PURPOSE

• Surveyors is to ensure all ISO Tank Containers turned into our depot are surveyed, cleaned and repaired to the customers requirement standard criteria comply to ITCO/ACC or owner criteria.

SCOPE

• Surveyors is to ensure all ISO Tank Containers that have been accepted by MW Tank Depot.

RESPONSIBILITY

• Surveyors is to ensure that all ISO Tank Containers turned into our depot must conduct surveyed.
• Surveyors’ responsibility for all the ISO tank containers turn into depot are thoroughly survey correctly and to ensure the documents are endorsed before issued the Equipment

JOB DESCRIPTION

• All ISO tank containers turn into depot, surveyors ensure to stick a yellow and red colour
• Sticker onto the Left-Hand Side of the corner post before off load.
• Surveyors must coordinate with the Leese/Lessor independent surveyor for joint inspection.
• As part of a Surveyors duties, ensure to conduct thorough inspection after the cleaning, repaired and testing completed.
• Surveyors must thoroughly inspect the Tank Containers and raised estimates after the cleaning completed.
• Surveyors must report to the supervisor on all documentation of ISO Tank containers before sending to customers
• Surveyors will conduct Pre/Post inspection, if require by Customers. (Before Repair and After Repaired)
• As a surveyors must obtain instruction from the Supervisor.
• Surveyors must inform the Side Lifter Drivers to shift the Tank Containers into the
• workshop area for repair when Customers given the approval to repair.
• Surveyors must hand over the approved estimates to the Repairer Supervisor afterthe tank containers shifted into the repair bay.
• Surveyors ensure the repairer repair items accordingly indicated on the estimates and repair standard complies to ITCO/ACC or Owner criteria.

Summary of the Job: (Primary function of the job)

• Lead a team of engineers, technicians and sub-contractors in

assembly, debugging and commission of SI automation projects

• Ensure work place safety, cleanliness, discipline, punctuality,

efficiency, and good workmanship.

Job Responsibilities:

• Lead and ensure workplace safety to be maintained at all times

• Plan deployment for projects to ensure maximum utilisation of

resource

• Lead and coordinate the setup, assembly, testing, debugging and

commissioning activity to ensure best efficiency

• Provide solutions and give guidance to the team for the technical

and non-technical issues

• Lead and ensure production floor disciplne and work punctuality

• Manage common tools, equipments and consummables

• Provide regular trainings on debugging and best practice in

workmanship

• Lead and ensure practice of 5S

• Interview, hire, train, and mentor the engineers and technicians

• Provide regular performance updates to the manager

• Perform additional duties as assigned

Job Requirements:

• Bachelor degree or Diploma in engineering or related field of study

• Minimum 10 years supervisory experience in assembly and setup

in system integration for factory automation projects

• Analytical problem-solving skills with an impeccable attention to

detail

• Demonstrated strong leadership quality

• Previous experience in SI (System Integration) environment

preferred

About the Role:
We are seeking an AI Engineer specializing in NLP to join our core tech team. You will develop and refine NLP and speech recognition models to power our fintech solutions. Working side-by-side with Product, Backend, and overseas engineering counterparts, you will help bring cutting-edge language technologies to life, delivering improved user experiences and efficient operations.

Key Responsibilities:

• Model Development: Design, train, and optimize NLP models (e.g., language models, entity recognition, sentiment analysis) using Python and frameworks like TensorFlow or PyTorch.
• Algorithm Innovation: Explore and implement state-of-the-art NLP techniques, keeping current with research and best practices in the industry.
• Data Pipeline & Integration: Collaborate with Backend Developers and overseas engineering teams to integrate AI models into production environments, ensuring scalability and performance.
• Performance Tuning & Evaluation: Continuously evaluate model performance, conduct error analysis, and fine-tune algorithms to meet product and business objectives.
• Documentation & Knowledge Sharing: Document your work comprehensively, and mentor or guide team members in AI best practices as needed.

