Service Desk Engineer

We are looking for experienced full-time Service Desk engineer to provide End User Computing or Service Desk support to APAC Region in Singapore.

Job Responsibilities:

• Provide level 1.5 End User Computing support and well verse in Windows OS
• Diagnosing end-user system failures and implement repair solutions.
• Diagnosing printer and other peripheral devise failures and implement repair solutions.
• Troubleshooting network devices in order to ensure connectivity from the PC to the Network.
• Providing installation and upgrading services of hardware and software.
• Configuration and troubleshooting of phones and other mobile devices, tablets, and PDAs.
• Setup and troubleshooting audio/video equipment such as projectors and video conference equipment

Job Requirement:

• Diploma/Bachelor’s degree in computer science / information technology or relevant field.
• At least 1-1.5 years of relevant working experiences.
• Knowledge of multiple manufacturers and operating systems.
• Excellent troubleshooting capability.
• Using established procedures and working under immediate supervision, performs assigned tasks.
• Work is routine and instructions are usually detailed.
• Resolves routine questions and problems and refers more complex issues to higher levels.
• A good team player.
• Excellent interpersonal skills.
• Customer centric and focus on service excellence.
• Excellent problem-solving and multitasking skills.
• Good verbal and written communication skills and ability to interact with other teams.
• Working location: Central, Singapore

It would be appreciated if you can share with me your interest on the same.

Have a friend or family member who may be interested in taking the next step in their career? Help them out by referring them to Ennovatez.

You can email your resume to us at [email protected]

**6 months contract (on-site)

Company Summary:
Since 2002, DVI Solutions has been a leading provider of audio-visual setups to help our clients communicate and collaborate better--whether it's with colleagues across the office, or partners on the other side of the world. We have presence in Singapore, Thailand, Shanghai, Hong Kong, Philippines, Malaysia and Indonesia. Our satisfied clients include corporations, government agencies, schools, retail stores, hotels and many more across Asia.

Summary:

The Managed Service Technician provides technical support (level 1 troubleshooting) and expertise for clients, ensuring their IT systems are running efficiently. They handle incidents, perform regular maintenance, and support the deployment of new solutions, ensuring compliance with service level agreements.

Responsibilities

Technical Support (level 1 troubleshooting)

• Diagnose and resolve hardware and network issues for clients.
• Provide on-site support as needed.
• Respond to tickets and inquiries within agreed timelines.

System Maintenance:

· Monitor and maintain client systems, networks, and servers.

· Perform regular updates, backups, and preventive maintenance tasks.

· Ensure all systems are patched and protected against vulnerabilities.

Installation and Configuration:

• Install and configure hardware and networking equipment.
• Deploy new systems and applications based on client requirements.
• Document configuration changes and create support materials.

Client Management:

• Communicate effectively with clients to understand and address their IT needs.
• Provide guidance and recommendations for improving IT operations.
• Maintain strong relationships and ensure client satisfaction.

Incident Management:

• Escalate complex issues to higher-level technicians or engineers.
• Document incidents and resolutions in ticketing systems.
• Analyze recurring problems and suggest long-term solutions.

Qualifications

Experience:

• 1+ years in IT support, network administration, or a related role.
• Open to fresh graduates with at least a Diploma in Engineering or any IT hardware related certification

Technical Skills:

• Knowledge of networking protocols, firewalls, and routers.
• Experience with IT hardware
• Experience with audio visual technology would be advantageous

Soft Skills:

• Strong communication and interpersonal skills.
• Excellent problem-solving and analytical abilities.
• Ability to work independently and collaboratively.

Work Environment:

• On-site and office work depending on client needs.

DVI Solutions is an Equal Opportunity Employer. Qualified applicants are considered for employment without regard to age, race, color, religion, sex, national origin, sexual orientation, disability, or veteran status.

Benefits

1. Location: Work at Changi, East Region
2. Career Growth: Gain valuable experience in air freight, with opportunities to develop your skills in customer service and logistics.
3. Team Spirit: Join a supportive and dynamic team where collaboration and learning are encouraged.
4. Work-Life: Enjoy alternate Saturdays off after confirmation and 14 days of annual leave to recharge.
5. No Experience Needed: Fresh faces are welcome! Comprehensive training provided for those eager to learn and grow.

Job Description

Are you ready to embark on an exciting career in air freight? We are seeking enthusiastic and organized individuals to join our team as Air Export Customer Service Representatives. You’ll play a crucial role in managing our clients' air export needs, providing exceptional service, and coordinating with our operations team to ensure smooth shipment arrangements. This is your opportunity to thrive in a fast-paced, global logistics environment.

Roles & Responsibilities

• Support assigned customers and overseas agents by managing sales quotations, RFIs, RFQs, and inquiries.
• Book air export shipments with airlines and co-loader agents, ensuring timely follow-ups.
• Handle air export billing, invoice verification, and resolve rate disputes efficiently.
• Coordinate with clients, sales teams, overseas agents, and operations staff to ensure successful shipment arrangements.
• Perform additional duties as requested to support team goals.

