Job Responsibilities

• Foster sound relationship with staff, patient and public.
• Perform and assist in diluting and reconstituting chemo drugs using Laminar airflow Hepa filter Isolator.
• Maintain a safe and clean working environment by complying with the company procedures, rules, and regulations.
• Maintain current notes and paper works related to patient’s treatment.
• Perform all tasks in a safe manner that is consistent with the company policy.
• Perform duties and responsibilities as may be assigned by the Clinic Nurse Manager/ Clinic Nurse in Charge/ Senior Pharmacy Technician.
• Assist in Clinical Trial dispensing of drugs and documentation.
• Handling of Medications:

- Assist in dispensing medications as prescribed by the doctors under the supervision of Clinic Nurse Manager / Clinic Nurse in Charge/Senior Pharmacy Technician in accordance with the company SOPs.

- Apply principles of safe handling of medications.

- Anticipate, prepare, and differentiate between the various medications and compatibility issues.

- Ensure IV medications, diluents and calculation of dose is counter checked by a Registered Staff Nurse or Doctor.

- Safe handling and disposal of chemotherapy agents.

- Safe handling of Controlled drugs.

- Prevent and manage cytotoxic drug spillage.

- Promote patient’s drug compliance to medications and provide counselling to patient.

- In charge of the drug’s inventories by ensuring sufficient drugs are at all times maintained, drugs near expiry date are exchanged and/or written off. Determine stock level and anticipating needed medications.

- Ensure stocks are stocked up systematically according to first expiry/ first out (first in/ first out.

- Liaise with purchaser to place and expedite order of medications. Raise purchase requisition and purchase order when stock reaches reorder level.

- Organize medications to be dispensed to patients by reading doctor’s orders carefully. Prepare labels with instructions, adhering to the 5 rights of medication.

Serves as a resource person for knowledge of medication uses, side effects and dosage.

Job Requirements

• Candidate must possess at least a Diploma, Advanced/Higher/Graduate Diploma, Bachelor’s degree, Post Graduate Diploma or Professional Degree in Pharmaceutical Science or equivalent.
• 1-2 years of experience in the industry will be an added advantage.
• Highly motivated with the ability to work in a team and a fast-paced environment.
• Excellent communication, interpersonal and people management skills.

• Manage Audio Visual Lighting System (AVLS) and Digital Audio Recording Transcription (DART) for event functions
• Setting up of meeting rooms
• Daily routine check and testing of AV equipment before and after each event
• Daily routine check on cleanliness in meeting, training and function rooms
• Operate AV equipment and provide technical advice related to audio-visual equipment
• Assist with logistics set up for all events
• Perform onsite fault diagnosis and coordinate with product suppliers to resolve technical issues related to video conferencing and audio-visual integrated solutions
• Maintain an updated individual fault record for all fault escalated to the product suppliers
• Any other ad-hoc duties as and when assigned

Requirements:

• Diploma in Electronics/ Audio Visual related discipline
• Minimum 2 years of relevant experience with knowledge in managing the setup of AV systems
• Good interpersonal and communication skills
• Able to work independently
• Willing to work fixed 5.5 days work week
• Has a good safety mindset and display good WSH behaviour

Who We Are
BD is a leading global medical technology company that creates medical technology, devices and laboratory equipment for a variety of needs across the healthcare sector. At BD, we are looking for candidates who possess passion, innovative solutions and a commitment to our one mission of improving access to groundbreaking medical and biotechnology services for people near and far, delivering state-of-the-art technology and cutting-edge research in the battle to fight and cure infectious diseases. With a global reach that extends across 50 countries worldwide, our network of professionals collaborates on effective measures to deliver enhanced patient quality such as lower health care delivery costs, improved health care and safety, and expanded health care for all. Join our company and see how you can become a part of one global mission to make a difference in human health.

Purpose: You will focus on machine troubleshooting, spare parts maintenance, perform preventive maintenance, investigation on quality-related issues & customer complaints.