Qualifications:

• Experience: 3-5 years in AI/ML engineering, with demonstrated experience in NLP projects.
• Technical Skills: Proficient in Python and familiar with machine learning frameworks (TensorFlow, PyTorch). Experience with modern NLP techniques (e.g., Transformers) is a plus.
• Problem-Solving: Ability to translate complex problems into technical solutions and optimize models for real-world fintech applications.
• Teamwork: Strong collaboration skills to work effectively with cross-functional teams, including product and overseas engineering partners.
• Able to communicate in mandarin to work with chinese-speaking counterparts.

· Analysing current business processes, workflows and procedures to identify areas for improvement.

· Developing and implementing optimised processes and procedures to enhance efficiency, productivity and customer satisfaction.

· Collaborating with stakeholders to design and execute process improvement initiatives aligned with organisational goals.

· Monitoring and evaluating the effectiveness of implemented process changes, measuring key performance indicators and making necessary adjustments for continuous improvement.

· Stay updated on industry trends, emerging technologies and process improvement methodologies.

· Following specifications and calculations to create various technical drawings with CADD systems.

Responsibilities:

• To cover design aspects for systems such as Radars, Navigation Comms, Integrated Comms, Integrated Combat Systems and Layout designs
• Work with other trades on integration design between Platform and Systems
• To prepare the General Arrangement Plan (GAP)
• Preparation of tender proposal and technical specifications for tender submission
• Establish Major Equipment Specifications and Selections
• To check and ensure equipment specification, technical information, functional description document, installation control document and interface design specification are correct and properly maintained, disseminate and use for the preparation of design work activities
• Planning and control of Basic design document schedule to support project milestone
• To develop of new designs and design concepts;
• To source for new design tools;
• To provide specialist technical assessment and analysis other in-house departments and external parties
• To continue updating the developing and expanding of the design database
• To participate in tests and sea trials, including HAT and SAT, where required
• Perform detail design calculation where necessary
• To follow up and resolve all the design issues raised by Owner, Classification and Statutory Authorities on all design documents promptly and timely to support the schedule, including on site checking and discussions
• To generate 2D arrangement drawings for major equipment
• To generate list of design drawing / document specific to each project
• To check working drawings and ensure that they conform to contractual technical specification, installation control documents, Classification and Statutory Rules/Regulations
• To keep abreast with current technological developments and products, Classification rules, military and industrial standards and other standards relevant to design activities.

Requirements:

• Degree in Electrical & Electronics Engineering
• 3 to 5 years of relevant experience in Marine related projects on Navigation Communications Systems and Radars (Fire Contol & Surveillance) will be advantageous
• Possess both project management and man management experience
• Ability to manage external and internal stakeholders will be critical for this role
• Proficiency in AutoCAD
• Only Singaporeans will be considered for this role

Additional Information:

• Location: Benoi Road (Island-wide transport provided)
• 5 days work week
• Working Hours: 7.25am to 5.00pm

Main Task

1 Handle Shipment & Logistics

2 Shipping Guarantee

3 Give Training & assist buddy to support Project shipping & logistics 4 Vendor Presentation & Training as per request

5 PO Creation under shipment

6 Expedite material delivery when required

Details Task for Shipment & Logistics

1 Source of potential Forwarder and understand their strength 2 Evaluate and update new/exisiting Forwarder into Approved Vendor List

3 Ensure the appropriate Incoterms specified on the purchase order are carried out.

4 Prepare Bid Tab if required for Shipping Cost & Discuss on issuing of Puchase Order

5 Process order and ensure timely Shipment and Delivery of Purchased products

6 Coordinate & provide assistance between Requester, Suppliers and Forwarders and Receivers

7 Coordinate and assist with all necessary Import & Export Documentation for all Projects

8 Ensure documents are given to Forwarders before vessel ETA & avoid any Storage or Demurrage charges

9 Ensure timely return of Containers to yard & avoid Detention charges

10 Provide all necessary Import / Export documents to Finance for their processing on GST

11 Corodinate with FIN for payment if any issues with Forwarder invoices

12 Arrange to return back original Shipping Guarantee to bank once receive Original BL

13 Run PO report under shipment and follow invoice pending for shipment if required

Vendor Presentation

1 Send invitation to Vendors to conduct Vendor Presentation

2 Ensure topic is relevant to our projects

3 Coordinate for date time and venue

4 Inform all users on the Vendor Presentation / Training

PO Creation

1 Convert PR to PO for Shipment

2 Once Purchase Order is created, save the WO copy PO in PDF and send it to requestor/buyer to check and advise for release if required