Requirements

• Skills: Proficiency in MS Office (Word, Excel, PowerPoint) and data entry. Excellent command of English and Mandarin to liaise with Mandarin-speaking associates.
• Experience: Experience in air freight is a bonus, but not required. We welcome fresh candidates willing to learn.
• Attributes: Team player with a proactive attitude. Strong organizational skills and the ability to handle inquiries efficiently. Willingness to work overtime if necessary.

Additional Information

• Location: No. 9, Airlines Road, #02-16 & #02-17, Cargo Agents Building ‘D’, Changi Airfreight Centre, Singapore 819827.
• Working Hours: Monday to Friday, 9 am – 6 pm. Saturday, 9 am – 1 pm (alternate Saturdays off upon confirmation).
• Leave: 14 days of annual leave after confirmation.

Roles & Responsibilities

M&E Engineer is responsible for :-

JOB DESCRIPTION:

· Monitor and report on the progress of work to project manager;

· Control the progress of shop drawings, technical submissions and equipment/material procurement/fabrication/delivery status for on-time completion.

· Coordinate with client’s representatives, consultants, and subcontractors on all technical matters, including submission of method statement, drawings, materials, samples and work progress;

· Control site progress & installation quality as per approved;

· Carry out inspection of M&E works prior to concreting or subsequent construction works;

· Assist in supervising and coordinating work closely with other departments;

· Assist for submission of evaluation of progress claim, variation work to M&E Manager

· Participate in all relevant project meetings;

· Responsible for carrying out M&E technical meetings and resolving technical issues with record;

· Responsible for M&E drawing coordination and production of CSD and individual service drawings quality;

· Responsible for conducting inspection to meet with construction schedule;

· Provide and maintain all site inspection records & T&C records up to date;

· Ensure quality of MEP workmanship and compliance with safety and environmental requirements;

· Provide and maintain all site inspection records & T&C records up to date;

· Allocate work and ensure jobs are correctly and properly achieved within standards and SOP.

REQUIREMENTS:

· Diploma / Degree in Mechanical or Electrical Engineering;

· Min of 2 years’ work experience related projects in Singapore building and construction industry;

· Strong Electrical/Mechanical knowledge with hands-on experiences;

· Sound knowledge in BIM, Revit, Autocad would be an advantage;

· Good communication skills with the ability to coordinate with site teams to execute work

Job Responsibilities:-

• Define, architect and document the Design-for-Testability (DFT) concept for SOC’s
• Develop, implement and verify DFT measures
• Work closely with cross-function teams (design/verification, physical, and operation) to ensure all test requirements are met and DFT function is correctly implemented for effective DFT solutions
• Achieve target structural test coverage for logic, memories, serdeses and other mixed signal IPs
• Test pattern generation/verification/post-silicon ATE support

Job Requirements:-

• Master's or Bachelor Degree in Electronics and Communications Engineering or equivalent
• Minimum 10 years of working experience in DFT field
• Good knowledge in Boundary Scan, ATPG Scan, Synopsys SMS and/or MBIST is a must
• Working experience in industry standard tools like Test Kompress, DFT advisor, DFT Compiler, Mentor’s SSN and OCC controller are desirable
• Knowledge of full VLSI RTL2GDSII design flow
• Knowledge in high level programming and script writing
• Knowledge in HDL, synthesis, static timing analysis and constraining will be an added advantage
• Some Experience in Test development and Product engineering

Location: Next to Bendemeer MRT

Interested candidates may submit detailed CV with the following info:-

• Current salary, including AWS or Variable Bonus
• Expected salary
• Availability

Job Description

• Carry out routine maintenance and repair work (Machine and Facilities)
• Perform plumbing, painting, and minor repairs
• Provide technical support and training to staff
• Implement preventive maintenance schedules
• Ensure compliance with health and safety regulations

Job Requirements

• Electrical/Mechanical engineering knowledge is an advantage
• Machinery repair and maintenance is an advantage
• Able to work as a team and individually
• Must be willing to be hands on
• Able to do overtime and work on Saturday and Sunday if required

Job Description

Reporting to the Project Manager/Engineering Manager, successful applicants will be involved in Power supply system and switching mode power supply development activities such as electrical circuit design, magnetic design, prototyping, evaluation and assisting manufacturing in BETA run of the new product.

