Job Description

We are looking for a Service Engineer as Maintenance Lead to lead and supervise the maintenance team in maintaining and managing system hardware and networks at customer site located over Singapore island to meet the contractual Service Level Agreement (SLA). The Service Engineer shall report to and under the supervisory of the Maintenance Manager.

Job Responsibilities

• Assist the Manager in Preventive Maintenance (PM) and Corrective Maintenance (CM) tasks and devise maintenance schedule and resources planning and deployment.
• Provide solution guidance to the Service Technicians and generation of maintenance documentation such as PM & CM report to Manager for review and final release to customer.
• Provide CM on faults to establish root cause on an ad-hoc basis including I-level & D-level testing and troubleshooting on equipment
• Plan and perform PM to system equipment at scheduled/ periodic basis including O-level testing and sensors calibration to ensure optimal operational performance
• Collaborate with OEM to establish root cause of fault findings and D-level components repair
• Supervise sub-contractor performing maintenance at site
• Convey updates to Manager and customer on maintenance progress.
• Review with Manager on maintenance processes and resources etc for maintenance process improvement.

Requirements

• Holding recognised Professional Certificate minimum with Higher Nitec/Diploma/ Degree in Electronics/ Electrical/ Mechanical /Mechatronics/ Aerospace Engineering or equivalent from recognised institution or at least 5-yearsworking experiences in above mentioned engineering fields.
• Advantage if have the knowledge and experience working with sensor, control, automation, and Information Technology (IT) system troubleshooting
• Resourcefulness and logical in problem-solving aptitude.
• Able to travel and work under non-conducive environment including site located at offshore island, buoys and in high security areas such as military base, and airport etc
• Ability to lead and manage a team, and to work independently with minimum supervision.
• Ability to conduct risk assessment and provide advisory to the team member and Manager.
• Preferably holding a Class 3 driving license and familiar with Environmental, Health and Safety (EHS).
• Ability to converse well in English language and technically.

Responsibilities:

• Perform preventive and corrective maintenance on radio, network, and wireless equipment.
• Run tests, troubleshoot, and replace faulty equipment as needed.
• Assist in supervising site works and subcontractors.
• Communicate with customers and stakeholders about project updates.
• Be available for 24/7 standby and adapt to changing work schedules.

Requirements:

• ITE/Diploma in Electrical/Electronic Engineering or related field.
• Experience with radio, networking, and wireless equipment.
• Strong troubleshooting skills, especially in remote locations.
• Ability to read and understand technical documents and drawings.
• Proficiency in MS Word and Excel.
• Possess a valid Class 3/3A driving license and own vehicle

Location: East

Mon to Fri 8am to 5pm

Have AWS & bonus

Hands-on job

Job Requirement

1. Able to do PLC, HMI, programming with Mitsubishi and Omron brand.

2. Experience in handling Mitsubishi and Omron product servo motor products.

3. Understanding and being able to design automation electrical circuits.

4. Hard working and able to work hands on.

Requirements

• Diploma in Engineering
• At least 2 years experience

*Only shortlisted candidates will be notified*

Please submit your updated resume in MS format by using the APPLY NOW BUTTON.

Alternatively, you may also email your resume to us at [email protected]

Emily Fong

Senior Talent Specialist
Atomrecruit Pte. Ltd. | MOM EA License No.: 15C7443
EA Personnel Reg No.: R1768368

Our client is from Oil and Gas industry, a local leading player. They are looking for a Electrical Maintenance Supervisor for the next phase of their business. They are located in West.

Duties:

• Ensure compliance with safety procedures and electrical codes.
• Supervise and lead electrical technicians and contractors in installation, maintenance, and repair of systems.
• Develop and conduct structured on-the-job training for E&I team members.
• Inspect and ensure quality control of all electrical works.
• Review and approve electrical isolation and excavation permits.
• Lead investigations into electrical maintenance issues, identifying root causes and implementing solutions.
• Collaborate with engineers to develop and implement maintenance programs for reliability.
• Conduct morning toolbox meetings focusing on safety and maintenance activities.
• Participate in emergency response procedures with assigned roles and responsibilities.

Requirements

• Min Diploma in Electrical Engineering related field.
• Min 8 years’ experience in Oil & Gas or Petrochemical industry
• Experience in E&I maintenance and supervisory

Interested candidates who wish to apply for the advertised position, please click APPLY NOW or email an updated copy of your resume/cv.

