• $2500 - $3300 + $60 handphone allowance
• Senoko
• Working hours: Mon - Fri 8am – 5pm, Sat 8am – 12pm

Requirements:

• Candidate must possess at least a NITEC, Professional Certificate in ( Electrical / Electronic / Mechanical) or equivalent.
• Must have basic Electrical/ Mechanical and Electronic background.
• Must have class 3 driving licence
• Able to start work immediately or short notice.

Job Responsibilities:

• Servicing, installation, testing and troubleshooting of electrical and mechanical parts at clients' premises or workshop.
• Access control, able to work under minimal supervision.
• Experience in Security System is a plus.

Leong Jia Qi Reg No. : R24124746

The Supreme HR Advisory Pte Ltd EA No. : 14C7279

Position: Lab Technician / Lab Assistant (Surface Finishing Chemical)

• Location: Tuas South Drive (Company transport from Boon Lay MRT)
• Working Day: 5 Days 830am-530pm
• Salary : $1800-$3000

Requirements

• Laboratory work is a plus
• Good knowledge of laboratory health and safety standards
• Diploma/Degree in Chemistry

Responsibilities

• Perform quality control daily
• ⁠Prepare standard solution and acids
• ⁠Handling chemical of plating industry
• ⁠Maintain lab cleanliness
• Carry out various testing procedures relating to customer needs

Chin Wai Loon Reg No: R24121618

The Supreme Hr Advisory Pte Ltd EA No: 14C7279

Roles & Responsibilities

The Assistant Chemist/Lab Technician reports to the Lab Manager and is responsible for the below:

Responsibilities

Sample Preparation

• Receive and label all samples brought into the lab for accountability.
• Prepare samples from drying, crushing, splitting and pulverising.
• Mix fluxing reagents and load samples in furnace for the fire assay.
• Mix reagents for acid digestions.
• Perform fire assay techniques such as fluxing, fusing and cupellation of samples.
• Perform smelting and sample extraction of precious metals as and when required.

Recovery of Precious Metals such as Gold and Silver

• Accurate usage of chemicals such as acids.
• Ensure proper usage of PPE.
• Proper operation of equipment such as furnace during smelting process.

Perform Laboratory Data Analysis and Reporting

• Testing of precious metals scraps through cupellation method (fire assaying).
• Evaluate, validate, ensure and report technical accuracy of reporting analytical results.
• Monitor analytical processes and take remedial actions where deviations / discrepancies arise impacting the quality of analytical results.
• Re-analyse analysis samples when control results are not within the acceptable range.

Quality Control

• Inspect samples, fusions, lead buttons and prills to ensure the assaying method is correct.
• Maintain records and accountability of materials (samples and standards) and equipment used.

Equipment Maintenance and Troubleshooting

• Report any apparatus or equipment which, to your knowledge, is not functioning correctly to the Lab manager.
• Assist in the procurement and placement of consumables, equipment and fixtures.
• Assist in the general / preventive maintenance of equipment and housekeeping of the laboratory.
• Maintain and record equipment faults.

Laboratory Housekeeping

• Ensure and maintain work areas and equipment are clean, tidy and organised.

Compliance with Safety Protocols and Local Regulatory

• Follow workplace safety initiatives.
• Ensure and maintain proper sample disposal of wastes or water generated as a part of daily work performed in a safe manner and in compliance with the disposal regulations and requirements.
• React appropriately and immediately to emergency situations and assists other employees in maintaining readiness to respond to emergencies within the workplace.

Job Requirement

Educational & Professional Qualifications

• Minimum Diploma qualification in Chemistry or its related field.
• Knowledge in safe handling of industrial chemicals.
• Possess effective verbal and written communication skills.
• Fearless of hot environment.
• Able to lift 10kg-15kg of chemicals or material.

Relevant Experience

• Problem solving skills.
• Have experience in selecting and setting up of equipment and processes to recover precious metals including gold, silver, platinum, palladium, rhodium is an advantage.
• Possess experience and the ability to operate ICP / XRF is an advantage.
• Must be willing to work overtime whenever necessary.
• Fresh Grads are welcome.

Benefits include:

• 2 Way Transport provided from Jurong East MRT.
• Medical and Dental Benefits.
• 5 day work week.

Benefits:

• Basic Salary up to $2,700 with yearly increment based on performance.
• Allowance and Attractive bonuses provided.
• 5 days work week include weekends & Public Holiday
• Our company emphasises on good career progression.
• Shift Work timings: (6.30am to 3.30pm), (8am to 5pm), (1.30pm to 10.30pm) – Depending on roster basis

Job Description:

This is a full time role for a Technician (Building Maintenance) located in River Valley Road. Our clients are pioneer companies that played an integral role in the country’s physical and economic transformation.

You will be responsible for performing preventive maintenance, repairs, and troubleshooting for mechanical and electrical systems. You'll conduct routine inspections of fixtures, fittings, cooling towers, and chillers, and supervise contractors during repairs and testing. Addressing fault reports, complaints, breakdowns, and customer service requests promptly is crucial. Additionally, you'll report any irregularities observed during maintenance, complete maintenance logs and schedules accurately and on time, and ensure compliance with building and fire safety regulations.

