What’s the role?

You will manage SJI (Shell Jurong Island) maintenance proactive and reactive jobs and coordinate integrated schedule with Production and stakeholders to produce a resource-optimised maintenance execution baseline plan.

The Scheduler is responsible for integrated scheduling maintenance activities in SJI production units including construction and non-routine maintenance.

Principal Accountabilities

• Compliance to HSSE standards and requirements to make SJI a safe place to work, and accountable for all assigned Critical activities
• Perform Authorised Applicant/Authorised Engineer as per SJI Permit to Work (PTW) requirement.
• Drive high standard of personal accountability & performance to deliver the Site & Department goals and target.
• Active participation in ISO & all maintenance related internal and external audits/surveys.
• Accountable to perform assigned Critical activities per Process Safety requirements (Hazard Effect Management Process (HEMP), Instrument Protective Function (IPF)/ Instrument Safe Guarding System, etc) are executed as planned.
• Controller of all SJI in-house contractor resources.
• Ensure optimum contractor resource utilisation.
• Accountable to deliver/publish optimal daily and weekly work schedules to the relevant stakeholders.
• Chair daily maintenance activities schedule meeting to provide progress update & look ahead resource planning/scheduling.
• Ensure preventive maintenance work schedules are developed for equipment and clusters of equipment in a contiguous manner.
• Ensure timely update of work schedule based on the occurrence of reactive work orders, emergency work, schedule breakers, unplanned shutdown, and pit-stops.
• Determine actual level of resources available with respect to projected level of resources available and its impact on work schedule. Develop work schedule based on work order backlog that is optimised to the existing resources available.
• Track and update schedule changes due to interruptions of emergency & schedule breaker work orders.
• Track & monitor both proactive and reactive work orders are timely scheduled before the due date.
• Ensure the integrated schedule is reviewed regularly based on actual field execution and inform planners to revise/update the equipment task list accordingly.
• Monitor the level of work order backlog for scheduling in relation to the availability of resources and recommend improvement plans.
• Link individual Activities to Resource id in the schedule for tracking, monitoring and optimise contractor resources.
• Forecast integrated resources requirements based on 90days look ahead meeting.
• Tracking of related Maintenance Department KPIs and recommend necessary actions to improve them.
• Contribute and participate actively in site cost improvements.
• Improve effectiveness of maintenance scheduling e.g., bundling of Preventive Maintenance (PM) and Corrective Maintenance (CM) to lean out the schedule and optimise the resources.
• Work with Production to ensure AMS work processes are executed as designed and are delivering results, e.g., ensure compliance with ME - Integrate Maintenance Schedule RP and other Shell Group business objectives.
• Share Scheduling best practices across SJI operating units. Protect Hard and soft week schedule.
• Coordinate with Operation Maintenance Coordinator (OMC), Production teams, Plant Engineers, Contractors, workshop, and other supporting functions to ensure the routine maintenance / non-routine maintenance work schedule is optimal, realistic, and executable.
• Critical Activities - Ensure planned inspection/ PMs are carried out according to schedule defined in GSAP to provide that it maintains the original functionality e.g., electrical equipment.
• Critical Activities - Follow all Maintenance department critical procedures. Plan & Schedule the PM for HEMP Critical Equipment according to documented GSAP interval. Plan & Schedule repair in response to GSAP notification in order of priority defined by GAME ME Prioritisation Tool.
• Critical Activities - Ensure safety & emergency equipment is always maintained via adequate PM as per schedule and plan and available for use.
• Identify waste elimination and LEAN maintenance opportunities for maintenance, and work with relevant key stakeholders to implement gap closure plans.
• Use Computerised Maintenance Management System (CMMS) in compliance with the global maintenance and business processes.
• Perform standby duty coverage for own engineering discipline. Carrying out any other related duties as required.

Decision-Making

• Resolve conflicting resource requirements to ensure the development of an optimised work schedule.
• Evaluate and determine the optimal level of resources required on site.
• Rearrange the schedule of maintenance activities due to Emergency and Schedule Breaker (E & SB) priority emergence work or bundling the schedule for equipment within the same process unit/system.
• Re-arranging the schedule of preventive maintenance activities to take advantage of the occurrence of reactive maintenance work orders, unplanned unit shutdown and pit-stops.

