Job Requirement

• Perform routine inspections, maintenance, and repairs on compressors and related equipment.
• Diagnose and troubleshoot mechanical and electrical issues with compressors.
• Replace or repair defective components and parts as needed.
• Ensure all work complies with safety regulations and company standards.
• Maintain accurate records of service and repair activities.
• Provide technical support and advice to clients regarding compressor operation and maintenance.
• Respond to service calls and emergencies promptly.

Qualifications

• Proven experience as a Service Technician
• Possess Class 3 Driving license
• Strong knowledge of compressor systems and components.
• Proficiency in troubleshooting and repairing mechanical and electrical issues.
• Familiarity with safety regulations and best practices.

HOW TO APPLY:

Interested applicants, kindly send your resume in MS WORD format to leo.tang(at)trustrecruit.com.sg

We regret only shortlisted candidates will be notified.

Important Note: Trust Recruit Pte Ltd is committed to safeguarding your personal data in accordance with the Personal Data Protection Act (PDPA).

Please read our privacy statement on our corporate website www.trustrecruit.com.sg.

Trust Recruit Pte Ltd

EA License No: 19C9950

EA Personnel: Tang For Farn (Leo)

EA Personnel Reg No: R24121981

Loading and unloading of material from the truck.

Perform daily routine checks and maintain the general cleanliness.

Conduct daily checks to ensure that the vehicle is in a good and safe condition.

Driving in a safe manner at all times and adhering to traffic rules & regulations stated in the Road Traffic.

Min 3 years of experience

Loading and unloading of material from the truck.

Perform daily routine checks and maintain the general cleanliness.

Conduct daily checks to ensure that the vehicle is in a good and safe condition.

Driving in a safe manner at all times and adhering to traffic rules & regulations stated in the Road Traffic.

Min 3 years of experience

Loading and unloading of material from the truck.

Perform daily routine checks and maintain the general cleanliness.

Conduct daily checks to ensure that the vehicle is in a good and safe condition.

Driving in a safe manner at all times and adhering to traffic rules & regulations stated in the Road Traffic.

Min 3 years of experience

Loading and unloading of material from the truck.

Perform daily routine checks and maintain the general cleanliness.

Conduct daily checks to ensure that the vehicle is in a good and safe condition.

Driving in a safe manner at all times and adhering to traffic rules & regulations stated in the Road Traffic.

Min 3 years of experience

Job Description

• Co-ordination and supervision of M&E works
• Liaise with M&E Consultants
• Ascertain and make provision for all M&E and building services in collaboration with the project staff
• Monitor progress, quality of workmanship and compliance with authority requirements.
• Highlight and advise the project staff on the interfacing of M&E services and the building works
• Coordination with multiple parties not limiting to design consultants / engineers, clients’ project representatives, statutory / authority agencies etc. for the establishment of the design deliverables requirements for submission
• Review design deliverables together with the design consultants / engineers and ensure that it is in order for submission
• Attend to technical clarifications as and when required to address technical issues and establish method statements
• Project Management and sites supervision works.
• Able to coordinate with contractors and consultants for engineering issues and drawing plans.
• Perform all duties in accordance with company policies, processes, systems and procedures.

Job Requirements:

• Minimum 8 years of engineering experience with recognised Degree in relevant field
• At least 5 years of supervision experience of E&M work in the construction site for projects of similar scale, complexity and nature of work
• Candidate must have LTA/ MRT/ rail projects background

Job Description & Requirements

• Monitor and manage day-to-day operations of projects, or function, including developing and monitoring budgets, coordinating activities with other sub-contractors
• Plan the work schedule and efficiently organize the site facilities in order to meet an agreed program of deadlines
• Liaise with consultants and/or sub-contractors engaged on the project
• Attend regular meetings with owner/client/contractors/sub-contractors and ensure the progress is on schedule
• Resolve any unexpected technical difficulties and other problems that may arise
• Monitor and ensure subcontractors comply with specified requirements
• ldentify and comply with all applicable statutory regulatory requirements related to project
• Identify possible risks to project and stakeholders as well as create contingency plans to mitigate these risks
• Respond swiftly to work delays, emergencies and other problems
• Clear communication to external parties including client, subcontractors, consultants, vendors etc. on project needs, requirements and schedule by means of daily construction oversight
• Review all method statement of the activities ensuring safe execution and maximization of resources used for job efficient
• Prepare monthly site report updating the latest progress and planning to achieve the project milestone
• Complete task as assigned by Project Manager and Project Director

