Responsibilities

• Assist in maintaining of building facilities on timely - servicing, inspection, equipment re-certification etc..
• Undertake minor repair and maintenance work.
• Conduct daily facilities inspection to identify any defect
• Determine and analyze the cause of defects, breakdowns and faults & provide suggestions to prevent any future occurrences
• Liaise and supervise contractors on facilities repair / renovation works to ensure acceptable standard of work
• Ensure that only authorize users have accessed to locked venue
• Other tasks as assigned by the Management

Requirements:

• Diploma holder in M&E / Civil Engineering or its equivalent
• 2 years of work experience in Facilities & Building Management
• Can work under minimal supervision and is pro-active

Job Description:

• Responsible for the maintenance activities work task as direct instruction by the Mechanical Supervisor or Engineer (Maintenance) to maintain machines and equipment in the prescribed condition.
• Hands-on experience in servicing of rotating equipment like various types of pumps, chain and belt conveyors, mixers, blowers, agitators, fans and rotary valves.
• Good knowledge in Laser alignment and independently able to do.
• Perform daily preventative maintenance and troubleshooting of pump failures.
• Hands-on experience in mechanical seal assembly.
• Able to read and understand the P&ID.
• Timely close all work orders assigned by supervisor in CMMS.
• Ensures quality of work within the set time frame.
• Ensure to maintain adequate use of tools, supplies and parts to accurately repair all equipment.
• Follow job method of statement and risk assessment to perform the job task.
• Attend daily tool box meetings.
• Always follow and make sure plant safety rules and regulations.
• Participate in monthly safety committee meetings.
• Conduct routine 5S at maintenance workshop, store, substations and work area at site.
• Reporting to the mechanical supervisor on daily work activity.
• Other duties as assigned.
• Safety is a core value at Veolia, and a precondition for employment. You are expected to uphold the Veolia Always Safe rules and set an example to all colleagues in your daily work routine.
• Ethics and compliance are two areas where our rules and our standards are strictly non-negotiable. You are expected to stick to ethics and compliance rules and standards which ultimately mean doing your job properly and conducting our business like true professionals, whatever our missions and our place in the Group.

Job Requirements:

• ITE or Diploma in Mechanical Engineering or equivalent is an advantage.
• At least 5 years of previous experience of working in static and rotating equipment in Chemical
• Process or Treatment Plant Industry.
• Good verbal and written communication skills.
• Good working knowledge in Microsoft applications (such as Word, Excel, PowerPoint, Project).
• Experience in using CMMS (Computerized Maintenance Management System) is an advantage.
• Ability to work weekends, holidays and respond to callouts on a non-routine basis.
• Other duties as assigned.

Successful candidate will be working in the main office located at 15 Tuas View Circuit Singapore 636968. Company transport is provided.

Roles and Responsibilities:

1. Performs total preventive maintenance (TPM) procedures as planned.

2. Performs inspections required by scheduled TPM or Work Order requests.

3. Performs basic troubleshooting on mechanical and hydraulic equipment.

4. Perform regular maintenance tasks at the facilities in accordance with the SOP.

5. Identify and pro-actively respond to maintenance and operation needs.

6. Support the Maintenance Supervisor (Mechanical) in performing the maintenance duties.

7. Allocate appropriate resources to execute the work order, follow up work order and ensure that resources are used to optimum effect.

8. Assessing the need of mechanical spare parts to avoid delays in TPM. Tool & instrument inventory/ maintenance.

9. Establish and run small workshop activities.

10. Identify and pro-actively respond to abnormality.

11. Trouble shoot equipment failure and execute TPM work.

12. Attend to equipment breakdowns and propose remedial actions and conduct follow up checks.

13. Work to incorporate efficient methods of maintaining new equipment or plant and involved in the installation and commissioning process.

14. Ensure all maintenance activities carried out are following relevant quality and environment policies, safety & environmental rules, and regulations requirements.

15. Supervise any external vendors providing maintenance services.

16. Support the maintenance Supervisor to develop and implement plant improvement plan.

17. Complete and maintain accurate, timely documentation and records as required by the Maintenance Supervisor.

18. Undertake any other duties as assigned by the management.

Requirements:

1. Minimum NITEC / Diploma in Mechanical Engineering or equivalent with 2 years of experience in a Power Plant environment.

1. Experience in Electrical field.
2. Possess good working knowledge of all operations in the plant.
3. Positive and highly motivated individual.
4. Possess can-do attitude.

