• To assist the appointed Project Manager in managing the project inclusive of cost planning, consultant and contractor procurement, design management, construction management until project completion and handover.
• On-site coordination of activities of the appointed project consultants in alignment with the project schedule and budget.
• Engage with project stakeholders (internal to the client) and external (e.g., industrial estates, authorities, and providers) in connection with the project.
• Manage and oversight all project procurement and coordination activities including, but not limited to the procurement of early works and main contractors, critical equipment and other specialist suppliers.
• Aiding appointed Project Manager in administering appointed contracts and undertake all necessary interfacing and reporting with the contractors during the post-contract phase.
• Ensure compliance to the T&T Commission Execution Plan (“CEP”) online system, risk management and business management system frameworks.
• To maintain effective project governance, processes and systems to be utilised throughout project.
• To manage the implementation of the master programme, manpower, materials & plant schedules.
• Responsible for the project planning, including producing the detailed project plan.
• To lead and facilitate the overall cross-functional project team.
• To prepare master programme, formal project progress and other reports.
• To take a leading role in interfacing with the client and other consultants, at all project stages.
• Control and properly compile all relevant documents for the project including uploading to T&T sharepoint.
• Any other work-related tasks or duties deemed required and assigned by the management / line manager.

The Guest Services Executive is to perform various aspects of the front office operations and demonstrates high level of service throughout the entire guest journey. To ensure that service quality aligned to brand standards and LQA guidelines. He/she will ensure ALL loyalty Program benefits are observed and enrol new loyalty members as required.

Primary Responsibilities

• Welcomes all guests, promotes inter-hotel sales and in-house facilities, and provides directions and

suggestions to the hotel surrounding areas

• Assist guests with check-in and check out

• Confirms mode of payment; performs pre-authorization on credit card or collects required deposit for cash

payment

• Manage and assist guests with any enquiry that may arise

• Process all guests check out by confirming invoice balance, payment mode and feedback on stay

The Guest Experience Executive is responsible for the daily operations of the Executive Club Lounge, ensures that the highest level of hospitality, delivering F&B services, Concierge services and creating an experience throughout guest stay.

Primary Responsibilities

Manages the guest journey from pre-arrival to post-departure

• Supervise and direct the team of Guest Experience Executive to ensure that personalized care is provided to all hotel guests at Heart of House throughout their stay.
• Manages the Pullman Singapore Orchard guest experience through a seamless flow of processes.
• Upholds a flawless impression and perception of Pullman Singapore Orchard services, products, and colleagues.
• Accommodates all guest needs and requests, anticipating guest needs, and creating memorable experiences through personalized service.
• Works with all departments to ensure seamless service.
• Perform other duties as assigned.

• 1. Learn and master the company's core technology and product, provide technical support for customers and distributors, including technical explanations, training, (answering questions, solving problems), etc. according to the technical process and specifications of the company
  2. Provide on-site technical support for customers specifically in Imaging, Flow Cytomtery and Clinical application in the responsible area to ensure the success rate of the Demo;
  3. Summarize product and application experience, and cooperate with the local sales team to carry out targeted technical presentations to key account, so as to enhance the core competitiveness of Miltenyi products in the customer base.
  4. Update training materials in a timely manner, and provide complete training tools for internal sales and distributors;
  5. Cooperate with the sales team to achieve sales targets and provide customers with continuous, satisfactory and timely technical support;
  6. Other affairs arranged by the company due to business needs.

Office Location : Tai Seng

Working hours : Monday to Friday | 8am to 6pm | Saturday 8am to 12pm

Salary (commensurate with experience) : Up to $5,000 + Variable Bonus + Annual Leaves + Medical Benefits

Industry : Construction Sector - A&A / Building Works

Job Description

•Check and analysis drawings, authority requirements and tender specifications

•Check site installation whether it is in accordance to design and standards

•Oversee the projects, ensure compliance of contracts and the drawings with regulatory specifications.

•Able to coordinate with owners, architects, consultants, project managers, sub-contractors and suppliers.

