Our client is from Oil and Gas industry. They are looking for a Senior Mechanical Engineer for the next phase of their business. They are located in West.

Duties:

• Responsible in guiding the maintenance, troubleshooting, repair, commissioning and substitute of mechanical or piping equipment within the Gas Engine Generators as well as its additional systems such as gas engine, pipeline, pressure pipe, ACMVs, lube oil and coolant pumps arrangement.
• Responsible in supporting mechanical support and solutions for the process & care and providing the development of care strategy including procedure/specification focusing on equipment dependability, spares inventory necessity, shutdown and inspection lists, preventive and prophetic care programmed.
• Responsible in managing and work meticulously with internal contractor and equipment seller to perform maintenance work at the Gas Engine Generators Building and terminal.
• Responsible to make certain compliance to appropriate regulations, manipulate safely, fit for object, maintainable and trustworthy for the site’s modified or anew build mechanical setup (such as gas engine, pumps, gravity vessel, safety facilities, etc).
• Responsible in guiding technical negotiations, execute and succeed project schedules or cost as well as collaboration with outward and internal shareholders, merchants for end of life and development project using company Management of Change process for machinery facilities.
• Responsible in supplying technical practicing as required in the area of process, maintenance, fault resolution of the Gas Engine Generators.
• Responsible in contacting with exterior investor including administration agencies on approbation and risk of closure of electrical arrangement that will influence gas-send out.

Requirements

• Min Bachelor’s Degree in Mechanical Engineering or any relevant field.
• Min 3 to 5 years’ experience in relevant industry for maintenance of rotary and staticequipment is needed
• Prior experience in different types of gas/diesel machine knowledges is a bonus.

Interested candidates who wish to apply for the advertised position, please click APPLY NOW or email an updated copy of your resume/cv.

We regret that only shortlisted candidate will be notified.

Email Address: [email protected]

Recruitpedia Pte. Ltd.

EA License No: 19C9682

EA Personnel No: R2198636 (Oh Puey Xin)

Due to expansion of our client's business, we continue to look for suitable candidates to work at our client's data centre site. Write to us if you are an individual who has experience in the activities listed below, and is keen to take up new challenges!

Responsibilities:

1. Planned Preventive Maintenance (PPM):

• Develop and implement PPM schedules for ACMV systems.
• Ensure compliance with manufacturers’ guidelines, safety standards, and regulatory requirements.
• Inspect and service chillers, cooling towers, pumps, air-handling units (AHUs), fan coil units (FCUs), ventilation fans, and duct systems, etc
• Monitor and maintain ACMV control systems.
• Manage the calibration of temperature sensors, humidity sensors, and pressure gauges.
• Maintain records of maintenance activities, equipment logs, and service reports.

2. Emergency Response/Corrective Maintenance:

• Develop and maintain contingency plans for system breakdowns or emergencies.
• Provide 24/7 technical support during critical issues, such as chiller breakdowns or BMS malfunctions.
• Diagnose and resolve faults or malfunctions in HVAC systems.
• Perform repairs on compressors, condensers, motors, pumps, and electrical components.
• Work closely with contractors or vendors when complex repairs are needed.
• Prepare detailed Incident reports for maintenance issues.

3. Spare Parts & Inventory Management:

• Manage inventory of spare parts, consumables, and tools.
• Coordinate with procurement for replenishing parts based on maintenance needs.
• Track equipment warranties and service contracts.

4. Coordination

• Engage with building managers and tenants to address ACMV requirements.
• Participate in site audits and inspections, ensuring quality and timeliness of maintenance work.
• Supervise on-site technicians, ensuring adherence to safety protocols and maintenance standards.

5. Compliance & Safety:

• Ensure all maintenance activities adhere to workplace safety and environmental standards.
• Conduct regular risk assessments and ensure compliance with local regulatory requirements
• Organize safety drills and routine inspections for emergency equipment like smoke extraction fans and pressurization systems.
• Ensure compliance with regulatory documentation, such as safety certifications and inspection records

Requirements:

• Diploma in Mechanical Engineering, Building Services, or equivalent.
• At least 1 year experience in ACMV system maintenance (e.g., chillers, AHUs, BMS).
• Knowledge of energy management and HVAC controls.
• Certification in workplace safety will be preferred
• Proficient in troubleshooting tools and preventive maintenance software.
• Ability to interpret engineering drawings and technical manuals.
• Good communication and coordination skills for client and vendor management

Please send your cv to

• [email protected]
• listing your personal particulars, education qualification and work experience;
• listing your current and expected salary details.

As we are hiring this position urgently, we do look forward to hearing from you VERY SOON!

Only shortlisted candidates will be notified.