Key Skills & Responsibilities

• Understand customer requirement to design or modify XP product to provide Added Value (AV) Solution based on XP design criteria and procedure
• Maintain an in-depth knowledge of all XP products to identify and select the most suitable product for Engineering Solution design.
• Design new products in timely manner to meet the product spec, modify existing designs, improve existing products for better performance and /or cost
• Proposed AV or modified solution based on sales/customer requirements.
• Perform product verification & validation test such as electrical performance, thermal, EMC and DVT to ensure product meet specification before delivered to customer.
• Electrical circuit and schematic design
• Embedded systems design both in hardware
• Firmware design knowledge will be an added advantage.
• Bill of materials (BOM) creation and documentation.
• Breadboard and prototype samples making and debugging
• Design new solution/product within XP standard design practice, safety guidelines, agreed timescales and costs.
• Performed product (AV and modified model) verification and validation, such as electrical performance, thermal, EMC and DVT evaluations,
• There will be some travelling required in conjunction with customer and manufacturing support as well as outside training

Qualifications

Knowledge/Qualifications/Attributes

• Minimum bachelor’s degree in electrical/electronic or higher degree in a related engineering field.
• More than 3 years electrical design experience of power supply/power system; those with more than 5 years’ experience will be considered for senior position.
• For Senior position, Identifies, and review projects main task, schedules, and technical challenges on project delivery timely is required.
• Good project management skill and capable of leading long-term structured problem-solving projects for senior position.
• Familiarity with PCB design using Altium/PADS will be an added advantage.
• Requires good communication, reasoning, problem solving and analytical skills.
• Hardworking, dynamic, strong responsibility and a good team play

About DKatalis

DKatalis is a financial technology company with multiple offices in the APAC region. In our quest to build a better financial world, one of our key goals is to create an ecosystem-linked financial services business.

DKatalis is built and backed by experienced and successful entrepreneurs, bankers, and investors in Singapore and Indonesia who have more than 30 years of financial domain experience and are from top-tier schools like Stanford, Cambridge London Business School, JNU with more than 30 years of building financial services/banking experience from Bank BTPN, Danamon, Citibank, McKinsey & Co, Northstar, Farallon Capital, and HSBC.

About the role

You will be part of a cross-functional agile engineering team (squad) responsible to build, deploy and run (support) one or more of our digital products, focusing on full-stack experience to build robust & resilient systems (front-end & back-end).

You will work closely with Engineers, Product, Design, and other stakeholders, collaboratively ensuring quality gets built in the product, get to see your impact in everyday lives of many people, and have great fun while doing it.

You will share your learnings within and beyond your team (squad) and mentor budding engineers for good engineering practices

What will you do

• Working with engineering+product owners to design, refine and develop the product, from concept to implementation.
• Main contributor in creating best in-class product & experience for our customers by designing, building, scaling, and evolving our platforms, services, and tools
• Communicate, collaborate and work effectively across cross functional teams in a multicultural environment
• Mentor a team of highly talented and motivated engineers
• Ensure the performance, security, and responsiveness of applications built
• Continuously improve code quality, product execution, automatization and customer delight

What you need to have

• You have at least 10+ years of professional experience in a similar role developing highly scalable applications
• Good written and spoken English
• Hands on expertise in Java / Javascript or its derivatives (Typescript, NodeJS, Scala, Kotlin, Springboot, etc)
• Have hands on experience on one of this front-end development (Flutter Preferred)
• Experience to Lean/XP practices (TDD, Pair Programming, Continuous Integration/Delivery for both Mobile & Back-end)
• Experience working in Agile Software development
• Communicate, collaborate, and work effectively across distributed teams in a multicultural environment.
• You’re excited about delivering end-to-end experiences and care about your software architecture across the front-end, back-end, and the APIs that glue them together
• A passion for quality and best practices but with a pragmatism that understands the
  balance between perfection and delivering value in a timely manner.
• Enjoys mentoring more junior engineers on good engineering practices & share knowledge

As a Process Development Engineer, you will be primarily responsible for starting up, developing and optimizing processes to improve product quality and reliability, working on process yield improvement, cost reduction, productivity improvement and risk management as well as resolving manufacturing line problems. You will also be required to identify, diagnose and resolve assembly process related problems by applying failure analysis, FMEA, 8D or SPC/FDC methodology. Additional responsibilities include coordinating and carrying out process, equipment and material evaluation/optimization to implement changes at process step, leading and participating in yield improvement and cost reduction activities, handling new process baseline qualifications and managing, auditing and liaising with material suppliers to achieve quality, cost and risk management objectives.

• Excellent execution on assembly process for 1st New Product Introduction (NPI) success and smooth transfer process from NPI to HVM
• Excellent execution of the qualification of NPI products / packages build that proliferate from the pilot products and packages according to planned timeline
• Full responsible on support NPI business process with process TRA, POS, PFMEA/QCP, risk mitigation and documentations.
• Deliver BIC yield and cost on product NPI with integration of DFx BIC package solution, process guideline and design rules.
• Collaboration with cross functional team from NPI to LVM/HVM process transfer.
• On-time execution of NPI Customer samples and Engineering Samples build for new products and packages

SME Process Owner Responsible for Continuous Improvement on Process Yield, Defect Elimination and Process Characterization

• Process owner to perform on-time detection with data analysis for process yield improvement. Lead the defect elimination and continue improvement action, with problem solving methodology, statistical analysis and integration solution decision.
• Process owner to develop process recipe for BIC UPH, conducting process characterization to define process parameters and boundary.
• Continuous develop in depth assembly process technical knowledge, well understand process capability/tolerance//spec limit/CpK, and utilize key tools PFMEA/QCP/APC/FDC/Alarm on assembly processes Cz/Development/NPI.
• Global leader for cross team collaboration on network BKM, process recipe spec and recipe standardization/conversion.

