Job Description:

• Perform repair processes such as plasma spray, water jet, shot peening, heat treatment, cleaning, masking, blasting, sheetmetal etc
• Meet repair production schedule and delivery requirements
• Participate in cost control initiatives and continuous improvement projects/events
• Any other duties as assigned

Requirements:

• NITEC or equivalent, preferably with experiences in the component overhaul/repair industry
• Knowledge and skills in any repair process, e.g. plasma spray, water jet, shot-peening, heat treatment etc
• Able to perform rotating shift work, and support overtime, if required

Responsibilities:

• Perform troubleshooting, assist in investigation and resolving production issues
• Identify and implement continuous process improvement and cost control initiatives
• Trending for process parameters
• Manage capability setup for new equipment and processes
• Carry out tolling review and control and submission of capability declaration
• Handle proper documentation for publication review, worksheet amendments and in-house specifications amendments
• Provide technical support to Operations, ensuring productivity efficiency
• Review, investigate and provide solutions to issues raised by Operation
• Carry out training on repair processes and any other related practices

Requirements:

• Degree or equivalent, preferably with experiences in propulsion engines and components MRO facility
• Ability to interpret engineering drawings
• Prior experience in repair processes will be an added advantage
• Familiar with NDT requirements and FAA 45 /EASA 145 regulations

What’s the role?

You will manage SJI (Shell Jurong Island) maintenance proactive and reactive jobs and coordinate integrated schedule with Production and stakeholders to produce a resource-optimised maintenance execution baseline plan.

The Scheduler is responsible for integrated scheduling maintenance activities in SJI production units including construction and non-routine maintenance.

Principal Accountabilities

• Compliance to HSSE standards and requirements to make SJI a safe place to work, and accountable for all assigned Critical activities
• Perform Authorised Applicant/Authorised Engineer as per SJI Permit to Work (PTW) requirement.
• Drive high standard of personal accountability & performance to deliver the Site & Department goals and target.
• Active participation in ISO & all maintenance related internal and external audits/surveys.
• Accountable to perform assigned Critical activities per Process Safety requirements (Hazard Effect Management Process (HEMP), Instrument Protective Function (IPF)/ Instrument Safe Guarding System, etc) are executed as planned.
• Controller of all SJI in-house contractor resources.
• Ensure optimum contractor resource utilisation.
• Accountable to deliver/publish optimal daily and weekly work schedules to the relevant stakeholders.
• Chair daily maintenance activities schedule meeting to provide progress update & look ahead resource planning/scheduling.
• Ensure preventive maintenance work schedules are developed for equipment and clusters of equipment in a contiguous manner.
• Ensure timely update of work schedule based on the occurrence of reactive work orders, emergency work, schedule breakers, unplanned shutdown, and pit-stops.
• Determine actual level of resources available with respect to projected level of resources available and its impact on work schedule. Develop work schedule based on work order backlog that is optimised to the existing resources available.
• Track and update schedule changes due to interruptions of emergency & schedule breaker work orders.
• Track & monitor both proactive and reactive work orders are timely scheduled before the due date.
• Ensure the integrated schedule is reviewed regularly based on actual field execution and inform planners to revise/update the equipment task list accordingly.
• Monitor the level of work order backlog for scheduling in relation to the availability of resources and recommend improvement plans.
• Link individual Activities to Resource id in the schedule for tracking, monitoring and optimise contractor resources.
• Forecast integrated resources requirements based on 90days look ahead meeting.
• Tracking of related Maintenance Department KPIs and recommend necessary actions to improve them.
• Contribute and participate actively in site cost improvements.
• Improve effectiveness of maintenance scheduling e.g., bundling of Preventive Maintenance (PM) and Corrective Maintenance (CM) to lean out the schedule and optimise the resources.
• Work with Production to ensure AMS work processes are executed as designed and are delivering results, e.g., ensure compliance with ME - Integrate Maintenance Schedule RP and other Shell Group business objectives.
• Share Scheduling best practices across SJI operating units. Protect Hard and soft week schedule.
• Coordinate with Operation Maintenance Coordinator (OMC), Production teams, Plant Engineers, Contractors, workshop, and other supporting functions to ensure the routine maintenance / non-routine maintenance work schedule is optimal, realistic, and executable.
• Critical Activities - Ensure planned inspection/ PMs are carried out according to schedule defined in GSAP to provide that it maintains the original functionality e.g., electrical equipment.
• Critical Activities - Follow all Maintenance department critical procedures. Plan & Schedule the PM for HEMP Critical Equipment according to documented GSAP interval. Plan & Schedule repair in response to GSAP notification in order of priority defined by GAME ME Prioritisation Tool.
• Critical Activities - Ensure safety & emergency equipment is always maintained via adequate PM as per schedule and plan and available for use.
• Identify waste elimination and LEAN maintenance opportunities for maintenance, and work with relevant key stakeholders to implement gap closure plans.
• Use Computerised Maintenance Management System (CMMS) in compliance with the global maintenance and business processes.
• Perform standby duty coverage for own engineering discipline. Carrying out any other related duties as required.

