Maintenance Engineer | Up to $4.5k | Macpherson

• Working Location: UB, MacPherson MRT
• Salary Range: $3500 to $4500 + 120 Transport Allowance + AWS +VB
• Working Hours: 9am -6pm
  
  Responsibilities:
• Responsible for planning and implementing the execution of preventive and corrective programs within schedule in compliance to regulatory standards and requirements.
• Perform troubleshooting/ faut diagnosis/ failure analysis to determine cause of failure for equipment.
• Development of Standard Operating procedures (SOP) and Work Instructions (WI) to technicians to develop their competence.
• Develop and perform Risk Assessments to evaluate mitigation measures for all maintenance activities.
• Establish and maintain proper document system to achieve all jobs internally for sharing and audit purposes.
• Assist in identification, planning and reviewing of necessary training needs for mentoring and coaching of maintenance staffs.
• Preparation and write maintenance and spares consumption report.
• Perform other duties as instructed by Management.

Requirements:

• Degree in Engineering or related discipline
• 2–3 years of relevant work experience

The Supreme HR Advisory Pte Ltd | 14C7279

Ong Boon Kiet (Travys) | R22104769

Senior Recruitment Consultant

Our client is from Oil and Gas industry. They are looking for a Senior Mechanical Engineer for the next phase of their business. They are located in West.

Duties:

• Responsible in guiding the maintenance, troubleshooting, repair, commissioning and substitute of mechanical or piping equipment within the Gas Engine Generators as well as its additional systems such as gas engine, pipeline, pressure pipe, ACMVs, lube oil and coolant pumps arrangement.
• Responsible in supporting mechanical support and solutions for the process & care and providing the development of care strategy including procedure/specification focusing on equipment dependability, spares inventory necessity, shutdown and inspection lists, preventive and prophetic care programmed.
• Responsible in managing and work meticulously with internal contractor and equipment seller to perform maintenance work at the Gas Engine Generators Building and terminal.
• Responsible to make certain compliance to appropriate regulations, manipulate safely, fit for object, maintainable and trustworthy for the site’s modified or anew build mechanical setup (such as gas engine, pumps, gravity vessel, safety facilities, etc).
• Responsible in guiding technical negotiations, execute and succeed project schedules or cost as well as collaboration with outward and internal shareholders, merchants for end of life and development project using company Management of Change process for machinery facilities.
• Responsible in supplying technical practicing as required in the area of process, maintenance, fault resolution of the Gas Engine Generators.
• Responsible in contacting with exterior investor including administration agencies on approbation and risk of closure of electrical arrangement that will influence gas-send out.

Requirements

• Min Bachelor’s Degree in Mechanical Engineering or any relevant field.
• Min 3 to 5 years’ experience in relevant industry for maintenance of rotary and staticequipment is needed
• Prior experience in different types of gas/diesel machine knowledges is a bonus.

Interested candidates who wish to apply for the advertised position, please click APPLY NOW or email an updated copy of your resume/cv.

We regret that only shortlisted candidate will be notified.

Email Address: [email protected]

Recruitpedia Pte. Ltd.

EA License No: 19C9682

EA Personnel No: R2198636 (Oh Puey Xin)

Assistant/Maintenance Engineer (Rotating and Static Equipment)

Responsibilities

• Carry out preventive maintenanceworks in accordance to the preventive maintenance program.
• Manage information and data of maintenance and inspection in the inventory and planning system R-MIC.
• Responsible and coordinate with project team and/or contractors in the big construction or modification work as mechanical engineer.
• Responsible and Coordinate with production team and/or contractors in the investigation of cause of equipment breakdown and propose remedial action.
• Carry out piping design work and manage the actual piping work with safety.
• Carry out small civil design work (e.g. Equipment foundation, Shelter, Loading bay, ACMV and etc.) and manage the actual civil work with safety.
• Coordinate with contractors onsite inspections and repair and maintain and jet cleaning.
• Document management (e.g. To make SOP, WI, RA and presentation slide, To manage drawings for construction, replacement and modification).
• Assist in the preparation of Shut down Maintenance (SDM) planning and execution.
• To take quotation and checking of machine parts and construction work.
• Manage spare parts and consumables inventory for replenishment of stocks.

Requirements

• Min Diploma in Mechanical / Mechatronic Engineering or equivalent.
• Mechanical knowledge and experience (Disassembling, assembling and overhaul of plant equipment and machinery (Such as Pumps, Compressor, Blower, Gear box, Agitator, Mechanical seal and Piping)
• Basic mechanical experience (Maintenance, Repair, Overhaul work)
• Prepared to be on standby to respond to plant emergencies after office hours.
• An effective team player with excellent service attitude.
• Possess strong safety awareness.

