Our client is from Oil and Gas industry. They are looking for a Electrical & Control Maintenance Supervisor to assist their team for the next phase of their business. They are located in West.

Duties:

• Lead and supervise electrical technicians and contractors in system installation, maintenance, and repair.
• Develop and conduct on-the-job training programs for E&I team members.
• Perform site inspections and quality control for electrical work.
• Review and approve electrical isolation, excavation, and related permits.
• Investigate electrical maintenance issues, identify root causes, and implement solutions.
• Collaborate with other engineers to ensure equipment reliability through effective maintenance programs.

Requirements:

• Minimum Bachelors Degree in Electrical Engineering or any relevant field.
• Minimum 8 to 12 years experience in Oil and Gas Industry or any relevant industry.

Interested candidates who wish to apply for the advertised position, please click APPLY NOW or email an updated copy of your resume/cv. We regret that only shortlisted candidate will be notified.

Email address: [email protected]

Recruitpedia Pte. Ltd.

EA License No. 19C9682
EA Reg. No. R22108850 (Chan Mun Mun)

Our client is from Oil and Gas industry. They are looking for a Senior Mechanical Engineer for the next phase of their business. They are located in West.

Duties:

• Responsible in guiding the maintenance, troubleshooting, repair, commissioning and substitute of mechanical or piping equipment within the Gas Engine Generators as well as its additional systems such as gas engine, pipeline, pressure pipe, ACMVs, lube oil and coolant pumps arrangement.
• Responsible in supporting mechanical support and solutions for the process & care and providing the development of care strategy including procedure/specification focusing on equipment dependability, spares inventory necessity, shutdown and inspection lists, preventive and prophetic care programmed.
• Responsible in managing and work meticulously with internal contractor and equipment seller to perform maintenance work at the Gas Engine Generators Building and terminal.
• Responsible to make certain compliance to appropriate regulations, manipulate safely, fit for object, maintainable and trustworthy for the site’s modified or anew build mechanical setup (such as gas engine, pumps, gravity vessel, safety facilities, etc).
• Responsible in guiding technical negotiations, execute and succeed project schedules or cost as well as collaboration with outward and internal shareholders, merchants for end of life and development project using company Management of Change process for machinery facilities.
• Responsible in supplying technical practicing as required in the area of process, maintenance, fault resolution of the Gas Engine Generators.
• Responsible in contacting with exterior investor including administration agencies on approbation and risk of closure of electrical arrangement that will influence gas-send out.

Requirements

• Min Bachelor’s Degree in Mechanical Engineering or any relevant field.
• Min 3 to 5 years’ experience in relevant industry for maintenance of rotary and staticequipment is needed
• Prior experience in different types of gas/diesel machine knowledges is a bonus.

Interested candidates who wish to apply for the advertised position, please click APPLY NOW or email an updated copy of your resume/cv.

We regret that only shortlisted candidate will be notified.

Email Address: [email protected]

Recruitpedia Pte. Ltd.

EA License No: 19C9682

EA Personnel No: R2198636 (Oh Puey Xin)

Technician / Mechanic | Maintenance Department | 5Days | Electrical Engineer | Jurong East

Working Days: 5 days (8am - 6pm)
Office Location: Toh Guan Road
Salary: up to $2800
other benefits: flex benefits $100-$300/year + transport allowance $50-$120/month + will state exact amount of confirmation increment $50 - $200

Summary:
To perform preventive and corrective maintenace works on equipment, and standby duties as required so that the equipment can function properly and safely

Requirements:

• Nitec in Electrical Engineering
• Technician experience in lift industry

Job Scope:

• Carry out preventive and corrective maintenace works in accordance to the schedule
• Carry out corrective maintenace works as when required
• Observe safety work procedures
• Ensure proper keeping and use of tools
• Observe proper work behaviour while working
• Perform standby works when required
• Follow up on breakdown report and assist Stanby Section where required
• Report to the superiors on all matters relating to team
• Carry out any other duties as assigned by the superior
• Keep proper records of of works carried out in the revelent reports
• Attend to the building or equipment inspections as required, by law (BCD, FSB)
• Assist in conducting and investigating of damages/accidents to equipment or personnel
• Follow up on QC and QA defects.
• Ensure compliance to Environmental policy, reduction of waste and prevention of pollution

The Supreme HR Advisory Pte Ltd | 14C7279

Ong Boon Kiet (Travys) | R22104769

Senior Recruitment Consultant

Enjoy free travel, health screening, flexible benefits and more!