Decision-Making

• Resolve conflicting resource requirements to ensure the development of an optimised work schedule.
• Evaluate and determine the optimal level of resources required on site.
• Rearrange the schedule of maintenance activities due to Emergency and Schedule Breaker (E & SB) priority emergence work or bundling the schedule for equipment within the same process unit/system.
• Re-arranging the schedule of preventive maintenance activities to take advantage of the occurrence of reactive maintenance work orders, unplanned unit shutdown and pit-stops.

You will thrive in the following:

• Ensuring timely development of optimised work schedules.
• Ensuring work order priority conflicts are resolved.
• Determination of optimum level of resources.
• Ensuring that all members can contribute and create opportunities for improvement and individual development.
• Inculcating HSSE as personal value for self and direct reports.
• Improving site reliability UPDT per global target.
• Implementing best practices from other sites and externally to bring value to the site.
• Demonstrating leadership attributes in areas of authenticity, growth, collaboration, and performance.
• Retention of critical knowledge within the team.

What we need from you

We are keen to speak to individuals with as many of the following:

• Degree/Diploma in Mechanical Engineering, or Trade Certificate with professional experience.
• At least 3 years relevant experience as plant engineer or equivalent.
• In-depth knowledge in: HSE Performance management, Risk Management, sustaining Process Unit reliability and integrity, Plant Operations & Business Operations, Commercial & contractual development and implementation, and cost & budget control.
• Demonstrated Skill in planning and compiling Maintenance & Integrate Activity Schedule, and championing Customer Focus.
• With experience in the use of PrimaVera P6 and other Process Technology.
• Builds shared vision, demonstrates courage in managing change; motivates, coaches, and develops the team.

• Bread Manufacturing
• Basic $6500 - $8000
• AWS + Variable Bonus
• 5 Days (Office Hours)
• Location: Clementi area

Responsibilities

• Lead a team of engineering supervisors and shift engineers to diagnose mechanical and electrical breakdowns, assessing the best course of action and conducting a root cause investigation to eliminate the likelihood of re- occurrence.
• Project lead for all installations, overhaul of equipment and plant, working with suppliers to ensure they deliver on time, on budget and with minimum disruption
• Lead the implementation of a factory wide PM system using the current Process Control System, and ensuring PM activity is carried out during factory downtime at the correct frequency to an agreed standard.
• Effective manage an Engineering team including performance management, training and development
• Ensure that all projects are engineered to scope, budget and relevant standard and regulatory compliance.
• Fulfilling a key role within part of the site management team, being fully accountable and reporting on assets and ancillary plant downtime across site.
• Lead all on site preventative maintenance activities.
• Budgetary management/control, responsibility for the day to day management of the site repair and maintenance budgets
• Implement safe systems work and managing 3rd party site engineering works, liaising with the operations team to ensure that plant critical repairs minimize plant disruption or managed out of hours.
• Upholding GMP engineering standards across site, 3rd party technical customer audits & statutory inspections are passed any non-conformances are closed out with root cause analysis to avoid repeat failure.
• Continuous improvement of engineering ways of working to ensure improved equipment performance. A six sigma qualification would be desirable but not essential however knowledge of continuous tools and techniques is essential
• Lead the implementation of autonomous maintenance deployment process across the site.
• Responsible for maintaining and improvement of all engineering assets and developing an asset care strategy
• Setup an effective Engineering planning function, leading the development of Job Libraries and codifying repair