• Candidate must possess at least Diploma/Advanced/Higher/Graduate Diploma in Engineering (Environmental/Health/Safety) or equivalent.
• At least 5 Year(s) of working experience in the related field is required for this position. Required Skill(s): Safety, Health, Environment, HSE Coordination, Safety compliance, Safety enforcement, Safety Supervision, Safety Administration, Safety roles and responsibilities Preferably Junior Executive specialized in Engineering - Environmental/Health/Safety or equivalent.
• The individual shall report to the Site Manager for the MPS BPA2 SDM 2018 project.
• You are to be involved in scheduled EHS activities. You will take the appropriate action to discourage employees from taking risks.
• Counsel and appropriately educate those who fail to consider the well-being of themselves and that of others around them.
• Develop the project EHS processes and deliver to the Project and Construction Manager.
• Guide the development of the site project orientation and coordinate the EHS Training program for all personnel coming to site. Participate in the EHS audit and inspection schemes being applied. Establish and maintain effective communications and coordination between Owner and FSME. Audit and monitor all FSME EHS Program, advise the Construction Manager and field supervisors of any shortfalls and provide specialist support.
• Participate in scheduled inspections of all work areas to ensure compliance on the part of FSME with regard to safe working practices and application of EHS program and ensure field personnel are monitoring their EHS performance.
• Review all incident investigation and Near Miss reports to ensure that the appropriate corrective actions are generated, and ensure that the project maintains records and documentation as per the statutory requirements.
• Monitor EHS status and periodically reports to the PM and SM on performance. Produce project EHS statistics and reports where applicable.
• Communicate Incident reports and lessons learnt to project personnel. Provide advice to FSME in the development of risk assessment. Advise supervisory staff and employees in the implementation of strategies to identify and control potential hazards.
• Provide assistance to site supervisors with Incident investigation and initiate analysis to discover accident trends and corrective actions.
• Attend SDM Pre-start and Toolbox Meetings. Conduct safety inspections and assessments. Assist supervisors to resolve hazard issues. Attend scheduled Project HSE meetings.
• Ensure the injury Management process is being adhered to and monitor & guide any rehabilitation or return to work requirements.
• Arrange and participate in site safety training activities as well as coordinate and/or conduct additional project specific employee safety training as identified through the project training needs analysis. To develop, update and implement the Project EHS Activity Plan as a tool to manage site EHS activities in a systematic manner.

Heavy vehicles driver

Prime move operations

Loading and unloading materials/goods/equipment others

Full spectrum of transportation requirements and assigned duties

Possess driving licences up to at least Class 4 in Singapore

OTE Certificate in Prime Mover (optional)

Clean traffic records

Team player with good interpersonal skills

Willing to work beyond contractual hours based on operational requirements

• Manage and process payroll for all workers on a timely basis, such as, computation of staff' salaries, allowances and deductions, processing of wages, statutory submissions, annual & ad hoc tax fillings, etc
• Manage claims from employees and with government authorities( Levy Waiver, etc)
• Supporting Employees and Management by driving, planning, coordinating and implementing effective HR guidelines, procedures and guidelines across the full spectrum of HR
• Analysis of Manpower resource allocation, visa quotas and emplyee satisfaction
• Manage work pass apllications, renewals & canncellations
• Manage the repatriation of work permit holders
• Putting together regular and ad hoc payroll and costing reports for management and employees
• Continuous improvement of HR systems and policies
• Ensuring training is implemented to ensure all necessary certificates and / or Licenses are obtained by the company under full compliance of regulations
• Maintaining employee record, employee payment details and health records, employee relation and communication

Job description

* As a HR generalist assisting in all HR and admin matters.

* Manage and record employees annual/sick leave.

* MOM work pass related matters including work pass application, renewal and cancellation and update for foreign worker's particulars.

* Update and maintain employee's date in hr system in accordance with company policies and MOM guidelines.

* Assist in staff on-boarding and off-boarding process and report regularly to the management.

* Handle employees enquires on all HR-related matters.

* Assist commercial work.

Requirements:

* Minimum Diploma in any discipline.

* Being able to speak Mandarin and English would be an added advantage.

* Good time management and prioritization capabilities, with the ability to multi-task and work with minimum supervisor and manager.

* Possess good communication and interpersonal skills.

