· Lead in the preparation of detailed design reports, calculations and drawings.

· Prepare submissions to statutory agencies/ authorities.

· Lead in the coordination with other disciplines in preparation of design deliveries.

· Lead in preparing tender documentations.

· Participate in the tendering of projects.

· Participate in the successful delivery of projects.

· Training and mentoring juniors.

· Design management, coordination and project control on major projects.

· Perform any other duties as assigned.

Requirements:

· Degree in Civil or Structural Engineering from a recognized University and eligible for registration with the Professional Engineers Board (Singapore).

· A minimum of 5 years of design experience.

· Conversant with local codes and authority submission procedures

· Excellent interpersonal, good written and verbal communication skills

· Have good knowledge of common structural design software.

· Working experience in engineering design consulting practice on building, geotechnical, infrastructure, rail or road projects (underground/basement/elevated structures, tunnel structures and MRT station structures)

· Good project management skills and strong analytical skills

· Able to work under pressure with good time management skill

If you wish to have the opportunity to work in an international consultancy firm that offers attractive remuneration, a 5-day work week and a conducive environment to enhance your skills and experience, please send your full resume, including your salary expectations and contact number to

2 International Business Park, #06-08

The Strategy, Tower 1, Singapore 609930

Email: [email protected]

(Only shortlisted candidates will be notified)

· Lead in the preparation of detailed design reports, calculations and drawings.

· Prepare submissions to statutory agencies/ authorities.

· Lead in the coordination with other disciplines in preparation of design deliveries.

· Lead in preparing tender documentations.

· Participate in the tendering of projects.

· Participate in the successful delivery of projects.

· Training and mentoring juniors.

· Design management, coordination and project control on major projects.

· Perform any other duties as assigned.

Requirements:

· Degree in Civil or Structural Engineering from a recognized University and eligible for registration with the Professional Engineers Board (Singapore).

· A minimum of 5 years of design experience.

· Conversant with local codes and authority submission procedures

· Excellent interpersonal, good written and verbal communication skills

· Have good knowledge of common structural design software.

· Working experience in engineering design consulting practice on building, geotechnical, infrastructure, rail or road projects (underground/basement/elevated structures, tunnel structures and MRT station structures)

· Good project management skills and strong analytical skills

· Able to work under pressure with good time management skill

Geotechnical:

- Experienced in the design and design management of major earth retaining and stabilizing structures, deep foundations, reclamations, ground improvements, slope stabilities.

- Familiar with the preparation of Geotechnical Interpretative Reports.

- Familiar with the geotechnical impact assessment of structures and instrumentations.

- Familiar with the application of geotechnical FEM software.

If you wish to have the opportunity to work in an international consultancy firm that offers attractive remuneration, a 5-day work week and a conducive environment to enhance your skills and experience, please send your full resume, including your salary expectations and contact number to

2 International Business Park, #06-08

The Strategy, Tower 1, Singapore 609930

You will be part of an innovative and passionate team, working towards the one ultimate goal of producing high quality software. Your primary duties are design, prepare technical specifications, lead a team of developers, programming, unit-testing, and analytical problem-solving; but may include support for products implementation, integration testing and documentation.

The individual will:

• Responsible for the successful enhancement of software products and solutions by co-operating with other teams to ensure releases that are coordinated in terms of both time and technology.
• Design system architecture; translate user's requirements into functional and technical specifications.
• Participate and manage testing, debugging, verifying design and conduct reviews.· Participate and manage data and solution migration.
• Assist pre-sale in architect technical solution.
• To perform other duties as and when required.

Job Requirements

1. Good knowledge of Java, J2EE, Hibernate, Spring framework, Spring Boot, JSP, Oracle, Postgres, Struts and Restful Services, Spring Security, LDAP, XSLT,etc.

2. Experience on SOAP Service, JavaScript & jQuery will be an added advantage.

3. Experience in programming mobile application is added advantage

4. Experience with a responsive design for desktop/mobile.

5. Should have worked on 2-3 major projects.

6. Working experience with code versioning tools such as Git and SVN.

7. Effective communication skills in English.

8. Working in cross-functional teams and leading offshore outsourced development and support, Solution architecture consulting

9. 6+ years working experience as IT professional, with proven experience in solution architecture.

10. Wide knowledge and hands on experience in Open-Source Technologies

Job Description:

• Infrastructure works like roads, drains, sewer works and ancillary works;

• Rectification of infrastructure works such as roads, drains, sewers and ancillary works for handing over to authorities;

• Provision of amenities such as footpaths/pavements, Personal Mobility Device (PMD) tracks, cycling paths, sheltered linkways, decking, etc;

• Construction of surface parking for cars, buses, heavy vehicles;

• Road traffic and junction improvements such as installation of road signage, lane markings;

• Construction of bus stops, bus bays, pedestrian overhead bridges and associated works;

• Earthworks and disposal of debris, removal of stockpiles and other unusable material;

• Slope protection and rectification, Trial trench works;

• Minor land clearances and clearing of overgrown vegetation;

• Instrumentation & Monitoring

Job Requirements:

• Degree in Civil & Structural Engineering from a University recognized by the Professional Engineers Board (PEB) and/or accreditation recognized by the Professional Engineers Board.