Requirements

• Degree in Mechanical or Electrical Engineering
• Minimum 5 year's management experience in engineering, project and maintenance management within food manufacturing industry.
• Demonstrates understanding of project management and engineering from a technical and operational point of view
• Strong analytical, problem-solving and decision-making skills
• Excellent planning, organizational skills and sense of urgency
• Background of hands-on experiences from new line installation project and/or focus improvement project will be advantageous

For consideration, kindly submit your CV by clicking “APPLY Now”

**Only shortlisted candidate would be notified**

EA Reg. No: R1873990 | Lucky Lee Ding Cong

• Specialising in Facilities Maintenance
• Candidate must possess at least Diploma/Advanced/Higher/Graduate Diploma in Facilities Management, Building Services, Engineering (Civil, Mechanical or Electrical) or equivalent.
• At least 5 Years of working experience in the related field is required for Executive position and at least 10 Years for Manager position.
• Required Skill(s): Microsoft Office
• Preferably Senior Executive specialized in Engineering - Civil/Construction/M&E/Facilities Maintenance or equivalent.
• Preferably candidates with valid Class 3 Driving License (M)

• Specialising in Facilities Maintenance
• Candidate must possess at least Diploma/Advanced/Higher/Graduate Diploma in Facilities Management, Building Services, Engineering (Civil, Mechanical or Electrical) or equivalent.
• At least 5 Years of working experience in the related field is required for Executive position and at least 10 Years for Manager position.
• Required Skill(s): Microsoft Office
• Preferably Senior Executive specialized in Engineering - Civil/Construction/M&E/Facilities Maintenance or equivalent.
• Preferably candidates with valid Class 3 Driving License (M)

Responsibilities

• Responsible for performing preventive maintenance and calibration of the machines according to the checklist
• Responsible in analysing machine problems and repair
• Responsible for updating and maintaining maintenance records and forms regularly

Requirements

• Min Nitec in Electrical Engineering
• Min 2 years of working experience in maintenance and repair of CNC metal cutting machines
• Knowledge in PLC will be advantage

Please kindly email your resume in Ms Word to [email protected]

We regret to inform that only shortlisted candidates would be notified.

Registration Number: R1328870

EA License No. 22C1026

Responsibilities

• Responsible for performing preventive maintenance and calibration of the machines according to the checklist
• Responsible in analysing machine problems and repair
• Responsible for updating and maintaining maintenance records and forms regularly

Requirements

• Min Nitec in Electrical Engineering
• Min 2 years of working experience in maintenance and repair of CNC metal cutting machines
• Knowledge in PLC will be advantage

Please kindly email your resume in Ms Word to [email protected]

We regret to inform that only shortlisted candidates would be notified.

Registration Number: R1328870

EA License No. 22C1026

Responsibilities

• Responsible for performing preventive maintenance and calibration of the machines according to the checklist
• Responsible in analysing machine problems and repair
• Responsible for updating and maintaining maintenance records and forms regularly

Requirements

• Min Nitec in Electrical Engineering
• Min 2 years of working experience in maintenance and repair of CNC metal cutting machines
• Knowledge in PLC will be advantage

Please kindly email your resume in Ms Word to [email protected]

We regret to inform that only shortlisted candidates would be notified.

Registration Number: R1328870

EA License No. 22C1026

Responsibilities

• Responsible for performing preventive maintenance and calibration of the machines according to the checklist
• Responsible in analysing machine problems and repair
• Responsible for updating and maintaining maintenance records and forms regularly

Requirements

• Min Nitec in Electrical Engineering
• Min 2 years of working experience in maintenance and repair of CNC metal cutting machines
• Knowledge in PLC will be advantage

Please kindly email your resume in Ms Word to [email protected]

We regret to inform that only shortlisted candidates would be notified.

