Lab Officer/ Research Engineer

Job Description:

Be part of an exciting FAB Operations Team working on cutting-edge advanced packaging process technologies.
This position is based in Singapore.

Responsibilities:

• Operate multiple type of semiconductor equipment in cleanroom environment.
• Ability to use computer-based programs and applications to perform daily work/duties.
• Operate equipment based on the required process specifications (e.g. procedures, change notifications, etc.).
• Participate actively and be responsible in assigned on-the-job assignments and other required trainings when requested.
• Provide machine operations coverage and backup supports when necessary.
• Adequate understanding of the Equipment in-charge, monitor performance, timely communication with Engineers-in-charge to perform equipment errors recovery promptly when necessary.
• Demonstrate excellent teamwork to promptly execute process sequences and data collections if required.
• Always follow safety protocols & rules in the Clean Room.
• Ensure 6S in the work environment and promptly report hazards/ suspicious/ abnormal activities or personnel if any identified.
• Address potential areas for improvements such as wafers processing cycle time, Equipment utilization, Safety/ Compliances, and cost savings.

Experience:

• Diploma in MicroElectronics/Electrical/Mechanical/Chemical Engineering.
• Basic understanding on semiconductor process is preferred.
• 1-3 years of experience in semiconductor processes (Diffusion, Wet Clean, CMP, ECP, Litho, Etch, CVD, PVD, etc.) will be added advantages.
• Must be a self-starter, dependable and highly motivated

• Position : ALL WELCOME - Driver cum Technician (Sanitary Installation/Plumbing) – Up to $3,500 + AWS
• Location : Island-wide Singapore
• Working hours : Working hours : Monday to Friday | 9am to 6pm | Saturday 9am to 1pm
• Salary (commensurate with experience) : Up to $3,500 + Performance Bonus + Annual Leaves + Medical Benefits
• Duration : Permanent
• Industry : Bathroom Fittings

Responsibilities:

• Perform accurate and on-time delivery to the customers.
• Ensure items are delivered and installed in a professional manner.
• Ensure professional communications and feedback for any delivery issues.
• Collect payment (when necessary) from customers and ensure accurate recording of delivery orders.
• Installing, maintaining and repairing plumbing systems and fixtures.
• Fitting and repairing various household appliances.
• Cutting, welding and assembling pipes, tubes, fittings, and fixtures.

Requirements:

• Able to manage weight of at least 20 kg.
• Ability to perform simple plumbing & installation - rest will be trained on the job
• Have Class 3 license
• ALL WELCOME!!

Email to: [email protected]

Do visit www.facebook.com/search.personnel and https://www.instagram.com/search.personnel for more job listings and career tips!

***We do not charge our candidates any referral fee nor bind them with any contract.***

Chloe Ong

Senior Consulting Manager (APAC)

Reg no.: R22105510

EA No: 13C6684

A Research Officer position is immediately available at the Stem Cells and Diabetes Laboratory. Dr Adrian Teo's laboratory is interested in leveraging on stem cell technology to study mechanisms underlying diabetes and metabolic diseases. Reference: www.adrianteolab.com.

Qualifications / Requirements:

• Degree in Biological Science and Life Science disciplines or equivalent
• Deep commitment and interest in research, demonstrated from previous research experience
• Minimum 6 months prior research experience in the Biomedical field
• Experience with mammalian cell culture and molecular biology techniques
• Experience with animal work and surgical techniques
• Experience with mammalian stem cell work will be valued
• Excellent organizational and interpersonal skills
• Highly motivated, passion for science, committed to laboratory work and able to work flexible hours
• Ability to multitask, work independently and also as part of a team
• Excellent communication (verbal and written) and presentation skills
• Experience in Flow Cytometry, Immunoprecipitation techniques, RNA-seq, Mass Spectrometry and bioinformatics will be valued

Interested candidates are invited to send a brief cover letter detailing research motivation, curriculum vitae, and the names and email addresses of referees.

• Position :Service Technician(CCTV/Security System)
• Location : Islandswide- Office in Outram
• Working hours : 5 days work week;(8.30am, -6.00pm)
• Salary (commensurate with experience) : Up to $4200 gross ($3500Basic +Transport allowance $400-$750) AWS + Overtime + Performance Bonus + $60 Mobile reimbursement + Birthday leave + Health insurance + allowance
• Duration : Permanent
• Industry : Security system

Main Responsibilities:

• Execution of service and maintenance workflow.
• Liaise closely with client representatives on all service/maintenance related issues.
• Mentor a team of service team members.
• Assisting the supervisor in employing teams on service deliveries and distribute responsibilities.
• Manage day-to-day client interactions and expectations for optimal results.
• Provide support to supervisor in ensuring the timely delivery and completion of troubleshoot and service/maintenance of security systems at clients’ premises.
• Familiarise yourself and deliver customer satisfaction base on each client's business, organization and objectives.
• Ensure that works carried out are in compliance with the Workplace Safety and Health Act.
• Perform any other technical tasks as and when required.

Requirements:

• Min Nitec in Electrical/Electronic Engineering with at least 2 years working experience.
• Knowledge and hands-on experience in security systems such as Integrated Security Management Systems, Card Access Control Systems, Intrusion Detection Systems and CCTV systems is a must.
• Knowledge in IT/Network/Server is an added advantage.
• Independent, self-motivated individual whom is able to work under minimum supervision.

Email me at [email protected]

Do visit www.searchpersonnel.com.sg for more job listings.

***We do not charge our candidates any referral fee nor bind them with any contract.***

Joie Chang

Deputy Consulting Director

Reg no.: R2090601 | EA No: 13C6684

The Pest Control Technician conducts inspections at clients' premises for potential pest infestations. He/She performs pest control tasks such as fogging, misting and baiting. He/She ensures the safety operation of pest control equipment and use of chemicals. He/She explains problems to clients and shares solutions with them. He/She is required to work outdoor at times. He/She travels from place to place to conduct pest control activities.