Responsibilities:

· Assist to monitor and improve the reliability performance of the bus models through cost-effective means.

· Work with suppliers on issues and mitigation measures attributed to design or quality inadequacy

· Monitor fleet performance and supervise engineering / maintenance activities in order to achieve set company requirements and expectation

· Assist to review and develop bus maintenance policy, maintenance strategies, maintenance methodologies and introduce innovative ways to maintain the fleet so as to achieve efficient and cost-effective engineering/maintenance operations to support bus operations

· Assist in maintenance planning through providing required budget, cost control and variance analysis.

· Other ad-hoc duties as assigned

Requirements:

· Diploma in Engineering

· At least 2 years of relevant work experience in Automotive Industry

· Strong communication and interpersonal skills

· Proficient in software application such as Microsoft Office. Knowledge in SAP is an added advantage

· May need to travel if required

We regret to inform that only shortlisted applicants will be notified

Submitting this application for this position, you acknowledge that you have read the Data Protection Policy for Job Applicants (the “Policy”) of SBS Transit Ltd and its subsidiaries, affiliates and related corporations (‘SBST”) and consent to:

a. The collection, use and disclosure of your personal data by SBST for the purposes of your application and potential employment with SBST and the purposes set out in the Policy: and

b. SBST’s retention of your personal data for two years for consideration of future job opportunities (where applicable) form the date of submission of application.

Responsibilities:

• Provide general administrative support to Maintenance Department.
• Maintain records of maintenance activities in the appropriate logs.
• Support preparing documentation and reports.
• Assist in regular maintenance inspection and liaise with the vendor for the schedule arrangement.
• Perform other general administrative duties assigned by Superior.

Requirements：

• Superior organizational skills and multitasking abilities.
• Strong communication skills.
• Attention to the little details.
• Problem-solving skills.
• Basic qualification or sufficient experience as an Admin in Construction Sector.

Technician / Mechanic (Maintenance Department)

• Working Days: 5 days (8am - 6pm)
• Office Location: Jurong East
• Salary: up to $2800
• Other benefits: flex benefits $100-$300/year + transport allowance $50-$120/month + will state exact amount of confirmation increment $50 - $200

Summary:

• To perform preventive and corrective maintenace works on equipment, and standby duties as required so that the equipment can function properly and safely

Requirements:

• Nitec in Electrical Engineering
• Technician experience in lift industry

Job Scope:

• Carry out preventive and corrective maintenace works in accordance to the schedule
• Carry out corrective maintenace works as when required
• Observe safety work procedures
• Ensure proper keeping and use of tools
• Observe proper work behaviour while working
• Perform standby works when required
• Follow up on breakdown report and assist Stanby Section where required
• Report to the superiors on all matters relating to team
• Carry out any other duties as assigned by the superior
• Keep proper records of of works carried out in the revelent reports
• Attend to the building or equipment inspections as required, by law (BCD, FSB)
• Assist in conducting and investigating of damages/accidents to equipment or personnel
• Follow up on QC and QA defects.
• Ensure compliance to Environmental policy, reduction of waste and prevention of pollution

Chew Xing Shan Reg No: R22107044

The Supreme HR Advisory Pte Ltd EA No: 14C7279

Our client is from Oil and Gas industry. They are looking for a Maintenance Scheduler (E&I) to assist their team for the next phase of their business. They are located in West.

Duties:

• Plan and schedule daily maintenance tasks for Electrical & Control assets.
• Coordinate with Mechanical, HSSE, Production, and Jetty Operations teams on work requests and permits.
• Liaise with authorities for natural gas equipment maintenance approvals.
• Coordinate with external vendors and contractors for site surveys and work execution.
• Ensure validity of Method of Statement and risk assessments.

Requirements:

• Minimum Bachelors Degree in Electrical Engineering or any relevant field.
• Minimum 5 to 8 years of E&I experience in Oil and Gas Industry or any relevant industry.

