As the Research Engineer (Equipment/Operations), you are directly involved in tool installation activities for semiconductor process tools. You would need to work proactively to coordinate with the contractor on the ground for the execution and take corrective and preventive actions of lessons learned, due diligently to prevent reoccurrence. You are responsible for performing utilities turn-on after installation is completed. You must perform the activities per ASTAR site procedure and safety policies to ensure all tool-install-related activities are completed, meeting safety, quality, schedule and budget requirements. You will also be required to perform other activities such as operations for the different semiconductor modules (Diffusion, Litho, Dry/Wet Etch, Thin Film, Implant, etc).

Responsibilities:

• Coordinate with all tool-install base contractors to execute equipment hookup for new tools, to meet the high-quality standards, dynamic schedule, and forecasted budget.
• Coordinate with the Project owner (NGTC/APM) to facilitate utility release as per the planned schedule and update tool release status timely
• Follow all safety and environmental procedures to ensure compliance with EHS-related regulations, risk assessment, safe work procedures, and permit-to-work system.
• Play an active role in safety, actively participating in safety discussions and safe work practices.
• Establish regular area walks to identify opportunities for improved safety, cleanliness, housekeeping and efficiency
• Establish regular, working interaction with peers as well as vendors in tool installation & facilitation, communicating clearly and respectfully all relevant information.
• Keep the reporting officer informed regarding the progress of assigned work and any abnormalities observed in your area.
• Demonstrate ability to understand drawing and highlighting discrepancies
• Follow area-specific procedures and documentation
• Prioritize work tasks to meet schedule and expectations, minimum guidance
• Perform tool tool-relativities and cleanroom systems troubleshooting during the hookup phase
• To perform equipment trouble-shooting of the equipments in NGTC when the need arises
• To perform utility-on after installation completion and to work closely with LCAM for complete closure
• To perform tests balancing of exhaust for new tools whenever necessary
• To perform measures for tool consumption during the hookup phase and to work closely with LCAM
• Use methods to organize, calculate, and display data accurately for utility and flowrate measurement
• Perform site activities in accordance to the Discipline

Requirements:

• Degree/Diploma in Mechanical/Electrical/Chemical engineering or equivalent with at least 5 years of relevant experience
• Semiconductor experience (Equipment & Process)
• Facilities field or Wafer Fab Manufacturing equipment background will be an advantage.
• AutoCAD

The above eligibility criteria are not exhaustive. A*STAR may include additional selection criteria based on its prevailing recruitment policies. These policies may be amended from time to time without notice. We regret that only shortlisted candidates will be notified.

• You will work include face-to-face and remote selling to both new and existing customers including selling directly to the end consumer/business purchaser or indirectly through various sales channels.
• You will assess customer needs and suggesting appropriate products, services, and/or solutions.
• You will be developing, delivering sales bids, presentations, proposals and conducting product demonstrations.
• You will identify, contact prospective customers, building relationships to generate future sales and repeat business Incumbents matching to this specialization are compensated based on achievement of sales targets.
• You will manage projects / processes, working independently with limited supervision, coach and review the work of lower level professionals and problems faced are difficult and sometimes complex.
• Living Hitachi energy's core values of safety and integrity, which means taking responsibility for your own actions while caring for your colleagues and the business.

Requirement

• Minimum Degree in Engineering with 3-5 years experience. Entry level candidates are welcome to apply.
• Ability to work collaboratively with employees within department and across functions.
• Possesses excellent interpersonal, communication, problem-solving skills and capable of working effectively under own

Are you a software engineer passionate about building high-quality code with a real-world impact? Join a world-class team that uses NASA satellite data to prevent greenhouse gas emissions and transboundary smoke haze. We are a small, collaborative group in which you will be exposed to and learn from engineers and scientists from MIT, Stanford, NTU, and NASA while building a dynamic geospatial application for nature restoration and carbon projects.

Responsibilities

1. Lead the design, implementation and testing of the analytical engine for a geospatial web application based on cutting-edge algorithms.
2. Interact with a full-stack developer, users and scientists to gather requirements and iteratively improve capabilities and efficiency.
3. Maintain quality by participating in code review and setting up and maintaining test frameworks.

Skills and Qualifications

1. Bachelor’s degree in computer science, information technology, or a related field.
2. Work experience in developing computational code as evidenced by one or more applications or prototypes.
3. Familiarity with back-end development using modern platforms.
4. Training in data modeling and SQL and experience with database management systems such as PostgreSQL.
5. Familiarity with version control systems like Git and test- and documentation-driven development.
6. Languages and technologies:Python
   SQL
   Git
   
7. Advantageous:Cython
   C, C++, modern FORTRAN, or Julia
   PostgreSQL
   GDAL, PostGIS, GRASS, QGIS
   Linux packaging and deployment
   Familiarity with physics and linear algebra
   
8. Quality traits we are looking for:Understanding of software development fundamentals
   Organisational skills: setting and achieving short- and medium-term goals

To apply, please visit our website at: https://portal.smart.mit.edu/careers/career-opportunities

Interested applicants are invited to send in their full CV/resume, cover letter and list of three references (to include reference names and contact information). We regret that only shortlisted candidates will be notified.