Interested applicants please submit your resume to [email protected]

Our client is from Oil and Gas industry. They are looking for a Maintenance Scheduler (E&I) to assist their team for the next phase of their business. They are located in West.

Duties:

• Plan and schedule daily maintenance tasks for Electrical & Control assets.
• Coordinate with Mechanical, HSSE, Production, and Jetty Operations teams on work requests and permits.
• Liaise with authorities for natural gas equipment maintenance approvals.
• Coordinate with external vendors and contractors for site surveys and work execution.
• Ensure validity of Method of Statement and risk assessments.

Requirements:

• Minimum Bachelors Degree in Electrical Engineering or any relevant field.
• Minimum 5 to 8 years of E&I experience in Oil and Gas Industry or any relevant industry.

Interested candidates who wish to apply for the advertised position, please click APPLY NOW or email an updated copy of your resume/cv. We regret that only shortlisted candidate will be notified.

Email address: [email protected]

Recruitpedia Pte. Ltd.

EA License No. 19C9682
EA Reg. No. R22108850 (Chan Mun Mun)

Our client is from Oil and Gas industry. They are looking for a Electrical & Control Maintenance Supervisor to assist their team for the next phase of their business. They are located in West.

Duties:

• Lead and supervise electrical technicians and contractors in system installation, maintenance, and repair.
• Develop and conduct on-the-job training programs for E&I team members.
• Perform site inspections and quality control for electrical work.
• Review and approve electrical isolation, excavation, and related permits.
• Investigate electrical maintenance issues, identify root causes, and implement solutions.
• Collaborate with other engineers to ensure equipment reliability through effective maintenance programs.

Requirements:

• Minimum Bachelors Degree in Electrical Engineering or any relevant field.
• Minimum 8 to 12 years experience in Oil and Gas Industry or any relevant industry.

Interested candidates who wish to apply for the advertised position, please click APPLY NOW or email an updated copy of your resume/cv. We regret that only shortlisted candidate will be notified.

Email address: [email protected]

Recruitpedia Pte. Ltd.

EA License No. 19C9682
EA Reg. No. R22108850 (Chan Mun Mun)

• We are seeking applications for a full-time Building Maintenance Specialist – HVAC. This position is responsible for maintaining existing plumbing, heating and cooling systems on the facilities and installing new systems according to state code. The position will report to the MEP Supervisor (Mechanical, Electrical, and Plumbing).

Responsibilities:

• Create estimates for new installations of HVAC equipment and plumbing systems.
• Troubleshoot, repair, and upgrade HVAC and plumbing systems.
• Replace and maintain plumbing fixtures (sinks, toilets, etc.)
• Track the service and inspection dates for air handlers, air compressors,
• HVAC pumps, chillers, A/C units, water softeners, food service equipment, etc.
• Timely response to work orders.
• Track project time, effort, and expenses.
• Occasionally, respond to calls after hours and on weekends.
• Perform preventative maintenance on equipment and systems.

Requirements:

• 1 – 3 years of relevant work experience.
• Ability to follow written and oral instructions.
• Ability to operate required equipment.
• Knowledge of Microsoft Office (Word, Excel, and Outlook).
• Ability to work independently.
• Deal tactfully and work effectively with others.

If you are interested in the position, do kindly drop your most updated resume to [email protected]

Thank You.

Leon Leong De Cong
R1551708
Recruit Express Pte Ltd (Healthcare & Lifesciences Division)
EA License: 99C4599

WhatsApp: +65 90820021 (Kyler)

Email: [email protected]

5 days, 8.30am- 5.50pm, standby duty might be required

Salary: $2700- $3000

Address: Bedok

Job scope:

• To perform routine preventive work and site corrective maintenance
• Responsible for integration of both hardware & software work as well as implementation
• Carry out proper execution of the integration/engineering/maintenance work and QA Technical checks throughout project execution
• Handle application programme change management, hardware deployment management & documentation
• Meeting with clients, reports and documentation
• Capable of performing troubleshooting independently

Requirements:

• Diploma in Electrical/Electronic or related discipline
• Able to perform standby duties (standby allowance will be provided if on standby duty) – standby only start maybe 6 months later because need training
• Site maintenance and travelling is required
• Class 3 driving license preferred

The Supreme HR Advisory Pte. Ltd | 14C7279

Gan Kai Le | R23112683

Job Description

• Industry/ Organization Type: Cargo & Container Leasing
• Position Title: Maintenance & Repair Manager / M&R Manager
• Working Location: Bugis
• Working Hours: 5 days (Monday to Friday 8.30 AM – 5.30 PM)
• Salary Package: Basic Salary up to $7,000 + AWS + Performance Bonus + Transport Allowance
• Duration: Permanent Role

Key Responsibilities

• Responsible for the technical management of the tank containers within a defined geographic area (Asia)
• Arrange and coordinate timely delivery of the repair and modification estimates supplied by the depot workshops
• Evaluate correctness and ensure complete and accurate administration
• Coordinate and/or conduct the surveys and inspections on the tank containers
• Coordinate the repair process at the depots and monitor the progress of repairs and modifications
• Monitor cost control of the service providers in your region
• Provide Technical support/troubleshooting when needed
• Control of the stock and repair overviews
• Build and maintain a working relationship with the service providers, subcontractors, and suppliers
• Perform Depot audits as required
• Any other ad-hoc duties as assigned

APPLY NOW!!!

