Job Requirements：

1. Assist in managing day-to-day HR operations (full spectrum) related to staffing.

2. Oversee and support the recruitment process, including interviewing, onboarding, and training new employees.

3. Support the implementation of performance appraisals and assist managers in assessing employee performance.

4. Provide guidance on goal setting, development plans, and performance improvement actions.

5. Maintain records of employee performance and ensure consistency in evaluations.

6. Track employee progress post-training to ensure effectiveness.

7. Ensure HR policies and procedures are followed and aligned with current labor laws and organizational goals.

8. Monitor adherence to workplace health, safety, and legal regulations.

9. Assist in updating employee handbooks and maintaining HR documentation.

10. Prepare regular reports on staffing levels, HR metrics, etc for management.

11. Contribute to developing HR strategies aligned with the overall organizational goals.

Job Requirements：

1. Bachelor’s degree in Human Resources, Business Administration, or related field.

2. Additional HR certifications (CIPD, SHRM-CP, IHRP-CP, IHRP-SP, etc.) are a plus.

3. At least 5 years of experience in Human Resources, with a focus on staff management or employee relations.

4. Ability to mediate and resolve conflicts professionally.

5. Willingness to continuously update knowledge on HR best practices and labor law changes.

Job Description & Requirements

Review the inspection history to summarize the integrity status of the plant equipment and piping systems.

· Perform the scoping work and prepare the job pack for process piping and in-service equipment based on engineering assessment and annual inspection plan.

· Plan and carry out fixed equipment/piping inspection via on-stream risk-based monitoring programs and downtime inspection activities including corrosion under Insulation (CUI) and corrosion under pipe support (CUP) on process piping and equipment according to annual maintenance plan

· Identifying the areas of special concern and deterioration (e.g. Dead legs, injection points, mix points, corrosion under insulation and Low silicon Inspection).

· Supervision and coordination of all on-stream and shutdown inspection and NDT activities for static equipment and in-service process piping.

· Review of inspection test plan, WPS and method statement for any in-service repair work of piping and pressure vessels.

· Witnessing of PT, MPI, PMI, metallographic tube testing and Hydro static test for statutory equipment.

· Provide recommendations and timely updates on equipment degradation problems.

· Provide quality assurance on project construction and maintenance works to ensure compliance with applicable codes, standards and specifications.

· Preparation of final inspection reports with all findings, abnormalities and recommendations.

· Ensure quality of inspected items to meet project requirements and standards.

· Inservice inspections in refineries / Oil and Gas / Petrochemical industries, such as corrosion under pipe support (CUPS), corrosion under insulation (CUI), Injection & Mix points inspections.

· Read, understand project related ITP, procedures, specification requirements.

· Review documents and drawings as per specification • Knowledge / experience about Piping Isometrics, P & ID, general arrangement drawings, Structural drawings, Weld Maps, welding symbols, Cutting Plans, Quality control procedures, Base Materials, and welding consumables.

· Inspection, review of mill certificates, Material verification, Inspection of Pipes, Fittings, Flanges, valves, nipples, plate tubes as per respective materials specifications, Codes, Standards & Client Specifications. Inspection / Witness & Review Stage wise activities earlier stage of spool fabrication

· Knowledge in welding inspection

Eligibility Criteria

· Graduate Engineers with 3-6 years of relevant experience.

· Relevant Engineering Degree or Diploma in Mechanical, Petroleum/Oil/Gas, Civil, Chemical or Industrial Engineering are acceptable.

· Experience in Refinery and Oil & Gas must

· Experience in QA/QC and Knowledge in Non-Destructive Testing methods.

· Knowledge/experience in welding inspection, structural fabrication, piping Isometric drawing and piping materials.

· Work Independently and can work in Singapore and other countries.

· Fluent Reading, Speaking and Writing in English.

· Willing to commit 24 months contract/ project completion.

· Team Worker, Mature, Meticulous, Pro-Active Work Attitude & Work Independent.

· Energetic & Result Orientated.

Job Description & Requirements

· Ensure timely generation and issuance of NDT report on daily basis.

· The inspector/team lead / engineer will perform inspections applying various NDT techniques in accordance with applicable specific code, procedure, and or written criteria.

To be successful in this position, you must have the ability to demonstrate or possess:

· Minimum 3 years of experience in UT, MT, PT, ET, RT and RI.

· Must be a PCN Level 2 or ISO Level II in the above NDT methods.

· Familiar with codes and standards.

· Candidate must be flexible and responsive when call for assignments and willing to work after hours and weekends when necessary.

· Maintain a professionalism and competence at work

· Share in our purpose – to serve others, to pursue excellence, and to grow profitably,

· Employee will work as a team lead / member of local call out crews performing UT, MT, PT, ET, RT and RI.

