JOB DESCRIPTION

· Wireless AP software development and firmware development

· Network communication protocol development

· Embedded system development

· Execution of pre-test for IoT/ Wi-Fi router related certification

JOB REQUIREMENTS

· Bachelor’s Degree or above in Computer Science, Computer Engineering, Electronic, Telecommunication or Networking Engineering

· Familiar with C/C++ and Linux system

· Familiar with networking and embedded system development

· WiFi development experience is an advantage

· Good communication and team working skills

· Good problem solver, ability to think out of the box

· Passion in programming is an advantage

Job Description:

- Perform maintenance, repair, overhaul and servicing (Mechanical)

- Perform lubricant replacement, greasing and flushing for system (Hydraulic)

- Perform wiring replacing, re-routing of harnesses, cabling repair and system testing (Electrical)

- Machinery usage involved overhead crane, buffering machine, hydraulic press, drilling machine & STE etc.

- Working at height (climbing up and down of vehicles)

- Maintain 5S/ housekeeping (Include, sweeping, clearing, and throwing rubbish, washing of parts & vehicles)

Job Requirements:

- NITEC/Higher NITEC in Electrical/ Electronics/ Mechatronics/ Mechanical Engineering preferred

- Competent in use of hand tooling

- Good interpersonal skills, proactive and work well with others

- Preferably with valid Class 3 driving license

Job Responsibilities:
· Accurately and safely perform timely testing of routine and non-routine lab samples in accordance with appropriate GMP, GLP and safety guidelines.

· Accurately maintain laboratory record system of submitted samples (to compile, analyze, evaluate and prepare reports).

· Recognize deviations from procedures, methods, etc., and initiates an investigation as required.

· Prepare certificate of analysis (COA), certificate of ingredients (COI) and health certificate.

· Assist in preparations of statistical reports and trend analysis from data compiled on a daily, monthly, quarterly and annual basis.

· Coordinate with commercial laboratory for samples submission and result release.

· Maintain inventory of all laboratory supplies and consumables - inventory monitoring and control, raise purchase request.

· Maintain competency in all trained areas.

· Adhere to the laboratory quality control policies, document all quality control activities, instrument and procedural calibrations and maintenance performed.

· Be capable of identifying problems that may adversely affect test performance of test results, reporting of test results, correct the problems and immediate notify the superior.

· Engage in training exercise (Eg. ISO 17025 training, proficiency test, ring test) to fulfill compliance requirements.

· Ability to satisfactorily participate in proficiency testing programs.

· Maintain competency in all trained areas.

· Manage the sample retention room.

· Perform all related works as required.

Job Requirements:
· Good communication and interpersonal skills along with strong computer aptitude are essential.

· Meticulous, conscientious and systematic.

· Individual must display a high degree of self-motivation and initiative, as well as, the ability to work well with others.

· Understanding of statistical tools and analysis.

· Strong attention to detail.

· Ability to organize and prioritize multiple tasks.

· Experience with Root Cause Analysis.

· Demonstrated ability to work both independently and as a part of a team.

· Official Working Hours: Mon to Fri: 8am to 5pm, Alternate Sat: 8am to 12noon, Sun: Rest Day

Additional Information:
· The position is full-time non-remote, Monday through Friday, alternate Saturday, with flexibility to support weekends on occasion.

· The job description is not designed to cover or contain a comprehensive listing of activities, duties or responsibilities required of the employee.

· Other duties, responsibilities and activities may change or be assigned at any time.

Element has an opportunity for a Machinist to join our rapidly expanding team. In this role, you will perform a variety of routine and non-routine machining assignments within the department assigned and insures timely and accurate test results under direct supervision.

This role is located in Tuas, Singapore.

Job Duties:

• Uses cutting equipment to prepare specimens for testing as dictated in customer specifications
• Designs, sets-up and performs a variety of machining tasks according to customer specifications and requirements
• Machine samples using milling, grinding, manual lathe and CNC lathe machines
• Help in cutting on bandsaw as required
• Maintaining HSE and 5S standards
• Assist Supervisor in scheduling and managing work schedules as required
• Site work flexibility as and when required
• Flexibility of working timing and shift as scheduled including night shift

Job Description:

• More than 5 years of experience in the machine-shop will be of advantage
• Must possess Diploma or any relevant Certifications
• Flexible to work in shifts or overtime as required by business demands
• Depth of understanding related to machining concepts, measuring instruments and dimensional concepts
• Working knowledge of machine shop safety protocol & 5S requirements
• Flexible to work in other departments & on-site (if required)

HOW TO APPLY:

Interested applicants, please submit your updated resume to [email protected]

Please state your availability, current & expected salaries for processing purpose. All applications will be treated in the strictest confidence. We regret that only shortlisted candidates will be notified.