• At least 5 years of practical experience in the management of building (e.g. new building, R&R and A&A projects) or infrastructure (e.g. road, drain, sewers, services diversion) projects with contract value of $5 million and above.

• The PM must be familiar with PSSCOC.

• At least 2 years of relevant working experience or involvement in Integrated Digital Delivery (IDD) for project delivery and built environment industry.

• Strong, mature and proven ability to organize, manage and motivate a project team.

Kurita Singapore is a leading Japanese water treatment company dedicated to providing innovative solutions and exceptional service. We are seeking an experienced IT Infrastructure Specialist to collaborate with various departments, subsidiaries, HQ, and clients on application development and cybersecurity initiatives.

Job Summary: The IT Infrastructure Specialist will be responsible for designing, implementing, and maintaining the organization’s IT infrastructure. This role focuses on ensuring robust application support and cybersecurity measures, requiring strong technical expertise and the ability to work effectively across teams.

Key Responsibilities:

• Liaise with IT experience for corporate & subsidiaries regarding designing and deploying hardware and software systems that support the organization’s requirements
• Monitoring and maintaining IT infrastructure systems to ensure they remain operational and secure
• Developing disaster recovery plans and procedures in conjunction with other IT professionals (CSIRT) for corporate & subsidiaries.
• Troubleshooting and resolving technical problems as they arise, either independently or in collaboration with other IT professionals
• Keeping abreast of technological advancements and emerging trends in hardware, software, security and systems management

Qualifications:

• Bachelor’s degree in Computer Engineering or a related field.
• Minimum of 15 years of relevant experience in IT infrastructure management.
• Strong knowledge of networking protocols, server hardware, and operating systems
• Familiarity with security best practices and tools.
• Excellent problem-solving skills and attention to detail.
• Strong communication and interpersonal skills.
• Experience with Computer Security Incident Response Teams (CSIRT) is a priorieized.

Responsibilities

• Configure and manage infrastructure systems, applications, and network equipment (e.g., Active Directory, data centers, firewalls, VPN, video conferencing).
• Oversee desktops, mobile, and remote devices.
• Ensure automated backups, disaster recovery processes, and system patches, with close monitoring of resource usage.
• Work with external vendors to uphold SLAs.
• Develop and update technical documentation (admin and user guides).
• Support local and international users over LAN/WAN securely.
• Identify suitable products, solutions, and suppliers for project needs.
• Provide L1/L2 support and participate in projects as a lead or team member.

Requirements:

• Diploma/Degree in Computer Science, IT, or CCNA Certification.
• At least 1 year of relevant experience.
• Proficient in enterprise networking (WAN, LAN, VPN optimization).
• Skilled in Microsoft Server (2012+), Microsoft 365, Google Suite.
• Knowledgeable in internet architecture (TCP/IP, DNS, DHCP, Proxy, Firewall).
• Familiar with Alcatel PABX, FortiGate, Cisco, and Unifi Wireless AP Controller.
• Strong understanding of CyberRisk and CyberSecurity; PDPA familiarity preferred.
• Experience with Veeam, VMware, and UNIX/Linux is beneficial.
• Background in API/Web Programming and Database Administration is a plus.

______________________________________________________

HOW TO APPLY :

Interested candidates, please submit your resume by clicking on “Quick Apply” or contact [email protected] for more details.

Please provide following information in the resume for immediate processing

1) Reasons for leaving current and/or last employment

2) Last drawn and/or current salary

3) Expected salary

4) Date of availability and/or Notice Period

All applications will be treated in strictest confidence and only shortlisted candidates will be notified

Wee Wai Dan

EA License No : 03C5391

EA Reg No : R22109628

As part of this role, you will

• Provide technical consulting and product guidance to banks and partners integrating Wise, primarily post-sale

• Support business development by aiding larger partners requiring novel features

• Assist partners in the implementation phase, defining technical solutions and documenting requirements

• Participate in feature definition, prioritisation, and long-term strategy planning with the Wise Platform team

• Ensure partners deliver the best integration within their constraints for an excellent customer experience

• Collaborate with Implementation Managers, Product Managers, and Engineers, making product and project decisions

• Work on scaling Wise Platform into new regions, overcoming associated challenges

• Improve integration experience through documentation, APIs, SDKs, code samples, and reference implementations

• Collaborate with the technical presales team to support the sales cycle and secure new partnerships

• Enhance internal processes to handle multiple integrations in parallel

• Design and develop new features for Wise services and expose them on the public API when needed

• Troubleshoot, test, and resolve technical issues, supporting the API team with complex problems

This role will give you the opportunity to

• Choose your own path to success - you’ll have the freedom to define the vision and responsibility for making it happen.

• Identify problems and unlock opportunities for Wise and partners through technology solutions.