Technology enablement and development – Process, Material, Equipment

• Participate and support Product Roadmap, to enable key process capability and technology development to ensure packaging solution is ready prior 1st Qual Silicon deliver.
• Frequent engagement with equipment and material supplier (at least interval of monthly or daily/weekly for process issues)
• Collaboration with Supplier and involvement Supplier Roadmap (Material/Equipment/OSAT), to understand market trends and competitor’s direction, ensure key process technology and capability enablement is in-line.
• Frequent review and participant Competitor Analysis, to understand market trends and competitor’s technology/capability boundary
• Engage and follow PDE business process (TGR, TORB, KEG interlock) for new technology qualification, alignment and safe launch

Teamwork and General expectation

• Trainer/Buddy/Mentor for new team members, build effective relationships within team and cross team (peers, counterpart)
• Regularly review data and direction with supervisor. Demonstrate sound data analysis and judgment. Present reports and findings with appropriate conclusions, recommendations and decision making.
• Develop, or coordinate development of, training materials for existing/new process
• Safety Identify and promptly report hazards, follow safety procedures and area work rules including proper PPE, lockout and chemical safety.

Requirements:-

• Masters or Bachelor's degree in Mechanical/ Materials Engineering
• Experience in backend engineering process or package development preferred
• Good technical knowledge in component test and/or module manufacturing process
• Excellent data analysis, statistical analysis, data interpretation skills
• Ability to make sound data-driven decisions. Prioritize and apply due-diligence in day to day task.
• Possess analytical and problem solving skills
• Keen interest in semiconductor engineering
• Showcase leadership experience and potential

Location: 534 Upper Serangoon Road
Salary: $3,000
Working Hours: 4-day work week, 12-hour shifts (1-hour break)
Benefits: Food provided

Key Responsibilities:

• Provide excellent customer service
• Manage customer orders
• Assist in maintaining cleanliness and organization of the front area

Requirements:

• Singaporean Only

For interested applicant, click 'apply'

EA Reg no: R1328476
EA License No: 16C8443
EA Personnel Name: Melody
EA Personnel No: R2095899

Location: 534 Upper Serangoon Road
Salary: $3,000
Working Hours: 6-day work week, 12-hour shifts (1-hour break)
Benefits: Food provided

Key Responsibilities:

• Provide excellent customer service
• Manage customer orders
• Assist in maintaining cleanliness and organization of the front area

For interested applicant, click 'apply'

EA Reg no: R1328476
EA License No: 16C8443
EA Personnel Name: Melody
EA Personnel No: R2095899

Key Responsibilities:

• Development of Analog/Mixed-Signal circuits from specifications to prototypes.
• System-level analysis and evaluation, full-chip architecture design, analysis, modeling, simulation, and integration.
• Schematic entry, corner simulation, layout consideration, and post-layout simulation.
• Work closely with the layout engineer to conduct the physical implementation (layout) and chip floor planning.
• Responsible for post-layout extraction and parasitic analysis.
• Able to work with other designers, Chip Architects, and layout engineers to achieve full-chip integration, place and route, top-level verification, and tape out.

Requirements:

• Ph.D./Master/Degree in Electrical Engineering or Microelectronics with excellent technical background in Analog /Mixed-Signal IC design
• Min. 3 years of experience in CMOS Analog IC design and simulation
• Good design experience in Analog IC design involving two or more of the following blocks: low noise pre-amplifier (low offset, high CMRR, high PSRR and bandwidth up to 600MHz), CMOS Gigahertz Oscillator, switched capacitor circuit, LDO, Differential Amplifier, comparator, Opamp, TIA, and Bandgap Reference and high-frequency full-wave rectifier, etc.
• Good design knowledge in ESD and Latch-Up.
• Experience in isolator devices (capacitive-coupler or optical-coupler) and photodetector-associated circuits will be an added advantage.
• Experience with sigma-delta modulators and IO drivers will be an added advantage.
• Good working knowledge of relevant analog IC design and simulation tools (Spice or its equivalent)
• Basic understanding and can develop simple design-related scripts with some common script languages, such as perl, Tcl, matlab or cadence skill etc.
• A team player with good communication skills.
• Able to work independently, flexibly, and creatively.
• Candidates with no prior working experience are welcome to apply.