• Check place for pest infestation.
• Do pest inspection reports.
• Find areas of pest infestation and ways to deal with the problem.
• Guide clients on proper housekeeping ways.
• In charge of pest control equipment.
• Inform clients on likely causes of pest infestation.
• Take proper pest control actions to solve problems found.
• Use chemicals safely on affected areas

- 6 days work week

- Minimun Diploma

- 3 years experiences in relevant industry

• Position : Class 3 Driver cum Technician (Sanitary Installation/Plumbing) – Up to $3,500 + AWS
• Location : Island-wide Singapore
• Working hours : Working hours : Monday to Friday | 9am to 6pm | Saturday 9am to 1pm
• Salary (commensurate with experience) : Up to $3,500 + Performance Bonus + Annual Leaves + Medical Benefits
• Duration : Permanent
• Industry : Bathroom Fittings

Responsibilities:

• Perform accurate and on-time delivery to the customers.
• Ensure items are delivered and installed in a professional manner.
• Ensure professional communications and feedback for any delivery issues.
• Collect payment (when necessary) from customers and ensure accurate recording of delivery orders.
• Installing, maintaining and repairing plumbing systems and fixtures.
• Fitting and repairing various household appliances.
• Cutting, welding and assembling pipes, tubes, fittings, and fixtures.

Requirements:

• Able to manage weight of at least 20 kg.
• Ability to perform simple plumbing & installation - rest will be trained on the job
• Have Class 3 license
• ALL WELCOME!!

Email to: [email protected]

Do visit www.facebook.com/search.personnel and https://www.instagram.com/search.personnel for more job listings and career tips!

***We do not charge our candidates any referral fee nor bind them with any contract.***

Chloe Ong

Senior Consulting Manager (APAC)

Reg no.: R22105510

EA No: 13C6684

ENVIRONMENT:

ENGIE is a global energy and services group, focusing on three core activities: low-carbon power generation, global networks, and customer solutions. Driven by its ambition to contribute to a harmonious progress, ENGIE takes up major global challenges such as the fight against global warming, access to energy for all, and mobility, and offers our residential customers, businesses and communities energy production solutions and services that reconcile individual and collective interests.

ENGIE Lab Singapore is the research centre of ENGIE for Asia-Pacific. ENGIE Lab Singapore brings the technical expertise of ENGIE Research in APAC by developing local expertise leveraging on ENGIE Research networks and allowing access in the region to all the technical expertise developed by ENGIE Research in Europe. Bridging the gap between ENGIE Research and business units ENGIE Lab Singapore play a key coordinator/local technical support role in balancing the R&D effort and the business needs for the Group.

Based in Singapore since 2015 ENGIE Lab Singapore primarily addressed 3 technological areas: Smart-Grid, Future Industries and Cities & New Gases. In 2020 the Lab refocused its strategy to stay in line with group strategy and local context and strengthen its expertise in cooling, green data centres, and local energy communities including the REIDS-SPORE multifluid multi-thematic platform.

REPORTING LINE:

· Research Program Manager

ROLE DESCRIPTION:

You will join the R&D team specifically responsible for supporting and executing various research projects/tasks related to electrical power and controls for various applications Among the R&D projects, the support on the continuous development of an energy management system, along with other electrical and control systems (inverter controller, PLCs, etc.) is critical. As a senior research engineer, you will be responsible for leading and executing various projects and tasks, both within ENGIE Group’s research portfolio, as well as innovative and commercial projects for the local business. The role will require the planning, design, and implementation of projects related to the integration of high- and low-level system controllers, and the concept design of low-voltage electrical systems which may require close collaboration with other disciplines within ENGIE Lab such as cooling and fuel You will also be responsible for guiding junior engineers and interns for respective projects under your purview, and for supporting the program managers on technical topics related to electrical engineering and controls for various energy systems and end-users such as data centres. As a senior research engineer you will also be responsible for supporting activities on our research and demonstration platform and pilot testing sites

DUTIES AND RESPONSIBILITIES:

· Propose, plan, and conduct research works concerning electrical and controls aligned with the direction of the group R&D objectives;

· Support strongly on the continuous development of the energy management system within the group to be integrated with all peripheral control systems;

· Support physically and technically the demonstrator projects locally in Singapore;

· Guide and lead junior engineer(s) and interns to conduct research and commercial works, ensuring timely deliverables in good quality;

· Guide and execute coding and integration projects with the support of junior team members;

· Interact with European experts of different disciplines to support local research and other works;

· Engage with partners to work on collaborative research as well as to develop further collaborations;

· Support technically the engagement with local business entities within the group on their commercial projects;

· Perform benchmark, technical & economic analysis and testing of innovative solutions;

· Perform techno watch to identify innovations and new solutions/technologies;

· Support Site Operational Manager in coordinating different parties for site related research activities (internal and external);

· Report weekly to your manager.

JOB REQUIREMENTS:

· Minimum Master’s Degree in Electrical and/or Controls Engineering;

· Minimum of 5 years working experience in an energy-related industry;

· Must understand and have a strong interest in research, development and innovation in the low carbon energy industry, with an emphasis smart grid, data centres, battery energy storage systems, grid demand response, multi-energy/utilities system

· You have relevant engineering, data analytics, and/or programming skills needed to support research works;

· You have a logical and algorithmic mindset, able to work on software development tasks;

· You are able to handle works both in an agile project and a conventional waterfall industry project;

· You have the problem-solving skills that outline a clear methodology towards objectives;

· You have the leadership skills to lead junior engineers to generate high-quality deliverables;

· You are able to work in a team as well as independently depending on the scope of different projects;

· You are able to work in a multi-cultural team with respect and understanding;

· You are proactive and resourceful;

· You are fluent in English.

· Additional background and experience in control theory and mathematical optimisation is a plus;

· Working experience in the data centre. Integrated solutions, or power systems industry is a plus.

OTHER REQUIREMENTS:

· Resourceful, positive and solution-oriented attitude with problem solving skills and a ‘can do’ approach;

· Proactive and independent, able to independently drive project progress with minimal supervision;

· Adaptable and able to support a wide spectrum of topics/activities as necessary;

· Open and passionate about new technologies and innovations in energy sector;

· Customer oriented and able to establish link between R&D, innovations, and applications in business;

· Comfortable to work on project sites;

· Excellent team player with good interpersonal and communication skills (verbal and written) to function effectively in a multi-cultural environment;

· Organized, high attention to detail and accuracy;

· Able to handle multiple assignments without losing oversight in a timely manner.