• Ensure to achieve Company’s targeted yearly turnover.
• Ensures timely kick-off and proper handing-over of newly secured projects.
• Participates in project budget reviews and provide advice when required.
• Liaises with relevant parties to ensure all project disputes/ clarifications are settled.
• Attend site meeting, liaise with clients, subcontractors and suppliers and to ensure proper documentation. Sources, identify and secure new business opportunities for the Company.
• Ensuring all contractual requirements of all projects are fully complied with and responding to all contractual matters involving cost and time implications.
• Preparing tender documents and quantities, providing cost estimates, evaluating tender proposals, conducting project feasibility studies and managing cost information for all projects Assist on any contractual issues with client, subcontractor and consultants.
• Negotiate commercial terms conditions for new and existing contracts
• Involve project budgeting, controlling of cash flow and cost, processing of claims, contract payments and settlement of final accounts as well as maintaining proper documentation
• previous experience with façade would be advantage.
• Candidate must possess at least a Diploma, Professional Degree, Quantity Survey, Civil Engineering or equivalent.
• Able to speak English and Chinese.
• Required skill(s): AutoCad.
• Applicants must be willing to work in Gul Circle. 5.5workweek.

Job Description & Requirements

Job Description & Requirements

• Answers the telephone and provides exceptional customer service to internal and external customers.
• Drafts reports and correspondence.
• Orders supplies and equipment; maintains service contracts on office equipment.
• Attends meetings and takes meeting notes.
• Liaises with internal and external units to carryout job tasks.
• Assists managers and supervisors in developing policies and procedures.
• Provides front desk coverage as needed for backup.
• Ensures travel authorizations, accommodations, and conference registrations for employees.
• Audits/processes travel expense claims.
• Handles mileage reimbursement requests for supervision travel.
• Performs tracking and distributes monthly travel reports.
• Maintains accounts payable and accounts receivable records.
• Solves problems associated with vendors regarding shipments, billing, and statements.
• Monitors expenditures, processes payment requests for reimbursement; prepares purchase orders, purchase requisitions and ensures proper procedures for paying service providers, consultants, and contractors.
• Receives and audits invoices for accuracy and compliance and ensures prompt payment of departmental bills.
• Handles administrative tasks for faculty searches and staff recruiting.
• Handles event planning for meetings, professional development, and other department initiatives.
• Performs other related duties as assigned.

Responsibilities:

• Repairs, preventive maintenance and trouble shooting of precast automatic production machines and overhead cranes
• Able to interpret electrical circuit and mechanical drawings including pneumatic and hydraulics system
• Sound knowledge in PLC, inverter drives and direct-on-line controls
• Able to oversee maintenance team

Requirements:

• Diploma/ Degree in Electrical Engineering
• Min 1 year experience in maintenance of mechanical equipment
• 2-3 years experience in production machinery and industrial equipment
• Possess good written & spoken communication in English
• Able to work independently
• Working location : Tuas South

Job Description:

• Attend to all the maintenance & repair job required and ensure successful completion.
• Perform preventive maintenance in all production machines.
• Report and identify any defect or faults found during preventive maintenance.
• Perform routine maintenance, troubleshooting, and repairs on stamping presses, feeders, conveyors, and other related equipment.
• Inspect mechanical, hydraulic, pneumatic, and electrical systems to identify wear, damage, or potential failures.
• Develop and adhere to preventive maintenance schedules to minimize downtime and maintain equipment reliability.
• Conduct periodic inspections and adjustments to ensure machinery operates at peak performance.
• Use diagnostic tools, schematics, and blueprints to identify and resolve equipment malfunctions.
• Collaborate with engineering teams to implement effective solutions for recurring issues.
• Ensure proper operation of safety devices, sensors, and automation systems.
• Maintain detailed maintenance logs, repair records, and inventory of spare parts.
• Report significant issues, root cause analyses, and resolutions to supervisors or engineering teams.
• Ensure compliance with workplace safety regulations and company policies.
• Conduct regular inspections to verify equipment meets safety and quality standards.
• Suggest and implement process improvements to enhance equipment efficiency and reduce downtime.
• Participate in training programs to stay updated on new technologies and techniques in the industry.
• Any other duties as assigned by superior and/or management.

Requirements:

• Minimum NTC 3 in Mechanical/Electrical Fitting.
• Certification in maintenance and reliability (e.g., CMRP) is advantageous.
• 2–5 years of experience in maintenance within a stamping or manufacturing environment is highly desirable.

