Job Description :

• Project management and daily operations including inspections, handover, site measurements, project management.
• Prepare submission of shop drawing, method statement, progress claims and project management reports.
• Supervise and monitor projects are carried out in accordance to company's operating procedures, quality standards and contractual specifications.
• Ensure environmental, safety and health practices are carried out at all times.

Requirements :

• Candidate must possess at least a Diploma / Bachelor's Degree in Civil Engineering or its equivalent.
• Positive attitude, including being self-motivated, responsible, and taking ownership of work.
• Min. 5 years of working experience in Construction Industry are preferred.
• Strong analytical and communication skills.

· Site project management.

· Overall project planning, scheduling, monitoring and updating to meet project completion targets.

· Daily site activities planning, preparing work breakdown, daily site operations, site coordination, monitoring and report work progress.

· Work closely with sub-contractors on project progress and ensure timely work arrangements

· Liaise with consultant and carry out site inspection.

· Attend weekly or monthly meeting with sub-contractors on work progression and prepare monthly meeting progress report.

· Preparation of structural analysis, loading calculation and drawings.

· Establish good relationship with all relevant parties.

· Ensure site safety & compliance to authorities’ requirements.

Requirement

- Degree in Civil or relevant Engineering

- 3-5 years’ minimum experience in Infra-structure project more than 200million.

· Site project management.

· Overall project planning, scheduling, monitoring and updating to meet project completion targets.

· Daily site activities planning, preparing work breakdown, daily site operations, site coordination, monitoring and report work progress.

· Work closely with sub-contractors on project progress and ensure timely work arrangements

· Liaise with consultant and carry out site inspection.

· Attend weekly or monthly meeting with sub-contractors on work progression and prepare monthly meeting progress report.

· Preparation of structural analysis, loading calculation and drawings.

· Establish good relationship with all relevant parties.

· Ensure site safety & compliance to authorities’ requirements.

Requirement

- Degree in Civil or relevant Engineering

- 3-5 years’ minimum experience in Infra-structure project more than 200million.

Responsibilities

Prepare project management plan and its sub-plans, such as: work scope statement, schedule plan, manpower plan, tools and equipment plan, procurement plan and OHSE plan

• Provide engineering support in project or plant maintenance • Coordinate internal and external audit review

• Engineering calculations associated with current carrying capacity of cables, wires, fuses and other circuit protective devices.

• Procedures for inspection, testing and certification of electrical fixed installations.

• Industrial hazards, safety and health precautions, and environmental concerns.

• Installation practice and regulations, and relevant codes of practice.

Requirements & Professional Skills•

Min. Diploma in Electrical Engineering or equivalent

Min. 0-1 year of relevant experience in electrical work

Roles & Responsibilities

The responsibility of this position is to lead the project assigned to successful completion within the project schedule & scope as well as obtain the targeted profit and achieve high customer satisfaction.

The incumbent shall carry out the following responsibilities, but not limited to:

• Resolve complex issues with clients & consultants, JV partners, and/or sub-contractors which are not able to be handled by subordinates.
• Direct project team members to achieve targets of safety, quality, profit and timely completion of the project. To monitor the progress of the project according to the targets set.
• Identify key staff to lead the project and delegate responsibilities. Provide guidance and direction to staff for them to work towards the targets set.
• Personnel management and development.
• Oversee the tender works including providing directions on planning, construction technique, quality of tender submission documents, risk and issue management, tender price negotiation with suppliers and subcons for finalization.