Requirement:

• Candidate must possess at least Bachelor's Degree in Civil Engineering
• At least 12 years of engineering experience in the related field is required for this position
• At least 5 years of experience in managing civil and infrastructure construction work for projects of similar scale, complexity and nature of work
• Work as Team leader, leading team on project requirements and target achievement
• Acting as rigorous preson on Identify possible risks in project

Job Description:

• Manage and prepare the measurements and cost estimates for the construction projects from initial calculations to the final accounts.
• Prepare tender and contract documents, including bills of quantities.
• Evaluate tenders from contractors and subcontractors and, where appropriate, negotiate with the contractors.
• Prepare contract documents in accordance to the regulations.
• Prepare cost analysis and monitor project overruns to ensure the objectives of the project is achieved.
• Access payment and variation works to client and subcontractors to facilitate the smooth workflow process.
• Communicate with the client, management, sub-contractors and keeps track of the progression of both main contract and sub-contract.
• Monitor and keep track of project progress and are responsible for the measurement and valuation of variations in the work during the contract, for agreement of interim payments and the final account.
• Perform all duties in accordance with CCCC policies, processes, systems and procedures.
• Any other adhoc tasks assigned by superior.

Job Requirements:

• Bachelor's Degree in Quantity Survey or equivalent.
• More than 4 years of working experience in the related field is required for this position.
• Acquired with both civils and architectural knowledges is preferable.
• Good communication and negotiation skills.
• Experience in LTA project, or similar scale, complexity and nature of work will be advantages.
• 5.5days work week

Job Description

• Reports Construction Manager
• To assist in site supervision works
• Coordinate internally with inter-department and externally with clients & consultants
• Coordinating for the project planning, documentation and execution of works on site
• Coordination, supervision & monitoring the progress of the project works on site, manpower mobilization, materials planning & ordering
• Coordinate with the contractor, suppliers on all project implementation issues and attend site meetings when required
• Coordinate for all submission
• Produce weekly site progress report and necessary submission
• Attend meetings, conduct site inspection on work progress to ensure quality control in accordance to meet authority requirements.
• To take on PE Assignee Supervision Role

Job Requirement

• Degree in Civil Engineering or equivalent
• Independent with good communication skill
• Good organizational and planning skills
• Effective communication and coordination skills and team work
• Able to work independently and in a team
• Able to start immediately or within a short notice period will have added advantage
• RE Registration with IES of Singapore

Responsibilities

• Develop technical designs of roadworks and highways, traffic diversion schemes and delivery models according to different standards and requirements.
• Planning and supervising projects.
• Responsible for temporary traffic diversion scheme to suit construction progress.
• Coordination with relevant authorities for purpose of obtaining information and approvals.
• Preparation of Traffic Management Plan (TMP) for construction project.
• Preparation of tender documents and proposals.
• Preparation of Traffic Management Plan for road widening and viaduct construction project.
• Stakeholder management & liaising with different authorities.

Requirements

• Preferably with a Degree in Traffic Engineering and above or equivalent.
• Min 10 years experience in construction industry .
• Able to work as a team, assertive, independent, and proactive.

Job Benefits:

• 5.5 days work week, 8am to 5pm
• Saturday, 8am to 12pm
• AWS and Variable Bonus

Job description:

• Supervise drivers and delivery assistants, ensuring their tasks are effectively managed and monitored.
• Address safety violations or disciplinary issues by reporting them to the Operation Manager.
• Plan, schedule, organize, and assign daily jobs while adhering to safety protocols.
• Liaise with customers to address and resolve job-related issues, including time extensions for export collections when necessary.
• Report cargo damage, traffic accidents, delivery abnormalities, or discrepancies to the Operation Manager or immediate superior.
• Investigate and document incidents/accidents promptly, submitting detailed reports (e.g., Incident Report/CAPA) to management.
• Oversee vehicle and equipment usage, ensure proper maintenance scheduling, and confirm all assets are in good condition.