Registration Number: R1328870

EA License No. 22C1026

Responsibilities

• Responsible for performing preventive maintenance and calibration of the machines according to the checklist
• Responsible in analysing machine problems and repair
• Responsible for updating and maintaining maintenance records and forms regularly

Requirements

• Min Nitec in Electrical Engineering
• Min 2 years of working experience in maintenance and repair of CNC metal cutting machines
• Knowledge in PLC will be advantage

Please kindly email your resume in Ms Word to [email protected]

We regret to inform that only shortlisted candidates would be notified.

Registration Number: R1328870

EA License No. 22C1026

Responsibilities

• Responsible for performing preventive maintenance and calibration of the machines according to the checklist
• Responsible in analysing machine problems and repair
• Responsible for updating and maintaining maintenance records and forms regularly

Requirements

• Min Nitec in Electrical Engineering
• Min 2 years of working experience in maintenance and repair of CNC metal cutting machines
• Knowledge in PLC will be advantage

Please kindly email your resume in Ms Word to [email protected]

We regret to inform that only shortlisted candidates would be notified.

Registration Number: R1328870

EA License No. 22C1026

Responsibilities

• Responsible for performing preventive maintenance and calibration of the machines according to the checklist
• Responsible in analysing machine problems and repair
• Responsible for updating and maintaining maintenance records and forms regularly

Requirements

• Min Nitec in Electrical Engineering
• Min 2 years of working experience in maintenance and repair of CNC metal cutting machines
• Knowledge in PLC will be advantage

Please kindly email your resume in Ms Word to [email protected]

We regret to inform that only shortlisted candidates would be notified.

Registration Number: R1328870

EA License No. 22C1026

Responsibilities

• Responsible for performing preventive maintenance and calibration of the machines according to the checklist
• Responsible in analysing machine problems and repair
• Responsible for updating and maintaining maintenance records and forms regularly

Requirements

• Min Nitec in Electrical Engineering
• Min 2 years of working experience in maintenance and repair of CNC metal cutting machines
• Knowledge in PLC will be advantage

Please kindly email your resume in Ms Word to [email protected]

We regret to inform that only shortlisted candidates would be notified.

Registration Number: R1328870

EA License No. 22C1026

Meranti Power Pte. Ltd., a fully owned subsidiary of Energy Market Authority, is establishing a maintenance team to maintain two open cycle gas turbines of our power generation station.

We are inviting applicants for the positions of Technical Officer (Mechanical) who shall report to the Senior Engineer (Mechanical Maintenance) and be responsible for supporting him in the maintenance of mechanical systems of the power station/plants. The Technical Officer shall support Mechanical team in the following:

Responsibilities:

• Responsible for proper maintenance of gas turbine, generator and auxiliary systems as assigned by Head or Engineers in-charge.
• Perform troubleshooting, predictive, preventive and corrective maintenance to ensure plant equipment and systems run smoothly and efficiently
• Identify, plan and initiate required actions to maintain the power plants for long term reliability and efficient generation output.
• Prepare technical specifications for equipment services, contract labour and ad-hoc maintenance services. Supervise and report performance of contractors to ensure good quality and progress of maintenance works, as well as full compliance with contract specifications.
• Liaise, supervise, and coordinate with contractors and vendors on projects, maintenance, repair, shut down, and overhaul works
• Support operation and maintenance engineers in investigation, analyse and determine the root cause of plant defects and outages.
• Maintain and control all records as required.
• Assist in the preparation, certification and review of all management systems, including ISO 9001, ISO 14001, ISO 18001, ISO 50001 annually and provide support to the auditing parties wherever necessary, including internal & external auditors, to rectify non compliances and/or to follow up on improvement items identified during audit.
• Support engineers in managing maintenance contracts and inspections, testing and commissioning of new equipment.
• Monitor ad-hoc plant projects/tasks to ensure on time delivery.
• Perform work orders allocated by Department Heads and/or Engineers

Requirements:

• Education in Mechanical Engineering
• Minimum 2 years’ Mechanical maintenance experience in a power plant
• Willing to work overtime
• Self-driven with good working attitude and possess keen learning disposition
• Proven attendance record and works well in a team
• Work location is in Jurong Island (Transport to and from Jurong East MRT are provided)

Only shortlisted candidates will be notified.

