Job Description

a) To report to the Manager or team leader as shown in the organization chart. He/she is responsible for the assigned or related project tasks and responsibilities.

b) The detailed duties and responsibilities include but not limited to the following:

• Study and fully understand the ISO requirements, technical drawings, scope, contractual requirements and sub-contract agreements. Work with the consultants to resolve technical issues prior to construction.
• Submit to superior for feedback and concurrence on short or medium-term programmes and execute the works according to the detailed programme.
• Ensure that the works are carried out according to the approved drawings, quality procedures and EHS requirements. Managing the works with excellent housekeeping is a key focus.
• For quality management, the engineer is responsible to fully implement with the quality recordings, carry out result analysis and formulate action plans for continuous improvement.
• Implement and maintain proper recordings to comply with EHS, quality, client and authorities’ requirements.
• Responsible for cost management so that the materials used for both temporary works and permanent works are not damaged or control the wastage within specified tolerance. Rework or abortive work which has serious time and cost impacts shall be avoided.
• Ad-hoc matters as assigned by the PM which is necessary for the execution of the project.

Job Requirements

• Diploma/Bachelor's degree in Civil & Structural Engineering
• Mininum 2 - 5 years' experience working in construction industry
• Preferably with HDB experience

Job Description & Requirements

Job Description

a) To report to the Manager or team leader as shown in the organization chart. He/she is responsible for the assigned or related project tasks and responsibilities.

b) The detailed duties and responsibilities include but not limited to the following:

i) Study and fully understand the ISO requirements, technical drawings, scope, contractual requirements and sub-contract agreements. Work with the consultants to resolve technical issues prior to construction.

ii) Submit to superior for feedback and concurrence on short or medium-term programmes and execute the works according to the detailed programme.

iii) Ensure that the works are carried out according to the approved drawings, quality procedures and EHS requirements. Managing the works with excellent housekeeping is a key focus.

iv) For quality management, the engineer is responsible to fully implement with the quality recordings, carry out result analysis and formulate action plans for continuous improvement.

v) Implement and maintain proper recordings to comply with EHS, quality, client and authorities’ requirements.

vi) Responsible for cost management so that the materials used for both temporary works and permanent works are not damaged or control the wastage within specified tolerance. Rework or abortive work which has serious time and cost impacts shall be avoided.

vii) Ad-hoc matters as assigned by the PM which is necessary for the execution of the project.

Job Requirements

- Diploma/Bachelor's degree in Mechanical Engineering

- Mininum 2 - 5 years' experience working in construction industry

- Have experience with HDB projects

· Drive Technical and Maintenance support to all operating facilities in instrumentation and control systems, including ICSS / DCS / PLC

· Ensure the installations are maintained and managed with respect to regulatory requirements

· Actively contribute with technical and advisory support to Operations Managers / Maintenance Managers and offshore facilities in terms of Instrumentation and Control Systems

· Actively contribute to incident investigation and provide technical support to Emergency Response team as and when required

· Participate in planned shutdown as and when required

· Review and provide the engineering solutions for Management of Change Request from Facilities as per procedure

· Review the Shutdown / Breakdown Reports and verify / carry out Root Cause Analysis

· Update Lesson Learned Register based on Management of Change Request, Shutdown / Breakdown Reports review, Survey / Audit Reports etc.

· Provide in-house training for the offshore team as and when required

· Carry out competency evaluation for onboard E&I Supervisors and Instrument technicians as requested

· Provide budget requirements in terms of maintenance, long term plan and surveys

· Provide input for new project bids and variation orders, based on Lessoned Learned from operating facilities

· Act as a mentor and resource for new employees and less experienced colleagues

· Continuously make suggestions for improvements in all spheres of influence

· Additional responsibilities as required

• Possess experience in Linux/Unix and worked in a 24/7 shifting schedule, supporting Tier 1 banks during crucial exchange times.
• Knowledgeable in the FIX protocol and proficient in monitoring tools like ITRS, Zenoss, and Grafana.
• Organize upgrades and maintenance, minimizing disruptions.
• Follow incident handling processes, including initial response, investigation, resolution, and post-incident review.
• Ensure effective communication and coordinated with technical staff, vendors, and stakeholders.

Requirement:

• Minimum Degree in computer Science or related.
• Must have worked in production support enviroment supporting banks for 5+ years.
• 5+ years of exeperiene in Linux/Unix
• Must have worked in a 24/7 rotating shift schedule.

Summary:

• Basic up to 5k
• 5 days work week
• Location: Ang Mo Kio / Yio Chu Kang / Central
• Requires BCA in BIM Cert
• Must have experienced in ACMV & LTA/SMRT

Key Responsibilities:

• Develop and design mechanical systems (HVAC, plumbing, fire protection) in 3D using BIM software (Revit, AutoCAD, etc.)
• Prepare detailed mechanical design models, drawings, and specifications for commercial, residential, and industrial projects.
• Participate in design coordination meetings with architects, MEP engineers, and contractors to resolve clashes and ensure efficient project execution.
• Utilize BIM coordination tools like Navisworks to detect clashes and implement clash resolution processes for mechanical systems.
• Produce and maintain detailed documentation, including BIM execution plans, as-built drawings, and equipment schedules.
• Perform quality control checks on mechanical systems designs and ensure accurate implementation of BIM models in the construction phases.