EA Licence No: 22C1055

EA Personnel Registration No: R2095104

Due to expansion of our client's business,we continue to look for suitable candidates to work at our client's data centre site.Write to us if you are an individual who has experience in the activities listed below, and is keen to take up new challenges!

Responsibilities:

1. Planned Preventive Maintenance (PPM):

• Develop and implement PPM schedules for Electrical systems.
• Ensure compliance with manufacturers’ guidelines, safety standards, and regulatory requirements.
• Inspect and service Electrical Switchboard, circuit breaker, Protection relay etc
• Monitor and maintain Electrical control systems.
• Manage the calibration of power meters, current transformers, etc
• Maintain records of maintenance activities, equipment logs, and service report

2. Emergency Response/Corrective Maintenance:

• Develop and maintain contingency plans for system breakdowns or emergencies.
• Provide 24/7 technical support during critical issues, such as Electrical System down.
• Diagnose and resolve faults or malfunctions in Electrical systems.
• Perform repairs on cables, contactors, fuses, motors, and electrical controls.
• Work closely with contractors or vendors when complex repairs are needed.
• Prepare detailed Incident reports for maintenance issues.

3. Spare Parts & Inventory Management:

• Manage inventory of spare parts, consumables, and tools.
• Coordinate with procurement for replenishing parts based on maintenance needs.
• Track equipment warranties and service contracts.

4. Coordination

• Engage with building managers and tenants to address electrical requirements.
• Participate in site audits and inspections, ensuring quality and timeliness of maintenance work.
• Supervise on-site technicians, ensuring adherence to safety protocols and maintenance standards.

5. Compliance & Safety:

• Ensure all maintenance activities adhere to workplace safety and environmental standards.
• Conduct regular risk assessments and ensure compliance with local regulatory requirements
• Organize safety drills and routine inspections for emergency equipment like smoke extraction fans and pressurization systems.
• Ensure compliance with regulatory documentation, such as safety certifications and inspection records.

Requirements:

• Diploma in Electrical Engineering, Building Services, or equivalent.
• At least 1 year experience in Electrical system maintenance
• Knowledge of energy management and electrical services
• Certification in workplace safety will be preferred
• Proficient in troubleshooting tools and preventive maintenance software.
• Ability to interpret engineering drawings and technical manuals.
• Good communication and coordination skills for client and vendor management.

Please send your cv to

• [email protected]
• listing your personal particulars, education qualification and work experience;
• listing your current and expected salary details.

As we are hiring this position urgently, we do look forward to hearing from you VERY SOON!

Only shortlisted candidates will be notified.

EA Licence No: 22C1055

EA Personnel Registration No: R2095104

Our client is from Oil and Gas industry. They are looking for a Senior Mechanical Engineer for the next phase of their business. They are located in West.

Duties:

• Responsible in guiding the maintenance, troubleshooting, repair, commissioning and substitute of mechanical or piping equipment within the Gas Engine Generators as well as its additional systems such as gas engine, pipeline, pressure pipe, ACMVs, lube oil and coolant pumps arrangement.
• Responsible in supporting mechanical support and solutions for the process & care and providing the development of care strategy including procedure/specification focusing on equipment dependability, spares inventory necessity, shutdown and inspection lists, preventive and prophetic care programmed.
• Responsible in managing and work meticulously with internal contractor and equipment seller to perform maintenance work at the Gas Engine Generators Building and terminal.
• Responsible to make certain compliance to appropriate regulations, manipulate safely, fit for object, maintainable and trustworthy for the site’s modified or anew build mechanical setup (such as gas engine, pumps, gravity vessel, safety facilities, etc).
• Responsible in guiding technical negotiations, execute and succeed project schedules or cost as well as collaboration with outward and internal shareholders, merchants for end of life and development project using company Management of Change process for machinery facilities.
• Responsible in supplying technical practicing as required in the area of process, maintenance, fault resolution of the Gas Engine Generators.
• Responsible in contacting with exterior investor including administration agencies on approbation and risk of closure of electrical arrangement that will influence gas-send out.

Requirements

• Min Bachelor’s Degree in Mechanical Engineering or any relevant field.
• Min 3 to 5 years’ experience in relevant industry for maintenance of rotary and staticequipment is needed
• Prior experience in different types of gas/diesel machine knowledges is a bonus.

Interested candidates who wish to apply for the advertised position, please click APPLY NOW or email an updated copy of your resume/cv.

We regret that only shortlisted candidate will be notified.

Email Address: [email protected]

Recruitpedia Pte. Ltd.

EA License No: 19C9682

EA Personnel No: R2198636 (Oh Puey Xin)

Our client is from Oil and Gas industry. They are looking for a Senior Mechanical Engineer for the next phase of their business. They are located in West.

