Our client is from Oil and Gas industry. They are looking for a Senior Mechanical Engineer for the next phase of their business. They are located in West.

Duties:

• Responsible in guiding the maintenance, troubleshooting, repair, commissioning and substitute of mechanical or piping equipment within the Gas Engine Generators as well as its additional systems such as gas engine, pipeline, pressure pipe, ACMVs, lube oil and coolant pumps arrangement.
• Responsible in supporting mechanical support and solutions for the process & care and providing the development of care strategy including procedure/specification focusing on equipment dependability, spares inventory necessity, shutdown and inspection lists, preventive and prophetic care programmed.
• Responsible in managing and work meticulously with internal contractor and equipment seller to perform maintenance work at the Gas Engine Generators Building and terminal.
• Responsible to make certain compliance to appropriate regulations, manipulate safely, fit for object, maintainable and trustworthy for the site’s modified or anew build mechanical setup (such as gas engine, pumps, gravity vessel, safety facilities, etc).
• Responsible in guiding technical negotiations, execute and succeed project schedules or cost as well as collaboration with outward and internal shareholders, merchants for end of life and development project using company Management of Change process for machinery facilities.
• Responsible in supplying technical practicing as required in the area of process, maintenance, fault resolution of the Gas Engine Generators.
• Responsible in contacting with exterior investor including administration agencies on approbation and risk of closure of electrical arrangement that will influence gas-send out.

Requirements

• Min Bachelor’s Degree in Mechanical Engineering or any relevant field.
• Min 3 to 5 years’ experience in relevant industry for maintenance of rotary and staticequipment is needed
• Prior experience in different types of gas/diesel machine knowledges is a bonus.

Interested candidates who wish to apply for the advertised position, please click APPLY NOW or email an updated copy of your resume/cv.

We regret that only shortlisted candidate will be notified.

Email Address: [email protected]

Recruitpedia Pte. Ltd.

EA License No: 19C9682

EA Personnel No: R2198636 (Oh Puey Xin)

Job Scope:

• Conducting regular inspections, preventive maintenance, and troubleshooting on a variety of heavy equipment, such as excavators, loaders, and cranes
• Diagnosing and repairing mechanical, electrical, and hydraulic issues in a timely and cost-effective manner
• Maintaining detailed records of all maintenance activities and equipment performance
• Collaborating with the operations team to coordinate equipment schedules and minimise downtime
• Providing technical guidance and training to operators to promote safe and efficient use of the equipment
• Staying up-to-date with the latest industry trends, technologies, and best practices in heavy equipment maintenance

Requirements:

• Degree in Mechanical Engineering or a related field
• Minimum 2 years of experience in the maintenance and repair of heavy construction equipment
• Strong troubleshooting and problem-solving skills, with the ability to diagnose and resolve complex issues
• Excellent attention to detail and a commitment to maintaining accurate records
• Proven ability to work effectively in a team environment and communicate technical information clearly

Interested candidates who wish to apply for the advertised position, please click on the APPLY button below to send in your resume to [email protected]

EA License No: 13C6305
Reg. No.: R1981808

For candidate who applied for the advertised position is deemed to have consented to us that we may collect, use or disclose your personal information for purpose in connection with the services provided by us.

Our client is from Oil and Gas industry. They are looking for a Senior Mechanical Engineer for the next phase of their business. They are located in West.

Duties:

• Responsible in guiding the maintenance, troubleshooting, repair, commissioning and substitute of mechanical or piping equipment within the Gas Engine Generators as well as its additional systems such as gas engine, pipeline, pressure pipe, ACMVs, lube oil and coolant pumps arrangement.
• Responsible in supporting mechanical support and solutions for the process & care and providing the development of care strategy including procedure/specification focusing on equipment dependability, spares inventory necessity, shutdown and inspection lists, preventive and prophetic care programmed.
• Responsible in managing and work meticulously with internal contractor and equipment seller to perform maintenance work at the Gas Engine Generators Building and terminal.
• Responsible to make certain compliance to appropriate regulations, manipulate safely, fit for object, maintainable and trustworthy for the site’s modified or anew build mechanical setup (such as gas engine, pumps, gravity vessel, safety facilities, etc).
• Responsible in guiding technical negotiations, execute and succeed project schedules or cost as well as collaboration with outward and internal shareholders, merchants for end of life and development project using company Management of Change process for machinery facilities.
• Responsible in supplying technical practicing as required in the area of process, maintenance, fault resolution of the Gas Engine Generators.
• Responsible in contacting with exterior investor including administration agencies on approbation and risk of closure of electrical arrangement that will influence gas-send out.

Requirements

• Min Bachelor’s Degree in Mechanical Engineering or any relevant field.
• Min 3 to 5 years’ experience in relevant industry for maintenance of rotary and staticequipment is needed
• Prior experience in different types of gas/diesel machine knowledges is a bonus.

