Engineer

Job Summary

Our growing company in Fire Protection Systems is seeking to hire an Engineer for our ongoing and upcoming projects.

This task involves the installation of Fire Protection System, arrangement of team members to complete the installation in accordance to approved drawings and ensuring that project deadlines are met in a timely manner.

Job Descriptions:

· Installation of Fire Alarm System equipment.

Requirements:

Candidate must possess Engineering Degree or equivalent

Proficient in Microsoft Office

Minimum 2 years experience

Ability to work effectively both independently and as part of a team. Ability to read, understand and execute work according to drawings. Ability to work on tight deadlines.

Be involved in the planning of civil engineering works.

· To collaborate with peers in other disciplines in feasibility study and design, and ensure delivery of quality service for clients.

· Any ad-hoc duties as assigned by the Manager.

· The Civil Engineer shall supervise all civil, structural, and geotechnical building works, including structural elements for architectural work, building services, electrical and mechanical (M&E), and specialist engineering works for compliance with the PUB/LTA’s requirements and other authorities’ and agencies’ requirements for permanent works and temporary works.

Job Summary:

· The Civil Engineer assists the Construction Manager in performing engineering duties in planning, designing, and overseeing the construction and maintenance of current upcoming Civil projects.

· The Civil Engineer shall supervise all civil, structural, and geotechnical building works, including structural elements for architectural work, building services, electrical and mechanical (M&E), and specialist engineering works for compliance with the PUB/LTA’s requirements and other authorities’ and agencies’ requirements for permanent works and temporary works.

. Flexible working hours

He is to use his knowledge of solar technology, electrical engineering, and mechanical engineering to ensure that solar systems are working safely and efficiently.

Solar engineers may work in a variety of areas, including:

• Maintenance: Maintain solar systems
• Project development: Assess solar panel installations, review energy audits, and prepare specifications and configurations for solar energy solutions
• Installation: Provide technical direction or support to installation teams during installation, start-up, testing, system commissioning, or performance monitoring
• Troubleshooting: Troubleshoot any problems that may arise with solar systems
• Technical support: Provide technical support to clients and other professionals in the field

Roles & Responsibilities

The responsibility of this position is to lead the project assigned to successful completion within the project schedule & scope as well as obtain the targeted profit and achieve high customer satisfaction.

The incumbent shall carry out the following responsibilities, but not limited to:

• Resolve complex issues with clients & consultants, JV partners, and/or sub-contractors which are not able to be handled by subordinates.
• Direct project team members to achieve targets of safety, quality, profit and timely completion of the project. To monitor the progress of the project according to the targets set.
• Identify key staff to lead the project and delegate responsibilities. Provide guidance and direction to staff for them to work towards the targets set.
• Personnel management and development.
• Oversee the tender works including providing directions on planning, construction technique, quality of tender submission documents, risk and issue management, tender price negotiation with suppliers and subcons for finalization.

Requirements:

• Candidate must possess at least a Bachelor's Degree majored in Civil Engineering recognised
• Minimum 6 years of local experience in construction industry
• Experience in Road Works / Building Works Project will be preferred
• Proven working experience in project management
• Excellent client-facing and internal communication skills
• Independent and organised with positive work attitude
• Possess strong written
• Good decision maker and team player
• Auto Cad designing
• Class 4 with Forklift licence

• Responsible for all major mechanical and electrical and instrumentation equipment
• Lead a team of technical executives/technicians for troubleshooting works
• Manage the purchase of major supply and repair items alongside with supervision and execution of preventive and condition monitoring of major electrical equipment
• Handle hands-on preventive maintenance and breakdown maintenance work
• Coordination with clients and subcontractors to meet the site/project requirements
• Carry out rectification of faults within a specified time
• In-charge of troubleshooting of M&E system
• Responsible for planning, execution and supervision of all facilities management and operational activities
• Responsible for project cost control and service standards
• Any other ad hoc duties assigned

Job Requirements

• Degree or Diploma in Engineering.
• 3-5 years of relevant working experience
• Technical knowledge of M&E systems(including, but not limited to, fire protection systems, AV systems and ACMV systems) is an added advantage
• Able to perform shift work if required
• Preventive Maintenance Troubleshooting

Job Descriptions & Requirements

1. Technical Expertise and Leadership

Deep Technical Knowledge: Possesses a high level of expertise in semiconductor technologies, processes, or specific product areas. This includes understanding intricate details of semiconductor design, fabrication, testing, or applications.