Key Requirements:

• Min BCA in BIM Cert
• Min 2 years relevant working experience

Interested applicants, please submit your updated resume in MS Words format by using the APPLY NOW BUTTON.

By submitting your personal data and/or resume, you give consent to the collection, use, and disclosure of your personal data and/or resume by the company (or its agent) for the purpose of the processing and administration by the company relating to this job application.

Please be notified that only shortlisted candidates will be notified.

Your recruiter for this job: Joreen

WhatsApp me @ 8780 0117 for a prompt response to your enquiry!

Joreen Hung | Reg No.: R24119971

Recruit Now Singapore Pte Ltd | EA Licence No.: 21C0845

Job title: IT Engineer

Work Location: Singapore, On-Site

Position Overview:

The IT Engineer is responsible for the IT Operations and Maintenance of the company. You will work closely with our Global IT Department to ensure the optimal performance, security, and reliability of our IT infrastructure.

Responsibilities:

IT Environment and Policy:

• Ensure a seamless IT working environment by implementing and enforcing IT policies and procedures according to our company guidelines.
• Provide responsive IT Helpdesk services and conduct necessary training sessions internally to enhance team proficiency.

IT Procurement Management:

• Oversee IT procurement activities, including but not limited to laptops, desktops, monitors, accessories, network devices, and software.
• Collaborate with vendors to ensure cost-effective and timely acquisition of IT equipment and services.

Server Management:

• Install and provide support for server hardware and operating systems.
• Manage Microsoft Active Directory, ensuring user accounts, permissions, and security policies are properly configured.
• Configure and maintain essential server components such as Antivirus servers, File and Print infrastructure, and other critical services.

Networking:

• Monitor, manage and enhance WAN/LAN accessibility and security.
• Collaborate with the network team to optimize network performance and address issues promptly.
• Implement improvements to ensure the reliability and efficiency of the network infrastructure.

Security Services:

• Implement and enforce IT security policies to safeguard organizational assets.
• Conduct vulnerability management to identify and address potential security risks.

Qualification/ Requirements:

• Bachelor’s degree or higher in Computer Science or related technical field.
• Minimum of 3 years of practical experience in IT.
• Hands-on experience in networking configuration, IT device maintenance, troubleshooting, and security reinforcement.
• Familiarity with Linux operating systems and system optimization is a strong plus.
• Proactive approach to handling responsibilities with a strong sense of duty.
• Excellent communication skills to effectively interact with team members and end-users.

The role will consist of a technical component, with a focus on material testing as well as designing new packaging systems. You will perform various types of testing for medical packaging materials and sterile barrier systems (packaging for sterile medical devices). You will design and create prototypes to support new sales growth and customer retention and assist external as well as internal customers with technical projects/package testing and consulting. You will own and manage smooth operation of a technical development center under the supervision of a senior engineer.

Primary Responsibilities

• Perform various types of physical, mechanical, analytical and integrity testing for medical device packaging materials and packaging systems

• Ensure that testing and lab procedures are performed safely. Ensure personal safety and routinely evaluate equipment for potential safety risks

• Design and create package prototypes using 2d and 3d software based on requests / inputs received from sales team. Maintain and control proper inventory of packaging materials, test material and test equipment accessories

• Maintenance of Lab equipment - Write/update work instructions, procedures, calibration instructions and test methods as required

• Liaise and collaborate with the technical team members at other global sites on technical topics and lab related activities

• Liaise and collaborate with external test labs, sterilization partners and contract manufacturing facilities, as required

• Communicate effectively with other Oliver employees both locally and globally

• Identify gaps and constantly strive to update technical capabilities of the Technical Development Center

• Provide expertise in material selection and package design of sterile barrier systems in order to support new sales growth and customer retention

• Occasionally, travel within APAC region to support our customers in the field including trial runs, troubleshooting customer processes and technical sales activities

• Actively support customer’s technical teams on new product introductions and validations

• Support the QA department with technical assessment of CAPA investigations

• Support product change notifications for customers

• Work closely within the Technical team to develop viable packaging solutions

• Qualify/Test new materials as per ISO 11607 – Ensure capability levels through thoughtful analysis and rigorous testing

• Design new products that can deliver Six Sigma process capability levels. Support/Improve existing product portfolio

• Other duties that assigned

Basic Qualifications

• B.S in Packaging engineering, chemical or mechanical engineering preferred. Candidates with a

graduate diploma in a similar engineering discipline may also apply

• 3-5yrs experience in medical device packaging

• 2d and 3d CAD knowledge / experience desired (AutoCAD 2d and Solidworks 3d preferred)

• Ability to stand and perform physical testing required.

• Strong listening ability and patience

• Ability to adapt to different working styles and cultures

• Positive attitude, ability to work under pressure and people oriented

• Strong written and verbal communication skills. Works well with people across the organization

Preferred Qualifications

Interpersonal Skills:

• Comfortable speaking before an audience

• Requires contact with others (face-to-face, by telephone, virtual meetings, VOIP or otherwise) and working and interacting in a group or team

• Ability to read, analyze and interpret data/documents/safety rules or manuals/operating instructions or procedures/maintenance

• Ability to write in a clear and concise manner

• Ability to speak effectively, present information, responds to questions in a clear and concise manner.