Summary: We seek a highly motivated and skilled technician to join our growing team. You will play a crucial role in supporting the deployment of automation solutions and ensuring the successful installation of our projects regionally.

Responsibilities

1 Communicate with engineers to ensure that services are delivered effectively.

2 Handle mechanical assembly based on the provided drawings

3 Prepare electrical panels based on the provided drawings

4 Perform simple mechanical and electrical repair of installed machines

5 Support with scheduled preventive maintenance and upkeep of installed machines

6 Support with installation & commissioning of new equipment onsite

7 Support with fabrication & wiring during project execution

8 Travel to customer sites to support with service enquires whenever needed

9 Keep up to date on administrative responsibilities such as maintaining customer service logs and internal service records in a timely manner

10 Maintain in-house stock and inventory for robot maintenance

11 Performs ad-hoc duties as assigned by the manager

Requirement

1 Diploma in mechanical engineering, electrical engineering or a related field

2 Excellent hands-on skills in mechanical assembly, soldering, crimping, etc

3 Knows how to handle electrical tools like crimpers, wire strippers, ferrules, etc.

4 Must be good in handling mechanical tools such as drills, taps,

5 Basic knowledge of Linux commands will be a bonus

Job Description & Requirements

Review the inspection history to summarize the integrity status of the plant equipment and piping systems.

· Perform the scoping work and prepare the job pack for process piping and in-service equipment based on engineering assessment and annual inspection plan.

· Plan and carry out fixed equipment/piping inspection via on-stream risk-based monitoring programs and downtime inspection activities including corrosion under Insulation (CUI) and corrosion under pipe support (CUP) on process piping and equipment according to annual maintenance plan

· Identifying the areas of special concern and deterioration (e.g. Dead legs, injection points, mix points, corrosion under insulation and Low silicon Inspection).

· Supervision and coordination of all on-stream and shutdown inspection and NDT activities for static equipment and in-service process piping.

· Review of inspection test plan, WPS and method statement for any in-service repair work of piping and pressure vessels.

· Witnessing of PT, MPI, PMI, metallographic tube testing and Hydro static test for statutory equipment.

· Provide recommendations and timely updates on equipment degradation problems.

· Provide quality assurance on project construction and maintenance works to ensure compliance with applicable codes, standards and specifications.

· Preparation of final inspection reports with all findings, abnormalities and recommendations.

· Ensure quality of inspected items to meet project requirements and standards.

· Inservice inspections in refineries / Oil and Gas / Petrochemical industries, such as corrosion under pipe support (CUPS), corrosion under insulation (CUI), Injection & Mix points inspections.

· Read, understand project related ITP, procedures, specification requirements.

· Review documents and drawings as per specification • Knowledge / experience about Piping Isometrics, P & ID, general arrangement drawings, Structural drawings, Weld Maps, welding symbols, Cutting Plans, Quality control procedures, Base Materials, and welding consumables.

· Inspection, review of mill certificates, Material verification, Inspection of Pipes, Fittings, Flanges, valves, nipples, plate tubes as per respective materials specifications, Codes, Standards & Client Specifications. Inspection / Witness & Review Stage wise activities earlier stage of spool fabrication

· Knowledge in welding inspection

Eligibility Criteria

· Graduate Engineers with 3-6 years of relevant experience.

· Relevant Engineering Degree or Diploma in Mechanical, Petroleum/Oil/Gas, Civil, Chemical or Industrial Engineering are acceptable.

· Experience in Refinery and Oil & Gas must

· Experience in QA/QC and Knowledge in Non-Destructive Testing methods.

· Knowledge/experience in welding inspection, structural fabrication, piping Isometric drawing and piping materials.

· Work Independently and can work in Singapore and other countries.

· Fluent Reading, Speaking and Writing in English.

· Willing to commit 24 months contract/ project completion.

· Team Worker, Mature, Meticulous, Pro-Active Work Attitude & Work Independent.

· Energetic & Result Orientated.

Job Description

• Build and maintain relationships with relevant stakeholders in assigned countries, increasing the team's understanding of the business' operations and internal control plans
• Conduct audits of the company's financial, operational, and information systems, including social compliance audit to ensure compliance with established codes, policies and procedures
• Plan and evaluate the effectiveness and adequacy of internal controls, policies, and procedures
• Identify, analyse any potential areas of risk, control gaps, and develop a risk mitigation plan and control gap remediation recommendations to the business
• Prepare and present audit reports to the management and headquarters
• Conduct presentations and training to increase awareness of governance frameworks
• Implement new audit initiatives to maintain, develop and improve internal control, risk management and governance frameworks
• Assist with the development of policies and procedures to ensure compliance with industry standards and regulations
• Any other adhoc projects assigned

Job Requirement

• Bachelor's degree in Accounting, Finance, or relevant fields and qualifications in ACCA/CPA/CIA/CISA/CFE/CCEP
• At least 4 years of experience in internal auditing, risk management
• Have had commercial and/or Big 4 internal audit experience
• Experience in the manufacturing industry would be beneficial
• Knowledge of legal and compliance will be added advantage
• Proficient in Excel, PowerPoint, or MS Office, experienced in data analytics
• Displays qualities of a proactive and team-oriented individual
• Excellent communicator with strong presentation and influencing skills
• Willingness to travel internationally
• Knowledge of ESG (Environmental, Social and Governance) strategy and corporate sustainability is advantageous.

