1) Cabin Technician

2) Aircraft & Component Technician

3) Sheetmetal Technician

4) Engine Technician

5) Ground Support Equipment Operator

CABIN AIRCRAFT TECHNICIAN

• To carry out inspection, repair, work on passenger and crew seats, galleys, toilets, aircraft cabin equipment and all fixtures & fittings items associated with the aircraft cabin interior in accordance with the approved company procedures and as per airworthiness and regulatory requirements.
• To remove and replace aircraft parts relating to the Aircraft Cabin to ensure high standards of maintenance of aircraft cabin and furnishings and to ensure the highest standards of passenger safety and comfort.
• Complete and maintain manuals and technical documents pertaining to the repair and maintenance work carried out on the cabin interior.
• Responsible for the cleanliness and tidiness of the working area.
• Monitor, maintain and control the movements of all spares and materials, to ensure their proper usage and deployment, including the returning to stores of all the un-used spares and materials at the end of each shift.
• To perform cabin configuration changes on fleet as per the operational requirements.
• To ensure cabin safety aspects are maintained during cabin maintenance and pay particular attention to Emergency equipment.
• To assist aircraft engineers & technician with regard to daily maintenance activities on the aircraft as assigned by Maintenance Supervisor.
• Any other ad-hoc duties assigned by the Supervisor.

Requirements:

• Minimum NITEC/Diploma qualifications in Aerospace Engineering/ Aerospace Electronics/ Aerospace Avionic Engineering/ Aeronautical Engineering.
• At least 2 years of Cabin Maintenance working experience in Aviation industry, excluding OJT/Helper.
• Exposure on wide bodied airframes, Boeing and Airbus commercial aircrafts.
• Able to commit rotating shifts, if applicable.

A&C AIRCRAFT TECHNICIAN

• Perform C and D aircraft heavy maintenance tasks as directed by a Certifying Licensed Engineer/Duty Supervisor.
• Perform other tasks that may reasonably be requested by the Licensed Aircraft Engineer/Duty Supervisor.
• To carry out routine aircraft servicing tasks as required in accordance with maintenance manual procedures, observing all safety procedures and manufacturers/company regulations. Depending on the discipline this may include conducting general visual inspections and fluid replenishment system servicing, refuelling etc.To effectively use any specialized tooling or test equipment that may be required as part of the checking, testing, replacement or servicing of a system or component.
• The ability to understand the need for such equipment’s as references in the aircraft manufacturer’s manuals is essential.
• The ability to communicate at various levels, and to coordinate with other areas over technical issues, to ensure that all relevant parties are aware of the aircraft’s serviceability status.
• To ensure the maintenance of tools and equipment in the relevant work place and conducting safe working practices at all times.
• Any other ad-hoc duties assigned by the Supervisor.

Requirements:

• Minimum NITEC/Diploma qualifications in Aerospace Engineering/ Aerospace Electronics/ Aerospace Avionics Engineering/ Aeronautical Engineering.
• At least 2 years of A&C maintenance working experience in Aviation industry, excluding OJT/Helper.
• Exposure on wide bodied airframes, Boeing and Airbus commercial aircrafts.
• Able to commit rotating shifts, if applicable.

SHEETMETAL AIRCRAFT TECHNICIAN

• To perform Structural Repair as per OEM approved Structural Repair Manual and Repair Disposition.
• To assist Aircraft License Engineer and Supervisory Lead to perform damage/repair assessment.
• To perform part forming such as skin doubler, stiffener and bracket for structural repair proposes in-accordance to OEM approved manual or drawing.
• To perform basic airframe/cabin task as required to facilitate access removal for structural repair.
• Required excellent tool maintenance and housekeeping practices.
• Any other ad-hoc duties assigned by the Supervisor.