• Bachelor’s Degree in Engineering, Administration, Facility Management or equivalent
• Has a minimum of 5 years of working experience, preferably at a tank container depot
• In-depth knowledge of Dangerous Goods Transport (worldwide)

Kindly apply through ANY of the following methods:

• Submit your application by clicking the APPLY button;
• Email your resume to Job(at)anradus.com.sg. Kindly indicate #68000 on the email subject.

Anradus Application Policy: We value each application and ensure every resume is reviewed. Our process is efficient, typically concluding within 3 working days. If you do not receive communication from us within this timeframe, it’s likely that your application has not been shortlisted by our client. In such cases, we recommend continuing your job search to maximize your opportunities.

Anradus Pte Ltd | EA License No. 20C0161 | Angel Lim | EA Reg No.: R1769781

Job Description

• Industry/ Organization Type: Chemical Manufacturing
• Position Title: Maintenance Technician
• Working Location: Tuas (Transport Provided)
• Working Hours: Monday – Friday (8.15 AM to 5 PM)
• Salary Package: Basic Salary up to $2,200 + OT + AWS + Bonus + Transport Allowance + Attendance Allowance
• Duration: Permanent

Key Responsibilities

• Assist the Maintenance Engineer in maintaining plant machinery and facilities.
• Perform scheduled and preventive maintenance tasks.
• Respond to machinery breakdowns and assist in repair work.
• Carry out welding and fabrication duties.
• Install equipment and fixtures.
• Support new projects, electrical wiring, and engineering tasks.
• Update and maintain records of plant equipment and machinery.
• Manage the spare parts inventory.
• Prepare monthly reports on utility usage.
• Any other ad-hoc duties as assigned.

APPLY NOW!!!

• Minimum O-level/NITEC qualifications
• Candidates who have welding certificates/experience are an added advantage

Kindly apply through ANY of the following methods:

• Submit your application by clicking the APPLY button;
• Email your resume to Job(at)anradus.com.sg. Please indicate #67713 on the email subject.

Anradus Application Policy: We value each application and ensure every resume is reviewed. Our process is efficient, typically concluding within 3 working days. If you do not receive communication from us within this timeframe, it's likely that your application has not been shortlisted by our client. In such cases, we recommend continuing your job search to maximize your opportunities.

Anradus Pte Ltd | EA License No. 20C0161 | Angel Lim | EA Reg No.: R1769781

Job Description

• Industry/ Organization Type: Logistics/ Manufacturing & Production
• Position Title: Maintenance Technician/ Facilities Technician
• Working Location: Jurong Island (Company Transportation Provided)
• Working Hours: Monday to Friday, 8 am - 5.45 pm
• Salary Package: Basic Salary + Allowances + OT + Incentive + AWS + PB
• Duration: Permanent

Key Responsibilities

• Perform preventive maintenance and corrective repairs on packaging and conveying equipment, including vehicles, chassis, forklifts, and industrial facilities.
• Troubleshoot and resolve electrical, mechanical, pneumatic, and hydraulic system faults.
• Identify technical issues through inspections and tests; analyze and diagnose malfunctions.
• Use various tools and equipment for diagnosis and repair; order and replace parts, working with suppliers.
• Maintain accurate repair records and parts inventory; communicate findings and repair options.
• Attend to breakdowns, reduce equipment downtime, and enhance performance through quality maintenance.
• Ensure compliance with Health & Safety policies, maintain workplace housekeeping, and follow safe work procedures.

APPLY NOW!!!

• Possession of Diploma, NITEC, NTC-2 or ITC Mechatronic / Electrical Engineering is preferred
• Equipment knowledge - Bagging/ packaging/ conveyor system
• General knowledge of AC drives and electrical motors, pneumatic cylinders and roller/chain conveyors
• Knowledge of PLC, control circuits and electrical system
• Min. 3 years' relevant experience in heavy industry sector
• Experience in Bagging line would be an advantage

Kindly apply through ANY of the following methods:

• Submit your application by clicking the APPLY button;
• Email your resume to Job(at)anradus.com.sg. Please indicate #65269 on the email subject.

