure in the analysis and design of PPVC, Precast and concrete structures, steel structures
• Good knowledge of the various engineering design software and analytical tools
• Applicant who has lesser experience will consider for Engineer role

- Propose alternative design to substitute tender design that is practical, liable, cost-saving and conforms to relevant building code of practice.

- Liaise with client, architect, consultant, and main contractor for any site issues to ensure timely project execution. To represent the Company at site meetings and other meetings as required.

- Responsible for site coordination workers and to make accurate, decisive, and prompt decisions relating to work matters. Feedback to management on site problems for corrective actions to be taken.

- To ensure details in subcontracts, purchase orders are accurate and meet with the project specifications in covering the full scope of work intended and required by the main contract.

- Efficient project management which includes project scheduling, lead, and co-ordinate the whole project team which include supervisors, foreman, workers and subcontractors.

- Source for more competitive costs in equipment and subcontractor costs to minimize project cost and capital utilization.

- Responsible for preparation, checking and submission of shop drawings before commencement of installation works and as-built drawings upon completion. The drawings shall provide for the openings through building structures for the passage of M & E services and shall ensure conformance to regulation and clients’ requirements.

- Submission of monthly progress claim to clients and monitoring of variation works, avoid wide differential in claim and payment amounts. To finalize project accounts and variation claims early for client’s verification and payment.

- To monitor the progress of work on site and recommend, if appropriate, the interim payment certification to supplier/subcontractors proposed by the designated Project Engineer.

- To access, recommend and recruit suitable subcontractors and work force to provide quality engineering services to our clients.

- To be readily involved in tender estimation, variation quotation and costing preparation and assist the project manager in the preparation of budgetary statement.

- Responsible for all correspondences with the clients, authorities, main-contractors, subcontractors, vendors, architects, consultants, etc.

- To be actively involved with quality management system of the company.

- Perform any other duties as assigned by higher management or superior.

Job Requirements:

- Degree or Diploma holder in Mechanical Engineering or equivalent.

- Have more than 3 years or dible experiences in ACMV system.

- Proficient in Microsoft Office, AutoCAD and BIM.

- Independent, diligent, highly motivated with excellent team spirit and cope in a fast-paced environment.

- Strong analytical and problem-solving skills, with the ability to identify and resolve complex issues.

We regret that only the shortlisted candidates will be notified

Primary Responsibilities:

• Identify and solve engineering problems as needed
• Support manufacturing/assembly process improvement
• Responsible to uphold electrical safety standards and ensure regulatory compliance

Job Descriptions:

• Prepare and update process check sheets and manuals
• Troubleshoot technical issues and optimize system performance as needed
• Provide technical guidance and mentor Technicians
• Conduct and prepare root analysis and part defect report
• Work with Internal parties and vendor to prevent recurrence
• Liaise with R&D department for engineering change request
• Pre-inspection/inspection on MTC’s Quality Issues
• Prepare electrical inspection test sheet for test and measurement
• Evaluate and implement corrective measure on test result
• Ensure adherence to design specifications, quality standards, and safety protocols
• To carry out or perform tasks / activities, prepare and submit necessary reports to Superior from time to time

Job Requirements:

• Diploma in Electrical Engineering or equivalent
• Good interpersonal and communication skills

Job Description:

• Lead metal Additive Manufacturing process, materials and application development and service projects, including material selection, part design, parameterization, prototyping and manufacturing of AM parts
• Scoping, managing, and executing of customer projects within budget and schedule, ensure deliverables, objectives and customer requirements are met
• Provide technical consultation and support to customer enquiries relating to metal AM application
• Operation of metal AM machines and auxiliary equipment, including maintenance, troubleshooting, risk assessment, and managing of AM lab
• Documentation of project reports, engineering reports, technical data, process know-hows; development of SOPs and best practices for AM equipment and processes
• Support market promotion and customer engagement; participate in local or overseas industry exhibitions, tradeshows, conferences, and seminars; facilitate lab tours, demos and presentations
• Provide technical content to support creation of marketing collaterals such as demo parts, product videos, whitepaper, etc.

Responsibilities:

• To achieve R&D development goals in order to fulfill business needs and support company’s growth.
• Proactively provide engineering support and solutions to relevant department such as manufacturing, customer service, sales, application
• Adhere strictly to job process defined by Makino's QEHS policy Engineering to achieve and comply to Makino quality standard
• Contribute to improve Makino technical core competency through continuous learning and innovation
• Share knowledge with relevant people to help create a knowledge bank and learning organization
• Independently and proactively develop and validate new unique engineering designs
• Mentor and guide junior Engineers/Technical Officers
• New hire is required to undergo specific tests for who are exposed to certain occupational hazards.

Requirements:

• Bachelor's Degree / Master / PHD in Engineering, Mechanical, Materials, Aerospace or equivalent
• Min 5 years of working experience with metal Additive Manufacturing process and application development
• Hands-on experience with LMD/DED machine operation
• Proficient in data preparation, CAD/CAM and toolpath generation for LMD/DED process
• Strong understanding of LMD/DED process, materials, and key process variables
• Experience with parameters development, material characterization, or process simulation
• Familiar with metal AM process chain
• Keen on hands-on work
• Fast learner and agile, able to adapt to dynamic work environment
• Able to work independently and self-motivated

Job Description

1. Perform site planning, coordination & inspection relating to the construction project so as to ensure that project completion timeline, requirements and budget are met.