•Attend meetings with architects and consultants

•Other ad-hoc duties as assigned

Job Requirements: Possess at least diploma in Electrical Engineering and Mechanical Engineering (M&E) or equivalent

•However, entry level are encouraged to apply, from recognized University by Singapore PE Board as training will be provided.

•Good operational planning for construction projects

•Good in communication and written abilities

•Required skill: Able to use Microsoft Project to present schedule to the client

•Knowledge in Construction and Renovation.

•Skills required: Autocad

Maxhunt Resource Pte Ltd | EA Licence: 22C1322
Loh Wing Sheng | Registration No: R22110239

Job Description & Requirements
Responsibilities:

Tender drawings preparation (Layout, sections, and elevation)
Preparation and submission of drawings to client and follow up on approval of the drawings. (Layout, section and elevation)
Follow up with QP/client on ST/BCA submission.
Follow up with QP for approvals on drawings.
Attending design discussions with the Engineers, Managers, Client, and QP.
Reviewing Consultant’s design drawings and specification.
Supporting the Project team with technical delivery using AutoCAD.
Support installation team on Preparing working drawing for site installation
Prepare Bill of Materials/Quantity take off based on the Shop drawing/Installation drawings/Fabrication drawing.
All the drawings Prepared in time and as per the specifications and quality requirements.
Prepare As built drawings as per site installation and get Approval from client
Storing and filing the projects for future references.
Staying updated with the latest developments in the various industries.
Requirements:

Bachelor’s degree or polytechnic in Engineering or related degree.
Proven work experience in the Construction company as an AutoCAD Drafter or a similar job position.
Extensive knowledge of AutoCAD software.
Basic understanding of environmental and safety regulations.
Good knowledge of engineering principles.
Ability to work in a team environment.
Good time management skills.
A detailed oriented and creative individual.
Excellent interpersonal and mathematical skills.
Good oral and written communication skills.
Exceptional active listening skills.
Ability to meet deadlines and multitasking.
Knowledge on BIM software is added advantage

Bursar

Reporting directly to the Principal and functionally to the Chairperson, Finance Sub-Committee of the School’s Board of Governors, you will lead the school's financial management ensuring compliance with legislation, policies, and procedures in accordance with accepted accounting principles. In addition, you will play a pivotal role in shaping the institution's financial and HR frameworks, ensuring sustainability, and fostering a thriving workplace culture

Key Responsibilities

Finance and Procurement

• Lead the school’s financial management and procurement operations, including policy development, budgeting, and investments.
• Prepare and present financial reports for strategic planning and decision-making.
• Monitor and analyze financial metrics, such as student fees and payroll expenses.
• Administer grants in compliance with accountability requirements.
• Ensure all accounting systems and processes adhere to governance and internal control standards.

Human Resources

• Drive HR policies and initiatives to align with the school’s strategic direction, focusing on:
• Staff development, career progression, and succession planning.
• Performance management through effective goal setting, appraisals, and feedback.
• Recruitment processes to attract and hire top talent.
• Market remuneration reviews to maintain competitive reward structures.
• Optimize HR workflows and implement systems for improved efficiency and productivity.
• Conduct cost and productivity analyses to support HR decisions.
• Review and enhance the organizational structure to meet school objectives.

General Management

• Collaborate with school management teams in strategic finance, planning, and policy-making.

Requirements:

• Degree in Accounting/ Finance, preferably with a Master's or other relevant accounting accreditation
• At least 8 years of experience in similar capacity
• Demonstrated leadership, possessing strong analytical and strategic thinking skills are critical success factors to work at both conceptual and operational levels.

Job description

The ideal candidate should possess a good understanding of a print production job flow – from conceptualisation to production stages

Responsibilities

• Minimum of 2 years of relevant working experience
• Amendment of existing artwork
• Create compelling and effective logos, designs, print and digital media.
• Become familiarised with client’s brand guidelines and past assignments.
• Liaise with sales personnel and clients to fulfil clients’ needs and expectations.
• Maintain awareness of current industry and technology standards, social media, competitive landscape and market trends

Qualifications

• Diploma or Bachelor's degree in Graphic Design or related field
• 2-4 years of experience in graphic design & print industry
• Proficient in Adobe Creative Suite
• knowledge of print processes and specifications/profiles
• Strong communication, conceptual thinking, typography skills, design skills.
• Ability work under pressure and fast paced environment.
• Keen Interest in the printing industry and/or experience with digital presses/large format printers are an added advantage.
• Portfolio of work

Interested candidates are invited to submit a comprehensive resume / portfolio, stating expected salary and date of availability together with a recent photograph.