Technical Skills:

• MS Office, particularly Word, Excel, PowerPoint and Outlook, Essential Functions

• Knowledge of 2d and 3d CAD knowledge / experience desired (AutoCAD 2d and Solidworks 3d)

Other Skills:

• The ability to predictably and regularly attend work and to be punctual

• The ability to read and understand documents and drawings

• The ability to work cooperatively with others

• The ability to deal politely and professionally with customers and/or coworkers

Special Requirements

Ability to travel 5-10% of the time internationally

Occasional evening / weekend work might be required (e.g. night calls with USA/EU)

Summary:

• Basic up to $2400
• Variable bonus available on a yearly basis
• Location: Islandwide
• 5.5 days work week
• Work timing depends on the outlets
• Staff meals & F&B discounts

Key Responsibilities:

• Greet and welcome customers in a friendly manner
• Provide customer service by taking orders and giving menu recommendations
• Set up the tables by topping up of condiments and other preparatory tasks
• Clear and reset the table for next guest
• Perform restaurant opening and closing duties
• Ensure all guests orders and requests are completed promptly and satisfactorily
• Perform other relevant ad-hoc duties as assigned by the Duty Manager

Key Requirements:

• Experience in F&B would be highly advantageous

Interested applicants, please submit your updated resume in MS Words / PDF format by using the APPLY NOW BUTTON.

By submitting your personal data and/or resume, you give consent to the collection, use, and disclosure of your personal data and/or resume by the company (or its agent) for the purpose of the processing and administration by the company relating to this job application.

Please be informed that only shortlisted candidates will be notified.

Your recruiter for this job: Stella

WhatsApp me @ 8772 4117 for a prompt response to your enquiry!

Stella Aw Yong See Hui | R24121552

Recruit Now Singapore Pte Ltd | EA No: 21C0845

Summary:

• Women Gynae clinic
• Basic salary up to $4000
• AWS + Variable bonus
• 5.5 days work week @ 8.30am - 5.30pm, 9.00am - 1.00pm
• Location: Orchard (5 minutes walkable from Orchard MRT station)

Key Responsibilities:

• Answer phone calls, and respond to inquiries
• Liaise with patients about appointment scheduling and patient registration
• Process insurance claims, manage payment collections and issue invoice
• Assist with simple procedures in the treatment room
• Perform inventory stock check and place order if necessary
• Provide basic patient care services
• Any other ad-hoc duties assigned

Key Requirements:

• Min 2 years of experience in specialised clinical setting
• Proficient in Plato system, and medical insurance processing
• Bilingual in English and Mandarin in order to communicate effectively with Mandarin speaking patients

Your recruiter for this job: Stella

WhatsApp me @ 8772 4117 for a prompt response to your enquiry!

Stella Aw Yong See Hui | R24121552

Recruit Now Singapore Pte Ltd | EA No: 21C0845

Responsibilities:

• Handles the technical aspects of patch deployment and system updates.
• Ensures that patches are tested, scheduled, and deployed with minimal disruption to system availability.
• Responsible for testing patches in a controlled environment before deploying them to production systems.
• Verify that patches do not introduce new issues or conflicts.
• Regular scanning and analysis.
• Scheduled and controlled patch deployment.
• Perform risk-based prioritization.
• Rigorous testing in a controlled environment.
• Collaborate with customer’s IT team for user acceptance testing.
• Emergency response for critical vulnerabilities.
• Understand the customer’s infrastructure and become familiar with the Customer’s infrastructure environment and support processes and procedures to ensure supporting customer with proper SLAs.
• Troubleshoot production issues to fix any user related issues and work with principal vendors and customer to provide the resolution within the proposed timelines.
• Be available for customers’ questions in assisting their needs to support any issues and monitor customer’s environment leveraging appropriate monitoring tools as well for special scheduled activities performed during non-business hours or public holidays due to system upgrades.

The Individual and their Experience:

• Linux OS patching
• MySQL system and patching knowledge
• MSSQL system and patching knowledge
• Maria DB system and patching knowledge
• Eagerness and willingness to pick up & adapt new skills and automation.

Our customers span across industries such as financial services, TMT (Telecommunications, Media and Technology), Education, Healthcare, Retail, Government, Manufacturing and Professional services. Our focus is to engage in the dynamics of our customers’ vertical markets and apply the skills of our employees in modernizing key digital pillars, Data centres and Cloud services, Security and Network Infrastructure, Workspace communications and collaboration, Data and information strategies, and IT operations modernization.

Logicalis Group has an annualized revenue of over $1.7 billion, from operations in Europe, North America, Latin America, Asia Pacific and Africa. It is a division of Datatec Limited, listed on the Johannesburg Stock Exchange, with revenues of over $4 billion.

Interested applicants please submit your application with your expected salary and notice period to be considered for the role.

We regret that only shortlisted candidates will be notified.

As part of any recruitment process, we collect and processes personal data relating to job applicants. We are committed to being transparent about how we collect and use that data and to meeting our data protection obligations. By applying to this post and sending us your resume, you agree to the collection, use and/or disclosure of your personal data in the manner as set out in our Data Protection Notice for Job Applicants which can be found

Logicalis is committed to protecting your privacy.