Guidance and Mentoring: Provides guidance and mentorship to less experienced engineers and technical staff, helping them solve complex problems and develop their skills.

Advanced Problem Solving: Tackles the most challenging technical problems, often involving novel or complex issues that require in-depth analysis and innovative solutions.

2. Project Oversight and Innovation

Project Leadership: Leads high-impact projects or initiatives, ensuring that they align with the company’s technical and business goals. This includes overseeing project execution, managing risks, and ensuring quality outcomes.

Innovation: Drives innovation by researching new technologies, methodologies, or processes. Identifies opportunities for improvement and contributes to the development of cutting-edge solutions or products.

Technical Strategy: Contributes to the development of the company’s technical strategy and roadmap. Ensures that projects and initiatives align with long-term business objectives.

3. Collaboration and Communication

Cross-Functional Collaboration: Works closely with other departments, such as design, manufacturing, and quality assurance, to ensure seamless integration of technical solutions and processes.

Customer Interaction: Engages with customers to understand their needs and provide technical support or solutions. This can involve presenting technical information, addressing customer concerns, or customizing solutions for specific applications.

Technical Documentation: Creates and maintains detailed technical documentation, including design specifications, test plans, and reports. Ensures that all technical information is clear and accessible for stakeholders.

4. Process Improvement and Quality Assurance

Process Optimization: Analyzes and improves existing processes to enhance efficiency, reliability, and performance. Implements best practices and standards to ensure high-quality outcomes.

Quality Control: Ensures that products or solutions meet quality standards and regulatory requirements. Oversees the implementation of quality assurance processes and addresses any issues related to product performance or reliability.

5. Strategic Contributions

Technical Reviews: Participates in or leads technical reviews, including design reviews, feasibility studies, and project evaluations. Provides insights and recommendations based on technical expertise.

Strategic Planning: Assists in strategic planning by providing technical input on new product development, market trends, and technological advancements. Helps define the direction for future projects and initiatives.

A Service Engineer’s responsibilities typically include installing, maintaining, and repairing machinery and equipment, ensuring optimal performance and customer satisfaction.

Job Description :

1. Equipment Installation: Assist in the installation and setup of various equipment at client sites.

2. Routine Maintenance: Perform scheduled maintenance checks on machinery and equipment to ensure optimal performance.

3. Troubleshooting: Diagnose and resolve technical issues promptly to minimize downtime.

4. Customer Support: Provide technical support to customers, address and resolve customer inquiries and complaints in a timely manner.

5. Quality Assurance: Ensure compliance with company quality standards and regulatory requirements during service operations. Adhere to all health and safety regulations and ensure compliance with industry standards.

Job Requirements :

• Diploma or degree in Mechanical Engineering, Electrical Engineering, or a related field.
• Minimum of 5 years of experience in crane service engineering or a related field.
• Familiar with hydraulic system & machinery electric system and understanding the hydraulic system theory.
• Basic knowledge of diagnosing defects and repair mechanical equipment such as heavy crawler crane, excavator or drilling rig, etc