Responsibilities:

• Repairs, preventive maintenance and trouble shooting of precast automatic production machines and overhead cranes
• Able to interpret electrical circuit and mechanical drawings including pneumatic and hydraulics system
• Sound knowledge in PLC, inverter drives and direct-on-line controls
• Able to oversee maintenance team

Requirements:

• Diploma/ Degree in Electrical Engineering
• Min 1 year experience in maintenance of mechanical equipment
• 2-3 years experience in production machinery and industrial equipment
• Possess good written & spoken communication in English
• Able to work independently
• Working location : Tuas South

Brief Description & Role

This position is responsible for testing, troubleshooting, and repairing RF components and systems. You will work closely with cross functional teams to ensure the quality and performance of RF equipment, ensuring that all devices meet the required specifications and standards.

Responsibilities

1. Conduct comprehensive testing of RF devices, nodules, and systems to verify their performance, functionality and compliance with industry standards.
2. Ability to read and understand circuit schematics, layout and diagrams.
3. Able to perform RF tests, analyze test data and produce detailed reports outlining findings, and recommendation for improvements.
4. Maintain and operate various RF Test equipment like Spectrum Analysers, Vector Network Analyser (VNA), signal generators, noise figure measurement etc..
5. To perform failure analysis and debugging PCBs to component level.

Requirements

· Diploma /Bachelor in Electronics or Communication Engineering, or equivalence

· Preferably with at least 2 years of working experience in a product-based electronics manufacturing environment / product development.

Skills, Experiences & Knowledge

· Experience in automating test and measurements using bench test equipment.

· Knowledge of programming software in C, C#, Python or LabView.

· Experience with PCB design software

· Experience in antenna parameter measurement

· Preferably with soldering experience

· Excellent communication and documentation skills.

Reporting to the Engineering Manager, you are responsible for supporting and executing the setup of the Packaging operations. This involves working closely together with the Capital Project team to ensure Safety, Quality, Compliance and Operational aspects of the packaging lines are adequately included during the design and construction phase. Post construction and qualification, as the team prepares for commercial supply, you will support the engineering and maintenance activities to ensure they meet GMP, regulatory and supply requirements.

In this role, you will:

• Participate actively as part of the Site start-up team in equipment FATs and site qualification activities (IQ, OQ and PPQ) for Syringe and Vial Packaging lines.
• Shape data-driven decisions that solve business challenges and deliver on desired outcomes and people experience.
• Drive innovation, every plant area is a model area using MPS.
• Build future-ready manufacturing facility and position Singapore as strategic site for new products and innovation solutions in the Global Network.

Key Responsibilities:

Safety & compliance

• Uphold and comply with safety standards and never compromise on patient, team and personal safety.
• Participate in Safety, Health, and Environment (SHE) improvement initiatives.
• Implement corrective and preventive actions as recommended from investigations, regulatory inspections and internal audits.
• Understand and ensure Safety and cGMP requirements are met. Ensure equipment related activity is completed according to established procedures and all associated documentation is completed to a high standard.
• Participate in Emergency Response Team (ERT) as a team member when assigned.

Enhance and uphold Maintenance quality

• Execute maintenance and improvement activities within the IPT, ensure preventative maintenance is completed according to schedule requirements, and support equipment change control implementations.
• Reduce equipment downtime and enhance equipment performance through quality preventive maintenance works.
• Executes CMMS Work Instruction from Packaging line (e.g. Isolation and Reconnection of electrical supply, replace faulty part, troubleshoot, repair E/I and mechanical faults).

Operations excellence

• Support and meet performance metrics of the assigned operations.
• Proactively assess and carry out preventive maintenance and corrective repair works on packaging, robotic and conveying system.
• Contribute to maintain a high level of good housekeeping and carrying out operations within accepted GMP and HSE practices.
• Resolve issues in a timely manner and minimize equipment down time.
• Participate in Continuous improvement initiatives. Identify and report improvement for routine work activities.
• Highly effective worker; resourceful with a “get-it-done, can-do” attitude.

Problem solving

• Analyze and recommend solutions for identified issues.
• Support Production and Maintenance teams on problem solving and troubleshooting.
• Able to properly assess the situation and understand when to escalate to a higher level.
• Work together with the Engineering team to use 5S tool to maintain the working environment and perform Kaizen for improvement activities.