3 Once Purchase order is signed and send the approved purchase order to vendor for their action and cc to project team for their info

4 For Internal Vendor, approved PO will send via email to them for their end processing and cc to project team for their reference

Other Tasks

1 To conduct training for PROC (Internal) about shipment

2 To conduct 2 trainings as a team for BUs (external)

3 Expeditiing material delivery when require

Responsibilities:

Overseeing the construction activities and progress, planning, implementation and monitoring work schedules in accordance to the master and detailed work programme

Liaise with Professional Engineer on the Temporary works

Liaise with consultants (QPS) for technical issues and coordinate the site activities with subcontractors

Handing of technical and engineering problems

Provide guidance to supervisors in relation to construction works, ensure progress according to schedule, quality standards are maintained site inspections are carried out and technical issues are resolved on time

Prepare report and method statement whenever necessary

Manage and control workers and monitor their work closely to keep site safer and neat

Supervise ongoing site activities closely

Requirement:

Degree in Civil Engineering or Recognised Degree in the relevant field subject.

Min 5 years experience in construction site / projects in Singapore.

Join a fast-growing international company at the forefront of technological innovation! At Eetarp, we offer you not just a career but an opportunity to thrive in a challenging, rewarding, and supportive environment. With a competitive salary, you’ll enjoy a fulfilling role that inspires growth and success. Once you start working with us, you’ll never want to leave!

We are seeking a Procurement Engineer for our Singapore office. Take the next step in your career—apply now and become a key part of Eetarp’s exciting journey.

Job Description:

• Using the ERP system to create PO & analyze stock level.
• Support internal coordination between different departments.

-Follow up & update of orders lead time to Sales & Production Team.

• Supply Chain and Cost Management

-Coordinate with local & overseas Vendors.

-Plan and manage resources to maintain optimal stock levels, ensuring availability of materials while minimizing excess inventory.

-Monitor all purchases & follow up on orders lead time closely.

-Coordinate delivery of purchased goods to office.

-Communicate with suppliers when issues arise (eg. shortage, overcharges, and defects of materials).

-Source new suppliers for materials and services, expanding the suppliers base.

-Obtain competitive quotes and drive cost-reduction.

-Lead in conducting periodic price negotiation with suppliers to ensure competency in cost for materials/services.

-Conduct supplier’s performance review to ensure compliance with organizational standards.

• Technical Procurement and Documentation Management

-Ability to understand Bill of Materials and Technical Drawings for procurement purposes.

-Providing correct technical information in accordance with datasheet for new item creation in ERP system.

-Proper archive of calibration certificate and software license information in our server.

• Any duties as assigned.

Requirements:

• At least Diploma.
• At least 2 years’ experience in procurement, with electrical engineering background (knowledge/experience).
• Have strong communication, analytical & negotiation skills.
• Able to allocate resources flexibly to meet changing demands and project requirements.
• Team player, proactive, problem solving.
• Able to work independently and multitask.

Department: Sales/Business Development

Location: Mandai Link

Job Summary:

We are looking for a motivated and goal-oriented Sales Executive to join our team. The ideal candidate will be responsible for driving revenue growth, building strong client relationships, and achieving sales targets. This role is perfect for someone with excellent interpersonal skills, a passion for sales, and the ability to work in a fast-paced environment.

Key Responsibilities:

1. Sales Generation:

• Identify and develop new business opportunities through networking, cold calling, and client referrals.
• Meet and exceed individual and team sales targets.
• Present and demonstrate company products or services to potential customers.