LOCATION:

· Singapore

OUR COMMITMENTS AND HR POLICIES:

ENGIE commits to enhance and develop the human capital of the Group in all its diversity by implementing an open and innovative human resources policy that creates value for everyone in the company and all its customers.

For more details, please visit https://www.engie.com/en/commitments/commitments-hr-policies

PRODUCT AREA

Behind everything our users see online is the architecture built by the Technical Infrastructure team to keep it running. From developing and maintaining our data centers to building the next generation of Google platforms, we make Google's product portfolio possible. We're proud to be our engineers' engineers and love voiding warranties by taking things apart so we can rebuild them. We keep our networks up and running, ensuring our users have the best and fastest experience possible.

JOB DESCRIPTION

The Data Center team designs and operates some of the most sophisticated electrical engineering, mechanical engineering and HVAC systems in the world. Facilities Technicians at Google data centers operate, monitor and support physical facilities conditions. Some of these duties will include heating and cooling of air and water, power supply, generators, UPS systems, electrical distribution and control and monitoring systems. You regularly help inspect, maintain and repair various data center systems such as piping and non-critical electrical or mechanical system components). You provide daily assistance to senior technicians as you read blueprints/schematics, conduct tours of systems and assess their working order.

As an advocate for best practices, you develop creative approaches to reducing operational costs while improving overall data center efficiency. You ensure that environmental and safety standards are consistently met, identifying problems and making repairs quickly. In emergency situations or abnormal conditions, you manage data center performance issues and outages to minimize the recovery time from failures.

Qualifications

JOB RESPONSIBILITIES

• Operate, maintain, troubleshoot, and repair electrical equipment in a Data Center environment. Provide Root Cause Analysis (RCA), recovery, and prevention actions for service failure.
• Prepare and execute operation procedures, respond to work request/service failure, and provide operational and technical expertise in required areas. Coordinate vendor support in repairs/replacement and support project implementation (site acceptance tests, factory acceptance tests, site inspection for defects, etc.).
• Improve site WUE and PUE, operational efficiency, and minimize environmental impact. Develop a good understanding of the infrastructure design and sequence of operation.
• Prepare and conduct training/sharing to the team. Ensure safety rules and regulations associated with operating infrastructure.

MINIMUM QUALIFICATIONS

• Associate's degree, trade school certification, verifiable training in a relevant technical field, or equivalent practical experience.
• Experience with electrical, mechanical, and controls systems including: Feeders, Transformers, Generators, Switchgear, UPS systems, ATS/STS units, PDU/PMM units, Chillers, Air handling units, and CRAC units.
• Experience in troubleshooting.
• Ability to work non-standard, on-call rotation weekend hours.

PREFERRED QUALIFICATIONS

• Electrical Technician's Licence.
• Experience troubleshooting for electrical systems.
• Knowledge of industrial networking and coordinating with others in order to determine problems and implement solutions.
• Familiar with SCADA, Power monitoring system, building monitoring system, and PLC programming.
• Ability to work in varying outdoor temperature conditions and perform material handling (lifting/shifting) to work on platforms, ladders, and under raised floors.
• Ability to learn quickly and address issues as they arise during normal operations or during emergency conditions and follow the site’s environmental health and safety policies.

• Position : Lift Technician (Own Motorbike) – No Experience Required, All Welcome!
• Location : Islandwide - Office at Joo Seng
• Working hours : 5.5 Days Work Week - Monday to Friday: 8.30AM to 5.30PM, Saturday: 8.30AM to 1.00PM
• Salary (commensurate with experience) : Up to $2,500 Basic + OT + AWS + Performance Bonus + 7 Days Annual Leave (Additional 1 day every year, capped at 14 Days)
• Duration : Perm
• Industry : Elevator Industry

Responsibilities:

• Perform maintenance servicing, parts replacement and minor repair work to lifts
• Perform 24/7 callback service on rotating shifts

Requirements:

• Minimum NITEC in Mechanical, Electrical /Electronic Engineering or Building Environment (Vertical Transportation) or equivalent can be considered
• Own motorbike
• Willing to be on 24/7 standby
• No Experience required, training will be provided

Email to: [email protected]

Do visit www.facebook.com/search.personnel and https://www.instagram.com/search.personnel for more job listings and career tips!

***We do not charge our candidates any referral fee nor bind them with any contract.***

Jeslyn Tan

Senior Consulting Manager (APAC)

Reg no.: R21101247 | EA No: 13C6684

Thank you for your interest in this position. Our shortlisting period is 3 working days. Only shortlisted candidates will be contacted for further consideration.

If you do not receive communication from us within this timeframe, it's likely that your application has not been shortlisted by our client. In such cases, we recommend that you continue your job search to maximize your opportunities. We wish you all the best and should we have any suitable roles that match your experiences/ qualifications/ preferences, we will reach out to you.

1. Position

Sequencing Lab Technician (CES and/or Long Read)

2. Responsibilities:

• Operating a computer-based laboratory information management system, recording data, and performing laboratory tests. Experimental procedures include: molecular biology techniques such as isolation of DNA/RNA, gel electrophoresis, PCR, NGS library preparations, CES. Duties involve much micropipetting and meticulous measuring.

• Interacting with customers to provide information in response to inquiries, concerns, and requests about services and analysis results.

• Preparing solution, reagents, and stains following standard laboratory formulas and procedures.

• Monitoring equipment performance and maintenance schedules. May perform routine repair or replacement of standard parts.

• Monitoring inventory levels and orders material and supplies in accordance with established policies and procedures.

• Tracking and following up with work progress, and ensuring day-to-day smooth operations of bench work

3. Requirements:

• Bachelor’s degree in biology/biomedical science or equivalent field, with 1-2 years genomics/NGS/CES preferred.

• Organized, meticulous and keen attention to details

• Able to work independently as well as in teams

• Prior experience with working within a CAP-accredited/ISO/HCSA and long read sequencing lab is an advantage

Job Description

Responsibilities:

You will maintain a continuous improvement mindset to seek out opportunities for enhancements to quality, productivity and/or patient safety care.