Interested candidates who wish to apply for the advertised position, please click APPLY NOW or email an updated copy of your resume/cv. We regret that only shortlisted candidate will be notified.

Email address: [email protected]

Recruitpedia Pte. Ltd.

EA License No. 19C9682
EA Reg. No. R22108850 (Chan Mun Mun)

Position: IT (Infomation Technology) Manager

Working Location: North-east region

Working Hours: 8am - 6pm

Working Days: 5days

Salary Range: Up to $7.5k

KEY ROLE(S), RESPONSIBILITIES AND DUTIES

• Support and responsible for IT Project from conceptualise to Delivery stage.
• Manage 3rd party vendors to ensure service and support are delivered in accordance with the service level agreement.
• To assist with procurement and maintain up to date inventory tracking.
• Analyze, design, program, test, document and maintain IT systems or applications which align with business needs by using SQL script/other software tools.
• Responsible to ensure the accuracy of all necessary analysis tools and report that provide to management for analysis in optimal decision-making.
• Support the launching of new frontend or backend systems, IT relevant projects, resources and vendor management.
• To ensure that the communication links between the various offices and stores are in optimal working condition, including maintaining and managing an effective fault reporting system.
• To maintain and ensure system security and data integrity.
• To ensure all transactions pertaining to System are properly completed within the cut-off date before performing month-end process.
• Support and assist in change requests and application enhancement to the ERP system.
• Handle ad-hoc IT projects whenever required.

JOB REQUIREMENT:

• Minimum Degree/Diploma in Computer Science or related field.
• Minimum 5 years of working experience in technical support in ERP system, as well as the Experience with Servers Backup and maintenance.
• Oversee IT services and operations, network infrastructure and telecommunication service, as well as handle the full spectrum of ERP system.

Interested Personal kindly contact WhatsApp :+65 8833 7969(Lydia)

OR

Email to : [email protected]

Lydia Chieng Zhi Yee Reg No: R1988890

The Supreme HR Advisory Pte Ltd EA No: 14C7279

Job Responsibilities:

• Help manage and take care of the site accordingly..
• Work with a team to do daily jobs to check on building works well.
• Follow Client rules and guidelines, plus legal rules, when making plans and doing tasks.
• Quickly handle Client requests, feedback, complaints, and other needs.
• Make sure contractors finish their work on time and keep the building systems working smoothly.
• Perform any other assigned duties by your supervisor.
  

Requirements:

• Nitec qualification in technical or building services or equivalent.
• At least one year of relevant working experience or in the alternative, OR possess at least 5 years of technical experience in the field of facilities management.
• Possess Company Emergency Response Team (CERT) will be preferred
• Able to start work immediately or within short notice.

interested applicants, please write in through CareersFuture with detailed resume in MS Words format

EA License Number: 23C1730

Please Provide:

1) Availability
2) Current/ Expected salary
3) Reasons for leaving previous employments

We regret that only shortlisted candidates will be notified.

Job Responsibilities:

Ø Complete maintenance jobs in accordance with the highest standards of efficiency.

Ø Must have rotating equipment service maintenance experience in process industry

Ø Review and assign work to maintenance employees

Ø Maintain schedule compliance and priority

Ø Supply reporting to the maintenance coordinator on repair jobs including consumption of tools, materials, man hours and skills

Ø Develop and execute training plan for maintenance workers

Ø Monitor and manage the maintenance budget, ensuring cost-effective operations and adherence to financial guidelines

Requirements:

Ø Promote communication as well as good relations between the production and the maintenance departments

Ø Must have possession of relevant technical knowledge

Ø Must possess clerical ability

Ø Candidate must have at least a NTC or Diploma degree.

Ø Minimum 5+ years of experience in related operations

• Responsible for corrective and preventive maintenance of plant machinery and monitoring of critical spare parts.
• Carry out corrective maintenance on plant machines.
• Support on preventive maintenance and machine repair.
• Attend to machines installation, modification, safety items, laboratory equipment, etc.
• Identify and carry out improvement items for machines.
• Liaise with machine agents for repair or maintenance of machines.