Others:

• Working Location: Bulim Walk (nearest MRT: Boon Lay)
• Mondays - Fridays: 8:00am to 5:30pm
• Uniform & Lunch provided
• Company transportation at various pickup points (Northern & Western areas of Singapore)

Job Description & Requirements

ASNT NDT Level III, PCN NDT Level III, Advanced NDT Specialist

Familiarisation of ASME & API Codes & Standards

Ability to assume full technical responsibility for clients’ NDT facilities.

Proven experience of providing solutions to clients’ NDT inspection related problems.

Maintain all of equipment and consumable storage in the store room to be ready for using with good conditions under acceptance criteria specific by client or international standard.

Willingness to be flexible and multi-task as part of a team, and contribute to company objectives.

Strongly motivated to achieve results, with a high degree of professionalism, honesty and integrity.

Excellent organizational and time management skills, able to priorities workloads with competing deadlines.

Good written skills to produce coursework and training materials, as well as clients’ NDT procedures, written practices, techniques and audit reports.

Provide internal trainiand technical guidance for other inspectors

Ensure that all personal certification is kept up to date.

Develop and approve NDT procedures, written practices and NDT techniques to a high standard that comply with clients

Creative skills to plan and deliver lessons in a professional, positive and engaging manner.

Ensure adequate training and cross checking the site works, share knowledgewith team members and contribute to team development.

To analyse work plans and projects, and as well as recommendations of every working unit; and to give advice on safety measures to the employer.

Feedback on revised Equipment’s and software’s for improvement.

Feedback after testing the new equipment on site for improvement.

Extensive knowledge of own subject area with extensive industrial NDT experience holding multiple NDT method Level III certification ASNT (RT,PT,UT,MT,VT,ET) /CSWIP (PAUT/TOFD)

Preferable:

Master's degree in NDT

Bachelor degree in Mechanical Engineering

Job Description & Requirements

· Ensure timely generation and issuance of NDT report on daily basis.

· The inspector/team lead / engineer will perform inspections applying various NDT techniques in accordance with applicable specific code, procedure, and or written criteria.

To be successful in this position, you must have the ability to demonstrate or possess:

· Minimum 3 years of experience in UT, MT, PT, ET, RT and RI.

· Must be a PCN Level 2 or ISO Level II in the above NDT methods.

· Familiar with codes and standards.

· Candidate must be flexible and responsive when call for assignments and willing to work after hours and weekends when necessary.

· Maintain a professionalism and competence at work

· Share in our purpose – to serve others, to pursue excellence, and to grow profitably,

· Employee will work as a team lead / member of local call out crews performing UT, MT, PT, ET, RT and RI.

Key Responsibilities:

• Provide daily general cleaning & housekeeping services for office area which include working areas, washroom, pantry areas, meeting rooms and common areas (i.e. walkways, staircases, landscape areas).
• Assist in preparing and serving of light snacks, fruits and drinks/beverages to visitors/guests whenever required.
• Keep the office pantry area clean & tidy and maintaining the general cleanliness of kitchen appliances and cleaning equipment in a safe and efficient manner.
• Refilling and restocking of cleaning supplies and toiletries (hand wash, toilet paper, paper towels etc) and pantry supplies (biscuits, beverages etc).
• Maintaining cleaning products and pantry supplies and update HR & Admin department to order new supplies when necessary.
• Daily clearing of waste bins and dispose all the rubbish from office to designated areas.
• Watering and maintenance of plants.
• Any other general cleaning duties and ad hoc duties as assigned.

Key Requirements

• Prior office housekeeping/cleaning experience is advantageous.
• Good communication and interpersonal skills.
• Able to multi-task and work independently.
• Positive attitude, committed, hardworking and responsible.
• Suitable for mature workers who are staying in Jurong West vicinity.
• Able to start immediately or at a short notice.
• Working Hour: Monday to Friday, 830am to 6pm (inclusive of one hour lunch break).

Interested applicants can WhatsApp or Call +65 9684 1509

Job Description & Requirements

Business Development Manager Job brief

We are looking for an ambitious and energetic Business Development Manager to help us expand our clientele. You will be the front of the company and will have the dedication to create and apply an effective sales strategy.