We regret that only shortlisted candidate will be notified.

Email Address: [email protected]

Recruitpedia Pte. Ltd.

EA License No: 19C9682

EA Personnel No: R2198636 (Oh Puey Xin)

SIA Engineering is recruiting a number of positions for our Singapore Operations located in Changi ( East side of the island ).

Available roles include the following :

1. Aircraft Technicians ( B1 )
2. Avionics Technicians ( B2 )

Requirements :

• Applicants who applied for the above role must have experienced in similar role(s) in other companies.
• Must have relevant Engineering qualifications
• Must have necessary supporting documents/certifications to prove qualifications
• Willing to work in Singapore
• Ability to speak and write in English language is compulsory
• Immediately available candidates are welcomed

Shortlisted candidates would be contacted for an online interview.

At SIA Engineering, we are committed to ensuring your personal information is protected and never misused. Personal data collected will be used or disclosed only for the purposes of your job application and potential employment with SIA Engineering, such as for assessing and evaluating your suitability for employment in any current or prospective position within the organization and verifying your identity and accuracy of the personal details and other information provided.

By submitting your application for this position, you consent to:

A) The collection, use and disclosure of your personal data by SIA Engineering for the purposes of your application and potential employment with SIA Engineering, including disclosing such personal data to any of SIA Engineering’s subsidiaries, affiliates or related corporations (if necessary for the processing of your job application); and

B) SIA Engineering’s retention of your personal data for 1 year for consideration of future job opportunities (where applicable)

Job title

Building Maintenance Technician

Company

BRILLIANT ENGINEERING PTE LTD

Location

Singapore

Salary and Benefits

Up to $2,800.00 per month

Supplemental Pay: Overtime pay

Job type

Full-time, Permanent

Job description

Responsibility:

- Perform Preventative Maintenance and ensure all M&E system operate efficiently and conform to operating standards

- Attend to urgent complaints and repair work on Air-conditioning and M&E system

- Daily update on work progress to supervisor in charge

- Comply with company safety procedures

- Any other duties as assigned

Requirement:

- Willing to travel around site and work overtime when required

- Must be physically fit and able to climb ladder

- Candidate with no experience are welcome to apply

- Your CV with current and expected salary, notice period (they are a must)

This position ensures that all aspects of building and facilities maintenance in the Schools is at optimum operational condition and conforms to up to date regulatory and safety requirement at all times.

Job Responsibilities:

• Preventative maintenance and ensure all facilities operate efficiently and conform to operating standards.
• Hands-on in meeting urgent repairs/complaints on electrical services, plumbing and sanitary requests.
• Proper maintenance of interior and exterior walls of buildings, appliances and equipment in the building.
• Conduct day to day inspection activities/ checking building wear & tear and defects
• Mobilise and supervise contractors on major / rectification works.
• Ensure compliance with all regulatory and safety regulations
• Comply with company safety guidelines and procedures
• Ensure accurate updates/reports are done for all work progress and completion.
• Monitors and controls expenses within all areas of the department.
• Lead and mentor a team of maintenance technicians.
• Any other duties that is assigned, inclusive of support for new school projects.

Requirements:

• Relevant Diploma/Higher Nitec/Nitec with 3 years relevant experience or
• 5 years of relevant working experience in major building maintenance/construction projects
• Possess a class 2B/3 license with own transport.

We offer a competitive remuneration package plus benefits to the right candidate. Suitably qualified applicants are invited to send your updated resume in MS Word via APPLY NOW button.

Please include cover application letter and detailed CV with current and expected salary and copies of qualifications and testimonials. On appointment original copies must be provided for verification.

Our client is from Oil and Gas industry, a local leading player. They are looking for a Maintenance Technician for the next phase of their business. They are located in West.

Duties:

• Perform preventive, predictive, and corrective maintenance tasks as directed, and update the CMMS database.
• Maintain rotating and static equipment, plant piping, and structural support systems.
• Respond to and resolve equipment malfunctions, ensuring minimal downtime.
• Determine necessary materials, tools, and methods for safe maintenance tasks.
• Conduct machinery condition monitoring and field data collection with the production team.
• Ensure operational efficiency of all plant valves and mechanical components, including control and plant valve maintenance.
• Supervise in-house contractors and vendors, ensuring safety protocols are followed.
• Collaborate with the production team on mechanical system testing and troubleshooting.
• Take on additional tasks or responsibilities as assigned.
• Perform valve line-up and LOTO for maintenance preparations.
• Participate in the Company's Emergency Response Team (CERT) with assigned roles.