Requirements:

• Degree in Electrical/Electronic or Mechanical Engineering
• Prefer 2-3 year(s) of experience in maintenance/repair of machine in a manufacturing environment.
• Good trouble shooting, presentation and analytical skills.
• Good knowledge of PLC programming skills.
• Self-disciplined, independent and able to work under pressure.
• Able to communicate with all levels of staff.
• Able to commit to 12 hours shift work.

Manufacturing Industry

Loyang Area

Interested Applicants, kindly email your detailed resume to [email protected]

Tempserv Pte Ltd

License No : 06C3745

Audris Teo/ EA Personnel No: R1102063

Responsibilities:

• Support the Mechanical maintenance team for plant and equipment maintenance

• Conduct scheduled plant inspections to ensure compliance with maintenance regimes and safety regulations.

• Coordinate all Mechanical Maintenance programs, including PM and CM activities.

• Manage and optimize planned maintenance during minor and major overhauls and inspections.

• Analyze failures of mechanical systems and components, recommending corrective actions and conducting troubleshooting.

• Evaluate and implement plant improvement projects to enhance reliability and performance.

• Supervise maintenance contract works and prepare work procedures for all maintenance activities.

• Manage equipment parts and services procurement, adhering to technical specifications.

• Track department budget expenditure against approved allocations.

• Effectively support and manage the maintenance team, fostering a culture of safety and excellence in the industry.

Requirements:

• Minimum 3-4 years of relevant experience in plant maintenance in Oil and Gas industries

• Degree in Mechanical Engineering or equivalent

• Sound Mechanical Engineering Maintenance Knowledge

• Knowledge of safety and statutory requirement will be an advantage.

• Self-motivated team player with analytical mind, strong planning and problem-solving skills.

Interested applicants, please write in through CareersFuture with detailed resume in MS Words format.

EA License Number: 23C1730

Please Provide:

1) Availability

2) Current/ Expected salary

3) Reasons for leaving previous employments

We regret that only shortlisted candidates will be notified.

The Job

• Perform installation, maintenance, troubleshooting and repair of machines / equipment.

• Carry out maintenance work in accordance with the maintenance schedule and update all daily, monthly and yearly maintenance checklists accurately.

Requirements:

· Diploma in Mechanical / Mechatronics / Electrical Engineering

Good Pay + Good allowance + Good Bonus

Interested candidates please send an updated Resume / CV in Ms Word format to WhatsApp’s your resume to 98332779 ( no Calls)

Consultant in-charge : Quah Li Lian (Lilian) ( Registration No: R1983286 )

Responsibilities:

• Design and engineer mechanical systems and components for power generation equipment, including turbines, boilers, pumps, and piping systems. Ensure designs comply with industry standards, codes, and regulations.
• Develop maintenance plans and procedures for mechanical equipment and systems. Conduct routine inspections, troubleshoot mechanical failures, and implement corrective actions to minimize downtime and ensure operational reliability.
• Analyze equipment performance data, including temperature, pressure, and vibration measurements, to identify opportunities for efficiency improvements and reliability enhancements. Implement design modifications or upgrades to optimize performance.
• Conduct risk assessments for mechanical systems and components to identify potential hazards and mitigate safety risks. Ensure compliance with relevant safety standards, regulations, and environmental requirements.
• Lead mechanical engineering projects from conception to completion, including scope definition, budgeting, scheduling, and resource allocation. Coordinate with cross-functional teams, contractors, and vendors to ensure project objectives are achieved on time and within budget.
• Identify opportunities for process improvements, cost reductions, and technology advancements in mechanical engineering practices. Implement best practices and innovative solutions to enhance plant performance and reliability.
• Maintain accurate documentation of mechanical designs, specifications, procedures, and maintenance records. Prepare technical reports, presentations, and documentation for internal stakeholders and regulatory agencies as required.

Requirements:

• Minimum 3-4 years of relevant experience in plant maintenance in Oil and Gas industries

• Degree in Mechanical Engineering or equivalent

• Sound Mechanical Engineering Maintenance Knowledge

• Knowledge of safety and statutory requirement will be an advantage.

• Self-motivated team player with analytical mind, strong planning and problem-solving skills.

Interested applicants, please write in through CareersFuture with detailed resume in MS Words format.

EA License Number: 23C1730

Please Provide:

1) Availability

2) Current/ Expected salary

3) Reasons for leaving previous employments

We regret that only shortlisted candidates will be notified.