The goal is to drive sustainable financial growth through boosting sales and forging strong relationships with clients.

Business Development Manager Responsibilities

• Develop a growth strategy focused both on financial gain and customer satisfaction Conduct research to identify new markets and customer needs
• Arrange business meetings with prospective clients
• Promote the company’s products/services addressing or predicting clients’ objectives
• Prepare sales contracts ensuring adherence to law-established rules and guidelines
• Keep records of sales, revenue, invoices etc.
• Provide trustworthy feedback and after-sales support
• Build long-term relationships with new and existing customers
• Develop entry level staff into valuable salespeople
• Developing goals for the development team and business growth and ensuring they are met.
• Training personnel and helping team members develop their skills.
• Finding and developing new markets and improving sales.
• Perform any other duties assigned by the director.

Business Development Manager Requirements and skills

• Proven working experience as a business development manager, sales executive or a relevant role Proven sales track record
• Experience in customer support is a plus
• Proficiency in MS Office and CRM software (e.g. Salesforce)
• Proficiency in English
• Market knowledge
• Communication and negotiation skills
• Ability to build rapport
• Time management and planning skills
• BSc/BA in business administration, sales or relevant field
• The ability to work under pressure.
• Availability to work within opening hours (e.g. evenings, holidays, weekends).

Job Description & Requirements
Roles & ResponsibilitiesJob Requirement & Description:· Possesses Class 3 or class 4 Driving License. Min 2 years’ experience preferred· Possesses at least more than 2 years of driving experience are also welcome to apply· Have experience in driving 10ft/ 20ft lorry/ Prime Mover· Ability to commit to 6 days work week & willing to work overtime· Daily delivery service & handle daily routes and millruns· Ensuring proper endorsements and documentations is completed· Salary commensurate with driving experience and shift flexibility· Familiarity with handling temperature-controlled life science products or Air products· Familiar with Singapore Roads· Ability to read, write, communicate and understand English· Good natured/ positive· Adhoc collection/ deliveries

2. SKILLS

Job Description & Requirements

Review the inspection history to summarize the integrity status of the plant equipment and piping systems.

· Perform the scoping work and prepare the job pack for process piping and in-service equipment based on engineering assessment and annual inspection plan.

· Plan and carry out fixed equipment/piping inspection via on-stream risk-based monitoring programs and downtime inspection activities including corrosion under Insulation (CUI) and corrosion under pipe support (CUP) on process piping and equipment according to annual maintenance plan

· Identifying the areas of special concern and deterioration (e.g. Dead legs, injection points, mix points, corrosion under insulation and Low silicon Inspection).

· Supervision and coordination of all on-stream and shutdown inspection and NDT activities for static equipment and in-service process piping.

· Review of inspection test plan, WPS and method statement for any in-service repair work of piping and pressure vessels.

· Witnessing of PT, MPI, PMI, metallographic tube testing and Hydro static test for statutory equipment.

· Provide recommendations and timely updates on equipment degradation problems.

· Provide quality assurance on project construction and maintenance works to ensure compliance with applicable codes, standards and specifications.

· Preparation of final inspection reports with all findings, abnormalities and recommendations.

· Ensure quality of inspected items to meet project requirements and standards.

· Inservice inspections in refineries / Oil and Gas / Petrochemical industries, such as corrosion under pipe support (CUPS), corrosion under insulation (CUI), Injection & Mix points inspections.

· Read, understand project related ITP, procedures, specification requirements.

· Review documents and drawings as per specification • Knowledge / experience about Piping Isometrics, P & ID, general arrangement drawings, Structural drawings, Weld Maps, welding symbols, Cutting Plans, Quality control procedures, Base Materials, and welding consumables.

· Inspection, review of mill certificates, Material verification, Inspection of Pipes, Fittings, Flanges, valves, nipples, plate tubes as per respective materials specifications, Codes, Standards & Client Specifications. Inspection / Witness & Review Stage wise activities earlier stage of spool fabrication

· Knowledge in welding inspection

Eligibility Criteria

· Graduate Engineers with 3-6 years of relevant experience.

· Relevant Engineering Degree or Diploma in Mechanical, Petroleum/Oil/Gas, Civil, Chemical or Industrial Engineering are acceptable.

· Experience in Refinery and Oil & Gas must

· Experience in QA/QC and Knowledge in Non-Destructive Testing methods.

· Knowledge/experience in welding inspection, structural fabrication, piping Isometric drawing and piping materials.

· Work Independently and can work in Singapore and other countries.

· Fluent Reading, Speaking and Writing in English.

· Willing to commit 24 months contract/ project completion.

· Team Worker, Mature, Meticulous, Pro-Active Work Attitude & Work Independent.

· Energetic & Result Orientated.