Requirements:

• Minimum NITEC/Diploma qualifications in Aerospace Engineering/ Aerospace Electronics/ Aerospace Avionics Engineering/ Aeronautical Engineering.
• At least 5 years of Sheetmetal working experience in Aviation industry, excluding OJT/Helper.
• Exposure on wide bodied airframes, Boeing and Airbus commercial aircrafts.
• Familiar on basic structural repair tooling and practices.
• Must be able to work in confine space such as Fuel Tank if needed.
• Capable to interpret OEM Approved Engineering Drawing, Aircraft/Component Maintenance Manual and Structural Repair Manual.
• Able to commit rotating shifts, if applicable.

ENGINE OVERHAUL AIRCRAFT TECHNICIAN

• Perform disassembly/ assembly of engine/ module for repair and overhaul.
• Perform Boroscope inspection
• Install engine components onto the engine/ module.
• Perform troubleshooting, modification and maintenance works

Requirements:

• Minimum NITEC/Diploma qualifications in Aerospace Engineering/ Aerospace Electronics/ Aerospace Avionics Engineering/ Aeronautical Engineering.
• At least 2 years of Engine Overhaul working experience in Aviation industry, excluding OJT/Helper.
• Able to commit rotating shifts, if applicable.

GROUND SUPPORT EQUIPMENT OPERATOR

• To carry out preventive and corrective maintenance of the GSE
• To ensure equipment decals are visible. Replace if necessary
• Delivery of GSE to and from hangar
• Carry out inspection of GSE around airport bays
• Repositioning of maintenance steps from bays when required
• To ensure all metal structures of GSE are corrosion free by removal of corroded surface and using of corrosion protection agent
• To lubricate all movable joints

Requirements:

• NITEC in Mechanical / Electrical / Mechatronic engineering
• Class 3 or 4T preferred

We are hiring Contract-Perm Lab Assistants to be outsourced to our clients from reputable healthcare organisations.

Apply now!

Job Scope

• Handle the decontamination, assembly, inspecting, wrapping and sterilisation of surgical instruments and medical equipment.
• Maintain an accurate inventory as well as ensure effective medical supplies management
• Wash test tubes/ scissors medical surgical instruments

Requirements

• Comfortable to work in infectious diseases department, doing sterilisation of equipment / test tubes
• Comfortable to carry heavy loads of up to 7-10kg

Interested candidates are invited to email your resume to:

[email protected]

Please include your full working experience, education background, notice period, expected salary.

Joy Cheen

Outsourcing Team Recruit Express Pte Ltd

Company Reg. No. 199601303W | EA License Number: 99C4599

We regret only suitable candidates will be shortlisted for an interview.

1. Aerospace Technician (Engine Technicians)

Job Responsibilities:

• Perform disassembly and assembly of engine/module for repair and overhaul
• Replaces or repairs worn, defective, or damaged components, using hand tools, gauges, and testing equipment.
• Install engine components onto the engine/module
• Perform troubleshooting, modification and maintenance work

2. Aerospace Technician (A&C Base)

Job Responsibilities:

• Perform C and D heavy maintenance tasks and other tasks requested by the Licensed Aircraft Engineer/Duty Supervisor.
• Inspect and examine aircraft components, for leaks, cracks or defects
• Read and utilize drawings, maintenance breaks or other issues manuals, ATA codes, illustrated parts catalogues, service bulletins and other maintenance documents to troubleshoot and complete work assignments
• Perform routine maintenance operations, such as the replacement of power plant and aircraft components
• Perform daily and weekly inspections to check for cracks, oil leaks, burned areas, foreign object damage, warping, distortions and missing segments
• Complete all tasks in the allotted time frame and to the quality standards of our company, our customers and the authority.
• Order supplies, equipment, materials and parts for repairs and general maintenance
• Keep detailed records of the inspections performed, repairs finished, maintenance procedures and ordered parts

3. Aircraft Technician (Sheetmetal)

Job Responsibilities:

• Perform minor and major maintenance checks, such as removal and installation of access panels, inspection of areas prone to corrosion
• Perform sheet metal structure repair work and alteration of damage aircraft in accordance with work specifications of structure repair manual (SRM), component maintenance manual (CMM), or any engineering authorizations and manufacturer specifications to return aircraft serviceable and airworthy condition.
• Replace or make repairs to skins and structural component of aircraft as required using approved manuals, drawings and tools.
• Performed critical maintenance tasks such as structural repair or fabrication on metal parts.
• Inspect structural frames such as stringer, bulkhead, spars, wing, movable control surfaces and perform corrosive prevention control on skin and aircraft structures.