We regret that only shortlisted candidates will be notified.

Job Type: Full-time

Pay: $1,800.00 - $2,800.00 per month

Benefits:

• Promotion to permanent employee

Schedule:

• Monday to Friday

Supplemental Pay:

• Performance bonus

Experience:

• Graphic design: Minimum 1 year

Job Description:

• Responsible for product quality assurance.
• Completes all administrative activities associated with quality inspection.
• Performs process audits and assists manufacturing with the interpretation of the quality and workmanship standards.
• Downloads quality information from quality system to be used for Quality reports.
• Plans and directs activities concerned with the establishment and/or continuance of process related requirements and other quality programs.
• Prepares quality documentation or equivalent.
• Prepares Statistical Process Control Charts where required.
• Responsible for authorizing the released of final products to customer.
• Supervises inspectors or technicians on the inspection plan.
• Directs inspectors or technicians engaged in measuring, inspecting and/or testing products or parts and tabulating data.
• concerning materials, product or process quality and reliability.
• Contributes to the workplace safety and health improvement for the employees, as well as environmental protection, by adhering
• to the company’s Environmental, Health and Safety policies and procedures, and helping to achieve EHS objectives and targets
• through participation of EHS programs.
• Participate and adhere to Corporate Social and Environmental Responsibility (CSER) policy, programs and procedures.

Job Requirements :

• Diploma / ITC / NTC in Mechatronics/ Electrical & Electronics engineering or related discipline, preferably with 2 years in manufacturing environment.
• Proficiency in written and communication skills in English.
• Practical computer skills and knowledge with hands-on ability.
• Familiarity with inspection equipment, statistical tools, Geometric Dimension and Tolerance knowledge will be an advantage
• Able to use microscope for inspection and verification.

Responsibilities:

• To develop 3D CAD models and draw 2D detail design drawings, shop drawings and as-built drawings to relevant drawing standards
• To assist in coordinating all M&E services drawings related to structural, architectural, landscape and interior design
• Prepare drawings independently and review own work prior submissions
• Update and maintain current drawings / documentation
• Discuss ideas or issues to team verbally and written

Requirements:

• Minimum Engineering Diploma or equivalent
• Mechanical or Electrical Engineering background
• Proficient in 2D & 3D AUTOCAD and other desirable software skills (Autocad Revit, BIM)
• Familiar with local building codes
• Familiar with local submission procedures
• Exposure to ISO / drafting standards
• Be independent, self-motivated, able to work under pressure and deliver timely
• Perform as a good team player

Interested candidates please submit updated resume via “APPLY NOW”.

Job Description and Responsibilities :

• Develop ideas for our company sosial media and webside.

• Work closely with the teams to ensure alignment of design to client's requirements.

• Ensure that all design work is completed to the highest standard.

• Strong technical knowledge.

Requirements:

• Knowledge of software :3D Max/sketch-up, Auto-Cad, Photoshop, Illustrator.

• To supervise the work of sub-contractors and work closely with other operations staff to meet the project schedule
• Report to the Construction Manager
• You will adhere to construction procedures and safe work practices and ensure that works are executed within an acceptable standard of workmanship so as to meet the stringent requirement conducted during site tests and inspections
• Prepared and Assembled ready wooden cabinetry to drawings and specifications for installation.
• Verified dimensions and checked the quality and fit of pieces.
• Measured and marked dimensions of sites.
• Performed Cabinet assembly with the use of hand tools.
• Assisted with all aspects of the assembly team.
• Read detailed schematics for cabinets and executed assembly accurately.
• Helped with delivering and manually installing cabinets.
• Installed cabinets in residential homes.
• Minimum 3 years of relevant experience in the Construction Industry
• Possess a certificate in Building Construction Safety Supervisor (BCSS)
• Supervisory experience in foundation & structural works on site
• Able to work independently with a positive attitude

Why Join Us?