Key Responsibilities:

• Development of Analog/Mixed-Signal circuits from specifications to prototypes.
• System-Level analysis and evaluation, full-chip architecture design, analysis, modeling, simulation, and integration.
• Schematic entry, corner simulation, layout consideration, and post-layout simulation.
• Work closely with the layout engineer to conduct the physical implementation (layout) and chip floor planning.
• Responsible for post-layout extraction and parasitic analysis.
• Able to work with other designers, Chip Architects, and layout engineers to achieve full-chip integration, place and route, top-level verification, and tape out.

Requirements:

• Ph.D/Master/Degree in Electrical Engineering or Microelectronics with excellent technical background in Analog /Mixed-Signal IC design.
• Min. 5 years of experience in CMOS Analog IC design and simulation.
• Good design experience in Analog IC design involving two or more of the following blocks: low noise pre-amplifier (low offset, high CMRR, high PSRR and bandwidth up to 600MHz), CMOS Gigahertz Oscillator, switched capacitor circuit, LDO, Differential Amplifier, comparator, Opamp, TIA, and Bandgap Reference and high-frequency full-wave rectifier, etc.
• Good design knowledge in ESD and Latch-Up.
• Experience in isolator devices (capacitive-coupler or optical-coupler) and photodetector-associated circuits will be an added advantage.
• Experience with sigma-delta modulators and IO drivers will be an added advantage.
• Good working knowledge of relevant analog IC design and simulation tools (Spice or its equivalent).
• Basic understanding and can develop simple design-related scripts with some common script languages, such as perl, Tcl, matlab or cadence skill etc.
• A team player with good communication skills.
• Able to work independently, flexibly, and creatively.

SALARY:

Junior - ($4,200-$5,000)

Senior - ($5,000-$6,000)

LOCATION:

Ang Mo Kio / Yio Chu Kang / Central

Job Description

•Manage & Lead the electrical team.

•Perform engineering duties such as design, engineering calculations, planning, tender.

Preparation/evaluations as part of the engineering project team

•Team development

•QA/QC documentation review of engineering deliverables

•Liaison with clients, project managers, architects, contractors

•Resolve any technical problems faced during project design and/or construction stages

•Suggests ways to increase revenues and efficiency.

•Testing & Commissioning of the ACMV Electrical Systems.

•Ensure the team follows all electrical codes and standards.

Job Requirements

•Any qualification in a relevant engineering field with minimum 5 years of related working experience

in the Construction Electrical Field associated with ACMV / Electrical.

•Engineering design of commercial buildings, major infrastructure transportation projects and

mixed-use developments

•Possess design experience and good understanding of ACMV / Electrical technical systems and

procedures:

•Possess knowledge on all cabling, loading and sizing calculations and equipment selections such as

cable, generators, panels, etc.

•Develop, design through establishing, design briefs, design reports, calculations, schematics,

schedules, specifications, concept, Preliminary, Detailed and Construction Engineering Designs

•Productions of drawings and developing models

•Site Experience, Testing & Commissioning Experience

•Having experience working with Infrastructure Projects would be an added advantage.

If you do not possess the above experience, your application will still be considered on individual merits and you may be contacted for other opportunities.

By submitting your personal data and/or resume, you give consent to the collection, use, and disclosure of your personal data and/or resume by the company (or its agent) for the purpose of the processing and administration by the company relating to this job application.

Please be notified that only shortlisted candidates will be notified.

EA Personnel.: Chan Jun Wei

EA Registered no.: R1543992

Recruit Now Singapore Pte Ltd

EA License no.: 21C0845

Office Location : Tai Seng

Working hours : Monday to Friday | 8am to 6pm | Saturday 8am to 12pm

Salary (commensurate with experience) : Up to $5,000 + Variable Bonus + Annual Leaves + Medical Benefits

Industry : Construction Sector - A&A / Building Works

Job Description

•Check and analysis drawings, authority requirements and tender specifications

•Check site installation whether it is in accordance to design and standards

•Oversee the projects, ensure compliance of contracts and the drawings with regulatory specifications.

•Able to coordinate with owners, architects, consultants, project managers, sub-contractors and suppliers.

•Attend meetings with architects and consultants

•Other ad-hoc duties as assigned

Job Requirements: Possess at least diploma in Electrical Engineering and Mechanical Engineering (M&E) or equivalent

•However, entry level are encouraged to apply, from recognized University by Singapore PE Board as training will be provided.

•Good operational planning for construction projects

•Good in communication and written abilities

•Required skill: Able to use Microsoft Project to present schedule to the client

•Knowledge in Construction and Renovation.

•Skills required: Autocad

Maxhunt Resource Pte Ltd | EA Licence: 22C1322
Loh Wing Sheng | Registration No: R22110239

Key Benefits:

• Competitive basic salary up to $2,700 plus $30 monthly allowance, OT pay, and variable bonus (gross salary up to $3,000).
• 5-day work week, including weekends and public holidays.
• Shift work allows flexibility with morning, afternoon, and evening shifts available.
• Hands-on experience with a variety of building, mechanical, and electrical systems.
• Located at River Valley Road, with opportunities for career development.