Requirements:

• Candidate must possess at least a Bachelor's Degree majored in Civil Engineering recognised
• Minimum 6 years of local experience in construction industry
• Experience in Road Works / Building Works Project will be preferred
• Proven working experience in project management
• Excellent client-facing and internal communication skills
• Independent and organised with positive work attitude
• Possess strong written
• Good decision maker and team player
• Auto Cad designing
• Class 4 with Forklift licence

Job Requirements :

• Bachelor Degree in Civil Engineering recognised by PE Board ( Singapore )
• Minimum 1 to 2 years of design experience in a local consultant firm
• Graduate engineer with a positive attitude may also apply
• Candidates with ( partial ) overseas experience may be considered
• Conversant with current design codes and design process in Singapore
• Independent and organised, with positive work attitude
• Willing to put in extra effort / time when need arises
• Strong communication skills and effective team player
• Proficiency with ACAD will be an added advantage
• Able to execute submission to relevant agencies / authorities in Singapore
• Able to co-ordinate projects with other team members
• Willing to learn architectural permitting / compliances to Singapore authorities

`

Job Description :

• Support Senior Engineers in the detail design and design coordination of Civil, Structural and Geotechnical projects.
• Responsible for the execution of structural design and drafting works
• Preparation of calculations and review of structural design drawings
• Customer specifications, applicable codes, standards and other generally accepted
• practices.

Responsibilities :

• Design of temporary and permanent works
• Carrying out analysis design of buildings and infrastructure
• Co-ordination of projects including submission to local authorities and liaison during the construction stage
• Liaise with clients, consultant, and authorities on technical matters

• Oversee daily construction activities, ensuring compliance with safety regulations, quality standards, and project specifications.
• Collaborate with architects, engineers, and other construction professionals to develop project plans and schedules.
• Monitor project expenses, track budgets, and implement cost-saving measures where possible.
• Conduct regular site inspections to ensure that construction work meets design specifications and safety standards.
• Address and resolve any issues or delays that arise during the construction process.
• Maintain accurate records of project progress, changes, and communications with stakeholders.
• Ensure all work complies with local building codes, regulations, and company policies.
• Prepare and present progress reports to project managers, clients, and other stakeholders.

Qualifications:

• Bachelor’s degree in Civil Engineering from an accredited institution.
• Preferably with atleast 2 years of experience in construction engineering or a related field.
• Proficiency in construction management software (e.g., Procore, Buildertrend)
• Strong understanding of construction methods, materials, and legal regulations.
• Excellent problem-solving and analytical skills.
• Effective communication and leadership abilities.

· Be part of a team in the implementation of Nationwide Mobile Network

· Preparation of proposals and documentation according to project standards

· Conduct site works, such as survey, site meetings, site handover

· Perform Commissioning and Integration of communication equipment

· Perform Coverage Walk Test and upload data for processing

· Competent to carry out troubleshooting with on-job training

· Coordinate with installation teams on site requirements and progress

· Update of site status

· Ensure Compliance with workplace safety, health and other regulatory requirements

Requirements

• Diploma in Electronics/ Mechatronics/ Electrical/ Communication Engineering or related discipline.
• Cad Software knowledge is an added advantage.

ROLES & RESPONSIBILITIES

• To be responsible for all deliverables required in the agreement with Singapore General Hospital.
• To organize his team to align with the overall client’s expectation and contractual requirements andsupport the operations of the hospital, especially in the front end engineering and customersupports. To plan and execute all fix it and programmed maintenance within the frame work of theallocated resources.
• To plan the resources available to align with the operational requirements for fix it and programmedmaintenance.
• Managing all minor repairs and fix it work within the budget.
• Work closely with other service providers in the hospital to be part of the team to create a safe andsound environment for the patients, staff and visitors, especially ISS House Keeping and Portering team to demonstrate the strength and capability of ISS’s integrated service model to be productive, efficient and effective.
• Constantly engaging the client and end users to seek feed back, gaps and improvementopportunities through survey and dialogue.
• Responsible for overall customer and end users relationship management while exercising costcontrol monitor and measure with the awareness to generating additional works to enhancemargin.
• To stabilize the team during upon operations and continued to seek improvement in theorganization structure and operations process to improve supports to the hospital.
• Manage relationship with all specialist sub-con and contractors appointed by the hospital toachieve the required KPI, client’s expectations and deliverables in the contract with SingaporeGeneral Hospital.
• Be part of the team to management energy saving and initiatives.
• Identify engineering issues and trouble shooting to response to end users’ request. Resolving andmitigating potential engineering problems and potential cause to system breakdown. Work closelywith the Central Operations to tackle engineering problems.