• Inspire other teams internally and externally with your ideas, knowledge and self-starter attitude.

• Travel to work with our teams in Tallinn and London as well as visit our partners in EMEA.

Job Responsbilities

• Prepare of tender activities
• Perform process design and costing (CAPEX & OPEX)
• Perform technical proposal c/w PFD, P &ID
• Tender clarification & presentation (supporting sales activities)
• Assisting project team on technical matters (process design & calculation and sequence of operation)
• Assist to source new product technical evaluation

Job Qualifications

• Degree in Chemical/Mechanical/ Electrical Engineering
• Technical knowledge (i.e. Process Design and calculation) in membrane (MF/UF/RO/MBR), Ion Exchange (2B3T, MB, CPU, EDI) and pretreatment processes (coagulation/ flocculation, sedimentation, clarification, filtration)
• Relevant project management / plant testing & comissioning experience will be an added advantage
• Self-starter, highly motivated, driven by excellence and having an eye for details

Your Job

As a Test Engineer, your primary purpose is to drive quality, yield, and productivity improvements. You will manage the new product release to manufacturing and address any problems affecting the smooth operation of parts. You are responsible for all testing activities related to the transfer of new testers from the design center to the manufacturing plant, including working with the design team to qualify new test systems and propose test limits. Your role also involves sourcing and assembling tester components locally, setting up, and debugging test software and hardware.

Our Team

You will be part of the Data-Com and Specialty Solutions Division, reporting to a Senior Engineer, Principal Engineer, or Department Manager. In this role, you'll collaborate closely with a variety of contacts, including assembly subcontractors, vendors, suppliers, QA Engineers, and Product Design Engineers. This teamwork ensures the seamless integration of innovative solutions and product designs in production processes.

What You Will Do

• Responsible for all testing activities related to new tester transfer from design center to manufacturing plant. Work with design team qualifying new test system, proposing test limit.
• Sourcing, assembling all tester components locally, set up and debugging test software and hardware.
• Tester maintenance for on-line/off-line High-Performance testers, Cirris, BERT, OCR, Robert, etc.
• Perform electrical testing, high speed tester support used in the manufacturing of High-Speed cable assemblies based on standards such as Ethernet, Infiniband, Fibre Channel, PCIe, SAS, SATA, etc.
• Integration of custom designed circuit boards and mechanical fixtures with off-the-shelf test equipment such as digital sampling oscilloscopes, TDR modules and network analyzers.
• Integrate software upgrades into high-speed test systems. Work closely with design centers on software improvement feedback to improvise the system for better solutions.
• Perform electrical testing of High-Speed cable assemblies, analyze test data using statistical modeling tools, identify critical to quality aspects of product design and manufacturing process, perform root cause / corrective action analysis, and provide reports to summarize findings.
• Work closely with multifunctional teams to upgrade globally deployable automated production test systems for cable assembly products. Maintain records for project execution, schedule, and budget. System design includes activities such as mechanical fixture design, PCB design, hardware integration, software development, system documentation, performance testing and characterization, etc.
• Create and execute test plans, conduct software reviews, perform system verification and validation, analyze, and resolve failure modes and document the results.
• Create product and test system documentation, specification, and work instructions
• Introduction of new solutions / technologies in the design of production processes.
• Adherence to procedures related to system management of quality, health, safety and environmental.
• Perform work in accordance with the standards of personal and professional integrity as described in the Code of Ethics and Business Conduct. To comply to PBM Guiding Principles for the job carry out under his responsibility.
• Perform other related duties as assigned by Management.

Who You Are (Basic Qualifications)

• Possess a degree or diploma in Mechanical, Manufacturing, Production Engineering, Systems, or Computer fields.
• Minimum of 2 years of experience with test equipment and measuring instruments.
• Proficient in compiled programming languages such as C/C++ or VB/C# within the Microsoft .NET framework.
• Skilled in using scripted programming languages like Python.
• Strong analytical ability to apply logical reasoning, test assumptions, observe results, and make corrections.

What Will Put You Ahead

• 2-5 years of progressive engineering experience with a robust understanding of high-speed testing and design.
• Extensive experience with RF/microwave test and measurement equipment such as digital sampling oscilloscopes, TDR modules, and network analyzers.
• Knowledge of RF/microwave transmission line theory, including s-parameters, Fourier transforms, and characteristic impedance.
• Experience with relational databases using software like Microsoft SQL or MySQL.
• Exposure to RF/microwave circuit design and PCB layout with tools like Mentor Graphics PADS or Cadence Allegro, and familiarity with advanced PCB fabrication methods.
• Training in Lean/Six Sigma methodologies with an understanding and application of tools such as control charts, process capability, and gage R&R.

At Koch companies, we are entrepreneurs. This means we openly challenge the status quo, find new ways to create value and get rewarded for our individual contributions. Any compensation range provided for a role is an estimate determined by available market data. The actual amount may be higher or lower than the range provided considering each candidate’s knowledge, skills, abilities, and geographic location. If you have questions, please speak to your recruiter about the flexibility and detail of our compensation philosophy.