Job Description:

We are seeking a skilled and service-oriented Technician (Building Maintenance) to join our team. You will be responsible for maintaining and repairing mechanical and electrical (M&E) systems, performing routine inspections, and ensuring compliance with safety regulations. If you have a passion for hands-on work and take pride in keeping buildings running smoothly, this role offers excellent growth opportunities.

Roles & Responsibilities:

• Provide maintenance, repair, and servicing for building systems.
• Conduct preventive maintenance and troubleshooting for M&E systems.
• Perform routine inspections on M&E fixtures, cooling towers, and chillers.
• Supervise term contractors in repair and testing of M&E services.
• Attend to fault reports, breakdowns, and customer service requests.
• Accurately complete maintenance logs, schedules, and reports.
• Ensure compliance with building and fire safety rules.

Requirements:

• Minimum 2-3 years of relevant experience in building or facilities maintenance.
• NITEC in Building Services, Electrical, Mechanical, or Facility Technology.
• Good working knowledge of building, mechanical, and electrical systems.
• Basic proficiency in MS Word and Excel.
• Independent, self-motivated, and a team player with a service-oriented mindset.
• Willingness to work on rotating shifts, public holidays, and weekends.

Additional Information:

• Location: River Valley Road.
• 5-day work week, including weekends and public holidays.
• Shift timings: 6:30am-3:30pm, 8am-5pm, 1:30pm-10:30pm (rotating roster).

Key Responsibilities:

• Development of Analog/Mixed-Signal circuits from specifications to prototypes.
• System-level analysis and evaluation, full-chip architecture design, analysis, modeling, simulation, and integration.
• Schematic entry, corner simulation, layout consideration, and post-layout simulation.
• Work closely with the layout engineer to conduct the physical implementation (layout) and chip floor planning.
• Responsible for post-layout extraction and parasitic analysis.
• Able to work with other designers, Chip Architects, and layout engineers to achieve full-chip integration, place and route, top-level verification, and tape out.

Requirements:

• Ph.D/Master/Degree in Electrical Engineering or Microelectronics with excellent technical background in Analog /Mixed-Signal IC design
• Min. 8 years of experience in CMOS Analog IC design and simulation
• Good design experience in Analog IC design involving two or more of the following blocks: low noise pre-amplifier (low offset, high CMRR, high PSRR and bandwidth up to 600MHz), CMOS Gigahertz Oscillator, switched capacitor circuit, LDO, Differential Amplifier, comparator, Opamp, TIA, and Bandgap Reference and high-frequency full-wave rectifier, etc.
• Good design knowledge in ESD and Latch-Up.
• Experience in isolator devices (capacitive-coupler or optical-coupler) and photodetector-associated circuits will be an added advantage.
• Experience with sigma-delta modulators and IO drivers will be an added advantage.
• Good working knowledge of relevant analog IC design and simulation tools (Spice or its equivalent)
• Basic understanding and can develop simple design-related scripts with some common script languages, such as perl, Tcl, matlab or cadence skill etc.
• A team player with good communication skills.
• Able to work independently, flexibly, and creatively.

• Proficiency in Scala programming and functional programming principles.
  • Strong SQL skills, including query optimization and database design.
  • Hands-on experience with Hadoop ecosystem tools (HDFS, Hive, YARN, MapReduce).
  • Familiarity with other big data tools like Spark, Kafka, or Flink is a plus.
• Problem-Solving:
  • Strong analytical skills with the ability to troubleshoot and resolve complex data issues.
• Communication:
  • Excellent communication skills to effectively collaborate with technical and non-technical stakeholders.
• Experience:
  • 6+ years of experience in data engineering, big data technologies, or a similar role.

Responsibilities:

• To lead and drive the requirements gathering process.
• To lead and manage a small team of developers to deliver the modules to develop web-based application systems.
• Participate in the design and development of web applications based on Ecquaria’s product (J2EE-based).
• Lead and manage the user acceptance testing process.
• Implement, customize, test, document and maintain software applications.
• Ensure that the modules delivered are according to the specifications and are of high quality.

Requirements:

• A Degree/Diploma in Computer Science with at least 3 years' software development experience in Internet technology in Win NT, UNIX or LINUX platform
• Those with leadership experience may be considered for the Project Lead position.
• Technical skills include proven object-oriented programming experience with Java and C++ together with extensive RDBMS through JDBC
• Experience in J2EE, Web Services and XML will be advantageous
• Experience in Elixir reporting solutions will be advantageous
• Very strong in SQL
• Data analysis skill will be an added advantage, although this is not compulsory to have.
• Good interpersonal skills

Toppan Ecquaria is an equal opportunity employer and values diversity within our company. We welcome all interested candidates to apply for this position, however, we regret to inform that only shortlisted candidates will be contacted by us for an interview.