• Assist in prescription processing/supplying of medicines to outpatients, inpatient and other departments, e.g.: Laboratory, Radiology and wards
• Compound lotions and antiseptic solutions as directed
• Pack oral and topical medications
• Collect prescription charges for outpatients
• Assist Pharmacist and Pharmacy Technician in store management
• Assist in compiling statistics for reports and survey
• Involve in Quality Improvement or Patient Safety Project

Requirements:

• Minimum GCE ‘N’ / 'O' / 'A' Level credits in English and Mathematics / NITEC or Higher NITEC / ITE Skills Cert in Healthcare (Outpatient) (Traineeship) / WSQ Higher Certificate in Healthcare Support (Pharmacy Support) or equivalent / Diploma in any discipline.
• Preferably with experience in clinic or hospital setting.
• Team player with good interpersonal and communication skills.
• Computer literate with knowledge of Microsoft Excel and Word.

We regret to inform that only shortlisted candidates will be notified.

SJTU Asia-Pacific Graduate Institute (APGI) was established by Shanghai Jiao Tong University as the only overseas institute of graduate education, research and innovation. APGI provides MBA program for over 30 years in Singapore, having more than 800 local MBA alumni. As part of the Singapore’s National Research Foundation (NRF) CREATE campus, APGI works with partner universities and government agencies to develop sustainable solutions to global challenges.

Job Description

Reporting to the Director, the incumbent will provide efficient administrative and technical support for research staff and students in carrying out their academic/research activities in the laboratories, while ensuring a safe and conducive environment for stakeholders.

Job Duties

• Manage lab safety, enforce safety rules, and ensure compliance with safety regulations; Conduct safety orientation for new lab users
• Develop and maintain SOPs and guidelines for laboratory operations
• Maintain lab equipment and chemical inventory listing
• Manage chemical and biological activities in the laboratory and ensure proper documentation, storage, and disposal
• Manage licenses and ensure safe operation and maintenance of equipment in the laboratory
• Manage assets and maintain proper records for audit
• Handle procurement of lab consumables and equipment, as well as replenishment of laboratory supplies
• Monitor, manage and report budget usage for the laboratory and assist in financial reporting and budget projections and planning
• Assist in the planning, development, and optimization of laboratory space
• Serve as First Aider, Fire Warden, Spill Responder, Safety Committee member
• Take care of the day-to-day lab operations and housekeeping
• Perform any other duties as assigned by the Director

Job Requirements

• Bachelor’s Degree in Biological, Chemical Engineering, or related discipline, with at least 2 years of relevant experience.
• Experience in management of chemicals (HS, EP, P&FM) preferred
• Knowledge on local regulatory requirements (SCDF, SPF, NEA, MOM, etc.) for storage and handling of Hazardous Substances (HS) preferred
• Familiar with licenses applications, Petroleum and Flammable Material (PFM), Explosive Precursors (EP), Hazardous Substance (HS) etc.
• Experience and knowledge in risk management, workplace safety and health
• Experience in procurement and budget management to facilitate budget preparation for the laboratories
• Proficient in Microsoft Office suite of applications
• Experience in Emergency Response Team is a plus

Service Technician (Medical Device)

1 year contract, potential to renew

Come and join us!

Do you wish to work in a world-class organization trying your hands at something you have dreamt of doing?

“FIND YOUR PLACE” by joining a world-class MNC Healthcare company

Get an opportunity to explore new technology, learn new skills, enjoy the diverse and open culture, engagement and care, flexible working model, career opportunities, competitive salary and bonus, and endless amenities and benefits.

Company Description:

Our client is an MNC Healthcare company. As a focused healthcare company, with expertise in Innovative Medicine and MedTech, they are empowered to tackle the world’s toughest health challenges, innovate through science and technology, and transform patient care.

Job Responsibility

• Taking responsibilities for repairing and testing of DePuy and Ethicon Endo-Surgery products.
• Managing the tools upkeep and calibration.
• Managing work orders, quotations, and Invoicing of service.
• Managing Repair Centre Upkeep, Housekeeping & Cleanliness.
• Managing spare parts inventory planning, ordering, and receiving.
• Working with Synthes Switzerland and organizations for all repairs related work requirement.
• Using MD S&R to manage the repair activity.
• Performing on site commissioning (installation) and maintenance of medical devices.
• Up to 25% of international travel may be required.
• You might be required to work on weekend.
• Tracking warranties of instruments.
• Performing on-site or over the phone Customer Support.
• Managing Service Logistics (inwards and out wards repairs).

Qualifications, Experience and Competencies:

• Diploma/ Degree in Engineering with minimum 1 year of experience in a field service or technician role.
• Ability to trouble-shoot and guide the service team on all technical aspects.

Interested parties, please apply through this link https://jnj-apac.talent-pool.com/projects OR click on APPLY button.

Alternatively, you can share your CV at [email protected]

EA License: 94C3609

Reg No: R1440247

PRODUCT AREA

Behind everything our users see online is the architecture built by the Technical Infrastructure team to keep it running. From developing and maintaining our data centers to building the next generation of Google platforms, we make Google's product portfolio possible. We're proud to be our engineers' engineers and love voiding warranties by taking things apart so we can rebuild them. We keep our networks up and running, ensuring our users have the best and fastest experience possible.

JOB DESCRIPTION

The Data Center team designs and operates some of the most sophisticated electrical engineering, mechanical engineering and HVAC systems in the world. Facilities Technicians at Google data centers operate, monitor and support physical facilities conditions. Some of these duties will include heating and cooling of air and water, power supply, generators, UPS systems, electrical distribution and control and monitoring systems. You regularly help inspect, maintain and repair various data center systems such as piping and non-critical electrical or mechanical system components). You provide daily assistance to senior technicians as you read blueprints/schematics, conduct tours of systems and assess their working order.

As an advocate for best practices, you develop creative approaches to reducing operational costs while improving overall data center efficiency. You ensure that environmental and safety standards are consistently met, identifying problems and making repairs quickly. In emergency situations or abnormal conditions, you manage data center performance issues and outages to minimize the recovery time from failures.