Join Our Team at the School of Physical and Mathematical Sciences, Nanyang Technological University, Singapore

The School of Physical and Mathematical Sciences (SPMS) at NTU Singapore hosts research and education activities in two divisions: Division of Mathematical Sciences (MAS) and Division of Physics and Applied Physics (PAP). MAS covers diverse topics ranging from pure mathematics to the applications of mathematics in cryptography, computing, business, and finance. PAP covers many areas of fundamental and applied physics, including quantum information, condensed matter physics, biophysics, and photonics. Over the years, SPMS has attracted talented individuals from around the world and Singapore to join as scientific leaders and researchers.

Position Available: Research Fellow in Theoretical Polaritonics

Following the commencement of a new NRF CREATE project (N-GAP) and a soon to start MOE Tier 3 project (Quantum Geometric Advantage), we need to increase the capacity of our group to perform theoretical research and meet the project objectives.

Key Responsibilities:

• Conduct theoretical modelling of exciton-polariton systems
• Provide modelling of exciton-polariton networks and lattices

Job Requirements:

• PhD degree in theoretical polaritonics or related areas, with focus on the modelling of exciton-polariton lattices
• Experience in the physics of topological phases of matter, nonlinear optics, and open quantum systems
• Strong publication record

The College of Science seeks a diverse and inclusive workforce and is committed to equality of opportunity. We welcome applications from all and recruit on the basis of merit, regardless of age, race, gender, religion, marital status and family responsibilities, or disability.

We regret to inform that only shortlisted candidates will be notified.

Job Description & Requirements

The Technical Consultant is responsible for providing technical guidance and expert advice to our banking clients on the configuration of Temenos Products and customized developments throughout all stages of projects from initiation to post-live support. The Candidate should have strong core banking and/or Private Wealth Management technical experience in a Temenos Suite of products (T24 or TAP and TTI). The candidate should have strong stakeholder management and communication skills and should possess a strong implementation background with Team management experience in Core banking transformation projects.

Key Roles and Responsibilities

1. Perform the roles of Technical Lead, and/or Technical Consultant for the Temenos T24 Core Banking projects from Analyse & Design phase to post-live support.

2. Possess the capability to play integral technical roles as part of large project teams, working with senior management within Technology and Business groups, vendors, and other relevant internal and external stakeholders.

3. Take leadership of the appropriate areas of responsibility assigned and participate in the successful development and execution of testing, data migration, integration, cutover plans, and execution.

4. Install custom enhancements, validate technical setup, and conduct necessary testing to ensure user acceptance and global quality of the solution delivered.

5. Provide clear and concise technical documentation for internal and external use.

6. Conduct Client technical and End-user training as and when necessary.

7. Assist on the Migration strategy and migration developments.

Requirements:

1. Bachelor’s degree with a minimum of 8 years of experience in Temenos T24 Software technical consultancy, expert Services, and ideally in a banking environment.

2. Experience and proven track record in the end-to-end implementation of T24 Core Banking transformation or Wealth Suite projects with hands-on T24 Architecture design will be highly preferred.

3. Techno-functional consultants with both technical experience and Product experts with in-depth knowledge of the below T24 modules are highly preferred.

• Securities and Corporate Actions, Derivatives (DX),
  • Structured Products (SY) and
  • Treasury Modules (MM,FX and Swaps)

4. Financial Accounting and GL reporting with hands-on experience in preparation of Accounting Schemas, charts of Accounts and analysing GL mismatches and corrections will be highly preferred

5. Experience in Planning and Execution of multiple T24 upgrades, TAFC to TAFJ Migration, and Performance tuning projects will be an added advantage.

6. Hands-on experience in Integration framework, IRIS and Design Frameworks are highly preferred

7. Technical knowledge: INFOBASIC, T24 JAVA API coding, JAVA, ORACLE 10 (or above) operating systems, knowledge, and familiarity with the functionality of UNIX, AS400, and NT, particularly disc structures.

8. Exposure To Wealth Suite Integration (T24 - TAP Integration TTI and TDS Integration).

9. Other: Analytical, organized, team player and able to work in a multicultural environment, excellent presentation skills.

2. SKILLS

Technical Documentation

Oracle

Temenos T24

As400

Private Wealth Management

Unix

Securities

TDS

Data Migration

Operating Systems

Team Management

Architecture Design

Banking

Presentation Skills

Team Player

Java

API

Stakeholder Management

Job Description & Requirements

The Technical Consultant is responsible for providing technical guidance and expert advice to our banking clients on the configuration of Temenos Products and customized developments throughout all stages of projects from initiation to post-live support. The Candidate should have strong core banking and/or Private Wealth Management technical experience in a Temenos Suite of products (T24 or TAP and TTI). The candidate should have strong stakeholder management and communication skills and should possess a strong implementation background with Team management experience in Core banking transformation projects.