JOB REQUIREMENTS

1. Contractual fulfilment of ISS for the outsourced facility management contract

2. Compliance of all statutory requirements

3. Successful mobilization

4. Achieve financial margin set by the management

5. Motivation and leadership of the outsources facility management team

6. Meeting KPI requirements and meet customers’ and end users’ expectations

7. Healthy QEHS records

8. Provide an safety environment to enhance the patient’s staff’s and visitors’ experience

• Responsible for all major mechanical and electrical and instrumentation equipment
• Lead a team of technical executives/technicians for troubleshooting works
• Manage the purchase of major supply and repair items alongside with supervision and execution of preventive and condition monitoring of major electrical equipment
• Handle hands-on preventive maintenance and breakdown maintenance work
• Coordination with clients and subcontractors to meet the site/project requirements
• Carry out rectification of faults within a specified time
• In-charge of troubleshooting of M&E system
• Responsible for planning, execution and supervision of all facilities management and operational activities
• Responsible for project cost control and service standards
• Any other ad hoc duties assigned

Job Requirements

• Degree or Diploma in Engineering.
• 3-5 years of relevant working experience
• Technical knowledge of M&E systems(including, but not limited to, fire protection systems, AV systems and ACMV systems) is an added advantage
• Able to perform shift work if required
• Preventive Maintenance Troubleshooting

SPECIFIC RESPONSIBILITIES:

• ensures all drawings, bills of materials, purchase requisitions and quality checks are completed as per project schedule and ISO 9001 & 14001 processes.
• conducts design reviews to analyze specifications, sketches, drawings, ideas, and related data to assess factors affecting component designs and the procedures and instructions to be followed.
• confers with customer representatives to review specifications and answer questions pertaining to installation of systems.
• supports during manufacturing, assembly, de-bug, and customer buy-off.
• writes technical reports, manuals and technical support documentation
• performs a wide variety of additional functions to meet project schedules and product deliveries
• reads, understands, and acts upon mechanical drawings including piece part and assembly drawings, work instructions, and procedures
• determines manufacturing methods, techniques, and procedures as required to perform tasks as required for to ensure designs perform as required
• designs test fixtures and setups as needs arise
• communicates with vendors to support procurement and to address issues
• Responsible for any other role as assigned by the Project Manager

QUALIFICATIONS & EXPERIENCE:

• Diploma or Degree in Mechanical / Manufacturing Engineering or an equivalent degree in related technical field desired
• 3 to 5 years relevant experience in mechanical engineering and material handling systems across various industries.
• AutoCAD and solid works proficiency
• Knowledge of design techniques, tools, and principle involved in production of precision technical drawings, and models
• Knowledge of the practical application of engineering science and technology. This includes applying principles, techniques, procedures, and equipment to design and production
• Knowledge of design principles, steel and aluminum part creation, sub assembly and pneumatics.
• Ability to work independently in designing and liaising with customers on technical specifications and requirements
• Participate in and effectively communicate in group discussions and meetings
• Ability to work well in a team environment
• MS Office proficiency

• Oversee daily construction activities, ensuring compliance with safety regulations, quality standards, and project specifications.
• Collaborate with architects, engineers, and other construction professionals to develop project plans and schedules.
• Monitor project expenses, track budgets, and implement cost-saving measures where possible.
• Conduct regular site inspections to ensure that construction work meets design specifications and safety standards.
• Address and resolve any issues or delays that arise during the construction process.
• Maintain accurate records of project progress, changes, and communications with stakeholders.
• Ensure all work complies with local building codes, regulations, and company policies.
• Prepare and present progress reports to project managers, clients, and other stakeholders.

Qualifications:

• Bachelor’s degree in Civil Engineering from an accredited institution.
• Preferably with atleast 2 years of experience in construction engineering or a related field.
• Proficiency in construction management software (e.g., Procore, Buildertrend)
• Strong understanding of construction methods, materials, and legal regulations.
• Excellent problem-solving and analytical skills.
• Effective communication and leadership abilities.