Roles & Responsibilities

• Ensure performance complies with specications, technical clarications, and drawings.
• To guide and supervise on works arrangement and site activity.
• To check all installation drawings and prepare relevant schedule.
• Monitor the daily progress of activities and prepare daily report of the status of each assignment.
• Managing project budgets. Able to work on weekend/public holiday.
• Able to work regularly under rooftop.
• Able to use Microsoft suite of Software including project.
• Prociency in AutoCAD is preferred.
• Good organizational skills and communication skills. Good technical competency.
• Carry out the electrical cabling works, tray & trunking works with installation.
• Experience in integration of the sites.
• Minimum Certicate requirement in Safety Supervisor.
• Candidates with a Diploma in Electrical and Electronics Engineering or above Minimum 10 years working experience on related sites

The Site Engineer will be managing different parts of construction projects, supervising crew members, preparing estimates for time and material costs, completing quality assurance, observing health and safety standards, and compiling reports for different stakeholders. The Site Engineer should be able to work alongside various professionals and create work schedules that meet deadlines. The Site Engineer should demonstrate strong analytical and logical thinking skills, display a superb work ethic and thrive under pressure.

Required experience in bored pile works, diaphragm wall and deep soil mixing.

• Organizing materials and ensuring sites are safe and clean.
• Preparing cost estimates and ensuring appropriate materials and tools are available.
• Providing technical advice and suggestions for improvement on particular projects.
• Diagnosing and troubleshooting equipment as required.
• Negotiating with suppliers and vendors to ensure the best contracts.
• Authorizing technical drawings and engineering plans.
• Drawing up work schedules and communicating any adjustments to crew members and clients.
• Gathering data, compiling reports, and delivering presentations to relevant stakeholders.
• Delegating tasks and scheduling meetings and training sessions where required.
• Completing quality assurance and providing feedback to the team.
• Act as the main technical adviser on a construction site for subcontractors, craftspeople and operatives.
• Set out, level and survey the site.
• Check plans, drawings and quantities for accuracy of calculations.
• Ensure that all materials used and work performed are in accordance with the specifications.
• Oversee the selection and requisition of materials.
• Agree a price for materials and make cost-effective solutions and proposals for the intended project.
• Manage, monitor and interpret the contract design documents supplied by the client or architect.
• Liaise with any consultants, subcontractors, supervisors, planners, quantity surveyors and the general workforce involved in the project.
• Liaise with the local authority (where appropriate to the project) to ensure compliance with local construction regulations and by-laws.
• Communicate with clients and their representatives (architects, engineers and surveyors), including attending regular meetings to keep them informed of progress.
• Carry out day-to-day management of the site, including supervising and monitoring the site labour force and the work of any subcontractors - this is site-specific and may not be the case on all projects.
• Day-to-day management of the site, including supervising and monitoring the site labour force and the work of any subcontractors.
• Plan the work and efficiently organise the plant and site facilities in order to meet agreed deadlines.
• Oversee quality control and health and safety matters on site.
• Prepare reports as required.
• Resolve any unexpected technical difficulties and other problems that may arise.

Objectives:

· Supporting refurbishment projects within the Domestic Business Management Division.

· Support and execute business expansion plan.

· Overseeing engineering processes, ensuring technical standards are met

· Collaborating with cross-functional teams to deliver projects in a timely and cost-effective manner.

· To support refurbishment projects and business operations in the Singapore region.

· Ensure project quality, and act as a bridge between Japanese headquarters and local teams, fostering seamless communication and collaboration.

Job Responsibility:

1. Project Support:

- Plan, execute, and monitor refurbishment projects within the Capital Area.

- Assist in the execution of key projects, ensuring alignment with Japanese business standards and practices.

- Monitor project progress and report updates to stakeholders, ensure schedules effectively.

2. Technical Expertise:

- Provide technical input on refurbishment designs, materials, and processes.

- Conduct feasibility studies and risk assessments for refurbishment projects.

- Ensure adherence to industry standards, regulations, and safety protocols.

3. Collaboration and Communication:

- Work closely with internal teams, including procurement, operations, safety and quality assurance.

- Prepare and present progress reports, technical documents, and proposals in English and Japanese.

- Strong in Business Japanese communication and written skills to communicate with executives in Japan regional offices.