· Project Planning:Define project scope, goals, and deliverables in collaboration with stakeholders.
Develop detailed project plans, timelines, and schedules.
Estimate resources and budgets for project completion.

· Budget Management:Prepare and manage the project budget.
Monitor financial performance and ensure costs are controlled.
Approve expenditures and ensure cost efficiency.

· Resource Management:Coordinate with architects, engineers, and contractors to ensure project requirements are met.
Procure materials, labor, and services, ensuring quality and adherence to the project timeline.
Ensure the availability and proper allocation of resources (staff, equipment, materials).

· Risk Management:Identify potential risks and develop mitigation strategies.
Address unexpected delays or issues that may arise during the construction process.
Ensure compliance with safety and regulatory standards.

· Team Leadership:Lead and motivate construction teams, ensuring tasks are completed as scheduled.
Collaborate with project stakeholders, clients, and other parties involved.
Communicate regularly with clients and provide project updates.

· Quality Control:Oversee the quality of work throughout the construction process.
Conduct inspections to ensure the project meets design specifications and standards.
Ensure the use of appropriate construction techniques and materials.

· Documentation and Reporting:Maintain project records, including contracts, change orders, and progress reports.
Provide regular updates on project status to stakeholders and upper management.
Prepare project closure documentation, including final reports and as-built drawings.

The School of Materials Science and Engineering (MSE) provides a vibrant and nurturing environment for staff and students to carry out inter-disciplinary research in key areas such as Computational Materials Science, Characterisation Materials Science, Defence Composite Materials, Functional Composite Materials, Energy, Nanomaterials, Low Dimensional Materials, Biomaterials Materials, Biological Materials, Bioinspired Materials and Sustainable Materials.

For more details, please view https://www.ntu.edu.sg/mse/research.

Key Responsibilities:

• Electrochemical process on interface phenomena
• Battery testing under different conditions
• Simulation of scaled up process.
• Interface with machine learning group on data base set up
• Battery safety testing

Job Requirements:

• PhD candidates with strong background in Materials chemistry/Physical chemistry.
• Experience with energy storage system or electrochemical system (Batteries)
• Ph.D in chemistry/ Materials Science/physics
• Encourage initiating activities on battery development, devising, and analytic process
• Experience on machine learning will be preferred
• Good command of oral and written English for research purposes
• Candidate with strong publication/patent records will be preferred

We regret to inform that only shortlisted candidates will be notified.

• MNC, 5 days, Tuas, Transport provided
• $2500 - $2800, Hybrid work arrangement
• AWS, Performance bonus

Responsibilities:

• Handle office facility maintenance, including liaising with vendors
• Monitor and replenish office and workshop supplies (groceries, stationery, corporate gifts, and drinks)
• Vendor & Asset Management
• Coordinate with vendors for regular maintenance and ad-hoc repairs
• Ensure smooth operations of company equipment, including photocopy machines and office appliances.
• Organise staff events such as outdoor lunches, year-end dinners, and other team-building activities.
• Update staff leave records
• Manage monthly utility, phone and internet bills
• Coordinate the printing of corporate materials and name cards

Requirements:

• Minimum 1-2 years of experience in an administrative or office coordination role
• Strong organisational and time management skills
• No experience can apply as on-the-job training is provided
• Proficiency in Microsoft Office (Word, Excel, Outlook)
• Good Communication skills and the ability to liaise with various stakeholders

Interested applicants, please send your resume to [email protected]

MOM License 16C7883 | Reg No. R1109186

Objectives of the position:

The Warehouse Assistant must be a communicative, analytical, and creative team player who can achieve high levels of performance. An individual who is mature and possesses a good attitude with willingness to learn.