What are we looking for?

Qualifications & Experience

• Nitec/ Diploma in Mechanical / Mechatronics / Electrical or Instrumentation & Control Engineering.
• 3-5 years of maintenance experience in the chemical or semiconductor industry.
• Experience or knowledge of PLC’s/HMI’s, electrical protective devices will be an added advantage.
• Good oral/written communication and interpersonal skills.
• Knowledge and experience working within a Computerized Maintenance Management System (CMMS). Familiarity with SAP is a plus.
• Basic knowledge in using Microsoft Office, including MS Word, MS Excel, MS PowerPoint

Professional Competencies

• Resilient and resourceful
• Continuous learning mindset
• Foster teamwork and cross collaboration
• Strong work ethics
• Result driven mindset

Job Requirements

• Physically fit as the job requires employee to stand, walk, crouch, lift, twist, climb and reach.
• In addition, employee may be required to stand for a period of time, climb flights of stairs, and wear hearing protection equipment as required by the job.
• May be required to be on standby for any emergency repair after office hours, weekends and public holidays.

This is a career conversion programme under Workforce Singapore (WSG) and candidates must meet the following criteria and are open to the following conditions:

• Singaporeans/Singapore PRs only.
• PMETs/Mid-Careerist with minimum 2 years working experience.
• Open to two years contract.

WHAT YOU CAN EXPECT

• Limitless opportunities across various areas in Manufacturing; well-structured career path.
• A state-of-the-art facility that delivers solution to its customers world-wide.
• Highly engaging team that aims to innovate the future.

Key Responsibilities :

o Perform routine and preventative maintenance tasks on industrial packaging machines and equipment;

o Carry out repairs, troubleshooting, and maintenance work on mechanical and electrical systems;

o Keep records of maintenance and repair work, including ensure spare parts inventory equipped at all times;

o Maintain a clean and organized work area, adhering to safety and efficiency standards;

o Ensure maintaining spare parts inventory levels and ensuring proper care and protection of maintenance tools and equipment;

o Assist Maintenance Chief to identify and implement continuous improvement initiatives;

o Obtain quotes from suppliers and internet purchases for comparison to achieve the most cost effective solutions while maintaining quality standards;

o Provide weekly updates on the status of ongoing maintenance tasks, servicing issues, and outstanding parts orders.

Requirements :

o Minimum 5 years of experience in maintenance, repair, and troubleshooting of industrial machinery, preferably in a beverage manufacturing environment;

o Diploma, NITEC, NTC-2, or ITC in Mechanical, Mechatronic, or Electrical Engineering;

o Competent in Microsoft Office preferred - outlook, excel, word, and CAD;

o Knowledge of industrial machinery, including packaging equipment, conveyor system, boiler, chiller, compressor and cooling tower etc;

o Familiarity with Electrical motors (AC/DC), Pneumatic and hydraulic systems, Valves and actuators, Pumps, Gearboxes and transmission systems, Sensor technologies (e.g., temperature, pressure, level, flow), Boiler and chiller systems, Water treatment systems, Packaging machinery and Material handling equipment.

SUMMARY:

Responsible for the safe, reliable and cost effective maintenance and repair of the fleet and facilities by effectively planning and managing the workshop resources to maximise efficiency and productivity, in the process ensuring that scheduled work is completed on time and within budget, making due allowance for effectively dealing with the unscheduled work that arises during the course of daily operations. In meeting this prime objective, full compliance with all Company policies and procedures are mandatory with particular reference to health, safety and environmental legislation.

PRINCIPAL RESPONSIBILITIES AND AUTHORITIES:

• Responsible for running and updating the vehicle inspection, servicing and MOT plans on the computerised fleet management system.
• Responsible for allocating the details of the repeat and breakdown defects to the relevant Engineering Supervisor and ensuring that adequate remedial action is taken.
• Responsible for ensuring that all vehicle records are kept up to date and comply with all company policies, procedures and legislation.
• Identify and establish reasons for poor vehicle component performance, formally reporting such incidences to the Fleet Maintenance Manager with the full facts and implications.
• To manage and motivate the engineering team to achieve good standards of performance, level of commitment, awareness and motivation. Identify training and development needs and arrange appropriate training. Encourage staff to share their skills and knowledge.
• To develop and foster a culture of continuous improvement and problem solving amongst the engineering staff. In conjunction with technical personnel, strive for high levels of diagnostic skills to be attained.
• Undertake the delivery of regular tool box talks and team briefings to the engineering workforce documenting all such occasions and the attendees.
• Responsible for planning and controlling the engineering staff holidays and cover arrangements to ensure there are at all times sufficient levels of resource available on all shifts to meet the operational business requirements.
• Responsible for ensuring that adequate numbers of Engineering staff hold and maintain a valid vocational licence, planning for sufficient vocational licence holders to be on duty to provide adequate resource for workshop and on-the-road support throughout the traffic day.
• Develop the relationship between the stores and the workshop to promote cooperation. Arrange for the correct component parts to be available when scheduling vehicles for repair. Review stock levels to ensure they match demand without exceeding budgeted levels of stock holding.
• Monitor the performance of external contractors undertaking vehicle maintenance and repair to ensure quality of work and compliance with vehicle maintenance standards.
• Produce on a timely basis, engineering cost statements for use in third party insurance recoveries ensuring that all labour and material costs are accurately captured and documented.
• Consult with Trade Union Representatives with the objective of maintaining good industrial relations whilst exercising appropriate management leadership.
• Responsible for ensuring personal knowledge is maintained of all the relevant company policies and procedures and that they are adhered to at all times. Additionally, maintain a working knowledge of current legislation that is relevant to the engineering function.
• To provide cover for the Fleet Maintenance Manager, having available suitably trained support from an engineering supervisor to cover Workshop Planner duties.
• Contribute to the effective management of the engineering function on a day to day basis to develop and maintain good relations with the Operations Dept. who are ultimately the customer.
• Making sure of MAR result achieved at high rating.
• Undertake any additional reasonable duties at the request of the Line Manager.
• Undertake any training and development activities at the request of the Line Manager.

SKILLS, EXPERIENCE, CONDITIONS SPECIFICATION:

• Minimum of Diploma in engineering.
• Flexibility of working hours if effective control of the 24/7 engineering function is to be maintained.
• Man management, leadership and organisational skills are important and essential qualities that are relevant to the role.
• Computer literate with a broad knowledge of a range of software products.
• Knowledge of all the legislation relevant and necessary for running a safe and reliable vehicle fleet and engineering workshop.
• Conversant with the requirements that ensure safe and legally compliant operation of all workshop and depot plant and equipment.
• Experienced and competent in the use of computerised fleet and inventory management systems.

Responsibilities

• Responsible for achieving and growing company revenue.
• To develop new business and increase customer base.
• Identifies marketing opportunities of new customers.
• Participate in site showaround and be involved in tender and procurement.
• To prepare & monitor sales volume and revenues on a regular basis.
• Follow-up on sales enquiries email.

Requirements

• Possess at least a diploma in Civil Engineering or or relevant filed .
• Knowledge of basic engineering drawing.
• Preferably with prior experience in similar capacity in Architect firm and/or construction industry.
• Possess excellent interpersonal and communications skills
• A strong sense of achievement and motivation to excel in Sales.
• Able to speak fluently and write well in English and Mandarin (to handle queries and feedbacks from English and Mandarin speaking clients)
• Good initiative, well organized, meticulous and able to work independently.
• Class 3 driving license will be an advantage.

Interested candidates kindly submit your application to us.

Please include the following details in your resume

• Contact information
• Employment History
• Expected salary
• Date of availability
• Any educational & professional certification details.

Are you ready to be a part of team? Click the " APPLY NOW" button and we will get in touch with you soon.

• Familiar with Aluminium Extrusions Material/Products
• Carry out inspection and checking for all quality related procedures in the site and ensures activity at the site are as per approved method statement and inspection test plan.
• Able to prepare the Monthly Report, ITP, Material Approval, Quality Test Records, Request for Inspections and other documents concerning quality control.
• Able to assist the Project Manager during internal audit, external Quality Audit and audit to subcontractors.
• Knowledgeable in different quality controls on ground improvement works, ERSS, road works, concreting, and other civil works.
  Able to liaise with client when required to carry out inspection and obtain approval as per ITP for relevant activity.
• Able to handle quality issues that may arise in different trades and able to provide solutions acceptable to the client.
• Support Quality lead in managing daily QA/QC activity to ensure quality of products shipped out
• Support process validation qualification activity and production part approval process documentation.
  

