Our client is from Oil and Gas industry. They are looking for a Senior Mechanical Engineer for the next phase of their business. They are located in West.

Duties:

• Responsible in guiding the maintenance, troubleshooting, repair, commissioning and substitute of mechanical or piping equipment within the Gas Engine Generators as well as its additional systems such as gas engine, pipeline, pressure pipe, ACMVs, lube oil and coolant pumps arrangement.
• Responsible in supporting mechanical support and solutions for the process & care and providing the development of care strategy including procedure/specification focusing on equipment dependability, spares inventory necessity, shutdown and inspection lists, preventive and prophetic care programmed.
• Responsible in managing and work meticulously with internal contractor and equipment seller to perform maintenance work at the Gas Engine Generators Building and terminal.
• Responsible to make certain compliance to appropriate regulations, manipulate safely, fit for object, maintainable and trustworthy for the site’s modified or anew build mechanical setup (such as gas engine, pumps, gravity vessel, safety facilities, etc).
• Responsible in guiding technical negotiations, execute and succeed project schedules or cost as well as collaboration with outward and internal shareholders, merchants for end of life and development project using company Management of Change process for machinery facilities.
• Responsible in supplying technical practicing as required in the area of process, maintenance, fault resolution of the Gas Engine Generators.
• Responsible in contacting with exterior investor including administration agencies on approbation and risk of closure of electrical arrangement that will influence gas-send out.

Requirements

• Min Bachelor’s Degree in Mechanical Engineering or any relevant field.
• Min 3 to 5 years’ experience in relevant industry for maintenance of rotary and staticequipment is needed
• Prior experience in different types of gas/diesel machine knowledges is a bonus.

Interested candidates who wish to apply for the advertised position, please click APPLY NOW or email an updated copy of your resume/cv.

We regret that only shortlisted candidate will be notified.

Email Address: [email protected]

Recruitpedia Pte. Ltd.

EA License No: 19C9682

EA Personnel No: R2198636 (Oh Puey Xin)

Job Overview:

Responsible for troubleshooting and maintaining machinery, both mechanically and electrically.

Responsibilities:

• Responsible for troubleshooting, repairing, servicing and maintaining machinery, equipment, systems both mechanically and electrically.
• Ability to perform preventive and predictive technical preventive maintenance is necessary.
• Maintain a proper machinery asset register to keep track of asset holdings.
• To monitor and control maintenance costs, track the costs of labor, supplies, and equipment repairs.
• Ensure unplanned problems, breakdowns and emergencies are dealt with immediately and their root causes are determined.
• Work to maintain a safe and clean working environment by complying with procedures, rules, and regulations.
• Contribute to team effort by accomplishing related results as needed; complete tasks in a timely manner.
• Liaise with OEM, external vendor and operation executives on equipment repair status.
• Adhere to EHS compliance.

Requirements:

• Minimum ITE Higher NITEC/NTC2 in Electrical/Electronics/Mechanical/Mechatronics Engineering, with at least 2 years of relevant experience.
• Hands-on mechanical and electrical repair and troubleshooting experience is a must.
• Must have class 3 driving license.
• Basic computer skills such as use of Excel, Words and other Microsoft Office tools.
• Preferably able to read and understand electrical diagrams and mechanical drawings.

Reporting to the Technical Officer and Senior Maintenance Supervisor, this role is responsible for preserving the good condition and functionality of the school premise. This includes maintenance and repair of electrical, plumbing, ventilation works and other building systems.

Responsibilities:

• Survey buildings and repair mechanical systems to ensure consistency with health and safety standards.
• Check work orders via the ticketing system daily and take on assigned work activities accordingly. This includes setting up and tearing down of events location.
• Ensure scheduled inspections, maintenance and repair work are conducted regularly and properly recorded. This includes the buildings (e.g. landscaping, painting, carpentry, pest control etc), equipments, electrical systems (e.g. replacing light bulbs/sockets, cleaning and repairing circuit breaker panels etc), alarm systems (e.g. fire and protection), plumbing systems and manual repairs (e.g. fixing of locks, replacing of windows etc).
• Maintain the air conditioning and plumbing systems to ensure functionality.
• Ensure emergency repairs are attended to promptly and efficiently.
• Maintain the inventory (e.g. tools and materials) in a tidy and appropriate manner.
• Undertake any other duties as assigned by the Senior Maintenance Supervisor and/or Technical Officer.