Duties:

• Responsible in guiding the maintenance, troubleshooting, repair, commissioning and substitute of mechanical or piping equipment within the Gas Engine Generators as well as its additional systems such as gas engine, pipeline, pressure pipe, ACMVs, lube oil and coolant pumps arrangement.
• Responsible in supporting mechanical support and solutions for the process & care and providing the development of care strategy including procedure/specification focusing on equipment dependability, spares inventory necessity, shutdown and inspection lists, preventive and prophetic care programmed.
• Responsible in managing and work meticulously with internal contractor and equipment seller to perform maintenance work at the Gas Engine Generators Building and terminal.
• Responsible to make certain compliance to appropriate regulations, manipulate safely, fit for object, maintainable and trustworthy for the site’s modified or anew build mechanical setup (such as gas engine, pumps, gravity vessel, safety facilities, etc).
• Responsible in guiding technical negotiations, execute and succeed project schedules or cost as well as collaboration with outward and internal shareholders, merchants for end of life and development project using company Management of Change process for machinery facilities.
• Responsible in supplying technical practicing as required in the area of process, maintenance, fault resolution of the Gas Engine Generators.
• Responsible in contacting with exterior investor including administration agencies on approbation and risk of closure of electrical arrangement that will influence gas-send out.

Requirements

• Min Bachelor’s Degree in Mechanical Engineering or any relevant field.
• Min 3 to 5 years’ experience in relevant industry for maintenance of rotary and staticequipment is needed
• Prior experience in different types of gas/diesel machine knowledges is a bonus.

Interested candidates who wish to apply for the advertised position, please click APPLY NOW or email an updated copy of your resume/cv.

We regret that only shortlisted candidate will be notified.

Email Address: [email protected]

Recruitpedia Pte. Ltd.

EA License No: 19C9682

EA Personnel No: R2198636 (Oh Puey Xin)

Our client is from Oil and Gas industry. They are looking for a Senior Mechanical Engineer for the next phase of their business. They are located in West.

Duties:

• Responsible in guiding the maintenance, troubleshooting, repair, commissioning and substitute of mechanical or piping equipment within the Gas Engine Generators as well as its additional systems such as gas engine, pipeline, pressure pipe, ACMVs, lube oil and coolant pumps arrangement.
• Responsible in supporting mechanical support and solutions for the process & care and providing the development of care strategy including procedure/specification focusing on equipment dependability, spares inventory necessity, shutdown and inspection lists, preventive and prophetic care programmed.
• Responsible in managing and work meticulously with internal contractor and equipment seller to perform maintenance work at the Gas Engine Generators Building and terminal.
• Responsible to make certain compliance to appropriate regulations, manipulate safely, fit for object, maintainable and trustworthy for the site’s modified or anew build mechanical setup (such as gas engine, pumps, gravity vessel, safety facilities, etc).
• Responsible in guiding technical negotiations, execute and succeed project schedules or cost as well as collaboration with outward and internal shareholders, merchants for end of life and development project using company Management of Change process for machinery facilities.
• Responsible in supplying technical practicing as required in the area of process, maintenance, fault resolution of the Gas Engine Generators.
• Responsible in contacting with exterior investor including administration agencies on approbation and risk of closure of electrical arrangement that will influence gas-send out.

Requirements

• Min Bachelor’s Degree in Mechanical Engineering or any relevant field.
• Min 3 to 5 years’ experience in relevant industry for maintenance of rotary and staticequipment is needed
• Prior experience in different types of gas/diesel machine knowledges is a bonus.

Interested candidates who wish to apply for the advertised position, please click APPLY NOW or email an updated copy of your resume/cv.

We regret that only shortlisted candidate will be notified.

Email Address: [email protected]

Recruitpedia Pte. Ltd.

EA License No: 19C9682

EA Personnel No: R2198636 (Oh Puey Xin)

Responsibilities:

• Responsible for planning and implementing the execution of preventive and corrective programs within schedule in compliance to regulatory standards and requirements.
• Perform troubleshooting/ faut diagnosis/ failure analysis to determine cause of failure for equipment.
• Development of Standard Operating procedures (SOP) and Work Instructions (WI) to technicians to develop their competence.
• Develop and perform Risk Assessments to evaluate mitigation measures for all maintenance activities.
• Establish and maintain proper document system to achieve all jobs internally for sharing and audit purposes.
• Assist in identification, planning and reviewing of necessary training needs for mentoring and coaching of maintenance staffs.
• Preparation and write maintenance and spares consumption report.
• Perform other duties as instructed by Management.