Qualifications:

• Minimum 2-3 years of relevant experience in building or facilities maintenance
• NITEC in Building Services, Electrical, Mechanical, Facility Technology or equivalent
• Good working knowledge in building, mechanical & electrical systems
• Able to work on rotating shift, public holidays and weekends

Grounded in a talent-centric mindset, Maker Lab is a marketing agency designed to build decentralised technology-led agency teams, rooted in collaboration with clients from the ground up. Maker Lab’s cross-functional teams of multidisciplinary specialists are embedded into client teams across digital marketing competencies — from measurement & analytics to content production.

Integrated Media Manager (Singapore)

Maternity Cover

As a Media Manager for our technology client, you will be responsible for collaborating with APAC-based and regional media agencies and internal stakeholders to manage ongoing cross-media initiatives and campaigns across multiple regions, assisting in implementing the regional rollout of global media planning tools. 

The person will be the day-to-day consultant on media strategy for the initiatives mentioned above, including but not limited to channel, audience and ad format strategy, best practices and optimisation to attain program efficiency goals. Basic knowledge of measuring channel/campaign effectiveness is useful for this role.

Role: 

• Manage central media projects that span all product areas, liaising with various local & regional agencies to collect and validate media data. 
• Attend meetings with relevant internal teams and agencies and be able to provide concise notes on key takeaways and actions. 
• Execute training to Marketing teams and agencies as global tools roll out in APAC.
• Provide exceptional support to run cross-channel initiatives in APAC and analyse results to surface key implications for the business.
• Manage agency workflow as it pertains to media, such as reporting, benchmarks and media forecasting.
• Own stakeholder narratives for internal regional, and global leadership on media plan strategy, reporting, roadmaps and learnings.

You:

• BA/BS degree or equivalent experience
• 5+ years of working experience within a marketing/media agency environment
• Solid project management skills and communication skills are mandatory 
• Strong proficiency with presentation software (e.g. Google Slides/PowerPoint) for producing presentations and Google Sheets/Excel for handling large data
• Strong data organisation skills, especially in Google Sheets, to efficiently summarise and present data (comfortable using pivot tables and functions)
• Experience in online/offline media strategy & brand planning experience
• High-level knowledge of channel/campaign measurement 

• Exceptional verbal and written English communications and presentation skills and - ideally - fluent in another Asian language to cover projects across APAC.

Please note: due to the high volume of applications, only successful candidates will be contacted with a follow-up introduction email.  If you do not receive an email from Maker Lab, your application has been unsuccessful this time around. Look out for future roles! By submitting your application, you consent to the collection, use and disclosure of your data by the Maker Lab team for the purposes of your application. Where your application contains personal data of third parties, you confirm that you have obtained all necessary consents to provide the Maker Lab team with such personal data and that we may collect, use and/or disclose such data in accordance with the Personal Data Protection Act 2012.

Benefit:

➡️ 5 days, 8am-5:30pm

➡️ Training Provided

➡️ Good career growth

➡️ AWS + Variable bonus

Job Scope:

• Operate and maintain machines used in production.
• Check products to make sure they meet quality standards.
• Fix simple machine or process issues to avoid delays.
• Follow safety rules and work instructions.
• Do basic maintenance and report broken equipment.
• Help with assembling, testing, and packing products.
• Keep records of production activities.
• Work with the team to meet production goals.

Requirement

✔️ Possess at least Nitec/Higher Nitec or relevant field

✔️ Relevant experiences will be advantage

To Apply, kindly click on the "APPLY NOW" button

We regret that only shortlisted candidates will be notified.

Staffking Pte Ltd (20C0358) | Angel Lee Yueh Lin (R24120071)

Position title : Hotel Maintenance

Location: Bugis

Working days : 6 days ; 8 hours/day

Salary : $2500- $3000 (depend on experience)

Responsibilities & Duties :

• Perform general maintenance and repairs on plumbing, electrical.
• Ensure guest rooms are well-maintained, including fixing plumbing, electrical, and furniture issues.
• Conduct regular inspections of hotel facilities to identify potential maintenance problems.
• Respond to emergency repair needs (e.g., burst pipes, electrical outages, power trip, water heater malfunction,promptly.
• Maintain the hotel’s exterior, including landscaping, parking lots, and outdoor lighting.
• Ensure all safety and security systems, including fire alarms, extinguishers, and emergency lights, are functioning.
• Work closely with housekeeping and management to address and resolve maintenance issues.
• Ensure compliance with safety, health, and environmental regulations.
• Maintain an inventory of maintenance supplies and tools.

Requirements:

• Proven experience in hotel or building maintenance .
• Ability to troubleshoot and solve problems quickly.
• Basic knowledge of safety and fire regulations.