Who We Are

As a Koch company, Molex is a leading supplier of connectors and interconnect components, driving innovation in electronics and supporting industries from automotive to health care and consumer to data communications. The thousands of innovators who work for Molex have made us a global electronics leader. Our experienced people, groundbreaking products and leading-edge technologies help us deliver a wider array of solutions to more markets than ever before.

At Koch, employees are empowered to do what they do best to make life better. Learn how our business philosophy helps employees unleash their potential while creating value for themselves and the company.

Additionally, everyone has individual work and personal needs. We seek to enable the best work environment that helps you and the business work together to produce superior results.

Responsibilities

• Lead the execution of the Instrument & Control ITP inspection and test in compliance with rules and Tai Power requirement.
• Ensuring that the deliverables from engineering, fabrication, and principal contractors are of the right quality, according to company and industry requirements
• Supporting engineering design review and provide feedback from basic design, details design up to shop drawings such as SCADA, CCTV, Helideck weather monitoring, ESD, telecommunication, F&G
• Interpreting, implementing, and documenting the overall control philosophy across the wind farm components
• Preparing Instrument & Control equipment technical spec and RFQ for supporting procurement team during quotation sourcing
• Participate in preparation and review of Inspection and Test Plan (ITP) of the wind farm offshore substations (OSS) and commissioning procedure.
• Involving in EC/MC completion test package preparation to ensure construction completion handed over as per sequence and schedule
• Perform a daily supervision of the installation and commissioning
• Attending daily call out inspection and work closely with shipyard construction team, QA and commissioning team
• Involving in wind farm OSS final acceptance test / Proof Concept test procedure preparation.
• Participate in Factory Acceptance Tests (FAT) for wind farm OSS equipment
• Involving in O&M procedure preparation and conducting OSS maintenance execution during operation.
• In association with the Maintenance Systems group, review and update the technical content of the preventive maintenance procedures and to recommend changes where improvements in safety, quality or economy may be effected
• Contributing to the continuous development of new technologies to improve the performance and usability of our wind farm control systems

Requirements

• Bachelor Degree in Electronics/Instrumentation/Communication Engineering
• Knowledge in SCADA, PLA or DCS control system
• Problem solver, attention to details,
• Ability to analyze information and data objectively and logically
• Ability to apply creative thinking and problem-solving skills to complex challenges
• Ability to evaluate the reliability and validity of sources and evidence
• Ability to communicate effectively and persuasively with diverse audiences
• Ability to identify and anticipate potential risks and opportunities
• Possess excellent communication and interpersonal skills

JOB DESCRIPTION

• Plan and co-ordinate on the project progress and schedule and ensure timely completion
• Attend project meeting and prepare report for project progress update
• Prepare project budget and cost estimation
• Coordinate and plan to achieve project milestones, project deliverables and schedule monitoring
• Manage, control and monitor all project activities such as engineering design, site execution, testing and commissioning of project
• Prepare / review as built iso for claim purpose, follow up with client for any outstanding DO issue
• To prepare progress claim report and submit progress claim documents according to client requirement
• To prepare operations and maintenance manual after project completion
• To coordinate with inter-departments for operations matters (procurement, engineering, group office)

Competency Requirements

• Diploma or Degree in Mechanical Engineering
• At least 3 years of working experience in the related field
• Familiarity with semi-conductor/construction industry
• Proficient in Microsoft Office
• Knowledge of QA/QC procedure (PQR/WPS) will be an added advantage
• Multi-tasking team player with excellent interpersonal and communications skills
• Attended QEHS related awareness training

Description

• Lead, guide and train technicians
• Troubleshoot and diagnose faulty equipment reported by customers
• Check parts needed and ascertain costs of parts
• Repair Samsung CE produt at customer's place
• Update repair status in the system and follow up the case until job finish
• Answer customers' queries about repair details and parts change
• Escalate case to principal if necessary
• Visit customers to repair equipment on-site
• Any other ad-hoc duties as assigned

Requirement

• Independent and ability to work as a team
• Willing to learn
• Positive attitude
• Minimum GCE 'O' Level
• Able to converse/explain in English
• Able to carry/bring down heavy home applicance/s
• Prefer to have electronic product repair experience
• Preferably with washer/fridge repair experience
• Singapore class 3 driving license is a MUST

Training will be provided.

Working hours: Monday - Friday from 9am to 6pm / Saturday from 9am to 1pm (but must suport full day)

Job Responsibilties

• To prepare project QA & QC related documentation for wind farm related structure/submarine cable transportation and installation/ testing/ commissioning.
• To perform internal and external coordination to meet project quality requirement as per project quality plan.
• To implement and monitor project quality related compliance.
• To conduct fabrication site inspection as required at designated fabrication site, at various construction stages.
• To assist Project Manager in preparing project quality related documents to fulfil owner’s requirement.
• To assist in procurement of quality related items for operation.
• To coordinate with Project Engineer/Manager/T&I Manager in fulfilling quality related matters in project management.
• To be able to liaise with engineer for efficient workflow and contributing to better idea to improve work method.
• Respond to incoming requests for information, requests for proposals in a professional and creative manner.