By submitting your personal data and/or resume to Meranti Power Pte. Ltd. (“MP”), you shall be deemed to have given your consent to MP for collecting, using, and disclosing your personal data for the purpose of assessing your job application.

Job Title: Technical Specialist (Assembly / Inspector / Repair / Machinist / Welder)) (ID4544)
Location: Paya Lebah
Working Hours: Mon to Fri 8.00am-5.30pm
Salary: $2500-$3000


Component Repair
Job Description:
• Perform repair processes such as plasma spray, water jet, shot peening, heat treatment, cleaning, masking, blasting, sheetmetal etc
• Meet repair production schedule and delivery requirements
• Participate in cost control initiatives and continuous improvement projects/events
• Any other duties as assigned

Requirements:
• NITEC or equivalent, preferably with experiences in the component overhaul/repair industry
• Knowledge and skills in any repair process, e.g. plasma spray, water jet, shot-peening, heat treatment etc
• Able to perform rotating shift work, and support overtime, if required

Assembly
Purpose of the Job

Assembly, Inspection and Disassembly of Gas Turbine Engines and Components
Rigging and Testing of Gas Turbine Engines

Key Job Accountabilities:

1. Strip, build, inspect, assemble and test gas turbine engines
2. Perform work at cell level to meet production schedule and cost control for engines jobs
3. Perform Engine Rigging and De-rigging, Engine Functional and Performance Testing, Troubleshooting
4. Handle and maintain facilities, test cells and equipment, setup & tooling design/ modification
5. Participate in process improvement and drive productivity

Reporting Relationships:

This position reports to Production Manager, Military Operations
Required Experience and Qualifications:

1. Minimum NITEC in engineering discipline. Mechanical & Aerospace disciplines will be preferred
2. Past MRO or Aviation experience would be an advantage
3. Past experience with Engine Testing would be an advantage
4. Possess good communication skills
5. Energetic and willing to learn
6. Team player but also independent worker
7. Leadership skills is a plus

Other Requirements to Note

1. Singaporeans are required for this position. Country of Birth needs to be stipulated for review
2. Military Security Department (MSD) Cat 2 Clearance is required for this position


Machinist

Responsibilties:
• Responsible for set up and operate CNC & NC Machine according to production schedule and meet all specification requirement.
• Perform simple trouble shooting, basic daily machine maintenance and maintaining 6S housekeeping.
• Read, interpret & execute various machining works using CNC and NC vertical/ horizontal lathe involving milling, turning and grinding per the engine manual requirements.
• Meet tight and demanding repair production schedule & delivery requirements.
• Suggest new tooling design & modification to existing tooling when required.
• Participate in cost control initiatives & continuous improvement projects/ events.
• Perform other duties as assigned

Requirement:
• Minimum NITEC or equivalent qualification.
• Minimum 3 years of working experience in aviation repair involving CNC & conventional machining (milling, turning and grinding).
• Able to work rotating shifts.
• Proactive to cross-training and multi-tasking.
• On the job training will be provided.


Welder

Responsibilities:
• Perform weld repair and assembles of aircraft components with gas tungsten arc welding/ tungsten inert gas processes.
• Ability to use of measuring instruments such as gauge blocks, height gauges, dial indicators and callipers to examine components.
• Perform various jobs such as cutting, grinding, sheet metal and assembly works with hand or power tools which include portable riveting guns, squeezers, abrasive tools and torque wrenches.
• Meet tight and demanding repair production schedule & delivery requirements.
• Suggest new tooling design & modification to existing tooling when required.
• Participate in cost control initiatives & continuous improvement projects/ events.
• Perform other duties as assigned


Inspector


Purpose of the Job

Inspection of Gas Turbine Engines and Engine Components
Key Job Accountabilities:

1. Carry out visual, dimensional and detailed inspection of gas turbine engines and its components
2. Perform work at cell level to meet production schedule and cost control for engines jobs
3. Handle facilities and equipment setup & tooling design/ modification
4. Participate in process improvements and drive productivity

Reporting Relationships:

This position reports to Production Manager, Military Operations
Required Experience and Qualifications:

1. Minimum NITEC in engineering discipline. Mechanical & Aerospace disciplines will be preferred
2. Past MRO or Aviation experience would be an advantage
3. Possess good communication skills
4. Energetic and willing to learn
5. Team player but also independent worker
6. Leadership skills is a plus

Responsibilities

• Responsible for performing preventive maintenance and calibration of the machines according to the checklist
• Responsible in analysing machine problems and repair
• Responsible for updating and maintaining maintenance records and forms regularly

Requirements

• Min Nitec in Electrical Engineering
• Min 2 years of working experience in maintenance and repair of CNC metal cutting machines
• Knowledge in PLC will be advantage

Please kindly email your resume in Ms Word to [email protected]

We regret to inform that only shortlisted candidates would be notified.

Registration Number: R1328870

EA License No. 22C1026

Responsibilities

• Responsible for performing preventive maintenance and calibration of the machines according to the checklist
• Responsible in analysing machine problems and repair
• Responsible for updating and maintaining maintenance records and forms regularly

Requirements

• Min Nitec in Electrical Engineering
• Min 2 years of working experience in maintenance and repair of CNC metal cutting machines
• Knowledge in PLC will be advantage

Please kindly email your resume in Ms Word to [email protected]

We regret to inform that only shortlisted candidates would be notified.

Registration Number: R1328870

EA License No. 22C1026

Responsibilities

• Responsible for performing preventive maintenance and calibration of the machines according to the checklist
• Responsible in analysing machine problems and repair
• Responsible for updating and maintaining maintenance records and forms regularly

Requirements

• Min Nitec in Electrical Engineering
• Min 2 years of working experience in maintenance and repair of CNC metal cutting machines
• Knowledge in PLC will be advantage

Please kindly email your resume in Ms Word to [email protected]

We regret to inform that only shortlisted candidates would be notified.

Registration Number: R1328870

EA License No. 22C1026

COMPANY DESCRIPTION

Mediacorp is Singapores largest content creator and national media network, operating a suite of TV channels, radio stations, and multiple digital platforms. Its mission is to engage, entertain, and enrich audiences by harnessing the power of creativity.

We are committed to creating an inclusive and diverse workplace where talent thrives. Our hiring decisions are made based on merit and fit-to-role. If you have a disability or special need which requires accommodation to participate in the recruitment process, please inform us when you submit your online application. We will be happy to support as necessary.

Thank you for your interest and application to this role. Please note that only short-listed candidates will be contacted.

RESPONSIBILITIES

Key responsibilities

• Provide operational and maintenance support for Satellite Broadcast Service.
• Knowledge of Satellite Transmission (i.e. Solid State Power Amplifier (SSPA)/BUC, Satellite modulator, Integrated Receiver Decoders (IRDs) or Satellite Headend (i.e. Video Encoder, Multiplexer)
• Perform equipment/system configurations, Video switching, IP routing and monitoring of Radio Frequency (RF) & Video signals for Broadcast production and operation.
• Perform Satellite uplink and downlink configurations.
• Perform RF equipment/system preventive and corrective maintenance
• Perform Broadcast equipment/system preventive and corrective maintenance
• Perform IP broadcast network configurations and maintenance.
• Resolve technical issues and to provide periodic/planned preventive & corrective maintenance.

• 4 years of experience required in relevant industries.
• Degree in Electronics/Computer Engineering or any related discipline.
• Knowledge in network and video transport technologies.
• Knowledge in audio, video and broadcasting system.
• Able to work independently, as well as in a team.
• Willingness to take on new challenges.

COMPANY DESCRIPTION

Mediacorp is Singapores largest content creator and national media network, operating a suite of TV channels, radio stations, and multiple digital platforms. Its mission is to engage, entertain, and enrich audiences by harnessing the power of creativity.