2. Client Relationship Management:

• Build and maintain strong, long-term relationships with clients.
• Understand customer needs and provide tailored solutions.
• Handle client inquiries and ensure satisfaction with products and services.

3. Market Research:

• Stay updated on market trends, competitor activities, and customer preferences.
• Provide feedback to the management team for product/service improvements.

4. Reporting & Documentation:

• Maintain accurate records of sales activities and customer interactions.
• Prepare regular sales reports and forecasts for management review.

5. Collaboration:

• Work closely with the marketing team to execute promotional campaigns.
• Collaborate with other departments to ensure seamless customer onboarding and service delivery.

Requirements:

• Proven experience in sales, business development, or a related field.
• Strong communication, negotiation, and interpersonal skills.
• Ability to work independently and in a team.
• Goal-oriented mindset with a drive to exceed targets.
• Proficiency in using Microsoft Office Suite.
• Bachelor’s degree in Business, Marketing, or a related field is preferred but not required.
• A valid and up to date driving license is required.
• Working hours: Monday to Friday (8am to 5pm)

Application Process:

If you’re passionate about sales and have a knack for closing deals, we want to hear from you! Please send your resume and a cover letter to [email protected]

Licence No: 07C4571 / Registration No: R1440698

Looking for Class 3/4 driver fulltime working days 5.5

Various opening as we are expanding. job postion will be allocated base on experience.

Should be physically fit and have knowladge of singapore roads. For more details on salary and jobscope please call 86990901 Mr Clement to arrange for an interview.

um - bachelor’s degree in civil engineering

Job Description

1. Experience in Civil Engineering Design works in the area of;

- Structural Steel design

- Reinforced Concrete design

- Geotechnical Engineering Design

2. Able to lead the team of Engineers and drafters

3. Minimum 3-4 years of experience in C & S design in Singapore

4. Able to work under rushing schedule of works

5. Able to do AutoCAD drafting (if required)

6. Familiarize with preparation of Authorities Submission documents (BCA, URA, JTC, SCDF, PUB etc..)

7. Able to communicate with clients and Authorities

8. Well-versed in local code of practice, authorities’ regulations for submission.

9. Proficiency in engineering software such as STAAD-Pro, PLAXIS, Prokon, ETABs, TEKLA, MIDAS and SAFE etc.

Job Description:

• Support engineers in conducting site acceptance tests, commissioning, and start-up for transformers and switchgear. Knowledge of UPS, Low Voltage/Medium Voltage Variable Speed Drives, and PLC systems is a plus.
• Perform preventive maintenance, breakdown repairs, fault investigation, and troubleshooting of electrical equipment.
• Provide field operations and technical support to customers, helping them identify their needs and offering post-sales service solutions.
• Address on-site repair and maintenance issues, troubleshoot, and effectively resolve technical problems.
• Deliver field feedback to engineering and manufacturing teams to assist in new product development and improvements to existing products.
• Manage the procurement of spare parts from Supplier

Job Requirements:

• Diploma/ITE in Electrical Engineering or a related field.
• Relevant experience in technical servicing roles.
• Hands-on experience in customer service with the ability to work independently on-site.
• 1 to 2 years of field service experience in a related industry.
• Strong communication & analytical skills.
• Must be ready to travel on business trips

HOW TO APPLY :

Interested candidates, please submit your resume by clicking on “Apply Now” or aliceyap(a)hkmsvs.com

All applications will be treated in the strictest confidence and only shortlisted candidates will be notified

Yap Lay Choo

EA Licence No. 03C5391 | Registration No. R1987101

RESPONSIBILITIES:

· Co-ordinate with Other Project Engineers/Clients & Site Supervisors at projects’ sites, on progress of schedule and

work done

· Supervise and Inspect jobs done (Quality & Quantity) at projects’ sites.

· Perform Tic, Arc and Pipe Welding at Workshop and Project Sites.