You will thrive in the following:

• Ensuring timely development of optimised work schedules.
• Ensuring work order priority conflicts are resolved.
• Determination of optimum level of resources.
• Ensuring that all members can contribute and create opportunities for improvement and individual development.
• Inculcating HSSE as personal value for self and direct reports.
• Improving site reliability UPDT per global target.
• Implementing best practices from other sites and externally to bring value to the site.
• Demonstrating leadership attributes in areas of authenticity, growth, collaboration, and performance.
• Retention of critical knowledge within the team.

What we need from you

We are keen to speak to individuals with as many of the following:

• Degree/Diploma in Mechanical Engineering, or Trade Certificate with professional experience.
• At least 3 years relevant experience as plant engineer or equivalent.
• In-depth knowledge in: HSE Performance management, Risk Management, sustaining Process Unit reliability and integrity, Plant Operations & Business Operations, Commercial & contractual development and implementation, and cost & budget control.
• Demonstrated Skill in planning and compiling Maintenance & Integrate Activity Schedule, and championing Customer Focus.
• With experience in the use of PrimaVera P6 and other Process Technology.
• Builds shared vision, demonstrates courage in managing change; motivates, coaches, and develops the team.

• Strong experience managing projects as a project manager, project supervisor, or ship repair manager is an added benefit.
• Having a solid history as a service engineer with knowledge of marine diesel engines, turbochargers, and marine equipment maintenance is a plus.
• Ideally, to be a marine engineer MEO
• With at least 3000 KW of competency
• Have offshore or seagoing experience
• Strong experience managing projects as a project manager, project supervisor, or ship repair manager is an added benefit.
• Academic credentials for postsecondary study in mechanical, aeronautical, marine, or marine technology engineering is a plus
• Familiar with the legal and regulatory framework that governs the shipping business.
• Strong communication and leadership abilities combined with a responsible, safe mindset.
• Extremely driven and capable of working both in a group and in a fast-paced setting.

Requirements:

• Competent in spoken and written English and able to communicate effectively.
• Be able to utilise Microsoft Word for composing reports, Outlook for email correspondence, and a basic Excel spreadsheet.
• Medically qualified to work in a shipyard or onboard a vessel in Singaporean anchorage, as well as onshore in a workshop.

• Provide direct reports to the technical manager on the progress of scheduled vessel machinery or equipment shutdowns for maintenance, repair, and servicing of marine machinery & subsystems conducted by subordinates.
• Oversee a team of mechanics to ensure the safe shutdown, isolation, overhaul, calibration, commissioning, and testing of marine main propulsion 4-stroke diesel engines, auxiliary machinery, cargo pumps, and deck machinery, while also monitoring daily work activities and progress.
• Perform tasks and activities, including standard maintenance and repair work such as preventive and corrective maintenance, ensuring they are executed safely and effectively in workshops or onboard vessels, such as engine rooms, pump rooms, or decks.

Requirements:

• Nitec in Marine/Marine technology/Mechanical/Aero Engineering or equivalent.
• At least 2 years of Seagoing or offshore experience as a Marine Engineer Officer (MEO), handling at least 3000 KW, meeting STCW Standard A-III/3.
• Prior experience as a service engineer working with marine diesel engines, turbochargers, or marine equipment is an added advantage.

If you are keen to apply for the position, kindly email your detailed resume in MS Word to [email protected]

Please note that only shortlisted candidates will be notified.

For more job opportunities, please visit our website at www.recruit-expert.com

EA Licence: 19C9701

Registration: R21100996

• Assess and negotiate incoming Maintenance & Repair estimates with the respective repair vendor/depot.
• Make sure the best possible Maintenance & Repair quality in a most cost effective manner.
• Verify incoming Equipment Check reports (ECR) for plausibility and correctness.