Requirements

• Nitec in Engineering related field.
• Min 5 years’ experience in Oil & Gas or Petrochemical industry
• Experience in troubleshooting of mechanical/ machinery systems

Interested candidates who wish to apply for the advertised position, please click APPLY NOW or email an updated copy of your resume/cv.

We regret that only shortlisted candidate will be notified.

Email Address: [email protected]

Recruitpedia Pte. Ltd.

EA License No: 19C9682

EA Personnel No: R2198636 (Oh Puey Xin)

Our client is from Oil and Gas industry, a local leading player. They are looking for a Mechanical Maintenance Supervisor for the next phase of their business. They are located in West.

Duties of Mechanical Maintenance Supervisor:

• Supervise in-house contractors and vendors to ensure safe and efficient execution of mechanical tasks.
• Develop and update maintenance plans and schedules to minimize production disruptions.
• Analyze equipment performance to identify issues and propose improvements.
• Ensure maintenance plans meet engineering standards and compliance with regulations.
• Prepare maintenance documentation, including checklists and risk assessments.
• Achieve maintenance KPIs and support technician training and development.
• Manage manpower, including overtime and emergency planning.
• Oversee spare parts and warehouse activities, including stock management and ordering.
• Handle service contract scopes, PR, and evaluations.
• Forecast, monitor, and manage maintenance budget.
• Participate in emergency response and assume relevant roles as needed.

Requirements

• Min Diploma in Mechanical Engineering related field.
• Min 8 years’ experience in Oil & Gas or Petrochemical industry
• Experience in mechanical maintenance and supervisory

Interested candidates who wish to apply for the advertised position, please click APPLY NOW or email an updated copy of your resume/cv.

We regret that only shortlisted candidate will be notified.

Email Address: [email protected]

Recruitpedia Pte. Ltd.

EA License No: 19C9682

EA Personnel No: R2198636 (Oh Puey Xin)

Job Scope:

1. Input up-to-date research findings and prospect data into database.
2. Conduct simple research on prospective donors using public sources to help identify new individuals and corporates who could donate, and to help compile profiles to prepare fundraisers.
3. Compile and update donation and fund related information in the departments CRM database.
4. Provide support in preparation of data for development of new data analytics projects, e.g., studying effectiveness of email content.
5. Other basic database admin connected to prospects and donors.

Working Arrangement:

Working Hours:

Location: Nanyang Avenue

Salary: $2000-$2800/Month

Contract Duration: 6 Months (renewable subject to performance)

Requirements:

1. Minimum A-Levels/Diploma qualification
2. Possess experience working on databases and reviewing and collating quantitative data or qualitative information from public sources.
3. Possess some research experience and skills (e.g. academic/study research, market research, fundraising research).
4. Knowledge of MS Office applications including MS Excel and Word.
5. Ability to work on tight deadlines and work independently and in a team.
6. Demonstrate resourcefulness and flexibility.

EA License No.: 96C4864

Reg. No.: R22110485

Our client is from Oil and Gas industry. They are looking for a Maintenance Scheduler (E&I) to assist their team for the next phase of their business. They are located in West.

Duties:

• Plan and schedule daily maintenance tasks for Electrical & Control assets.
• Coordinate with Mechanical, HSSE, Production, and Jetty Operations teams on work requests and permits.
• Liaise with authorities for natural gas equipment maintenance approvals.
• Coordinate with external vendors and contractors for site surveys and work execution.
• Ensure validity of Method of Statement and risk assessments.

Requirements:

• Minimum Bachelors Degree in Electrical Engineering or any relevant field.
• Minimum 5 to 8 years of E&I experience in Oil and Gas Industry or any relevant industry.

Interested candidates who wish to apply for the advertised position, please click APPLY NOW or email an updated copy of your resume/cv. We regret that only shortlisted candidate will be notified.

Email address: [email protected]

Recruitpedia Pte. Ltd.

EA License No. 19C9682
EA Reg. No. R22108850 (Chan Mun Mun)

Reporting to the Engineering Manager, you are responsible for supporting and executing the setup of the Packaging operations. This involves working closely together with the Capital Project team to ensure Safety, Quality, Compliance and Operational aspects of the packaging lines are adequately included during the design and construction phase. Post construction and qualification, as the team prepares for commercial supply, you will support the engineering and maintenance activities to ensure they meet GMP, regulatory and supply requirements.