✅The Supreme HR Advisory Pte Ltd EA No: 14C7279

✅SAMUEL SIAW Reg No: R24124745

Service Technician

Salary: $2500 - $3300 + $60 handphone allowance

Working Hours: Mon - Fri (8am – 5pm), Sat 8am – 12pm

Working Location: Senoko

Job Responsibilities:

• Servicing, installation, testing and troubleshooting of electrical and mechanical parts at clients' premises or workshop.
• Access control, able to work under minimal supervision.
• Experience in Security System is a plus.

Requirements:

• Candidate must possess at least a NITEC, Professional Certificate in ( Electrical / Electronic / Mechanical) or equivalent.
• Must have basic Electrical/ Mechanical and Electronic background.
• Must have class 3 driving licence
• Able to start work immediately or short notice.

Email: [email protected]

Tan Yong Zhi (Jackson) | Reg: R24124461

The Supreme HR Advisory Pte. Ltd | EA No: 14C7279

Responsibilities

• Proficient in mechanical equipment operations, maintenance, and team collaboration.
• Hands-on experience with pump overhauls, including centrifugal and diaphragm pumps.
• Familiar with performance matrix environments.
• Knowledge of Computer Maintenance Management Systems (CMMS), current Good Manufacturing Practices (cGMP), and Right First Time (RFT) techniques.
• Skilled in mechanical equipment troubleshooting and analysis.
• Capable of creating Job Safety Analysis (JSA) and Risk Assessments (RA) within documentation systems.

Requirements

• Minimum of 5 years of relevant experience in pharmaceutical, chemical, or petrochemical industries for senior positions; at least 2 years for junior positions.
• Willing to work in 12 hours rotating shift.

Tan Cheu Hoon, Fenny

EA License No.: 02C3423

Personnel Registration No.: R22105896

Job Description

• Industry/ Organization Type: Custom Die-cut Components Manufacturer
• Position Title: Process & Manufacturing Technician/Engineer (2D CAD Designer/Drafter)
• Working Location: Serangoon North
• Working Hours: Monday – Friday, 8am – 5.30pm
• Salary Package: Up to $3,800 + VB
• Duration: Permanent

Key Responsibilities

• Define manufacturing processes and estimates for new project introductions (RFQs).
• Design and define die cutting tooling.
• Prepare Process & Manufacturing documentation such as CAD Drawings, BOM, ECN, Control Plans, and Working Instructions.
• Evaluate manufacturing processes based on quality criteria, including efficiency, speed, and cost.
• Provide support for production troubleshooting and manage production delays.
• Promote continuous improvement in operational KPIs (Scrap, Efficiency, Cost, Yield, Customer Complaints, Audits, etc.).
• Optimize facility layouts, production lines, machine operations, and network performance.
• Implement cost-reduction strategies while maximizing quality.
• Train staff in both new and existing manufacturing processes.
• Collaborate with engineers, contractors, suppliers, and team members to improve processes.
• Ensure compliance with safety and environmental regulations in all manufacturing procedures.
• Study and upgrade systems and processes with new technologies.

APPLY NOW!!!

• Minimum of a Diploma/Degree in Engineering, preferably with at least 2 years of experience in a manufacturing or production environment.
• Prior experience in continuous process improvement culture/approach
• Proficient in CAD 2D software.
• Experience with ISO 9001 and ISO 13485 audits, Six Sigma, and lean manufacturing principles is highly desirable.
• Hands-on experience with laser machines will be an added advantage.

Kindly apply through ANY of the following methods:

• Submit your application by clicking the APPLY button;
• Email your resume to [email protected]. Please indicate #70614 on the email subject.

Anradus Application Policy: We value each application and ensure every resume is reviewed. Our process is efficient, typically concluding within 3 working days. If you do not receive communication from us within this timeframe, it's likely that your application has not been shortlisted by our client. In such cases, we recommend continuing your job search to maximize your opportunities.

Anradus Pte Ltd | EA License No. 20C0161 | Norman Wee | EA Reg No.: R23115114

Chemical Technician

Working Days & Hours: 3-4 Day | 8am to 8pm (12 hour rotating shift)

Working Location: Jurong Island (Transport provided at Jurong East)

Salary Range: $2000-$2600

• The Chemical Technician is responsible for monitoring and maintaining the operations of the process units and equipment by measuring, recording and controlling process operating parameters.
• Expected to diagnose and rectify systems and components’ faults in accordance to established procedures and specifications and to ensure that the process units and equipment operates safely and efficiently.