Requirements:

• Nitec in Industrial Engineering/Mechanical Engineering or equivalent.
• At least 2 years of relevant working experience
• Strong technical knowledge in tank containers industry.

If you are keen to apply for the position, kindly email your detailed resume in MS Word to [email protected]

Please note that only shortlisted candidates will be notified.

For more job opportunities, please visit our website at www.recruit-expert.com

EA Licence: 19C9701
Registration: R21100996

about the company

My client is a system integrator in Singapore. With their innovating technology, this is a great brand to join at an exciting time in their development & expansion.

about the job

• Managing the automotive maintenance operations and ensure all KPIs are met
• Ensure operation costs including but not limited to material, manpower and operating are kept within the operation budget
• Review and enhance the existing systems without compromising quality or service while optimizing cost
• Manage and ensure smooth day-to-day operations
• Conduct technical training
• Produce statistics and reports, to review performance and recommend procedural enhancement for discussion
• Establish, implement and monitor safe working practices and procedures
• Perform routine safety inspections on equipment and sites to ensure workshop conforms to all health & safety regulations

skills & experience required

• Master / Degree in Electrical / Mechanical / Mechatronics / Automotive Engineering
• Min 8 years of technical experience in motor vehicle maintenance & repair
• Managed service / technician previously
• Able to deliver top notch customer delivery & satisfcation
• Working in motor vehicle retailer repair operations environment

If you are interested in the position , kindly send your CVs in to yitwei.kwan(@)randstad.com.sg
Please include your availability, expected salary and reason for leaving current job
We regret that only shortlisted candidates will be contacted
EA: 94C3609 / Reg: R1325913

• Bread Manufacturing
• Basic $6500 - $8000
• AWS + Variable Bonus
• 5 Days (Office Hours)
• Location: Clementi area

Responsibilities

• Lead a team of engineering supervisors and shift engineers to diagnose mechanical and electrical breakdowns, assessing the best course of action and conducting a root cause investigation to eliminate the likelihood of re- occurrence.
• Project lead for all installations, overhaul of equipment and plant, working with suppliers to ensure they deliver on time, on budget and with minimum disruption
• Lead the implementation of a factory wide PM system using the current Process Control System, and ensuring PM activity is carried out during factory downtime at the correct frequency to an agreed standard.
• Effective manage an Engineering team including performance management, training and development
• Ensure that all projects are engineered to scope, budget and relevant standard and regulatory compliance.
• Fulfilling a key role within part of the site management team, being fully accountable and reporting on assets and ancillary plant downtime across site.
• Lead all on site preventative maintenance activities.
• Budgetary management/control, responsibility for the day to day management of the site repair and maintenance budgets
• Implement safe systems work and managing 3rd party site engineering works, liaising with the operations team to ensure that plant critical repairs minimize plant disruption or managed out of hours.
• Upholding GMP engineering standards across site, 3rd party technical customer audits & statutory inspections are passed any non-conformances are closed out with root cause analysis to avoid repeat failure.
• Continuous improvement of engineering ways of working to ensure improved equipment performance. A six sigma qualification would be desirable but not essential however knowledge of continuous tools and techniques is essential
• Lead the implementation of autonomous maintenance deployment process across the site.
• Responsible for maintaining and improvement of all engineering assets and developing an asset care strategy
• Setup an effective Engineering planning function, leading the development of Job Libraries and codifying repair

Requirements

• Degree in Mechanical or Electrical Engineering
• Minimum 5 year's management experience in engineering, project and maintenance management within food manufacturing industry.
• Demonstrates understanding of project management and engineering from a technical and operational point of view
• Strong analytical, problem-solving and decision-making skills
• Excellent planning, organizational skills and sense of urgency
• Background of hands-on experiences from new line installation project and/or focus improvement project will be advantageous

For consideration, kindly submit your CV by clicking “APPLY Now”

**Only shortlisted candidate would be notified**

EA Reg. No: R1873990 | Lucky Lee Ding Cong

Job Location : Orchard

Work Timings : Shift work ; 930am to 630pm & 1300-2200 ; 5 days work week inclusive of weekends and PH