Requirements:

• Nitec in Engineering or equivalent
• Minimum 2 years’ experience working in maintenance
• Good knowledge in general maintenance processes and methods
• Basic understanding of electrical, hydraulic and other systems
• Able to carry load of up to 25kg.

Please note that only shortlisted candidates will be contacted.

Our company is currently looking for Maintenance Technician(s) to be station in Changi Airport. The successful candidate will be responsible for the operation and maintenance of the Passenger Boarding Bridges (PBB).

Job responsibilities:

· Carry-out routine preventive maintenance as per standard operation procedure for Passenger Boarding Bridge.

· Respond to emergencies, break-downs and malfunctions of Passenger Boarding Bridge.

· Perform trouble shooting and equipment failure check.

· Conduct visual check on all hardware of Passenger Boarding Bridge after maintenance services.

· Update and maintain spare parts inventory to ensure that necessary components are readily available for repairs and maintenance.

· Record all faulty arise and maintain proper maintenance records.

· Strict adherence to safety rules and regulations

· Any other task as assigned by immediate supervisor/management.

We regret to inform that only short-listed candidates will be notified.

Requirements:

· Min NITEC in Engineering / Electrical / Mechanical / Automotive / Air-Conditioning / related fields

· Min 2 years relevant working experience

· Strong hands-on technical skills

· Proactive attitude

Other Information:

· Location: Changi Airport

· Working hours: 5 days

· Permanent position

· Supervisor position available for candidates with more experience

Responsible for day to day facility operations which include maintaining uptime and operations of air-conditioning systems, carry out building maintenance, servicing and trouble-shooting.

Ensure all facilities service are smooth and uninterrupted at all time.

Co-ordinate and follow up with WSH Officer and Safety Manager on all statutory requirements.

Requirements:

Secondary Education or Diploma or NITEC certificate (Electrical certificate) with minimum 2 year’s relevant working experience

Good Pay + Good allowance + Good Bonus

Interested candidates please send an updated Resume / CV in Ms Word format to WhatsApp’s your resume to 98332779 ( no Calls)

Consultant in-charge : Quah Li Lian (Lilian) ( Registration No: R1983286 )

Responsible for day to day facility operations which include maintaining uptime and operations of air-conditioning systems, carry out building maintenance, servicing and trouble-shooting.

Ensure all facilities service are smooth and uninterrupted at all time.

Co-ordinate and follow up with WSH Officer and Safety Manager on all statutory requirements.

Requirements:

Secondary Education or Diploma or NITEC certificate (Electrical certificate) with minimum 2 year’s relevant working experience

Good Pay + Good allowance + Good Bonus

Interested candidates please send an updated Resume / CV in Ms Word format to WhatsApp’s your resume to 98332779 ( no Calls)

Consultant in-charge : Quah Li Lian (Lilian) ( Registration No: R1983286 )

Responsible for day to day facility operations which include maintaining uptime and operations of air-conditioning systems, carry out building maintenance, servicing and trouble-shooting.

Ensure all facilities service are smooth and uninterrupted at all time.

Co-ordinate and follow up with WSH Officer and Safety Manager on all statutory requirements.

Requirements:

Secondary Education or Diploma or NITEC certificate (Electrical certificate) with minimum 2 year’s relevant working experience

Good Pay + Good allowance + Good Bonus

Interested candidates please send an updated Resume / CV in Ms Word format to WhatsApp’s your resume to 98332779 ( no Calls)

Consultant in-charge : Quah Li Lian (Lilian) ( Registration No: R1983286 )

Job Scope:

• Perform routine maintenance and troubleshooting of chiller systems to ensure optimal performance and efficiency.
• Provide exceptional customer service by addressing client inquiries and concerns regarding chiller operations and maintenance.
• Diagnose mechanical, electrical, and control system issues and implement effective solutions.
• Educate clients on proper operation and maintenance practices to extend the lifespan of their chiller systems.
• Prepare and submit detailed reports outlining service activities, findings, and recommendations for future improvements.
• Execute commissioning processes for new chiller installations, ensuring systems are installed correctly and functioning as designed.
• Other ad hoc duties assigned

Job Requirement:

• Min Diploma / Degree in Engineering
• Min 2 Years experience in chiller maintenance, commissioning, or related HVAC roles

All interested applicants, please send in your resume to: [email protected]

Wendy Khoo Hui Wen (R1761665)

Recruit Express Pte Ltd | Company Reg. No. 199601303W | EA License Number: 99C4599

Service Engineer (Semiconductor)

• 5 days, 9am- 6pm, may need to support short term night work
• Salary: $2700- $3800
• Address: Woodlands

Interested applicants can send your resume to ✉ [email protected] or WhatsApp: +65 94283063 and allow our Consultants to match you with our Clients. No Charges will be incurred by Candidates for any service rendered.