Key Roles and Responsibilities

1. Perform the roles of Technical Lead, and/or Technical Consultant for the Temenos T24 Core Banking projects from Analyse & Design phase to post-live support.

2. Possess the capability to play integral technical roles as part of large project teams, working with senior management within Technology and Business groups, vendors, and other relevant internal and external stakeholders.

3. Take leadership of the appropriate areas of responsibility assigned and participate in the successful development and execution of testing, data migration, integration, cutover plans, and execution.

4. Install custom enhancements, validate technical setup, and conduct necessary testing to ensure user acceptance and global quality of the solution delivered.

5. Provide clear and concise technical documentation for internal and external use.

6. Conduct Client technical and End-user training as and when necessary.

7. Assist on the Migration strategy and migration developments.

Requirements:

1. Bachelor’s degree with a minimum of 8 years of experience in Temenos T24 Software technical consultancy, expert Services, and ideally in a banking environment.

2. Experience and proven track record in the end-to-end implementation of T24 Core Banking transformation or Wealth Suite projects with hands-on T24 Architecture design will be highly preferred.

3. Techno-functional consultants with both technical experience and Product experts with in-depth knowledge of the below T24 modules are highly preferred.

• Securities and Corporate Actions, Derivatives (DX),
  • Structured Products (SY) and
  • Treasury Modules (MM,FX and Swaps)

4. Financial Accounting and GL reporting with hands-on experience in preparation of Accounting Schemas, charts of Accounts and analysing GL mismatches and corrections will be highly preferred

5. Experience in Planning and Execution of multiple T24 upgrades, TAFC to TAFJ Migration, and Performance tuning projects will be an added advantage.

6. Hands-on experience in Integration framework, IRIS and Design Frameworks are highly preferred

7. Technical knowledge: INFOBASIC, T24 JAVA API coding, JAVA, ORACLE 10 (or above) operating systems, knowledge, and familiarity with the functionality of UNIX, AS400, and NT, particularly disc structures.

8. Exposure To Wealth Suite Integration (T24 - TAP Integration TTI and TDS Integration).

9. Other: Analytical, organized, team player and able to work in a multicultural environment, excellent presentation skills.

2. SKILLS

Technical Documentation

Oracle

Temenos T24

As400

Private Wealth Management

Unix

Securities

TDS

Data Migration

Operating Systems

Team Management

Architecture Design

Banking

Presentation Skills

Team Player

Java

API

Stakeholder Management

• Salary up $6000
• 5 days work week
• 8am to 5.45pm
• Location: Woodlands

Responsibilities:

• Liaise with clients, sub-contractors, and suppliers on project requirements.
• Assist in preparing tenders and commercial bids to attract new business.
• Discussing, drafting, reviewing and negotiating the terms of business contracts.
• Create plans, estimate costs and timelines, and oversee construction schedules while managing unexpected costs.
• Attend site meetings, track progress, analyze outcomes, and prepare detailed reports, including cost analyses and variations.
• Oversee project execution, optimize resources, and address disputes or complaints as needed.

Requirement:

• Diploma in Quantity Surveying / Building or equivalent
• Min 5 years working experience in residential and industrial projects
• Knowledge in Mechanical and Electrical

For consideration, kindly submit your CV by clicking “APPLY Now” or email to "[email protected]"

**Only shortlisted candidate would be notified**

EA Reg. No: R1222284 | Kelvin Soh

Job Description & Requirements

· Maintain a professionalism and competence at work

· Share in our purpose – to serve others, to pursue excellence, and to grow profitably,

· Employee will work as a team lead / member of local call out crews performing UT, MT, PT, ET, RT and RI.

· Ensure timely generation and issuance of NDT report on daily basis.

· The inspector/team lead / engineer will perform inspections applying various NDT techniques in accordance with applicable specific code, procedure, and or written criteria.

To be successful in this position, you must have the ability to demonstrate or possess:

· Minimum 3 years of experience in UT, MT, PT, ET, RT and RI.

· Must be a PCN Level 2 or ISO Level II in the above NDT methods.

· Familiar with codes and standards.

· Candidate must be flexible and responsive when call for assignments and willing to work after hours and weekends when necessary.

Job Description & Requirements

.Read, understand project related ITP, procedures, specification requirements.

· Review documents and drawings as per specification • Knowledge / experience about Piping Isometrics, P & ID, general arrangement drawings, Structural drawings, Weld Maps, welding symbols, Cutting Plans, Quality control procedures, Base Materials, and welding consumables.

· Inspection, review of mill certificates, Material verification, Inspection of Pipes, Fittings, Flanges, valves, nipples, plate tubes as per respective materials specifications, Codes, Standards & Client Specifications. Inspection / Witness & Review Stage wise activities earlier stage of spool fabrication

· Knowledge in welding inspection

Eligibility Criteria

· Graduate Engineers with 3-6 years of relevant experience.