Click below to view the data protection notice.

https://ap.logicalis.com/sites/default/files/2022-10/PIMS-A7.3-01%20Attachment%20I%20DP%20Notice%20for%20Job%20Applicants_updated9sept22.pdf.

What you will do:

The Systems Applications Engineer, National Accounts will Provides sales support to the engineering and sales team. Conducts engineering design and processes and / or financial analysis during project development. Generates take-off plans and specifications. Develops and writes estimates or proposals. May call on potential customers as directed by sales managers.

How you will do it:

• Oversee the application engineering team, providing configuration, enhancement, and support for technical documentation and presentations to clients.
• Customize and introduce new features to Metasys software and in-house developed applications based on end-user requirements.
• Design and construct new applications tailored to meet customer specifications and needs.
• Guide application engineers in writing and executing tests on complex programming, troubleshooting issues as they arise, and supporting product launches.
• Provide technical support and troubleshoot application issues while performing tests on complex programming and assisting in product launches.
• Assist the application manager in process improvements to enhance productivity and efficiency.
• Collaborate with system integrators (SI) to monitor their performance with quality assurance/quality control checks and ensure completion sign-off.
• Manage vendor relationships, including scoping application services and reviewing deliverables.
• Collaborate as part of a design, engineering, and operations team.
• Knowledge of ACMV and controls associated with Johnson Controls Metasys will be advantageous.
• Deliver customer support by responding to technical queries with detailed analyses of building management systems, tooling costs, and design/process improvements to meet all customer needs.
• Collaborate with engineering, sales, and operations teams to understand standard fabrication techniques, composite materials, and customer demands to develop design details.
• Create and present technical engineering information based on customer proposals, including 3D representations of products and tooling.
• Prepare cost estimates by analyzing blueprints, customer documents, and consulting with engineers and technical personnel.
• Conduct conceptual designs of composite components and assemblies to support proposals.
• Generate accurate CAD models of components and assemblies.
• Develop detailed bills of materials for proposals.

What we look for:

• Bachelor's Degree in Engineering with a minimum of 5 years of relevant experience in Access, Intrusion, and Video Management systems
• Demonstrate strong verbal and written communication skills, including the ability to efficiently articulate technical subject matter
• Good communication skills, with an ability to express and understand complex technical concepts.
• Experience of working with globally distributed teams & matrixed environment

What we offer:

• Competitive salary in a MNC environment
• Comprehensive benefits package
• On the job/cross training opportunities
• Encouraging and collaborative team environment
• Dedication to safety through our Zero Harm policy

What you will do:

• Provides sales support to the engineering /sales team. Conducts engineering design and processes and / or financial analysis during project development. Generates take-off plans and specifications. Develops and writes estimates or proposals. May call on potential customers as directed by sales managers.

How you will do it:

• Perform drafting, design and prepare engineering drawings (2D) and documentation as per customer’s/project requirements.
• Create electrical schematic, Design layout plans and detailed designs with AutoCAD software.
• Provide pre-sales support to Sales team, including proposal costing and attending technical clarifications
• meeting and/or presentation with customers
• Products sourcing from suppliers.
• Compilation and submission of all documentations as required as per the project requirements.
• Review customer’s technical comments and revise documentation and drawings.
• Visual Inspection and quality check on products/Systems.
• Prepare Functional Test Documents and Assist Project Operations Team on functional testing.
• Liaise and maintain good relationship with customers, subcontractors and suppliers

What we look for:

• Min. Diploma/Degree in Electrical/ Electronic Engineering
• More than 5 years’ experience in Marine Offshore Protection System with related experience.
• Good knowledge of NFPA/Marine Classification Rules & Regulations
• Familiar with Fire & Gas Detection, Vesda Systems.
• Proficiency in AutoCAD and Microsoft Office especially Microsoft Word and Excel.
• Resourceful, results-oriented, excellent interpersonal skills and business acumen
• Able to work independently and deliver results for multiple projects under tight deadlines
• Willingness to learn new things.
• Basic knowledge OT systems, such as SCADA and DCS
• Basic understanding of cybersecurity concepts and best practices, including risk management, threat modeling, and incident response
• Excellent analytical and problem-solving skills
• Strong communication and collaboration skills

What we offer:

• Competitive salary
• Paid vacation/holidays/sick time
• Comprehensive benefits package
• On the job/cross training opportunities
• Encouraging and collaborative team environment
• Dedication to safety through our Zero Harm policy

Overall Summary:

Network Engineer will drive the implementation of strategy for infrastructure operations and maintenance to ensure availability of stable and secure systems. He/She manages project resource allocation and develops infrastructure implementation, operations and maintenance engineers; scopes out policies and sets performance expectations. He identifies problems and presents new methodologies and/or solutions to key stakeholders to enhance and improve the delivery of infrastructure operations and maintenance services.

