Job Responsibilities:Design and develop software/GUI for web and mobile application
Implement web, desktop and mobile application
Design, develop, test, integrate revise, delivery and deployment of software
Translate customers’ requirements into software design
Software design development, testing and troubleshooting of the solutions
Provide technical expertise and solutions to meet customers requirement and submit proposal
Collaborate with product management, engineering to define and implement innovative solutions for product directions, visuals and experience
Develop, define and refine UI/UX best practices for the desktop web and mobile applications
Ensure technical feasibility of UI/UX designs
Optimize application for maximum speed and scalability
Deliver project within schedules and deadlines
Assist in project execution and operations
Manage and maintain office IoT asset
Hardware configuration and set up
On-site software support and server maintenance
Remote software assistance and support
Demonstrate software application

☑ Basic $ 2800 - $3300 + Transport Allowances + OT Pay + Standby Allow + AWS + Variable Bonus !!

☑ 5 Days, Flexi Hours - Required to standby once a month

☑ Location: Island-wide (Parking & ERP Fully Claimable)

☑ MNC - Medical Device & Equipment Manufacturer

☑ Good Benefits & Career Prospect

Job Responsibilities:

• Install, maintain and troubleshoot medical angiography systems equipment at customer sites.
• Perform routine inspections and CM/PM maintenance to ensure equipment reliability.
• Collaborate with engineering teams to relay customer feedback and contribute to product improvement.
• Deliver technical training to clients and internal staff.
• Maintain accurate documentation for FSN/FMI/FSCA reporting on assigned products.
• Develop a higher level of troubleshooting and analytical skills.

Job Requirement:

• Higher NITEC Diploma / Degree in Biomedical, EEE or Mechatronic Engineering.
• OR 1 - 3 years of strong hands-on field servicing skills in medical device are highly advantageous

Interested applicants are welcome to apply or send updated resume to [email protected]

Only shortlisted candidate will be notified

Kam Soo Leng, Yvette

Registration: R22107492

Summary

Candidates will work in a team of engineers to develop new products for Cloud and Data Center Market. This will involve close collaboration with some of the best circuit designers in the industry armed with the tools, knowledge, and technologies of the leader in power management. The job requires basic understanding on power electronics and laboratory skills. Additional job responsibilities include writing circuit documentation and application notes as well as product promotion in front of customers and business development.

Key Responsibilities:

· Product Development

o Verify the power solution through behavioral simulations

o Guide design of evaluation boards for internal silicon verification and customer evaluation

o Experimental verification of products in development to identify problems and limitations

· Product Support

o Generation and validate reference designs for system verification and customer applications

o Develop design collaterals to assist customers with designs, such as datasheets, evaluation kit manuals application notes, layout guidelines and simulation models

o Verification and testing of evaluation kits, and generation of evaluation reports for customers

o Support Troubleshooting of difficult or unusual technical problems

Education & Experience

Minimum BSEE + 2 years of experience; Preferred MSEE (or equivalent) + 2 years of experience

Qualifications

• Strong knowledge of electrical engineering fundamentals
• Strong analytical skills
• Clear and concise communication skills
• Digital and software design skills
• Power Electronics Knowledge – Operation and Control of DC-DC converters
• Understanding of circuit simulation and/or software development tools and techniques
• Hands-on experience with lab equipment (i.e. power supplies, oscilloscope, electronic-load, DAQ)
• Experience in debugging circuits
• Ability to self-manage and meet deadlines

Can work both independently and with a cross-functional team

Essential Functions (Responsibilities):

- Develop and grow key accounts in the Oil & Gas sector, Pharmaceutical and other industrial sectors contribute company growth objectives in Singapore.

- Provide technical sales support and consultation to clients for the sale of electrical products in order to develop business opportunities and penetrate clients.

- Perform all aspects of selling to maintain and develop new or existing customers including: take-offs, project quotations, closing orders, preparation of submittals and resolving customer problems.

- Meet or exceed budgeted sales and gross margin targets with assigned accounts.

- Focus on identifying specific technical requirements of customers while simultaneously collecting commercial and competitive information associated with each account

- Cultivate effective long-term relationships at all levels of the customer organization.

- Attain expert knowledge of products, electrical goods market and competition.