Interested candidates who wish to apply for the advertised position, please click APPLY NOW or email an updated copy of your resume/cv.

We regret that only shortlisted candidate will be notified.

Email Address: [email protected]

Recruitpedia Pte. Ltd.

EA License No: 19C9682

EA Personnel No: R2198636 (Oh Puey Xin)

Lab Application Engineer (Equipment Maintenance/ Adhesives/ Chemicals)

12 Months Contract

Location: Commonwealth

Industry: Chemicals / Consumer Goods

Salary: Up to $5,000 depending on experience

Responsibilities:

• Performs / supports completion of Root Cause Analysis and Corrective Action Plan on all product related performance complaints
• Supports internal and external technical requests and projects
• Completes Customer Technical Request Testing and Reports within the database or equivalent
• Writes customer facing reports for the Field Sales/Application Engineering teams, Key Account Managers, Marketing, Product Development and Innovations or project team
• Runs and upkeeps laboratory equipment, leads/supports ongoing standardization, harmonization and administration of laboratory test methods
• Ensures laboratory and application equipment are calibrated and safety checked in compliance with local regulations
• Responsible for directly communicating with the Field Sales/Application Engineering teams, Key Account Managers or project team
• Performs customer lab demonstrations and customer training
• To assist in day-to-day laboratory operations e.g. arrangement for testing, inventory control of laboratory supplies and chemicals, etc
• Maintain and upkeep laboratory records, including documentations for inventories, SDS and safety
• Ensure that all safety guidelines are always followed strictly and maintain good housekeeping
• Any other ad-hoc duties assigned

Requirements:

• Bachelor’s Degree in Chemistry, Material Science, or relevant Engineering/technical discipline
• 1-3 years working experience in the laboratory with knowledge on adhesives and/or handling equipment such as DSC, TGA, TMA, DMA, rheometer
• Proactive team player with the ability to work independently
• Knowledgeable in Power Point, Word, Excel, and Statistical Analysis Software

Lim Pey Chyi (Apple) – [email protected]

Recruitment Consultant (R2090579)

Manpower Staffing Services (S) Pte Ltd

EA Licence: 02C3423

The Field Service Engineer is responsible for providing technical expertise and support at customer sites within the maritime industry. This role involves installing, maintaining, troubleshooting, and repairing equipment and systems to ensure optimal performance and customer satisfaction.

Key Responsibilities:

Installation & Commissioning

· Perform installation, setup, and commissioning of maritime equipment and systems onboard vessels or at customer facilities.

· Conduct functional testing and calibration to ensure systems meet operational requirements.

Maintenance & Troubleshooting

· Diagnose and resolve technical issues on mechanical, electrical, and control systems.

· Conduct scheduled and preventive maintenance to minimize equipment downtime.

· Prepare detailed service reports and recommend corrective actions.

Customer Support

· Provide technical advice and training to customers to ensure proper system operation.

· Act as the primary point of contact for technical support during and after project completion.

Compliance & Documentation

· Ensure all work complies with industry standards, safety regulations, and company policies.

· Maintain accurate service records, inspection reports, and parts inventory.

Collaboration

· Liaise with internal teams (sales, engineering, and procurement) to ensure seamless service delivery.

· Provide feedback to improve product design, reliability, and customer experience.

Location: Ubi (Near MRT)

Salary: $2,500 - $3,000 per month (depending on experience)

Work Schedule: 5 days a week

Job Responsibilities

• Prepare and provide quotations for our products.
• Manage the packing and unpacking of products, ensuring they are handled safely.
• Check and repair products as needed to ensure quality.
• Install products at client sites and provide training on their operation.

Requirements

• Diploma in Mechatronics, Mechanical, or Electrical Engineering.
• 1-2 years of relevant experience.
• Strong organizational skills, attention to detail, ability to work independently and meet deadlines.

Interested applicants, please email your resume to [email protected]

Tan Li Lian

EA 01C3135

Reg R1100465

1,Provide First Call Resolution (FCR) technical support via phone and email. Ensure calls are answered and emails are responded in a timely manner.

2. Perform first level troubleshooting on all reported incidents and escalate incidents to 2nd level resolver groups as per work instructions.

3. Furnish and submit timely updates to customers on the status of outstanding issues within targeted Service Level 4. Maintain ownership of cases and follow-up on reported issues until closure and gather accurate and complete relevant information is recorded.

5. Manage customer expectations and notify Team Lead in the event of unusual surge in calls of a specific nature.

6. Handle initial classification/ prioritization of the incidents. Track the progress of resolution and provide regular updates for follow-up actions and incident status.

Job Description:

Technical Tasks:

• Performs installation & provides basic technical training when neccessary (Mainly Workplace infrastructure - WPI products: Medical Pendents & Lights / Gas Management solutions)
• Perform related upgrades / Technical Service Bulletin from factory instructions to ensure devices / equipment are up to date.