Industry : Retail

Salary : Basic + Allowances + AWS + VB

Job Description –Maintenance & Electrical Supervisor

Basically, your duties as a Maintenance & Electrical Supervisor are as follows:

a. Plan, co-ordinate and supervise the operation, maintenance, repair and implement improvement works to all M&E and Building service and refrigeration systems, including renovation and maintenance works.

b. Prepare and ensure schedules such as Maintenance Schedule, Repair Work Schedule and M&E Equipment Operation Schedule, and deadlines for events and installations works are met accordingly.

c. Carry out daily inspections and tests of mechanical and electrical equipments/ Plant/ BAS ACMV System:

• Check daily operation and implement periodic preventive maintenance programme

• Evaluate breakdown cause and provide temporary solution/s for (further) repair/ replacement works

• Oversee contractor’s work

d. Carry out research, design and advised on mechanically functioning plant and equipment such as machine tools, engines, heating, ventilating and refrigerating installations.

e. Prepare and generate the following reports:

• Consumable reports

• Utilities reports

• Expenditure reports

• Revenue reports

f. Provide technical advice to subordinates.

g. Study labour requirement, estimate cost of installations, operations, maintenance and repair.

h. Procurement of quotations and parts for repair/ replacement/ new installation works; check bill of quality and evaluate cost of quotation.

i. Co-ordination with contractors for renovation and new installation works, scope of works and quotation.

j. Plan and supervise construction installation, operation, maintenance and repair.

k. Check completed work to ensure compliance with specifications and safety standards.

l. Anaylze situation and introduce improvement works, repair and rectification works to department store.

m. Compile and vet M&E drawings for renovations to ensure it complies to all M&E regulations. Provide comments on renovation/ promotion counter drawings.

n. Any other job-related duties as and when assigned by the company.

• Assess and negotiate incoming Maintenance & Repair estimates with the respective repair vendor/depot.
• Make sure the best possible Maintenance & Repair quality in a most cost effective manner.
• Verify incoming Equipment Check reports (ECR) for plausibility and correctness.

Requirements:

• Nitec in Industrial Engineering/Mechanical Engineering or equivalent.
• At least 2 years of relevant working experience
• Strong technical knowledge in tank containers industry.

If you are keen to apply for the position, kindly email your detailed resume in MS Word to [email protected]

Please note that only shortlisted candidates will be notified.

For more job opportunities, please visit our website at www.recruit-expert.com

EA Licence: 19C9701
Registration: R21100996

• Assess and negotiate incoming Maintenance & Repair estimates with the respective repair vendor/depot.
• Make sure the best possible Maintenance & Repair quality in a most cost effective manner.
• Verify incoming Equipment Check reports (ECR) for plausibility and correctness.

Requirements:

• Nitec in Industrial Engineering/Mechanical Engineering or equivalent.
• At least 2 years of relevant working experience
• Strong technical knowledge in tank containers industry.

If you are keen to apply for the position, kindly email your detailed resume in MS Word to [email protected]

Please note that only shortlisted candidates will be notified.

For more job opportunities, please visit our website at www.recruit-expert.com

EA Licence: 19C9701
Registration: R21100996

• Provide direct reports to the technical manager on the progress of scheduled vessel machinery or equipment shutdowns for maintenance, repair, and servicing of marine machinery & subsystems conducted by subordinates.
• Oversee a team of mechanics to ensure the safe shutdown, isolation, overhaul, calibration, commissioning, and testing of marine main propulsion 4-stroke diesel engines, auxiliary machinery, cargo pumps, and deck machinery, while also monitoring daily work activities and progress.
• Perform tasks and activities, including standard maintenance and repair work such as preventive and corrective maintenance, ensuring they are executed safely and effectively in workshops or onboard vessels, such as engine rooms, pump rooms, or decks.

Requirements:

• Nitec in Marine/Marine technology/Mechanical/Aero Engineering or equivalent.
• At least 2 years of Seagoing or offshore experience as a Marine Engineer Officer (MEO), handling at least 3000 KW, meeting STCW Standard A-III/3.
• Prior experience as a service engineer working with marine diesel engines, turbochargers, or marine equipment is an added advantage.