Job Responsibilities:

• Perform minor maintenance.
• Performing checks, start-up and shutdown operations on process equipment such as pumps and compressors.
• Carry out filter changes.
• Isolating piping systems for plant start-up, shutdowns, product grade change and troubleshooting operations.
• Adjusting process parameters to optimize process operations under supervision of Supervisors.
• Commissioning and decommissioning of process equipment.
• Performing emergency shutdown of process equipment
• Proper handing and blending of non-conforming and off specs products.
• Preparing plant equipment for maintenance
• Preparing chemicals, including mixing and dilution, for process operations
• Performing inter-tank transfers of chemicals and products based on established quality procedures.
• Performing emergency response activities and drills

Job Requirement:

• NITEC or Diploma in Chemical Process Technology
• At least 3 years’ working experience as Process Technician in a chemical industry

Tan Jia Jun | REG No: R23112681
The Supreme HR Advisory Pte Ltd | EA No: 14C7279

Benefits:

• Basic Salary up to $2,300 with yearly increment based on performance.
• 5 Days Work Week (Mon-Fri,8:30am - 5:30pm)
• Reimbursement of Transport claims from office to client site
• Company Medical Insurance and Approval Clinics Panel for staff Medical Consultation.
• Our company emphasises on good career progression and providing our employees attractive remuneration with generous bonuses.

Job Description:

This is a full time role for a Technical Specialist located in Ang Mo Kio. Our client makes sophisticated nurse call systems, enterprise reporting and analytics tools, and industry-leading software applications for caregivers and clinical staff and you will be responsible for performing preventive and corrective maintenance according to Standard Operating Procedures and Work Instructions. It also requires coordinating site work with sub-contractors and customers, as well as providing on-site support for systems testing, commissioning, and client training, both locally and overseas. Additionally, the position entails responding to emergency service calls during and after office hours, including public holidays, as part of a weekly standby rotation.

Qualifications:

• Fresh / Entry-level / Relevant Experience for NTC2 / ITE / Diploma in Electronics or IT Engineering background. Certificate for Electronics / IT Engineering will be required upon interview.

Working Days: Monday - Friday

Working Hours: 8:00am to 5:00pm

Salary: $2,800 – $3,100 + Allowances

Other benefits: Incentive, AL, Yearly increment, Yearly bonus etc.

Address: Gul Cres, Singapore 629532 (Gul Circle)

Company background:

A leading Singapore-based Agrochemicals (Pesticide & Fertilizer) Manufacturing & Trading Company.

Job Scope:

• Testing of different materials purchased by company for production of pesticide & their packing as per set specifications.
• Documentation of testing and their findings in according to ISO system and reporting of results to supervisor/ seniorResults shall be traceable to raw data
  All results shall be recorded in print format as well as Soft files
  
• Calibration of lab equipment's on periodic basis and maintain records of such activitiesMaintain Internal calibration record for HPLC, GC, UV, pH Meter etc.
  Train new staff on calibration of different equipment
  
• Record of stock of glassware, chemical, solvent, reference standard and other relevant consumables for smooth operation of laboratory activitiesEnsure all stocks are updated on last working day of every month
  Generate report and discuss for requirements to keep minimum inventory for different materials including chemicals, glassware, reference standards
  
• Co-ordination with production/ warehouse for smooth operation at production floorEnsure activates in lab shall be as per work allocation based on WOSU
  Ensure reports are shared with production promptly
  
• Inform any anomalies to production supervisor/ senior for immediate corrective action
• Ensure all test methods/standards used in lab are validated or supported by some valid reference, if any deviations observed make a not and take corrective action and ensure such deviations do not repeat in futureReport deviation to superior and take corrective action as per discussion, make record of deviations in NCR and record Corrective actions in CAR forms
  
• Use only reference standard with traceability to A- Standards and maintain a minimum quantity of reference standardTesting of technical material to create secondary standard and maintain record of such activity
  Ensure all secondary standards are traceable to A-Standards
  Ensure all A-Standards should have COA through out there shelf life, maintain record of A-Standard consumption
  
• Co-ordinate with outside labs for smooth functioning of production and day to day operations as per requirement
• Training of new staff and help them familiarize with company policies and proceduresIdentify short comings or training need of new staff from day to day work practice
  Communicate training needs with Manager/ Senior
  Decide on training schedule and source of training internal or external with Manager/ Senior
  
• Report your daily work and problems faced, to your supervisor/ senior for quick and long term solution
• Operation of WWT plant and testing of waste water samples as and when requirement arise

Job Requirement:

• Nitec or Diploma in Chemical engineering/ bioscience and relevant
• With 1 year experience is preferably
• Short notice is advantageous

Low Jia Yi R22104302

The Supreme HR Advisory Pte Ltd 14C7279

Our client is from Oil and Gas industry, a local leading player. They are looking for a Maintenance Technician for the next phase of their business. They are located in West.

Duties:

• Perform preventive, predictive, and corrective maintenance tasks as directed, and update the CMMS database.
• Maintain rotating and static equipment, plant piping, and structural support systems.
• Respond to and resolve equipment malfunctions, ensuring minimal downtime.
• Determine necessary materials, tools, and methods for safe maintenance tasks.
• Conduct machinery condition monitoring and field data collection with the production team.
• Ensure operational efficiency of all plant valves and mechanical components, including control and plant valve maintenance.
• Supervise in-house contractors and vendors, ensuring safety protocols are followed.
• Collaborate with the production team on mechanical system testing and troubleshooting.
• Take on additional tasks or responsibilities as assigned.
• Perform valve line-up and LOTO for maintenance preparations.
• Participate in the Company's Emergency Response Team (CERT) with assigned roles.