Service Operational Tasks:

• Escalate quality-related situation, market dynamics and issues from field to the Service management in his country
• Monitor and drive completion of monthly maintenance tasks and paperwork for assigned customers’ accounts

Service Commercial-related Tasks:

• Makes constant efforts for contract development and implementation of Service programs
• Any other additional duties deemed appropriate by Service Manager

Job Requirements:

• Minimum Nitec in Engineering/Electronics or Equivalent
• 2-3 years of technical experience preferable in after sales support in medical industry, or Workplace Infrastructure related sector

Interested candidates do attach your resume to [email protected]

Attn: Angela Celeste Poh Li Ying (R2095367)

Recruit Express Pte Ltd (99C4599)

Our client is from Oil and Gas industry. They are looking for a Senior Mechanical Engineer for the next phase of their business. They are located in West.

Duties:

• Responsible in guiding the maintenance, troubleshooting, repair, commissioning and substitute of mechanical or piping equipment within the Gas Engine Generators as well as its additional systems such as gas engine, pipeline, pressure pipe, ACMVs, lube oil and coolant pumps arrangement.
• Responsible in supporting mechanical support and solutions for the process & care and providing the development of care strategy including procedure/specification focusing on equipment dependability, spares inventory necessity, shutdown and inspection lists, preventive and prophetic care programmed.
• Responsible in managing and work meticulously with internal contractor and equipment seller to perform maintenance work at the Gas Engine Generators Building and terminal.
• Responsible to make certain compliance to appropriate regulations, manipulate safely, fit for object, maintainable and trustworthy for the site’s modified or anew build mechanical setup (such as gas engine, pumps, gravity vessel, safety facilities, etc).
• Responsible in guiding technical negotiations, execute and succeed project schedules or cost as well as collaboration with outward and internal shareholders, merchants for end of life and development project using company Management of Change process for machinery facilities.
• Responsible in supplying technical practicing as required in the area of process, maintenance, fault resolution of the Gas Engine Generators.
• Responsible in contacting with exterior investor including administration agencies on approbation and risk of closure of electrical arrangement that will influence gas-send out.

Requirements

• Min Bachelor’s Degree in Mechanical Engineering or any relevant field.
• Min 3 to 5 years’ experience in relevant industry for maintenance of rotary and staticequipment is needed
• Prior experience in different types of gas/diesel machine knowledges is a bonus.

Interested candidates who wish to apply for the advertised position, please click APPLY NOW or email an updated copy of your resume/cv.

We regret that only shortlisted candidate will be notified.

Email Address: [email protected]

Recruitpedia Pte. Ltd.

EA License No: 19C9682

EA Personnel No: R2198636 (Oh Puey Xin)

Lab Application Engineer (Equipment Maintenance/ Adhesives/ Chemicals)

12 Months Contract

Location: Commonwealth

Industry: Chemicals / Consumer Goods

Salary: Up to $5,000 depending on experience

Responsibilities:

• Performs / supports completion of Root Cause Analysis and Corrective Action Plan on all product related performance complaints
• Supports internal and external technical requests and projects
• Completes Customer Technical Request Testing and Reports within the database or equivalent
• Writes customer facing reports for the Field Sales/Application Engineering teams, Key Account Managers, Marketing, Product Development and Innovations or project team
• Runs and upkeeps laboratory equipment, leads/supports ongoing standardization, harmonization and administration of laboratory test methods
• Ensures laboratory and application equipment are calibrated and safety checked in compliance with local regulations
• Responsible for directly communicating with the Field Sales/Application Engineering teams, Key Account Managers or project team
• Performs customer lab demonstrations and customer training
• To assist in day-to-day laboratory operations e.g. arrangement for testing, inventory control of laboratory supplies and chemicals, etc
• Maintain and upkeep laboratory records, including documentations for inventories, SDS and safety
• Ensure that all safety guidelines are always followed strictly and maintain good housekeeping
• Any other ad-hoc duties assigned

Requirements:

• Bachelor’s Degree in Chemistry, Material Science, or relevant Engineering/technical discipline
• 1-3 years working experience in the laboratory with knowledge on adhesives and/or handling equipment such as DSC, TGA, TMA, DMA, rheometer
• Proactive team player with the ability to work independently
• Knowledgeable in Power Point, Word, Excel, and Statistical Analysis Software

Lim Pey Chyi (Apple) – [email protected]

Recruitment Consultant (R2090579)

Manpower Staffing Services (S) Pte Ltd

EA Licence: 02C3423

Job Responsibilities:

• Manage the maintenance and daily operations of the building facilities with the objective of always achieving uninterrupted function
• Ensure contractor service level agreements and key performance indicators are met or exceeded
• Perform routine facilities activities including onsite inspection, fix-it verification, critical systems checks, functional testing, etc. Able to respond and act in response to facilities crisis management activities including power outages, fire alarms, and HVAC outages.
• Analyse data and identify trends with facility issues to determine the root causes and take appropriate action
• Respond to BMS alerts, investigate and feedback on any outstanding issues or events and respond to emergency situations and be on standby duty as required
• Assist in all site construction activities and installations, in coordination with external contractors to ensure system design, installation and testing adhere to operational standards.
• Maintain compliance with Workplace Safety & Health (WHS) standards and electrical and building codes
• Ensure adherence to all standard operating procedures (SOP), method of procedures (MOP), and emergency response procedures (ERP) established for the critical environments, as well as the formal change control process
• Participate in the scheduling, coordination, and completion of all significant planned and emergency maintenance events fo the facility and ensure these activities are executed in a controlled and proven method to ensure the reliability of the critical loads supported by these systems
• Plans, monitors, schedules, and implements measures on the Planned Preventive Maintenance Program for the company buildings and also ensures that the work is done in accordance with schedule and specification
• Provides technical support and take charge on matters concerning the parts replacement and repairs maintenance and service activities of all the mechanical & electrical equipment
• Liaise with contractors and suppliers regarding improvement works and purchasing of equipment and spare parts
• Prepares weekly and monthly building reports
• Planning building maintenance and operational programs for the awarded IFM contracts
• Liaison with all stakeholders, attend to stakeholders’ feedback and ensure a smooth operation of facilities. Ensuring efficiency of all building systems
• Preparation of budget and budget controls
• Ensuring all processes and compliance programs are met
• Familiar in administration and functioning of CMMS/FMS software for monitoring, reporting, data analysis and audit.

Requirements - Facilities Engineer

• Degree in Facilities Management or equivalent qualification or Diploma holder in equivalent qualification with more than 5 years relevant experiences
• Preferably with a minimum of 3-5 years' experience in Facilities Maintenance, Project Management.
• Able to comprehend, analyse and interpret complex project documents, including AutoCAD, Visio, and PDF documents.
• Technical and functional knowledge of building infrastructure including electrical and mechanical systems, fire detection and protection systems, building management systems, equipment maintenance, and construction of critical facilities environment.
• Possess Project management skills
• Good analytical, interpersonal and communication skills
• Able to be a good team-player
• Able to work under pressure

Our client is from Oil and Gas industry. They are looking for a Senior Mechanical Engineer for the next phase of their business. They are located in West.

Duties:

• Responsible in guiding the maintenance, troubleshooting, repair, commissioning and substitute of mechanical or piping equipment within the Gas Engine Generators as well as its additional systems such as gas engine, pipeline, pressure pipe, ACMVs, lube oil and coolant pumps arrangement.
• Responsible in supporting mechanical support and solutions for the process & care and providing the development of care strategy including procedure/specification focusing on equipment dependability, spares inventory necessity, shutdown and inspection lists, preventive and prophetic care programmed.
• Responsible in managing and work meticulously with internal contractor and equipment seller to perform maintenance work at the Gas Engine Generators Building and terminal.
• Responsible to make certain compliance to appropriate regulations, manipulate safely, fit for object, maintainable and trustworthy for the site’s modified or anew build mechanical setup (such as gas engine, pumps, gravity vessel, safety facilities, etc).
• Responsible in guiding technical negotiations, execute and succeed project schedules or cost as well as collaboration with outward and internal shareholders, merchants for end of life and development project using company Management of Change process for machinery facilities.
• Responsible in supplying technical practicing as required in the area of process, maintenance, fault resolution of the Gas Engine Generators.
• Responsible in contacting with exterior investor including administration agencies on approbation and risk of closure of electrical arrangement that will influence gas-send out.

Requirements

• Min Bachelor’s Degree in Mechanical Engineering or any relevant field.
• Min 3 to 5 years’ experience in relevant industry for maintenance of rotary and staticequipment is needed
• Prior experience in different types of gas/diesel machine knowledges is a bonus.

Interested candidates who wish to apply for the advertised position, please click APPLY NOW or email an updated copy of your resume/cv.

We regret that only shortlisted candidate will be notified.

Email Address: [email protected]

Recruitpedia Pte. Ltd.