• Basic Salary $3000-3500
• GUARANTEE Minimum Salary $10,000 (保证最低薪金 $10,000)
• 13th Month Annual Bonus
• Yearly Salary Increment
• Clinic linked to MRT Station
• Annual leave 14 days
• Detailed Training Provided
• Exclusive Staff Discounts on our aesthetic treatments
• Opportunity to embark on Branch Manager Grooming Program
• All are welcome to apply!

Job Scope

• Work together with team members to achieve sales target
• Promoting company services and products to customers
• Exposure to a diverse range of aesthetic treatments for face, body, skin
• Provide high standards of customer service
• Recommend services and treatments to patients based on their needs and doctors recommendation
• Follow up with patients on their treatments and progress

Requirement:

• Experience in Aesthetics / Beauty or related industries
• Service-oriented with self-motivation for achieving sales target
• Team player with excellent interpersonal communication skills

Contact Details

More details can contact/Whatsapp +65 88760034 or email [email protected]

Job Description

a) To report to the Manager or team leader as shown in the organization chart. He/she is responsible for the assigned or related project tasks and responsibilities.

b) The detailed duties and responsibilities include but not limited to the following:

• Study and fully understand the ISO requirements, technical drawings, scope, contractual requirements and sub-contract agreements. Work with the consultants to resolve technical issues prior to construction.
• Submit to superior for feedback and concurrence on short or medium-term programmes and execute the works according to the detailed programme.
• Ensure that the works are carried out according to the approved drawings, quality procedures and EHS requirements. Managing the works with excellent housekeeping is a key focus.
• For quality management, the engineer is responsible to fully implement with the quality recordings, carry out result analysis and formulate action plans for continuous improvement.
• Implement and maintain proper recordings to comply with EHS, quality, client and authorities’ requirements.
• Responsible for cost management so that the materials used for both temporary works and permanent works are not damaged or control the wastage within specified tolerance. Rework or abortive work which has serious time and cost impacts shall be avoided.
• Ad-hoc matters as assigned by the PM which is necessary for the execution of the project.

Job Requirements

• Diploma/Bachelor's degree in Civil & Structural Engineering
• Mininum 2 - 5 years' experience working in construction industry
• Preferably with HDB experience

Job Description

a) Report to the Manager/Team leader as shown in the organization chart. Responsible for the coordination and control of technical matters, quality implementation and site supervision works.

b) The detailed duties and responsibilities includes but not limited to the following:

• Coordinate with all the parties including sub-contractors and consultants to solve and coordinate technical issues.
• Production and maintaining of drawings from BIM (Revit) model and ensure proper transmission of data to all parties involved.
• Ensure that the detailed schedules of drawing production and site progress are met.
• For quality management, the coordinator is responsible to fully implement with the quality recordings, carry out result analysis and formulate action plans for continuous improvement.
• Transform AutoCAD drawings into 3D drawings.
• Ensure BIM standards and Level of Development (LOD) are followed.
• Supervise site works according to the quality and EHS requirements.
• Handle all inspections and handing over process with the final objective of achieving customer satisfaction and high Conquas/QM score.
• Ad-hoc matters as assigned by the PM which is necessary for the execution of the project.

Job Requirements

• Degree in Architecture / Engineering
• Minimum 2-3 years' experience in BIM Drafting (Architectural or M&E)

Job Description:

• Perform HR functions including Payroll, Employee data maintenance, Training administration and day to day HR process.

• Process Monthly payroll for employees using Opensoft for approximately 150 headcounts

• Leave administration for e-Leave portal

• Generate monthly payroll reports and handle payroll related enquiries

• Responsible for Work pass applications, renewals and cancellations

• Prepare and draft Letter of Appointment, Letter of Confirmation and other employment related contracts

• Timely submission of CPF contribution, IR21 and yearly income tax filing

• Submission of government-paid claims such as Training Grants, NS claims, Maternity Leave, Childcare Leave and other government related claims

• Handle MOM Surveys, apply WP, S Pass

• Maintaining personnel files and keep HR related information updated

• Involve in the implementation of new HR initiatives, projects and policies

• Assist in the reviewing of Employee Handbook annually

• And other ad-hoc duties as assigned.