Requirements

• Nitec in Engineering related field.
• Min 5 years’ experience in Oil & Gas or Petrochemical industry
• Experience in troubleshooting of mechanical/ machinery systems

Interested candidates who wish to apply for the advertised position, please click APPLY NOW or email an updated copy of your resume/cv.

We regret that only shortlisted candidate will be notified.

Email Address: [email protected]

Recruitpedia Pte. Ltd.

EA License No: 19C9682

EA Personnel No: R2198636 (Oh Puey Xin)

Responsibilities:

• To provide an effective testing and analytical service to the plant ensuring that products manufactured are tested
• To specification on time and plant quality and safety goals are met.
• Ensure that all raw material, in-process and finished product testing and method transfer testing is carried out per
• Schedule and per GMP. Ensure that records are maintained to appropriate requirements.
• Perform biochemistry, analytical and raw material of in-process and marketed products for lot release in accordance with quality standards and procedures.
• Responsible for housekeeping duties in the lab. Perform Quality Tag Out for laboratory equipments such as freezer, water bath and etc.
• Support laboratory operations including but not limited to method transfer, equipment qualification, calibration, cleaning and maintenance, purchase and receipt of reagents and consumables, waste management, reagent and media preparation, critical reagent management and document management.
• Review lot release data, identify testing discrepancies and participate in laboratory investigations.
• Participate in inspection and ensure that the laboratory and documents are in a constant state of regulatory compliance and inspection readiness.
• To assist in writing SOP documents, Change plan or change records (document revisions) supporting continuous improvement of test procedures and assay sheet design.
• To carry out completion and review of GMP Documentation of data sheets or LIMS software.
• To carry out QC sample receipt, assay and release procedures.
• Support Audit preparation and any audit related activity
• Reading and understanding the test procedure and the requirements per USP, JP and EP.

Requirements

• Min. Degree in Biochemistry / Bioengineering or related science field of studies
• Prior QC lab / HPLC & GC experience required
• Comfortable to work 12 hours shifts
  

Interested candidates please send your updated resume in MS Word Format to:

[email protected]

Subject: QC Lab Analyst

or call 6736 3280 and ask for Kate

EA Personnel: Kate Leau Wei Xuan (R1552331)

Company Registration No.: 99C4599

Research Fellow (Postdoctoral) positions are available in the Computational Digital Pathology Lab (CDPL) at the Bioinformatics Institute (BII), Agency for Science, Technology and Research (A*STAR), Singapore. The AI-based Digital Pathology (AIDP) Program aims to develop and validate advanced AI and machine learning solutions, image processing, computer vision, and mathematical modelling for the pathological diagnosis and prognosis of cancer using digitized pathology slides, including both biopsy and whole standard slides.

The innovative AI-based Digital Pathology Diagnosis (AIDP) programme is a pioneering venture set to transform the landscape of AI pathological diagnosis and solve the global shortage of pathologists and increasing cancer cases with cutting-edge AI technologies. Our focus is on bridging gaps in data quality, model generalizability and market scalability. This groundbreaking initiative aims to advance pathology practices by developing artificial intelligence systems that accurately diagnoses cancer and other diseases from digital pathology images. By leveraging state-of-the-art AI technology and advanced methodologies, we strive to achieve breakthroughs that will revolutionize the way pathologists diagnose diseases, such as Lymphoma, Gastric, Colorectal and Breast cancers, ultimately improving patient outcomes and healthcare efficiency. This program is supported by national funding and led by esteemed institutions/hospitals and cross-disciplinary leaders in the field, providing an unparalleled opportunity for professional growth and collaboration with top-tier experts.

We are seeking passionate, talented individuals to join our dynamic team. If you are driven by curiosity and have a desire to be at the forefront of AI medical innovation, this is the perfect opportunity for you. As a member of our team, you will work in a stimulating environment where creativity and initiative are highly valued. You will have access to state-of-the-art facilities, high-quality data and other resources, and the chance to contribute to high-impact research that can shape the future pathology. Our focus is on creating robust, reliable AI systems that can assist pathologists in making faster and more accurate diagnoses, ultimately leading to better patient care and improving the life quality of humankinds. We are looking for candidates who are not only skilled but also enthusiastic about making a difference. Join us in this exciting journey and be a part of something truly extraordinary! For a research overview of our lab, please refer to https://www.a-star.edu.sg/bii/research/ciid/cdpl

Specific Technical Requirements:

• Proficiency in one or more programming languages: Matlab, C/C++, or Python, etc.
• Extensive knowledge, experience, and expertise in artificial intelligence, machine learning, pattern recognition, and digital image processing techniques.
• Practical coding skills in implementing numerical computational algorithms.
• Strong analytical and logical thinking skills to address and solve complex scientific problems.
• Familiarity with deep learning frameworks such as TensorFlow, PyTorch, or similar.
• Demonstrated ability to learn quickly and integrate knowledge across multiple disciplines.
• Experience or willingness to engage in collaborations with hospitals and clinical settings. Basic knowledge of cell biology or pathology is beneficial.
• Ability to present and articulate research findings at both internal and external seminars and conferences.
• Strong writing skills for both technical reports and scientific papers.