Please submit your updated resume by using the APPLY NOW BUTTON

By submitting your personal data and/or resume to us in connection with your job application, you will be deemed to have agreed and consented to us in collecting, using, retaining, and disclosing your personal data and/or resume to prospective employers for the purpose of the evaluating, processing and administration by company relating to this job application.

*We regret to inform that only shortlisted candidates would be notified*
We wish you all the best in your career search.

You are welcome to visit our website at www.rkgroup.sg

RK Recruitment Pte Ltd | EA License No.: 20C0280

Raymond Ng Jun Han | EA Personnel No.: R1657009

• Provides project management for ongoing client sample programs through daily customer communication and contact. 
• Provides sample registration though the laboratory LIMS system and ensures correct registration
• Arranges all aspects of local and international logistics for both sample collections and overseas shipments to global partners.
• Performs data entry into eLIMS, CRM and other databases, as appropriate
• Be an internal liaison for clients so they only need to contact one person.
• Empowered to make decisions on behalf of clients to provide superior service.
• Provides information for clients (e.g. Pricing, Capabilities, Status, Sample Submission)
• Onboards new clients by asking appropriate questions and provides on line sample registration training
• Submits and coordinates client requests for re-testing, additional testing, OOS investigations and changes that are needed.
• Communicates and coordinates timely resolutions to customer complaints.
• Provides support for other Client Service Associates and Sample Management team when needed (e.g. absence, workload adjustment, site and regional balancing)
• Coordinates conference calls with client and Eurofins sites as needed.
• Monitors KPI’s for key customers assigned, including TAT performance metrics and Interco sales.
• Contributes to assigned process improvement projects and supports implementation when needed.
• Performs ad-hoc duties as assigned.

The candidate will lead the APJ regional benefits team. This role is responsible for executing the Global Benefits and Wellbeing strategy, offering regional insights, shaping global policies, and driving efficiency through AI and platform improvements.

The candidate will collaborate cross-functionally to ensure compliant benefit delivery, oversee local broker relationships, manage regional budget planning and execution, and support mergers and acquisitions. Additionally, they will lead a small team, foster their development, and work closely with the APJ People Leadership Team on strategic priorities and executive escalations.

What You’ll Be Doing:

• Lead the execution of the Global Benefits and Wellbeing strategy across the APJ region
• Provide the Global Benefits Leadership Team with regional insights and help shape global policies while maintaining local relevance
• Drive efficiency improvements using AI and platform tools to enhance employee experience
• Partner with the Care and People Product Team to deliver a seamless end-to-end employee experience
• Collaborate with cross-functional teams, including Compensation, FP&A, and Legal, to ensure compliance and smooth benefit delivery
• Support corporate development teams with due diligence and integration during mergers and acquisitions
• Manage broker relationships at the regional level and oversee the regional budget planning and execution process
• Foster team development by providing hands-on learning and career growth opportunities to direct reports, guiding them on benefit design, policies, and onboarding
• Handle stakeholder management in collaboration with the APJ People Leadership Team and manage executive escalations
• Execute with agility, adapting to shifting priorities to meet employee and business needs effectively

. QAQC Inspector (Fabrication /Welding)

Responsibilities:

• Preparing or establishing that a welding procedure is available, has been approved as

required by the appropriate authority and is being employed in production.

• Witnessing of welder and procedure approval tests that including of the preparation of test

pieces and destructive tests and verifying compliance with appropriate standards and

specifications.

• Verification that adequate and valid welder approvals are available, and that only approved

welders as required are used in production.

• Interpretation of weld drawings and weld symbols.

• Performing of visual inspection and ensure that all finished goods are checked and approved

prior to any delivery of handover.