If you are keen to apply for the position, kindly email your detailed resume in MS Word to [email protected]

Please note that only shortlisted candidates will be notified.

For more job opportunities, please visit our website at www.recruit-expert.com

EA Licence: 19C9701

Registration: R21100996

• Specialising in Facilities Maintenance
• Candidate must possess at least Diploma/Advanced/Higher/Graduate Diploma in Facilities Management, Building Services, Engineering (Civil, Mechanical or Electrical) or equivalent.
• At least 5 Years of working experience in the related field is required for Executive position and at least 10 Years for Manager position.
• Required Skill(s): Microsoft Office
• Preferably Senior Executive specialized in Engineering - Civil/Construction/M&E/Facilities Maintenance or equivalent.
• Preferably candidates with valid Class 3 Driving License (M)

• Assess and negotiate incoming Maintenance & Repair estimates with the respective repair vendor/depot.
• Make sure the best possible Maintenance & Repair quality in a most cost effective manner.
• Verify incoming Equipment Check reports (ECR) for plausibility and correctness.

Requirements:

• Nitec in Industrial Engineering/Mechanical Engineering or equivalent.
• At least 2 years of relevant working experience
• Strong technical knowledge in tank containers industry.

If you are keen to apply for the position, kindly email your detailed resume in MS Word to [email protected]

Please note that only shortlisted candidates will be notified.

For more job opportunities, please visit our website at www.recruit-expert.com

EA Licence: 19C9701
Registration: R24120303

• Assess and negotiate incoming Maintenance & Repair estimates with the respective repair vendor/depot.
• Make sure the best possible Maintenance & Repair quality in a most cost effective manner.
• Verify incoming Equipment Check reports (ECR) for plausibility and correctness.

Requirements:

• Nitec in Industrial Engineering/Mechanical Engineering or equivalent.
• At least 2 years of relevant working experience
• Strong technical knowledge in tank containers industry.

If you are keen to apply for the position, kindly email your detailed resume in MS Word to [email protected]

Please note that only shortlisted candidates will be notified.

For more job opportunities, please visit our website at www.recruit-expert.com

EA Licence: 19C9701
Registration: R24120303

• Specialising in Facilities Maintenance
• Candidate must possess at least Diploma/Advanced/Higher/Graduate Diploma in Facilities Management, Building Services, Engineering (Civil, Mechanical or Electrical) or equivalent.
• At least 5 Years of working experience in the related field is required for Executive position and at least 10 Years for Manager position.
• Required Skill(s): Microsoft Office
• Preferably Senior Executive specialized in Engineering - Civil/Construction/M&E/Facilities Maintenance or equivalent.
• Preferably candidates with valid Class 3 Driving License (M)

Responsibilities

• Responsible for performing preventive maintenance and calibration of the machines according to the checklist
• Responsible in analysing machine problems and repair
• Responsible for updating and maintaining maintenance records and forms regularly

Requirements

• Min Nitec in Electrical Engineering
• Min 2 years of working experience in maintenance and repair of CNC metal cutting machines
• Knowledge in PLC will be advantage

Please kindly email your resume in Ms Word to [email protected]

We regret to inform that only shortlisted candidates would be notified.

Registration Number: R1328870

EA License No. 22C1026

• Provide direct reports to the technical manager on the progress of scheduled vessel machinery or equipment shutdowns for maintenance, repair, and servicing of marine machinery & subsystems conducted by subordinates.
• Oversee a team of mechanics to ensure the safe shutdown, isolation, overhaul, calibration, commissioning, and testing of marine main propulsion 4-stroke diesel engines, auxiliary machinery, cargo pumps, and deck machinery, while also monitoring daily work activities and progress.
• Perform tasks and activities, including standard maintenance and repair work such as preventive and corrective maintenance, ensuring they are executed safely and effectively in workshops or onboard vessels, such as engine rooms, pump rooms, or decks.