This is a permanent full-time position, 12 hours shift, shift pattern 3/4/4/3.

Job Description:

General Accountability

• Safety and ISO14001 Environmental accountability. Ensure a safe, healthy and environmentally-friendly workplace by observing Company’s rules and procedures. Active involvement in prevention, elimination of potential safety hazards and participation in activities which promotes recycling, replacement and reduction of resource materials.
• Safety & health accountability: Safety and health are important to BD and we encourage the observance of all safety programs and training assigned to you. Such programs are to be attended in a timely manner to ensure that work tasks carried out are in accordance to our safety guidelines and SOPs.
• Good Manufacturing Practice (GMP) accountability. Observing GMP rules and procedures.
• Apply SOP and/or SWI in daily operations.
• Observe BD Code of Ethics
• Reporting up on all incidents / accidents, near misses, deviations from plan and when required, to take part in further investigations.

Operation Tasks

• Operate machines to meet production output, and other metrics like quality, waste, etc.
• Perform Preventive Maintenance (Cleaning, Service, Replace)
• Perform troubleshooting of machine and tools, equipment failures to meet production targets, safety and quality standards and/or specifications.
• Perform product/machine changeover on the line by tool/die change and machine set-up.
• Initiate, Implement and follow-up on machine enhancement and project assignments.
• Write Standard Work Instruction / Procedure for assigned operation / process
• Implement Corrective and Preventives Actions
• Participate in training and coaching of Technicians and new hires on skills and knowledge on machine operations and adjustments.
• Assist Engineers or Subject Matter Experts for any CI activities.

Supporting Tasks

• Contribute into departments activities that are needed in order to achieve goals set for the department eg. Kaizen submission, team building, safety kaizen submission, 20Keys and others.
• Participate in the discussion and review of team's performance in the daily shift changeover meeting.
• Participate in continuous improvement initiative / activities.
• Perform any other tasks as assigned.

Our Requirements:

• Nitec, Higher Nitec or Diploma holders in Mechanical or Mechatronics Engineering with at least 2-5 years’ relevant experience in the field.
• This is a permanent full-time position, 12 hours shift, shift pattern 3/4/4/3.
• A good team player with ability to work cross culture

Culture and Benefits

Here at BD, we embrace a growth mindset, building capabilities for the future and helping you become the best version of yourself. We offer our employees a clear direction and career pathway for development. We pride ourselves on our transparent and rigorous talent processes that are inclusive, deeply embedded in trust, aligned with our culture, and enable us to achieve strategic imperatives of the organization. Our leaders are committed, engaged and accountable to making talent our top priority.

How To Apply

Submit your application by clicking on the “apply” button at the top of the page.

Working hours : Monday –Thursday – 8.00am to 5.30pm, Friday – 8.00am to 5.00pm

Location: Islandwide (Travel to Site)

Salary range : $1.8k - $2.5k (Salary subject to experience) + $100 Per Week (If on standby)

Key Responsibilities:

• To perform installation, servicing and maintenance works for German manufactured automated storage system.
• Lead the commissioning of automated storage system, ensuring seamless integration and functionality.
• To ensure timely completion of installation and commissioning tasks.
• To standby 24 hours on duty roster (will provide additional standby allowance & OT)
• To provision engineering services.
• Any ad hoc duties assigned by Superior

Qualifications:

• Candidate must possess at least Professional Certificate/Nitec /Diploma/Advanced/Higher/Graduate Diploma in Engineering (Electrical/Electronic), Engineering (Mechanical), Engineering (Mechatronic/Electromechanical) or equivalent

Whatsapp: +65 80135651(Alvin)

Alvin Chua Ming Jing:R23116192

The Supreme HR Advisory Pte Ltd: 14C7279

Candidate must possess at least a Professional Certificate, Diploma/Advanced/Higher/Graduate Diploma in Engineering (Electrical/Electronic), Engineering (Industrial), Others or equivalent.

Required language(s): Preferably English and Mandarin spoken.