Roles and Responsibilities:

Support infrastructure design and implementation

• Support technical system analysis to determine the extent to which solutions perform “as required” to ensure that future solutions meet anticipated demand
• Support the design and implementation of infrastructure solutions that adhere to current architecture standards
• Lead the design installations, system migration and integration
• Lead the testing and handover of implemented infrastructure solution

Support infrastructure operations

• Support delivery of optimal infrastructure operations
• Create documents on administration, installation, configuration and troubleshooting
• Apply diagnostic tools to perform technical analysis of complex software, hardware and infrastructure equipment
• Support the development of report on infrastructure capabilities and limitations

Maintain infrastructure

• Support the improvement of maintenance capability by using automation for upgrades, enterprise backup and storage
• Identify key infrastructure operations issues and maintenance priorities
• Support the implementation of agreed infrastructure change requests and maintenance routines
• Develop report on performance and availability of infrastructure systems by review of service uptime, utilisation, throughput etc.

Optimise infrastructure performance

• Support the initiatives to improve the infrastructure systems and service delivery through automation and virtualisation technologies
• Support the monitoring of performance, availability and security of infrastructure systems and key operational metrics

Resolve incidents

• Support problem/issue identification and resolution
• Escalate problems/issues
• Support simulation of user problems to resolve operating difficulties
• Diagnose problem source through discussions with users
• Recommend system modifications to reduce user problems
• Support planned maintenance events, system backup processes and disaster recovery drills
• Support implementation of preventive solutions

Qualifications/ Requirements:

• Bachelor in Computer Engineering
• Possessed CCNA, CCNP, CCIE is preferred.
• At least 5-8 years of network experience
• Experience in leading a team of 3-5 network engineer.
• Familiar with Cisco, F5, VM
• Exposure to large scale project execution
• Open to support patches/ upgrades and Tech refresh (after office hours/ weekends)

Job Description

• Conceptualisation and design of facades, preparation of drawings and structural calculations
• Delivery of technical presentations
• Coordination with clients, architects, consultants, façade contractors, suppliers and other project team members
• Supervision of construction, site inspection and training of constructors
• Preparation of technical submissions, proposals and documentation

Job Specifications

• Singaporean or PR preferred
• Degree in Civil, Structural or Mechanical Engineering or related disciplines.
• 3 – 5 years of experience in façade design, engineering and construction and project management
• Proficient in CAD software to create designs and solve technical issues.
• Strong and diverse technical background with effective presentation skills
• Well-versed in construction trends, international design standards and building regulations.
• Possess a wide network of building professionals and property developers.
• Ability to multitask and work well in a team

Knowledge, Skills and Abilities

• Proficient in CAD and 3D Modelling software - Revit, Rhino, Sketchup software
• Possesses deep understanding about various façade materials.
• Well informed in construction trends, international design standards and building regulations.
• Demonstrate organisation and communication skills
• Possesses relationship building and networking skills.
• Skilled in interacting with people of diverse cultural backgrounds at various levels.
• Possesses strong project management skills.
• Willing and able to travel as needed (1 – 2 times/month)

Position Summary:

The Systems Engineer undertakes complex projects related to systems

provisioning, installations, configurations as well as monitoring and

maintenance. He/She applies highly developed specialist knowledge and

skills in systems administration and works toward continuous optimisation

of systems performance. He/she implements systems improvements and

instructs other IT staff in the resolution of complex issues. He/She is required

to be on standby with on-call availability with varied shifts including

nights, weekends and holidays.

He/She is able to quickly and effectively solve issues as they arise. He/She is able

to methodically identify the cause of the issue, evaluate it and develop a

solution in

collaboration with the team. He/She communicates effectively and displays

high level of service standards.

Role and Responsibilities:

Execute Systems Administration Service Levels

• Monitor systems performance and usage, including response times
• Supervise backups, optimisation, initiation of recovery procedures and routine troubleshooting
• Communicate regularly with technical, applications and operational staff to ensure systems integrity and security
• Determine the systems’ short- and long-term requirements
• Manage systems report production

Advise on System Capabilities

• Advise senior leaders on system concepts and functional capabilities
• Provide technical advice to the team and clients on installation, setup configuration of systems
• Interpret internal or external business issues and recommends solutions/best practices
• Implement plans to make systems available to users in a shared, secure and controlled manner

Develop New Systems

• Lead the development of new systems as per the system requirements
• Design security and integrity controls
• Conduct new systems testing and implementation
• Define the system maintenance procedures
• Analyse the use of new systems to identify enhancement needs
• Lead research initiatives for the development of advanced and automated approaches for system administration
• Optimise systems performance
• Seek opportunities to optimise the delivery of systems services with emphasis on availability, reliability, scalability, and security
• Conduct regular system audits and upgrades
• Develop automated processes to define, measure, and report on service quality, stability and capacity Resolve issues
• Oversee the assessment of risks to systems
• Identify complex system issues to provide advisory to the stakeholders
• Investigate cause of systems issues
• Resolve complex issues
• Provide escalation support for issues presented by the user

Requirements / Qualifications

• Degree in Computer Science, Engineering or equivalent.
• At least 5 - 8 years’ experience in developing, implementing and
• maintaining IT systems
• Systematic in approach and familiar with enterprise level troubleshooting.
• Strong communications skills with stakeholders and ROs.
• Experience in healthcare applications preferred and/or willing to take up the challenges in a healthcare related industry.