We are committed to creating an inclusive and diverse workplace where talent thrives. Our hiring decisions are made based on merit and fit-to-role. If you have a disability or special need which requires accommodation to participate in the recruitment process, please inform us when you submit your online application. We will be happy to support as necessary.

Thank you for your interest and application to this role. Please note that only short-listed candidates will be contacted.

RESPONSIBILITIES

Key responsibilities

• Provide operational and maintenance support for Satellite Broadcast Service.
• Knowledge of Satellite Transmission (i.e. Solid State Power Amplifier (SSPA)/BUC, Satellite modulator, Integrated Receiver Decoders (IRDs) or Satellite Headend (i.e. Video Encoder, Multiplexer)
• Perform equipment/system configurations, Video switching, IP routing and monitoring of Radio Frequency (RF) & Video signals for Broadcast production and operation.
• Perform Satellite uplink and downlink configurations.
• Perform RF equipment/system preventive and corrective maintenance
• Perform Broadcast equipment/system preventive and corrective maintenance
• Perform IP broadcast network configurations and maintenance.
• Resolve technical issues and to provide periodic/planned preventive & corrective maintenance.

• 4 years of experience required in relevant industries.
• Degree in Electronics/Computer Engineering or any related discipline.
• Knowledge in network and video transport technologies.
• Knowledge in audio, video and broadcasting system.
• Able to work independently, as well as in a team.
• Willingness to take on new challenges.

Responsibilities

• Responsible for performing preventive maintenance and calibration of the machines according to the checklist
• Responsible in analysing machine problems and repair
• Responsible for updating and maintaining maintenance records and forms regularly

Requirements

• Min Nitec in Electrical Engineering
• Min 2 years of working experience in maintenance and repair of CNC metal cutting machines
• Knowledge in PLC will be advantage

Please kindly email your resume in Ms Word to [email protected]

We regret to inform that only shortlisted candidates would be notified.

Registration Number: R1328870

EA License No. 22C1026

The technician to be trained to perform basic on-line leak sealing of pipeline components, report directly to the operation manager during the on-job training (OJT) period. Trainee technician will be sent to attend Safety Course and trained to work in the Petrochemical OEM environment in Jurong Island or mainland Utilities, Pharmaceutical and the general manufacturing industries.

Job Title: Assistant Manager (Maintenance & Facilities) (ID3390)
Location: Changi
Working Hours: 5days work , Mon-Fri 8:30am-6:00pm
Salary: Up to $5500

Job Description:
• Responsible for the planning and execution of routine/shutdown, preventive maintenance of the plant’s process instrumentation, control value, electrical power/distribution system equipment etc to achieve reliability target. Responsible for Energy saving initiatives
• Responsible for facilities management and supervising maintenance & facility team
• Supervise and ensure E & I works, installation and calibration activities are completed in accordance to the company’s guidelines and environmental, health and safety standards
• Ensure data collection and preparation of all reports for efficiency analysis and maintenance
• Maintain GMP & GDP for specification data sheets, drawings, spare parts, ISO and customer audits
• Provide leadership and guidance to overall management off the manufacturing site’s environment, health and safety compliance that are critical to well-being and protection of employees and contractors
• Responsible for the planning of maintenance & facilities budget
• Manage Site, Regional & Global Projects/Initiatives as assigned
• Any other duties as and when assigned by superior from time to time

Requirements:
• GCE ‘O’ Level or equivalent
• Experience in manufacturing environment
• Experience in maintenance and facilities management.
• Physical fit
• Detailed oriented and able to perform multi-tasking
• Excellent quality mindset
• Good team player

Responsibilities

• Responsible for performing preventive maintenance and calibration of the machines according to the checklist
• Responsible in analysing machine problems and repair
• Responsible for updating and maintaining maintenance records and forms regularly

Requirements

• Min Nitec in Electrical Engineering
• Min 2 years of working experience in maintenance and repair of CNC metal cutting machines
• Knowledge in PLC will be advantage

Please kindly email your resume in Ms Word to [email protected]

We regret to inform that only shortlisted candidates would be notified.

Registration Number: R1328870

EA License No. 22C1026