At least 6 Year(s) of working experience in the related field is required for this position.

Preferably specialist in Engineering - Electrical or equivalent.

Must have knowledge in Instruments and Electrical System for Process Control Environment

Knowledge and understanding of SCADA, DCS System, PLC, Instrumentation, Field Devices.

Job Scope:

1) Maintenance of Field Instruments for multiple Process Plants

2) Troubleshooting and problem solving for field Instruments

3) Calibration and commissioning of field Instruments

4) Electrical equipment troubleshooting and general maintenance for the process plant

Job Description

• Perform Electrical Works including wiring and assembly work
• Set up and install Surveillance equipment and systems
• Maintain and perform troubleshooting for Surveillance equipment and systems
• Any ad-hoc duties as assigned

Requirements

• Min. Diploma in Electrical/Electronic Engineering
• Min. 2 years relevant experience
• Preferable with Class 3 driving license
• Ability to work independently and as a team-player
• Able to perform shift work and work on weekends & public holidays

Role

A member of Building Management Services reporting to Operations Executive and/or Operations Manager.

Responsibilities and Tasks

1) Reporting to Operations Executive and/or Operations Manager.

2) Ensure the smooth operation and maintenance of ACMV equipment (ie. Chillers, Cooling Towers, pumps, AHU, FCU & etc are functions as per scheduled).

3) Maintain/repair plumbing & sanitary systems to avoid water damage and restore full use of water fixtures if required.

4) General maintenance/repair of electrical fixtures and fittings.

5) General maintenance/repair of wall, ceiling and floor finishes.

6) Act as a member of Company Emergency Response Team (CERT) for Tier 1 HRI building.

7) Monitor all work being performed by term contractors & tenant’s service contractors, tenant’s fit-out and reinstatement works.

8) Attend to tenant’s request and feedback.

9) Responsible for alerting the management of any unusual occurrence or damage that have taken place or that may occur (ie. faulty of lifts, escalator, ejector pumps).

10) Any other duties as assigned by management.

Requirements

1) Minimum 3 years of experience in a retail mall/office/hotel with sound technical knowledge of building services (M&E).

2) Higher Nitec in Facility Management or Nitec in Built Environment (Mechanical & Electrical Services).

3) Candidates with Certificate of WSQ Respond to Fire Emergency in Buildings (RFEB) course, and Certificate of CERT First Aid with CPR and AED course will have added advantage. Training will be provided to candidates without this.

4) Basic knowledge in MS Office.

5) Solid understanding of general maintenance procedures and techniques.

6) Effective problem-solving abilities with excellent communication skills.

Responsibilities:

• Troubleshoot day-to-day manufacturing issues, identify and/or implement system improvements that contribute to the achievement of throughput, yield, and product performance goals.
• Assist Engineer in data collection and organizing data for analysis. Perform failure analysis improvement tasks and efficiency as well as product yield.
• Ensure all activities are complying with SOP, ISO, GMP/GDP and FDA.
• Maintain good housekeeping and 5s at the workplace.
• Coordinate and participate in maintenance functions of all manufacturing equipment and ensure that they are all on good conditions. Schedule and perform all chemicals mixing activities and accountable for chemical mixing quality.
• Coordinate with calibration team for calibrate the measurement tool with need/required for on schedule calibration.

Requirements:

• Minimum Nitec in Engineering related
• At least 1 year of experience in equipment maintenance
• Experienced in semiconductor industry

Interested candidates who wish to apply for the advertised position, please click on the APPLY button below to send in your resume to [email protected]

EA License No: 13C6305

Reg. No.: R1981808

For candidate who applied for the advertised position is deemed to have consented to us that we may collect, use or disclose your personal information for purpose in connection with the services provided by us.

• In charge of repair, maintenance, and troubleshooting of machinery onboard.
• Conduct wiring and connection of electrical cables.

Requirements:

• Nitec in Electrical engineering or equivalent
• At least 2 years of experience in electrical schematics diagrams and symbols.