Requirement

• Minimum Diploma in Human Resource Management and Business Management or related field

• At least 5 years of relevant working experience

• Worked in Food & Beverage (F&B) industry will be an added advantage

• Knowledge of Singapore Employment Act

• Able to maintain close and effective personal working relationships at all levels of the organization

• Ability to work independently with little supervision, resourceful, meticulous and organized

• Good team player with interest to learn

• Proficient in Microsoft Words / Excel / Power Point

• Knowledge of Opensoft Payroll will be an added advantage.

Job Description

Main Responsibilities

–Report to the Operations Manager

– Check the schedule on a regular basis for arrival times and changes in them

– Gather and transport all supplies needed for the set up of a function including but not limited, silver, china, linen, skirts, glassware, condiments etc.

– Set up buffet tables according to One Paradise and function requirements with a creative flair.

– Properly set all tables, side stations and the back of the house areas for functions according to service standards

– Report any incident to immediate superior and followed up with the events report

– Assist in the placement of any food items in a function room for a display or a buffet and the ability to serve from buffet line

– Serve, prepare the proper mise-en-place for any function

– Serve all food and beverage function according to the standards set forth by One Paradise

– Attentive to the needs of all the guests in the function room providing them with dependable, punctual and enthusiastic service

– Ensure all tables and the function room is clean and neat prior to leaving for the shift

– Ensure all food and beverage items to return the kitchen or to the Supervisor of the Function

– Ensure all condiments including salt, pepper, sugar, flowers, skirts, and candelabra go back to store

– Service all functions including plated, buffet, silver- served or VIP meals, coffee breaks, benefits, theme parties, weddings, receptions, outside catering etc.

– Respond properly in any emergency or safety situation.

– Adhere to company’s standard operating procedures

– Any other appropriate duties and responsibilities as assigned

Requirements

– Good communication skills

– Minimum of 1 year experience in banquet service

– Pleasant personality and jovial

– Possess a good sense of responsibility and commitment

About the role

As a Sales Executive (Pre-owned Cars) at MOTOR-EAST PTE LTD, you will be responsible for driving sales of our pre-owned vehicle inventory. This full-time role is based in our Toa Payoh West Central Region showroom, where you will engage with customers, understand their needs, and match them with the perfect pre-owned car to meet their requirements.

Description of Duties:
• Engage with customers honestly and professionally to build trust and lasting relationship.
• Drive sales for our range of pre-owned vehicles, wide variety of cars ranging from Japanese to Continental makes.
• Deliver exceptional service to customers, ensuring a seamless experience from initial inquiry through to post-sale support.
• Stay informed on vehicle specs, features, and performance to provide well-informed guidance.
• Manage the entire sales process, including test drives and coordinating financing options.
• Keep up to date with industry developments and competitor offerings to better position our vehicles.
• Address customer inquiries professionally and resolve feedback promptly.
• Engage with customers honestly and professionally to build trust and lasting relationship

Requirements:
• Valid Class 3/3A license with a minimum of 2 years of driving experience.
• Experience in automotive, retail sales, service, and hospitality industries preferred.
• Excellent teamwork, communication, and interpersonal skills.
• Ability to work on weekends and public holidays.

Remuneration and Benefits:
• Basic Salary + No capped commission & incentive
• Up to 21 days annual leave
• Medical and dental
• Staff discount

Join Our Team as a Part-Time Medical Sales Representative!

As a Part-Time Medical Sales Representative, your primary focus will be on building relationships with healthcare professionals and promoting our products effectively. Here’s what your job entails:

Your Role:

· Hospital Visits: Regularly visit hospitals and healthcare institutions to meet doctors, nurses, and procurement teams.

· Presentations: Schedule and conduct meetings or product demonstrations with relevant departments (e.g., orthopaedic, sports medicine and general surgery).

· Product Promotion: Introduce, explain, and showcase medical products to healthcare professionals.