Job scope:

• Perform equipment on-site installation, diagnosing, troubleshooting, servicing, and repairing
• Perform equipment continuous improvement programmes, preventive maintenance, modifications and repairing works
• Serves as company contact point with customer on technical matters
• Attends to customers complaints and provides timely solutions
• Other ad hoc duties

Requirements:

• Diploma/ Degree in Mechanical/ Mechatronic Engineering or related discipline
• Experience in semiconductor industry is required
• Prior experience in cleanroom fabrication is a must

Leo Shin Guan Reg No: R22108030

The Supreme HR Advisory Pte Ltd EA No: 14C7279

Wärtsilä is a world leader in marine technology and leading the industry's transformation towards a decarbonised and sustainable future. With the world’s widest portfolio and service network, we – Wärtsilians - deliver efficient, safe and sustainable integrated products and solutions to enhance the business of our customers. The opportunities presented through digitalisation and new technologies are offering a new era of shipping. Did you know that shipping is the world’s most efficient mode of transportation and that approximately 90% of world trade is carried by sea?

We want to change the course towards an interconnected and cleaner maritime future and are constantly on the lookout for future-oriented talent to join our team and to work towards enabling sustainable societies through innovation in technology and services - together. Are you ready to jump onboard?

We are now looking for a Service Engineer to strengthen the Field Service Resource team in Singapore. This position requires travelling to locations in and around South East Asia – approximately 50- 100 travel days a year.

This is a permanent opportunity, and its location is Pandan Cresent, Singapore.

What will you be doing as Service Engineer?

Your work will focus on these responsibilities:

• Perform Field Service activities according to the work plan.
• Perform overhauls and repairs on assemblies on site and/or in workshops.
• Interact professionally with customers during the work execution.
• Perform internal and external progress status of the assigned work.
• Create the Service Work Reports.
• Ensure that the work is executed according to QSHE guidelines and site procedures and policies
• Follow-up and report on the status of work orders to customer and/or internal stakeholders.
• Continuously seek for solutions in according to best practices.

To be successful in this role, we expect you to have:

• Mechanical knowledge in propulsion equipment
• Self-motivated, analytical & fault-finding skills
• Mature, hardworking, have good anticipation with a problem-solving attitude
• A team player with a positive mindset & ability to adapt / work in a challenging environment
• Good written & communication skill
• Diploma or NITEC in Mechanical Engineering
• At least 2 year working experience in related field

At Wärtsilä we value, respect and embrace all our differences, and are committed to diversity, inclusion and equal employment opportunities; everyone can be their true self and succeed based on their job-relevant merits and abilities.

This is Wärtsilä

Wärtsilä is a global leader in innovative technologies and lifecycle solutions for the marine and energy markets. Our team of 17,800 professionals, in more than 280 locations in 79 countries, shape the decarbonisation transformation of our industries across the globe. Read more on www.wartsila.com.

My client is one of the world’s largest manufacturers of air conditioning equipment and the only integrated air conditioning manufacturer in the world.

• Permanent Position : Service Engineer
• Salary: Attractive Remuneration + VB (2-3 months) + Transport Package
• Location: (Based on project site)
• Working Hours: Office, Monday to Friday

The role of the Service Engineer is responsible for the installation, maintenance, and repair of HVAC/AHU/Air Conditioning systems.