Anradus Application Policy: We value each application and ensure every resume is reviewed. Our process is efficient, typically concluding within 3 working days. If you do not receive communication from us within this timeframe, it's likely that your application has not been shortlisted by our client. In such cases, we recommend continuing your job search to maximize your opportunities.

Anradus Pte Ltd | EA License No. 20C0161 | Adelin Chong | EA Reg No.: R1875641

Job Description

• Industry/ Organization Type: Precision Engineering
• Position Title: Maintenance Engineer
• Working Location: Bukit Batok
• Working Hours: 5 days (Mon – Fri, 8.00 am – 5.30 pm)
• Salary Package: Basic salary up to $3,000 + Variable Bonus + OT
• Duration: Permanent Role

Key Responsibilities

• Create and execute regular maintenance plans for all machinery and equipment.
• Identify and fix issues with mechanical, electrical, and pneumatic systems in CNC machines and other equipment.
• Help with setting up and starting new equipment.
• Keep detailed records of all maintenance work, including logs, reports, and manuals.
• Follow all health and safety rules and foster a safe workplace.
• Spot areas for improvement and introduce changes to better equipment efficiency and reliability.
• Manage spare parts inventory and handle ordering as required.
• Cooperate closely with production, quality, and engineering teams to meet operational objectives.

APPLY NOW!!!

• Bachelor's Degree or Diploma in Electrical or Mechanical Engineering or related field.
• 3-5 years in maintenance engineering in related field.
• Good understanding of CNC machines (Fanuc control) and PLC programming.
• Experienced with AUTOCAD and Microsoft Office Suite.
• Willingness to work outside regular hours if necessary.

Please apply through ANY of the following methods:

• Submit your application by clicking the APPLY button;
• Email your resume to Job(at)anradus.com.sg. Please indicate #67933 on the email subject.

Anradus Application Policy: We value each application and ensure every resume is reviewed. Our process is efficient, typically concluding within 3 working days. If you do not receive communication from us within this timeframe, it's likely that your application has not been shortlisted by our client. In such cases, we recommend continuing your job search to maximize your opportunities.

Anradus Pte Ltd | EA License No. 20C0161 | Adelin Chong | EA Reg No.: R1875641

Job Description

• Industry/ Organization Type: Chemical Manufacturer
• Position Title: Technician (Production/ Maintenance)
• Working Location: Tuas (Transport provided from JE/ CCK MRT)
• Working Hours: Mon – Fri, 8 am – 5 pm
• Salary Package: Basic + Performance Bonus + OT + AL 14 days + Dental + Insurance
• Duration: Permanent

Key Responsibilities

• Carry out production works as assigned by the Superior.
• Ensure machines and tools are functioning properly and report malfunctions promptly.
• Assist with electrical or mechanical repairs under supervision.
• Maintain cleanliness and order in the work area.
• Handle the loading and unloading of materials and goods, and package products as needed.
• Conduct inventory checks.
• Engage in Quality, Environment, Health, Safety, and Security (QEHSS) related activities.

APPLY NOW!!!

• At least Nitec in Electronic/ Electrical Engineering with a minimum of 2 years of related working experience.
• Knowledge in process control and product quality.
• Able to commit OT as and when needed.
• Class 3 Driving License and forklift/ Scissor License are a plus.

Please apply through ANY of the following methods:

• Submit your application by clicking the APPLY button;
• Email your resume to Job(at)anradus.com.sg. Please indicate #66316 on the email subject.

Anradus Application Policy: We value each application and ensure every resume is reviewed. Our process is efficient, typically concluding within 3 working days. If you do not receive communication from us within this timeframe, it's likely that your application has not been shortlisted by our client. In such cases, we recommend continuing your job search to maximize your opportunities.

Anradus Pte Ltd | EA License No. 20C0161 | Adelin Chong | EA Reg No.: R1875641

• Position : Automotive Technician/Car Mechanic/Car Repair (Sin Ming Dr)
• Location : Sin Ming Drive (Nearest MRT: Brighthill)
• Working hours : 5.5 Days Monday-Friday: 9am-6pm, Saturday 9am-2pm
• Salary (commensurate with experience) : Up to $3000 + AWS + Performance Bonus + 14 Days Annual Leave
• Duration : Permanent
• Industry : Automotive/Automobile

Main Responsibilities:

• Carry out maintenance servicing and repair of motor vehicles
• Conduct diagnostic checks, troubleshooting, automatic transmission and engine overhaul
• Perform quality checks and road tests on vehicles
• Liaise with Service Advisors on service/repairs-related matters
• Provide support to customer service and workshop
• Maintain facilities and equipment of the workshop
• Any other or ad-hoc assignments by the Workshop Manager

Requirements:

• Possess relevant certificates in Automotive Engineering or its equivalent
• Have minimum 3 years of relevant working experience in automotive industry
• Have working knowledge of mechanical, electrical and electronic components of various makes and models of vehicles
• Have working knowledge of vehicle diagnostic systems and methods
• Bilingual in English and Mandarin to converse with Mandarin speaking associates

Email to: [email protected] or call me at: 6398 5682 for more information.