General Requirements:

• Highly motivated scientists or recent Ph.D. graduates eager to pursue a scientific career, particularly with a passion for artificial intelligence, machine vision, computer vision and biological image processing projects.
• At least 5 years of relevant experience
• Strong team player capable of conducting independent research under the guidance of the Principal Investigator (PI) and collaborating effectively with lab members.
• Quick learner with the ability to adapt to new technologies and methodologies.
• Robust understanding and knowledge of scientific and engineering principles.
• Excellent scientific and technical writing skills, coupled with outstanding communication abilities.
• Proven experience or strong interest in working within cross-disciplinary teams, including collaborations with hospitals and clinical researchers.
• Previous experience in AI and image analysis projects, whether in an industrial or academic setting, is advantageous.

The above eligibility criteria are not exhaustive. A*STAR may include additional selection criteria based on its prevailing recruitment policies. These policies may be amended from time to time without notice. We regret that only shortlisted candidates will be notified.

Job Description:

Monitor Product Quality Compliance

Perform routine and non-standard tests on materials, products and other Quality Control purposes using HPLC, GC, Empower system etc

• Identify OOS, deviations and quality problems
• Comply with Quality and HSE procedures when carrying out sampling and QC tests

Manage Laboratory Operations

• Perform routine calibration and maintenance of laboratory equipment
• Maintain integrity, accuracy and completeness of QC data and records

Optimise quality and efficiency of department workflows and activities

• Assist in preparing and participate for laboratory inspections and audits
• Compile data to support business and performance metrics reporting
• Gather information to support feasibility assessments of introducing new QC procedures, systems and equipment

Job Requirements:

• Diploma in science related
• At least one year experience in QC lab. Knowledge in operating HPLC and Empower software added advantage

Interested candidates do attach your resume to [email protected]

Attn: Angela Celeste Poh Li Ying (R2095367)

Recruit Express Pte Ltd (99C4599)

• 5 Days
• 830am-530pm
• $1800-$3000
• Tuas South Drive
• (Company transport from Boon Lay MRT)

Responsibilities

• Perform quality control daily
• ⁠Prepare standard solution and acids
• ⁠Handling chemical of plating industry
• ⁠Maintain lab cleanliness
• Carry out various testing procedures relating to customer needs

Requirements

• Laboratory work is a plus
• Good knowledge of laboratory health and safety standards
• Diploma/Degree in Chemistry

Leong Jia Qi Reg No. : R24124746

The Supreme HR Advisory Pte Ltd EA No. : 14C7279

Research Fellow (Postdoctoral) positions are available in the Computational Digital Pathology Lab (CDPL) at the Bioinformatics Institute (BII), Agency for Science, Technology and Research (A*STAR), Singapore. The AI-based Digital Pathology (AIDP) Program aims to develop and validate advanced AI and machine learning solutions, image processing, computer vision, and mathematical modelling for the pathological diagnosis and prognosis of cancer using digitized pathology slides, including both biopsy and whole standard slides.

The innovative AI-based Digital Pathology Diagnosis (AIDP) programme is a pioneering venture set to transform the landscape of AI pathological diagnosis and solve the global shortage of pathologists and increasing cancer cases with cutting-edge AI technologies. Our focus is on bridging gaps in data quality, model generalizability and market scalability. This groundbreaking initiative aims to advance pathology practices by developing artificial intelligence systems that accurately diagnoses cancer and other diseases from digital pathology images. By leveraging state-of-the-art AI technology and advanced methodologies, we strive to achieve breakthroughs that will revolutionize the way pathologists diagnose diseases, such as Lymphoma, Gastric, Colorectal and Breast cancers, ultimately improving patient outcomes and healthcare efficiency. This program is supported by national funding and led by esteemed institutions/hospitals and cross-disciplinary leaders in the field, providing an unparalleled opportunity for professional growth and collaboration with top-tier experts.

We are seeking passionate, talented individuals to join our dynamic team. If you are driven by curiosity and have a desire to be at the forefront of AI medical innovation, this is the perfect opportunity for you. As a member of our team, you will work in a stimulating environment where creativity and initiative are highly valued. You will have access to state-of-the-art facilities, high-quality data and other resources, and the chance to contribute to high-impact research that can shape the future pathology. Our focus is on creating robust, reliable AI systems that can assist pathologists in making faster and more accurate diagnoses, ultimately leading to better patient care and improving the life quality of humankinds. We are looking for candidates who are not only skilled but also enthusiastic about making a difference. Join us in this exciting journey and be a part of something truly extraordinary! For a research overview of our lab, please refer to https://www.a-star.edu.sg/bii/research/ciid/cdpl

Specific Technical Requirements:

• Proficiency in one or more programming languages: Matlab, C/C++, or Python, etc.
• Extensive knowledge, experience, and expertise in artificial intelligence, machine learning, pattern recognition, and digital image processing techniques.
• Practical coding skills in implementing numerical computational algorithms.
• Strong analytical and logical thinking skills to address and solve complex scientific problems.
• Familiarity with deep learning frameworks such as TensorFlow, PyTorch, or similar.
• Demonstrated ability to learn quickly and integrate knowledge across multiple disciplines.
• Experience or willingness to engage in collaborations with hospitals and clinical settings. Basic knowledge of cell biology or pathology is beneficial.
• Ability to present and articulate research findings at both internal and external seminars and conferences.
• Strong writing skills for both technical reports and scientific papers.

General Requirements:

• Highly motivated scientists or recent Ph.D. graduates eager to pursue a scientific career, particularly with a passion for artificial intelligence, machine vision, computer vision and biological image processing projects.
• Strong team player capable of conducting independent research under the guidance of the Principal Investigator (PI) and collaborating effectively with lab members.
• Quick learner with the ability to adapt to new technologies and methodologies.
• Robust understanding and knowledge of scientific and engineering principles.
• Excellent scientific and technical writing skills, coupled with outstanding communication abilities.
• Proven experience or strong interest in working within cross-disciplinary teams, including collaborations with hospitals and clinical researchers.
• Previous experience in AI and image analysis projects, whether in an industrial or academic setting, is advantageous.

The above eligibility criteria are not exhaustive. A*STAR may include additional selection criteria based on its prevailing recruitment policies. These policies may be amended from time to time without notice. We regret that only shortlisted candidates will be notified.

Job Purpose:

Ensure smooth laboratory operation activities, maintaining laboratory compliance standards to be inspection ready and shape a new MTO culture founded on collaboration, diversity, fostering reliability, productivity and innovation.

Job Responsibilities:

• Identify and report OOS, deviations, and quality issues
• Document and report testing activities and results
• Ensure compliance with Quality and HSE procedures during sampling and QC tests
• Manage laboratory operations by adhering to operational excellence models
• Perform routine calibration and maintenance of laboratory equipment
• Report OOS equipment issues and manage purchase requests
• Maintain the integrity, accuracy, and completeness of QC data and records
• Optimize workflows and improve quality and efficiency within the department
• Assist in laboratory inspections, audits, and compile data for performance reporting
• Propose improvements for QC procedures, activities, and workflows
• Gather information for feasibility assessments of new QC procedures, systems, and equipment

Requirements:

• Diploma in science related.
• At least one year experience in QC lab. Knowledge in operating HPLC and Empower software added advantage.
• Requires to work on shift.

Interested candidates, do submit your resume to [email protected]

All qualified applicants, please send in your resume to: [email protected]

EA Personnel Name: Audrey Chan Yu Jing
EA Personnel No: R1104782
EA License No: 99C4599

The Opportunity

• Our Client is an established and US MNC company
• Seeking for Senior Lab Technician
• Salary: $4500 - $5500 (Based on experience)
• Mon to Fri; office hours; 8:00am - 5:00pm
• Location: Ang Mo Kio, Singapore

The Talent

• Degree/Diploma in Electrical or Mechanical Engineering with 4 to 5 years of relevant experience
• Knowledge of battery design and safety standards affecting is a plus
• Experience with X-ray and CT scan for machine will be added advantage
• Knowledge of battery cells and packs, SoC, Memory and power adapters/supplies
• Knowledge of hardware product design and experience with dis-assembly, system and component analyses, and repair

The Job

• Ability to diagnose and determine the product and component failures, and monitor the trends
• Failure investigations, battery safety testing and designs of experiments.
• Under supervision of safety engineers, support the development and documentation of test procedures, test plan
• Coordinate with internal test/lab groups to ensure that testing across different technology space are aligned and meet standards
• Using scientific methods, conduct failure investigations and dis-assembly of products
• Knowledge of shipping and logistics within region.

Next Step

• Simply click on "Apply here" or email to [email protected] to drop your resume
• All shortlisted candidates will be contacted.

Edmond Lee
Direct Line: 8206 8857
EA License No: 91C2918
Personnel Registration Number: R23114813

Salary: up to $3000 + transport allowance

Duration: 1 year contract

Working Days & Hours: Mon-Fri Office Hours

Location: Woodlands

Job Description:

• Perform laboratory tests and experiments to assess product attributes, shelf-life, and stability.

• Troubleshooting and problem solving of lab equipment.

• Accurately record and maintain experimental data, reports, and other relevant documentation.

• Perform lab sample preparation and manage sample inventory.

• Oversee laboratory operations, ensuring equipment maintenance, inventory management, and a safe working environment.

• Implement and maintain safety protocols, conduct regular risk assessments, and ensure compliance with relevant regulations.