• Designing, developing and enhancing electro-mechanical systems and mechatronic devices.
• Creating automated systems and the software to control them.
• Conducting research, documenting findings, and presenting reports at meetings.
• Developing design documents for mechanical parts and final products.
• Identifying areas of weakness in the Equipment and making recommendations for improvement.
• Understanding problems or client briefs and developing solutions that satisfy them.
• Selecting the required tools and materials for the process.
• Assisting with recruitment, onboarding, and training of junior Engineers or Apprentices.
• Attending workshops, training sessions, and conferences to network with others and stay on top of field advancements.
• willing to do night shift
• any service requirement from the site must go and attend any time
• Willing to work Night Shift

• Develop and implement maintenance schedules for machinery and equipment.
  Ensure all maintenance and repair works adhere to specifications, are completed on schedule, within budget, and accurately documented.
  Liaise internally between operations teams to address machinery breakdowns and operational concerns.Coordinate data collection on auxiliary materials from operations teams and report on a weekly basis.
  Manage receipt, maintenance, and monitoring of machinery parts inventory.
  Collect machinery maintenance repair data and costs for analysis.
• Prepare monthly machinery reports detailing maintenance activities and performance metrics.Undertake additional tasks as required to support operational needs and project requirements.Preferably with at least 3 years of working experience in related field.
• Comfortable working in Workshop environment.
• Those who have experiences in machinery spare parts will have added advantage.
• Resourceful with positive attitude and able to work independently.

Job Responsibilities

1. Provide front and backend supports for the following security systems:

a. Access Control System – Integrated Security Management System (ISMS);

b. Electronic Key and Cabinet System: Key Management System (KMS);

c. Radio Communications: Digital Trunk Radio System (DTRS);

d. CCTV System – Video Surveillance Management System (VSMS);

e. Entry / Exit Access Turnstiles;

f. Crash Barriers; and

g. Vehicle Alert System

2. Perform corrective and preventive maintenance on all security systems.

3. Ensure critical system fault reported rectified within the shortest possible time to prevent disruption to operation.

4. Update and maintain fault rectification report.

5. Maintain security system stock inventory to ensure sufficient spare.

Job Requirements

• Meet the relevant Regulatory Authority's statutory requirement of minimum 21 years of age.
• Diploma/Higher NITEC/NITEC from a recognized training institute.
• Must be able to work rotating shifts, including weekends and public holidays
• Technical knowledge or experience in electrical/electronic work. IT Network knowledge would be an added advantage.
• Experience in CCTV or card access system.

Job Duties:

• Handle the day-to-day operation and support of voice infrastructure across Asia regional offices.

• Handle voice projects; design & deployment and post support.

• Perform network capacity planning and proper monitoring of voice infrastructure system.

• Perform system Installation, patching, and hardware maintenance.

• Attention to detail, documentation, and accurate record-keeping skills.

• Coordinate with IT of Head Office and regional units for the project and standard implementations.

Job Requirements:

• Degree in computing science or any related discipline.

• 7 years of IT working experience with minimum 5 years hands-on experience with Cisco equipment i.e. Cisco Call manager, Router & Switches.

• Technical knowledge and practical experience with:

o Cisco Unified Communication Manager

o Cisco Unity Connection, Cisco IM & Presence and Jabber

o Cisco Voice Gateway and VG Analog Converter

o Protocols such as MGCP, H.323 and SIP Protocol

o Voice Call Routing and Dial Plan

• Solid experience in troubleshooting voice-related issue.

• Relevant experience in voice recording (active & passive)

• Cisco certification is an added advantage.

• Able to provide support during non-business hour calls.

• Ability to prioritize and handle multiple tasks and projects concurrently.

• Positive and supportive attitude towards team members.

• Extreme discretion in handling of confidential information.

• Excellent oral and written communication skills.