Qualifications/Requirements:

- Formal Electrical Engineering qualification (Diploma/Certification)

- Strong technical and commercial background.

- Minimum 1 to 2 years of proven sales experience to industrial customers

- Electrical product knowledge

- Very strong consultative selling, interpersonal, and negotiation skills

- Resourceful and results-oriented.

-Highly motivated, self-confident, self-starting work ethic with good networking abilities

- Team player who works well in global teams

- Good command of spoken/written English

- Have own car

** Package up to 55K a year **

Key Responsibilities

• Perform on-site installation and commissioning, servicing maintenance, and troubleshooting of equipment and machine at site.
• Provide on-site preventive maintenance service on machine/equipment according to schedule.
• Required to work OT or during weekend / public holidays but not very often.
• Any other duties or tasks when assigned.

APPLY NOW!!!

• Min Nitec in Electrical or Mechatronics Engineering, or equivalent.
• Min 1 year of hand-on-experience in industrial automation or F & B equipment will be an added advantage.
• Good working attitude and willingness to learn new machine or equipment

Durapower Group take pride as a Singapore enterprise specialises in the design, manufacturing, and integration of lithium battery systems for automotive and energy storage systems

This role will develop BMS software and directly reporting to Engineering Manager. The person must be able to speak English and Mandarin as he or she will also collaborate closely with the Engineering staff in China.

Job Description: Senior/BMS Software Development Engineer

Roles & Responsibilities:

· Requirements analysis, develop software requirements, software specification and design, system level and software level test cases, unit test and software component testing.

· Software engineer to develop and debug software or modify existing software algorithm / concept in model-based development (Matlab Simulink) or partially C programming in V-Model

· Experience with software development in electric powertrain or energy storage for BMS, e.g. cell balancing and monitoring, charging and discharging profile, SOC, SOH state estimation, overvoltage/overcurrent protection, thermal runaway detection, intelligent algorithm to reduce aging, etc.

· Handling embedded software test environments for example, SIL, MIL and Hardware-In-The-Loop (HiL), PowerHiL, dSpace, LabCar or similar system, including calibration and test process and toolchain

· Experience Automotive Software 3-layer architecture and collaborate with embedded MCU

· Perform static code analysis using standard tools for all software codes to ensure MISRA compliance

· Configure software flashing and flash technology

· Integration of complete software components, troubleshoot and deliver software releases based on project milestone.

Requirements:

· Bachelor Degree in Electrical & Electronics Engineering, Software, Computer Engineering, Computer Science, Information Technology or all equivalent degree are accepted

· Up to 5 years of working experience is required.

· Working Experience in automotive industry, software industry, electronic industry, industrial engineering with software experience or equivalent

· Experience with embedded microcontroller (e.g. Infineon AURIX or others)

· Experience with development tools e.g. HIL, MATLAB SIMULINK, Calibration Tools, Software Debugging Tools

· Alternative experience in Software in E-Motor control (Inverter), DC-DC/OBC or any other ECU software

· AUTOSAR experience is bonus

· Bilingual in English and Mandarin, as the role requires close collaboration with our engineering team in China.

· Can-do attitude, with strong design thinking

· Experience working with technical

· Work location based in SG, willing to travel on demand basis.

Role & Responsibilty

• Responsible for quantity take-offs and Cost Control functions for projects.
• Subcontracts management.
• Supervisor and Plan for Daily work schedule and progress for requirement for targeted completion.
• Tracking of Subcontractors/ Suppliers obligations required as per agreement.
• Administering variations to subcontractors and suppliers.
• Preparation of progress certificates for subcontractors and suppliers.
• Assist in the preparation of the monthly cost reporting and forecasting.
• Identification and pricing of variations to the Contract.
• Assist in preparation of monthly commercial report.
• Maintaining registers of variations, extension of time claims.
• Liaising effectively with other Technician, engineers and supervisors to ensure all relevant information in relation to variations. and extension of time claims is captured.
• Any other duties as may be required by the Company.

Requirement

• Diploma / Degree
• Minimum 2 to 5 years experience as a Engineer
• Passionate about Project values of safety & care, being honesty & integrity, customer focus, working together and performance excellence.