Qualifications

JOB RESPONSIBILITIES

• Operate, maintain, troubleshoot, and repair electrical equipment in a Data Center environment. Provide Root Cause Analysis (RCA), recovery, and prevention actions for service failure.
• Prepare and execute operation procedures, respond to work request/service failure, and provide operational and technical expertise in required areas. Coordinate vendor support in repairs/replacement and support project implementation (site acceptance tests, factory acceptance tests, site inspection for defects, etc.).
• Improve site WUE and PUE, operational efficiency, and minimize environmental impact. Develop a good understanding of the infrastructure design and sequence of operation.
• Prepare and conduct training/sharing to the team. Ensure safety rules and regulations associated with operating infrastructure.

MINIMUM QUALIFICATIONS

• Associate's degree, trade school certification, verifiable training in a relevant technical field, or equivalent practical experience.
• Experience with electrical, mechanical, and controls systems including: Feeders, Transformers, Generators, Switchgear, UPS systems, ATS/STS units, PDU/PMM units, Chillers, Air handling units, and CRAC units.
• Experience in troubleshooting.
• Ability to work non-standard, on-call rotation weekend hours.

PREFERRED QUALIFICATIONS

• Electrical Technician's Licence.Good knowledge in industrial networking and coordinating with others in order to determine problems and implement solutions
• Experience troubleshooting for electrical systems. Familiar with SCADA, Power monitoring system, building monitoring system, PLC programming.
• Ability to work in varying outdoor temperature conditions and perform material handling (lifting/shifting) to work on platforms, ladders, and under raised floors.
• Ability to learn quickly and address issues as they arise during normal operations or during emergency conditions. Demonstrate the ability to follow the site’s environmental health and safety policies.

PRODUCT AREA

Behind everything our users see online is the architecture built by the Technical Infrastructure team to keep it running. From developing and maintaining our data centers to building the next generation of Google platforms, we make Google's product portfolio possible. We're proud to be our engineers' engineers and love voiding warranties by taking things apart so we can rebuild them. We keep our networks up and running, ensuring our users have the best and fastest experience possible.

JOB DESCRIPTION

The Data Center team designs and operates some of the most sophisticated electrical engineering, mechanical engineering and HVAC systems in the world. Facilities Technicians at Google data centers operate, monitor and support physical facilities conditions. Some of these duties will include heating and cooling of air and water, power supply, generators, UPS systems, electrical distribution and control and monitoring systems. You regularly help inspect, maintain and repair various data center systems such as piping and non-critical electrical or mechanical system components). You provide daily assistance to senior technicians as you read blueprints/schematics, conduct tours of systems and assess their working order.

As an advocate for best practices, you develop creative approaches to reducing operational costs while improving overall data center efficiency. You ensure that environmental and safety standards are consistently met, identifying problems and making repairs quickly. In emergency situations or abnormal conditions, you manage data center performance issues and outages to minimize the recovery time from failures.

Qualifications

JOB RESPONSIBILITIES

• Be responsible for the uptime, maintenance, and troubleshooting of water pumps and treatment systems, HVAC, and Control and Monitoring Systems.
• Operate, monitor, maintain, and respond to abnormal conditions in the data center facilities systems and equipment. Provide tracking and trending operational characteristics.
• Support startup, commissioning, and integration of new equipment and systems into facilities infrastructure. Direct the execution of starting-up, commissioning, documentation, and full facilities turnover on assigned projects.
• Provide operational and maintenance insights into the design review process.
• Produce standards and templates for global control/monitoring system analysis, diagnostic, preventive maintenance, and trend logs for data center critical facilities systems.

MINIMUM QUALIFICATIONS

• Associate's degree, trade school certification, or other certified training in a related technical field, or equivalent practical experience.
• 2 years of experience in operating and maintaining mission critical facilities (data centers, hospitals, pharma, refineries, power plants, industrial, etc.).
• Commissioning experience of HVAC and mechanical distribution systems (chillers, air handling units, etc.) to include air and water side systems.

PREFERRED QUALIFICATIONS

• Experience with operations in a data center and troubleshooting for mechanical/HVAC systems.
• Ability to learn quickly and address issues as they arise during normal operations or during emergency conditions.
• Perform maintenance on mechanical or MEP systems, and capable of independently resolving common system failures.
• Ability to work non-standard 12 hour shifts including weekends and holidays on-call rotation.
• Ability to work with varying outdoor temperature conditions, perform material handling (lifting/shifting) and work on platforms, ladders, and under raised floors.

Founded in 1996, Huabao Flavours & Fragrances Co., Ltd. is the largest Flavour & Fragrance house in China, engaged in the research & development, production, sales and services of tobacco flavors, food flavours, fragrances and food ingredients.

Our company in Singapore - Huabao Asia Pacific Pte Ltd, is currently looking for a motivated and detail-oriented Lab Technician to join our team.

Job Summary

The Lab Technician will be responsible for maintaining laboratory equipment, conducting sample pretreatments, performing GC-MS data analysis, and assisting in the creation and testing of compound flavors.

The ideal candidate will possess a strong technical background, meticulous attention to detail, and a genuine enthusiasm for continuous learning and professional development. If you have a passion for learning and a keen interest in the science of flavors, we want to hear from you!

Key Responsibilities:

• Support daily maintenance of the GCMS to ensure accuracy and reliability.
• Ensure all equipment complies with safety and operational standards.
• Prepare samples for analysis and follow standardized protocols to ensure consistency and accuracy.
• Identify the properties of samples (e.g., alcohol base, oil base, PG base), inject them into the GC-MS equipment according to the corresponding method, and manage the analysis of comparison samples.
• Perform other tasks as assigned by the supervisor.

Qualifications:

• Associate or Bachelor’s degree in Chemistry, Food Science, or a related field.
• 3 years experiences in the flavor or food industry, familiarity with GC-MS instrumentation and software.
• Excellent attention to detail and organizational skills.
• Ability to work independently and as part of a team.
• Enthusiastic about learning and applying new knowledge.
• Fluency in Mandarin.

What We Offer:

• Competitive salary and benefits package.
• Opportunities for professional development and career advancement.
• A collaborative and innovative work environment.