In this role, you will:

• Participate actively as part of the Site start-up team in equipment FATs and site qualification activities (IQ, OQ and PPQ) for Syringe and Vial Packaging lines.
• Shape data-driven decisions that solve business challenges and deliver on desired outcomes and people experience.
• Drive innovation, every plant area is a model area using MPS.
• Build future-ready manufacturing facility and position Singapore as strategic site for new products and innovation solutions in the Global Network.

Key Responsibilities:

Safety & compliance

• Uphold and comply with safety standards and never compromise on patient, team and personal safety.
• Participate in Safety, Health, and Environment (SHE) improvement initiatives.
• Implement corrective and preventive actions as recommended from investigations, regulatory inspections and internal audits.
• Understand and ensure Safety and cGMP requirements are met. Ensure equipment related activity is completed according to established procedures and all associated documentation is completed to a high standard.
• Participate in Emergency Response Team (ERT) as a team member when assigned.

Enhance and uphold Maintenance quality

• Execute maintenance and improvement activities within the IPT, ensure preventative maintenance is completed according to schedule requirements, and support equipment change control implementations.
• Reduce equipment downtime and enhance equipment performance through quality preventive maintenance works.
• Executes CMMS Work Instruction from Packaging line (e.g. Isolation and Reconnection of electrical supply, replace faulty part, troubleshoot, repair E/I and mechanical faults).

Operations excellence

• Support and meet performance metrics of the assigned operations.
• Proactively assess and carry out preventive maintenance and corrective repair works on packaging, robotic and conveying system.
• Contribute to maintain a high level of good housekeeping and carrying out operations within accepted GMP and HSE practices.
• Resolve issues in a timely manner and minimize equipment down time.
• Participate in Continuous improvement initiatives. Identify and report improvement for routine work activities.
• Highly effective worker; resourceful with a “get-it-done, can-do” attitude.

Problem solving

• Analyze and recommend solutions for identified issues.
• Support Production and Maintenance teams on problem solving and troubleshooting.
• Able to properly assess the situation and understand when to escalate to a higher level.
• Work together with the Engineering team to use 5S tool to maintain the working environment and perform Kaizen for improvement activities.

What are we looking for?

Qualifications & Experience

• Nitec/ Diploma in Mechanical / Mechatronics / Electrical or Instrumentation & Control Engineering.
• 3-5 years of maintenance experience in the chemical or semiconductor industry.
• Experience or knowledge of PLC’s/HMI’s, electrical protective devices will be an added advantage.
• Good oral/written communication and interpersonal skills.
• Knowledge and experience working within a Computerized Maintenance Management System (CMMS). Familiarity with SAP is a plus.
• Basic knowledge in using Microsoft Office, including MS Word, MS Excel, MS PowerPoint

Professional Competencies

• Resilient and resourceful
• Continuous learning mindset
• Foster teamwork and cross collaboration
• Strong work ethics
• Result driven mindset

Job Requirements

• Physically fit as the job requires employee to stand, walk, crouch, lift, twist, climb and reach.
• In addition, employee may be required to stand for a period of time, climb flights of stairs, and wear hearing protection equipment as required by the job.
• May be required to be on standby for any emergency repair after office hours, weekends and public holidays.

This is a career conversion programme under Workforce Singapore (WSG) and candidates must meet the following criteria and are open to the following conditions:

• Singaporeans/Singapore PRs only.
• PMETs/Mid-Careerist with minimum 2 years working experience.
• Open to two years contract.

WHAT YOU CAN EXPECT

• Limitless opportunities across various areas in Manufacturing; well-structured career path.
• A state-of-the-art facility that delivers solution to its customers world-wide.
• Highly engaging team that aims to innovate the future.