Position Summary / Project Description

This is for the Automation Team under the Systems Technologies which focuses on DevOps and automation for internal IT that includes a lot of automation work around IaC.

Roles And Responsibilities

• Design, develop and implement various infrastructure automation and robotic process automation to transform current operation processes.
• Present ideas for process/system transformation
• Work with various process owners and teams to develop and implement proposed ideas and automate repeatable tasks
• Ensure smooth transition of processes

Requirements / Qualifications

• Minimum Degree in Computer Science / Information Technology or equivalent.
• Proficient in automation technologies such as Ansible, Chef, CI/CD, Jenkins, Terraform etc.
• Minimum 4 years and above of relevant hands-on experience in system operation support and project management.
• Proven ability to work creatively and analytically in a problem-solving environment demonstrating teamwork, innovation and excellence.
• Experience in troubleshooting, resolving, and communicating incidents and underlying issues to identify root cause.
• Possesses strong analytical skills to diagnose and address application problems.
• Result and customer oriented with multi-tasking capabilities

About Us

Vivo Surgical is a patient-focused, clinician-driven medical device developer and manufacturer. Headquartered in Singapore with offices in China and Thailand, we are pioneering a novel endoscopic surgical robot for complex endoluminal surgeries. ISO 13485 certified with international accreditations awarded such as the US FDA and European CE mark, our devices target the medical needs of the world through innovative applications of science & technology. These encompass such fields as in vivo surgical LED lighting, portable endoscopy and endoscopic robots, which are strategically co-developed with world-class healthcare institutions and KOL collaborators. Join us as we build towards our vision of being Asia Pacific’s leading medical device developer and manufacturer.

About The Role

We value the importance of having a robust engineering team that would serve as a key pillar for sustained commercial success. To that end, we are looking for an Electrical Engineer to join us on this journey. In this role, you will be part of our fast-growing team and will take ownership of your role from the get-go. You will be working on the electrical interfaces of our robot from the design and development phase all the way to manufacturing. You will be developing these solutions alongside our clinical KOLs to produce and test the parts and subsystems that will eventually be integrated into the robotic system. Throughout the process, you will also be involved in the verification and validation testing phase such as producing testers, generating test protocols and reports. Your role will require you to work in close tandem with our external partners and suppliers.

Your responsibilities shall include the following:

• Involved in the establishment of the robotic system’s design requirements according to users’ needs.
• Design and develop hardware system architecture and electrical systems based on set requirements.
• Generate schematics and electrical diagrams following respective standards and best practices.
• Source, evaluate and troubleshoot components, PCBAs, wire harnesses and subsystems.
• Assist in developing test protocols and reports to verify various subsystems and the main system.
• Involved in developing testers and test tools for verification tests.
• Support the team with electrical safety and EMC testing.
• Take part in the design control and risk management documentation generation tasks.
• Work with the team to optimize the system’s cost, manufacturability, quality, and reliability.
• Contribute and watch your ideas materialize into the fast-paced iterations of our system to constantly strive to meet the end users’ needs.

Your Qualifications & Experience

• Minimum Bachelor’s degree in Electrical Engineering, or related.
• At least 3 years’ experience in Electrical, Embedded Systems, Robotic Engineering, or related fields.
• Skilled in PCB design software such as Altium Designer or other similar tools.
• Experience in circuit design with ARM MCUs is essential.
• Hands-on experience with embedded communication protocols such as UART, I2C, SPI, CAN, TCP.
• Knowledge of embedded platforms such as MCUs (STM32), DSP, FPGA will be advantageous.
• Adept at utilizing equipment such as multimeters, oscilloscopes and spectrum analyzers.
• Hands-on experience with soldering equipment and crimpers preferred.
• Knowledge of C/C++ and Linux will be an advantage.
• Understanding of standards such as IEC 60601-1, 60601-1-2 and 62304 will be a plus.
• Strong analytical, troubleshooting, problem-solving, and communication skills.
• Ready to embrace a positive and collaborative mindset to thrive in the dynamic start up environment.

Contact

Please send your CV and cover letter to: [email protected]. We look forward to receiving your application.

Who we are

Crédit Agricole Corporate and Investment Banking (CA-CIB) is the CIB arm of Crédit Agricole Group, world’s 11th largest bank by total assets.

Our Singapore center is one of the 3 main IT Hubs for CA-CIB's worldwidebusiness. We work daily with international branches located in 33 countries by:

- Envisioning and preparing the Bank’s futures information systems

- Partnering and supporting core banking flagships and transverse areas in their large scale development projects.

- Providing premium In-house Banking applications,

This unique positioning empowers us to bring our core banking business a sustainable competitive advantage on the market.

We seek innovative and agile people sharing our mindset to support ambitious and forthcoming technological challenges.

Position

In a challenging and multicultural environment, we seek a senior project management manager to manage the Project management (PM) team and to drive the complex programs/projects, part of the control tower section.

Mission: by mobilizing and managing project teams and contributors, you will conduct projects from inception to completion, to reach the project goals in terms of quality, planning and budget.

Within an international environment, you will have to liaise with all kind of stakeholders and align your resources to the target set together with the business in order to meet the bank objectives.