EA License No: 19C9682

EA Personnel No: R2198636 (Oh Puey Xin)

Assistant/Maintenance Engineer (Rotating and Static Equipment)

Responsibilities

• Carry out preventive maintenanceworks in accordance to the preventive maintenance program.
• Manage information and data of maintenance and inspection in the inventory and planning system R-MIC.
• Responsible and coordinate with project team and/or contractors in the big construction or modification work as mechanical engineer.
• Responsible and Coordinate with production team and/or contractors in the investigation of cause of equipment breakdown and propose remedial action.
• Carry out piping design work and manage the actual piping work with safety.
• Carry out small civil design work (e.g. Equipment foundation, Shelter, Loading bay, ACMV and etc.) and manage the actual civil work with safety.
• Coordinate with contractors onsite inspections and repair and maintain and jet cleaning.
• Document management (e.g. To make SOP, WI, RA and presentation slide, To manage drawings for construction, replacement and modification).
• Assist in the preparation of Shut down Maintenance (SDM) planning and execution.
• To take quotation and checking of machine parts and construction work.
• Manage spare parts and consumables inventory for replenishment of stocks.

Requirements

• Min Diploma in Mechanical / Mechatronic Engineering or equivalent.
• Mechanical knowledge and experience (Disassembling, assembling and overhaul of plant equipment and machinery (Such as Pumps, Compressor, Blower, Gear box, Agitator, Mechanical seal and Piping)
• Basic mechanical experience (Maintenance, Repair, Overhaul work)
• Prepared to be on standby to respond to plant emergencies after office hours.
• An effective team player with excellent service attitude.
• Possess strong safety awareness.

Interested applicants please submit your resume to [email protected]

► Good career exposure

► Near Jurong Pier

► Manufacturing industry preferable

Our client is one of the largest e-waste recyclers in Singapore with a global marketing and distribution network.

Job Responsibilities:

• Lead and manage technician and ensure daily, periodical and shutdown maintenance works are executed safely, timely and efficiently.
• Attend and resolve operation equipment's breakdown within short time frame.
• Perform troubleshooting, fault diagnosis and failure analysis to determine cause of equipment/machinery failure.
• Review and conduct technical investigation of production equipment's problems, evaluate findings, prepare analysis reports and recommend countermeasures to enhance equipment's reliability.
• Develop, review, and implement Risk Assessment for all mechanical and electrical work activities.
• Support new recycling process/ product introduction and setting up of new facility & SOP.
• Manage fixed assets and stocks movement, follow up on purchase request and delivery of parts.
• Develop, review, and implement production equipment's maintenance procedure to improve equipment maintenance methodology.
• Ensure all documents & reports generated related projects, update and maintain of maintenance and inventory records and reports.
• Provide guidance and training for supervisor and technicians to develop their skills and expertise on the process and equipment.
• Provide technical expertise for operational processes, implementing technical solutions to improve equipment uptime and asset utilization through use of continuous improvement mindset.
• Ad- hoc assignments as assigned from time to time.

Job Requirements:

• Diploma/Degree in Mechanical Engineering/ Electrical Engineering or its equivalent
• Min 3-5 years of mechanical machinery and facilities maintenance experience
• Knowledge of Microsoft Office applications
• Problem solver, analytical and a team player who display pro-activeness and initiatives and take ownership and be accountable
• Able to work independently with minimum supervision
• Possess good oral and written communication skills

HOW TO APPLY:

Interested applicants, kindly send your resume in MS WORD format or please click on “Apply Now”.

We regret only shortlisted candidates will be notified.

Important Note: Trust Recruit Pte Ltd is committed to safeguarding your personal data in accordance with the Personal Data Protection Act (PDPA).

Please read our privacy statement on our corporate website www.trustrecruit.com.sg.

Trust Recruit Pte Ltd

EA License No: 19C9950

EA Personnel: Lee Jun Siong (Johnson)

EA Personnel Reg No: R24120242

Our client is from Oil and Gas industry. They are looking for a Senior Mechanical Engineer for the next phase of their business. They are located in West.

Duties:

• Responsible in guiding the maintenance, troubleshooting, repair, commissioning and substitute of mechanical or piping equipment within the Gas Engine Generators as well as its additional systems such as gas engine, pipeline, pressure pipe, ACMVs, lube oil and coolant pumps arrangement.
• Responsible in supporting mechanical support and solutions for the process & care and providing the development of care strategy including procedure/specification focusing on equipment dependability, spares inventory necessity, shutdown and inspection lists, preventive and prophetic care programmed.
• Responsible in managing and work meticulously with internal contractor and equipment seller to perform maintenance work at the Gas Engine Generators Building and terminal.
• Responsible to make certain compliance to appropriate regulations, manipulate safely, fit for object, maintainable and trustworthy for the site’s modified or anew build mechanical setup (such as gas engine, pumps, gravity vessel, safety facilities, etc).
• Responsible in guiding technical negotiations, execute and succeed project schedules or cost as well as collaboration with outward and internal shareholders, merchants for end of life and development project using company Management of Change process for machinery facilities.
• Responsible in supplying technical practicing as required in the area of process, maintenance, fault resolution of the Gas Engine Generators.
• Responsible in contacting with exterior investor including administration agencies on approbation and risk of closure of electrical arrangement that will influence gas-send out.