• Verification that post weld heat treatment has been conducted in accordance with

specification requirements.

• Appreciation of the factors influencing the formation of weld defects and their acceptability

in relation to the written specification.

• Coordination with QC Inspector (Hull/Structure and Piping) and NDT Coordinator, to verify

and ensure that all finished welds are checked and approved prior to any delivery of

handover.

• Ensure that quality assurance standards and procedures are maintained.

• Ensure that reports that are required are completed accordingly to the project

specifications.

• Liaise with Contractor, Production and Client’s representative to ensure the product is

checked and complied with the project quality plan and specifications.

• Perform any other tasks as may be assigned by the supervisor.

• Ensure compliance to relevant government regulations and company’s quality, safety, health

and environmental (QSHE) policies, practices and procedures at all times.

Requirements:

• Minimum Diploma in Engineering or relevant field of International certification (e.g. AWSCWI or CSWIP 3.1 WI).

• Physically fit since some of tasks require lifting of some equipment.

• A team player with the ability to work independently as well as in a team

• Good communication skills, meticulous, resourceful, able to multi-task

• Computer literary (MS. Office).

Responsibilities and Duties:

1. Oversee daily sales operations for semiconductor manufacturing equipment, such as CMP tools, within the assigned sales territory to ensure achievement of sales targets set by the management team.
2. Guide and manage the sales representatives’ activities to maximize market opportunities and maintain competitiveness.
3. Regularly prepare forecasts and sales targets, monitoring team performance against these benchmarks. Provide strategic direction to help the team meet or exceed these goals.
4. Lead new marketing initiatives and collaborate with EC to implement promotional efforts for semiconductor manufacturing equipment products.
5. Design, develop, and execute localized sales and marketing programs tailored to the needs of the sales territory.
6. Maintain clear communication with the sales team to understand customer needs and provide sales support as required.
7. Collaborate with EC to establish appropriate industry pricing levels.
8. Utilize the SAP ERP system to track and manage the progress of quotations, purchase orders, deliveries, and customer invoicing.
9. Partner with EC to identify and secure new accounts and contracts, leveraging the local team to support growth in new product offerings.
10. Build and maintain strong customer relationships to ensure trust and satisfaction.
11. Perform any additional responsibilities as assigned by the management team.

Qualifications and Requirements:

Experience:

• A minimum of 5 years of sales experience, preferably within the semiconductor industry and in a Japanese company setting.

Knowledge:

1. Familiarity with commercial and shipping documents, including Incoterms.
2. Understanding of semiconductor manufacturing equipment, such as CMP tools.

Skills:

• Strong interpersonal and communication skills, complemented by a friendly and professional demeanor.
• Demonstrated ability in customer service, negotiation, and delivering impactful presentations.
• Capability to work effectively both independently and collaboratively within a team environment.

Other Requirements:

• Willingness to travel internationally for training and visits to customer locations across the region as needed.
• Candidates who own a vehicle will receive a vehicle allowance.

EA License Number: 22C1267

EA Personnel: R22110252

JOB DESCRIPTION

• Plan and co-ordinate on the project progress and schedule and ensure timely completion
• Attend project meeting and prepare report for project progress update
• Prepare project budget and cost estimation
• Coordinate and plan to achieve project milestones, project deliverables and schedule monitoring
• Manage, control and monitor all project activities such as engineering design, site execution, testing and commissioning of project
• Prepare / review as built iso for claim purpose, follow up with client for any outstanding DO issue
• To prepare progress claim report and submit progress claim documents according to client requirement
• To prepare operations and maintenance manual after project completion
• To coordinate with inter-departments for operations matters (procurement, engineering, group office)

Competency Requirements

• Diploma or Degree in Mechanical Engineering
• At least 3 years of working experience in the related field
• Familiarity with semi-conductor/construction industry
• Proficient in Microsoft Office
• Knowledge of QA/QC procedure (PQR/WPS) will be an added advantage
• Multi-tasking team player with excellent interpersonal and communications skills
• Attended QEHS related awareness training