If you are keen to apply for the position, kindly email your detailed resume in MS Word to [email protected]

Please note that only shortlisted candidates will be notified.

For more job opportunities, please visit our website at

www.recruit-expert.com

EA Licence: 19C9701

Registration: R22111604

Responsibilities:

• Responsible for housekeeping duties in the lab.
• Responsible for the timely completion of chemical testing of raw material, intermediates, in-process control samples and final API and data verification.
• Ensure that all test equipment is used and maintained correctly.
• Perform any method transfer or method qualification reports or equipment qualifications and support the transfer of new products.
• Maintain up-to-date, complete and precise records of all tests performed.
• Adhere to cGMP and GLP requirements and apply 6S concept.
• Assist in the resolution of quality problems as required.
• Developing and changing of in-house laboratory procedures as appropriate.
• Train new analyst.
• Support Audit preparation and any audit related activity
• Adheres to and supports all EHS & E standards, procedures and policies
• Any other general administrative duties/ad-hoc projects as assigned by immediate supervisor.

Requirement:

• Minimum Degree in related related field of study
• Minimum 2-4 years of QC lab analyst experience in chemistry lab setting
• Familiar with GMP / GLP would be good
• Comfortable to do 12 hour shift work (have allowance given)
• Able to start immediately or within short notice

Interested applicants, please email your updated CV to [email protected] or WA 91792208 for more information.

Recruiter's Ref Code: #HHM

EA Personnel No: R21103938

EA Personnel Name: Reina Ng Hwee Min

Benefits:

• MNC, 5 days, North
• Salary: $1700 - $2500, allowances
• 12hr rotating shifts: 9pm to 9am/9am to 9pm
• 14-15 working days per month
• Overtime claim, AWS, performance bonus
• No experience can apply
• North/Central

Job responsibilities:

• Provide service and support for Vertical probe cards
• Liaise with customers and factory on the card issues
• Compile of investigation report/tracker/monthly report
• Support for DOE (design of experiment) or evaluations either by customer or company’s initiative
• Pin replacement onsite
• Station at client’s site

Requirements:

• Minimum Nitec in Electronics/Mechatronics
• 1 to 2 years of relevant experience in semiconductor industry
• Candidates with no experience can apply
• Possess basic electronics and troubleshooting skills
• Able to start within short notice

Interested applicants, please send your resume to [email protected]

Pest Control Technican

Requirement:

- Must possess valid NEA Pest Control Technican license

- Able to work independently as 90% of the jobs are one-man operation

- Physically-fit mature workers are welcome to apply

- Company Van can be driven home

- Experience in all general pests including termite, bees/ hornets etc

Work scope:

- Perform pest control service to commercial, industrial, offices, F&B, construction etc in a professional manner

- Highlight and recommend pest proofing and prevention to clients

- Maintain equipments

- Fill-up service reports after each service

- Record chemcial usage

- Take photos for work carried out as required for reports etc

interested candidate can WhatsApp to 9699 9811 for interview

Salary $2500 per month

Job Scope

• To conduct laboratory tests

• To handle samples and testing samples

• To assist in laboratory duties such as equipment maintenance, maintaining inventory, purchase of consumables and preparation of laboratory reagents/supplies, including laboratory cleaning and waste-disposal.

Requirement

• Prior experience in Medical lab

• Diploma in Medical Technology / Life science related

Interested candidates please send in your resume to:

[email protected]

EA Personnel: Valerie Yong Kian Fung
CEI No.: R1103704

Recruit Express Pte Ltd, EA License No.: 99C4599

Job Description

• Industry/ Organization Type: Manufacturing/Interior Design
• Position Title: CNC Technician/Operator
• Working Location: Changi South
• Working Hours: Monday – Friday, 8 am – 5 pm
• Salary Package: Up to $3,500 + Performance Bonus
• Duration: Permanent