Do visit www.facebook.com/search.personnel and https://www.instagram.com/search.personnel for more job listings and career tips!

***We do not charge our candidates any referral fee nor bind them with any contract.***

Diana Okta Tio

Associate Consulting Director (APAC)

Reg no.: R2094678

EA No: 13C6684

Thank you for your interest in this position. Our shortlisting period is 3 working days. Only shortlisted candidates will be contacted for further consideration.

If you do not receive communication from us within this timeframe, it's likely that your application has not been shortlisted by our client. In such cases, we recommend that you continue your job search to maximize your opportunities. We wish you all the best and should we have any suitable roles that match your experiences/ qualifications/ preferences, we will reach out to you.

Our client is from Oil and Gas industry, a local leading player. They are looking for a Mechanical Maintenance Supervisor for the next phase of their business. They are located in West.

Duties of Mechanical Maintenance Supervisor:

• Supervise in-house contractors and vendors to ensure safe and efficient execution of mechanical tasks.
• Develop and update maintenance plans and schedules to minimize production disruptions.
• Analyze equipment performance to identify issues and propose improvements.
• Ensure maintenance plans meet engineering standards and compliance with regulations.
• Prepare maintenance documentation, including checklists and risk assessments.
• Achieve maintenance KPIs and support technician training and development.
• Manage manpower, including overtime and emergency planning.
• Oversee spare parts and warehouse activities, including stock management and ordering.
• Handle service contract scopes, PR, and evaluations.
• Forecast, monitor, and manage maintenance budget.
• Participate in emergency response and assume relevant roles as needed.

Requirements

• Min Diploma in Mechanical Engineering related field.
• Min 8 years’ experience in Oil & Gas or Petrochemical industry
• Experience in mechanical maintenance and supervisory

Interested candidates who wish to apply for the advertised position, please click APPLY NOW or email an updated copy of your resume/cv.

We regret that only shortlisted candidate will be notified.

Email Address: [email protected]

Recruitpedia Pte. Ltd.

EA License No: 19C9682

EA Personnel No: R2198636 (Oh Puey Xin)

Our client is from Oil and Gas industry, a local leading player. They are looking for a Maintenance Technician for the next phase of their business. They are located in West.

Duties:

• Perform preventive, predictive, and corrective maintenance tasks as directed, and update the CMMS database.
• Maintain rotating and static equipment, plant piping, and structural support systems.
• Respond to and resolve equipment malfunctions, ensuring minimal downtime.
• Determine necessary materials, tools, and methods for safe maintenance tasks.
• Conduct machinery condition monitoring and field data collection with the production team.
• Ensure operational efficiency of all plant valves and mechanical components, including control and plant valve maintenance.
• Supervise in-house contractors and vendors, ensuring safety protocols are followed.
• Collaborate with the production team on mechanical system testing and troubleshooting.
• Take on additional tasks or responsibilities as assigned.
• Perform valve line-up and LOTO for maintenance preparations.
• Participate in the Company's Emergency Response Team (CERT) with assigned roles.

Requirements

• Nitec in Engineering related field.
• Min 5 years’ experience in Oil & Gas or Petrochemical industry
• Experience in troubleshooting of mechanical/ machinery systems

Interested candidates who wish to apply for the advertised position, please click APPLY NOW or email an updated copy of your resume/cv.

We regret that only shortlisted candidate will be notified.

Email Address: [email protected]

Recruitpedia Pte. Ltd.

EA License No: 19C9682

EA Personnel No: R2198636 (Oh Puey Xin)

Our client is from Oil and Gas industry, a local leading player. They are looking for a Electrical Maintenance Supervisor for the next phase of their business. They are located in West.

Duties:

• Ensure compliance with safety procedures and electrical codes.
• Supervise and lead electrical technicians and contractors in installation, maintenance, and repair of systems.
• Develop and conduct structured on-the-job training for E&I team members.
• Inspect and ensure quality control of all electrical works.
• Review and approve electrical isolation and excavation permits.
• Lead investigations into electrical maintenance issues, identifying root causes and implementing solutions.
• Collaborate with engineers to develop and implement maintenance programs for reliability.
• Conduct morning toolbox meetings focusing on safety and maintenance activities.
• Participate in emergency response procedures with assigned roles and responsibilities.

Requirements

• Min Diploma in Electrical Engineering related field.
• Min 8 years’ experience in Oil & Gas or Petrochemical industry
• Experience in E&I maintenance and supervisory

Interested candidates who wish to apply for the advertised position, please click APPLY NOW or email an updated copy of your resume/cv.