2. Support Quantity Surveyors in conducting site measurement and inspections.

3. Able to plan / coordinate site works and resolve drawing details and discrepancies.

4. Any other tasks assigned by the management.

Requirement

1. Candidate must possess at least a Bachelor's Degree, Post Graduate Diploma, Professional Degree, Engineering (Civil/Structural) or equivalent.

2. Minimum 5 years construction experience with experience in civil construction industry.

3. Be able to work independently with minimum guidance and able to work within tight deadlines.

4. Bilingual in English and Mandarin is preferable

Interested applicants, please remember to include the following details for us to conduct a more effective job-matching for you:

1. Work experiences and job responsibilities

2. Current and Expected salary

3. Reason for leaving

4. Date of availability

5. Education background

6. Recent photo

Job Duties:

• Design civil and structural elements such as drainage, retaining walls, earthworks, slope formation, sewer etc
• Prepare and compile design and calculations for authorities submission
• Prepare Autocad drawings
• Hybrid work from home and office when required

Requirements:

• Proficient with design software such as Staad, Plaxis, Prokon
• Proficient with Autocad
• Minimum 5 years experience
• Bachelor degree from PEB Accredited University
• Candidates with either structural or civil design experience may apply
• BIM Knowledge will be advantage

• Candidate must possess at least Bachelor's Degree/Post Graduate Diploma in Engineering (Civil), mechanical & electrical or equivalent.
• At least 3 Year(s) of working experience in the related field is required for this position.
• Required Skill(s): MS OFFICE, DRAWING INTERPRETATION
• Specialized in Engineering - Civil Construction/Structural/Mechanical/Electrical or equivalent.
• Plan, coordinate, supervise and manage the civil and structural or M&E projects.
• Coordinate and attend meetings with clients, consultants and sub contractors.
• To ensure and maintain high standard of work, safety and good work productivity.
• Other adhoc duties as and when directed

• Candidate must possess at least Bachelor's Degree/Post Graduate Diploma in Civil Engineering or equivalent.
• At least 3 Year(s) of working experience in the related field is required for this position.
• Required Skill(s): MS OFFICE, DRAWING INTERPRETATION
• Specialized in Engineering - Civil/Structural or equivalent.
• Plan, coordinate, supervise and manage the civil and structural works
• Coordinate and attend meetings with clients, consultants and sub contractors.
• To ensure and maintain high standard of work, safety and good work productivity.
• Other adhoc duties as and when directed

Roles & Responsibilities

Job Description:

• Handle project planning, scheduling, monitoring and updating to meet project completion targets
• Perform site planning, coordination and inspection relating to the construction project so as to ensure that project completion timeline, requirements and budget are met
• Liaise with the BIM team to update the drawings or BIM Model with the latest information available timely
• Prepare as-built drawings or BIM Model and compile O&M Manual for submission
• To assist in project coordination and oversee of all Civil and Structural works on site and ensure all related activities are carried out as per drawings
• Review architectural & structural submission documents & submission drawings prior relevant authorities' submission
• Assist the Project team in site walk-down survey with other discipline engineers and Client representatives as required, in resolving technical issues until construction completion
• Liaise with internal and external parties for project management
• Any ad-hoc duties as assigned

Job Requirements:

• Minimum of 2 years’ experience
• Recognized Degree in Civil Engineering, Project Management, Structural Engineering or equivalent approved by PEB, BOA or SISV
• Good knowledge of technical design and engineering, construction methodology and construction planning
• Good oral, written and inter-personal communications skills in dealing with individuals and groups at all levels
• Proficient in Microsoft Office, AutoCAD and knowledge of BIM
• Independent, diligent, highly motivated with excellent team spirit and cope in a fast-paced environment
• Obtain CONQUAS supervisor certificate will be added advantage

Job Description

• Monitor and review master construction program and preparation of catch-up program, if applicable.
• Monitor and supervise Engineers / foremen, ensure compliance to the quality procedures & standard of workmanship. Checking on quality and quantity of work by subcontractors.
• Preparation of detailed program for the site team to follow accordingly & completed in time.
• Resolve drawing discrepancies & technical difficulties with Technical team.
• Preparation of detailed method statements and work instructions for construction.
• Coordinates between sub-contractors/vendors/internal departments and monitor site manpower / material / equipment demands to meet schedules.
• Liaise with the Consultants on the submission related to structural works and Technical Department.
• Plan all works on site, including program schedules and construction methods, forecast equipment, material and manpower requirement, and control usage and wastages of all.
• Involve in tendering of projects, able to do measurement and cost estimation for tender & quotation.

Join the Team at McConnell Dowell Are you passionate about engineering and civil infrastructure? At McConnell Dowell, we deliver landmark projects that shape communities and drive progress.

We're seeking Project Engineers and Site Engineers to join our team in Singapore and contribute to our civil infrastructure works projects.