4. Administrative Duties:

- Handle documentation, reporting, and correspondence related to assigned projects.

- Coordinate meetings, schedules, and travel arrangements as necessary.

- Ensure all activities adhere to local regulations and company policies.

Requirements:

- A bachelor’s degree in business administration, Engineering, or a related field is typically required.

- Minimum of 3 years of experience in a business or engineering-related role.

- Strong communication and interpersonal skills.

- Ability to manage multiple tasks and projects effectively.

- Proficiency in Microsoft Office Suite (Word, Excel, PowerPoint).

Job Responsibilities

· Able to plan, implement and monitor work schedules for all worksites

· Ability to source for suppliers / subcontractors for smooth operation on site

· Independent & able to resolve any technical difficulties & problems that may arise on site

· Assist the Project Manager in the daily coordination, planning, and execution of the project plan at the site.

· Liaison with the relevant parties involved in the project work.

· Prepare site program chart for management review regularly

· Other related duties assigned by the company from time to time

Requirements

· Diploma/Degree with 1-2 years of relevant experience in Building construction

· Experience in Civil Engineering related fields is added advantage

· Possess good communication skills for effective follow-up

· Attention to details

· Ability to interact with all levels in a professional & responsive manner display maturity and ability to handle stress

· Willingness to learn and progress

· Enthusiastic team player

Our client is an US MNC, one of the largest players in the life-science sector. Due to business needs, they are now recruiting for Field Service Engineer to be part of their team for ongoing transformation projects. They are located at Jurong East.

Job Requirement:

• Perform verification, calibration, and preventive maintenance (PMs) in accordance with in-house Metrology SOPs.
• Maintain calibration and qualification tools, ensuring timely upkeep.
• Coordinate with and oversee External Third-Party (3P) vendors for calibration, PMs, qualifications, and repairs.
• Ensure External 3P vendors meet Customer off-site and on-site qualifications prior to service execution.
• Respond promptly to ad-hoc service requests from Laboratory End Users, adhering to the agreed Service Level Agreement (SLA).
• Recommend appropriate inventory levels for critical equipment parts and tools to minimize downtime and aid budget planning.
• Accurately document and manage service records, training, and asset information in the in-house Asset Management system.
• Facilitate clear communication and coordination among customers, vendors, and internal teams to ensure smooth service delivery.

Qualifications and Criteria:

• Diploma or bachelor’s degree in Science or Engineering, ideally in Electrical or Mechanical Engineering.

Interested candidates who wish to apply for the advertised position, please click APPLY NOW or email an updated copy of your resume/cv.

We regret that only shortlisted candidate will be notified.

Email Address: [email protected]

Recruitpedia Ptd Ltd

EA License No: 19C9682
Reg No: R24122162 | LAI CHAI LI

Job Description:

• Conducts periodic servicing and maintenance of the fire protection systems at the customers’ facilities
• Sprinkler System, Hosereel System, Wet Chemical System, Gas Suppression System, Dry/Wet Risers and Fire Alarm System.
• Responds and manage to customer queries
• Identify and resolve technical issues and malfunctions in a timely manner
• Replacement of manual call point, detectors, fire alarm panel, Emergency and Exit lights.
• Troubleshooting of fire alarm panel and pump panel
• Keep accurate records of maintenance and repair work performed
• Respond to service calls and emergencies promptly
• Any ad hoc duties assigned by superior

Job Requirements:

• Experience / knowledge in Fire protection service and maintenance
• Diploma in Electrical/Mechanical discipline
• Able to converse in simple English

Responsibilities

· Responsible for installation, commissioning, maintenance, and repair of current installed base of XRD & XRF for APAC.

· Troubleshoot, diagnose customer problems, and coordinates appropriate corrective action directly.

· Conform always to Malvern Panalytical and customer’s safety, cleanliness, and working protocol policies to maintain a safe and clean work environment.

· Ensure that guidelines and standards of work expected by Malvern Panalytical are understood and met.