• Liaise with Clients, Consultants, and Authorities for management of the project
• Must have the experience in Diaphragm wall and pilling
• Perform Civil/Structure engineering design works
• Responsible for on-site technical / engineering / administrative matters
• Involve in project planning, implementation, and close monitoring of projects
• Determine best materials and methods with Professional Engineers
• Liaise with Architects on design and safety of the structure
• Analysis of structural components with engineering software
• Prepare drawings, specifications, and computer models of the structure
• Ad-hoc duties as assigned by the Senior Engineer

Requirements:

• Candidate must possess at least Degree in Civil/Structural Engineering
• Minimum 10 years of LTA experience required
• Required Skill(s): Good communication and interpersonal skills, ability to liaise with all levels of people
• Relevant experience in the design of Buildings, Civil and Infrastructure works
• Preferably with project site co-ordination experience
• Knowledge of engineering software and MS Office

• Act as a client representative mechanical design engineer for JTC and various ministries for the development of building and infrastructure projects
• Formulating the project briefs for consultant tender
• Managing the consultants and reviewing their design drawings, technical calculations and specification, in the interest of the clients, from design until the project completion.
• Develop innovative solutions to integrate building and facility layout to optimize land resource.
• work with our partners and academia on technologies research and deployment as well as customers to provide solutions to improve production layout efficiency.
• plan and conceptualise new and advanced engineering related technologies areas in our building facilities.
• Also draft specifications, call tender, review and recommend tender awards as well as plan and implement annual budget and workplans.

Requirements

• Background in Mechanical Engineering, with at least 5 years of relevant working experience in consultancy & design or construction companies. Being a Professional Engineer will be an added advantage

Support the project team in planning, scheduling and coordinating the civil & structural works (site).

· Manage on-site construction works and documentation

· Assist in overseeing engineering deliverable and multi-disciplinary works in order to meet project quality requirements.

· Ensure that on-site construction works are carried out accordingly to local regulations and requirements and meet project quality requirements.

· Assist in preparing civil and structural designs and contract specifications

· Coordinate work with other disciplines such as civil, architectural, mechanical and electrical.

· Prepare and compile related report

· Planning physical works on site through scheduling works and agreed timelines, sequencing of construction works

· Any other ad-hoc duties assigned

Requirements:

· Minimum 7 years’ civil site experience

· Experience in LTA project will be an added advantage

· Able to work under fast paced environment

· Degree in Civil Engineering

Control and monitor work progress and ensure work quality.

· Responsible for working closely with project team and resolving technical issue

· Responsible for coordination and liaise with contractors, suppliers, and consultants

· Prepare and compile related report

· Attend site meetings

· Any other ad-hoc duties assigned

Requirements:

· Engineering or Civil / Structural Engineering Diploma / Equivalent

· Minimum 5 years’ relevant experience

· Carry out project planning, scheduling, cost control

Job Description

. Provide hands-on site installation, validation,commissioning and maintenance of electrical equipment

(AC UPS,DC UPS , Batteries, Switchgear and BMS)

. Provide on-site training to the customers

. Develop Service technical documentation

. Create and maintain service information in the company database

. Timely and professionally handle field service calls and issues arising from the field service visits

. Timely complete and submit all required paperwork

. Communicate with the customers to ensure satisfaction and implement any necessary corrective actions

Job Requirements

. Minimum ITE/Diploma or Degree in Engineering ( E&E,Electrical Power)

. Proficient in AutoCAD (Electrical Drawing) and programming will be an advantage

. Proficient in Microsoft Office

. Fresh graduates are welcome to apply ( on the job training will be provided)

- Oversee operations and cleanliness on ground

- Perform general cleaning to maintain cleanliness

- Manage customer complaints in professional manner

- Manage manpower deployment

- Conduct site inspections to ensure compliance with health and safety standards

- Prepare operations reports and other administrative duties

- Any other related duties assigned by manager

• Lead and manage the mechanical and electrical (M&E) design and engineering activities.
• Oversee the planning, design, and implementation of M&E systems for construction projects.
• Collaborate with architects, consultants, and contractors to ensure integration and coordination of M&E systems with overall project design.
• Review and analyze project specifications, drawings, and technical documents.
• Prepare and present technical proposals and reports to clients and stakeholders.
• Ensure compliance with regulatory requirements and industry standards in the design and construction of M&E systems.
• Manage and monitor project progress, budget, and quality of deliverables.
• Must be able to review and do design calculations for approval.