4. Aerospace Technician (Avionics)

Job Responsibilities:

• Maintenance and testing of avionics systems.
• Carry out electrical component changes.
• Assist engineers in trouble-shooting and rectification
• Assist in installing and testing of avionics communications equipment.
• Ensure that newly installed systems and those that have been repaired meet requirements mandated by the Federal Aviation Administration and specifications set by aircraft manufacturers.
• Participate in designing, purchasing, testing and calibrating avionic systems such as computer and electronic communication panels.
• Inspecting and testing the complex electrical and computer systems that allow aircraft to function.
• Oversee airplane's radar system, radio communications equipment and the flight controls.
• Removal, assemble and install electrical components, and keep detailed written records of repair work performed on aircraft. (E.g. Main Battery, Emergency Battery, Starter Generator, ACW Generator, GCU, BPCU, etc.)
• Removal and installation of engine and propeller electronic controls.
• Performs components changes, tests, and adjustments on aircraft electrical avionics systems consistent with the quality standards.

5. Aerospace Technician (Cabin)

Job Responsibilities:

• Removing and cleaning carpets, wiping windows, changing curtains, removing waste from seats, cleaning lights, changing a& moving passenger seats, cleaning electrical equipment, maintaining and repairing airplane cabins, performing laboratory cleaning and replenishing activities, performing floor vacuuming, cleaning seat pockets, luggage storage area, etc.
• Changing lighting systems and repairing entertainment systems, seat electrical system, etc.
• Perform the task of removing and cleaning curtains, discarding waste from the seats and adjusting bulkheads.
• Maintenance and repairing of seats, sidewall liners, overhead compartment and lavatory condition.
• Install cabin interior components into commercial aircraft including seat tracks, overhead bins, galleys, side panels, etc.
• Maintain the quality of the aircraft interiors on the operated fleet.
• Maintain the interior and exterior cleaning standards on the operate fleet.

6. Aerospace Technician (Machining)

Job Responsibilities:

• Using precision engineering machines (for example CNC) to make aircraft metal tools and parts.
• Reading and interpreting technical blueprints and design models.
• Loading raw materials into the machine.
• Inputting the product design into the computer modeling software.
• Choosing and loading the correct cutting tools for the job.
• Adjusting machine settings to the desired product specifications.
• Troubleshooting issues during the Aircraft Part/Component manufacturing process.
• Completing quality control tests during the manufacturing stage and on the final Aircraft Product.
• Cleaning and maintaining the machine.

Requirements:

• Minimum diploma in engineering, preferably in Aerospace or relevant certificates.
• At least 3 years of working experience in the aviation industry as a full fledge technician
• Excellent analytical, interpersonal, communication and problem-solving skills
• Mechanically and electrically trained on aircraft systems
• Exposure on commercial aircrafts from Boeing and Airbus, wide and narrow bodied airframe
• Able to commit rotating shifts

This position ensures that all aspects of building and facilities maintenance in the Schools is at optimum operational condition and conforms to up to date regulatory and safety requirement at all times.

Job Responsibilities:

• Preventative maintenance and ensure all facilities operate efficiently and conform to operating standards.
• Hands-on in meeting urgent repairs/complaints on electrical services, plumbing and sanitary requests.
• Proper maintenance of interior and exterior walls of buildings, appliances and equipment in the building.
• Conduct day to day inspection activities/ checking building wear & tear and defects
• Mobilise and supervise contractors on major / rectification works.
• Ensure compliance with all regulatory and safety regulations
• Comply with company safety guidelines and procedures
• Ensure accurate updates/reports are done for all work progress and completion.
• Monitors and controls expenses within all areas of the department.
• Lead and mentor a team of maintenance technicians.
• Any other duties that is assigned, inclusive of support for new school projects.