· Perform Grinding Work of Iron, Stainless Steel and Aluminium Metals Works

· Fresh, or any experience as a Welder or related to Air-conditioning (ACMV Piping, Insulation works (Jacketing), and/or

Electrical is added advantage, but not must

Job Description

• To develop & implement strategic sales plan
• To coordinate sales, supply and operational activities with pipeline and export customers
• Interfacing with manufacturing functions and customers to implement supply plans, facilitate smooth product lifting and effective inventory management
• To conduct market research, detailed studies and analysis necessary to develop sales plan and pricing strategies/models

Requirements

• Recognized Degree, preferably in Engineering
• Minimum 1-2 years relevant experience in similar industry
• Resourceful, sociable with good interpersonal skills
• Analytical with good problem solving skills
• Good written and verbal communication
• Entry level candidates without relevant experience but with keen interest in the above job scope will also be considered

Attractive salaries commensurate with qualifications and experience will be offered to the right candidates, including the following elements of our Total Rewards package:

• Service Benefits (0.25 month to 0.5 month + $500 annually based on years of service)
• Location Allowance
• Medical Outpatient/Dental Subsidy & Hospitalization & Surgical Benefits for Spouse & Children
• Comprehensive Insurance Coverage
• Holiday, Sports and Wellness Subsidies
• Shuttle Bus Service to & fro between workplace & Jurong East MRT
• Flexible Work Arrangement - Hybrid Work Model (60%:40%)

Requirements:

Minimum - bachelor’s degree in civil engineering

Job Description

1. Experience in Civil Engineering Design works in the area of;

- Structural Steel design

- Reinforced Concrete design

- Geotechnical Engineering Design

4. Able to work under rushing schedule of works

5. Able to do AutoCAD drafting (if required)

6. Familiarize with preparation of Authorities Submission documents (BCA, URA, JTC, etc..)

7. Able to communicate with clients and Authorities

No experience/Diploma in Precision/Mechanical/Mechatronic/Electrical/Electronic/Industrial or related engineering

Basic (no experiene / fresh)-start from $2400-$2800+OT+allowances>$3K++

Diploma in Engineering

Have AWS & Bonus

Japanese MNC

Address: Gul Circle (Have company bus transportation islandwide)

Job Description

• Assist Supervisor in day-to-day operation lines.
• Planning & Co-coordinating the workflow on production lines to achieve production targets.
• Trouble shooting production problems and assist in planning new project work.
• Groom to be leader

Requirements

• Diploma in Engineering
• No experience / Entry level welcome to apply
  

Please submit your updated resume in MS format by using the APPLY NOW BUTTON.
Alternatively, you may also email your resume to us at [email protected]

Emily Fong
Senior Talent Specialist
Atomrecruit Pte. Ltd. | MOM EA License No.: 15C7443
EA Personnel Reg No.: R1768368

Responsibility

• Planning production schedule to meet the delivery date.
• Liaise with purchasing department on the availability of the packaging materials so as to synchronize with the production schedule.
• Supervise the preparation of products according to relevant manufacturing procedures.
• Ensure manufacturing procedures are carried out according to the standard operating procedures.
• Job arrangement of the manufacturing operators.
• Check all process control equipment are in good condition.
• Maintain enough or place order stock of miscellaneous production items
• Ensure good housekeeping and cleanliness of manufacturing areas.
• Perform line clearance and in-process packing line checks.
• To issue daily Packing Time Sheet.and prepare W.I.P. lists.
• Liaise with QC department on issues of product quality
• To participate in-house GMP audit checks.

Job Requirement

• Polytechnic Diploma in any field.
• At least 4 Year(s) of relevant working experience.
• Preferably Supervisory skill in a manufacturing environment

Prepare, plan and schedule of work sequences for construction operations as per construction drawings, specifications and contracts to understand project requirements.

Liaise with consultants, client and sub-contractors and coordinate for site activities arrangements.