Requirements

• Min Bachelor’s Degree in Mechanical Engineering or any relevant field.
• Min 3 to 5 years’ experience in relevant industry for maintenance of rotary and staticequipment is needed
• Prior experience in different types of gas/diesel machine knowledges is a bonus.

Interested candidates who wish to apply for the advertised position, please click APPLY NOW or email an updated copy of your resume/cv.

We regret that only shortlisted candidate will be notified.

Email Address: [email protected]

Recruitpedia Pte. Ltd.

EA License No: 19C9682

EA Personnel No: R2198636 (Oh Puey Xin)

Job Scope:

• Assist in planning and updating maintenance schedules, permit clearances, and site scheduling.
• Liaise with clients and vendors regarding contract costs and material expenses.
• Use ERP software to manage materials and tools for maintenance operations.
• Attend meetings with clients and vendors as needed.
• Ensure timely adherence to maintenance schedules.
• Prepare and follow up on quotations.
• Support site visits with supervisors and workers when required.

Requirements:

• Diploma in any engineering or other disciplines
• Relevant experience will be added advantage

To Apply, kindly click on the "APPLY NOW" button

We regret that only shortlisted candidates will be notified.

Staffking Pte Ltd (20C0358) | Lee Cheng Yin (Gina) (R22104523)

EA License No: 20C0358

Our client is from Oil and Gas industry. They are looking for a Senior Mechanical Engineer for the next phase of their business. They are located in West.

Duties:

• Responsible in guiding the maintenance, troubleshooting, repair, commissioning and substitute of mechanical or piping equipment within the Gas Engine Generators as well as its additional systems such as gas engine, pipeline, pressure pipe, ACMVs, lube oil and coolant pumps arrangement.
• Responsible in supporting mechanical support and solutions for the process & care and providing the development of care strategy including procedure/specification focusing on equipment dependability, spares inventory necessity, shutdown and inspection lists, preventive and prophetic care programmed.
• Responsible in managing and work meticulously with internal contractor and equipment seller to perform maintenance work at the Gas Engine Generators Building and terminal.
• Responsible to make certain compliance to appropriate regulations, manipulate safely, fit for object, maintainable and trustworthy for the site’s modified or anew build mechanical setup (such as gas engine, pumps, gravity vessel, safety facilities, etc).
• Responsible in guiding technical negotiations, execute and succeed project schedules or cost as well as collaboration with outward and internal shareholders, merchants for end of life and development project using company Management of Change process for machinery facilities.
• Responsible in supplying technical practicing as required in the area of process, maintenance, fault resolution of the Gas Engine Generators.
• Responsible in contacting with exterior investor including administration agencies on approbation and risk of closure of electrical arrangement that will influence gas-send out.

Requirements

• Min Bachelor’s Degree in Mechanical Engineering or any relevant field.
• Min 3 to 5 years’ experience in relevant industry for maintenance of rotary and staticequipment is needed
• Prior experience in different types of gas/diesel machine knowledges is a bonus.

Interested candidates who wish to apply for the advertised position, please click APPLY NOW or email an updated copy of your resume/cv.

We regret that only shortlisted candidate will be notified.

Email Address: [email protected]

Recruitpedia Pte. Ltd.

EA License No: 19C9682

EA Personnel No: R2198636 (Oh Puey Xin)

Our client is from Oil and Gas industry. They are looking for a Senior Mechanical Engineer for the next phase of their business. They are located in West.

Duties:

• Responsible in guiding the maintenance, troubleshooting, repair, commissioning and substitute of mechanical or piping equipment within the Gas Engine Generators as well as its additional systems such as gas engine, pipeline, pressure pipe, ACMVs, lube oil and coolant pumps arrangement.
• Responsible in supporting mechanical support and solutions for the process & care and providing the development of care strategy including procedure/specification focusing on equipment dependability, spares inventory necessity, shutdown and inspection lists, preventive and prophetic care programmed.
• Responsible in managing and work meticulously with internal contractor and equipment seller to perform maintenance work at the Gas Engine Generators Building and terminal.
• Responsible to make certain compliance to appropriate regulations, manipulate safely, fit for object, maintainable and trustworthy for the site’s modified or anew build mechanical setup (such as gas engine, pumps, gravity vessel, safety facilities, etc).
• Responsible in guiding technical negotiations, execute and succeed project schedules or cost as well as collaboration with outward and internal shareholders, merchants for end of life and development project using company Management of Change process for machinery facilities.
• Responsible in supplying technical practicing as required in the area of process, maintenance, fault resolution of the Gas Engine Generators.
• Responsible in contacting with exterior investor including administration agencies on approbation and risk of closure of electrical arrangement that will influence gas-send out.

Requirements

• Min Bachelor’s Degree in Mechanical Engineering or any relevant field.
• Min 3 to 5 years’ experience in relevant industry for maintenance of rotary and staticequipment is needed
• Prior experience in different types of gas/diesel machine knowledges is a bonus.