Requirements:

• Degree in Engineering or related discipline
• 2–3 years of relevant work experience
• Ability to relate work with different stakeholders
• Proficiency in Excel, Words and Powerpoint
• Able to think and work independently and as a team member in a challenging environment

If you meet the requirements of this role, please email a detailed resume in Word document to Chloe Tan Hui Lin. Email: [email protected]

Chloe Tan Hui Lin

CEI Registration No.: R1765524

Recruit Express Pte Ltd

EA99C4599

*All information will be treated with strictest confidence. We regret that only short-listed applicants will be notified

Job Description:

• Attend to all the maintenance & repair job required and ensure successful completion.
• Perform preventive maintenance in all production machines.
• Report and identify any defect or faults found during preventive maintenance.
• Perform routine maintenance, troubleshooting, and repairs on stamping presses, feeders, conveyors, and other related equipment.
• Inspect mechanical, hydraulic, pneumatic, and electrical systems to identify wear, damage, or potential failures.
• Develop and adhere to preventive maintenance schedules to minimize downtime and maintain equipment reliability.
• Conduct periodic inspections and adjustments to ensure machinery operates at peak performance.
• Use diagnostic tools, schematics, and blueprints to identify and resolve equipment malfunctions.
• Collaborate with engineering teams to implement effective solutions for recurring issues.
• Ensure proper operation of safety devices, sensors, and automation systems.
• Maintain detailed maintenance logs, repair records, and inventory of spare parts.
• Report significant issues, root cause analyses, and resolutions to supervisors or engineering teams.
• Ensure compliance with workplace safety regulations and company policies.
• Conduct regular inspections to verify equipment meets safety and quality standards.
• Suggest and implement process improvements to enhance equipment efficiency and reduce downtime.
• Participate in training programs to stay updated on new technologies and techniques in the industry.
• Any other duties as assigned by superior and/or management.

Requirements:

• Minimum NTC 3 in Mechanical/Electrical Fitting.
• Certification in maintenance and reliability (e.g., CMRP) is advantageous.
• 2–5 years of experience in maintenance within a stamping or manufacturing environment is highly desirable.

Responsibilities:

• Serve as the main point of contact for the maintenance project.
• Coordinate maintenance requests, receive instructions, and attend meetings.
• Ensure all works comply with the approved works program and methodology.
• Manage relationships with clients, contractors, and suppliers.
• Prepare and submit reports, quotes, and other required documents.
• Review and accept deliverables.
• Supervise the Maintenance Team.
• Arrange major contracts for services performed by sub-contractors.
• Establish service agreements, including leases and insurance for vehicles and policies related to maintenance work.
• Conduct regular reviews of the Maintenance Plan with the Project Manager.
• Submit monthly maintenance reports and attend all maintenance meetings.
• Plan and schedule routine preventive maintenance.
• Review the performance of routine preventive and corrective maintenance with Team Leads.
• Conduct regular reviews of Standard Maintenance Procedures.

Requirements:

• Relevant engineering/technical degree or diploma from a recognized university or tertiary institution.
• Must at least have 5 years of relevant working experience in the maintenance of IT or electronic systems.
• PMP certification required for diploma holders.

The Maintenance Technician is responsible for assisting in the maintenance of mechanical or electrical installations and equipment. Provides general assistance in the maintenance of the company’s plant, machinery, building and associated facilities. Carries out routine inspection and servicing of the company’s mechanical and electrical installations, building and associated facilities, refrigeration plants and air-conditioning units, plumbing and sanitary systems, machinery and equipment. Attends to complaints from users and carries out minor repairs. Monitors and keeps daily records of readings on various gauges, thermometers, pumps and other equipment and makes the necessary adjustments to correct any malfunctioning.

· Equipment in a safe and operational state of readiness at all times in order to fulfil daily operation requirements.

· Carry out preventive maintenance checks on allocated machines

· Carry out troubleshooting on the allocated machines to find the root cause and repair the defective machines to minimize downtime.

· Actively works on ongoing review, improve & monitor manufacturing capabilities to improve operational performance and efficiencies.

Requirements:

• ITE/Diploma in Electrical/ Mechanical related will be preferred
• Able to read, write and communicate in English
• Proficient in Microsoft Office preferred - outlook, excel & word
• Attention to detail and accuracy
• Has ownership and team player value
• Has Experience Industrial Electrical
• Clean up the work area after completion of the task

• Assist the Operations Manager/Executive & Building Supervisor on a day to day operations
• Attend to the breakdown of the air-conditioning system, plumbing and electrical issue
• Attend to complaints, calls and queries from tenants on operation related matters
• Troubleshoot some minor technical / facility problems
• Carry out preventive maintenance according to maintenance work schedule
• Conduct daily inspections (checklist)
• Recommend and suggest preventive maintenance or repair to the Operations Manager/Executive & Building Supervisor to minimize emergency breakdown of service
• Carry out joint inspections with the term service provider during the regular servicing
• Supervise to ensure that repair and replacement work are carried out properly by a term service provider or contractor in a timely manner
• To supervise & monitor term service providers & contractors to make sure they comply with workplace safety & health legislation, guideline & code of practice
• To sign off service provider service report
• To assist in Marcom events when necessary such as sound system & lightings
• To call & coordinate M&E breakdown with the service provider
• To inspect daily for units under fitting out during fit-out period and units under reinstatement
• Check the vacant unit/units which are taking-over or handing-over, to draw up technical / building specifications eg. to confirm the electrical / exhaust capacity, water & drainage provisions etc.