• 5 days, Jurong West, Transport provided
• $2400 - $2800, allowances
• AWS, performance bonus, medical/dental benefits
• Good leadership skills
• Warehouse environment

Description

• Supervise maintenance and production workers, as well as contract workers
• Troubleshoot production machines and electrical systems in the company
• Operate production machine

Requirements:

• Minimum ITE in Electrical and Mechanical Engineering
• Minimum 1-3 years experience in electrical and mechanical
• A hands-on person
• Independent, fast learner with a positive attitude and able to multi-task

Interested applicants, please send your applicants to [email protected]

Our client is from Oil and Gas industry. They are looking for a Electrical & Control Maintenance Supervisor to assist their team for the next phase of their business. They are located in West.

Duties:

• Lead and supervise electrical technicians and contractors in system installation, maintenance, and repair.
• Develop and conduct on-the-job training programs for E&I team members.
• Perform site inspections and quality control for electrical work.
• Review and approve electrical isolation, excavation, and related permits.
• Investigate electrical maintenance issues, identify root causes, and implement solutions.
• Collaborate with other engineers to ensure equipment reliability through effective maintenance programs.

Requirements:

• Minimum Bachelors Degree in Electrical Engineering or any relevant field.
• Minimum 8 to 12 years experience in Oil and Gas Industry or any relevant industry.

Interested candidates who wish to apply for the advertised position, please click APPLY NOW or email an updated copy of your resume/cv. We regret that only shortlisted candidate will be notified.

Email address: [email protected]

Recruitpedia Pte. Ltd.

EA License No. 19C9682
EA Reg. No. R22108850 (Chan Mun Mun)

Our client is from Oil and Gas industry. They are looking for a Senior Mechanical Engineer for the next phase of their business. They are located in West.

Duties:

• Responsible in guiding the maintenance, troubleshooting, repair, commissioning and substitute of mechanical or piping equipment within the Gas Engine Generators as well as its additional systems such as gas engine, pipeline, pressure pipe, ACMVs, lube oil and coolant pumps arrangement.
• Responsible in supporting mechanical support and solutions for the process & care and providing the development of care strategy including procedure/specification focusing on equipment dependability, spares inventory necessity, shutdown and inspection lists, preventive and prophetic care programmed.
• Responsible in managing and work meticulously with internal contractor and equipment seller to perform maintenance work at the Gas Engine Generators Building and terminal.
• Responsible to make certain compliance to appropriate regulations, manipulate safely, fit for object, maintainable and trustworthy for the site’s modified or anew build mechanical setup (such as gas engine, pumps, gravity vessel, safety facilities, etc).
• Responsible in guiding technical negotiations, execute and succeed project schedules or cost as well as collaboration with outward and internal shareholders, merchants for end of life and development project using company Management of Change process for machinery facilities.
• Responsible in supplying technical practicing as required in the area of process, maintenance, fault resolution of the Gas Engine Generators.
• Responsible in contacting with exterior investor including administration agencies on approbation and risk of closure of electrical arrangement that will influence gas-send out.

Requirements

• Min Bachelor’s Degree in Mechanical Engineering or any relevant field.
• Min 3 to 5 years’ experience in relevant industry for maintenance of rotary and staticequipment is needed
• Prior experience in different types of gas/diesel machine knowledges is a bonus.

Interested candidates who wish to apply for the advertised position, please click APPLY NOW or email an updated copy of your resume/cv.

We regret that only shortlisted candidate will be notified.

Email Address: [email protected]

Recruitpedia Pte. Ltd.

EA License No: 19C9682

EA Personnel No: R2198636 (Oh Puey Xin)

Location: East

Mon to Fri 8am to 5pm

Have AWS & bonus

Hands-on job

Job Requirement

1. Able to do PLC, HMI, programming with Mitsubishi and Omron brand.

2. Experience in handling Mitsubishi and Omron product servo motor products.

3. Understanding and being able to design automation electrical circuits.

4. Hard working and able to work hands on.

Requirements

• Diploma in Engineering
• At least 2 years experience

*Only shortlisted candidates will be notified*

Please submit your updated resume in MS format by using the APPLY NOW BUTTON.