Interested candidates who wish to apply for the advertised position, please click APPLY NOW or email an updated copy of your resume/cv.

We regret that only shortlisted candidate will be notified.

Email Address: [email protected]

Recruitpedia Pte. Ltd.

EA License No: 19C9682

EA Personnel No: R2198636 (Oh Puey Xin)

Our client is from Oil and Gas industry. They are looking for a Senior Mechanical Engineer for the next phase of their business. They are located in West.

Duties:

• Responsible in guiding the maintenance, troubleshooting, repair, commissioning and substitute of mechanical or piping equipment within the Gas Engine Generators as well as its additional systems such as gas engine, pipeline, pressure pipe, ACMVs, lube oil and coolant pumps arrangement.
• Responsible in supporting mechanical support and solutions for the process & care and providing the development of care strategy including procedure/specification focusing on equipment dependability, spares inventory necessity, shutdown and inspection lists, preventive and prophetic care programmed.
• Responsible in managing and work meticulously with internal contractor and equipment seller to perform maintenance work at the Gas Engine Generators Building and terminal.
• Responsible to make certain compliance to appropriate regulations, manipulate safely, fit for object, maintainable and trustworthy for the site’s modified or anew build mechanical setup (such as gas engine, pumps, gravity vessel, safety facilities, etc).
• Responsible in guiding technical negotiations, execute and succeed project schedules or cost as well as collaboration with outward and internal shareholders, merchants for end of life and development project using company Management of Change process for machinery facilities.
• Responsible in supplying technical practicing as required in the area of process, maintenance, fault resolution of the Gas Engine Generators.
• Responsible in contacting with exterior investor including administration agencies on approbation and risk of closure of electrical arrangement that will influence gas-send out.

Requirements

• Min Bachelor’s Degree in Mechanical Engineering or any relevant field.
• Min 3 to 5 years’ experience in relevant industry for maintenance of rotary and staticequipment is needed
• Prior experience in different types of gas/diesel machine knowledges is a bonus.

Interested candidates who wish to apply for the advertised position, please click APPLY NOW or email an updated copy of your resume/cv.

We regret that only shortlisted candidate will be notified.

Email Address: [email protected]

Recruitpedia Pte. Ltd.

EA License No: 19C9682

EA Personnel No: R2198636 (Oh Puey Xin)

The Senior Service Engineer is responsible for providing technical expertise and support at customer sites. This role involves installing, maintaining, troubleshooting, and repairing equipment and systems to ensure optimal performance and customer satisfaction. This role is also a Team Lead for specific Service Team.

Key Responsibilities:

Installation & Commissioning

· Perform installation, setup, and commissioning of maritime equipment and systems onboard vessels or at customer facilities.

· Conduct functional testing and calibration to ensure systems meet operational requirements.

Maintenance & Troubleshooting

· Diagnose and resolve technical issues on mechanical, electrical, and control systems.

· Conduct scheduled and preventive maintenance to minimize equipment downtime.

· Prepare detailed service reports and recommend corrective actions.

Customer Support

· Provide technical advice and training to customers to ensure proper system operation.

· Act as the primary point of contact for technical support during and after project completion.

Compliance & Documentation

· Ensure all work complies with industry standards, safety regulations, and company policies.

· Maintain accurate service records, inspection reports, and parts inventory.

Collaboration

· Liaise with internal teams (sales, engineering, and procurement) to ensure seamless service delivery.

· Provide feedback to improve product design, reliability, and customer experience.

Leadership

· Leading and guide team members

We are a Singaporean SME located in Jurong area, manufacturer and agent for Weighing and Weighing Related Equipment, Electronic Measurement & Control Devices, Powder Processing Equipment and Systems, and Packaging Equipment. The foundation of our continued success over the past 69 years is a dedicated and professional team that strives relentlessly to overcome all challenges.

We are looking for suitable and qualified professionals to join us and contribute to our dynamic organization.

You will be part of the Engineering team to provide service to both local and overseas customer, which will involve maintenance and servicing of process equipment, installation, testing and commissioning.

THE ROLE: __________________________________________________________

* Conduct all aspects of service activities; include attendance to technical meeting and discussion with client, and overseas travel to support our regional market.

* Comprehend Electrical/ Mechanical/ Process and Instrument design and shop drawings.

* Working closely with Sales and Project teams in projects execution, plants and equipment installation, testing, commissioning, training, repairing and servicing.

* Candidate with prior experiences will have the opportunity to design and build customized solutions for client.

* Identify variation works and submit accurate cost implication

* Schedule, supervise and control sub-contractors to carry out their works accurately and timely in accordance to the contract drawings, specifications and approved QA/QC checklists

THE PERSON: ________________________________________________________

* At least Diploma in Mechanical / Mechatronics Engineering or its equivalent

* Working experience in related field of Solids Bulk Handling, Powder Processing Machineries, Bulk Packaging Machines.