Job Responsbilities

• Prepare of tender activities
• Perform process design and costing (CAPEX & OPEX)
• Perform technical proposal c/w PFD, P &ID
• Tender clarification & presentation (supporting sales activities)
• Assisting project team on technical matters (process design & calculation and sequence of operation)
• Assist to source new product technical evaluation

Job Qualifications

• Degree in Chemical/Mechanical/ Electrical Engineering
• Technical knowledge (i.e. Process Design and calculation) in membrane (MF/UF/RO/MBR), Ion Exchange (2B3T, MB, CPU, EDI) and pretreatment processes (coagulation/ flocculation, sedimentation, clarification, filtration)
• Relevant project management / plant testing & comissioning experience will be an added advantage
• Self-starter, highly motivated, driven by excellence and having an eye for details

• Troubleshooting and resolving any problems with business application software.
• Creating and overseeing protocols and procedures for the use of any new software applications.
• Training employees on the use of any new software applications and maintaining a good work atmosphere.
• Managing local area networks, installing and maintaining routers, generating email addresses, and creating passwords and backups
• Develop solutions following defined standards and high quality
• Creating, executing, and maintaining company database

Responsibilies:

- Familiar with documents submission to relevant government authorities

- Responsible for measuring quantities and taking off

- Prepare Variation Orders, monthly Progress Claims, final claims

- Prepare and submit Material submission form to client for approval

- Attend site meeting when necessary

- Prepare Tender and contract documents, including bills of quantities with the architect and/ or client

- Perform risk, value management and cost control

- Prepare and analyze costings for tender

- Allocate work to subcontractors

- Provide advice on contractual claims

- Understand the implications of health and safety regulations

- Identify, analyze and develop responses to commercial risks

- Undertake cost analysis for repair and maintenance project work

- All other QS related job

Qualifications:

- Diploma/ Degree in Constructions Building or its equivalent

- Ability in contract negotiation, contract administration and variations orders

- Able to work independently, analytical with excellent problem solving skills, proactive.

- Knowledge of AutoCAD, MS Excel, MS Word

- Possess knowledge in Cubi cost software OR any other relevant software will be an added advantage

- Possess minimum Diploma/Degree in Quantity Surveying / Electrical / Mechanical or its equivalent with 1- 2 years of relevant experience

- Able to start in a short notice period

With the following information in your resume

• Current and Expected salary
• Reason for leaving
• Date of availability
• Education
• Work experiences and job responsibilities background

We regret that only shortlisted candidates will be contacted

· Cleaning and sanitizing work areas, changing treatment room sheets, and sterilizing all instruments and equipment before each use.

· Explaining massages, treatments, and therapies to guests and providing suitable recommendations as needed.

A

· Performing different types of massages, beauty treatments, and wellness therapies.

· Maintaining detailed records of massages, treatments, and therapies performed on each spa guest.

· Communicating with guests during massages to adjust massage techniques as required.

· Resolving guest complaints and reporting any accidents to the supervisor.

· Cleaning and sanitizing work areas, changing treatment room sheets, and sterilizing all instruments and equipment before each use.

· Explaining massages, treatments, and therapies to guests and providing suitable recommendations as needed.

· Ensuring that the spa is adequately stocked with spa supplies and reporting shortages to the supervisor.

· Enquiring about guests' medical conditions and allergies before providing spa services.

· Able to work at the weekend and public holiday

· Full-Time/Permanent Position.

· Candidate must possess at least a Primary/Secondary School/"N" or "O" Level, Professional Certificate such as CIDESCO / CIBTAC / ITEC / NITEC in beauty and wellness or relevant certifications.

· Minimum 3 years of working as Beautician / Facial and body therapist is an established spa.

· Fluent in English and Mandarin (in order to liaise with the Mandarin speaking patients).

· Well-groomed and pleasant personality.

· Good service-oriented approach and initiative.