Requirements:

• Bachelor's degree in Mechanical or Electrical Engineering or related field.
• Minimum 5 years of experience as Resident Engineer which at least 3 years shall be in the supervision of works similar in nature to the works in the civil constractors also have minimum 3 years of experience in M&E works.

Responsibilities:

Primary responsibilities include, but are not limited to:

• Able to oversee customer requirement and translate to feasible solution design.
• Install, test and commission network infrastructure according to best practices, but not limited to routers, switches, Wi-Fi, firewalls etc.
• Provide technical support and diagnose problems through onsite or remotely troubleshooting.
• Conduct system acceptance test and update as-built documentations.

Requirements:

• Diploma/ Degree in Information Technology IT/ Telecommunication / Computer Engineering or relevant IT certifications.
• Min 6 year of expertise in implementation / administering, and troubleshooting network and IT infrastructure.
• Hands-on technical experience and/or CCIE/ HCIE certification are advantage.
• Good communications and able to work in fast-paced environment.

About Apeiro Networks:

Apeiro Networks is a premium network infrastructure solutions provider with a strong presence across Asia, specializing in DWDM, Metro Ethernet, and Time & Synchronization solutions. Our comprehensive expertise in hardware and software integration supports high performance, resilient network infrastructures essential for modern connectivity.

We are currently looking for a dedicated Technical Engineer based in Singapore to join our team. This critical role involves providing continuous maintenance and field support, ensuring that our clients experience uninterrupted service. The ideal candidate will be comfortable with rotating shifts and on call work, with the skills and commitment required to keep networks running smoothly at all times.

Position Summary

The Technical Engineer will be responsible for providing around the clock maintenance and onsite support for Apeiro’s network infrastructure solutions. This role involves hands on troubleshooting, scheduled maintenance, and emergency repairs for DWDM, Metro Ethernet, and Time & Synchronization equipment. Working on a rotational shift schedule, you’ll ensure our clients’ systems stay operational, while resolving issues swiftly to maintain the highest service standards.

Key Responsibilities:

24x7 Network Monitoring and Support:

• Provide continuous monitoring of network systems, responding to incidents and outages as they arise.
• Perform immediate troubleshooting and repairs to minimize downtime, escalating issues to specialized teams if necessary.
• Work on a rotational shift basis, including night shifts and weekends, to ensure constant support availability.

Field Installation and Maintenance:

• Install, configure, and maintain DWDM, Metro Ethernet, and Time & Synchronization equipment at client locations, ensuring optimal performance and alignment with technical specifications.
• Conduct scheduled preventive maintenance to keep systems functioning efficiently and to prevent service disruptions.
• Respond to emergency field service requests, arriving promptly onsite to perform diagnostics and repairs.

Client Communication and Support:

• Maintain clear and proactive communication with clients, keeping them informed of maintenance activities, system status, and issue resolution.
• Conduct basic training for clients on system use and maintenance, as required.

Documentation and Reporting:

• Maintain detailed logs of maintenance activities, incidents, and resolutions to support continuous improvement.
• Prepare regular reports on system performance, service incidents, and maintenance activities for internal review and client updates.

Qualifications & Skills Required:

• Diploma in Telecommunications, Electrical Engineering, Computer Science, or a related field.
• Minimum of 3 years of experience in maintenance or field engineering, with a focus on network infrastructure, DWDM, Metro Ethernet, or Time & Synchronization.
• Strong knowledge of network protocols, diagnostic tools, and maintenance techniques specific to DWDM and Ethernet networks.
• Proven ability to diagnose and resolve network issues effectively and efficiently in high pressure situations.
• Willingness to work a rotating 24x7 shift schedule, including nights, weekends, and holidays.
• Effective communicator, with the ability to explain technical issues clearly to clients and collaborate with internal teams.
• Highly organized and detail oriented, with a commitment to maintaining accurate and thorough documentation.
• Proficiency in English is required; knowledge of additional regional languages is advantageous.
• Ability to travel locally for onsite support as needed.
• Fresh graduates are welcome to apply. Training will be provided.