Main responsibilities

§ Manage the list of CIB IT projects, collaborating with leadership across the departments and prioritize projects based on the business need.

§ Direct the work of Project managers and provides managerial oversight for multiple projects

§ Act as point of escalation for the Project management team.

§ Create and develop a governance structure for efficient stakeholder management

§ Promote the project management service

§ Develops organizational project management capabilities through training, coaching, and individual meetings/discussions

§ Develop strategy for control and governance structures to ensure desired outcomes across the projects

§ Monitor and analyse project metrics and to propose improvements and cost savings for future projects

§ Ensure successful delivery of all projects against cost, time, scope, quality and security measures

§ Operate autonomously and handle large scale APAC/EMEA regional IT projects by understanding local regulations.

§ Clarify the needs of the client and translate them into rigorous requirement lists

§ Identify standard and project specific deliverables, key assumptions, follow and mitigate risks and issues

§ Anticipate early in the project any compliance / regulatory requirement and start informing stakeholders of such risk and measure their impact

§ Define, measure and report project KPI with right level of information

§ Identify right resource within teams and constitute / coordinate project team members

§ Report or escalate any important risk and issues to Sponsor and local management for appropriate action

§ Create, review or adapt when necessary existing processes to make them more relevant, efficient and optimal

§ Communicate to Sponsor any change with right level of information and manage to get his approval

§ Follow, report budget actual/forecast to project stakeholders and local management

§ Set relevant control in place to ensure that what has been delivered meets requirements validated

§ Manage and document the project hand over with production teams

§ Continuously improve project management toolkits and methodologies

Qualifications and Profile

This position requires a minimum of 8 years of relevant experiences, ideally in a CIB banking environment.

§ Leadership

§ Excellent team management skills

§ Strong ability to understand the big picture

§ Ability to drill down complex issues to simple comprehensible terms

§ Demonstrated skill to work across functions, regions and cultures

§ Excellent problem solving and conflict resolution skillset

§ Strong communication with wide variety of individuals at all executive levels

§ Ability to Influence and motivate

Functional

§ Expertise in project cycle management and methodology

§ Ability to anticipate and manage risks

§ Hands on knowledge and understanding of Infrastructure main components

§ Strong project management experience with ability to work on multiple projects at the same time

§ PMP or other certification would be a plus

Technical

§ Experience in dealing with detailed IT Architecture in banking industry.

§ Practical knowledge in Network, Security, Data Center, Windows, Linux, Aix, VMware, Citrix, SAN, Kubernetes and Middleware components.

§ Exposure working with DevOps & Cloud technologies.

§ Familiarity in handling Cyber Security and regulatory projects.

§ Strong experience in working with tools like MS Project, Excel, PowerPoint, Word, and Visio.

§ Understanding of software development will be a plus

Other Professional Skills and Mindset

§ High organizational skills including time management

§ Excellent verbal and written communication across all levels of the organization

§ Team player mindset

§ Able to cope with multiple technologies, environment and teams, with high pressure

§ Good influencing, negotiation, conflict resolution and data analysis skills

On behalf of our hiring client who is an Original Equipment Maker (OEM), we are looking for a suitable candidate to join them as Product Design Engineer (Electrical).

Responsibilities:

• Provide technical support to the Project team, Installation on problem verification, report and coordinate with Group on job site issues and technical solutions related to electrical design.
• Involving in design interfacing and parts provision among Group of companies.
• Participate in the resolution of design problems related to Error/Trouble investigation, and formulate corrective & preventive measures.
• Provide engineering support to Sales Team for new products.
• Provide Maintenance Works Inquiry/Spare Parts Inquiry/Order Supports.
• Any other ad-hoc matters assigned by the Manager.

Requirement

• Degree/Diploma in Electrical Engineering with at least 2-3 years experience in electrical design work.
• Proficient in Auto CAD & 3D software is essential
• Fresh degree holders are welcome to apply

EA license : 22C0971 | EA Registration : R21101298

Location: East

Summary:

• Basic up to $4500
• Yearly variable bonus
• 5 days work week
• Location: Pioneer
• MNC company - stable revenue
• Strong in Solidworks
• Familiar with CATIA

Key Responsibilities:

• Produce CNC design solutions for customize specification
• Produce design for automation
• Make drawings (2D & 3D) in CATIA
• Make parts explosion / BOM list using ENOVIA
• Documentation for fabrication
• Evaluation for design solutions
• Support production for machine modification design
• Do engineering presentations
• Other related adhoc duties

Key Requirements:

• Min Diploma in Mechanical Engineering
• Min 2 years relevant working experience
• Strong in Solidworks & CATIA

Interested applicants, please submit your updated resume in MS Words format by using the APPLY NOW BUTTON.

By submitting your personal data and/or resume, you give consent to the collection, use, and disclosure of your personal data and/or resume by the company (or its agent) for the purpose of the processing and administration by the company relating to this job application.

Please be notified that only shortlisted candidates will be notified.

Your recruiter for this job: Stella

WhatsApp me @ 8772 4117 for a prompt response to your enquiry!