On behalf of our hiring client who is an Original Equipment Maker (OEM), we are looking for a suitable candidate to join them as Product Design Engineer (Electrical).

Responsibilities:

• Provide technical support to the Project team, Installation on problem verification, report and coordinate with Group on job site issues and technical solutions related to electrical design.
• Involving in design interfacing and parts provision among Group of companies.
• Participate in the resolution of design problems related to Error/Trouble investigation, and formulate corrective & preventive measures.
• Provide engineering support to Marketing and Sales staff for new products.
• Provide Maintenance Works Inquiry/Spare Parts Inquiry/Order Supports.
• Any other ad-hoc matters assigned by the Manager.

Requirement

Degree/Diploma in Electrical Engineering with at least 2-3 years experience in electrical design work.

Proficient in Auto CAD & 3D software is essential

EA license : 22C0971 | EA Registration : R21101298

Location: East

Job Description :

• Manage customer orders from inception to delivery and through the entire order-to-cash cycle
• Liaise with other teams to resolve requests/issues in a timely manner
• Administer return processing & credit/debit price adjustment
• Expedite and track customer orders: answer inquiries ( through e-mail, whatsapp, etc. )
• Take corrective actions to resolve customer issues or order fulfilment inefficiencies
• Ensure compliance to all company and business policies and administer all open sales order and ensure appropriate order flow

Requirements :

• Good working knowledge of Microsoft Office and systems used within Customer Service systems with expertise to assist less experienced colleagues
• Min Diploma in Business Admin / Supply Chain
• Minimum of 1 year previous Customer Service experience in an F&B / FMCG environment including management of complex/challenging customer issues
• Experience of encouraging others to work to KPI’s/SLA’s
• Creative thinking ability with proven problem-solving skills including developing new ideas and making projects

JOB DESCRIPTION

The candidate is expected to contribute to IME in:

1. Electrical test on 12" wafer for IV-CV measurement

2. CSAM operation

3. ESD test

4. Reliability chambers operation

5. Other lab related paper work

JOB REQUIREMENT

1. Bachelor’s Degree or Polytech in EE & EEE background

2. Able do some computer programming

3. Ability to work effectively and independently

4. Ability to communicate and interact with staff and industry personnel successfully

5. Able to do some shift work requirement occasionally

The above eligibility criteria are not exhaustive. A*STAR may include additional selection criteria based on its prevailing recruitment policies. These policies may be amended from time to time without notice. We regret that only shortlisted candidates will be notified.

Job Overview:

The Cloud Computing Pre-sales Engineer is responsible for providing technical support in the pre-sales phase of cloud computing and data center projects. This role involves crafting and implementing delivery solutions, supporting market expansion, and ensuring successful project acceptance. The unique contribution of this position lies in its pivotal role in shaping and advancing the organization's technological capabilities.

Qualifications:

• Education: Bachelor's degree or higher in a computer-related field.
• Work Experience: Minimum three years;
• Industry Experience: Minimum two years;
• Position Experience: Minimum one year.

Requirements:

• Familiarity with cloud computing architecture and experience in planning and designing mainstream cloud platform products.
• Proficiency in at least one mainstream virtualization and cloud product, understanding of open-source cloud computing technologies, and knowledge of mainstream public and private cloud technologies and implementations.
• Familiarity with virtualization products such as VMware vSphere, Citrix XenServer, Windows HyperV, FusionSphere, etc., with experience in planning, designing, and implementing cloud computing and data center products.
• Familiarity with network architecture and design, SDN technology, and expertise in network and security products, including experience in planning, designing, and implementing network security solutions.
• Mastery of cloud platform business data backup and disaster recovery technologies, with hands-on experience in data backup, two-site three-center disaster recovery, and active-active disaster recovery projects.
• Proficiency in technologies such as Docker, Kubernetes, cloud-native, and microservices frameworks.
• Familiarity with storage-related technologies and solutions, including Ceph, SAN, NAS, etc.
• Proficient use of Microsoft Office software with excellent document writing skills.
• Familiarity with cloud computing sales.

Key Responsibilities:

• Conduct research and develop microgrid power management and energy management algorithms.
• Deploy power and energy management applications on microgrid controllers.
• Develop AI/ML/DL solution platforms for various energy management applications.
• Design SLD, sizing, and integration of microgrid DERs, protection circuits, and loads.
• Prepare test cases and conduct microgrid functional, error tests both SIL and on testbeds.
• Emulate microgrids using tools such as Power Factory, Matlab, or Panda Power and integrate with microgrid controller to carry out preliminary SIL tests.