Key Responsibilities:

1. Receive and verify accuracy of incoming shipments

2. Sort and place inventory on racks, shelves, or in bins according to predetermined location

3. Prepare inventory for shipment, including packaging and labelling

4. Maintain accurate inventory records

5. Maintain accurate inventory count, perform annual inventory count and submit reports to management

6. Operate material handling equipment (i.e. Forklift, VNA, etc)

7. Maintain good housekeeping and ensure cleanliness of working environment

Skills & Qualification:

1. Minimum 1 year experience

2. Forklift license preferred

3. Working Hours: 5 days, Mondays to Fridays, 8.15 am to 6 pm

Job summary:

We are seeking an experienced Business Development Manager to join our dynamic team in the automotive industry. The successful candidate will play a key role in driving business growth by identifying new market opportunities, establishing strategic partnerships and expanding our client base.

Duties/ Responsibilities:

• Responsible for growth in market share within assigned sales territory (Southeast Asia/India).
• Manage customers' expectations with quick response to customers' queries.
• Provide technical consultation to customers' requirements.
• Develop and manage relationship with customers.
• Prepare costing, quotation and technical proposal.
• Support and lead assigned projects.
• Develop and identify business potentials.
• Perform market potential analysis and competitor analysis.
• Propose and implement sales strategy to meet company's growth and revenue plan.
• Maintain close communication with Regional Key Account Management to align regional strategies.
• Other duties or projects, as assigned.

Requirements:

• Diploma / Degree in Electrical Engineering/Electronics or Business Management or its equivalent.
• 5 – 7 years’ experience in automotive electronics industry, preferably with business development and sales experience.
• Sales / Business development experience in automotive industry, with Southeast Asia or Indian customers.
• Ability to listen and pro-actively react to customer questions and requests.
• Goal-oriented and extremely hard working.
• Self-driven, independent and enthusiastic to succeed.
• Capable of collaborating with teams and achieving results.
• Excellent presentation, oral and written communication skills.
• Good communication in English.
• Proactive, extrovert personality, team player & goal focus.
• Ability to work under pressure in a structured environment.
• Willingness to travel frequently.

Jobs:

(i) Food preparation (wash, cut, dry, reheat, grill)

(ii) Food Packing (packing)

(iii) Good receiving (from suppliers’ driver)

(iv) Good release (to drivers)

(v) General hygiene maintenance

(vii)Stock maintenance (physical count, arrange, labeling and etc)

Requirements:

a.Experience in Kitchen Jobs (Cut, Simple Cook)

b.Team Work

c.Responsible and Commitment

Location: 1 Woodlands Height, Koufu Group HQ, #05-K10, S737859 (Near Woodlands South MRT)

Timing: Mon-Sun (Min. 10am - 2pm) with Flexible OFF days

Meals is included

Job Highlights

• AWS*
• Entitled to OT
• Group hospitalization insurance
• Medical / Leave Benefits
• Working Location: Penjuru
• Start ASAP / Short Notice

*Terms and conditions apply

Job Description

• Order processing - to do GR and GI in SAP and WMS
• Liaising and co-ordinating with customer
• Performing daily/monthly/quarterly cycle count
• Any other warehouse ad-hoc duties

Requirements

• Singaporeans only may apply
• No experience required as on-the-job training will be provided

Interested candidates kindly apply with the latest resume via APPLY NOW

-- ONLY SHORTLISTED CANDIDATES WILL BE NOTIFIED --

Job Purpose

· Providing logistics support to internal/external customers.

· Assisting team lead on daily operations.

Duties and Responsibilities

· Utilize the WMS to create, monitor, and complete all logistics jobs accurately and efficiently, ensuring alignment between the system and physical handling processes. Maintain accurate online data and records to support warehouse operations and compliance requirements.

· Ensure that all jobs are completed within established Key Performance Indicators (KPIs) for invoicing, leveraging the WMS to streamline processes and meet deadlines effectively.

· Generate reports and analyze data from the WMS to track key performance indicators (KPIs), such as job completion and invoicing. Provide insights and recommendations based on data analysis to improve operational efficiency, customer service, and overall warehouse performance.