Key Responsibilities

• Responsible for setting up, tool selection, operating multi-axis CNC machining, Fiber Laser Machining and inputting the programs as designed.
• Ensure that the CNC machine & Fiber Laser Machine operates in a safe, controlled environment.
• Responsible for loading and setting up.
• Perform basic preventive & corrective maintenance of the machine.
• Maintain specifications by observing drilling, grooving, and cutting, including turning, facing, knurling and thread chasing operations; taking measurements; detecting malfunctions; troubleshooting processes; adjusting and reprogramming controls; sharpening and replacing worn tools; adhering to quality assurance procedures and processes.
• Maintain equipment by completing preventive maintenance requirements; following manufacturer’s instructions; troubleshooting malfunctions; calling for repairs.
• Machine-related general tasks.

APPLY NOW!!!

• Minimum Nitec in Precision Engineering or related field.
• At least 4 years of related working experience.
• Computer literate, and familiar with WoodWOP, Pytha, Art- CAM, Jdpaint, Solidworks, AutoCAD.
• Knowledgeable in the operation of CNC Machines & Fiber Laser Machines.
• Familiarity with Homag CNC Machines is an added advantage.

Kindly apply through ANY of the following methods:

• Submit your application by clicking the APPLY button;
• Email your resume to Job(at)anradus.com.sg. Kindly indicate #65253 on the email subject.

Anradus Application Policy: We value each application and ensure every resume is reviewed. Our process is efficient, typically concluding within 3 working days. If you do not receive communication from us within this timeframe, it's likely that your application has not been shortlisted by our client. In such cases, we recommend continuing your job search to maximize your opportunities.

Anradus Pte Ltd | EA License No. 20C0161 | Norman Wee | EA Reg No.: R23115114

• Operate, perform daily checks, and monitor performance of water and wastewater treatment systems at customer site
• Report any abnormalities, and contribute to constant improvement of water treatment system.
• Perform preventive maintenance or servicing of waste water systems, which include changing of membranes.
• Assist in fabrication and testing of membrane systems
• Assist in fabrication and testing of membranes
• Assist in upkeep of warehouse
• Any other ad-hoc activity

Description:

• Responsible for housekeeping duties in the lab
• Responsible for the timely completion of chemical testing of raw material, intermediates, in-process control samples and final API and data verification
• Perform any method transfer or method qualification reports or equipment qualifications and support the transfer of new products
• Adhere to cGMP and GLP requirements and apply 6S concept
• Assist in the resolution of quality problems as required.
• Adheres to and supports all EHS & E standards, procedures and policies

Requirements:

• Degree in Science/Engineering discipline
• Min 2-3 years of experience

Interested candidates, please forward your resume to [email protected] or whatsapp 94498220!

Consultant: Huang Jingsheng Kevyn (R1333338)

Recruit Express Pte Ltd (99C4599)

• Perform plan preventive maintenance work (PPM) as assigned by the Supervisor.
• Troubleshoot electrical fault and reinstate the power supply and equipment back to normal operation.
• Troubleshoot air conditioning fault and reinstate the air conditioning back to normal operation.
• Repair water pipe burst, mechanical work, medical gases system and other related facilities equipment.
• Any other duties assigned by the Senior Technician/Engineer.

Requirements

• NITEC in Mechanical or Electrical Engineering or equivalent
• At least 2 years of relevant experience
• Willing to work 5-6 days a week on rotating shifts

For interested candidate, please email your resumes to [email protected]

Denyse Nicole Tan Shuqin (#HDT)

Recruit Express Pte Ltd

CEI No: R1333503

Company EA license : 99C4599

Info can be share ATM: -

• Basic $3000 - $4000 + AWS + (Laundry $30)
• UBI area
• 5.5 Days (Mon-Fri 8:30am to 5:30pm) , (Saturday 8:30am to 12:30pm)

Your Responsibilities: -

• Report technical issues and create reports for the Principal
• Identify and report common technical problems to improve quality
• Improve customer service and repair quality through effective coordination and frontline management
• Manage submissions for new models/recall campaigns and compile monthly results
• Update warranty records for recall campaigns
• Support daily workshop operations, including diagnostics and major repairs
• Conduct on-site repairs and recall campaigns at dealer workshops when needed
• Provide product knowledge and servicing information to customers and dealers
• Mentor fellow technicians in diagnostic and technical skills
• Perform test rides and quality control after completing jobs.