· Carry out preventative maintenance activities to installed base as per factory guidelines.

· Provide Service Support and basic training after installation.

· General Service administration activities and report submission.

· Responsible for proper spare part handling per internal procedures.

Requirements

· Diploma Electrical Engineering & Mechanical Engineering, Physics, or related education. Knowledge of Chemical Engineering, Chemistry, Chemical, Electronics, Mechanics preferred.

· 2~3 of experience in maintaining analytical instruments or semiconductor equipment is preferred.

· Able to travel both domestically and internationally on short notice.

To find out more about this opportunity, please contact Lionel Liew at [email protected].

We regret that only shortlisted candidates will be notified.

GMP Technologies (S) Pte Ltd | EA Licence: 11C3793 | EA Personnel: Lionel Liew | Registration No: R1330693

Additional Information:

• Mon to Fri (8am to 5pm)
• Transport provided from Jurong East MRT
• Chemical Manufacturing Plant
• New headcount for expansion

Responsibilities:

• Generate spare parts list for the equipment, reliability for critical spares, work with IT department to transfer the list into BOM list, ensure physical and SAP system count are tally.
• Drive and lead the spare parts management process with contractor resources.
• Knowledge of SAP for scheduling maintenance work activities.
• Work with stakeholders to ensure the work task to be planned, scheduled and performed.
• Coordinate and engage operations to ensure all job requests are clear & concise and maintenance work orders are prioritized.
• Carry out site checks & planning of work orders end to end process, maintenance activities into tasks with resources, parts/material, craft/manpower and sequences for optimal work execution.
• Planning of work orders issue to the relevant engineers/contractors for execution.
• Compliant with EHS standards and accountable for all assigned activities.
• Support the project in pre and commissioning activities such as verifying site check and witness commissioning activities.
• Responsible for material procurement and availability prior to execution of all maintenance works.
• Create and maintain EHS, corrective maintenance activities.
• Actively monitor the actual work execution in terms of cost, resource, schedule and update the equipment plans accordingly.
• Accountable for ensuring that preventive/corrective maintenance compliance and timely closure of work orders.
• Initiate EHS plans/job safety analysis for the planned work orders to ensure safe execution of work.
• Ensure maintenance plans are scheduled accordingly and executed before their due dates.
• Accountable to ensure no overdue of all prevention/correction work including the necessary materials procure and availability.
• Assist in budget planning based on past years cost trending and provide inputs to improve contract strategy.
• Contribute and participate actively in site reliability improvements.
• Use Computerized Maintenance Management System in compliance with the global maintenance and business processes.

Requirements:

• Degree/Diploma or equivalent preferably in Mechanical Engineering.
• At least 5-10 years relevant field experience as Plant Engineer preferably with Mechanical Engineering background.
• Experienced in chemical process plant preferred.
• Prior relevant knowledge in EHS, Risk Management, Plant Operations, Reliability, Process Technology, MOC Management, Budgeting and RCA
• Strong communication and written skills
• Prior work experience using SAP system is preferred.

Interested applicant, please submit your application now!

We regret that only shortlisted candidates will be notified.

EA License No.: 23C1461

EA Reg. No.: R24120207 (Soh Yan Cheng Andrew)

By submitting your personal information and/or resume, you are deemed to consent to CareerVisors Pte. Ltd. to collect, use and disclose your personal information and/or resume to prospective employers/companies for the purposes of employment.

Job Overview:

We are seeking a skilled and customer-focused After Sales Service Technician to join our team. This role involves providing technical support, repairs, and routine servicing for water heaters. The technician will ensure high-quality after-sales services to maintain customer satisfaction, troubleshoot and fix issues, and ensure the efficient operation of water heating systems.