About the Role

As a Project Engineer or Site Engineer, you'll play a pivotal role in ensuring the successful execution of our projects. Your responsibilities will include:

• Overseeing engineering, planning, quality, cost control, and scheduling functions.
• Adhering to the McConnell Dowell Project Execution Plan and safety/environmental responsibilities.
• Assisting senior engineers and the construction manager in daily site activities.
• Monitoring and reporting on site progress, including direct employee and subcontractor works.
• Developing procedures for construction activities and ensuring compliance with relevant legislation.
• Representing McConnell Dowell professionally in interactions with clients and stakeholders.
• Promoting McConnell Dowell’s core values and fostering a strong safety culture.

What We’re Looking For

To excel in this role, you should have:

• A degree in Civil or Structural Engineering. 3 to 5 years of relevant on-site civil construction experience.
• Preferably, local experience and knowledge of civil infrastructure projects in Singapore.
• Strong interpersonal and communication skills.
• The ability to work on an alternate 6-day workweek schedule.

Why Join McConnell Dowell? Be part of a dynamic team working on major civil infrastructure projects. Gain valuable experience with a globally recognized infrastructure company. Contribute to innovative and impactful engineering solutions.

How to Apply If you're ready to take your engineering career to the next level, we want to hear from you! Submit your application today and join McConnell Dowell in building a better future.

Job Scope

• Prepare schematic design, site installation layout, calculations, technical reports and specifications etc for automation equipment panel.
• Liaise with external consultant teams, contractors and suppliers to resolve project electrical design issues.
• Generate BOM and RFQ document.
• Communicate with contractor for automation equipment panel fabrication.
• Prepare factory acceptance test document for automation equipment panel.
• Responsible for liaising with Project Manager on automation equipment panel acceptance before ship to site.
• Provide support on site installation.
• Updating of Circuit diagram, Control device and Equipment Installation layout.

Please submit your updated resume by using the APPLY NOW BUTTON

By submitting your personal data and/or resume to us in connection with your job application, you will be deemed to have agreed and consented to us in collecting, using, retaining, and disclosing your personal data and/or resume to prospective employers for the purpose of the evaluating, processing and administration by company relating to this job application.

*We regret to inform that only shortlisted candidates would be notified*

We wish you all the best in your career search.

You are welcome to visit our website at http://www.rkgroup.sg/

RK Recruitment Pte Ltd | EA License No.: 20C0280

RAYMOND NG JUN HAN | EA Personnel No.: R1657009

Location: Tampines

I- Basic Function/General Scope of Work

The position takes overall responsibility of project management for all aspects (contract, commercial and technical) of the projects assigned. The position works closely with Project Manager so as to complete and achieve the projects’ objectives/ metrics as planned.

II- Key Duties & Responsibilities

1. Conducts site inspection, collects the data and transfers the information to design team to prepare drawings.

2. Verifies all drawings from design team prior to moving to construction phase.

3. Deals with customer requires related to drawings and requirements.

4. Coordinates with design team, customers and sub contractors during construction.

5. Checks and inspects the quality of work carried out by workers of subcontractors.

6. Assists and follows the assignments of project manager in ensuring that the projects are implemented on time, safety and in accordance with the customer requirements

7. Be responsible for testing and commissioning all equipment with subcontractors after installation.

8. Be responsible for customer training after project completed.

9. Be responsible for final inspection and collection the data for as built drawings.

10. The position is accountable for implementing assigned responsibilities and activities to attain project goals and objectives.

11. The position is accountable for strictly complying with Chubb’s Code of Ethics.

12. The position is accountable for implementing assigned responsibilities and activities to attain EH&S goals and objectives and complying with EH&S policies, applicable rules, procedures, and regulations.

III- Qualifications & Compentencies

The incumbent should possess:-

1- a degree in Engineering is required/preferred.

2- a minimum 3 years of Project Management knowledge, skills, experience.

3- Knowledge and experience in any kind of engineering management, problem solving, strong systematic and analytical thinking skills, strong knowledge of commercial terms and conditions, working within an ISO 9000 quality environment, strong coaching, influential and negotiation skills.

4- Good English communications and computer competencies.

5- Adaptability, Analytical Thinking, Teamwork, Communications, Listening and Ethics.

6- Experience in LTA projects is preferred.

Compensation & Benefits

• Annual Increment
• Performance Incentive Bonus
• Career Progression

For quick reply, please contact me at +65 85878287

Registration Number: R21100938

EA Licence No: 22C1301 (Unisearch Services Pte Ltd)

LOAD AND OPERATE HIGH-SPEED BLENDERS AND EQUIPMENT, PACKAGE MATERIAL FOR SHIPMENTS, INCLUDING WEIGHT AND QUANTITIES. ABLE TO UNDERSTAND AND REGARDING PLANT SAFETY AND OPERATIONS. FOLLOW BOTH VERBAL AND VISUAL INSTRUCTIONS. MAINTAIN GOOD HOUSEKEEPING. TRAIN OTHER OPERATORS WHEN ASSIGNED TO DO SO AND MAY BE REQUIRED TO RELIEVE OTHER OPERATIONS.