You will need: -

• Possess a valid Class 2B driving license
• Diploma in Mechanical/Electrical/Electronic Engineering or equivalent
• Preferably with 2 years of hands-on experience in similar industry.

Interested applicants may click "Apply Now" or email to [email protected] to submit your application.

By submitting your personal data and/or resume, you will be deemed to have agreed and consented to us collecting, using, retaining, and disclosing your personal information to prospective employers for their consideration.

We regret to inform that only shortlisted candidates would be notified. We wish you the best of luck!

Recruit Lync Pte. Ltd. | EA Licence Number: 22C1000

Jonathan Chang Sing Erh | EA Personnel Licence: R22110541

Job Description

• Assist Director/Managers / Executives / Senior Technician to manage Reefertec overall Technical Operations (PSA & EKCA)
• Attend Safety Inspection/Toolbox Meeting (both PSA / EK)
• Trouble shoots all malfunction empty and laden refrigerator containers.
• Perform Pre-Trip Inspection PTI – Empty Reefer containers for Shipping Lines.
• Perform maintenance and repair in the Reefer Yards and also on board vessel
• Perform Connection and disconnection of Reefer Cables in the Reefer Yards and on board the vessels
• Liase with Customers in PSA plus all leased reefer units on/off hiring at EK Depots
• Updating of HHT or PSA MNR / e-Depot systems whenever repairs / work done.
• Plug / Unplug of ARM Data Cables
• Trouble shooting all Empty Reefer units at EK Depots and PSA Depots
• Responsible for systematic updating of reefer data into Lines and PSA systems
• Other duties assigned by the Company or Management
• Preferably with Manual Driving Class 3 License.

*Send me your resume via WhatsApp ❤

80138164*

Working Hours:

-12 hour shifts: 7:30am to 7:30pm (day shift) and 7:30pm to 7:30am (night shift) - 4Days Workweek

Location: Pasir Panjang Terminal Gate 4.

Responsibilities

1. Ensure specimen identification, processing and storage of test specimens are in consistent with good laboratory practices

2. Ensure all test results provided for clinicians are accurate and reliable

3. Maintain stock of laboratory supplies

4. Perform housekeeping in laboratory

5. Perform routine testing on laboratory instruments

6. Process laboratory specimens for test and storage

7. Transport specimens to and from laboratory for processing

8. Perform other functions as delegated by supervisor and/or lead laboratory

Job requirements

1. Higher Nitec / Diploma in Medical Technology / Life science related

2. Meticulous with strong analytical, interpersonal and communication skills

Interested candidates please send a copy of your resume in MS Word to

[email protected]

EA Personnel: Valerie Yong Kian Fung (R1103704)

Company Reg. No 199601303W

EA Licence No. 99C4599

Main duties:

• Follow all relevant Safe Systems of Work and report health & safety concerns.
• Carry out process inspection of raw materials and semi-finished components.
• Maintain records of work quality processes.
• Inspect raw materials, components and forgings.
• Perform daily / weekly calibrations per industry standards
• Perform NDT using the appropriate method as detailed in the quality documentation.
• Understand inspection/test procedures to industry standards.
• Use own initiative to determine acceptance criteria.
• Undertake visual and dimensional inspections and complete appropriate documentation.
• Perform other duties as and when required by management.

Requirements:

• An NDT background with Level 2 in ultrasonic forgings / wrought products required in conformance with ISO 9712 such as PCN.
• Other qualifications would be advantageous especially MT, PT & ideally PMI experience.
• A background working with a wide range of materials and supplying into the oil & gas sector.
• Previous experience and certification working with forgings would be a distinct advantage however training will be provided.
• Ability to read and interpret engineering drawings.
• Ability to work unsupervised using own initiative.
• Computer literacy
• Excellent communication and people skills.
• Proactive ‘can-do’ attitude mixed with personal drive and motivation.