Key Responsibilities:

• Installation & Servicing: Perform maintenance and repair of water heaters, including instant and storage heaters.
• Troubleshooting & Diagnostics: Diagnose faults and perform repairs on faulty water heaters, ensuring safe and efficient operation.
• Customer Interaction: Provide excellent customer service, addressing customer queries and concerns professionally, and keeping them informed throughout the service process.
• Record Keeping: Maintain accurate service records, including service requests, actions taken, and equipment replaced.
• Compliance & Safety: Adhere to all safety protocols, local regulations, and company policies during installations, repairs, and maintenance.
• Customer Education: Educate customers on water heater maintenance and safe operation practices, offering advice on extending the lifespan of their equipment.
• Inventory Management: Maintain a stock of necessary parts and tools, ensuring availability of common replacement components for efficient servicing.

New Concept Opening at Amoy Street!!!

A new Filipino restaurant in Singapore which is a spin-off of popular Philippines-based concept, Manam. Rated and recommended by top food and travel sites such as Eater, Forbes Travel Guide, and Tatler Dining. With its approach of serving Filipino fare in classics and twists, the Manam dining experience is fit for this generation of curious eaters.

We are looking for passionate individual's to join us on this incredible journey!

Job Summary

This role plays a part in providing excellent service and creating amazing dining experiences for all our dining guests.

Duties and Responsibilities

▪ Play a part in providing high standards of service and creating amazing dining experiences for our guests

▪ Prepare the restaurant for service - table settings, top-up of condiments / service stations, and other preparatory tasks.

▪ Greet and welcome customers in a friendly manner.

▪ Be well-versed in the restaurant’s menu.

▪ Assist guests with the menu and provide recommendations.

▪ Serve guests with their food and beverage orders

▪ Be able to anticipate guest’s needs and preferences and render timely service.

▪ Clear and clean tables after guests have finished dining.

▪ Carry out daily general cleaning duties which includes, but are not limited to,

- Sweeping and mopping of floors

- Tidying up of service stations

- Trash disposal

- Washing and cleaning of serve/glass ware

▪ Execute initiatives set to make sure dining space is clean and tidy, exceeding expectations set under the Government and Company’s food safety and hygiene standards.

▪ Be responsive to telephone enquiries and forward to the relevant person if need be.

▪ Participate in promoting a cooperative, and happy working environment

▪ Any other duties as assigned by the Outlet Manager.

Requirements

- With some relevant F&B service experience. Training will be provided.

- Confidence, excellent customer service, and hospitality skills

- Friendly and Courteous

- Good communication and interpersonal skills

- Well verse in English

- Team player with a positive can-do attitude

- Attention to detail and able to adapt to any situations

- Problem analysis and problem-solving

Working Hours

5 Working days per week (Monday and Sunday Off)

Salary Package:

We offer competitive compensation (based on experience and position) and benefits packages for full-time employment.

Range from basic Salary $2000 to Gross Salary of $2600/$2700

Benefits

- Statutory leaves

- Outpatient & dental claim

- Hospitalisation & Surgical Insurance Coverage

- Training Opportunities

- Career Advancement

about the company

My client is a leading semiconductor equipment manufacturer with an outstanding international reputation in its field and a great emphasis on training & development. With more than 20 years history, this is a great brand to join at an exicting time in their development.

about the job

• Carry out on-site or remote support activities and close service calls
• Support system warranty standby
• Install a highly automated high vacuum CVD/PVD systems in a cleanroom environment
• Carry out quality installation, Preventive Maintenance (PM) according to schedule
• Participate and manage the new product release process as required
• Initiate, identify and participate in internal processes re-engineering projects
• Make timely reporting of issues and problems

skills & experience required

• Bachelor’s degree / Diploma in electrical / electronics / mechanical engineering or equivalent
• Min 1 year / intern experience in installation & troubleshooting of equipment in a cleanroom environment
• Understand / hands on with ALD / CVD / PVD systems/ sputtering / semiconductor / capital equipment
• Ability to build and maintain good relationship with customers
• Familiar with high complexity low volume environment
• Customer-oriented mentality and excellent client servicing skills
• Willing to work in north area of Singapore (Yishun / Woodlands / Sembawang)
• Training given to candidate with no experience

If you are interested in the position , kindly send your CVs in to yitwei.kwan(@)randstad.com.sg
Please include your availability, expected salary and reason for leaving current job
We regret that only shortlisted candidates will be contacted
EA: 94C3609 / Reg: R1325913

Our client is from Oil and Gas industry. They are looking for a Senior Mechanical Engineer for the next phase of their business. They are located in West.