Job Requirements: Min Diploma in Sciences or similar

Interested candidates, please submit your resume to: [email protected]

Ally Audrey Lok Xin Woon

Recruit Express Pte Ltd (Healthcare & Lifescience)

Company EA Licence number : 99C4599

Personnel EA License: R21102307

[email protected]

Reports to the Property or M&E Executive/ Manager with specific responsibilities for the smooth operation and efficient maintenance of all M&E system, equipment and facilities of the Property.

Responsibilities:

• Co-ordinate and assist the Property Executive/ Manager in daily operation of the M&E Services.
• Carry out periodic inspection, preventive and corrective maintenance as per schedules and upkeeping of all equipment.
• Perform weekly checks on the building's fire-protection system - main panel and sub-panels, including troubleshooting on failure of fire-protection system.
• Attend to owner or occupier's building automation system, fire protection system and carpark system
• Attend to enquiries, complaints of breakdown, service requests relating to the building services.
• Maintain inventory and requisite purchase of electrical/ mechanical parts/ accessories according to the SOP.
• Supervise contractors to ensure work are carried out in accordance with work specifications in service contract and are in acceptable standard.
• Follow up on progress of rectification works and report to the Property Management team timely.
• Respond and attend to all emergency calls, after office hours and for reinforcement of manpower during major breakdown of equipment.
• Perform troubleshooting on any failure to the building's electrical/ mechanical system.
• Other duties in the building that may be assigned from time to time.

Requirements:

• N/ O Levels with at least 1 year's experience as building technician.
• Nitec / Diploma in Electrical / Mechanical / Building Services / Facility Management or other relevant field.
• Familiar with maintenance of building system, equipment and facilities.
• Ability to work as a team player as well as work independently.
• Open to work on rotating shifts, weekends and public holidays.
• Must be able to commit to 5.5 days.

Interested candidates, please submit your application with resume including the following information:

• Last drawn/ Current salary
• Expected salary
• Notice Period

About the Company:
Our client is one of the leading pharmaceutical ophthalmic solutions manufacturers in the world, dedicated in providing sterile pharmaceutical ophthalmologic solutions, from prevention to delivery of care at every touchpoint, advancing wellness in hospitals, clinics and home-care sectors.

Position Overview:
The incumbent works closely with the QC Manager on all aspects of Quality Control in the labolatory, in particular, on product reliability and compliance to all established product standards. Ensures that all aspects of quality within the organization is upheld.

Responsibilities:

• Able to provide guidance and coach lab technicians.
• The incumbent inspects all incoming raw material for compliance according to current standards.
• The incumbent conducts periodic checks and analysis on all WIPs.
• The incumbent retains finished product samples from production to conduct checks and analysis.
• Assist QA on failure analyses, corrective and preventive action response to customer’s complaint.
• Assist in GMP audits, validation, qualification and change control.
• Assist in maintaining Product Quality and Technical File.
• Write technical papers or reports or prepare standards and specifications for processes, products, or tests.

Requirements:

• Diploma/Degree in related field (Chemical Process Technology, Pharmaceutical, Chemistry, Biotechnology).
• Proven experience in the evaluation and validation of materials, products, or processes, adhering to regulatory standards.
• In-depth knowledge of the cGMP and ISO 13485.

How to Apply:

Interested candidates, please submit your updated resume by using Apply button

*We regret to inform that only shortlisted candidates will be informed.*

Sarah Sevilla

Registration Number: R22107553

EA License No: 18C9027

Working hours: 3 rotating shift work (3 rest day every 2 weeks)

Morning – 7am to 4pm

Afternoon – 2pm to 11pm

Night – 10.30pm to 7.30am (night shift allowance at $14/night)

Location: CBD area

BASIC + AWS + PERFORMANCE BONUS!

Responsibilities

• Perform daily operational activities which includes attending to customer's enquiries, needs and complaints.
• Perform preventive and breakdown techinical support and maintenance for mechanical/electrical services, plumbing & sanitary services, Aircon servicing and maintenance, ACMV systems, chillers and electrical control.
• Perform electrical related work for all Low and High voltage systems, and preventive & breakdown technical support.
• Inspect and maintain site electrical equipment.

Requirements

• Candidate must possess Licensed Electrical Worker (LEW) Certified Grade 7
• Recognized techincal certificate in Mechanical & Electrical, Building Services, Facility Technology or its equivalent.
• Candidates with WSQ qualifications are welcome to apply.
• Possess hands on and technical knowledge with minimum 3 years' experience in Facilities Management.
• Able to perform shift work

Please submit your updated resume by using the APPLY NOW BUTTON

By submitting your personal data and/or resume to us in connection with your job application, you will be deemed to have agreed and consented to us in collecting, using, retaining, and disclosing your personal data and/or resume to prospective employers for the purpose of the evaluating, processing and administration by company relating to this job application.

We regret to inform that only shortlisted candidates would be notified

We wish you all the best in your career search.

You are welcome to visit our website at www.rdtpsg.com

RD Trusted Partners Pte Ltd| EA License No.: 24C2352

Chee Wei Qian (Sandy) | EA Personnel No.: R24125920