Job Requirements

• Minimum Diploma/Bachelor’s Degree in Science/Engineering or equivalent
• MIn 5 years of relevant experience in the Oil & Gas, Renewal Energy industry
• Proficiency in ISO 9001:2015 Quality Management System
• CSWIP 3.1 certification or higher
• NDT Level II certification or higher

Responsibilities:

• Creates detailed designs for HVAC systems, including calculating heating and cooling loads, selecting
• appropriate equipment, and specify in system components.
• Prepares technical documentation/drawings, including Equipment Technical Specification, Duct &
• Instrument Diagram, Functional Design Specification, and Site Acceptance Test etc., and submit as per
• project schedule.
• Lead and manage technical meetings with shipyard/client.
• Works closely with shipyard/client, production and project team, suppliers and auditors
• Assist Engineering manager for engineering design and drawings works
• Other duties as assigned by the Management

Requirements:

• Degree/Diploma in Engineering or its equivalent
• Minimum of 3 years of experience in mechanical engineering, preferably in the HVAC marine and
• offshore sectors.
• Proficiency in AutoCAD software (AutoCAD), Carrier HAP (Hourly Analysis Program).
• Proficient in MS Office Word, Excel.

As an Ecolab Process engineer, the primary responsibility revolves around implementing tailored chemical treatment solutions for clients in the refinery and chemical process industry. This entails not only delivering effective treatments but also providing value-added services and managing projects aimed at reducing the Total Cost of Operation (TCO) for the clients. Additionally, the application engineer should be readily available to address any troubleshooting or queries related to Ecolab’s services and products. Given that refineries and chemical plants operate 24/7, the application engineer shall be committed to assisting clients even beyond regular office hours when necessary.

• Leading Chemical Treatment Programs: Take charge of implementing chemical treatment programs at the client’s site. Focus is on ensuring optimal performance and promptly addressing any deviations from the treatment plan.
• Reporting and Communication: Provide regular chemical treatment program reports to clients, keeping them informed about progress and updates according to the agreed schedule.
• Inventory and Equipment Management: Managing chemical inventory is essential. Oversee stock levels and equipment replacement parts program to ensure timely replenishment to support seamless operations.
• Monthly Reviews: Prepare and deliver comprehensive monthly review materials to clients. These reviews serve as a valuable platform for discussing program effectiveness and identifying areas for improvement.
• Analytical Field Testing: On-site field testing is a crucial aspect of the role. Conduct rigorous analytical tests to identify and rectify any off-specification issues within the chemical treatment program.
• Proposal Development: Collaborating closely with managers, contribute to the development of chemical treatment proposals. These proposals aim to enhance efficiency and address specific client needs. Participate in new application start-ups and evaluations.
• Value-Added Projects: Actively source and develop value-added projects in collaboration with clients. These projects are designed to reduce the Total Cost of Operation (TCO) with Ecolab’s product.
• Client Relationship Management: Building and nurturing strong relationships with clients is paramount. Frequent engagement ensures effective communication and mutual understanding.
• Subcontractor performance Management: Qualify, coordinate and monitor subcontractor’s performance delivery to enable seamless flow and delivery to end customer’s expectation.
• Troubleshooting and Collaboration: When clients encounter challenges related to chemical treatment programs or Ecolab’s products, step in to troubleshoot and collaborate with team members to find solutions.

Requirements:

• Educational Background: A Bachelor’s degree in Chemistry, Chemical Engineering or Environmental Engineering, coupled with relevant industry or technical experience is preferred.
• Industry Comfort: The successful candidate should feel at ease supporting clients within the petrochemical industry.
• Communication Skills: Exceptional organizational, interpersonal, and verbal and written communication skills are essential. Clear and concise communication is crucial in this role.
• Reporting Proficiency: The ability to write and maintain clear, concise reports using standard laptop computers is a key requirement.
• Logical Thinking and Decision-Making: We seek an individual who can think logically, apply common sense, and make informed decisions.
• Multitasking and Troubleshooting: Able to troubleshoot problems, manage multiple projects simultaneously and maintain project schedule timelines.
• Self-Motivation and Teamwork: The ideal candidate is self-motivated, goal-oriented, and equally adept at working collaboratively within a team.
• Safety: Able to comply with the Refinery and petrochemical industry and client safety requirement.
• Commuting: The role involves commuting to Jurong Island, and a company car will be provided for transportation. SG Class 3 driving license required.

Job Description

• Identify and evaluate problems / root cause of process inefficiency.
• Identify and source for the potential improvement method to improve process efficiency (Safety, Quality, Cost, Delivery and Environmental).
• Lead Project Team (Engineers and Technicians) on process improvement and development activities assigned.
• Develop process digitization concepts and drive big-data analytics for process knowledge improvement.
• Work closely with relevant departments for process improvement and breakthrough projects.
• Present and manage project progress, cost and completion deadline according to schedule.
• Any ad-hoc duties as assigned.