· Serve as the primary user and administrator of the WMS for updating warehouse operations and order fulfilments

· Provide excellent Customer Service and be the main Liaison Office for key customers, appointed forwarder and warehouse for related shipment handling Operations and co-ordinate activities between stakeholders via Container Transport Operation staff, Customers, BSL inter-departments.

· Plan container devanning operations and staff deployment with the aim of ensuring business continuity and realizing service and business excellence

· Ensure regular market research on shipping related cost to ensure all shipping cost are within control and stay competitive

· Take on other job tasks as and when assigned by the superior

Qualifications and Requirements

· Fresh candidate welcomed.

· Be charismatic with good personal attribute; patient, humble, caring, attentive, good listener, good initiative, empathetic and speak tactfully.

· Ability to work harmoniously with others in the team.

· Ability to provide admin support, billing and work with “eye for details”.

· Ability to speak and write simple English.

· Minimum GCE “O” level with simple office admin and customer service experiences.

Working Conditions

5.25 Working days per week

Job purpose:

• Responsible for the execution of export/ import haulage arrangement against a PO, with focus on cross boarder shipments.
• Ensure smooth haulage arrangement, i.e. ensure there is truck to execute order as well as the manufacturers are following through with arrangement.
• Review and explore opportunities for improvement against, but not limited to established project plan, and against actual operation

Decision accountabilities:

• Meet the KPI for Haulage
• Understand the internal customers’ requirements and priorities and manage the day to day operation of job expectation.
• Work with all stakeholders of PO to deliver a PO within agreed time

Key responsibilities:

• Process the order in the system as per SOP
• Trouble shoot operational issues to ensure the haulage arrangement is on time. This may go beyond official working hours.
• Update and maintain the master data for haulage in the system to ensure that it supports the order processing.
• Follow up and ensure all the custom documentation is organized in accordance to the respecting export/ import requirements of the country.
• Ensure timely and accurate filing of documentation in accordance to internal and external audit requirement.
• To plan and organize weekly pick up schedule to factories and arrange delivery order to trucker for the markets, mainly MYS – SG
• Monitor trucker performance to ensure the factory pickup schedule and delivery to port is executed according to agreed timeline.
• Arrange consolidation of CFS orders to bonded warehouse.
• Ensure zero penalties from Custom Authority, carriers or 3PL due to internal issue.
• Work/Communicate closely with Logistic Manager, Account Management and other key stakeholders, across different HAVI Freight Management business units

Physical work environment:

• DC work environment.
• Overnight standby will be required, time off will be given the next day.

Job Description:

- Plan, organise and execute the quality assurance activities at in-process and final QA process stages

- Prepare acceptance test plans and work instructions for the inspection and test of the first article and series MRO (Maintenance, Repair and Overhaul) units

- Plan and execute acceptance tests for first article and series production units

- Identify special skills and special test equipment that are to be made available or acquire for acceptance of the products

- Identify and evaluate quality problems, relating to the product, process and quality system, to initiate, recommend or provide solutions

- Initiate actions to prevent the occurrence of any non-conformity relating to the product, process and quality system

- Conduct failure investigation, monitor and ensure closure of corrective/preventive action

- To perform inspection of MRO units

Job Requirements:

- Diploma/ Degree in Mechanical Engineering with basic hydraulic knowledge

- Possess Class 3 driving license

- Knowledge of military vehicles or armament will be added advantage

- Willingness to work in workshop environment

Job Responsibilities:

• Lead and direct cross-functional team in program execution
• Ensure proper qualification of new projects and successful implementation of programs in the production/manufacturing unit
• Track and monitor project progress to ensure project schedules and cost objectives are met
• Actively follow on sales leads and take lead in business development
• Serve as primary technical contact with customers on strategic or politically sensitive issues
• Provide support to BD manager in generating quotation for molding projects involving new toolings
• Provide customer support and perform in BD activities to direct customers; Serve as primary technical contact with customers on strategic or politically sensitive issues
• Work with Manufacturing on developing and establishing workflows and production concepts (to optimize production efficiency &meet customers’ requirements)
• Identify and specify engineering requirements for new projects
• Initiate equipment procurement activities for new projects when needed (with Purchasing)
• Plan and execute tooling qualification activities with supporting groups to achieve successful project execution
• Take reasonable care of workplace health and safety; abide by all EHS policies and procedures; cooperate with Management and colleagues in EHS initiatives

Job Requirements:

• Diploma/ Degree in Mechanical Engineering or related
• Minimum 3 years of working experience in project management & production process
• Plastic injection moulding and mould assembly background preferred

Note

The above statements reflect the general tasks, duties, activities and/or responsibilities necessary to describe this position and is not intended to set forth all of the specific requirements of the job. These job duties/responsibilities may change or vary in response to business needs.