Requirements:

• Relevant Diploma/Higher Nitec/Nitec with 3 years relevant experience or
• 5 years of relevant working experience in major building maintenance/construction projects
• Possess a class 2B/3 license with own transport.

We offer a competitive remuneration package plus benefits to the right candidate. Suitably qualified applicants are invited to send your updated resume in MS Word via APPLY NOW button.

Please include cover application letter and detailed CV with current and expected salary and copies of qualifications and testimonials. On appointment original copies must be provided for verification.

Responsibilities

• Responsible for project management of infrastructure services supplied/offered by the Company that include, but not limited to hospital infrastructure, animal facilities, laboratory furniture, and other systems.
• Management of projects undertaken by ITS Science & Medical in Singapore or regional areas.
• Review tender documents and contracts related to the project.
• Plan and prepare schedules for project team at site.
• Attend regular meetings with consultant / client / main contractor.
• Support sales team from time to time.
• Ensure Workplace Safety and Health is implemented at site.

Requirements

• Diploma/bachelor’s degree in mechanical engineering or related Engineering disciplines.
• Experience in ACMV is preferred.
• Preferably with 3-5 years of relevant work experience handling projects.
• Valid Class 3 driving license and personal vehicle will be an added advantage.

For consideration, kindly submit your CV by clicking “APPLY Now”
**Only shortlisted candidate would be notified**
EA Reg. No: R22090617 | Zhao Zi Yuan (Anna)

Job Duties and Responsibilities

1. Performs maintenance and inspection of electrical system and equipmen

2. Ensuring teams work together to deliver quality work to strict deadlines.

3. Monitoring construction processes, and providing training and team building sessions are required .

4. Ensuring adherence to health and safety regulations at all times.

5. Performing equipment material and routine site inspections.

6. Scheduling regular meetings with vendors, site inspectors managers and staff

7. Working closely with workers and other professionals

8. Staying up to date with safety codes and advancements in construction

9. Assisting with the recruitment and training of new staff.

10. This is not an executive job, ready to work in project Provide technical advice and assistance to the overall project team as appropriate including Commissioning and Service.

Requirements:

1. Minimum Qualification in Mechanical Engineering

2. Minimum experience 07 (Seven) years in relevant field

3. Excellent communication skill

4. Ability to focus and keep calm under pressure

5. Expert in site Documentation & site work preparation

6. Ready to work after regular working hours.

7. During handover the job Saturday, Sunday even public holiday able to work.

8. Sometimes have to work for day or night shift

Responsibilities:

• Perform preventive and corrective maintenance on radio, network, and wireless equipment.
• Run tests, troubleshoot, and replace faulty equipment as needed.
• Assist in supervising site works and subcontractors.
• Communicate with customers and stakeholders about project updates.
• Be available for 24/7 standby and adapt to changing work schedules.

Requirements:

• ITE/Diploma in Electrical/Electronic Engineering or related field.
• Experience with radio, networking, and wireless equipment.
• Strong troubleshooting skills, especially in remote locations.
• Ability to read and understand technical documents and drawings.
• Proficiency in MS Word and Excel.
• Possess a valid Class 3/3A driving license and own vehicle

1. Respond to and attend to customer service and repair requests to resolve issues and conduct scheduled maintenance services.
2. Supports the installation, commissioning, service and maintenance requirements for food waste valorisation system in Singapore.
3. Supports remote technical troubleshooting of units.
4. Liaise with third-party service contractors and component manufacturers where required.
5. Assist with on-site operational training and facilitate on-site rollout.

JOB SCOPE:

• Service, repair, and troubleshoot Equipment/ Machine.