Find us at www.topppanecquaria.com or www.linkedin.com/company/toppan-ecquaria

For more career opportunities, please visit our career site at:- https://toppanecquaria.com/careers/job-openings?utm_source=Jobstreet&utm_medium=Page&utm_campaign=2020

(Please copy & paste the above link onto your browser)

Benefits

1. Attractive Incentives: High incentive benefits to reward your contributions.
2. Career Growth: Opportunities for professional development and career advancement.
3. Comprehensive Training: Structured training programs to equip you for success.
4. Health Benefits: Enjoy medical and dental coverage for your well-being.
5. Work Locations: Near MRT stations at locations such as Bedok Mall, Causeway Point, and more.

Job Description

As a Customer Service Officer, you’ll be the friendly face and voice of the company, ensuring every customer enjoys a seamless and satisfying experience.

Key Responsibilities:

• Attend to customer inquiries via calls or walk-ins with professionalism and warmth.
• Schedule, reschedule, and send reminders for customer appointments.
• Handle invoicing and cashiering duties, including payments and daily settlement tasks.
• Input data, generate reports, and consolidate information for submission.

Requirements

• Basic proficiency in Microsoft Excel.
• Strong interpersonal and communication skills.
• Customer service-oriented, with a team-player mindset and a positive attitude.
• Prior experience in customer service or an aesthetics-related field is preferred.

Additional Information

• Locations: Bedok Mall, Causeway Point, Century Square, Funan, JCube (Jurong East), Nex, Northway Point.
• Working Hours: Retail hours (shifts) with a 5-day work week.
• Demographics: Preferably with a background in aesthetics.

You will provide quality and personalized one-stop information service for the Hospital. This includes handling general enquiries and managing outpatient appointments through phone, email, web chat, as well as other online platforms.

Requirements:

· GCE ‘N’ Level / GCE ‘O’ Level with at least 1 year of relevant experience or NITEC in Service Skills preferably

· Experience in call centre, customer service or healthcare industry will be advantageous

· Excellent team player with strong interpersonal and communication skills

· Customer-oriented and highly adaptable in a dynamic and fast-paced environment

· Proficient in Microsoft Office applications

· Able to commit to rotating shifts, including weekends & public holidays

Job Responsibilities:

• Assist Project Manager in all on-site technical/ engineering matters and authority submissions.
• Prepare submission of shop drawing / Materials / MOS/ Monthly Progress Claims and PM Reports.
• Lead in Site Coordination and execution relating to the construction project.
• Planning of micro scheduling with other trades/disciplines against Master program
• To update structural/architectural/M&E progress with scheduling tools.
• Supervise and monitor projects are carried out in accordance with the company’s operating procedures, quality standards & contractual specifications.
• Ensuring supervisors & foremen meet clients’ regulatory work requirements.
• To check and ensure compliance with TOP checklist
• Responsible for all inspection activities being carried out.
• Ensuring environmental, safety, and health practices are carried out at all times.

Requirements:

• Degree in Civil or Structural Engineering recognized by PE Board/ BCA
• 4-5 years experience in Building Engineering projects
• Experience with Precast/PPVC/MET projects will be a plus
• Proficient in MS Office, AutoCAD, and BIM
• Organized, meticulous with positive work attitude
• Able to work independently and a team player
• Good analytical, supervision, and communication skills
• Completed QM project and a registered Core-trade Foremen/ Supervisor would be an added advantage

Your main responsibilities include:

• Develop and maintain product datasheet testing and characterization test programs for NAND and NOR components
• Working with product reliability engineers to define test flows for individual products
• Provide support to operation team to ensure seamless execution for generated test flow on the tester with live product
• Perform electrical failure analysis for failure validation and characterization

You are encouraged to apply if you can demonstrate some of the qualities listed below:

• Master's or Bachelor's degree in Engineering field. Microelectronic/Electrical/Computer Engineering fields are preferred.
• Positive attitude and self-motivation towards learning and development.
• Good analytical mindset and structured personality.
• Good written and verbal communication skills.
• Hands on experience with C++/Python and Object-Oriented Programming is a plus
• Understanding Automated Test Equipment and flash memory is a plus.
• Fresh graduates are welcome to apply.

Working location:

• 990 Bendemeer Road, Singapore 339942

Responsibilities:

- Assess Die Overkilling In Line and Optimization of criteria

• Define Sampling Criteria for Yield Enhancement (YE) Wafer – Initial is to align with RPM lot
• Define and Create YE In Line DL2 & MRDA Flow: Full scan with tighter criteria (higher magnification) with non-die-kill
• Create Deviation flow to Route to YE Flow
• Define and Create YE Probe Flow: Full data logging and Test-to-end to capture as much data as possible
• Data Analysis:
• Correlation of MRDA (Metro Real-time defect analysis) Defect to Probe to identify in line failure mode causing probe fail and failure analysis

- Manage Risk of deviation

- Provide organizational leadership to build functional strategies & processes, and collaborate with partners to deliver strategic solutions