Perform site inspection and ensure that the work are carried out based on the project specification and construction drawing/final approved drawing from authorities. ·

Monitoring work progress and ensure that civil contracted works meet all practical, commercial, requirements of productivity, quality and contract target completion. ·

Ensure all structural work is carried out within established budgets and schedules. ·

Manage internal and external contractors well to ensure quality of work and scope of work is within specifications. ·

Responsible for all inspection activities being carried out. ·

Assist the project manager in the daily coordination, planning and execution of the project plan site.

Prepare daily/weekly/monthly site work progress ·

Adherence to safety practices in the workplace and ensure compliances to standard rules and regulations. ·

BBS production and delivery monitoring and prepare RTO allocation for inspection, concrete booking and materials requisition.

Review drawing and design drawing issue monitoring ·

Handling technical and engineering problems on site. ·

To facilitate project meetings and prepare minutes of meeting

• Organizing materials and ensuring sites are safe and clean.
• Preparing cost estimates and ensuring appropriate materials and tools are available.
• Providing technical advice and suggestions for improvement on particular projects.
• Negotiating with suppliers and vendors to ensure the best contracts.
• Authorizing technical drawings and engineering plans.
• Drawing up work schedules and communicating any adjustments to crew members and clients.
• Gathering data, compiling reports and delivering presentations to relevant stakeholders.
• Delegating tasks and scheduling meetings and training sessions where required.
• Completing quality assurance and providing feedback to the team.

The incumbent is responsible to :

• Ensures medication management in own area of work is efficient, zero-wastage and inaccordance with best professional practices
• Reviews medication orders (medication chart or prescription) for appropriateness and intervenes with prescriber or follows up where necessary
• Ensures medications received by patients are packed correctly and dispensed within target turnaround time
• Ensures that all medication related costs and revenue in own course of work are accounted for and accurately recovered where applicable
• Assigns, overseas and reviews the work of subordinates in the same area of work. Ensures that all prescription, sales, supply, storage and distribution of medications, as well as their documentation, comply with legal requirements and relevant regulations established by the relevant authorities
• Precepts and trains pre-registration pharmacists, pharmacy technicians and pharmacy/pharmaceutical students according to training plan and guidelines
• Attends and provides lectures and other forms of continuing education to pharmacy staff and other hospital employees
• Provides feedback to inform department's continuing education agenda
• Leads research or quality improvement projects in the department

Job Requirements :

• Degree in Pharmacy accredited by the Singapore Pharmacy Council
• Registered Pharmacist with the Singapore Pharmacy Council
• Minimum 2 years' experience in hospital pharmacy-related work or minimum 1-2 years' experience in hospital pharmacy-related work with a relevant postgraduate degree

This position requires the dietitian to provide medical nutrition therapy to patients from various clinical disciplines at both inpatient and outpatient settings. The dietitian will also need to participate in community and public education/ activities to promote healthy eating and nutritional well-being. As part of continuous improvement, the dietitian is expected to contribute in quality improvement and/ or research activities.

As a senior dietitian, you will guide and mentor junior Dietitian, train and teach students on clinical placements, and participate in teaching of healthcare professionals.

Job Requirements:

• Bachelor Degree in Nutrition and Dietetics/ Master of Science in Nutrition and Dietetics/ Postgraduate Diploma in Dietetics
• Candidates with prior relevant experience preferred
• For the Senior position, a minimum of 4 years’ relevant experience in clinical setting with at least 1 year in a supervisory capacity preferred

Job Description & Requirements

Responsibilities:

• To despatch documents listed in the despatch form
• Fetching general workers to and fro Dormitory to Project Site.
• Ad hoc duties as per instructed by Project Manager.

Requirements:

• Able to use Basic English to communicate. In both spoken and written.
• Must possess Class 3 driving licence.
• Drivers with at least 5years of driving experience.

NTU Institute of Structure Biology (NISB) provides a complete pipeline for Structural Biology to accelerate discovery in basic and applied Bioscience.