We regret that only shortlisted candidate will be notified.

Email Address: [email protected]

Recruitpedia Pte. Ltd.

EA License No: 19C9682

EA Personnel No: R2198636 (Oh Puey Xin)

Job Description

• Industry/ Organization Type: Manufacturer
• Position Title: Machine Operator (Maintenance & Production)
• Working Location: West – Boon Lay (Nearby Jurong Shipyard)
• Working Hours: 5.5 days (Mon to Fri: 8 AM – 5 PM, Sat: 8 AM - 12 PM)
• Salary Package: Up to SGD2800 + OT + Travel Allowance + AWS + Performance bonus
• Duration: Permanent

Key Responsibilities

• Read and follow job orders
• Determine the required quantity to meet daily output
• Prepare and set up machines for production – clean, checking etc.
• Ensure to carry out machine operation and maintenance in good and safe working conditions
• Control and run the machine to the fullest extent
• Being able to identify any faults or problems in operations or maintenance of machines and troubleshoot arising issues
• Inspect the machine outputs for process and quality control
• Provide detailed reports and logs on the work done daily
• Keep up with safety requirements and maintain a safe work setting at all times
• Proposing improvements to the process or machines as needed
• Reporting safety hazards within the work environment
• Debagging activities and packing products in 25kg HL and jumbo bags

APPLY NOW!!!

• Min. N Level
• Min. 2 years of working experience in the manufacturing industry or relevant field
• Able to do repetitive tasks; detail-oriented; understanding of industry and safety standards
• Possess basic knowledge of PC, general maintenance, and repair tasks
• Comfortable to work OT
• On-Job training provided

Please apply through ANY of the following methods:

• Submit your application by clicking the APPLY button;
• Email your resume to Job(at)anradus.com.sg. Please indicate #67062 on the email subject.

Anradus Application Policy: We value each application and ensure every resume is reviewed. Our process is efficient, typically concluding within 3 working days. If you do not receive communication from us within this timeframe, it's likely that your application has not been shortlisted by our client. In such cases, we recommend continuing your job search to maximize your opportunities.

Anradus Pte Ltd | EA License No. 20C0161 | Celine Tan | EA Reg No.: R1873694

Job Opportunity: Mechanical Maintenance Technician

Are you a skilled Mechanical Maintenance Technician with a knack for ensuring equipment reliability and minimizing downtime? Join the team and contribute to the seamless operation of our mechanical systems in Jurong Island!

Job Details:

• Employment Type: Full-Time
• Industry: Chemical Manufacturing Sector
• Work Schedule: 12-hour Shift Rotation (3/2/2/3)
• Compensation: Monthly Base Salary Range of SGD 2,000 to SGD 2,400 with addtion of Monthly Fixed Allowance
• Potential Monthly Gross Salary: From SGD 2,800 to SGD 3,200 ++
• Work Location: Jurong Island, Singapore
• Company Transportation Provided: Jurong East / Lakeside MRT
• Additional Benefits: AWS & Performance-Based Bonuses

Key Responsibilities:

• Ensure the proper operation and maintenance of mechanical systems to minimize downtime and ensure equipment reliability.
• Optimize equipment performance, enhance energy efficiency, and identify opportunities for process improvements.
• Collaborate with various stakeholders, providing technical expertise and contributing to effective decision-making processes.
• Participate in all health and safety initiatives and ensure compliance with safety measures during mechanical maintenance activities.

Entry Requirements:

• Possess at least an NITEC Certificate in Mechanical Engineering.
• Have a minimum of 2 years of relevant working experience in mechanical maintenance.
• Proficient in mechanical systems and maintenance procedures.
• Capable of basic report writing for mechanical maintenance tasks.
• Ability to conduct basic root cause analysis for mechanical breakdowns.

How to Apply:

If you're passionate about maintaining efficient mechanical systems and ensuring operational excellence, we encourage you to apply for the Mechanical Maintenance Technician role. Click "Apply Now" to submit your application. (Please note that only shortlisted candidates will be contacted.)

Recruit Lync Pte Ltd | EA License Number: 22C1000
Poon Weng Teik (Wilson) | EA Personnel License: R1657737

Job Opportunity: Electrical Maintenance Technician

Are you a skilled Electrical Maintenance Technician eager to ensure the reliability and efficiency of electrical systems in a dynamic chemical manufacturing environment? Join the team and play a crucial role in maintaining the operations at peak performance.