Job Description

• Lead and guide sub-contractor to achieve quality workmanship
• Handle paperworks , defects issuance and reporting
• Conduct defects investigation and identification

Requirement

• Minimum 4 years in CONQUAS
• Possess at least 2 good industry practices certificates
• Microsoft office knowledge
• Able to communicate with client and consultant

Did you know KONE moves over one billion people every day? We employ over 60,000 driven professionals in over 60 countries worldwide joined together by a shared vision. As a global leader in the elevator and escalator industry, it is our mission to improve the flow of urban life.

Why this role?

KONE Singapore is embarking upon an exciting growth phase and as such we are seeking Maintenance Technicians to join our team in Singapore.

You will work in a small group of technicians attending fault calls, completing escalator/elevator repairs and servicing an allocated maintenance run.

Being part of a global organisation that actively supports your career and internal promotions, means that for the right person, this critical role could be the next step in a fantastic career at KONE.

What will you be doing?

• Responsible for accurate and real-time back reporting of work performed to ensure accuracy of customer notification
• Responsible for maintaining excellent relationships with customers
• Perform maintenance, repairs and installation in collaboration with other Maintenance Technicians
• Manages daily workload with minimal assistance from Supervisor
• Effective communication with all stakeholders
• Ensure safety at all times
• Depending on seniority, you may be required to give training/coaching to persons nominated by the supervisor

Are you the one?

• Minimum Certificate in Electrical, Electronic or Mechanical Engineering
• Possesses a service mindset
• Able to work in a fast-paced environment

What do we offer?

• Career progression in opportunities within a global organisation
• Total reward elements that engage and motivate our employees and help us make KONE a great place to work
• Comprehensive learning and development programs covering a wide range of professional skills

Responsibilities:

• Conduct testing of equipment and systems
• Perform repair works on equipment and systems
• Monitor equipment and system condition
• Perform housekeeping of tools after maintenance and repairs
• Follow resourcing plans in support of engineering projects
• Operate equipment and systems in adherence to operational plans and Standard Operating Procedures (SOPs)
• Monitor equipment and systems performance
• Follow emergency response plans and relevant safety procedures
• Respond to emergencies as an emergency response team member
• Comply with the organisational Workplace Safety and Health (WSH) policies and Environmental Management Systems (EMS)
• Coordinate with contractors to ensure compliance with the organisational WSH and EMS standards and practices
• Report accidents and incidents in accordance with WSH and EMS standards and practices

Requirements:

• Higher NITEC/NITEC in Mechanical/Electrical Engineering/Building Services/Facility Technology or equivalent
• Minimum 1 year of relevant experience in building servicing and maintenance, preferably in hotel or serviced apartment environment
• Service-oriented
• Team player and able to work independently
• Willing to work on rotating shift, PH and weekends
• Fully vaccinated
• 5/6 days work week, 9 hours per day including 1 hour break

Responsibilities:

• Gardening works (i.e. watering plants and clearing debris in drains) at rooftops.
• Cleaning works in the building
• Repair works in the building
• Handing and taking over of tenants’ premises in the building.
• Fire Drill and Emergency Response Plan.
• Ad-hoc Beer Tech machine servicing
• Any other ad hoc works as requested by superior.

Requirements

• Minimum 1 year in facility/building maintenance.
• Excellent communication and interpersonal skills.
• Hardworking and able to multi-task
• Good safety mindset
• 6 days work week

Key Responsibilities :

o Perform routine and preventative maintenance tasks on industrial packaging machines and equipment;

o Carry out repairs, troubleshooting, and maintenance work on mechanical and electrical systems;

o Keep records of maintenance and repair work, including ensure spare parts inventory equipped at all times;

o Maintain a clean and organized work area, adhering to safety and efficiency standards;

o Ensure maintaining spare parts inventory levels and ensuring proper care and protection of maintenance tools and equipment;

o Assist Maintenance Chief to identify and implement continuous improvement initiatives;

o Obtain quotes from suppliers and internet purchases for comparison to achieve the most cost effective solutions while maintaining quality standards;

o Provide weekly updates on the status of ongoing maintenance tasks, servicing issues, and outstanding parts orders.