Job Summary:

We are seeking a motivated and detail-oriented lab technician to join our research team.You will play a crucial role in executing our scientists R&D plans for our innovative product COzTERRA™, which is a textile treatment that removes CO2 from air. You will leverage our innovative high throughput experimentation platform to execute our experiments. This position offers valuable hands-on experience in a dynamic research environment and the chance to contribute to innovative advancements in the field of textiles.

Key Responsibilities:

Formulation Preparation

- Work closely with our scientific team to prepare formulations for textile treatments based on established protocols and guidelines

- Accurately measure and mix chemicals and materials to ensure the consistency and reproducibility of formulations both manually and using our high throughput formulation system

- Treat textiles using these formulations

- Maintain detailed records of experimental procedures, observations, and outcomes

Laboratory Management

- Assist in the setup and organization of laboratory equipment, chemicals, and materials for various experiments

- Participate in maintaining a clean and safe laboratory environment by adhering to safety protocols and practices

- Prepare solutions, reagents, and samples as required for testing and analysis

- Coordinate procurement of new chemicals and manage chemical inventory

Materials Characterisation

- Conduct materials characterization using our proprietary lab tools

- Help in the interpretation of characterization data and contribute to the preparation of analysis reports

- Collaborate with researchers to develop a comprehensive understanding of material properties and behavior

Data Collection and Analysis

- Collect data from experiments and characterization processes accurately and meticulously

- Organize and analyze experimental data using software tools or platforms as directed

- Present findings and observations in a clear and concise manner to the research team

Collaboration and Learning

- Collaborate effectively with cross-functional teams, including researchers, scientists, and engineers

- Actively participate in team meetings, discussions, and knowledge-sharing sessions

- Continuously learn and stay updated on relevant scientific advancements and industry trends

Qualifications

- A bachelors (0-1 years experience) or diploma holder (with min 3 years experience) with experience in Chemistry, Materials Science or Chemical Engineering

- Good understanding of chemical principles, laboratory techniques, and materials characterization methods

- Adept with wet chemistry work

- Strong attention to detail and a commitment to producing accurate and reliable results

- Excellent organizational skills and the ability to manage multiple tasks simultaneously

- Effective communication skills, both written and verbal

- Proficiency in using standard laboratory equipment and Microsoft Office suite

- Proficiency with Python is a plus

- Prior experience with textile treatments, formulations, or materials characterization is a plus

*Note: This job description is intended to provide a general overview of the responsibilities and qualifications required for this role. Actual responsibilities and qualifications may vary based on the specific needs of the company and research team.*

Job Summary:

We are seeking a motivated and detail-oriented lab technician to join our research team at Xinterra. You will play a crucial role in executing experiments and analysis of materials for our innovative product COzTERRA™, which is a textile treatment that removes CO2 from air. You will also have the opportunity to be part of our unique high throughput experimentation labs. This position offers valuable hands-on experience in a dynamic research environment and the chance to contribute to innovative advancements in the field of textiles.

Key Responsibilities:

Laboratory Management

- Assist in the setup and organization of laboratory equipment, chemicals, and materials for various experiments

- Participate in maintaining a clean and safe laboratory environment by adhering to safety protocols and practices

- Prepare solutions, reagents, and samples as required for testing and analysis

- Coordinate procurement of new chemicals and manage chemical inventory

Materials Characterisation

- Conduct materials/textile property investigation using our innovative high throughput experimentation systems

- Help in the interpretation of characterization data and contribute to the preparation of analysis reports

- Collaborate with our research team to develop a comprehensive understanding of material properties and behaviour

Data Collection and Analysis

- Collect data from experiments and characterization processes accurately and meticulously

- Organize and analyze experimental data using software tools or platforms as directed

- Present findings and observations in a clear and concise manner to the research team

Collaboration and Learning

- Collaborate effectively with cross-functional teams, including researchers, scientists, and engineers

- Actively participate in team meetings, discussions, and knowledge-sharing sessions

- Continuously learn and stay updated on relevant scientific advancements and industry trends

Qualifications:

- Either a bachelors (0-2 years experience) or diploma (with min 3 years experience) in Chemistry, Materials Science or Chemical Engineering

- Experience with analytical chemistry is a must

- Good understanding of chemical principles, laboratory techniques, and materials characterization methods

- Strong attention to detail and a commitment to producing accurate and reliable results

- Excellent organizational skills and the ability to manage multiple tasks simultaneously

- Effective communication skills, both written and verbal

- Proficiency in using standard laboratory equipment and Microsoft Office suite

- Proficiency with Python is a plus

- Prior experience with textile treatments, formulations, or materials characterization is a plus

*Note: This job description is intended to provide a general overview of the responsibilities and qualifications required for this role. Actual responsibilities and qualifications may vary based on the specific needs of the company and research team.*

Job Description

A Postdoctoral Genomics Scientist position is available immediately at the IMCB Cell Fate and Therapeutics Laboratory. The lab is interested in understanding cell fate determination, singleanalytics and developing novel tools and strategies to derive desired cell types for therapeutic applications.

Applicants with a strong background in next-generation sequencing, singlecell genomics and spatial analysis are invited to apply. Successful candidates must be highly motivated, have a passion for research and be able to work in an interdisciplinary environment.

Job Requirements:

• Ph.D. with a strong research background in singlecell genomics and spatial analysis
• Knowledge of biostatistics highly desirable
• Excellent analytical, technical and problem-solving skills
• Self-starter who is comfortable working in a fast-moving interdisciplinary team
• Strong publication record in peer-reviewed journals
• Committed and able to work flexible hours
• Excellent communication, technical writing and presentation skills

Recipient of the esteemed International Translational Neuroscience Award, Dr. Yan, a pioneer in Brain Tumor research, joins IMCB to establish the NeuroPhenomics Lab. This lab marks a new chapter in our quest for profound biological insights and their translation into biomarkers and therapies.

The lab"s mission revolves around a profound exploration of brain tumor biology, particularly focusing on key driver mutations like IDH1 and IDH2. These mutations, significant in the development of aggressive malignant gliomas, are pivotal in altering chromatin and genome methylation, thus influencing tumor evolution. The lab extends this research by identifying other genetic alterations with potential clinical relevance.