Office Location: Boon Lay

Working days: 6 days weekly (Monday - Saturday)

Working hours: 8am to 5pm

OFF on Sunday & Public Holiday

Salary Package:

• Basic salary + OT pay
• AWS + Performance Bonus

Benefits:

• Company vehicle provided (10ft. freezer truck) Vehicle can be driven home
• Cashcard, Season parking & Diesel Provided
• Medical and Leave Benefits

Job Scope (Responsibilities):

• Safely and timely deliver frozen products to customers
• Maintain positive attitude with customers
• Load and unload cargo
• Able to carry up to 15kg ctns (if required)
• Skill in using GPS
• Follow traffic laws
• Refuel and clean vehicle
• Inspect trucks and record issues
• Keep activities log and log hours

Requirements:

• Must have a valid Class 3 driving license
• Prefer Class 4 driving license
• Ability to work independently

• To liaise and collaborate with the Commercial Manager and Project Manager and construction teams in all aspects of our contractual activities. 
• Take ownership for maximising commercial results.
• To represent and serve the best interests of the company to meet client expectations and encourage repeat business. 
• To ensure optimum commercial return is achieved for the project. 
• Liaise with the estimators at hand-over. 
• Prepare the cost / value reconciliation reports accurately and in accordance with company procedure.
• Prepare and agree interim valuations at the agreed dates to gain the best commercial advantage for the company. 
• Prepare, and in conjunction with senior management agree final account with client’s representative.
• Manage Job specific procurement.
• Ensure sub contract orders are prepared in accordance with company procedure with reference to the date given on the procurement schedules and /or in accordance with the contract programme having achieved the appropriate approvals.
• Maintain control of sub contractor’s accounts and minimise the cost of any variations.
• Reviewing weekly productivity of teams.
• Monitoring / scrutinising of weekly costs and productivities, and reporting on same. 
• Highlighting areas of concern / loss on any part of the contract. 
• Monitoring of contract charges and notification to sub-contractors. 
• Sub-contractor re-measurement, interim and final account payments.
• Compiling the variation log and signing off on variations with Client Project Q.S. 
• Cost monitoring and reporting while attending all monthly cost reporting meetings.
• Cash flow forecasting for projects and issuing monthly reports to commercial manager.
• Working closely with Finance & Commercial in maximising profit on the contracts

Job Description

• Develop detailed designs, layouts, and specifications for piping systems, ensure proper pipe support design based on piping loads, thermal expansion, and seismic considerations.
• Identify appropriate materials, ensure material compliance with project specifications, applicable codes, and standards such as ASME, ANSI, and local regulations.
• Work closely with process, mechanical, civil, and electrical teams to ensure piping systems are integrated seamlessly with other systems
• Coordinate with procurement, construction, and commissioning teams to ensure timely delivery and installation of piping systems
• Prepare piping-related project deliverables including technical drawings, specifications, data sheets, and material take-offs
• Liaise with suppliers for quotation and technical evaluation of quotation. Review and approve piping construction drawings, isometrics, and support drawings
• Lead piping design reviews, coordination meetings, and vendor technical discussions
• Manage piping engineering scope, schedule, and budget, ensuring project milestones are met

Requirements

• Degree in Mechanical / Piping Engineering
• For degree holder, minimum 5 years of experience in piping design and engineering. For Diploma holder, minimum 8 years of experience is required.
• For senior position, candidate must have at least 10 years of experience, including leadership or project management experience.
• Strong expertise in piping materials, piping arrangement, stress analysis, and design of piping systems
• Must be a self-starter and be able to work with minimal supervision, make sound decisions, take independent action, and provide focused solutions to assigned projects
• Possess strong inter-personal and communication skills and be able to work well with people at all levels in the organization
• Knowledge of international and local standards (e.g., ASME, ANSI, BS EN, PUB Singapore guidelines)
• Must have advanced computer literacy in commonly usedsoftware applications such as Navisworks, Bentley View, AutoCAD, piping engineering software, and MS Office
• Experience in process plant (such as wastewater treatment plant, sludge incineration plant, etc.) is preferred