Requirements:

• Nitec in Marine/Marine technology/Mechanical/Aero Engineering or equivalent.
• At least 2 years of Seagoing or offshore experience as a Marine Engineer Officer (MEO), handling at least 3000 KW, meeting STCW Standard A-III/3.
• Prior experience as a service engineer working with marine diesel engines, turbochargers, or marine equipment is an added advantage.

If you are keen to apply for the position, kindly email your detailed resume in MS Word to [email protected]

Please note that only shortlisted candidates will be notified.

For more job opportunities, please visit our website at www.recruit-expert.com

EA Licence: 19C9701

Registration: R21100996

Responsibilities

• Responsible for performing preventive maintenance and calibration of the machines according to the checklist
• Responsible in analysing machine problems and repair
• Responsible for updating and maintaining maintenance records and forms regularly

Requirements

• Min Nitec in Electrical Engineering
• Min 2 years of working experience in maintenance and repair of CNC metal cutting machines
• Knowledge in PLC will be advantage

Please kindly email your resume in Ms Word to [email protected]

We regret to inform that only shortlisted candidates would be notified.

Registration Number: R1328870

EA License No. 22C1026

Jobscope:

Prepare/Review spare parts list and equipment data inventory control and ensure critical spare availability

• Optimise spare parts and manage stock effectively by using CMMS TMQ-W.
• Ensure no down time due to unavailability of spare parts.
• Service used equipment’s and components and ensure ready to use all time.
• Analyse and improve equipment reliability of utilities & facilities to prevent recurrence with production group and contractors.
• Manage in-house contractors to execute maintenance timely and effectively.
• Develop and implement routine maintenance and inspection schedule for plant equipment’s and execute Preventive maintenance, Routine inspection and periodical inspection on Rotating and static equipment’s by co-ordinate with contractors at site.
• Manage annual shutdown maintenance related to facilities and management of actual site work, liaising with contractors and production group.
• Update long-term maintenance plan for facilities and utility equipment’s.
• Ensure all maintenance activities comply with company’s EHS policies.

Requirements:

• Degree/Diploma in mechanical engineering or the equivalent
• 3-5 years of experience in Plant & facilities in chemical plant.
• Basic understanding of maintenance technology manufacturing process plant environment.
• Demonstrated ability to adjust contractors independently and effectively.
• Good interpersonal and communication skills

To apply, please visit www.gmprecruit.com and search for Job Reference: 24048

To learn more about this opportunity, please contact Fiona Koh

We regret that only shortlisted candidates will be notified.

GMP Technologies (S) Pte Ltd | EA Licence: 11C3793 | EA Personnel: Fiona Koh| Registration No: R1109239

Responsibilities:

• Coordinate with Developer / Management Agent / Consultants’ Representatives to schedule inspection and sequence of work for defects rectification.
• Carry out inspections to identify root cause of defects issue and make suitable recommendation for rectification works.
• Manage daily site operations – coordinate with subcontractors and lead a team of workers to carry out works according to approved drawings, instructions, or approved method.
• Ensure that all site works are complying with safety standards and processes.
• Carry out inspection to ensure quality and acceptability of all works.
• Ensuring that the works are carried out to schedule and keep proper records to close on defects cases with stakeholders.
• To report on the progress and quality of rectification works on site.

Requirement:

• With relevant trade Diploma / Certificates or working experiences.
• Proficient in MS Office Applications (Word, PowerPoint, and Excel).
• Possesses Safety Supervisor Certificate and knowledgeable on-site safety requirements.
• Able to communicate effectively with Client, Homeowners and Subcontractors.
• Strong in organization and coordination of site work, with respect to management of workers and Subcontractors.
• Good technical knowledge of building trades and acceptable practices, as well as defects rectification methodology is essential.
• Able to work independently and deliver results within stipulated deadlines.

Responsibilities

• Responsible for performing preventive maintenance and calibration of the machines according to the checklist
• Responsible in analysing machine problems and repair
• Responsible for updating and maintaining maintenance records and forms regularly

Requirements

• Min Nitec in Electrical Engineering
• Min 2 years of working experience in maintenance and repair of CNC metal cutting machines
• Knowledge in PLC will be advantage

Please kindly email your resume in Ms Word to [email protected]

We regret to inform that only shortlisted candidates would be notified.