Stella Aw Yong See Hui | R24121552

Recruit Now Singapore Pte Ltd | EA No: 21C0845

Summary:

• Basic salary up to $4000
• Variable bonus on a yearly basis
• OT fees available
• 5 days work week
• 7.30am - 5.00pm
• Location: Jurong East
• Engineer / Assistant engineer with mechanical background

Key Responsibilities:

• Ensure manufacturing processes operated with minimize manufacturing costs
• Manage the processes improvement program based on best practices in the metal drum making industry
• Conduct employee performance reviews and work closely with the HR department for any staff grievances
• Maintain work safety practice as well as housekeeping in all areas
• Prepare process documentation such as work instruction, process specifications and assist on the quality plan
• Ensure the subordinates are trained and equipped with up-to-date knowledge and skills
• Assist HR in OT records as well as recruitment of production personnel
• Prepare reports, maintain up-to-date training manuals and make recommendations for operation improvement
• Other relevant ad-hoc duties

Key Requirements:

• Min 2 years of experience in manufacturing
• Preferably with mechanical background
• Willing to work OT when needed
• Bilingual in English and Mandarin to communicate effectively with Mandarin speaking clients / stakeholders

Interested applicants, please submit your updated resume in MS Words / PDF format by using the APPLY NOW BUTTON.

By submitting your personal data and/or resume, you give consent to the collection, use, and disclosure of your personal data and/or resume by the company (or its agent) for the purpose of the processing and administration by the company relating to this job application.

Please be informed that only shortlisted candidates will be notified.

Your recruiter for this job: Stella

WhatsApp me @ 8772 4117 for a prompt response to your enquiry!

Stella Aw Yong See Hui | R24121552

Recruit Now Singapore Pte Ltd | EA No: 21C0845

Job Descriptions:

• Transport shipping containers from one port to another (i.e. Keppel Terminal, Brani Terminal, Pasir Panjang Terminal and Tuas Terminal)
• Ensure that the IGH truck is clean and in serviceable operating conditions
• Practise safe driving habits in compliance with PSA and public traffic rules

Job Requirements:

• Able to speak and write simple English
• Possess a Singapore Class 4/5 driving licence
• Familiar with Singapore’s road network and traffic
• Preferably 1 year of experience driving Class 4 trailer-trucks
• Good physical health to handle shift schedules and working outdoors
• Day Shift: 7.30am to 7.30pm (meal break included)
• Night Shift: 7.30pm to 7.30am (meal break included)

Still unsure? You can contact (message) +65 8035 8901 to arrange to speak to our friendly career advisors!

Repairing and maintaining: Fixing or replacing faulty equipment, electrical switches, outlets, and circuit breakers. They also perform routine maintenance to ensure machines keep running smoothly,

Inspecting: Regularly inspecting buildings, systems, and equipment to identify potential issues,

Troubleshooting: Diagnosing problems and determining the best way to correct them,

Planning: Planning repair work using blueprints or equipment manuals,

Cleaning: Cleaning and assisting with upkeep of the facilities.

• High Salary with Attractive Bonus Package (Bond Completion & Year-end Bonus)

• Service Bonus up to $10,000.

• No Experience Required; Training and Certification Provided

• Evergreen Industry with Job Security

• Opportunities for Growth/Career Progression (supervisory positions available)

• Supportive and Compassionate Management Team

Job Descriptions:

• As a Lashing Specialist, your primary responsibility will be to secure and unsecure containers on cargo ships to ensure the safe transportation of goods to their destination. You will play a crucial role in preventing damage and ensuring the integrity of the cargo during transit.

• In addition, you will also work in teams to secure large cargo ships to the port’s berth.

Job Requirements:

• Candidates with no experience are welcomed!

• PSLE pass in English

• Bonus points for candidates who can work at height

• Good physical health to handle shift schedules and working outdoors

• Day Shift: 9.30am - 9.30pm (meal break included)

• Night Shift: 9.30pm - 9.30am (meal break included)

• Candidates who can rotate between day & night shifts will be considered first

• Flexible rostering can be arranged (subject to operational needs)

Still unsure? You can contact (message) +658035 8901 to arrange to speak to our friendly career advisors!

Highlights:

• High Salary with Attractive Bonus Package (Bond Completion & Year-end Bonus)

• Service Bonus Up to $10k For Class 3, 4 or 5 Driving license Holder

• No Experience Required; Training and Certification Provided

• Evergreen Industry with Job Security

• Opportunities for Growth/Career Progression (supervisory positions available)

• Supportive and Compassionate Management Team

Job Description:

• Drive prime mover trucks to transport shipping containers from container ships to designated locations within the PSA Pasir Panjang terminal.

Job Requirements:

• Candidates with no experience are welcome!

• PSLE pass in English language

• Bonus points for candidates who possess a Singapore Class 3/4 driving licence (We offer sponsorship for Class 3 driving licences.)**

• Safety-conscious and have a good driving record without significant violations or accidents

• No medical concern to handle shift schedules and working outdoors

• Day Shift: 7.30am - 7.30pm (meal break included)

• Night Shift: 7.30pm - 7.30am (meal break included)

• Candidates may choose any preferred shift (Day/Night/Rotating)

• Flexible rostering can be arranged (subject to operational needs)

Still unsure? You can contact (message) +65 8035 8901 to arrange to speak to our friendly career advisors!

**Only short listed candidates will be notify**