· Willing to work on weekends and public holidays

· Able to start work at short notice

• Troubleshooting and resolving any problems with business application software.
• Creating and overseeing protocols and procedures for the use of any new software applications.
• Training employees on the use of any new software applications and maintaining a good work atmosphere.
• Managing local area networks, installing and maintaining routers, generating email addresses, and creating passwords and backups
• Develop solutions following defined standards and high quality
• Creating, executing, and maintaining company database

• Troubleshooting and resolving any problems with business application software.
• Creating and overseeing protocols and procedures for the use of any new software applications.
• Training employees on the use of any new software applications and maintaining a good work atmosphere.
• Managing local area networks, installing and maintaining routers, generating email addresses, and creating passwords and backups
• Develop solutions following defined standards and high quality
• Creating, executing, and maintaining company database

Highlight

• Annual Leave/Medical/Bonus
• 5-days work week
• On-job training will be provided
• Salary negotiable

Full time

$2,600 – $3,000 per month

Responsibilities:

• Provide administrative support.
• Handle enquiries and respond to customer's feedback in a professional manner
• Handling import/export documentations, custom declaration & Trade net operations
• General shipping functions including data entries
• Preparation of B/L, manifest and invoices
• Coordinate incoming & outgoing shipments with subordinates, suppliers, freight forwarders & customers
• Prepare customer billing (Scan POD, Prepare Purchase Order, Invoices)
• Arrange transport for cargo delivery
• Other ad-hoc duties

Requirements:

• Proficient in Microsoft Office Suite.
• Strong analytical and problem-solving skills.
• Excellent attention to detail and accuracy.
• Effective communication and interpersonal skills.
• Ability to work collaboratively in a team-oriented environment.
• At least 2 year(s) of working experience in the related field is required for this position.
• Preferably Junior Executives specializing in Logistics/Supply Chain, Clerical/Administrative Support or equivalent.
• On Job training will be provided
• 5 days works

Job Description:

Full time

Loading and sorting of logistics items.

Deliver items island wide in singapore.

Ability to lift and carry heavy items

Maintain a high level of hygiene and cleanliness of delivery vehicle.

Packing and sorting of materials.

Stuffing and unstuffing of container.

Job Requirements:

Possess Class 3 (manual license ) working experience

Able to work weekends and public holidays.

Healthy and fit physically.

Working days: 5.5 days per week

Summary of role requirements:

• 1 year of relevant work experience required for this role
• Working rights required for this role
• Expected salary: $2,600 - $3200 per month (depending on experience)
• Yearly bonus, overtime paid

Email to: [email protected]

Thank you for your interest in this position. Our shortlisting period is 3 working days. Only shortlisted candidates will be contacted for further consideration.

If you do not receive communication from us within this timeframe, it's likely that your application has not been shortlisted by our client. In such cases, we recommend that you continue your job search to maximize your opportunities. We wish you all the best and should we have any suitable roles that match your experiences/ qualifications/ preferences, we will reach out to you.

Information:

• Office Location: West
• Site Location: Island depends on project
• Job Types: Full Time
• Timing/Shifts: 5 Day Week

MCI Career Services Pte Ltd is a leading recruitment agency in Singapore, dedicated to connecting talented individuals with exceptional career opportunities. We are currently looking for a friendly, proactive, and highly motivated Operations Executive and Manager to join our dynamic team immediately.

Job Description:

• Manage project requirements, ensuring smooth execution and timely delivery.
• Oversee daily operations, meeting targets and lead time in a fast-paced environment.
• Liaise with customers and internal stakeholders, addressing project-related matters.
• Deploy staff as per client needs, conducting site visits for compliance and troubleshooting.
• Manage activities, and work schedules, and consolidate staff payroll accurately.
• Provide product training to enhance staff skills and knowledge.

Requirements:

• Diploma with 3 years of logistics or warehouse operations experience.
• Adaptability to fast-paced operations.
• Strong organizational and communication skills.
• Ability to work overtime as needed

By submitting your personal data and/or resume, you give consent to the collection, use, and disclosure of your personal data and/or resume by the company (or its agent) for the processing and administration by the company relating to this job application.

*We regret to inform you that only shortlisted candidates will be notified