• Strong Knowledge on IP Telephony from operational and design perspective.

• Excellent communication, interpersonal and logical skills

• Must be self-motivated and should demonstrate keen attention to detail and possess the ability to work autonomously

• Experience in Call Manager IP Telephony from operational and design perspective/ CISCO Jabber/ Cisco Voice Gateway and VG Analog Converter/ Protocols such as MGCP, H.323 and SIP Protocol, Voice Call Routing and Dial Plan and Relevant experience in voice recording (active & passive)

Interested applicants please send your resume in MS Word format and attention it to Tan Joanna (R1104661)

Shortlisted candidates will be notified

Data provided is for recruitment purposes only

www.ambition.com.sg

EA Registration Number: R22104385

Business Registration Number: 200611680D. Licence Number: 10C5117

Their duties and responsibilities include:

• Preparing and interpreting blueprints, technical drawings, and plans
• Collaborating with architects, contractors, and other construction professionals
• Planning, directing, and managing the site workforce and subcontractors
• Ensuring that all building procedures and materials comply with building codes, regulations, and standards
• Carrying out surveys and assessing the suitability of construction sites
• Performing quality control tasks on budgets, plans, materials, and the final product
• Inspecting and reviewing projects to monitor compliance with building and safety codes, and other regulations
• Assessing potential risks and drafting mitigation plans
• Providing technical advice and solving problems on site
• Ordering and managing resources and materials to meet project deadlines
• Preparing reports regarding job status and progress to stakeholders

Job Title: Level 1 Support Technician

Purpose of the Role

The Level 1 Support Team provides critical front-line support across all aspects of infrastructure. Working as part of a global team, they are responsible for:

• Pro-active monitoring of infrastructure.
• Performing initial triage of alerts and inbound support requests.
• Creating and assigning support cases to the Level 2 operational support teams.

This is a client-facing role with a high level of interaction, requiring the delivery of high-quality service and support. In addition to day-to-day activities, there are opportunities to be involved in internal projects and initiatives. The ideal candidate will have a demonstrated interest in Technology and Finance.

Responsibilities and Duties (include but are not limited to):

• Monitoring & Alerts:Monitor various alert systems and the Service Operation’s email, and respond to the Service Operation hotline.
  
• Issue Recording:Record all issues within the internal CRM system.
  
• Problem Determination:Provide first-level problem determination/triage on all issues (network/systems/application).
  
• Client Interaction:Acknowledge and resolve clients’ inquiries and issues within the prescribed Operational Level Agreement (OLA).
  
• Collaboration & Escalation:Engage the relevant Subject Matter Experts and other Service Operation personnel to ensure issues are resolved within the agreed SLA escalation matrix.
  
• Communication:Interface with clients, vendors, market participants, and financial exchanges.
  Manage formal communications to clients.
  
• Performance Reporting:Generate statistics on issues raised, resolved, time to resolution, and other Key Performance Indicators (KPIs).
  
• Team Engagement:Foster open communication between team members and managers, promoting ideas for improving service delivery.
  
• 24x7 Support Coverage:Work as part of a global team that provides 24x7 Level 1 Support coverage on a rotation basis.
  

Education, Skills, and Background (Including Education and Experience Requirements):

• 2+ years of experience in a similar customer-facing role.
• Degree or diploma in Computer Science, Computer Engineering, or a related discipline.
• Experience in a financial industry support role preferred.
• Excellent verbal and written English-language communication skills to manage customer relationships effectively.
• Strong process discipline with a working knowledge of Salesforce or other CRM systems.
• Working knowledge of Linux & Windows systems, network configuration, and general troubleshooting.
• Ability to work constructively as part of a team, sharing ideas and resources.

Desirable Skills:

• ITIL certification.
• Understanding of Financial Markets (Equity, Futures, Options).

Working Arrangements

This is a hybrid position. The role holder will participate in a shift rotation, working 5 days a week, covering the hours of 07:30 – 16:30 from Monday to Sunday (including at least one weekend day per week).