Duties:

• Responsible in guiding the maintenance, troubleshooting, repair, commissioning and substitute of mechanical or piping equipment within the Gas Engine Generators as well as its additional systems such as gas engine, pipeline, pressure pipe, ACMVs, lube oil and coolant pumps arrangement.
• Responsible in supporting mechanical support and solutions for the process & care and providing the development of care strategy including procedure/specification focusing on equipment dependability, spares inventory necessity, shutdown and inspection lists, preventive and prophetic care programmed.
• Responsible in managing and work meticulously with internal contractor and equipment seller to perform maintenance work at the Gas Engine Generators Building and terminal.
• Responsible to make certain compliance to appropriate regulations, manipulate safely, fit for object, maintainable and trustworthy for the site’s modified or anew build mechanical setup (such as gas engine, pumps, gravity vessel, safety facilities, etc).
• Responsible in guiding technical negotiations, execute and succeed project schedules or cost as well as collaboration with outward and internal shareholders, merchants for end of life and development project using company Management of Change process for machinery facilities.
• Responsible in supplying technical practicing as required in the area of process, maintenance, fault resolution of the Gas Engine Generators.
• Responsible in contacting with exterior investor including administration agencies on approbation and risk of closure of electrical arrangement that will influence gas-send out.

Requirements

• Min Bachelor’s Degree in Mechanical Engineering or any relevant field.
• Min 3 to 5 years’ experience in relevant industry for maintenance of rotary and staticequipment is needed
• Prior experience in different types of gas/diesel machine knowledges is a bonus.

Interested candidates who wish to apply for the advertised position, please click APPLY NOW or email an updated copy of your resume/cv.

We regret that only shortlisted candidate will be notified.

Email Address: [email protected]

Recruitpedia Pte. Ltd.

EA License No: 19C9682

EA Personnel No: R2198636 (Oh Puey Xin)

Responsibilities

Restaurant Operations

o Execute assigned area of responsibility (e.g. greeter, runner, bartender, cashier) based on SOP

o Set up restaurant for service day, which include but not limiting to checking on availability of food item and special menu, guest reservation status, service area set-up, cash register and payment machines

o Provide service to customers

o Execute proper cash management

o Preparation and serving of all drinks, beverages and dessert items

Restaurant Management & Planning

o Address customers’ complaints in accordance to guidelines and to escalate issues to supervisors when necessary

o Identify and report all potential problems and to provide recommendations pertaining to the provision of services, food quality and cleanliness

Quality Assurance & Control

o Comply with SOP and safety requirements

o Ensure quality of food is up to the prescribed standard

o Ensure safety and hygiene standards are maintained by inspecting and cleaning of all utensils and restaurant area

o Identify and report unsafe and/or non-compliant conditions and behaviors pertaining to personal and food safety

People Management

o Perform as a reliable team member and communicate clearly and audibly.

About this role

To report to project manager for the M&E facilities maintenance projects

Job cope

Tender

To prepare tender for M&E facilities maintenance project

Pre project

Develops project objectives by understanding project requirement.

To plan project phases and manpower allocation.

To Determines project specifications by understanding customer technical and non-technical requirements and mandatory performance standards.

To prepare estimated project costing.

Project implementation

To understand project plan and specifications, time requirements n another project element and prepare project schedule

To monitor project progress

To Controls project plan by ad hoc review

To Controls project costs

To report to project director of project status reports by summarizing key information and recommend actions.