Job Description & Requirements

• Ensure to achieve Company’s targeted yearly turnover.
• Ensures timely kick-off and proper handing-over of newly secured projects.
• Participates in project budget reviews and provide advice when required.
• Liaises with relevant parties to ensure all project disputes/ clarifications are settled.
• Attend site meeting, liaise with clients, subcontractors and suppliers and to ensure proper documentation. Sources, identify and secure new business opportunities for the Company.
• Ensuring all contractual requirements of all projects are fully complied with and responding to all contractual matters involving cost and time implications.
• Preparing tender documents and quantities, providing cost estimates, evaluating tender proposals, conducting project feasibility studies and managing cost information for all projects Assist on any contractual issues with client, subcontractor and consultants.
• Negotiate commercial terms conditions for new and existing contracts
• Involve project budgeting, controlling of cash flow and cost, processing of claims, contract payments and settlement of final accounts as well as maintaining proper documentation
• previous experience with façade would be advantage.
• Candidate must possess at least a Diploma, Professional Degree, Quantity Survey, Civil Engineering or equivalent.
• Able to speak English and Chinese.
• Required skill(s): AutoCad.
• Applicants must be willing to work in Gul Circle. 5.5workweek.

Job Description

Roles & Responsibilities
• Instruction taking from Superiors; Design Manager, Project Manager, etc and execute tasks with motivation;
• To design, draft, and meeting with clients & consultants;
• To execute task with contribution of effective methodologies in designs of applications;
• To motivated the team responsibly to accomplish the delegated task;

Requirements
• Min. Diploma of related studies in Building Construction Industry;
• Must with at least 3 to 5 years of local working experience in design, preferably in façade trade;
• Must be experienced in AutoCAD drafting and Revit modelling;

• Shop drawing, MTO and cutting list;
• Strong learning attitude with “never give-up” spirit;
• Preferably Singaporean to apply.

Location: East

Mon to Fri 8am to 5pm

Have AWS & bonus

Hands-on job

Job Requirement

1. Able to do PLC, HMI, programming with Mitsubishi and Omron brand.

2. Experience in handling Mitsubishi and Omron product servo motor products.

3. Understanding and being able to design automation electrical circuits.

4. Hard working and able to work hands on.

Requirements

• Diploma in Engineering
• At least 2 years experience

*Only shortlisted candidates will be notified*

Please submit your updated resume in MS format by using the APPLY NOW BUTTON.

Alternatively, you may also email your resume to us at [email protected]

Emily Fong

Senior Talent Specialist
Atomrecruit Pte. Ltd. | MOM EA License No.: 15C7443
EA Personnel Reg No.: R1768368

Company Description

Cogent Holdings Pte Ltd is a subsidiary of Cosco Shipping International (Singapore) Co., Ltd and a leading logistics provider with a wide range of clientele ranging from local SMEs to multinational companies. Cogent's main businesses comprise of warehousing, freight forwarding, container and ISO tank depot, automotive logistics, and transportation services in Singapore. It also operates warehousing and container depot businesses in Malaysia.

Role Description

This is a full-time on-site role for a Fleet Maintenance Admin Officer (Heavy Vehicles) for a third-party logistics company in Singapore. The incumbent will be responsible for the administrative duties related to the maintenance of heavy vehicles in the logistics operations, ensuring operational efficiency and compliance with safety standards.

· Provide administrative support workshop operations. i.e. recording of workshop inventory and sourcing for quotations on parts/ tools required.

· Perform renewal of company vehicle road tax and COE

· Monitor VPC quota and expiry date. Liaise with various parties including LTA for the renewal of VPC and perform the relevant preparation

· Oversee the administration of accident claims, liaising with the relevant parties in providing necessary documentation in the event of an accident

· Liaise with business units to retrieve the vehicle utilization data for each month for analysis purposes.

· Monitor rental lease period for vehicle & equipment, Request for leasing quotation and renew the lease when necessary.