Requirements:

• Bachelor, master’s degree, or Ph.D. in Power Systems, Electrical Engineering or equivalent, with minimum 5 years of experience.
• Experienced in scripting Python, Matlab or equivalent.
• Knowledge of operational principles of microgrids such as on-grid optimization, off-grid optimization, islanding, resynching, and blackstart operations
• AI, ML, DL related experiences in domains such as energy management, predictive analysis, forecasting, and anomaly detection is an added advantage,

• Administer project planning and project execution;
• Ensure all project activities are performed productively and are in accordance to specification and schedule, in the most efficient and cost effective manner;
• Co-ordinate the mobilisation/demobilisation of construction equipment to suit construction schedules;
• Assist with cost control and estimating activities;
• Check and verify subcontractor claims and variations;
• Ensure all company reports and documentation are completed accurately and on time;
• Continually seek improvements in the work systems;
• Maintain close liaison and communication with field operations team;
• Stay focused on the needs of the client and strive to exceed their expectations;
• Perform any other related duties as and when assigned by Manager.

Requirements:-

• Diploma / Degree in Mechanical Engineer or related engineering field;
• Min. 3 years of related field experience;
• Knowledge on Autocad will be advantageous;
• Dynamic and good team player;
• Good planning, execution and presentation skills;
• Able to travel overseas as and when required.

Interested applicants, please send us your detailed resume stating current and expected remuneration, reasons for leaving previous employment and availability to commence work.

We regret that only shortlisted candidates will be notified.

Work Arrangement

• Work Hours: Wednesday - Saturday, shift work available and to be discussed

• Work Hours: Sunday, full shift required (8.30am - 6.30pm)

• Location: Oasis Terraces

• Commitment: 3 months and above

• Hourly Rate: $12 - $15 / hr

Job Description

• Handle all walk-ins, phone and online enquiries in a professional and customer-oriented manner

• Handle registration, student movements (transfers / withdrawals) and payment collection in accordance with the centre's SOPs

• Actively promote and upsell programmes to both prospective and existing customers

• Attend to customers' needs and enquiries in a prompt and service-oriented manner

• Maintain an updated record of customer interactions, including inquiries, feedback and complaints

• Escalate unresolved customers' feedbacks and grievances promptly to the Centre Manager or Management

• Provide support and assistance to teachers and students whenever required

• Maintain a strong communication link between teachers and parents to ensure a seamless client experience

• Assist in other adhoc duties as assigned

Job Requirements

• Strong proficiency in spoken and written English

• Possess emotional maturity and passion for customer service

• Good team player with ability to work with minimal supervision

• Able to work shift hours and at least one weekend (Sundays full shift)

We are seeking a talented Presales Engineer with a strong background and enthusiasm for robotics to join our team. As a Presales Engineer, you will be a key player in shaping the success of our robotics solutions by actively engaging with potential customers, understanding their needs, and showcasing the capabilities of our products. You will play a pivotal role in driving our mission to redefine the future of smart cities and empower the service workforce through technology by developing proof-of-concept use cases with our business development team.

Duties and responsibilities

• Collaborate with the sales/business development team to understand customer requirements and use cases, and identify how KABAM Robotics solutions can address those needs.
• Conduct product demonstrations and presentations to potential customers, showcasing the features and benefits of our robotics solutions.
• Develop proof-of-concept capabilities through ad-hoc software development and mechanical/electrical design with the help of internal engineering teams.
• Work closely with customers to understand their specific use cases and provide expert guidance on the integration of our robots into their operations.
• Create technical proposals and documentation tailored to customer requirements.
• Develop a deep understanding of KABAM Robotics' products and stay up-to-date with the latest advancements in the field.
• Act as a technical liaison between customers and our internal engineering teams, ensuring a smooth transition from presales to implementation.
• Support the sales team by participating in customer meetings, technical discussions, and addressing customer inquiries.
• Provide feedback to our product development team based on customer needs and market trends.

Qualifications, Skills, Experience

• Background in Computer Science/Electrical Engineering/Mechanical Engineering.
• Strong technical knowledge in their domain and the ability to work with customers.
• Should have at least one of the following:

○ Experience in Python or Javascript or C++. (or)

○ Experience in CAD software such as SolidWorks. (or)

○ Experience in mechatronics design such as working with Arduino or custom PCBs.

• Excellent presentation and communication skills.
• Ability to understand and address customer requirements and translate them into technical solutions.

Plus Qualifications

• Degree with a focus on robotics, mechatronics, or related fields.
• Experience with cloud computing platforms (e.g., AWS, Azure, Google Cloud).
• Familiarity with Docker, Jenkins, and other deployment tools.
• Exposure to backend system design to support robotics applications.
• Previous experience in a presales or technical sales role.
• Participation in robotics-related hackathons or competitions.

Job Types: Full-time, Permanent

Salary: $4,200.00 - $4,600.00 per month

Schedule:

• Monday to Friday

Work Location: In person

Responsibilities

* Direct report to the Chief Engineer

* Store all the spares properly and maintain record of the spares inventory

* Maintain & update different records of the engine room regularly

* Make sure all the machineries and safety systems are working safely and efficiently

* Responsible for all oil transfer operations carried out oboard including bunkering

Requirement

* Minimum 2 years experience on board chemical tanker vessel