What We Offer:

• Competitive salary and shift allowances
• Comprehensive health and wellness benefits
• Ongoing training and professional development opportunities
• A collaborative and supportive work environment with a commitment to excellence

Application Process:

To apply, please submit your resume and a cover letter detailing your relevant experience and availability to [email protected]. Include "Technical Engineer Singapore" in the subject line.

Join Apeiro Networks:

If you’re ready for a challenging, rewarding role that ensures the seamless operation of critical network infrastructure, we’d love to meet you. Join Apeiro Networks, where your expertise will make a real impact in Asia’s telecommunications landscape.

• Lead a team of line leaders and operators to meet daily production output, quality, productivity and yield.

• Conduct daily pass-down meetings and escalate line issues if any

• Oversee manpower/overtime and consumables planning

• Ensure manufacturing and safety procedures are being followed

• Conduct training/coaching to leaders & operators to improve performance

• Implement ideas and improvement activities to prevent human errors

• Ensure good discipline and housekeeping in the line

• Coordinate with other departments to support projects, evaluations and preventive maintenance activities in the fab

• At least 5 years working experience

· Must be able to work night shift and split shift

· Must be able to work extra hours or weekend if needed

Job Overview:

Responsible for managing the overall direction, coordination, implementation, execution, control and completion of structured cabling projects. Additionally, ensure projects achieve time, scope, budget, quality, safety and customer satisfaction requirements. Oversee projects from start to finish.

Responsibilities:

• Monitor the day-to-day activities in the field, managing the flow of information, and reporting and tracking issues arising from progress, quality and safety
• Assist in completing the handover plan, ensuring documentation is completed and expectations are met on time and with quality
• Identify issues proactively and work with the team to resolve effectively
• Maintain and develop strong relationship with customers with direct interaction with focus on improving customers’ perception of service, quality, on time delivery, responsiveness, and problem solving.
• Travel to various job sites required.
• Ability to work overtime and weekends when required.
• Effectively manage multiple projects.

Job Requirement:

• Understand technical and construction documents.
• Experience in the construction or technology industries is required

· Proficient with Microsoft Office (Word, Excel, Outlook), Microsoft Project and Adobe Acrobat.

• Excellent communicator verbally and in writing
• Demonstrated management and leadership experience.
• Must be able to perform multiple tasks within deadlines.
• Understanding of general contractor procedures.

Responsibilities:

• To manage & oversee overall F&B operation & inventories
• To upkeep cafe housekeeping, general cleanliness and hygiene
• To assist in taking care of cafe cats including grooming, feeding & cleaning
• To assist in customer service & orientation
• To assist in preparing, serving of food/beverages & cashiering
• Other ad-hoc duties required

Requirements:

• Comfortable with cats & able to recognize cat’s behaviour & handling practices
• Committed, responsible & well-spoken individual
• Proactive & detail-oriented
• Service-oriented, self-motivated & a good team player
• Must be comfortable meeting & interacting with people
• Willing to learn & pick up new skills for self-development
• Able to work 6 days weekly including weekends & public holidays
• Candidates to have at least 1 year of working experiences in vet clinics, animal shelters, cats or F&B related environment
• Food Hygiene Cert or barista/coffee skills is a bonus

1. JOB DESCRIPTION

Process Invoicing, delivery order, proforma invoice, packing list and other related documentations

Data entry on job related information into System

Coordinate with planners and customers on daily basis for schedules and shipment- Logistic/courier documentations & arrangement.

Update customer forecast and generate report-

Other responsibilities as requested by superior or top management.

☑ MNC - Medical Device & Equipment Manufacturer

☑ Basic $ 2800 - $4000 + Transport Allowances $350 - $1050 + OT + Standby Allowance + Bonus

☑ 5 Days, Flexi Hours - Required to standby once a month

☑ Location: Island-wide (Parking & ERP Fully Claimable)

☑ Good Benefits & Career Prospect

Responsibilities:

• Install, maintain, and troubleshoot medical imaging equipment.
• Prepare service reports, process orders, and maintain accurate records.
• Build strong relationships with clients and ensure their satisfaction.
• Develop technical skills and stay updated on industry advancements.
• Work independently, collaborate with team members, and maintain a positive attitude.