Dedicated to exploring new frontiers, the NeuroPhenomics Lab integrates advanced techniques in genetics, epigenetics, and metabolomics at both single-cell and spatial levels. This approach allows for a detailed examination of tumor cell diversity and their interactions within the microenvironment. The lab also investigates neurometabolism, emphasizing the TCA cycle and IDH enzymes, and studies how metabolites affect the brain and tumor progression.

Aiming to bridge research and clinical application, the lab"s multi-dimensional strategy includes iPSCs, patient-derived organoids, transgenic models, and advanced imaging technologies. This positions the NeuroPhenomics Lab at the forefront of developing transformative therapies in neurooncology and neurometabolism.

Job Opportunity:

Join the NeuroPhenomics Lab in its endeavor to redefine brain tumor genomics. We seek individuals with a strong background in Computer Science or Bioinformatics, particularly in data analysis, to contribute to our innovative research.

Key Qualifications:

• PhD in Bioinformatics, Computer Science, Biostatistics, or a related field with a research focus.
• Individuals planning to pursue PhD training (at NUS or NTU) are also welcome to apply.
• Expertise in bioinformatics and next-generation sequencing data analysis.
• Experience with Single-cell sequencing and Spatial-omics data analysis is a plus.
• Familiarity with developing AI models for visual recognition of imaging data.
• Experience in applying research to train Large Language Models (LLM) is advantageous.
• Preferred experience in Computer-Aided Drug Discovery.
• Exceptional analytical, technical, and problem-solving skills.
• Ability to work independently and thrive in a dynamic team environment.

PharmEng Technology, a leading consulting firm in the Pharmaceutical Industry, is looking for various Technician positions to fill for the Biotechnology Clean Room Good Manufacturing Practice and Good Laboratory Practice environment.

Great opportunity to enter the prospering Pharmaceutical Biotech Industry in Singapore

Good Career prospects, On-The-Job training will be provided for New Entrants career seekers with or without related experience

Various working hours available for different job roles:

1) Office Hours rotations - Minimum NITEC qualification, mixture of manual and technician level work

2) 12-hour day shifts, 2-3-2 work/off rotations - mixture of manual and technician level work

3) 12-hour permanent night shifts, 2-3-2 work/off rotations – Minimum NITEC or Diploma Holder only

Qualifications:

• Minimum NITEC or Diploma Holders
• Background in Pharmaceutical, Life and Food Sciences, Process Manufacturing, Engineering or equivalent welcome
• We are looking for individuals who are self-motivated with a positive attitude towards learning new skills, collaborative team player with a strong team spirit, enthusiastic and keen to join the Pharmaceutical biotech manufacturing industry.
• Diligent in documentation, adept at following instructions, committed to maintaining workplace cleanliness and safety at all times.
• Proficient in basic office software applications, fluent in English.

Key Responsibilities:

Various roles and responsibilities, cross functional support and collaboration, not limited to the below:

• Laboratory QC Microbiological Testing, Environmental Monitoring
• Samples Receipt and Management
• Equipment and Facility Management & Cleaning
• Method Validation and Qualification, In-Process Control
• Documentation and Compliance, Quality Assurance Support, Investigations and Deviations
• Certain roles will require manual heavy lifting as part of the job scope.

You will be interviewed for your interest and suitability for the different roles available.

Shortlisted candidates will be contacted.

❤️❤️❤️❤️❤️❤️❤️❤️❤️

Job: Manicurist / Nail Technician / Eyelash Beautician / Embroidery Beautician

Salary Info:

✅ Salary $3000-$5000 (Basic + Commission)

✅ $2000 Sign-on Bonus (Start working before January)

✅ Annual Bonus

Job Info:

✅ 1-2 Rest Day(s) per Week

✅ Working Hours 10am-8pm/11am-9pm

✅ Public Holidays Off-in-Lieu

✅ Medical Benefits

✅ 7+ Days Annual Leave

✅ 14 Days Medical Leave

✅ 60 Days Hospitalisation Leave

❤️ Friendly Colleagues

❤️ No Stress No Pressure

❤️ Pleasant Working Environment

Location: Tampines (beside MRT)

Requirements:

➡️ Full-Time Role

➡️ Min 1 Year Experience in Manicure / Eyelash Extension / Eyebrow Embroidery

➡️ Experience in Multiple Services Preferred

➡️ Cheerful & Positive Personality

➡️ Willing to Learn New Skills

➡️ Singaporean / PR / LTVP / Malaysian (Work Permit)

Interested parties can WhatsApp +65 9485 7181

WhatsApp: https://wa.me/6594857181

➖➖➖➖➖➖

招聘： 美甲师 / 美睫师 / 纹眉师

薪水资料：

✅ 薪水 $3000-$5000 （底薪+佣金）

✅ $2000 加入奖金 （1月前开工）

✅ 年度花红

工作资料

✅ 每个礼拜1-2天休固定息日

✅ 工作时间 10am-8pm/11am-9pm

✅ 公共假期而外休假

✅ 医疗福利

✅ 年假 7+ 天

✅ 14 天病假

✅ 60 天住院假

❤️ 同事好相处

❤️ 没压力没烦恼

❤️ 轻松工作环境

地点： 淡滨尼 (地铁站旁边）

要求：

➡️ 全职

➡️ 至少1年美甲/美睫/纹眉经验

➡️ 样样都会会加薪 (美甲/美睫/纹眉等等）

➡️ 性格开朗

➡️ 有学习精神

➡️ 新加坡人/永久居民/家属准证/马来西亚人

有兴趣的可以 WhatsApp +65 9485 7181

WhatsApp: https://wa.me/6594857181

❤️❤️❤️❤️❤️❤️❤️❤️❤️

PharmEng Technology has been providing quality services to leading manufacturers of healthcare and pharmaceutical products since 1997. Our specialists hold expertise in Commissioning & Qualification, Validation, Quality Systems, Regulatory Affairs, Engineering, and Training to ensure that our clients can keep on providing the world with their cost-effective and high-standard healthcare products. At PharmEng Technology, we strive to cultivate the best working environment where empowerment, passion and perseverance are nurtured while serving our clients to achieve their unique business goals. We are seeking an experienced Manufacturing Engineering Technician with experience in pharmaceutical company/Life Science industries for a role in Singapore.