Job Details:

• Employment Type: Full-Time
• Industry: Manufacturing Sector
• Work Schedule: 12-hour Shift Rotation (8am/pm-8pm/am), following a 3/2/2/3 pattern
• Compensation: Monthly Base Salary Range of SGD 2,000 to SGD 2,400, with additional Monthly Fixed Allowance
• Potential Monthly Gross Salary: From SGD 2,800 to SGD 3,200 ++
• Work Location: Jurong Island, Singapore
• Company Transportation Provided: Jurong East / Lakeside MRT
• Additional Benefits: AWS & Performance-Based Bonuses

Key Responsibilities:

• Ensure the efficient operation and upkeep of electrical systems to minimize downtime and enhance reliability.
• Conduct routine maintenance tasks and respond promptly to electrical issues to ensure timely resolution.
• Collaborate with stakeholders to optimize equipment performance and identify process improvement opportunities.
• Adhere to safety protocols and maintenance procedures to uphold workplace safety standards.
• Support equipment calibration, validation, and documentation for compliance and tracking purposes.

Entry Requirements:

• Possess at least an NITEC Certificate in Electrical Engineering.
• Have a minimum of 2 years of relevant working experience in electrical maintenance.
• Knowledge of electrical systems and maintenance procedures.
• Ability to perform basic report writng for electrical maintenance tasks.
• Ability to conduct basic root cause analysis for electrical breakdowns.

How to Apply:

If you're passionate about maintaining electrical systems and ensuring operational excellence, we invite you to apply for the Electrical Maintenance Technician role. Click "Apply Now" to submit your application. (Please note that only shortlisted candidates will be contacted.)

Recruit Lync Pte Ltd | EA License Number: 22C1000

Poon Weng Teik (Wilson) | EA Personnel License: R1657737

Our client is from Oil and Gas industry. They are looking for a Electrical & Control Maintenance Supervisor to assist their team for the next phase of their business. They are located in West.

Duties:

• Lead and supervise electrical technicians and contractors in system installation, maintenance, and repair.
• Develop and conduct on-the-job training programs for E&I team members.
• Perform site inspections and quality control for electrical work.
• Review and approve electrical isolation, excavation, and related permits.
• Investigate electrical maintenance issues, identify root causes, and implement solutions.
• Collaborate with other engineers to ensure equipment reliability through effective maintenance programs.

Requirements:

• Minimum Bachelors Degree in Electrical Engineering or any relevant field.
• Minimum 8 to 12 years experience in Oil and Gas Industry or any relevant industry.

Interested candidates who wish to apply for the advertised position, please click APPLY NOW or email an updated copy of your resume/cv. We regret that only shortlisted candidate will be notified.

Email address: [email protected]

Recruitpedia Pte. Ltd.

EA License No. 19C9682
EA Reg. No. R22108850 (Chan Mun Mun)

Our client is from Oil and Gas industry. They are looking for a Maintenance Scheduler (E&I) to assist their team for the next phase of their business. They are located in West.

Duties:

• Plan and schedule daily maintenance tasks for Electrical & Control assets.
• Coordinate with Mechanical, HSSE, Production, and Jetty Operations teams on work requests and permits.
• Liaise with authorities for natural gas equipment maintenance approvals.
• Coordinate with external vendors and contractors for site surveys and work execution.
• Ensure validity of Method of Statement and risk assessments.

Requirements:

• Minimum Bachelors Degree in Electrical Engineering or any relevant field.
• Minimum 5 to 8 years of E&I experience in Oil and Gas Industry or any relevant industry.

Interested candidates who wish to apply for the advertised position, please click APPLY NOW or email an updated copy of your resume/cv. We regret that only shortlisted candidate will be notified.

Email address: [email protected]

Recruitpedia Pte. Ltd.

EA License No. 19C9682
EA Reg. No. R22108850 (Chan Mun Mun)

Our client is a Global MNC, one of the leading players in the Industrial Equipment sector. Due to business needs, they are now recruiting a Maintenance Technician to be part of their team for ongoing transformation projects. They are located in the West – easily accessible.

Responsibilities:

• Assess the various mechanical and hydraulic systems, troubleshooting issues, and devising effective solutions.
• Interpret technical drawings, detecting the relevant faults/issues, and executing the essential repairs
• Be knowledgeable about engine components, handling the operation/maintenance of the designated tools and equipment
• Undertake maintenance tasks on large machinery, including lifting heavy parts/components
• All other adhoc duties as assigned

Requirements:

• Minimum Nitec in the relevant fields of Engineering
• Minimum 1 year of relevant working experience (Maintenance of heavy industrial equipment/vehicles)
• Class 3 driving license is bonus

Interested candidates who wish to apply for the advertised position, please click APPLY NOW or email an updated copy of your resume/cv.

We regret that only shortlisted candidate will be notified.

RecruitPedia Pte Ltd

EA License No: 19C9682

EA Personnel No: R23115674 (Chong Jia Jia)

Our client is from Oil and Gas industry. They are looking for a Senior Mechanical Engineer for the next phase of their business. They are located in West.