Responsibilities:

• Attend to customer enquiries and complaints, including on-site calls
• Recommend preventive measures and provide prompt and effective resolution to technical problems
• Assuage dissatisfied customers with prompt resolutions for any product or service issues
• Provide guidance and technical assistance to service teams and sub-contractors on service assignments, testing and commissioning; verify and prepare payment to sub-contractors
• Remain actively involved in the implementation of department strategies and initiatives such as service value-chain businesses
• Update Service information system and follow up with all necessary paperwork diligently, timely and accurately for smooth operation of the department

Requirements:

• Diploma/Degree in Mechanical Engineering
• Minimum 2 years of technical experience with knowledge in air-conditioning, chiller, ACMV or HVAC systems
• Possess Class 3 driving license will be an added advantage

Next Step:
• Interested applicants may email your resume to [email protected] with your latest updated resume
• Only shortlisted candidates will be contacted

EA License No. – 23C2060 |EA Registration No. - R2092390

Job Scope:

• Perform routine maintenance and troubleshooting of chiller systems to ensure optimal performance and efficiency.
• Provide exceptional customer service by addressing client inquiries and concerns regarding chiller operations and maintenance.
• Diagnose mechanical, electrical, and control system issues and implement effective solutions.
• Educate clients on proper operation and maintenance practices to extend the lifespan of their chiller systems.
• Prepare and submit detailed reports outlining service activities, findings, and recommendations for future improvements.
• Execute commissioning processes for new chiller installations, ensuring systems are installed correctly and functioning as designed.
• Other ad hoc duties assigned

Job Requirement:

• Min Diploma / Degree in Engineering
• Min 2 Years experience in chiller maintenance, commissioning, or related HVAC roles

All interested applicants, please send in your resume to: [email protected]

Wendy Khoo Hui Wen (R1761665)

Recruit Express Pte Ltd | Company Reg. No. 199601303W | EA License Number: 99C4599

Responsibilities

• Installing and configuring computer hardware, software, systems, networks, printers and scanners

• Investigating, diagnosing and solving computer software and hardware faults

• Repairing equipment and replacing parts

• Managing inventory records of hardware, equipment, software

• Managing stocks of equipment, consumables and other supplies

• Trouble shooting PC Hardware, Notebook, PDA, Printer/Print Server, MS Win 2K-Vista, Internet Browser, Standard Microsoft, Lotus Notes Client and other in-house application problems.

Requirements

• Degree / Diploma in Electronics / IT or equivalent.

• Have 1 -2 yeas of relevant experience in supporting PC/Network Hardware, Network, Printer

• Field Engineers are expected to be able to interact well with users and work co-operatively with IT colleagues in other disciplines to successfully support end-users.

Licence no: 12C6060

Job Overview:

The Building Maintenance Handyman is responsible for performing various general maintenance tasks to ensure the smooth functioning of the building’s systems and infrastructure. The role includes troubleshooting, repairing, and maintaining the physical condition of the property, addressing maintenance issues as they arise, and performing preventive maintenance to minimize downtime and ensure the safety and comfort of building occupants.

Key Responsibilities:

• General Maintenance: Perform basic repairs and maintenance work for plumbing, electrical, HVAC, carpentry, painting, and general building upkeep.
• Troubleshooting & Repair: Diagnose and fix issues related to doors, windows, light fixtures, plumbing, heating/cooling systems, locks, and other building systems.
• Preventive Maintenance: Conduct routine inspections of building facilities, equipment, and systems to identify and address potential issues before they become significant problems.
• Safety & Compliance: Ensure that all work complies with safety standards, building codes, and legal requirements. Maintain a clean and safe work environment.
• Emergency Repairs: Respond to emergency maintenance requests and prioritize repairs to minimize disruptions to building operations and occupancy.
• Inventory & Supplies: Monitor and manage inventory of maintenance tools, parts, and supplies. Order supplies as needed to ensure adequate stock.
• Collaboration: Work closely with building management and other maintenance staff to coordinate maintenance schedules, improve building systems, and address tenant concerns.
• Documentation: Keep records of maintenance work, repairs performed, and parts used for tracking purposes. Provide regular reports to management on building status and repairs.
• Special Projects: Assist in larger-scale maintenance or renovation projects as needed, following proper protocols and safety measures.