What We Offer:

· Competitive Compensation: Basic $1,000–$1,200/month + commissions and incentives for achieving sales targets.

· Flexibility: Work 3–4 days per week.

· Comprehensive Training: Product knowledge and sales training for professional development.

Benefits & Perks:

· Attractive commission and incentive structure.

· Hands-on training and professional growth opportunities.

Work Environment:

· You’ll be required to travel between hospitals and healthcare facilities.

Take the next step in your career journey. Apply now to make a difference in the healthcare industry!

Only shortlisted applicants will be notified.

Responsibilities:

• Develop new accounts and manage existing customers
• Evaluating sales potential and actively follow up with customers’ requirements
• Identify customers’ needs and offer technical solutions, training & application support
• Plan, forecast and materialize sales target

Requirements:

• Degree/Diploma in Electrical / Electronic Engineering with preferably 2 years’ of sales experience in the electronics industry.
• Preferably with technical background in areas relating to electrical/electronic equipment.
• Prior experience in Renewable Energy and Battery related applications experience will be a plus.
• Proficient in computer hardware and software
• Able to learn and assimilate new technology quickly
• Dynamic, Independent and able to adapt to multi-tasking environment
• Preferably have a car
• Willing to travel

5 days week (9.00 AM - 6.00 PM)

Responsibilities

• Responsible for quantity take-off and cost estimation for quotation/tender and on-going projects with specific deadline.
• Liaise with suppliers /Sub-contractors and source for competitive quotation.
• Submission of monthly progress claim & variation order (VO).
• Evaluation of sub-contractors’ progress claim & variation order.
• Final account settlement with sub-contractors and clients.
• Contract documents administration.
• Any other ad-hoc duties as assigned by the management.

Requirements:

• At least 2 years of working experience with building construction
• Preferred experience in full QS role in A1 Main-con.
• Minimum Diploma in Civil Engineering / Building / Quantity Surveying or equivalent.
• Proficient in MS Office.
  

Technician (Heavy Vehicle)

Location: Tuas (West)

Working Hours: 5.25 Days Work Week (Mon-Fri, 8.30am to 5.30pm), Alternate Saturdays (8.30am to 12.30pm)

Remuneration Package:

• Basic Up to S$ 3,800
• AWS
• Performance Bonus
• OT Allowance Payable

Responsibilities:

• To perform all basic troubleshooting and basic diagnostics
• To carry out Service Maintenance on the trucks including
• To ensure Utilization, Efficiency and Productivity is achieved
• To record repair time and detail of repair in the Work Order
• Adhere to Warranty Process and Procedures
• Ensure good housekeeping of work bay
• Accountable for all tools and equipment handling and usage
• Ethical compliance of genuine parts replacement and service rendered according to the checklist and scope of works
• Ensure all service and repairs are performed thoroughly and in accordance to good quality practice
• Lead by example to ensure high level of Health & Safety performance within the area of responsibility.
• To attend to breakdown where necessary
• Any other duties assigned by immediate superior

Requirements:

• At least a Certificate or NITEC in Automotive Technology
• Preferably possess a valid Class 3 / 4 / 5 driving license (Singapore)
• Preferably at least 2 to 4 years of working experience in servicing and repairing heavy trucks
• Basic knowledge in vehicle Principles and Concepts
• Good knowledge in advanced engine, transmission and brake systems
• Ability to read vehicle electrical circuit diagrams

Please be notified that only shortlisted candidates will be notified.

Ian Fong | R22106545

Recruit Now Singapore Pte Ltd | EA No: 21C0845

Job Description

• Prepare meal ingredients for the Cook, which includes washing, peeling, cutting, and slicing ingredients.
• Assist in food marination.
• Washing and cleaning all utensils required in the kitchen
• Preparing cups and utensils for morning and afternoon tea.
• Blending food for special diets.
• Maintaining cleanliness in the work station and food storage facilities.

Requirements:

• Possess PSLE or higher
• Minimum of 1 year experience in the relevant field is preferred, on-the-job training will be provided.
• Comfortable to perform shift duties, 6 days work week ( 7am-3.30pm / 10.30am-7pm)
• People-orientated team player to achieve final goal
• Candidate should be able to transport loads and kitchen equipment as required.
• Candidate should be able to read basic english recipes and converse with Chinese speaking in workplace as job environment required.