REQUIREMENTS:

Minimum 2 years of relevant experiences with any of the Equipment/ Machine* stated below.

• Aerial Work Platform (AWP)
• Cargo Handling Equipment
• Construction Equipment - excavator, loader, truck, etc
• Cranes - mobile, tower, quay, etc
• Earthmoving Equipment - dozer, grader, etc
• Ground Support Equipment (GSE)
• Material Handling Equipment (MHE) - forklift, VNA, reach truck, etc
• Mobile Elevating Work Platforms (MEWP)
• Road Construction Equipment - compactor, cold milling, paver, etc

PACKAGE:

• Basic range from $2800 – $3600, before OT.
• Guaranteed Annual Bonus of minimum 1 month.
• Performance Bonus average 2 - 3 months.

BENEFITS:

• 5 workdays per week, 8.00am – 5.00pm.
• Annual leave starting between 14 – 21 days.
• Insurance coverage.
• Medical expenses coverage.
• Company pick up bus across Singapore.

Position Summary/Overview:

The Data Center Operation technician has overall responsibility to support the troubleshooting and

coordinating activities pertaining to the day-to-day support of the data centers and critical facilities. He/She is responsible for troubleshooting, managing the vendors/contractors and report to the Data Center Operation Site Lead.

Responsibilities:

• Lead a team of contractors or vendors and support in the daily data centre operations
• Perform data centre operations and inspections including monitoring and management for infrastructure systems, DC environment and facilities
• Monitor critical facilities and infrastructure system alerts and perform necessary escalation
• Perform incident management and escalation pertaining to any facilities and system downtime
• Manage and administer the service desk operations
• Ensure the implementation of safe systems on site activities.
• Liaison with UOB BUs in regard to utilities, building services / facilities and systems issues
• Assist in the planning and execution of disaster recovery activities
• Administer and ensure building records, licenses, permit and etc are properly documented.
• Ensure procedures, processes and service level are being followed for any service delivery and operations
• Periodic review of the data centre operations and report any gaps and issues
• Prepare and update of Data Centre and Service Desk monthly report
• Maintain the site asset database, provide updates in accordance with CMMS requirements.

Education & Experience:

• Possess a Diploma in Computer Science or equivalent
• Possess Data Centre Certifications such as Certified Data Centre Professional
• Possess at least 3 years’ experience in Data Centre Operations, Facilities Monitoring & Management
• Familiar with Data Centre facilities including Computer Room Air-Con (CRAC), fire suppression system, water detection system, Uninterrupted Power Supply (UPS) and etc
• Familiar with Service Desk operations and incident management process
• Basic understanding on the operation of MEP systems
• Resourceful, analytical and problem solving skill
• Good communications and interpersonal skills

Job Responsibilities:

1. Monitor food cooking machines and make adjustments to the controls for devices such as boilers, ovens, fryers and cookers.

2. Clean and reinstate work stations, operate cooking equipment and dispose of waste following the SOPs.

3. Monitor food processing equipment and report cases of improper functions.

4. Operate equipment and machinery in food production lines.

5. Check food quantities, container formats and materials against production instructions given.

6. Remove the finished product from the production line and push batches to the next step of the process for packaging.

7. Verify that each finished item meets the quality standards of the company by observing the size, shape and luster of each snack item

8. Other ad-hoc duties as assigned.

Job Requirements:

1. Preferably with experience in F&B sector.

2. Night Shift

3. Must be able to work on weekends and public holidays.

4. Staff Meal will be provided.

Job Opportunity: Lab Tech (Flavour & Fragrance)
Location: Biopolis
Contract Duration: 1 year
Working Hours: Monday to Friday, office hours
Salary: Up to $2,300/month

Key Responsibilities:

1. Laboratory Management:Complete and review work assignments, managing workload and resources with the team.
   Mentor and cross-train lab staff using standardized training programs and documentation.
   Implement quality management systems to meet SOPs and safety standards.
   Participate in team-led initiatives for cost, quality, and efficiency improvements.
   Coordinate timely calibration of lab equipment and ensure proper housekeeping.
   