Benefits

• Hotel near Dhoby Ghaut MRT
• Basic salary up to $2,600
• Night Shift allowance and meal provided

Challenges:

• Perform preventive maintenance and repair work for the building and equipment
• Provide AV support to events
• Provide equipment installation, refurbishment
• Maintain equipment checklist and recording of routine checks
• Co-codinate work order with other departments
• Attend to emergency, fire alarm, flooding and electrical failure
• Inspect and/or supervise on M&E contractors’ repair work and servicing
• Compliance with safety rules and regulations and maintain clean and orderly work areas
• Any other duties may be assigned from time to time

What it Takes:

• Min NITEC or Diploma in Mechanical & Electrical
• Min 2 years relevant experience with hotel/apartment/condominiums experience preferred
• Good knowledge of general maintenance processes and methods
• Sound working knowledge of mechanical and electrical systems, plumbing and sanitary, air-conditioning and mechanical ventilation, fire protection and chiller
• Able to work on 3 rotating shifts

Interested applicants, please send your updated resume to [email protected]

Talents@Work Ptd Ltd (21C0501)

Chan Chin Long (R23116697)

About ST Engineering

ST Engineeringis a global technology, defence, and engineering group with offices across Asia, Europe, the Middle East, and the U.S., serving customers in more than 100 countries. The Group uses technology and innovation to solve real-world problems and improve lives through its diverse portfolio of businesses across the aerospace, smart city, defence, and public security segments. Headquartered in Singapore, ST Engineering ranks among the largest companies listed on the Singapore Exchange.

Our history spans more than 50 years, and our strategy is underpinned by our core values – Integrity, Value Creation, Courage, Commitment and Compassion. These 5 core values guide every aspect of our business and are embedded in our ST Engineering culture – from the people we hire, to working with each other, to our partners and customers.

About our Line of Business – Unmanned & Integrated Systems

Our Unmanned & Integrated Systems business offers holistic solutions in system engineering and integration. We pioneer maritime robotics and autonomy solutions, provide system integration for complex naval and island air defence System-of-Systems (SoS), and take care of the operation and maintenance of Command, Control, Communications, Computers Intelligence (C4I) systems. We cater to the needs of Defence, Public Safety & Security, and Commercial clients worldwide, providing seamless and innovative services that redefine possibilities.

Together, We Can Make A Significant Impact

You will work closely with other engineers, Service Delivery Managers (SDM) and Project Managers to deliver quality network maintenance services to our customers.

Be Part of Our Success

• Carry out maintenance works (servicing, repair, overhaul) on customers' operational systems.
• Perform troubleshooting and corrective maintenance work safely.
• Supervise sub-contractors to ensure high quality of work and compliance with safety work procedures.
• 24/7 standby for maintenance support when rostered.
• Other duties as assigned by Department Manager and SDM.

Qualities We Value

• Individuals with deep experience in generator, cooling and hydraulic systems maintenance may apply.
• Basic knowledge in computer networking or IT systems an advantage.
• Team player.
• Able to work independently.
• Able to work under pressure with good time management skills.
• Good written and verbal communication.
• Good interpersonal skills (interaction with customers at site will be required).
• Knowledge of SAP system an advantage.
• Singaporean only

Our Commitment That Goes Beyond the Norm

• An environment where you will be working on cutting-edge technologies and architectures.
• Safe space where diverse perspectives are valued, and everyone’s unique contributions are celebrated.
• Meaningful work and projects that make a difference in people’s lives.
• A fun, passionate and collaborative workplace.
• Competitive remuneration and comprehensive benefits.

Working Location: Sembawang (may be deployed to other camp sites)

Responsibilities:

1. Oversee, manage, and supervise both in-house teams and external contractors for all mechanical maintenance tasks, including:Daily maintenance (preventive, corrective, and breakdown).
   Transition maintenance.
   Turnaround maintenance.
   Upgrades and maintenance-related improvements.
   
2. Ensure all mechanical maintenance activities align with the company’s HSEQ standards, Maintenance Management System, statutory regulations, and industry best practices.
3. Develop, enhance, and execute the company’s maintenance management system to ensure safety, efficiency, and effectiveness, achieving optimal equipment reliability and availability.
4. Maintain and update accurate maintenance records to support robust data analysis and facilitate troubleshooting.
5. Conduct root cause analyses to address equipment or system defects and implement appropriate preventive and corrective measures.
6. Optimize and manage the inventory of critical and non-critical equipment spare parts to support mechanical maintenance needs.

Minimum Requirements:

• Bachelor’s degree in Mechanical Engineering.
• Familiarity with static and rotating equipment.
• At least three (3) years of experience in a chemical process plant.

Key Competencies:

• Strong interest and aptitude for chemical processes.
• Analytical skills to assess and resolve maintenance challenges.
• Ability to perform effectively under pressure.
• Excellent communication skills with the ability to collaborate across functions.
• Effective problem-solving capabilities.