Requirements:

• Experience: Proven experience as a maintenance worker or handyman in a commercial or residential building environment.
• Technical Skills: Knowledge of building systems, including HVAC, electrical, plumbing, and mechanical systems. Ability to handle a wide range of general maintenance tasks.
• Problem-Solving Skills: Strong diagnostic and problem-solving abilities. Ability to troubleshoot and resolve issues effectively and efficiently.
• Physical Stamina: Ability to perform physical labor, including lifting, bending, standing for extended periods, and working with various tools and equipment.
• Safety Awareness: Knowledge of safe work practices and the ability to work with a variety of tools and equipment in a safe manner.
• Communication Skills: Good verbal and written communication skills to interact with building management, tenants, and contractors.
• Certifications (Preferred): Relevant certifications (e.g., HVAC, electrical, plumbing) are a plus but not required.
• Availability: Ability to work flexible hours, including evenings and weekends, in case of emergencies.

Physical Demands:

• Work in various weather conditions, including outdoor tasks during.
• Ability to climb ladders, work in confined spaces, and perform tasks at heights.

Work Environment:

• The position requires working in a variety of environments, including commercial, residential, or industrial buildings.
• May involve exposure to hazardous materials or chemicals (with safety precautions).

Job Description & Requirements

1. Onboard vessel coordination, commissioning, Service, modification and troubleshooting of Cathelco products (MGPS and ICCP systems).

2. Routine Maintenance tasks e.g., On-board Site Surveys, Technical Audits, System Health Checks, Spares Management and Service Report.

3. Ensure service / commissioning work is always completed safely and efficiently.

4. Ensure service / commissioning reports are completed fully and to a good standard on completion of each order and get signed from owner / yard.

5. Discuss and recommend technical solutions with Customer and Project Manager.

6. Commissioning vessels at Singapore / Overseas Major Shipyard.

7. Responding to Technical queries from Shipyard and customers within a given timeline.

8. Ensure that the product support related to areas of the complaints and the warranty system is properly managed with records maintained.

9. Oversee the installation of the systems or equipment.

10. Maintain close working relationship with our key customers to ensure the follow through until the issue is resolved.

11. Investigates root causes of failures and recommend solutions.

12. To deal with customer on the warranty issues from technical aspect.

13. Performs any other service and training duties as and when assigned.

Qualification/ Requirement:

1. Diploma in Engineering (Marine/ Mechanical / Electrical)

2. At least 3 years of working experience in marine related

3. Independent with team-oriented spirit

4. Ability to read mechanical / electrical system drawing.

5. Good communication and analytical skills.

6. Good report writing skills.

7. Prepare to travel overseas for commissioning / service works.

8. Understanding and ability to use Microsoft office, specifically MS word and excel.

Responsible for day to day facility operations which include maintaining uptime and operations of air-conditioning systems, carry out building maintenance, servicing and trouble-shooting.

Ensure all facilities service are smooth and uninterrupted at all time.

Co-ordinate and follow up with WSH Officer and Safety Manager on all statutory requirements.

Requirements:

Secondary Education or Diploma or NITEC certificate (Electrical certificate) with minimum 2 year’s relevant working experience

Good Pay + Good allowance + Good Bonus

Interested candidates please send an updated Resume / CV in Ms Word format to WhatsApp’s your resume to 98332779 ( no Calls)

Consultant in-charge : Quah Li Lian (Lilian) ( Registration No: R1983286 )

Overview

Our client, a leading provider of advanced maritime technology and automation systems, is seeking a Service Engineer to support their regional and global customers. This role focuses on providing field service, commissioning, and technical support for integrated control monitoring systems (ICMS) and propulsion/steering control systems. Candidates with hands-on experience in main engine and thruster operations will have an added advantage.

The position involves onboard services, project commissioning, remote support, and contributing to backend knowledge sharing to support the field service team.

Key Responsibilities

• Deliver customer support, commissioning, and service for the assigned product range in maritime automation systems.
• Provide technical support and maintain strong relationships with clients across Southeast Asia.
• Perform workshop testing and technical preparations before service deployment.
• Ensure proper preparation and execution of assigned tasks, meeting performance expectations consistently.
• Generate detailed service reports, update technical documentation such as drawings and cable information, and maintain records accurately.
• Offer remote guidance and product support to customers while managing refit/retrofit project commissioning.
• Support the service team with backend technical expertise and assist the sales department with technical inquiries.
• Manage administrative duties, including pre- and post-service documentation, and handle ad hoc assignments as needed.