Registration Number: R1328870

EA License No. 22C1026

Responsibilities

• Responsible for performing preventive maintenance and calibration of the machines according to the checklist
• Responsible in analysing machine problems and repair
• Responsible for updating and maintaining maintenance records and forms regularly

Requirements

• Min Nitec in Electrical Engineering
• Min 2 years of working experience in maintenance and repair of CNC metal cutting machines
• Knowledge in PLC will be advantage

Please kindly email your resume in Ms Word to [email protected]

We regret to inform that only shortlisted candidates would be notified.

Registration Number: R1328870

EA License No. 22C1026

Responsibilities

• Responsible for performing preventive maintenance and calibration of the machines according to the checklist
• Responsible in analysing machine problems and repair
• Responsible for updating and maintaining maintenance records and forms regularly

Requirements

• Min Nitec in Electrical Engineering
• Min 2 years of working experience in maintenance and repair of CNC metal cutting machines
• Knowledge in PLC will be advantage

Please kindly email your resume in Ms Word to [email protected]

We regret to inform that only shortlisted candidates would be notified.

Registration Number: R1328870

EA License No. 22C1026

Benefits Summary:

• Up $4000 + Allowance + Benefits
• 5 Days work week
• Working Location: Tuas

Responsibilities:

• Regular inspection to ensure machines equipments are in optimal performance
• Conducting preventing maintenance and servicing for the machines and equipment
• Track, monitor, and manage its spare parts inventory system at all times
• Maintain the documents records
• Any ad-hoc duties as required

Interested candidates, please submit your updated resume in MS format by using the Apply Now Button.

Follow us on Facebook for more info:

https://www.facebook.com/EC-Recruitment-Pte-Ltd-113771667194961/

Text us on for more details:

https://wa.me/6582693981

Follow us on Telegram for more job opportunities:

https://t.me/ecrecruitment

Our dedicated and approachable E&C consultants will get back to you soon for a confidential discussion.

By submitting your application or resume to us, you will be deemed to have agreed and consented us that we may collect, use or disclose your personal information for purpose in connection with the services provided by us.

**We regret to inform that only shortlisted candidates would be notified. **

Responsibilities

• Taking charge of projects undertaken by the Company
• Responsible for ensuring the completion, delivery and handover of projects according to respective project scope specifications and standard
• Responsible for the planning, leading and supervision of ship repair & ship building production team to ensure that works are carried out in a safe, timely and cost-effective manner
• Co-ordinate with the Project Manager to lead the Operations Department to ensure efficient and productive operations in all projects
• Liaise and coordinates between other departments and ensures effective communication and seamless production workflow execution
• Discussion,advising and coordination of works with all relevant parties
• Preparation of reports as required
• Observeand maintain safety rules and regulations

Requirements

• Repairing of boiler experience is a MUST for this position, with at least min. 2 years experiences in the similar marine industry
• Team player with leadership qualities and manage the Repair Team
• Able to plan, coordinate and monitor repair activities onboard vessels
• Able to work under pressure and tight schedules
• Must be willing to travel Overseas, work odd hours , weekends and Public Holidays
• Able to deal and communicate with people effectively at all levels, identify and manage issues, cost consciousness and urgency to get things done
• Familiarity with applying Hot Work Permit, Shipyard DDO and other relevant documents pertaining to each job requirements
• Able to work on weekends based on job needs and vessels’ schedules

Responsibilities

• Responsible for performing preventive maintenance and calibration of the machines according to the checklist
• Responsible in analysing machine problems and repair
• Responsible for updating and maintaining maintenance records and forms regularly

Requirements

• Min Nitec in Electrical Engineering
• Min 2 years of working experience in maintenance and repair of CNC metal cutting machines
• Knowledge in PLC will be advantage

Please kindly email your resume in Ms Word to [email protected]

We regret to inform that only shortlisted candidates would be notified.

Registration Number: R1328870

EA License No. 22C1026