· Prepare and submit various monthly reports on vehicle purchase, disposal and usage

· Assist in follow-up with business units on purchases to collate and compile the documents related to vendor evaluation

· Adhere to all company rules and regulations including safety rules

· Any other duties and responsibilities assigned from time to time

Requirements

· Minimum Diploma or equivalent certification in Logistics, Administration, or related field

· At least 2 years of admin experience in an in-house workshop or third-party logistics

· Proficient with Microsoft Office tools

· Knowledge of heavy vehicle regulations and safety standards is a plus

· Able to work effectively in a fast-paced environment

Other information

· 5.5 day work week (alternate Saturday half-day)

· Daily meal subsidy

· Medical, dental & insurance benefits

· Company Transport from Jurong East MRT

Responsibilities:

• Execute tasks / activities, standard maintenance and repair work such as Preventive, Corrective maintenance project executions at site effectively & efficiently
• Ensure all site executions are performed in accordance with all maintenance work procedures / OEM manuals / Vopak standards to ensure site quality, asset integrity and operability
• Ensure all site executions are performed in accordance with all Local Statutory and Vopak Safety processes to achieve good safety records / results
• Report any problems or issues with site facilities
• Process Permit-to-Work, Job safety Analysis (JSA), Lock-out, Tag-out (LOTO) or execute the Defeat of Safety Critical Equipment (DOSCE) during associate maintenance activities
• Participate and contribute in maintenance documentation review such as Safe Work Procedures (SWP), Job safety Analysis (JSA) and What-If Analysis
• Maintain work progress status and report to Supervisors on daily or adhoc basis
• Perform Work Executor in the Computerized Maintenance Management System (CMMS) workflow to receive, update and close up assigned Work Orders and checklist
• Support Maintenance Supervisor in ensuring that contractors or third party vendors execute maintenance tasks / activities at site effectively and efficiently
• Ensure that contractors carry out tasks/activities that adhered to safety, health and environment regulations and Vopak standards
• Mentor, guide technicians, junior technician in maintenance activities and job competency
• Help out in the supervision of Capex project execution
• Perform equipment or system testing / commissioning / Inspections / Pre-Startup Safety Review (PSSR) to properly handover to the Operations team after maintenance / project completion
• Standby as duty technician for emergency activation to perform corrective maintenance after working hours
• Suggest and execute ideas for continuous improvement in maintenance procedures and processes to improve or optimize maintenance costs, work processes and safety standards
• Assist to lead equipment training to the Operations dept or new trainees
• Practice good housekeeping
• Assist to maintain spare parts inventory levels, support on delivery checks by suppliers and maintain good preservation/housekeeping in the stores
• Only for Maintenance Senior Technicians - to mentor and guide technicians/junior technicians

Requirements:

• 3 years of relevant maintenance experience in similar industry
• ITE or Diploma equivalent in maintenance
• Familiar with and experience in Maintenance and inspection work
• Familiar with and experience in terminal equipment and assets
• Technically sound
• Familiar with terminal equipment and assets
• Familiar with terminal fire-fighting and emergency procedures
• Knowledge of safety, health and environment regulatory and practices
• Compliance with regulatory requirements
• Teamwork
• Mentoring experience is an advantage

Roles and Responsibilities

1. Provide general administrative support to related internal departments
2. Maintain proper filing of records, correspondences and documents
3. Data entry and payroll functions
4. Perform ad-hoc and other administrative duties as assigned by supervisor

Job Requirements

1. Minimum 1 year working experience, and proficient in Microsoft Office and basic accounting
2. Willingness to learn and good time management
3. Organised and detailed, who can work independently
4. 5 day work week: 8.30am to 6pm Monday to Friday.
5. Location: IMM Building

Responsibilities:

• IT infrastructure (Hardware and software), POS system installation and maintenance including remote troubleshooting
• Liaising with third part vendors for new store infrastructure setup
• Updating the store systems if it is needed
• Provide Level 1 and Level 2 support and standby for the store operation
• Conduct training new Supervisors in how to use all systems and how to handle minor technical issues
• Prepare system manual guidebooks of all software systems and editing for any updates
• Participate in UAT testing before GO-LIVE and release the new version
• Update windows and security patches of store POS and laptop and ensure cybersecurity
• Maintain store IT inventory list and update documentation on IT asset management
• Facility Management: Ensure the office space is in good condition by liaising with vendors or managing minor repairs as necessary
• Other ad hoc duties as assigned by superior

Requirements:

• 5 days work week (weekend included), (standby allowance)
• Minimum Diploma in Information Technology or equivalent
• At least 2 years’ working experience in the related field - preferably with retail sector
• Good knowledge of Microsoft windows operating systems
• On-site support and resolution of all software and equipment issues
• Excellent analytical, troubleshooting and communication skills
• Ability to work in a fast-pace and dynamic environment
• Good understanding of Microsoft SQL server and scripts