Requirements

• Minimum Diploma or Degree in Electronics, Electrical, or Instrumentation.
• 3-5 years of field experience in alarm monitoring and control systems, with solid knowledge of computer hardware, peripherals, and basic software applications.
• Familiarity with maritime automation systems, propulsion systems, distributed control systems, and power management.
• Prior experience in the maritime industry is essential.
• Strong skills in teamwork, communication, project management, and customer service.
• Ability to approach remote case handling with a meticulous and methodical mindset.
• Self-motivated and resourceful in finding solutions to technical challenges.
• Willingness to travel internationally on short notice.

Other key information:

• Location: West of Singapore
• Working hours: Mon to Fri, Office Hours

To apply online please use the 'apply' function, with your updated resume attached.

(EA: 94C3609/R1442042)

Position Overview

The candidate will assist the Maintenance Supervisor to conduct preventive maintenance, troubleshooting & repair of CNC machines and update maintenance records regularly.

Job Responsiblities

• Preventive maintenance and calibration of the machines according to the checklist
• Analyse machine problems and repair
• Update and maintain maintenance records and forms regularly
• Any other ad-hoc maintenance activities such as maintaining coolant and lubrication of machines
• Perform other duties and responsibilities, as assigned.

Position Requirements

• Minimum 3 years of hands-on experience in maintenance and repair of CNC metal cutting machines
• Good knowledge in Electrical and Mechanical aspects of CNC Machines
• Able to read the PLC

Position: Service Engineer (Product: Microscopes)
Location: Tai Seng, Singapore
Salary: $2,800 - $3,300, commensurate with experience and educational background
Additional Benefits: Monthly mobile and commuting allowance

Key Requirements:

• Education: Diploma in Engineering
• Experience: 1-2 years in field service, ideally in medical device servicing, with exposure to small, delicate parts
• License: Class 3 driving license preferred

Job Responsibilities:

• Visit clients’ sites to perform servicing and maintenance on microscopes
• Handle small microscope parts with care and precision

How to Apply: Send your resume to Jocelyn Chan at [email protected] or contact via Telegram @jocelynchan

Jocelyn Chan | Consultant | Recruit Express Pte Ltd (Healthcare & Lifescience) Company EA Licence Number: 99C4599 Personnel EA License: R1331820

• MNC Company
• Basic $4000 - $5000 + AWS + Variable Bonus
• Excellent Welfare and Benefits + Career progression
• Working days: Monday to Friday
• Working hours: 8am to 4.30pm
• Jurong Island. Company Transport provided

Job Responsibilities:

• To coordinate Maintenance Activities between Production and Technical department
• Support GCM/SDM MA & MO activities. Support work permit and authorization activities
• Participate in Daily operation and maintenance meetings to support both operation and maintenance activities by keeping status updated with plan
• Coordinates all maintenance activities including safe permit issuance, lockout-tagout preparation, GSAP approval, and supporting relevant parties to effectively complete the maintenance works as needed
• Actively prepare equipment from maintenance phase to commissioning of equipment to ensure the completed jobs function well
• Supports Capital Project/MOC activities in view of blanking, isolation, LOTO and flushing plans are followed to ensure safe handling
• Work closely with the Maintenance engineers on Transition and Turn Around activities from planning stage to commissioning stage
• Prepare markup PIDs covering all the GCM activities to be completed during the transition period for safe and timely start-up
• Coordinate with shift team supervisors to ensure maintenance jobs such as cleaning, washing and technical or in-house contractors follow up jobs are completed before handing over to production
• Support work permitting and work authorization activities
• To perform any other duties or assignments as assigned by superiors

Requirements:

• Diploma/ Degree in relevant field
• Minimum 2-3 years of experience in maintenance planning and coordination

Candidates are encouraged to apply this position via Apply Now button with the following information in the resume

• Work experiences and job responsibilities
• Current and Expected salary
• Reason for leaving
• Date of availability
• Education background

We regret that only shortlisted candidates will be contacted.