• Establish organizational roadmaps and strategies. Apply extensive knowledge and tenacity to carry out strategies.
• Collaborate with peers to construct global solutions.
• Ensure conflict resolution and assist with identifying escalation paths.
• Align internal strategies and communicate line of sight to corporate strategic objectives.
• Establish and communicate department capabilities to ensure partner expectations are aligned.
• Manage conflict and build effective relationships with internal and external partners.
• Initiate and sustain effective communication with internal and external partners.
• Provide advice to senior and executive management on strategic decisions
• Establishes and manages budget/finances for the team

- Ensure a Safe, Compliant, and Ethical Work Environment

• Maintain knowledge of and apply company safety, labor, and ethics policies.
• Communicate requirements and expectations to leaders and external partners.
• Ensure execution of mandatory training for organization.
• Identify and resolve and / or report potential safety, security, and labor issues.

Requirements

• Bachelors, Masters or PhD in Electrical Engineering, Materials Science, Chemical Engineering, or related field
• At least 4 years of experience in Semiconductor Manufacturing and on a leadership capacity, with focus on Advance Packaging technologies and High Bandwidth Memory (HBM) integration, in yield enhancement
• Experience in PWF (Post Wafer Fabrication), Backend engineering process, assembly package technology development and technical knowledge with die and wafer level process technology with understanding of Micron’s silicon and how it interacts at a package level through CPI (Chip Package Interaction), in yield enhancement
• Strong leadership and vision and must be able to comfortably work across organizational boundaries and geographies.
• Demonstrated ability to influence executives, senior leaders and partners on strategic decisions across multiple functions and geographies.
• Ability to effectively collaborate with multi-functional organizations to understand needs and translate them into actionable plans, deliverables, and resource requirements.
• Demonstrated ability to drive and implement a wide range of global initiatives with global teams.
• Ability to be guided by business objectives and determine best methods for delivering results.
• Organized, meticulous, and strong focus on results.
• Demonstrated ability to inspire teamwork and to effectively lead others.
• Proven facilitation skills including the ability to influence others, build consensus, and resolve conflict.
• Demonstrated track record in baseline performance improvement, business process creation, process simulation techniques, data interpretation skills and proficiency in statistical analysis/method.
• Excellent analytical skills and organizational competency
• With good oral and written English communication skill

Keen on the role? Apply now!

As a Package Design Engineer within the Package Development and Engineering (PDE) organization in Micron Technology, you will provide package definition and designs for advanced semiconductor devices. You will be working with a multi-functional team across several geographies to create package design databases such as package stack-up, simulation, route-study, substrate/lead frame layout, wire bond diagrams, and other design documentation. You will be ensure the completion of design activities within the project schedule and ensure that design outputs are within Assembly and vendor capability.

Responsibilities will include, but are not limited to:

• Conduct feasibility studies for various package options and assess designs for manufacturability and reliability.
• Work closely with multi-functional team to address packaging design challenge in the area of layout, electrical, thermal, mechanical, assembly and reliability.
• Interact with PDE assembly team and external assembly subcontractor partners to recommend package solutions to meet customer and/or market requirements
• Generate and update assembly documents in database. Provide drafting and drawing support for package drawings, interposer drawings, and manufacturing drawings.
• Support package and DFMEA reviews with assembly engineering and subcon teams.
• Support package technology development, including material selection, process development, DOEs, and related activities
• Support package technology development, including material selection, process development, DOEs (Design of Experiments), and related activities.
• Track and drive program milestones to ensure timely development execution.
• Provide design support for thermal/mechanical/electrical simulation analysis.
• Support and contribute to the Global Design, Simulation and Substrate (GDSS) team on continuous improvement efforts such as:Global design alignment activities
  Continuous improvement efforts
  Package design rules
  Package roadmaps
  Competitive Analysis review

Requirements:

• Master (preferred) or Bachelor of Science degree in Electrical Engineering or Mechanical Engineering with a minimum of 5 years of experience in semiconductor packaging industry OR PhD graduates in Electrical Engineering
• Candidates must possess a strong design knowledge of high-density (Wirebond + Flip-Chip) packaging architectures, die stack-up, packaging layout optimization.
• Excellent communication skills, both oral and written in English.
• Excellent problem solving and analytic skills.
• Experience with Cadence SIP, APD and AutoCAD software tools is preferred.
• Good understanding of Silicon IP, floorplan and Signal/Power Integrity is a plus.
• Ability to work independently, prioritize and manage numerous projects with minimum supervision.
• A global perspective and the ability to work in a multicultural environment.

Performs semiconductor design engineering assignments including engineering and designing packaging stack-up, layout checking, documenting specifications, modifying and evaluating packaging risk in the areas of electrical, thermal, mechanical and reliability. Reviews package design requirements, define the package stack-up and conduct final design review. Typically responsible for projects, or portions of projects, to design, fabricate, modify, and evaluate semiconductor Packaging.