Job Description

• Supervise and coordinate site installation works with in-house supervisor and foremen to ensure the project schedule is met
• Attending site coordinate meetings with main-con, consultants and other contractors
• Hands-on and technical assistance for FP & Plumbing system installation and troubleshooting on site
• Prepare material requisition for all FP & Plumbing equipment and materials
• Prepare work programme for FP & Plumbing works with material delivery and installation activities in accordance with the project programme
• Analyse, manage and track project costs against budget
• Carry out testing and commissioning, combined services testing for TOP/CSC
• Handover of completed work activities with as built drawings and O&MM to respective authorities or clients to in timely manner and delivery with desired quality standards
• Participate in in-house engineering design works of FP & Plumbing system, including detailed design, calculation, shop drawings, pipe sizing, equipment selection, etc
• Review 3D BIM model and ensure correct the installation details, compliance with design specifications and guidelines
• Participate in liaison with FP & Plumbing suppliers for quotation, carry out equipment selection, technical and commercial evaluation
• Prepare material submittals for FP & Plumbing system to the Consultant for approval
• Coordinate with project schedule in organizing Purchase Order, arrange timely delivery of all FP & Plumbing equipment and materials
• Participate in tender preparation for new projects

Requirements

• Min Diploma in Mechanical Engineering
• Min 3 years of relevant working experience in building construction industry, preferable in handling FP & Plumbing works
• Fresh graduate are welcomed to apply
• Proficient in AutoCAD and Revit
• Excellent project management skills, including the ability to manage timelines, budgets, and resources effectively
• Experience and relevant knowledge in FP & Plumbing design calculations and Project Management
• Tender Bidding and Project cost Analytical and Critical Thinking
• Proactive and willing to learn and take on new challenges
• QP/PE, Green Mark manager or other BCA/SCDF/PUB authority certification is an advantage

Basic information:

• Working hours: Mon - Fri 8.30am - 6.30pm
• East area (Loyang)
• Training provided

Job scope:

• Coordination and collaboration with Purchasing and Shipping department to ensure smooth and seamless operation
• Mainly administrative work with regards to processing of local sales orders and delivery schedule
• Checking of freight and courier charges for customers

Job requirement:

• Candidate with experience in Microsoft Excel, Word, Outlook will be an advantage

For interested candidates, please submit your updated resume by using the APPLY NOW BUTTON

By submitting your personal data and/or resume to us in connection with your job application, you will be deemed to have agreed and consented to us in collecting, using, retaining, and disclosing your personal data and/or resume to prospective employers for the purpose of the evaluating, processing and administration by company relating to this job application.

*We regret to inform that only shortlisted candidates would be notified*

We wish you all the best in your career search.

Zen Career Pte Ltd | 24C2559
Wong Kaili (Kylie)| R21100484

NTU Facility for Analysis, Characterisation, Testing and Simulation (FACTS) invites applications for the position of Research Fellow/Senior Research Fellow.

Key Responsibilities

• Responsible for running the Small/Wide Angle X-ray Scattering (SAXS/WAXS) facility and the thin film XRD. The role mainly covers instrument management, user support in terms of training, and consultation, to enable a broad user base to use the machines efficiently and safely.
• Conduct maintenance on the above machines, liaising with vendor engineers and trouble-shooting regular problems and issues.
• Conduct data analysis related to SAXS/WAXS and thin film XRD experiments.
• Deliver courses on SAXS/WAXS and thin film XRD covering introductory and topical or advanced courses that are relevant for facility users.
• Organise workshops and conferences to provide support for users, in collaboration with external vendors and other organisations.
• Provide consultancy for various ongoing university projects on related subjects on SAXS/WAXS and thin film techniques. Write up experimental reports and paper sections in accordance to the work done.
• Fulfil any other assigned duties as needed.