Requirements :

o Minimum 5 years of experience in maintenance, repair, and troubleshooting of industrial machinery, preferably in a beverage manufacturing environment;

o Diploma, NITEC, NTC-2, or ITC in Mechanical, Mechatronic, or Electrical Engineering;

o Competent in Microsoft Office preferred - outlook, excel, word, and CAD;

o Knowledge of industrial machinery, including packaging equipment, conveyor system, boiler, chiller, compressor and cooling tower etc;

o Familiarity with Electrical motors (AC/DC), Pneumatic and hydraulic systems, Valves and actuators, Pumps, Gearboxes and transmission systems, Sensor technologies (e.g., temperature, pressure, level, flow), Boiler and chiller systems, Water treatment systems, Packaging machinery and Material handling equipment.

Maintenance Technician

Responsibilities

• Servicing and repairing industrial cleaning equipment such as high-pressure jet, leaf blower, scrubbing machine, vacuum cleaner, battery operated cart and etc
• Inspecting and assessing the functionality of equipment
• Troubleshooting machineries breakdowns
• Conducting routine maintenance and safety checks
• Preparation and submission of maintenance reports
• Liaise with external vendors for necessary equipment repair
• Inspect and monitor quality standards of equipment / tools
• Perform asset tagging to ensure accountability of equipment
• Prepare inspection finding reports and communicate with internal staff / vendors on any faults, and follow up to ensure rectification
• Any ad-hoc assignments

Requirements

• Valid Singapore Class 3 Driving Licence
• Minimum 2 years of experience in similar capacity and relevant knowledge in electrical and mechanical.
• Good communication and organisational skills
• Basic computer and report writing skills.
• Good time management and planning skills
• Hands-On Physical work required
• Driving company lorry (manual)
• Working hours: 8am to 8pm (Monday to Saturday)

Maintenance Technician

Responsibilities

• Servicing and repairing industrial cleaning equipment such as high-pressure jet, leaf blower, scrubbing machine, vacuum cleaner, battery operated cart and etc
• Inspecting and assessing the functionality of equipment
• Troubleshooting machineries breakdowns
• Conducting routine maintenance and safety checks
• Preparation and submission of maintenance reports
• Liaise with external vendors for necessary equipment repair
• Inspect and monitor quality standards of equipment / tools
• Perform asset tagging to ensure accountability of equipment
• Prepare inspection finding reports and communicate with internal staff / vendors on any faults, and follow up to ensure rectification
• Any ad-hoc assignments

Requirements

• Valid Singapore Class 3 Driving Licence
• Minimum 2 years of experience in similar capacity and relevant knowledge in electrical and mechanical.
• Good communication and organisational skills
• Basic computer and report writing skills.
• Good time management and planning skills
• Hands-On Physical work required
• Driving company lorry (manual)
• Working hours: 8am to 8pm (Monday to Saturday)

Responsibilities:

• Provide general administrative support to Maintenance Department.
• Maintain records of maintenance activities in the appropriate logs.
• Support preparing documentation and reports.
• Assist in regular maintenance inspection and liaise with the vendor for the schedule arrangement.
• Perform other general administrative duties assigned by Superior.

Requirements:

• Superior organizational skills and multitasking abilities.
• Strong communication skills.
• Attention to the little details.
• Problem-solving skills.
• Basic qualification or sufficient experience as an Admin in Construction Sector.

Job Description

• Industry/ Organization Type: Manufacturing/ Production
• Position Title: Technical Officer (Service & Maintenance)
• Working Location: West (Jurong Port) – Nearest MRT: Lakeside
• Working Hours: 5.25 days, Monday to Friday (8.30 am – 5.30 pm), Every Alternate Saturday, (8.30 am – 12.30 pm)
• Salary Package: Up to $4000 + OT + Performance Bonus + AWS
• Duration: Permanent

Key Responsibilities

• Monitor, operate, and maintain cement plant machinery, including crushers, kilns, mills, and packing units, ensuring smooth and efficient production processes.
• Perform routine maintenance and troubleshooting of mechanical, electrical, and control systems to minimize downtime and ensure consistent plant operations.
• Continuously monitor equipment performance, identify potential issues, and take proactive steps to ensure optimal equipment efficiency and product quality.
• Ensure strict adherence to safety protocols, plant operating procedures, and environmental regulations. Report any incidents or hazards immediately.
• Work with process engineers and plant supervisors to optimize production processes and improve yield and energy efficiency.
• Assist in managing the inventory of spare parts, tools, and equipment to ensure readiness for any maintenance or repair jobs.
• Record, analyze, and report operational data, including machinery performance, production rates, and quality control results, to assist with performance reviews and decision-making.
• Work closely with cross-functional teams, including mechanical, electrical, and process engineers, to resolve technical issues and support plant improvements.

APPLY NOW!!!