THIEN CHING MEI (R2198032)

EA Recruitment Pte Ltd

EA License No: 21C0492

• MNC Company
• Basic $4000 - $5000 + AWS + Variable Bonus
• Excellent Welfare and Benefits + Career progression
• Working days: Monday to Friday
• Working hours: 8am to 4.30pm
• Jurong Island. Company Transport provided

Job Responsibilities:

• To coordinate Maintenance Activities between Production and Technical department
• Support GCM/SDM MA & MO activities. Support work permit and authorization activities
• Participate in Daily operation and maintenance meetings to support both operation and maintenance activities by keeping status updated with plan
• Coordinates all maintenance activities including safe permit issuance, lockout-tagout preparation, GSAP approval, and supporting relevant parties to effectively complete the maintenance works as needed
• Actively prepare equipment from maintenance phase to commissioning of equipment to ensure the completed jobs function well
• Supports Capital Project/MOC activities in view of blanking, isolation, LOTO and flushing plans are followed to ensure safe handling
• Work closely with the Maintenance engineers on Transition and Turn Around activities from planning stage to commissioning stage
• Prepare markup PIDs covering all the GCM activities to be completed during the transition period for safe and timely start-up
• Coordinate with shift team supervisors to ensure maintenance jobs such as cleaning, washing and technical or in-house contractors follow up jobs are completed before handing over to production
• Support work permitting and work authorization activities
• To perform any other duties or assignments as assigned by superiors

Requirements:

• Diploma/ Degree in relevant field
• Minimum 2-3 years of experience in maintenance planning and coordination

Candidates are encouraged to apply this position via Apply Now button with the following information in the resume

• Work experiences and job responsibilities
• Current and Expected salary
• Reason for leaving
• Date of availability
• Education background

We regret that only shortlisted candidates will be contacted.

THIEN CHING MEI (R2198032)

EA Recruitment Pte Ltd

EA License No: 21C0492

• MNC Company
• Basic $4000 - $5000 + AWS + Variable Bonus
• Excellent Welfare and Benefits + Career progression
• Working days: Monday to Friday
• Working hours: 8am to 4.30pm
• Jurong Island. Company Transport provided

Job Responsibilities:

• To coordinate Maintenance Activities between Production and Technical department
• Support GCM/SDM MA & MO activities. Support work permit and authorization activities
• Participate in Daily operation and maintenance meetings to support both operation and maintenance activities by keeping status updated with plan
• Coordinates all maintenance activities including safe permit issuance, lockout-tagout preparation, GSAP approval, and supporting relevant parties to effectively complete the maintenance works as needed
• Actively prepare equipment from maintenance phase to commissioning of equipment to ensure the completed jobs function well
• Supports Capital Project/MOC activities in view of blanking, isolation, LOTO and flushing plans are followed to ensure safe handling
• Work closely with the Maintenance engineers on Transition and Turn Around activities from planning stage to commissioning stage
• Prepare markup PIDs covering all the GCM activities to be completed during the transition period for safe and timely start-up
• Coordinate with shift team supervisors to ensure maintenance jobs such as cleaning, washing and technical or in-house contractors follow up jobs are completed before handing over to production
• Support work permitting and work authorization activities
• To perform any other duties or assignments as assigned by superiors

Requirements:

• Diploma/ Degree in relevant field
• Minimum 2-3 years of experience in maintenance planning and coordination

Candidates are encouraged to apply this position via Apply Now button with the following information in the resume

• Work experiences and job responsibilities
• Current and Expected salary
• Reason for leaving
• Date of availability
• Education background

We regret that only shortlisted candidates will be contacted.

THIEN CHING MEI (R2198032)

EA Recruitment Pte Ltd

EA License No: 21C0492

• MNC Company
• Basic $4000 - $5000 + AWS + Variable Bonus
• Excellent Welfare and Benefits + Career progression
• Working days: Monday to Friday
• Working hours: 8am to 4.30pm
• Jurong Island. Company Transport provided

Job Responsibilities:

• To coordinate Maintenance Activities between Production and Technical department
• Support GCM/SDM MA & MO activities. Support work permit and authorization activities
• Participate in Daily operation and maintenance meetings to support both operation and maintenance activities by keeping status updated with plan
• Coordinates all maintenance activities including safe permit issuance, lockout-tagout preparation, GSAP approval, and supporting relevant parties to effectively complete the maintenance works as needed
• Actively prepare equipment from maintenance phase to commissioning of equipment to ensure the completed jobs function well
• Supports Capital Project/MOC activities in view of blanking, isolation, LOTO and flushing plans are followed to ensure safe handling
• Work closely with the Maintenance engineers on Transition and Turn Around activities from planning stage to commissioning stage
• Prepare markup PIDs covering all the GCM activities to be completed during the transition period for safe and timely start-up
• Coordinate with shift team supervisors to ensure maintenance jobs such as cleaning, washing and technical or in-house contractors follow up jobs are completed before handing over to production
• Support work permitting and work authorization activities
• To perform any other duties or assignments as assigned by superiors

Requirements:

• Diploma/ Degree in relevant field
• Minimum 2-3 years of experience in maintenance planning and coordination

Candidates are encouraged to apply this position via Apply Now button with the following information in the resume

• Work experiences and job responsibilities
• Current and Expected salary
• Reason for leaving
• Date of availability
• Education background

We regret that only shortlisted candidates will be contacted.