Benefits:

• Leave Benefits
• Medical and Dental Coverage Benefits
• Meals provided

工作责任：

• 为修身院的居民提供膳食服务
• 主要工作范围为协助厨师准备食物如切割食物和食材
• 清洗所有餐具和所需的厨房食材
• 清洁厨房设备，维护和保持厨房环境安全、整洁、清洁和卫生
• 保持工作站和食品储存设施的清洁。

职位要求：

• 小学六年级或以上
• 具备良好的人际沟通能力和团队合作精神
• 具备良好的身体素质，以便处理厨房设备和食材。
• 能够适应轮班工作制（每周工作六天）( 7am-3.30pm / 10.30am-7pm)
• 应具备基本的英语口语、阅读和写作能力，以便满足记录和点算菜单等基本需求

福利：

• 年假、医疗保险和牙科报销福利，并且提供膳食

Interested, please kindly post your resume to [email protected] or contact at 64593492

有兴趣者请付上完整的简历并发电邮至：[email protected]

Benefits:

• Basic salary up to $7000
• Annual performance bonus
• AWS
• Location: Commonwealth
• 5 days work week

Key Responsibilities:

• Design and maintain Wintel and Linux server environments, including Windows Server (2019, 2022) and Linux distributions (RHEL, SUSE)
• Lead virtualization initiatives using industry-standard platforms (VMware vSphere, Hyper-V, or KVM)
• Design and manage Storage Area Networks (SAN/NAS)
• Implement and administer key management and encryption, Active Directory, AD Public Key Infrastructure and Network Policy Server RADIUS services
• Implement and administer monitoring solutions such as eG Innovations, PRTG, Splunk, or Kiwi Syslog server
• Implement and administer backup solutions like Veeam or Acronis
• Implement advanced system monitoring solutions to proactively identify and resolve performance and security issues
• Investigate and resolve complex technical issues related to Windows Server systems
• Coordinate with third-party vendors, IT providers, and external support for effective service delivery
• Other IT related duties

Requirements:

• Min Degree in Computer Science, IT or related field
• Min 5 years of working experience in IT infrastructure engineering with a focus on windows server administration
• In depth knowledge of Active Directory

Interested applicants, please submit your updated resume in MS Words format by using the APPLY NOW BUTTON.

By submitting your personal data and/or resume, you give consent to the collection, use, and disclosure of your personal data and/or resume by the company (or its agent) for the purpose of the processing and administration by the company relating to this job application.

Please be informed that only shortlisted candidates will be notified.

Your recruiter for this job: Stella

WhatsApp me @ 8772 4117 for a prompt response to your enquiry!

Stella Aw Yong See Hui | R24121552

Recruit Now Singapore Pte Ltd | EA No: 21C0845

- Responsible for developing, implementing and managing marketing campaigns that promote the company services

- Enhanced brand awareness within the digital space as well as driving website traffic and acquiring leads/customers

- Collaborate with internal teams to design, develop and implement digital projects

- You will be involved in planning and implementation of Business Development plans

- Supervision of confirmed Digital advertising and media-related projects

- Create and execute project work plans and revise when appropriate to meet changing needs and requirements

- Identify resources needed and assign individual responsibilities to support individuals.

- Maintain contact and regularly update client and office on progress or development of assigned projects.

- Prepare for work-in-progress reviews and quality assurance procedures.

- Be proactively involved in providing the promised solutions to ensure clients' continued patronage.

- Write materials for advertising and marketing campaigns

- Prepare copy for high-engagement social media content

- Interpret creative direction and adapt points into concepts

REQUIREMENTS

· Candidate must possess at least Advanced/Higher/Graduate
Diploma, Bachelor's Degree in Marketing, Media, Advertising, Design or equivalent.

· At least 5 year(s) of working experience in a similar capacity is required for this position
· Can converse in English well

· Contract positions available
· Interested applicants must submit a comprehensive resume
stating expected salary and date of availability to [email protected]
· Regrettably, only shortlisted candidates