Job Requirements

• Degree in Metallurgy, Materials Science / Engineering, or equivalent with more than 3 years of relevant experience (Experience in Steel / Aluminum metallurgy and Heat Treatment is preferred).
• Diploma in the above-mentioned fields with more than 6 years of relevant experience.
• Knowledge of manufacturing processes and IIOT solution deployment is preferred.
• Preferably Sound knowledge in Process Improvement Methodology.
• Willing to travel; Willing to station 3-12 months in other countries subjected to project requirements.

Permanent, Full Time

We are seeking candidates with:

· A diploma/degree in Marine & Offshore Engineering, Mechanical Engineering, or Electrical Engineering.

· At least 2 years of experience in Engine Repair & Maintenance.

· Fresh graduates are welcome, and the company will provide training.

Roles & Responsibilities

· Perform the repair, maintenance, or overhaul of marine diesel engines 2 & 4 stroke under the supervision of Engineer / Technicians.

· Comply with all the requirements to carry out the jobs in the shipyards or anchorages.

· Lifting and shifting heavy components of engine back to the workshop for repair/reconditioning and vice-versa.

· Ensure prompt response and smooth communication with the customers

· Perform other tasks as may be assigned by the Operation Manager

Job Requirements:

· Relevant marine / mechanical / engineering qualification

· Hands-on experience in trouble-shooting, maintenance and repair is an added advantage

· Candidates with no experience may apply as apprentices as training will be provided

· Willing to work in a shipyard/anchorage environment

· Able to work overtime as and when needed

An attractive remuneration package and career growth opportunities await the successful candidates. Interested applicants are invited to email with detailed resumes indicating their current and expected salary.

Job Description:

• Ensure incoming equipment meet the purchase specifications
• Arrange for protection and maintenance of equipment and system
• Review the commissioning work processes to enhance efficiency and productivity
• Review the commissioning work processes to enhance efficiency and productivity
• Coordinate with all sections for testing / commissioning requirements with different stakeholders and arrange for facilities and instruments for the job

Job Requirement:

• Degree/ Diploma in Naval Architecture/ Civil/ Marine & Offshore/ Mechanical / Electrical / Chemical Engineering / Certificate of Competency (Marine Engineer Officer) Class 1 (Motorship), or its equivalent
• At least 4 years of relevant experience for Engineer position, and 6 years of relevant experience for Senior Engineer position
• At least 4 years of relevant experience for Engineer position, and 6 years of relevant experience for Senior Engineer position.

Working hours & locations:

(Tuas Yard)

Pioneer Sector 1, Singapore 628437

(Islandwide transport provided)

Mon to Thurs: 8:00am - 5:15pm

Fri: 8:00am - 4:30pm

Interested candidates are invited to send us an updated resume with your current and expected salary and earliest availability.

We regret that only shortlisted candidates will be notified.

Please note that your personal data disclosed to Seatrium (SG) Pte Ltd and our group of companies, shall be used for the purposes of evaluation and processing in accordance with our recruitment processes and policies. By providing your personal data, you have consented to the aforesaid purpose under the provisions of the Personal Data Protection Act 2012.

• Candidate must possess at least Bachelor's Degree/Post Graduate Diploma/Professional Degree in Engineering(Civil) or equivalen.
• At least 2 years(s) of working experience in the related field is required for this position.
• Required Skill(s): Understand drawing, Quantity take off, Prepare BQ, Familiar with costing, Supplier sourcing, Contract administration.
• Preferably Senior Executive specialized in Engineering-Civil/Construction/Structural or equivalent.
• Familar with structural steelworks.
• Other QS duties as assigned from time to time.

• Job Purpose

Biosearch Technologies™ provides products and services for genomic analysis that support mission critical applications for global customers in agrigenomics and human healthcare. The portfolio offers integrated tools and technologies to accelerate sample preparation, amplification, cloning and expression, next generation sequencing (NGS), custom oligonucleotide synthesis, nucleic acid chemistry reagents, and oligo therapeutics. Biosearch Technologies is currently recruiting for a field service engineer II to join us in providing front-line technical support to our repertoire of genomics platform and consumables as described above.

With a focus on always putting customers first, our Field Service Engineer is expected to work closely with our regional customer base to ensure maximum equipment uptime, software optimal utilization, training and troubleshooting functions. 

Field Service Engineer is expected to be a role model and poise to mentor and develop junior service engineers on the day-to-day activities, coaching sessions and able to report and assign task to juniors and self and provide reports back to global service leads.