• Min. ITE
• Min. 3 years experience in related fields (service and maintenance)

Kindly apply through ANY of the following methods:

• Submit your application by clicking the APPLY button;
• Email your resume to Job(at)anradus.com.sg. Kindly indicate #69905 on the email subject.

Anradus Application Policy: We value each application and ensure every resume is reviewed. Our process is efficient, typically concluding within 3 working days. If you do not receive communication from us within this timeframe, it's likely that your application has not been shortlisted by our client. In such cases, we recommend continuing your job search to maximize your opportunities.

Anradus Pte Ltd | EA License No. 20C0161 | Markus Tan | EA Reg No.: R24124040

Overview

As a Maintenance Engineer (Senior / Assistant), you are responsible for maintaining and repairing the heavy machinery, plant equipment, tools and systems used in the manufacturing, engineering and other industrial production processes. You are to ensure that all machineries and equipment are in good working conditions as and when are needed.

Responsibilities

1. Manage, oversee and lead the Maintenance team to ensure minimum downtime of Facility, Machinery and Equipment.
2. Strategize on maintenance regime, maintenance supplies, work instruction and methods.
3. Create plant preventative maintenance procedures and schedules.
4. Conduct routine inspections and periodic maintenance checks on machines to keep them running smoothly.
5. Plan equipment upgrading and machinery modifications for improvement or prolong efficiency.
6. Plan, order, replenish, inventory keeping of machinery parts.
7. Analyze gaps to ensure programmes meets customers’ and company requirements.
8. Analyze breakdowns, diagnose faults and supervise time critical equipment repairs.
9. Offer technical expertise and necessary in-house training to Maintenance team, Operations team (i.e.: supervisor, foreman, fitters, technicians, etc.) and others.
10. Manage budget for current and future equipment upgrades, replacements and maintenances.
11. Resource, coach, mentor and motivate direct reports to create a high performing team.
12. Ensure the cause of non-conformities are properly investigated and analyzed all corrective and preventive actions taken are effective.
13. Responsible for control of maintenance cost, procurement of new components for existing equipment, or replacing the entire set of machines after a prescribed period of usage is complete.
14. Ensure all ISO documentations relating to Maintenance of plant machineries are up-to-date.
15. Report to Production Manager and Top Management on the performance of the quality management system including opportunities for improvements.
16. Perform any other duties as assigned by the Management and/or the designated manager.

Requirements

1. Degree in Mechanical Engineering or equivalent, with a minimum 3 years of relevant work experience in maintenance in an automation / equipment manufacturing environment. OR
2. Higher NITEC in Mechanical Engineering or related / Professional Certificate / Diploma in Mechanical Engineering, with a minimum of 3 years of relevant work experience in maintenance in an automation / equipment manufacturing environment.
3. Able to multi-task, work independently, proactive with positive attitude.
4. Resilient, self-driven and analytical.
5. A strong problem solver with an eye for detail and an analytical mind.
6. Able to stand, stoop, squat and kneel for long periods of times, as well as lift, push and pull large machine parts or machines or machines as needed.
7. Proficient in Microsoft Word and Excel.
8. Familiar with various ISO / QMS standards such as ISO 9001, ISO 45001.
9. Able to work on weekends / public holidays when required.

The Job Responsibilities:

- Responsible for performing outdoor & indoor repair, maintenance and troubleshooting work

- Where there is no outdoor repair, you are required to work within the Company workshop

What It Takes:

· Degree/ Diploma/ Certificate in electrical & electronic engineering (AC & DC motors, single-phase & three-phase, lead acid & lithium batteries, electrical control circuits, hydraulic system)

· minimum a year of customer support experience

· ability to work as part of a team and possess strong communication skills

· obtained local driving license is a plus

Job Description

• Industry/ Organization Type: Marine Spare Parts & Machinery Supplier
• Position Title: Marine Service Engineer
• Working Location: West – Gul Circle
• Working Hours: 5.5 days (Mon-Fri: 8 am-6 pm, every Sat: 8 am-1 pm)
• Salary Package: Up to SGD 5000 + Bonus + On-site allowance
• Duration: Permanent

Key Responsibilities

• In-charge of repair / service sales division
• Main Engine & aux engine repair, pumps, compressors, purifier and hydraulic at shipyard, working anchorage, OPL, follow voyage, PSA & Jurong port (ship owner, ship manager / Shipyard – DDW Pax ocean, ST Marine, Keppel / Industry – sewage treatment, Jurong & Kranji / Spares & equipment supplier / Engineer solution)
• Prepare & submit repair /service quotation to customer
• Get quotation from repairer
• Co-ordinate and arrange internal and external service team
• Co-ordinate between customer, agent & vessel for dispatching our teams to go onboard vessel to carry out repair/servicing job and or pre-work inspection
• Follow up with customer on status of our offer
• Co-ordinate with repairer & customer for any claims, dispute or complaint on work done or supply
• Prepare & submit inspection / service report to customer in accordance with ISO requirement & standard, filing of report is part of the job scope as per requirement
• Update & submit, sales report - quotation, enquiry against actual sale statistic report by weekly, monthly & yearly
• Co-ordinate between the sales team & production / service team for reconditioning work of stock item
• Coard vessel to meet Capt / Chief engineer for service & spares sales call & inspection in due course
• Carry out risk assessment for each service and observe safe work practice and regulations onboard vessels & in the workshop is part of the job responsibilities

APPLY NOW!!!