Requirement

· Diploma in M&E Engineering or equivalent.

· 3 relevant experiences in M&E works.

· 3 years M&E facilities operation project in large commercial building or education institution Construction industry

· 3 years M&E project management

Work location :Paya Labar

Whats on offer

(1) Attractive package

(2) Stable Management

(3) Dynamic work environment

For better response, pls apply via job page

https://recruitmentalliance.zohorecruit.com/jobs/Careers

click job opening, click relevant position

We regret that only shortlisted candidates will be notified

Our client is a global MNC in Industrial Waste Management industry. They are looking for a Mechanical Maintenance Supervisor for the next phase of their business. They are located in West.

Duties Mechanical Maintenance Supervisor:

• Collaborate with the commissioning team to inspect, test, and repair equipment as needed.
• Support maintenance work planning and scheduling alongside the engineer.
• Assign and track individual tasks, ensuring timely and high-quality completion.
• Maintain adequate inventory of tools, supplies, and parts for effective equipment repairs.
• Perform mechanical fitting tasks, including alignment, grinding and cutting.
• Servicing, repairing, and overhauling equipment such as pumps and blowers when required.

Requirements

• Diploma in Mechanical Engineering or related field
• Min 3 - 5 years’ maintenance experience in similar industries such as Water Treament, Chemical and Oil & Gas

Interested candidates who wish to apply for the advertised position, please click APPLY NOW or email an updated copy of your resume/cv.

We regret that only shortlisted candidate will be notified.

Email Address: [email protected]

Recruitpedia Pte. Ltd.
EA License No. 19C9682
EA Reg. No. R22108850 (Chan Mun Mun)

Hotel Maintenance

• Location: Beach Rd
• Working days : 6 days ; 8 hours/day
• Salary : $2000 - $3000 (depend on experience)

Responsibilities & Duties :

• Perform general maintenance and repairs on plumbing, electrical.
• Ensure guest rooms are well-maintained, including fixing plumbing, electrical, and furniture issues.
• Conduct regular inspections of hotel facilities to identify potential maintenance problems.
• Respond to emergency repair needs (e.g., burst pipes, electrical outages, power trip, water heater malfunction,promptly.
• Maintain the hotel’s exterior, including landscaping, parking lots, and outdoor lighting.
• Ensure all safety and security systems, including fire alarms, extinguishers, and emergency lights, are functioning.
• Work closely with housekeeping and management to address and resolve maintenance issues.
• Ensure compliance with safety, health, and environmental regulations.
• Maintain an inventory of maintenance supplies and tools.

Requirements:

• Proven experience in hotel or building maintenance .
• Basic knowledge of safety and fire regulations.

Lee Wan Ling | Reg No: R23116154

THE SUPREME HR ADVISORY PTE LTD | EA No: 14C7279

Our client is a global MNC in Industrial Waste Management industry. They are looking for a Mechanical Maintenance Supervisor for the next phase of their business. They are located in West.

Duties Mechanical Maintenance Supervisor:

• Collaborate with the commissioning team to inspect, test, and repair equipment as needed.
• Support maintenance work planning and scheduling alongside the engineer.
• Assign and track individual tasks, ensuring timely and high-quality completion.
• Maintain adequate inventory of tools, supplies, and parts for effective equipment repairs.
• Perform mechanical fitting tasks, including alignment, grinding and cutting.
• Servicing, repairing, and overhauling equipment such as pumps and blowers when required.

Requirements

• Diploma in Mechanical Engineering or related field
• Min 3 - 5 years’ maintenance experience in similar industries such as Water Treament, Chemical and Oil & Gas

Interested candidates who wish to apply for the advertised position, please click APPLY NOW or email an updated copy of your resume/cv.

We regret that only shortlisted candidate will be notified.

Email Address: [email protected]

Recruitpedia Pte. Ltd.
EA License No. 19C9682
EA Reg. No. R22108850 (Chan Mun Mun)