· Relevant Engineering Degree or Diploma in Mechanical, Petroleum/Oil/Gas, Civil, Chemical or Industrial Engineering are acceptable.

· Experience in Refinery and Oil & Gas must

· Experience in QA/QC and Knowledge in Non-Destructive Testing methods.

· Knowledge/experience in welding inspection, structural fabrication, piping Isometric drawing and piping materials.

· Work Independently and can work in Singapore and other countries.

· Fluent Reading, Speaking and Writing in English.

· Willing to commit 24 months contract/ project completion.

· Team Worker, Mature, Meticulous, Pro-Active Work Attitude & Work Independent.

· Energetic & Result Orientated.

Review the inspection history to summarize the integrity status of the plant equipment and piping systems.

· Perform the scoping work and prepare the job pack for process piping and in-service equipment based on engineering assessment and annual inspection plan.

· Plan and carry out fixed equipment/piping inspection via on-stream risk-based monitoring programs and downtime inspection activities including corrosion under Insulation (CUI) and corrosion under pipe support (CUP) on process piping and equipment according to annual maintenance plan

· Identifying the areas of special concern and deterioration (e.g. Dead legs, injection points, mix points, corrosion under insulation and Low silicon Inspection).

· Supervision and coordination of all on-stream and shutdown inspection and NDT activities for static equipment and in-service process piping.

· Review of inspection test plan, WPS and method statement for any in-service repair work of piping and pressure vessels.

· Witnessing of PT, MPI, PMI, metallographic tube testing and Hydro static test for statutory equipment.

· Provide recommendations and timely updates on equipment degradation problems.

· Provide quality assurance on project construction and maintenance works to ensure compliance with applicable codes, standards and specifications.

· Preparation of final inspection reports with all findings, abnormalities and recommendations.

· Ensure quality of inspected items to meet project requirements and standards.

· Inservice inspections in refineries / Oil and Gas / Petrochemical industries, such as corrosion under pipe support (CUPS), corrosion under insulation (CUI), Injection & Mix points inspections.

Responsibilities:

• Report directly to Mechancial Department Head in all matters
• Supporting Engineers and Senior Engineers in day to day operation
• Supervise and ensure safety of vessel maintenance and repair works.
• Leading a team of Technician to perform repair and maintenance onboard ships
• Carry out troubleshooting and rectification of mechanical/diesel defects.
• Perform joint inspection and acceptance with ship representative
• Hands on work in rectification of defects and maintenance of mechanical components
• Ensure quality of work performed by ownself and technician deployed
• Assist in logistic support, lifting of equipment and workshop equipments etc

Requirements:

• Diploma in Mechanical / Marine Engineering
• Able to use IMTE Tools such as Torque Wrench, Pressure gauges, Internal and External Micrometer
• Able to work under pressure
• Able to work in a team
• Able to perform hands on work
• Able to work in shipyard environment – heat, grease, dust
• Proficiency in Microsoft Word, Excel
• Only Singapore Citizens will be considered for this role

Other Information:

• Location: Changi
• Transport provided at or nearby: Jalan Bahar, Pioneer MRT, Boon Lay MRT, Lakeside MRT, Jurong West & East, Jalan Bukit Merah, Choa Chu Kang MRT, Bukit Panjang Plaza, Woodlands, Sembawang MRT, Yishun MRT, Bishan MRT, Ang Mo Kio MRT, Hougang Ave 8, Sengkang Square, Punggol Central, Pasir Ris MRT, Tampines MRT, Tanah Merah MRT
• 5 days work week
• Working Hours: 7.45am-5pm

Job Description & Requirements

ASNT NDT Level III, PCN NDT Level III, Advanced NDT Specialist

Familiarisation of ASME & API Codes & Standards

Ability to assume full technical responsibility for clients’ NDT facilities.

Proven experience of providing solutions to clients’ NDT inspection related problems.

Maintain all of equipment and consumable storage in the store room to be ready for using with good conditions under acceptance criteria specific by client or international standard.

Willingness to be flexible and multi-task as part of a team, and contribute to company objectives.

Strongly motivated to achieve results, with a high degree of professionalism, honesty and integrity.

Excellent organizational and time management skills, able to priorities workloads with competing deadlines.

Good written skills to produce coursework and training materials, as well as clients’ NDT procedures, written practices, techniques and audit reports.

Provide internal trainiand technical guidance for other inspectors

Ensure that all personal certification is kept up to date.

Develop and approve NDT procedures, written practices and NDT techniques to a high standard that comply with clients

Creative skills to plan and deliver lessons in a professional, positive and engaging manner.

Ensure adequate training and cross checking the site works, share knowledgewith team members and contribute to team development.