Job Requirements

• PhD in Materials Science, Physics, or a related field.
• Proficient in conducting SAXS/WAXS analysis in transmission and in grazing incidence (GISAXS/GIWAXS). Additional experience related to thin film XRD analysis such as X-ray reflectivity (XRR), crystal orientation mapping and high resolution XRD, are highly beneficial.
• Experience doing in-situ measurements, including but not limited to heating/cooling will be a plus.
• Strong communication and organizational skills are essential.
• Excellent command of written and verbal English.
• Capable of working collaboratively in a team as well as independently

We regret that only shortlisted candidates will be notified.

Job Title: Class 4 Driver - 18ft/24ft Truck

We are seeking a skilled Class 4 Driver to join our team in Singapore for a full-time position. The ideal candidate will have at least 2 years of experience in driving and possess expertise in vehicle maintenance, communication skills, vehicle inspection, safety protocols, loading and unloading tasks. This is a full-time, on-site position that requires driving across various locations in Singapore.

Key Responsibilities:

• Follow delivery schedules and ensure timely & accurate delivery of goods
• Ensure all safety & company's guidelines are adhered to
• To achieve no lateness for delivery and reporting to work
• Record and submit Cash-card
• Milledge reports to the superiors in a timely manner weekly
• Perform routine vehicle maintenance to ensure optimal performance
• To upkeep cleanliness of vehicle at all time
• Take responsibilities for vehicles and goods handed over
• Load and unloaded goods, deliver to the customer
• Prepare, inspect & operate delivery vehicle

Skills and Qualifications:

• Possess a Class 4 Driving License
• Minimum qualification of secondary education
• At least 2 years professional driving experience
• Able to carry goods
• Able to read and write simple English for goods checking against delivery order (DO)
• Possess a positive and professional attitude
• Good team player
• Work independently and follow safety protocols
• Strong understanding of road safety and traffic laws.
• Immediate start work will be an advantage

Others:

Organisation Type: Logistics

Job Type: Full Time

Working Location: Island-wide, Singapore

Working Hours: 5.5 days (Monday to Friday: 830am to 530pm, Saturday: 830am to 1230pm)

If you meet the requirements and are passionate about driving and ensuring safe transportation of goods, we encourage you to apply for this position.

Job Description:

• Make travel arrangements & prepare necessary travel documents for GM.

• Maintain the GM’s diary

• Prepare GM claims.

• Prepare meeting minutes

• Arrange appointments with Suppliers, Customers, Inter-department & staff.

• Coordinate with all Managers for monthly management meetings & inter-department meetings.

• Coordinate with all departments in any matters with regard to the GM.

• Coordination of Trading Meetings & Consolidations of Reports.

• Assist in maintaining the Customers’ Accounts, prepare quotations and customers' A/R reports of those under the charge of the GM.

• Follow-up on all outstanding matters by all departments & branches of the Trading Division.

• Any others duties as assigned by GM.

Job Requirement:

• Minimum Diploma or equivalent

• Minimum 2 years of relevant working experience

• Possess good communication skills

• Independent and meticulous

Overall Job Purpose

Responsible for configuring, implementing, and maintaining Project AVEVA Net/AIM and ISM instances. The incumbent will play a pivotal role in Project data capture, verification, and handover.

Core Responsibilities

• Be the Single Point of Contact for all matters related to setting up, maintaining, administering, upgrading, and troubleshooting the AVEVA NET system deployed on all MODEC

• Coordinate with the engineering disciplines assigned to the project and work closely with project management, procurement, HSE, QA/QC, operations, and the construction team. Meet or, where possible, exceed on-time deliverables while maintaining quality and safety in each activity.

• Establish and maintain the creation of a Class Library and define its structure and mapping techniques in ISM.

• Develop efficient data capture, validation, loading and handover work processes to meet Client/Project schedule requirements.

• Establish new project portals that effectively reflect client/project class libraries, data structure, and handover requirements.

• Ongoing Gateway configuration, maintenance, and development of AVEVA NET portals.

• Generation of Query Forms, SSRS and BI reports communicating data discrepancies, omissions, completion trending and status

• Raise the profile of information management and create a data-centric culture via effective portal development and deployment.

• Shall be capable of developing work instructions for users of AVEVA NET.

• Must understand company goals and implement management directives and policies.

• Anticipate potential problems and take preventive actions.

• Support the Product Manager in planning and delivering AVEVA NET solutions on projects.