• Min. ITE in Marine or Mechanical Engineering
• Min. 3 years of working experience in the Marine industry
• Must have Hands-on experience on 2 & 4 stroke engines, purifiers, pumps, and air compressors
• Those with sailing experience are welcome

Kindly apply through ANY of the following methods:

• Submit your application by clicking the APPLY button;
• Email your resume to Job(at)anradus.com.sg. Please indicate #66039 on the email subject.

Anradus Application Policy: We value each application and ensure every resume is reviewed. Our process is efficient, typically concluding within 3 working days. If you do not receive communication from us within this timeframe, it's likely that your application has not been shortlisted by our client. In such cases, we recommend continuing your job search to maximize your opportunities.

Anradus Pte Ltd | EA License No. 20C0161 | Celine Tan | EA Reg No.: R1873694

Position: Service Engineer (Product: Microscopes)
Location: Tai Seng, Singapore
Salary: $2,800 - $3,300, commensurate with experience and educational background
Additional Benefits: Monthly mobile and commuting allowance

Key Requirements:

• Education: Diploma in Engineering
• Experience: 1-2 years in field service, ideally in medical device servicing, with exposure to small, delicate parts
• License: Class 3 driving license preferred

Job Responsibilities:

• Visit clients’ sites to perform servicing and maintenance on microscopes
• Handle small microscope parts with care and precision

How to Apply: Send your resume to Jocelyn Chan at [email protected] or contact via Telegram @jocelynchan

Jocelyn Chan | Consultant | Recruit Express Pte Ltd (Healthcare & Lifescience) Company EA Licence Number: 99C4599 Personnel EA License: R1331820

Overview

As a Maintenance Engineer (Senior / Assistant), you are responsible for maintaining and repairing the heavy machinery, plant equipment, tools and systems used in the manufacturing, engineering and other industrial production processes. You are to ensure that all machineries and equipment are in good working conditions as and when are needed.

Responsibilities

1. Manage, oversee and lead the Maintenance team to ensure minimum downtime of Facility, Machinery and Equipment.
2. Strategize on maintenance regime, maintenance supplies, work instruction and methods.
3. Create plant preventative maintenance procedures and schedules.
4. Conduct routine inspections and periodic maintenance checks on machines to keep them running smoothly.
5. Plan equipment upgrading and machinery modifications for improvement or prolong efficiency.
6. Plan, order, replenish, inventory keeping of machinery parts.
7. Analyze gaps to ensure programmes meets customers’ and company requirements.
8. Analyze breakdowns, diagnose faults and supervise time critical equipment repairs.
9. Offer technical expertise and necessary in-house training to Maintenance team, Operations team (i.e.: supervisor, foreman, fitters, technicians, etc.) and others.
10. Manage budget for current and future equipment upgrades, replacements and maintenances.
11. Resource, coach, mentor and motivate direct reports to create a high performing team.
12. Ensure the cause of non-conformities are properly investigated and analyzed all corrective and preventive actions taken are effective.
13. Responsible for control of maintenance cost, procurement of new components for existing equipment, or replacing the entire set of machines after a prescribed period of usage is complete.
14. Ensure all ISO documentations relating to Maintenance of plant machineries are up-to-date.
15. Report to Production Manager and Top Management on the performance of the quality management system including opportunities for improvements.
16. Perform any other duties as assigned by the Management and/or the designated manager.

Requirements

1. Degree in Mechanical Engineering or equivalent, with a minimum 3 years of relevant work experience in maintenance in an automation / equipment manufacturing environment. OR
2. Higher NITEC in Mechanical Engineering or related / Professional Certificate / Diploma in Mechanical Engineering, with a minimum of 3 years of relevant work experience in maintenance in an automation / equipment manufacturing environment.
3. Able to multi-task, work independently, proactive with positive attitude.
4. Resilient, self-driven and analytical.
5. A strong problem solver with an eye for detail and an analytical mind.
6. Able to stand, stoop, squat and kneel for long periods of times, as well as lift, push and pull large machine parts or machines or machines as needed.
7. Proficient in Microsoft Word and Excel.
8. Familiar with various ISO / QMS standards such as ISO 9001, ISO 45001.
9. Able to work on weekends / public holidays when required.