Key Responsibilities

• Build strong service support rapport with regional key account customers in APAC.
• Site Preparation; instrument Installations; training; troubleshooting, preventative maintenance as core task
• Facilitating service contract proposals and tracking as and when required.
• Function as an integral part of a wider global support team to offer “In Time zone 24/7” emergency service support call and troubleshooting assistance as and when assigned with urgent breakdown call with overnight travel either regionally or globally.    
• Train and support customer in the application of “SFDC sales force” CRM platform as a service case tool to record and track service cases
• Support the generation of training aids and technical documentations as required
• Provide timely and concise Pre/Post trip reports and SFDC updates to maintain proper customer CRM records
• Work closely with the commercial and customer service team to ensure prompt and responsive customer support in building strong customer allegiance for the LGC, D&G branding.
• After normal office hours on-call support assignments (global support rotation) as part of a global technical support framework.
• Involving in engineering project, product management request for technical feedback/support
• The individual will be responsible for instrument commissioning, training, test and repair of equipment, and preventative maintenance.
• Expected to mentor junior field service engineers in problem resolution.
• Seeks continuous improvement processes to optimize technical support to our customers in the region.
• This position is responsible to effectively communicate instrument status, issues, and customer complaints and needs to appropriate managers and internal resources.  Will be responsible to proactively take ownership and follow-through with generated issues or complaints reported from themselves, as assigned, or from junior service engineers.
• Responds with flexibility and collaboration to the needs of the business – both internally and externally – by addressing important corporate initiatives when requested by management.
• Ability to handle clients, distributors professionally during all interface and maintain a positive company images
• The motivation to learn and constantly improve processes and tools
• Adhere to company safety standards and promote safety culture throughout the company
• Any other ad-hoc projects and duties as required by the management

JOB DESCRIPTION: Candidate will be involved in industry projects and use 3D printing technology and other post processes to build parts.

RESPONSIBILITIES:

-Carry out data preparation and operate equipment to perform 3D printing, post-processes, inspection and testing as part of the industry project.

-To perform characterisation of coupons and components fabricated using 3D printing.

-Good skills in recording data, preparing and presenting technical results.

-Responsible for preparing and maintaining documentation for the operation of different equipment.

-Carry out routine maintenance, diagnostics checks, engage OEM vendors for preventive maintenance.

-Practice good housekeeping, organisation, and safety in the workplace.

-Responsible for ensuring duties are performed in a safe, efficient, and effective manner.

-To be a team player and learn new skillsets in an integrated team that develops new and advanced additive manufacturing technologies.

JOB REQUIREMENTS:

-NITEC or Diploma in Industrial Engineering, Aerospace Engineering, Mechanical Engineering, or in a relevant engineering discipline.

-At least 2-years work experience in manufacturing roles within the aerospace / MRO / oil and gas / manufacturing industry.

-Hands on experience with CAD/CAM software preferably NX would be preferred.

-Hands on experience in 3D printing is an added advantage.

-A team player who is motivated to solve technical challenges and deliver on time to customers.

-Willing to learn and adapt to cutting edge technology quickly.

-Good communication and interpersonal skills.

The above eligibility criteria are not exhaustive. A*STAR may include additional selection criteria based on its prevailing recruitment policies. These policies may be amended from time to time without notice. We regret that only shortlisted candidates will be notified.

• Coordinating with the client and attending client meeting whenever required
• Supervise and coordinate with team to produce deliverable per schedule and quality
• Administrative role of 3D modelling process with AVEVA software
• Review and comment on various engineering documents
• Design & incoporate structural components of project into AVEVA 3D model and produce 3D structural models
• Multi-discipline design coordination to avoid & correct interferences in AVEVA 3D model
• Prepare construction drawings (2D Structure drawings, bending template, profile nesting, plate nesting and material list) utilizing AVEVA Marine Drafting
• Modelling of Equipment and Outfitting in AVEVA
• Extraction of Outfitting General Arrangement from AVEVA
• Prepare a wide range of engineering related documents such as plot plans, Key plan
• Extraction of Piping layout and Piping General Arrangement from AVEVA
• Extraction of Isometric drawing with MTO and Line list
• Data consistency and Clash checking in AVEVA
• Prepare support drawings
• Checking the piping and other discipline documents as per shipyard payment
• Perform 3D Modelling of Electrical equipment and cable tray/ladder, supports and instruments in AVEVA
• Preparation of 2D deliverables (lighting layout, wiring diagram, equipment layout, interconnection diagram, cable tray/ladder layout, cable tray/ladder fill report and MCT layout)

Purpose and Scope

We are seeking a highly skilled and motivated E&I Engineer to join our team. The ideal candidate will possess extensive experience in electrical and instrumentation systems within power or utilities plant environments. This role involves ensuring optimal performance, safety, and reliability of E&I equipment while leading maintenance initiatives and improvements.