Alternatively, you may also email your resume to us at [email protected]

Emily Fong

Senior Talent Specialist
Atomrecruit Pte. Ltd. | MOM EA License No.: 15C7443
EA Personnel Reg No.: R1768368

Our client is from Oil and Gas industry. They are looking for a Maintenance Scheduler (E&I) to assist their team for the next phase of their business. They are located in West.

Duties:

• Plan and schedule daily maintenance tasks for Electrical & Control assets.
• Coordinate with Mechanical, HSSE, Production, and Jetty Operations teams on work requests and permits.
• Liaise with authorities for natural gas equipment maintenance approvals.
• Coordinate with external vendors and contractors for site surveys and work execution.
• Ensure validity of Method of Statement and risk assessments.

Requirements:

• Minimum Bachelors Degree in Electrical Engineering or any relevant field.
• Minimum 5 to 8 years of E&I experience in Oil and Gas Industry or any relevant industry.

Interested candidates who wish to apply for the advertised position, please click APPLY NOW or email an updated copy of your resume/cv. We regret that only shortlisted candidate will be notified.

Email address: [email protected]

Recruitpedia Pte. Ltd.

EA License No. 19C9682
EA Reg. No. R22108850 (Chan Mun Mun)

The Job

• Perform installation, maintenance, troubleshooting and repair of machines / equipment.

• Carry out maintenance work in accordance with the maintenance schedule and update all daily, monthly and yearly maintenance checklists accurately.

Requirements:

· Diploma in Mechanical / Mechatronics / Electrical Engineering

Good Pay + Good allowance + Good Bonus

Interested candidates please send an updated Resume / CV in Ms Word format to WhatsApp’s your resume to 98332779 ( no Calls)

Consultant in-charge : Quah Li Lian (Lilian) ( Registration No: R1983286 )

Our client is from Oil and Gas industry. They are looking for a Electrical & Control Maintenance Supervisor to assist their team for the next phase of their business. They are located in West.

Duties:

• Lead and supervise electrical technicians and contractors in system installation, maintenance, and repair.
• Develop and conduct on-the-job training programs for E&I team members.
• Perform site inspections and quality control for electrical work.
• Review and approve electrical isolation, excavation, and related permits.
• Investigate electrical maintenance issues, identify root causes, and implement solutions.
• Collaborate with other engineers to ensure equipment reliability through effective maintenance programs.

Requirements:

• Minimum Bachelors Degree in Electrical Engineering or any relevant field.
• Minimum 8 to 12 years experience in Oil and Gas Industry or any relevant industry.

Interested candidates who wish to apply for the advertised position, please click APPLY NOW or email an updated copy of your resume/cv. We regret that only shortlisted candidate will be notified.

Email address: [email protected]

Recruitpedia Pte. Ltd.

EA License No. 19C9682
EA Reg. No. R22108850 (Chan Mun Mun)

Job Description

• Troubleshooting of production process and initiate process improvement activities.
• Work closely with Plant Manager & Planning Manager to ensure smooth implementation of special project assigned by Deputy Factory Manager.
• Co-ordinate with Plant Manager in the maintenance of respective plant equipment.
• Ensure smooth and safe operation in Plant operations.
• Training of operational staff.
• Investigate, identify and implement corrective actions to recurrent deviations from process norm.
• Initiate and recommend improvement to plant process.
• Plan and ensure proper implementation of plant maintenance activities.
• Liaise with external vendors and contractors where necessary.
• Assist the Plant Manager to re-verify the integrity after the maintenance of equipment.
• Perform regular plant safety inspection.
• Execute Deputy Factory Manager's instruction in the implementation of a special project.
• Issue and approve the permit to work systems.
• Conduct training to operational staff as per the department's training program.
• Ensure that all risk assessments in the workplace are established, implemented, monitored, communicated and documented according to WSH (Risk Management) requirements.
• Any other duties assigned by Deputy Factory Manager.

Requirements

• Candidate must possess at least Degree in Chemical or Mechanical Engineering.
• Minimum 3 years of process engineering experience in edible oils and fats industry.

Our client is from Oil and Gas industry. They are looking for a Maintenance Scheduler (E&I) to assist their team for the next phase of their business. They are located in West.