Overview

Performs technical duties under the supervision of pharmacists and pharmacist technicians to ensure safe, efficient and timely distribution of drugs in AH.

Job Responsibilities

1) Daily Operations

• Provide professional and courteous service to all patients/customers
• Process medication orders/prescriptions for both inpatient and outpatient
• Picking, packing and labelling in accordance with stipulated policies, guidelines and department standard operating procedures
• Perform billing functions
• Ensures work area is ready for daily operations
• Maintains the cleanliness of the pharmacy and ward areas where drugs are stored
• Involvement in workplace quality improvement projects/activities as and when required
• Cashiering duties

2) Inventory Management

• Ensures stocks are stocked up properly and tidily according to First-Expiry-First-Out (FEFO) requirement and stipulated storage condition
• Performs topping up of omnicell ward stock in the respective wards
• Ensures correct receiving of goods
• Secondary repackaging/redressing
• Carry out cycle counts and stock takes periodically according to SOPs

Requirements

• Minimum O Levels qualification
• Understands and usage of the in-house computer systems
• Able to work independently with minimum supervision and have good initiative
• Able to communicate effectively
• Able to function effectively as a member of a team
• Flexibility to work on weekends/ public holidays occasionally

If the role sounds interesting to you, please contact ‘[email protected]’ to understand more on the role. Please indicate the position that you are interested in the subject heading

• Inspecting bus air-conditioning system and mechanical/electrical components to diagnose issues accurately
• Conducting routine maintenance work aiming to bus air-conditioning system functionality and longevity
• 2-3 years experience working as air-conditioning technician for bus
• Obtained certificate for WSH Work at Heights
• 6 days work week
• able to work in shift

Candidate must possess at least a Professional Certificate, Diploma/Advanced/Higher/Graduate Diploma in Engineering (Electrical/Electronic), Engineering (Industrial), Others or equivalent.

Required language(s): Preferably English and Mandarin spoken.

At least 6 Year(s) of working experience in the related field is required for this position.

Preferably specialist in Engineering - Electrical or equivalent.

Must have knowledge in Instruments and Electrical System for Process Control Environment

Knowledge and understanding of SCADA, DCS System, PLC, Instrumentation, Field Devices.

Job Scope:

1) Maintenance of Field Instruments for multiple Process Plants

2) Troubleshooting and problem solving for field Instruments

3) Calibration and commissioning of field Instruments

4) Electrical equipment troubleshooting and general maintenance for the process plant

Salary: up to $5000 + case allowances

Working Days & Hours: Mon-Fri Office Hours

Location: One north

Job Description:

• Assisting surgeons in performing surgical techniques with company’s technology.
• Providing competent technical and clinical support when company’s technology is used by surgeons.
• Guide surgeons and other Operating Room Personnel in the safe and effective use new company’s technology.
• Ensuring appropriate instruments and implants are at the hospital and complete before each use
• Building positive relationships with customers on behalf of Sales Leads
• Identifying customer needs and recommends appropriate registered and available products to address them and/or pass it on to Sales Leads for follow up.
• Maintaining a thorough understanding of the company product lines; updates, features, benefits, surgical techniques independently.
• Adheres to compliance policy and guidelines at all times
• Assist the AD/SNM in coordinating, implementing and monitoring clinical and service quality performance indicators for continuous improvement

Job Requirements: Min VALID SNB & BCLS w min 2 yrs of operating theatre/orthopaedic experience

Interested candidates, please submit your resume to: [email protected]

Ally Audrey Lok Xin Woon

Recruit Express Pte Ltd (Healthcare & Lifescience)

Company EA Licence number : 99C4599

Personnel EA License: R21102307

[email protected]