2. Laboratory Operations:Perform perfume compounding and material selection per formulation guidelines.
   Update compounding data in the Electronic Lab Notebook.
   Ensure tools are clean and properly maintained for weighing.
   Prepare for odor evaluations and maintain End-to-End (E2E) material management.
   Assist with shipping compounded materials, ensuring complete shipping documentation.
   Operate and maintain the Contexa robot.
   

How to Apply: Send your resume to Jocelyn Chan at [email protected] or contact via Telegram @jocelynchan.

Jocelyn Chan | Consultant | Recruit Express Pte Ltd (Healthcare & Lifescience) Company EA Licence Number: 99C4599 Personnel EA License: R1331820

Work Location: Yishun

Working Hours: Mondays to Fridays from 7.30 am to 2.30 pm, inclusive of 1/2 hr lunch break.

Contract Period: 3 Jan 2025 to 31 Dec 2026.

Job Description

In the Area of Teaching and Learning

• To prepare and get ready resources for Science teaching and learning
• To assist Science teachers in the setting up of experiments, etc. for Science lessons and/or activities and clearing of resources after each Science lesson and/or activity.
• To assist in the setting up of ICT and Science equipment such as projector, iPads, dataloggers, and microscopes for Science lessons and/or activities
• To perform yearly inventory and stock taking of Science resources and equipment in the 2 Science Laboratories and TinkerSpace.
• To organise the Science resources and equipment in the 2 Science Laboratories and TinkerSpace.
• To maintain cleanliness and assist in ensuring safety in the 2 Science Laboratories and TinkerSpace at all times.
• To assist in conducting simple Science enrichment activities such as showcasing the life cycles of some animals and creative toys during designated recesses / Science school-based events to complement Science learning in the classroom.

Science Projects

• To assist in the loan and yearly inventory and stock taking of resources in various Science Programmes e.g.TinkerSpace Programme, Science Sparkles, E2K-Ignite Programmes, etc.
• To assist the department in monitoring the Aquaponics System including feeding the fishes and harvesting the produce.
• To assist the department in the feeding and maintainance of the Mealworm Beetles, Stick Insects Enclosure, etc.
• Must be able to comfortably handle ‘live’ specimens e.g. mealworm beetles

Others

• To do any other duties as assigned by HOD Science.

Job Requirement

• Minimally ‘O’ level qualifications
• Must have at least 2 years of working experience as a Science Laboratory Assistant/ Laboratory Technician
• Proficient in MS Excel

EA: 22C1322

EAP: R24124011

Position Summary/Overview:

The Data Center Operation technician has overall responsibility to support the troubleshooting and

coordinating activities pertaining to the day-to-day support of the data centers and critical facilities. He/She is responsible for troubleshooting, managing the vendors/contractors and report to the Data Center Operation Site Lead.

Responsibilities:

• Lead a team of contractors or vendors and support in the daily data centre operations
• Perform data centre operations and inspections including monitoring and management for infrastructure systems, DC environment and facilities
• Monitor critical facilities and infrastructure system alerts and perform necessary escalation
• Perform incident management and escalation pertaining to any facilities and system downtime
• Manage and administer the service desk operations
• Ensure the implementation of safe systems on site activities.
• Liaison with UOB BUs in regard to utilities, building services / facilities and systems issues
• Assist in the planning and execution of disaster recovery activities
• Administer and ensure building records, licenses, permit and etc are properly documented.
• Ensure procedures, processes and service level are being followed for any service delivery and operations
• Periodic review of the data centre operations and report any gaps and issues
• Prepare and update of Data Centre and Service Desk monthly report
• Maintain the site asset database, provide updates in accordance with CMMS requirements.