At NISB, we aim to integrate a comprehensive set of Structural Biology tools to address fundamental questions in biology, to understand human diseases and to accelerate structure-based drug discovery. We have the expertise and equipment to bring your gene of interest from plasmid to atomic level structure using a series of state-of-the art platforms for Protein expression, biophysical characterization and imaging using cryo-EM, tomography or X-ray crystallography.

For more details, please view https://www.ntu.edu.sg/nisb

We are looking for a Senior Research Fellow to play a leading role in running NISB in close partnership with the NISB Director. This role offers a unique opportunity to drive impactful research while fostering collaboration and innovation in a dynamic scientific environment. The job scope includes:

Key Responsibilities:

• Collaborate with various academic and industry users of NISB facilities to define their needs and to help design and perform the experiments together with the core NISB team;
• Lead the NISB core team to ensure timely delivery of quality samples and deliverables (overexpressed protein, structure with proper protocol and documentation;
• Work with the core team to maintain accurate and comprehensive reporting and documentation for tasks commissioned by academic and industry users;
• Support NISB Director in advocating for NISB’s activities and technological platforms to enhance visitibility and engagement with stakeholders;
• Contribute to in-house research and platform technological development : the successful candidate can pursue independent research in structural biology or biotechnology aligned with the institute’s interest in protein structure and engineering.

Job Requirements:

• A PhD degree in Molecular Biology, Biochemistry, Structural Biology, Biotechnology or related field
• At least 2 years of relevant experiences in similar role / technical hands-on experience in protein related work
• Possesses international experience, acquired through postdoctoral experience documented by relevant publications
• Good written and oral communication skills
• Proficiency in handling software to collect and process Structural Biology data (XDS, CCP4, Phenix for X-ray crystallography and Cryosparc, Relion for Cryo-EM
• Very good publication record in international peer reviewed journals in relevant fields
• Strong ability to work independently, to develop solutions under strict timelines, meticulous and eye for details Excellent organizational and time management skills
• Demonstrates strong collaboration skills by working effectively with diverse academic and industry stakeholders, as well as thriving in a fast-paced environment alongside the NISB core team

We regret to inform that only shortlisted candidates will be notified.

Reporting to the Supervisor or other senior managers as required.

Liaising between the Supervisor and other employees.

Hiring and training new employees.

Developing training materials and conducting training sessions and workshops.

Establishing business knowledge and awareness of shared company goals.

Monitoring both individual and team job performance metrics.

Providing staff with technical guidance and assistance.

Relaying productivity concerns to the Supervisor.

Preparing job descriptions and work schedules.

Assisting with other administrative tasks, when required.

Key Responsibilities

• Repair and soldering of PCB boards.
• Handle repair works of electronics / electrical components of equipment
• Handle parts teardown, re-assembly, re-certification and qualification
• Conduct inspections and measurements to maintain high-quality standards.
• Assist and support fellow team members as needed.
• Meet productivity and quality goals.
• Any other ad-hoc duties.

Requirements

• Minimum GCE O Level/NITEC
• Experienced in troubleshooting Electronics / Electrical component
• Soldering experience is advantageous

Working Location:

Sungei Kadut

• Free shuttle Bus from Choa Chu Kang MRT & Yew Tee MRT to Gain City Megastore @ Sungei Kadut

Note:

• Only shortlisted candidates will be notified

Responsibilities:

• Maintain the debtor aging report and follow up with customers for payment.
• Manage the receipts portion of bank accounts.
• Maintain the Inventory Report (Chemicals).

- Check store withdrawals and store receipts keyed in by the storeman.

- Ensure the storeman verifies that physical balances match book balances.

- Match supplier invoices with Delivery Orders (DO), Requisition Orders (RQ), and Purchase Orders (PO); code and key them into ACCPAC.

• Process payments to selected suppliers.
• Prepare bank reconciliations.

Requirements:

• Minimum GCE O Level or a relevant accounting qualification.
• At least 3 years of experience in an accounting department.
• Familiarity with ACCPAC accounting software.
• Proficiency in Microsoft Office applications, such as Excel and Word.
• Must be able to start work immediately or with short notice.