THIEN CHING MEI (R2198032)

EA Recruitment Pte Ltd

EA License No: 21C0492

• MNC Company
• Basic $4000 - $5000 + AWS + Variable Bonus
• Excellent Welfare and Benefits + Career progression
• Working days: Monday to Friday
• Working hours: 8am to 4.30pm
• Jurong Island. Company Transport provided

Job Responsibilities:

• To coordinate Maintenance Activities between Production and Technical department
• Support GCM/SDM MA & MO activities. Support work permit and authorization activities
• Participate in Daily operation and maintenance meetings to support both operation and maintenance activities by keeping status updated with plan
• Coordinates all maintenance activities including safe permit issuance, lockout-tagout preparation, GSAP approval, and supporting relevant parties to effectively complete the maintenance works as needed
• Actively prepare equipment from maintenance phase to commissioning of equipment to ensure the completed jobs function well
• Supports Capital Project/MOC activities in view of blanking, isolation, LOTO and flushing plans are followed to ensure safe handling
• Work closely with the Maintenance engineers on Transition and Turn Around activities from planning stage to commissioning stage
• Prepare markup PIDs covering all the GCM activities to be completed during the transition period for safe and timely start-up
• Coordinate with shift team supervisors to ensure maintenance jobs such as cleaning, washing and technical or in-house contractors follow up jobs are completed before handing over to production
• Support work permitting and work authorization activities
• To perform any other duties or assignments as assigned by superiors

Requirements:

• Diploma/ Degree in relevant field
• Minimum 2-3 years of experience in maintenance planning and coordination

Candidates are encouraged to apply this position via Apply Now button with the following information in the resume

• Work experiences and job responsibilities
• Current and Expected salary
• Reason for leaving
• Date of availability
• Education background

We regret that only shortlisted candidates will be contacted.

THIEN CHING MEI (R2198032)

EA Recruitment Pte Ltd

EA License No: 21C0492

• MNC Company
• Basic $4000 - $5000 + AWS + Variable Bonus
• Excellent Welfare and Benefits + Career progression
• Working days: Monday to Friday
• Working hours: 8am to 4.30pm
• Jurong Island. Company Transport provided

Job Responsibilities:

• To coordinate Maintenance Activities between Production and Technical department
• Support GCM/SDM MA & MO activities. Support work permit and authorization activities
• Participate in Daily operation and maintenance meetings to support both operation and maintenance activities by keeping status updated with plan
• Coordinates all maintenance activities including safe permit issuance, lockout-tagout preparation, GSAP approval, and supporting relevant parties to effectively complete the maintenance works as needed
• Actively prepare equipment from maintenance phase to commissioning of equipment to ensure the completed jobs function well
• Supports Capital Project/MOC activities in view of blanking, isolation, LOTO and flushing plans are followed to ensure safe handling
• Work closely with the Maintenance engineers on Transition and Turn Around activities from planning stage to commissioning stage
• Prepare markup PIDs covering all the GCM activities to be completed during the transition period for safe and timely start-up
• Coordinate with shift team supervisors to ensure maintenance jobs such as cleaning, washing and technical or in-house contractors follow up jobs are completed before handing over to production
• Support work permitting and work authorization activities
• To perform any other duties or assignments as assigned by superiors

Requirements:

• Diploma/ Degree in relevant field
• Minimum 2-3 years of experience in maintenance planning and coordination

Candidates are encouraged to apply this position via Apply Now button with the following information in the resume

• Work experiences and job responsibilities
• Current and Expected salary
• Reason for leaving
• Date of availability
• Education background

We regret that only shortlisted candidates will be contacted.

THIEN CHING MEI (R2198032)

EA Recruitment Pte Ltd

EA License No: 21C0492