Education & Experience:

• Possess a Diploma in Computer Science or equivalent
• Possess Data Centre Certifications such as Certified Data Centre Professional
• Possess at least 3 years’ experience in Data Centre Operations, Facilities Monitoring & Management
• Familiar with Data Centre facilities including Computer Room Air-Con (CRAC), fire suppression system, water detection system, Uninterrupted Power Supply (UPS) and etc
• Familiar with Service Desk operations and incident management process
• Basic understanding on the operation of MEP systems
• Resourceful, analytical and problem solving skill
• Good communications and interpersonal skills

Job Description

• Industry/ Organization Type: Food Manufacturing
• Position Title: Facilities Technician
• Working Location: Woodlands (Nearest MRT: Admiralty)
• Working Hours: 5 days, 8.30 am – 5.30 pm (Saturday compulsory, 1 off day on weekday & Sunday)
• Salary Package: Up to $2,000 + OT + AWS + Bonus
• Duration: Permanent

Key Responsibilities

• Oversee daily facility operations and ensure safe, efficient functioning and maintenance of equipment and systems.
• Perform inspections, assess risks, and inform operations of issues.
• Conduct preventive maintenance for facility systems and equipment.
• Respond to emergencies and participate in 24-hour response activities.
• Handle setup and upgrades of production lines.
• Adhere to HACCP maintenance schedules.
• Organize machinery storage and unused equipment.
• Follow safety, security, and hygiene procedures.
• Complete tasks as directed by the Senior Engineer.

APPLY NOW!!!

• At least NITEC in Mechanical Engineering
• Minimum 2 years of related working experience
• Able to start work immediately or on short notice
• Possess Welding Cert would be an advantage

Please apply through ANY of the following methods:

• Submit your application by clicking the APPLY button;
• Email your resume to Job(at)anradus.com.sg. Please indicate #68847 on the email subject.

Anradus Application Policy: We value each application and ensure every resume is reviewed. Our process is efficient, typically concluding within 3 working days. If you do not receive communication from us within this timeframe, it's likely that your application has not been shortlisted by our client. In such cases, we recommend continuing your job search to maximize your opportunities.

Anradus Pte Ltd | EA License No. 20C0161 | Adelin Chong | EA Reg No.: R1875641

Job Description

• Industry/ Organization Type: IT/Rental (Photocopier)
• Position Title: Copier Technician
• Working Location: Ubi Ave
• Working Hours: 5.5 days (Mon-Fri 8.30am–5.30pm, Alternate Sat 8.30am-12.30pm)
• Salary Package: Basic $3,000 + VB + OT Pay + Company Vehicle Provided
• Duration: Permanent

Key Responsibilities

• Install and set up photocopier machines and connectivity at customer locations.
• Diagnose and repair equipment both on-site and off-site.
• Investigate and resolve maintenance and repair issues.
• Manage tool kits, spare parts, and supplies responsibly.
• Conduct preventive maintenance and adjustments on photocopiers.
• Provide excellent support by responding to customer needs promptly.
• Submit meter readings on time.
• Train and advise customers on machine operation and basic maintenance.
• Interact professionally with all customers.
• Build good relationships with customers and colleagues.
• Perform any other duties assigned by supervisors.

APPLY NOW!!!

• GCE O-Level or higher.
• Has valid driving license to go on site for servicing.
• Experience in repairing/service of copier machines is preferred.
• Customer service skills.
• Basic PC and network knowledge is a plus.
• Training will be provided.

Kindly apply through ANY of the following methods:

• Submit your application by clicking the APPLY button;
• Email your resume to [email protected]. Please indicate #70878 on the email subject.

Anradus Application Policy: We value each application and ensure every resume is reviewed. Our process is efficient, typically concluding within 3 working days. If you do not receive communication from us within this timeframe, it's likely that your application has not been shortlisted by our client. In such cases, we recommend continuing your job search to maximize your opportunities.

Anradus Pte Ltd | EA License No. 20C0161 | Angel Lim | EA Reg No.: R1769781