Requirements:

• Strong foundation in electrical, electronic, computer hardware, and networking.
• 1-3 years of experience in the medical device industry or engineering field preferred.
• Open to both experienced professionals and entry-level.
• Willingness to work night shifts and travel required.

Remuneration will be commensurate with experience and qualifications.

Only shortlisted candidate will be notified.

Yang Hui Shan (Sherri)

EA Reg No.: R22106683

Job Description:

• Greeting guests upon arrival and making them feel welcomed.
• Administering check-ins and check-outs.
• Providing front desk services to guests.
• Assigning rooms and taking care of administrative duties.

Working Arrangements:

Working hour : 8 Hours per shift

Shifts : 3 shifts (A – 7am to 3pm), (B – 3pm to 11pm), (C – 11pm to 7am)

Working Location: Changi Airport

• Contact and Communicate with Customer (Local and Region)
• Liason with customer on inquiry and Order
• Provide Quotation and offer to Customer
• Work closely with Sales and Engineering colleagues
• Order Processing, Order Confirmation
• Follow up with Customer on Delivery and Shipment, Invoicing and
• Delivery Order
• Assist in Exhibition, Road Show, Sales Event or Marketing activities
• Contact and Communicate with Supplier
• issue Odder to Supplier (Local and Oversea)
• Order and Delivery Tracking
• Shipping and Receiving. Shipment Booking and arrangement,
• Incoming stock check Incoming stock storage, maintain inventory record and re-ordering of stock
• Document filing, preparation, data entry, product label printing, office upkeep
• Simple Book Keeping
• Task Orientated and Self Motivated

Correspondence: Through Email [email protected]

Responsibilities:

• Provide friendly, personalized assistance to customers in-store, by phone, or through email, ensuring a positive shopping experience.
• Manage point-of-sale transactions, including POS, NETS, and credit card processing.
• Assist with sales and operational tasks to maintain smooth daily store functions.
• Keep shelves stocked and organized, and contribute to store housekeeping to maintain a welcoming environment.
• Support the Store In-Charge with any additional tasks as required.

Requirements:

• Minimum GCE ‘N’ or ‘O’ Level qualification.
• Previous retail experience, especially in the healthcare sector, is beneficial.
• Willingness to work retail hours, including weekends and public holidays.
• Conversational ability in both English and Mandarin is a plus.
• Strong customer service focus, a friendly attitude, and reliability.
• Familiarity with Microsoft Office applications is advantageous.

Interested candidates who wish to apply for the advertised position, please click on the apply button

EA License No: 96C4864

Reg. No.: R2094940

For candidate who applied for the advertised position is deemed to have consented to us that we may collect, use or disclose your personal information for purpose in connection with the services provided by us.

Responsibilities:

 1. Involved in SDLC processes like requirement

analysis, designing, coding , testing ,releasing, and providing

maintenance

 2. Fixed point auto code generation for production purposes of the system-level testing

 3. Experienced in writing and analyzing systems requirement

documents and usee test cases , preparing test logs and summary

reports

 4. Checking daily WIP calculations and updating the monthly machine status

 5. Identified and addressed technical issues in a timely and efficient manner

 6. Perform wire bond sub-module assembly, set-up, and calibration to meet the

in-house specifications

 7. Conduct testing strength of bonded connections, using testing equipment reports

 8. Designed, implemented, and tested modular components for printer

firmware

 9. Discovered, investigated, and found solutions for problems in OS and

compiler

10. Development on Linux Platform with Embedded C user side of RTOS

11. Assisted QA in developing meaningful testcases.

Excellent numeracy and analytical skills

12.In-depth scientific knowledge

13.Good problem-solving skills

14.Good communication and interpersonal skills

15.Good technical skills

16.Able to work and be stationed overseas

17.Flexible working hours.

Qualifications:

• Master’s degree in a related field
• Proficient in C++ and other object-oriented programming languages
• Analytical and logical thinking
• Strong problem-solving skills
• Ability to work without supervision

Technical skills:

•  Advanced Microcontrollers
•  Analog Circuits
•  Embedded Systems(Embedded C,Keil IDE,Proteus)