* Fresh graduates are welcome to apply.

* Possess good communication and facilitation skills, and the use of Microsoft Project, ACAD, Solidworks

* Valid Class 3 driving license in Singapore as added advantage

* Hands-on, practical and independent person who is able to travel

Key Responsibilities

• Conduct regular inspections and maintenance of lifeboats, davits, and related safety systems in accordance with SOLAS and IMO standards.
  Perform load testing, release gear inspections, and condition assessments.
  
• Diagnose and repair faults in mechanical, hydraulic, and electrical systems.
  Ensure all repairs meet quality standards and comply with regulatory requirements.
  
• Prepare inspection and maintenance reports for submission to classification societies or flag authorities.
  Maintain accurate records of completed work, including parts and labor used.
  
• Provide technical support and advice to clients regarding lifeboat safety and equipment compliance.
  Offer guidance on preventative maintenance programs.
  
• Stay updated with international maritime safety regulations and standards.
  Ensure work is performed in a safe manner, following company and industry safety protocols.
  

Qualifications

• Diploma or degree in Marine Engineering, Mechanical Engineering, or a related field.
• Certification in lifeboat inspection and servicing (e.g., SOLAS or manufacturer-specific training).
• Proven experience in lifeboat maintenance, repair, and servicing (3+ years preferred).
• Strong knowledge of maritime safety regulations, including SOLAS, IMO, and LSA Code requirements.
• Hands-on experience with hydraulic, electrical, and mechanical systems.

We are looking for a service engineer to support the preventive Maintenance on the Army Comms Equipment & Accessories. Must be able to perform Battery replacement, functional test and Air Leak test.

Responsibilities:

• To support the Preventive Maintenance on the Army Comms Equipment & Accessories.
• Must be able to perform battery replacement, Air leak Test and Functional Test and checking on Comms Accessories.

Requirements

• Diploma / ITC / NTC-2 in Electronics and Communications Engineering or equivalent
• At least 1-2 years of related working experience in Electronics and Communications Equipment
• Team player and able to work independently.

Other Information

• Good soldering skill will add an advantage

Role:

• Diagnose and troubleshoot problems with marine engines, auxiliary engines, steering systems, and other related components.
• Carry out repairs on inboard and outboard engines, including work on fuel, cooling, and exhaust systems.
• Perform routine maintenance to ensure all shipboard systems are functioning properly.
• Maintain cleanliness of the ship and engine room while onboard.
• Provide detailed reports on work performed and communicate the nature of repairs and services to customers.

Safety and Compliance:

• Follow all safety protocols and regulations to maintain a safe working environment.
• Ensure compliance with environmental regulations related to marine services and repairs.

Documentation and Reporting:

• Keep accurate records of all services performed, including time spent, parts used, and labor involved.
• Use service management software to log and track repairs and maintenance tasks.

Team Collaboration:

• Collaborate with other technicians and service team members to ensure efficient workflow and high levels of customer satisfaction.
• Assist in training and mentoring junior technicians as required.
• Perform any other duties as assigned.

Requirements:

• Diploma or equivalent; technical certification or associate degree in marine mechanics or a related field is preferred.
• Minimum of 2 years’ experience in marine service and repair.
• Strong mechanical skills and ability to solve problems.
• Proficient in using diagnostic tools and marine service equipment.
• Knowledge of marine engines, auxiliary engines, and cargo pumps.
• Ability to read and understand technical manuals and schematics.
• Capable of lifting heavy objects, working in various weather conditions, and performing physically demanding tasks.

The Field Service Engineer is responsible for providing technical expertise and support at customer sites. This role involves installing, maintaining, troubleshooting, and repairing equipment and systems to ensure optimal performance and customer satisfaction.

Key Responsibilities:

Installation & Commissioning

· Perform installation, setup, and commissioning of maritime equipment and systems onboard vessels or at customer facilities.

· Conduct functional testing and calibration to ensure systems meet operational requirements.

Maintenance & Troubleshooting

· Diagnose and resolve technical issues on mechanical, electrical, and control systems.

· Conduct scheduled and preventive maintenance to minimize equipment downtime.

· Prepare detailed service reports and recommend corrective actions.

Customer Support

· Provide technical advice and training to customers to ensure proper system operation.

· Act as the primary point of contact for technical support during and after project completion.

Compliance & Documentation

· Ensure all work complies with industry standards, safety regulations, and company policies.

· Maintain accurate service records, inspection reports, and parts inventory.

Collaboration

· Liaise with internal teams (sales, engineering, and procurement) to ensure seamless service delivery.

· Provide feedback to improve product design, reliability, and customer experience.