To analyse work plans and projects, and as well as recommendations of every working unit; and to give advice on safety measures to the employer.

Feedback on revised Equipment’s and software’s for improvement.

Feedback after testing the new equipment on site for improvement.

Extensive knowledge of own subject area with extensive industrial NDT experience holding multiple NDT method Level III certification ASNT (RT,PT,UT,MT,VT,ET) /CSWIP (PAUT/TOFD)

Preferable:

Master's degree in NDT

Bachelor degree in Mechanical Engineering

Job Description & Requirements

· Ensure timely generation and issuance of NDT report on daily basis.

· The inspector/team lead / engineer will perform inspections applying various NDT techniques in accordance with applicable specific code, procedure, and or written criteria.

To be successful in this position, you must have the ability to demonstrate or possess:

· Minimum 3 years of experience in UT, MT, PT, ET, RT and RI.

· Must be a PCN Level 2 or ISO Level II in the above NDT methods.

· Familiar with codes and standards.

· Candidate must be flexible and responsive when call for assignments and willing to work after hours and weekends when necessary.

· Maintain a professionalism and competence at work

· Share in our purpose – to serve others, to pursue excellence, and to grow profitably,

· Employee will work as a team lead / member of local call out crews performing UT, MT, PT, ET, RT and RI.

Brief Summary:

• Basic $2500-$2800
• OT Allowance

Responsibilities:

• Develop and execute the company’s business strategies in order to attain the goals of the board
• Provide strategic advice to the board and Chairperson so that they will have accurate view of the market and the company’s future
• Prepare and implement comprehensive business plans to facilitate achievement by planning cost-effective operations and market development activities
• Ensure company policies and legal guidelines are communicated all the way from the top down in the company and that they are followed at all times
• Communicate and maintain trust relationships with shareholders, business partners and authorities
• Oversee the company’s financial performance, investments and other business ventures
• Delegate responsibilities and supervise the work of executives providing guidance and motivation to drive maximum performance
• Read all submitted reports by lower rank managers to reward performance, prevent issues and resolve problems

Requirements:

• Proven 6 years experience as Managing Director or other managerial position.
• Demonstrable experience in developing strategic and business plans.
• Thorough knowledge of market changes and forces that influence the company.
• Strong understanding of corporate finance and measures of performance
• Familiarity with corporate law and management best practices
• Excellent organisational and leadership skills
• Excellent communication, interpersonal and presentation skills
• Outstanding analytical and problem-solving abilities

Job Description & Requirements

ASNT NDT Level III, PCN NDT Level III, Advanced NDT Specialist

Familiarisation of ASME & API Codes & Standards

Ability to assume full technical responsibility for clients’ NDT facilities.

Proven experience of providing solutions to clients’ NDT inspection related problems.

Maintain all of equipment and consumable storage in the store room to be ready for using with good conditions under acceptance criteria specific by client or international standard.

Willingness to be flexible and multi-task as part of a team, and contribute to company objectives.

Strongly motivated to achieve results, with a high degree of professionalism, honesty and integrity.

Excellent organizational and time management skills, able to priorities workloads with competing deadlines.

Good written skills to produce coursework and training materials, as well as clients’ NDT procedures, written practices, techniques and audit reports.

Provide internal trainiand technical guidance for other inspectors

Ensure that all personal certification is kept up to date.

Develop and approve NDT procedures, written practices and NDT techniques to a high standard that comply with clients

Creative skills to plan and deliver lessons in a professional, positive and engaging manner.

Ensure adequate training and cross checking the site works, share knowledgewith team members and contribute to team development.

To analyse work plans and projects, and as well as recommendations of every working unit; and to give advice on safety measures to the employer.

Feedback on revised Equipment’s and software’s for improvement.

Feedback after testing the new equipment on site for improvement.

Extensive knowledge of own subject area with extensive industrial NDT experience holding multiple NDT method Level III certification ASNT (RT,PT,UT,MT,VT,ET) /CSWIP (PAUT/TOFD)

Preferable:

Master's degree in NDT

Bachelor degree in Mechanical Engineering

Responsibilities

• Timely delivery and collection of goods to assigned outlets

• Able to handle loading/ unloading of heavy goods

• Maintain a clean and organized vehicle

Requirements

• Valid Class 3/4 Singapore Driving license

• Good driving record

• Experience in driving box truck preferred

• Punctual and reliable

If you are interested in this position, kindly contact Mr William Tan at 9022 8693 to schedule for an interview session.

工作职责

• 将货物送到指定的销售点

• 能够处理重货的装卸

• 保持车辆清洁

职位要求

• 3/4号驾驶执照

• 良好的驾驶记录

• 有开驾驶箱货车经验者优先

• 准时可靠

如果您对此职位感兴趣，请联系 Mr. William Tan 9022 8693安排面试。