Duties:

• Plan and schedule daily maintenance tasks for Electrical & Control assets.
• Coordinate with Mechanical, HSSE, Production, and Jetty Operations teams on work requests and permits.
• Liaise with authorities for natural gas equipment maintenance approvals.
• Coordinate with external vendors and contractors for site surveys and work execution.
• Ensure validity of Method of Statement and risk assessments.

Requirements:

• Minimum Bachelors Degree in Electrical Engineering or any relevant field.
• Minimum 5 to 8 years of E&I experience in Oil and Gas Industry or any relevant industry.

Interested candidates who wish to apply for the advertised position, please click APPLY NOW or email an updated copy of your resume/cv. We regret that only shortlisted candidate will be notified.

Email address: [email protected]

Recruitpedia Pte. Ltd.

EA License No. 19C9682
EA Reg. No. R22108850 (Chan Mun Mun)

Job Description:

• To ensure given KPI are met timely and effectively
• Providing administrative, planning, organising, controlling, discipline and training functions of his departments.
• General administration, supervision and control of Supervisor and staff under the department
• Follow up with customer’ vendor and./or authorities for required task to be performed/ supported
• Co-ordinating with other sections and departments to ensure equipment are released from operation for maintenance.
• Ensuring that safety rules and regulations are complied with.
• Ensuring all mechanics are adequately trained and have refresher training.
• Ensuring that work is performed as planned or scheduled and to meet all daily/ preventive maintenance
• Ensuring the upkeep of his department’s equipment, tools and vehicles.
• Raise Asset Disposal Application (ADA) for unserviceable equipment and follow up on the update the inventory list.
• Ensure sufficient tools/ special tooling and spares are required for maintenance and ensure PR is raised and follow up if required
• Coordinate the purchase of new equipment for SIAEC.
• Ensure new Ground Support Equipment are inducted through the correct process.
• Highlight and Coordinate with GSE in-charged for other necessary matters.
• Such other duties as assigned to him by the Ops Manager

Job Requirement:

• Diploma / Degree in Engineering/ Aviation/ Mechanical or related field
• Minimum 2 years experience in Operations/ Aviation
• Proficiency in Excel/ Words/ Point and any other will be an advantage
• State Class 3 driving license for Airside Driving

Lead/Manager - Supply Chain Automation Maintenance

This role leads automation maintenance team in conducting regular preventive and predictive maintenance on storage systems, equipment, and packaging machines. This role will focus on maintaining and enhancing existing automation capabilities while developing a skilled team of automation and maintenance technicians.

Responsibilities

• Oversee the modification of robotic and automation systems by the automation team.
• Guide technicians in diagnosing and repairing complex logistics and packaging equipment malfunctions.
• Lead efforts to identify root causes of failures using statistical methods and recommend design, tolerance, or process adjustments.
• Collaborate closely with operations teams to ensure all automation equipment and processes meet safety standards and align with company policies.
• Compile reports on system performance and breakdowns from shift engineers and field technicians for management review.
• Partner with the IT team and storage system vendors to swiftly resolve system disruptions.
• Ensure seamless project handover to the Operations team upon completion and provide support to other functions as needed.
• Lead the team in developing work instructions, safety risk assessments, and Continuous Improvement projects.
• Ability to analyze process flows to identify and mitigate bottlenecks, collaborating with operations for proactive solutions.

Qualifications

• Bachelor's Degree in Electrical & Electronic, Mechatronics, Mechanical, Industrial Engineering, or related field.
• Over 4 years' experience in maintaining automation systems.
• Demonstrated experience in end-to-end project implementation for Robotics and Industrial Engineering.
• Knowledge of Automatic Storage and Retrieval Systems, Warehouse control systems & Integration software is advantageous.
• Proven ability to influence senior leadership teams and collaborate effectively across all levels.
• Strong negotiation and vendor management skills.
• Exceptional analytical and problem-solving abilities.
• Excellent written, presentation, and verbal communication skills.

Office Location: West, Singapore

Interested candidates kindly forward your CV to [email protected] (Jo Cheng I-tien, Reg No: R23116744). Feel free to forward this great opportunity to someone who would be a great fit for this role.

All information will be kept strictly confidential. We regret to inform that only successful applicants will be contacted.

PeopleSearch Pte Ltd

EA License No: 16S8057