Key Roles and Responsibilities

• HSSE Compliance: Ensure adherence to plant Health, Safety, Security, and Environment (HSSE) standards. Actively participate in HSSE walkdowns and initiatives to maintain high safety standards.
• Methodology Preparation: Develop, review, and implement Method Statements (MS) and Risk Assessments (RA) for all electrical and instrumentation work activities to mitigate risks and enhance safety.
• Maintenance Planning: Plan and schedule both corrective and preventive maintenance works. Collaborate with operations, OEMs, and contractors to prioritize tasks, mobilize workforce, allocate resources, and procure necessary spare parts.
• Team Leadership: Lead and mentor technicians in executing preventive and corrective maintenance tasks, ensuring adherence to procedures and standards.
• Issue Troubleshooting: Diagnose and troubleshoot critical and major plant issues, participate in Root Cause Analysis (RCA) to identify solutions, and drive continuous plant improvement initiatives while managing costs effectively.
• Shutdown Management: Plan, schedule, and coordinate vendor/OEM shutdown maintenance of E&I systems. Lead shutdown activities and ensure thorough documentation is maintained.
• Procedure Development: Establish and optimize maintenance procedures for all electrical and instrumentation systems, promoting best practices.
• Instrumentation Expertise: Conduct maintenance and troubleshooting on field instrumentation, including control valves, performing loop checks, and executing calibration of instrumentation systems.
• Control Systems Proficiency: Troubleshoot and maintain PLC (Programmable Logic Controller) and DCS (Distributed Control Systems), with a strong emphasis on experience with Yokogawa Centum DCS systems.
• Electrical Systems Maintenance: Provide expertise in maintaining electrical systems, including switchgear, transformers, MV/LV switchboards, Fire alarm and CCTV systems.
• Spare Parts Management: Oversee the review and maintenance of plant critical spare parts inventory, ensuring availability and readiness.
• Documentation and Reporting: Maintain accurate records of maintenance activities and contribute to the preparation of technical documentation, standard operating procedures (SOPs), and maintenance manuals.
• Ad-hoc Duties: Execute other tasks and responsibilities as assigned to support operational objectives.

Qualification, Skills and Experience

• Bachelor’s degree or diploma in Electrical, Instrumentation, or Control System Engineering.
• Minimum of 8 years of relevant experience in a power plant or utilities plant environment.
• Technical Proficiency: Strong knowledge of field instrumentation, electrical systems, control systems, and industry standards.
• Problem Solving: Excellent analytical and troubleshooting abilities with a methodical approach to problem resolution.
• Team Collaboration: Proven ability to work effectively in a team environment, fostering collaboration and teamwork.
• Communication Skills: Strong communication and interpersonal skills, with the ability to present technical information clearly to various stakeholders.
• Proactive Attitude: Demonstrated ability to stay current with new technologies and apply innovative solutions to optimize plant operations.
• Leadership Qualities: Effective leadership and mentoring skills with a commitment to developing team members.
• Adaptability: Flexible and resourceful, with a positive attitude and willingness to learn from experienced colleagues.

At Sembcorp, our shared corporate behaviours underpin all the work that we do in building a sustainable future:

• Institution-first Mindset – Put the interest of the Group ahead of individual interests.
• Collaboration – Deliver through collaborating across markets, businesses and functions.
• Accountability – Hold team and self accountable to deliver on our commitments.

Responsibilities:

• Manage technical transfer of products/projects in assembly, testing, and customer interactions.
• Offer technical support for manufacturing and testing during product builds.
• Assist QC with technical support in resolving RMA issues.
• Support QA in compliance, regulatory matters, customer interactions, and audits.

Requirements:

• Diploma in Electronics Engineering and above.
• Minimum 2 years of working experience in Electronics Manufacturing Industry.
• Skilled in managing product/project manufacturing, transfers, and troubleshooting.
• Experienced in PCBA manufacturing and testing for products/projects.
• Preferably experienced in a manufacturing environment with ISO13485 and FDA standards.

_______________________________________________________

HOW TO APPLY :

Interested candidates, please submit your resume by clicking on “Quick Apply” or contact [email protected] for more details.

Please provide following information in the resume for immediate processing

1) Reasons for leaving current and/or last employment

2) Last drawn and/or current salary

3) Expected salary

4) Date of availability and/or Notice Period

All applications will be treated in strictest confidence and only shortlisted candidates will be notified

Wee Wai Dan

EA License No : 03C5391

EA Reg No : R22109628

Responsibilities:

• To have a role in VSAT product development team that participates in designing of LNA and Power Amplifier.
• Operating up to Ka band frequencies, the Up/Down Converter facilitates communication as part of its functionality.

Requirements:

• Bachelor’s Degree in Electronics Communication Engineering or equivalents.
• Minimum 3 years of experience in any RF systems.
• Experience in RF circuit design (LNA, PA, Up/Down Converter, Synthesizer).
• Experience in using simulation software.
• Experience in VSAT system or subsystem design.

____________________________________________________________

HOW TO APPLY :

Interested candidates, please submit your resume by clicking on “Quick Apply” or contact [email protected] for more details.

Please provide following information in the resume for immediate processing

1) Reasons for leaving current and/or last employment

2) Last drawn and/or current salary

3) Expected salary

4) Date of availability and/or Notice Period

All applications will be treated in strictest confidence and only shortlisted candidates will be notified

Wee Wai Dan

EA License No : 03C5391

EA Reg No : R22109628