Duties:

• Responsible in guiding the maintenance, troubleshooting, repair, commissioning and substitute of mechanical or piping equipment within the Gas Engine Generators as well as its additional systems such as gas engine, pipeline, pressure pipe, ACMVs, lube oil and coolant pumps arrangement.
• Responsible in supporting mechanical support and solutions for the process & care and providing the development of care strategy including procedure/specification focusing on equipment dependability, spares inventory necessity, shutdown and inspection lists, preventive and prophetic care programmed.
• Responsible in managing and work meticulously with internal contractor and equipment seller to perform maintenance work at the Gas Engine Generators Building and terminal.
• Responsible to make certain compliance to appropriate regulations, manipulate safely, fit for object, maintainable and trustworthy for the site’s modified or anew build mechanical setup (such as gas engine, pumps, gravity vessel, safety facilities, etc).
• Responsible in guiding technical negotiations, execute and succeed project schedules or cost as well as collaboration with outward and internal shareholders, merchants for end of life and development project using company Management of Change process for machinery facilities.
• Responsible in supplying technical practicing as required in the area of process, maintenance, fault resolution of the Gas Engine Generators.
• Responsible in contacting with exterior investor including administration agencies on approbation and risk of closure of electrical arrangement that will influence gas-send out.

Requirements

• Min Bachelor’s Degree in Mechanical Engineering or any relevant field.
• Min 3 to 5 years’ experience in relevant industry for maintenance of rotary and staticequipment is needed
• Prior experience in different types of gas/diesel machine knowledges is a bonus.

Interested candidates who wish to apply for the advertised position, please click APPLY NOW or email an updated copy of your resume/cv.

We regret that only shortlisted candidate will be notified.

Email Address: [email protected]

Recruitpedia Pte. Ltd.

EA License No: 19C9682

EA Personnel No: R2198636 (Oh Puey Xin)

WhatsApp: +65 90820021 (Kyler)

Email: [email protected]

Salary: Basic $2500 - $3000 + incentive
Location: Sembawang
Working hours: 5 days, take turn (Mon – Fri // Tues – Sat), 9am – 6pm

Job Summary:
Sofa Upholstery, recliner mechanism and general furniture repair.

Job Responsibilities:

• Onsite and in-house repair of sofa and general furniture.
• Assembly and replacement of furniture and sofa parts.
• Inspection, photograph and video product issues and defects.
• Cleaning and servicing of carpentry residues and stone polishing.
• Leather and fabric creasing servicing, cushion and cover upholstery.
• Delivery and Assembly of furniture.
• Repair and Maintenance of furniture.

Job Requirements:

• 2 years’ experience in sofa and recliner assembly and upholstery.
• Experience in furniture installation and restoration.
• Experience in furniture carpentry & mechanical/electrical replacement.
• Class 3 driving license to drive a van will be a plus.
• Ability to operate power and hand tools, hydraulic jack & forklift or stacker.

The Supreme HR Advisory Pte. Ltd | 14C7279

Gan Kai Le | R23112683

Job Description

• Industry/ Organization Type: Shipbuilding and Repairing Service Provider
• Position Title: Ship Repair Engineer (Marine)
• Working Location: West (Nearest MRT: Clementi)
• Working Hours: 5.5 days (Mon-Fri: 8 am-5 pm, Sat: 8 am-12 pm)
• Salary Package: Up to SGD 4500 + AWS + Performance Bonus
• Duration: Permanent

Key Responsibilities

• Conduct repair operations and oversee them meticulously onboard vessels, in port areas, anchorages, or shipyard settings.
• Manage and oversee the scheduling and execution of projects to ensure prompt completion.
• Perform assessments and determine cost estimates for repair requests.
• Understand technical drawings.
• Generate detailed technical and service reports, compile worklists, and maintain comprehensive documentation.
• Foster strong, collaborative relationships with clients and colleagues across all organizational levels.

APPLY NOW!!!

• Min. ITE in Marine / Mechanical Engineering
• Min. 3 years experience in a similar capacity in marine industries
• Proficiency in Microsoft Office
• Comfortable working on weekends if required

Kindly apply through ANY of the following methods:

• Submit your application by clicking the APPLY button;
• Email your resume to Job(at)anradus.com.sg. Please indicate #66173 on the email subject.

Anradus Application Policy: We value each application and ensure every resume is reviewed. Our process is efficient, typically concluding within 3 working days. If you do not receive communication from us within this timeframe, it's likely that your application has not been shortlisted by our client. In such cases, we recommend continuing your job search to maximize your opportunities.

Anradus Pte Ltd | EA License No. 20C0161 | Celine Tan | EA Reg No.: R1873694