Interested candidates may apply through the application system. We regret to inform only Shortlisted candidates will be notified.

EA License No. 01C4394 • RCB No. 200007268E •Derrick Tiew Yong Han EA Registration No. R1877971

By sending us your personal data and curriculum vitae (CV), you are deemed to consent to PERSOLKELLY Singapore Pte Ltd and its affiliates to collect, use and disclose your personal data for the purposes set out in the Privacy Policy available at https://www.persolkelly.com.sg/policies. You acknowledge that you have read, understood, and agree with the Privacy Policy.

-To Project management Coordinate with main-con and consultant for drawing submission, material sample submission and meeting with main-con and consultant

-Select appropriate electrical materials to complete designs such as MSB, Distribution lighting fixtures, cable tray layout, lighting and receptade layout, single line diagrams, CCTV, data Telcom operational routing diagram, ELV systems, control schematic and writing diagrams

-Identify discrepancies in tender/contract/IFC drawings and raise queries for clarification, A and A ( R and R) + Constriction Filed

- Attend all operational matters related to the daily running of the project and Handle multiple projects simultaneously

-Testing and commissioning for Electrical apparatus

-QA/QC documentation review of engineering deliverables

-LV and HV cables sizing calculations and prepare a bill of material

-Planning workforce arrangement and supervision and working planning

-Giving progress reports regularly to teams and monitoring project schedules

-Prepare Electrical shop and As-builts SLD Rcp drawing

Job Description

Roles & Responsibilities

• Ensure performance complies with specications, technical clarications, and drawings.
• To guide and supervise on works arrangement and site activity.
• To check all installation drawings and prepare relevant schedule.
• Monitor the daily progress of activities and prepare daily report of the status of each assignment.
• Managing project budgets. Able to work on weekend/public holiday.
• Able to work regularly under rooftop.
• Able to use Microsoft suite of Software including project.
• Prociency in AutoCAD is preferred.
• Good organizational skills and communication skills. Good technical competency.
• Carry out the electrical cabling works, tray & trunking works with installation.
• Experience in integration of the sites.
• Minimum Certicate requirement in Safety Supervisor.
• Candidates with a Diploma in Electrical and Electronics Engineering or above Minimum 10 years working experience on related sites

Roles & Responsibilities

• Ensure performance complies with specications, technical clarications, and drawings.
• To guide and supervise on works arrangement and site activity.
• To check all installation drawings and prepare relevant schedule.
• Monitor the daily progress of activities and prepare daily report of the status of each assignment.
• Managing project budgets. Able to work on weekend/public holiday.
• Able to work regularly under rooftop.
• Able to use Microsoft suite of Software including project.
• Prociency in AutoCAD is preferred.
• Good organizational skills and communication skills. Good technical competency.
• Carry out the electrical cabling works, tray & trunking works with installation.
• Experience in integration of the sites.
• Minimum Certicate requirement in Safety Supervisor.
• Candidates with a Diploma in Electrical and Electronics Engineering or above Minimum 3 years working experience on related sites

Roles & Responsibilities

• Ensure performance complies with specications, technical clarications, and drawings.
• To guide and supervise on works arrangement and site activity.
• To check all installation drawings and prepare relevant schedule.
• Monitor the daily progress of activities and prepare daily report of the status of each assignment.
• Managing project budgets. Able to work on weekend/public holiday.
• Able to work regularly under rooftop.
• Able to use Microsoft suite of Software including project.
• Prociency in AutoCAD is preferred.
• Good organizational skills and communication skills. Good technical competency.
• Carry out the electrical cabling works, tray & trunking works with installation.
• Experience in integration of the sites.
• Minimum Certicate requirement in Safety Supervisor.
• Candidates with a Diploma in Electrical and Electronics Engineering or above Minimum 3 years working experience on related sites

The Site Engineer will be managing different parts of construction projects, supervising crew members, preparing estimates for time and material costs, completing quality assurance, observing health and safety standards, and compiling reports for different stakeholders. The Site Engineer should be able to work alongside various professionals and create work schedules that meet deadlines. The Site Engineer should demonstrate strong analytical and logical thinking skills, display a superb work ethic and thrive under pressure.