Responsibilities:

1. Provide technical support to manufacturing operations, including equipment setup, troubleshooting, and maintenance to ensure smooth production processes.
2. Assist in the development and optimization of manufacturing processes, collaborating with engineers and other team members to implement improvements and innovations.
3. Conduct routine inspections and tests on manufacturing equipment and systems to ensure compliance with regulatory standards and quality requirements.
4. Participate in the validation and qualification of manufacturing processes and equipment, documenting procedures and results according to regulatory guidelines.
5. Support continuous improvement initiatives by analyzing data, identifying opportunities for efficiency gains and waste reduction, and implementing corrective actions.
6. Adhere to Good Manufacturing Practices , Standard Operating Procedures, and safety protocols to maintain a safe and compliant work environment.
7. Collaborate with cross-functional teams, including production, quality assurance, and regulatory affairs, to resolve issues and achieve production goals.
8. Provide training and guidance to production personnel on new processes, equipment, and procedures to ensure effective implementation and adherence to standards.

Qualifications:

• Associate degree or technical certification in engineering, pharmaceutical sciences, or a related field; Bachelor's degree preferred.
• Prior experience in pharmaceutical manufacturing or a regulated industry is a plus.
• Strong mechanical aptitude and hands-on experience with manufacturing equipment and instrumentation.
• Knowledge of Good manufacturing practices regulations, and industry best practices for pharmaceutical manufacturing.
• Excellent problem-solving skills and attention to detail, with the ability to analyze data and troubleshoot technical issues effectively.
• Strong communication and interpersonal skills, with the ability to collaborate effectively in a team environment.
• Ability to work independently, prioritize tasks, and adapt to changing priorities in a fast-paced environment.
• Willingness to work flexible hours, including weekends and holidays, as needed to support manufacturing operations.

Why PharmEng Technology?

Our consultants come from different areas of the Pharmaceutical/Biotech/Medical Device industries and have extensive experiences obtained from world-class organizations in North America, Europe, and Asia. At PharmEng Technology, we value everyone’s unique talents and work together to support our clients. We offer continuous career growth, competitive wages, opportunities for travel and a team mentality that sets us apart from our competitors. It is the growth of our staff that continues to grow our company globally.

EEOC Statement

At PharmEng Technology, we don’t just accept difference — we celebrate it, we support it, and we thrive on it for the benefit of our employees, our clients, and our community. PharmEng Technology is proud to be an equal opportunity workplace.

Overview

The job-holder is responsible to provide a safe and clean environment for the surgical patient.

Job Responsibilities

You will be responsible for the following:

• Ensure operational readiness of OT equipment
• Check the suction and diathermy machines for cleanliness and good working order
• Check operating lights for clarity and good functioning
• Clean, check and prepare operating table and accessories
• Perform daily inventory check on positioning aids and accessories
• Routine cleaning of OT equipment e.g. tourniquet, light source etc
• Assist to ensure efficient turnover of daily elective and emergency operations in the operating room
• Transport patient from the ward to OT and vice versa
• Assist in the safe transfer of patient from trolley to operating table and vice versa
• Assist in positioning the patient
• Assist surgeon in application of tourniquet
• Adjust and focus the operating lights and assist nurses in patient care
• To stay in the OR to assist the surgical team when needed, eg. Change the suction liner, additional adhoc equipment needed etc
• Perform cleaning of the OR in between cases within 15mins. (Turnaround time target)
• Maintain a clean and safe operating room environment
• Ensure that the disposable suction liner is capped tightly before discarding into the biohazard bag.
• Perform OT terminal cleaning at the end of the list or after infected cases as stated in the protocol.
• Maintain proper daily housekeeping of OT suite which include operating room, prep-room, scrub room, Anaesthesia room and sluice room.
• Clear soiled linen and surgical wastes to the dirty utility room after the next case had started or when time permits.
• Other job duties such as maintaining proper housekeeping of pantry after 6pm.
• Perform any other duties as assigned.

Requirements

• Preferably with NITEC / Secondary 2 education
• Possess initiative and keenness to learn
• Possess good interpersonal and communication skills

Responsible to set-up and operate CNC Machine Milling, Lathe

• Able to perform simple programming (For CNC machines only)

• Conduct first piece inspection

• Report to management in the event of non-conformance of components

• Adhere to good quality, housekeeping, and safety practices

• Perform 5S

Detailed

• Perform duties assigned by Engineering

• Check Routing Sheet details against drawings are correct before machining

• Maintain good housekeeping in the areas of work

• Always follow Company’s safe working practices and requirements

• Comply with safety measures and practices of the Company

• Report any unsafe conditions and practices to Production Superintendent or Engineering Assistant

• Ensure that a machining and inspection procedure is compiled to meet Quality Management System requirements and Quality Objectives

• Ensure adherence and compliance of the Quality Management System and achieve Quality Objectives

• Check raw material dimension before machining commencement

• Carry out the day-to-day machining operation in accordance with Routing Sheet and required date

• Perform 100% in-process inspection and recording inspection result

• Identity any non-conformance product and inform the problem to Production Superintendent or Engineering Assistant

• Check and report raw material defects / non-conformance before commencement

• Proper handling and usage of inspection devices and production machines/equipment

• Ensure job piece set-up and machining operation is in accordance with Routing Sheet and drawings

• Constant check on machining process and carry out in-process inspection to control the dimension according to customer requirements

• Maintenance and account for the inspection devices and tools issued for use

Requirements

• NTC 2 or 3 in Precision Engineering or equivalent

• Minimum 2 years of relevant experience

• Able to operate Fanuc Controller

• Experience in the machine applied for will be an added advantage

• Trainee positions available for interested parties without experience

• Able to read & interpret technical drawings

• Capable of using measuring instruments - Micrometre, Bore Gauge, Profile Projector

· Must be able to work night shift and split shift

· Must be able to work extra hours or weekend if needed