• Shall train the MODEC users on the AVEVA NET application in projects.

• Interface with all disciplines to clarify/explain AVEVA NET intent and suggest alternatives when

• Contribute to continuous improvement of company work methodology/procedures.

• Conclude all open issues amicably.

Educational Qualification:

Certification(s):

• Training in AVEVA NET administration

Relevant Experience:

a) 5-10 years’ experience applying AVEVA NET in onshore/offshore Oil & Gas areas or FPSO line(s).

b) AVEVA NET/AIM and AVEVA ISM administration and implementation.

c) Be fully proficient in exception handling between the AVEVA system with associated Gateways and the Client system

d) Have extensive knowledge of AVEVA registers gateway interface with Client system

e) Experience in mapping Company data and document structures to Client structures. Have an in-depth understanding of FEED & Detailed Design deliverables, their execution methodology and their interdependencies with one another.

f) Have previous experience in engineering information management.

g) Possess previous experience with AVEVA Net Portal and ISM development and administration skills on Oil & Gas Projects, specifically for Major Capital Projects.

h) Knowledge of Engineering Design software like AVEVA E3D and AVEVA Engineering is a plus.

i) Possesses good working knowledge of the Oil & Gas Industry, including EPCs and owner-operators (preferred but not mandatory).

j) Shows evidence of good organizational skills.

k) Demonstrates ability to take the lead.

l) Good communication skills.

m) Commitment to take responsibility.

If the chemistry is right, we can make a difference at LANXESS: speed up sports, make beverages last longer, add more color to leisure time and much more. As a leading specialty chemicals group, we develop and produce chemical intermediates, additives, specialty chemicals and high-tech plastics. With more than 13,000 employees. Be part of it!

Job Highlights:

Interface Creation & Monitoring: Develop and oversee interfaces in SAP PI/PO and SAP Integration Suite, ensuring seamless data flow across systems.

Ticket Handling & Issue Resolution: Manage 1st and 2nd level support tickets for SAP PI/PO and Integration Suite, diagnose issues, and perform corrective actions in collaboration with service providers.

Recurring Issue Analysis: Conduct root cause analysis for recurring issues, document findings, and recommend corrective actions to prevent future occurrences.

Team Collaboration: Collaborate with internal teams and external partners to address integration challenges and ensure timely resolution.

Adherence to Processes: Follow established procedures, contribute to documentation, and support knowledge sharing to promote best practices.

System Stability & Checks: Perform post-restart system checks to ensure application stability and troubleshoot issues, maintaining uptime after maintenance activities.

Workplace and End-User Service & Support (Global/Regional): Provide expert knowledge and technical assistance to IT-PO teams and services across global/regional operations.

IT Project Support (Regional/Local): Support IT projects within the Asia Pacific region, contributing to successful implementation and operations.

Job Requirements:

Education: Bachelor’s degree in Information Technology, Computer Science, Engineering, or a related field. SAP certification in relevant modules (e.g., SAP PI/PO, SAP Integration Suite) is a plus.

Experience: Minimum 3-5 years of hands-on experience working with SAP PI/PO, SAP Integration Suite, or other SAP modules. Proven experience in managing and troubleshooting integration scenarios across SAP and non-SAP systems.Familiarity with root cause analysis and problem management practices to resolve recurring system issues.

Communication Skills: Excellent verbal and written communication skills, with the ability to influence and collaborate effectively with internal teams, customers, and stakeholders.

What We Offer You

• Compensation: We offer competitive compensation packages, inclusive of a global bonus program and an individual performance bonus program.
• Comprehensive Benefits: We provide a variety of benefits to support your financial security, health and wellbeing including retirement plans, health programs, life insurance and medical care.
• Work-Life & Flexibility: We support you in maintaining a balance between working hours and personal life. With our global “Xwork” program, we offer flexible working arrangements in all countries in which we operate.
• Training & Development: We are committed to your professional and personal development and encourage you in the ongoing pursuit of education, training and knowledge through both formal and informal learning .

Diversity: For us, talent matters, we welcome everyone who commits to our values. We strongly believe that including diverse perspectives makes us more innovative and enhances our competitiveness. Therefore, we embrace the uniqueness of every single individual and are truly committed to supporting our people in developing their individual potential.