Required experience in bored pile works, diaphragm wall and deep soil mixing.

• Organizing materials and ensuring sites are safe and clean.
• Preparing cost estimates and ensuring appropriate materials and tools are available.
• Providing technical advice and suggestions for improvement on particular projects.
• Diagnosing and troubleshooting equipment as required.
• Negotiating with suppliers and vendors to ensure the best contracts.
• Authorizing technical drawings and engineering plans.
• Drawing up work schedules and communicating any adjustments to crew members and clients.
• Gathering data, compiling reports, and delivering presentations to relevant stakeholders.
• Delegating tasks and scheduling meetings and training sessions where required.
• Completing quality assurance and providing feedback to the team.
• Act as the main technical adviser on a construction site for subcontractors, craftspeople and operatives.
• Set out, level and survey the site.
• Check plans, drawings and quantities for accuracy of calculations.
• Ensure that all materials used and work performed are in accordance with the specifications.
• Oversee the selection and requisition of materials.
• Agree a price for materials and make cost-effective solutions and proposals for the intended project.
• Manage, monitor and interpret the contract design documents supplied by the client or architect.
• Liaise with any consultants, subcontractors, supervisors, planners, quantity surveyors and the general workforce involved in the project.
• Liaise with the local authority (where appropriate to the project) to ensure compliance with local construction regulations and by-laws.
• Communicate with clients and their representatives (architects, engineers and surveyors), including attending regular meetings to keep them informed of progress.
• Carry out day-to-day management of the site, including supervising and monitoring the site labour force and the work of any subcontractors - this is site-specific and may not be the case on all projects.
• Day-to-day management of the site, including supervising and monitoring the site labour force and the work of any subcontractors.
• Plan the work and efficiently organise the plant and site facilities in order to meet agreed deadlines.
• Oversee quality control and health and safety matters on site.
• Prepare reports as required.
• Resolve any unexpected technical difficulties and other problems that may arise.

Roles & Responsibilities

• Ensure performance complies with specications, technical clarications, and drawings.
• To guide and supervise on works arrangement and site activity.
• To check all installation drawings and prepare relevant schedule.
• Monitor the daily progress of activities and prepare daily report of the status of each assignment.
• Managing project budgets. Able to work on weekend/public holiday.
• Able to work regularly under rooftop.
• Able to use Microsoft suite of Software including project.
• Prociency in AutoCAD is preferred.
• Good organizational skills and communication skills. Good technical competency.
• Carry out the electrical cabling works, tray & trunking works with installation.
• Experience in integration of the sites.
• Minimum Certicate requirement in Safety Supervisor.
• Candidates with a Diploma in Electrical and Electronics Engineering or above Minimum 10 years working experience on related sites

Responsibilities:

• Assist Senior Contracts Manager in tender/contract review and finalizing the tender sum.
• Help with contract administration, progress claims, and liaise with the Client's representative on claims and variation costs.
• Compile subcontractor quotes for review and approval.
• Keep Contract Manager updated on all contractual and site matters.
• Review and verify subcontractor/supplier claims and prepare payment certificates for approval.
• Prepare final accounts and variation submissions.
• Maintain quality systems in the Contracts Department.

Requirements:

• Minimum Diploma in Quantity Surveying or equivalents.
• At least 5 years of working experience related field.
• Preferably experienced in pipe jacking works and tunnelling projects.

______________________________________________________

HOW TO APPLY :

Interested candidates, please submit your resume by clicking on “Quick Apply” or contact [email protected] for more details.

Please provide following information in the resume for immediate processing

1) Reasons for leaving current and/or last employment

2) Last drawn and/or current salary

3) Expected salary

4) Date of availability and/or Notice Period

All applications will be treated in strictest confidence and only shortlisted candidates will be notified

Wee Wai Dan

EA License No : 03C5391

EA Reg No : R22109628