Our client is from Oil and Gas industry. They are looking for a Electrical & Control Maintenance Supervisor to assist their team for the next phase of their business. They are located in West.

Duties:

• Lead and supervise electrical technicians and contractors in system installation, maintenance, and repair.
• Develop and conduct on-the-job training programs for E&I team members.
• Perform site inspections and quality control for electrical work.
• Review and approve electrical isolation, excavation, and related permits.
• Investigate electrical maintenance issues, identify root causes, and implement solutions.
• Collaborate with other engineers to ensure equipment reliability through effective maintenance programs.

Requirements:

• Minimum Bachelors Degree in Electrical Engineering or any relevant field.
• Minimum 8 to 12 years experience in Oil and Gas Industry or any relevant industry.

Interested candidates who wish to apply for the advertised position, please click APPLY NOW or email an updated copy of your resume/cv. We regret that only shortlisted candidate will be notified.

Email address: [email protected]

Recruitpedia Pte. Ltd.

EA License No. 19C9682
EA Reg. No. R22108850 (Chan Mun Mun)

Our client is from Oil and Gas industry. They are looking for a Maintenance Scheduler (E&I) to assist their team for the next phase of their business. They are located in West.

Duties:

• Plan and schedule daily maintenance tasks for Electrical & Control assets.
• Coordinate with Mechanical, HSSE, Production, and Jetty Operations teams on work requests and permits.
• Liaise with authorities for natural gas equipment maintenance approvals.
• Coordinate with external vendors and contractors for site surveys and work execution.
• Ensure validity of Method of Statement and risk assessments.

Requirements:

• Minimum Bachelors Degree in Electrical Engineering or any relevant field.
• Minimum 5 to 8 years of E&I experience in Oil and Gas Industry or any relevant industry.

Interested candidates who wish to apply for the advertised position, please click APPLY NOW or email an updated copy of your resume/cv. We regret that only shortlisted candidate will be notified.

Email address: [email protected]

Recruitpedia Pte. Ltd.

EA License No. 19C9682
EA Reg. No. R22108850 (Chan Mun Mun)

Job Description

• Industry/Organization Type: Waste Management Company
• Position Title: Operation Technician, Team Leader (Chemical Plant/Incinerator)
• Working Location: Tuas (Transportation Provided)
• Working Hours: Monday – Friday, 8 am – 5 pm; Saturday, 8 am – 12 pm/Shift Work: Day – 8 am – 8 pm, Night – 8 pm – 8 am
• Salary Package: Gross up to $4,500 (Basic + OT/Shift Allowance) + Company Transport/Transport Allowance + AWS + Quarterly Incentives + Performance Bonus + Joining Bonus
• Duration: Permanent

Key Responsibilities

• Oversee the daily operation and process control of the incinerator and boiler turbine plants.
• Develop strategies and implement plans to enhance operational efficiencies and reduce costs.
• Manage the daily requirements of consumables, tools, and equipment for the plant.
• Oversee budget planning and cost management for maintenance operations.
• Establish and enforce operational procedures according to ISO & OHSAS standards, including training and communication to staff.
• Conduct regular inspections and prepare plant equipment for audits and inspections to meet all regulatory and safety standards.
• Ensure adherence to environmental regulations concerning air pollutants.
• Develop and maintain detailed maintenance schedules, managing manpower for both routine and shutdown maintenance effectively.
• Coordinate with other departments to manage power distribution and communicate any potential interruptions.
• Supervise, motivate, and lead a team of technicians and operators, ensuring high performance and compliance with safety standards.
• Develop and conduct in-house training for staff on operations, maintenance, emergency responses, and safety procedures.
• Manage documentation, records, and operational data analysis and reporting.
• Monitor and ensure contractor compliance with safety standards during maintenance works.
• Regularly review and assess contractor performance.
• Support the engineering department in maintaining and upgrading plant facilities, including developing preventive maintenance plans.

APPLY NOW!!!

• Diploma in Mechanical Engineering, Chemistry, or relevant field.
• Minimum of 3 years of supervisory experience in maintenance operations, preferably in rotary kiln incinerator or boiler operations.
• Ability to work in a 12-hour rotating shift pattern.
• In-depth knowledge of industry-specific safety and environmental regulations.

Kindly apply through ANY of the following methods:

• Submit your application by clicking the APPLY button;
• Email your resume to Job(at)anradus.com.sg. Kindly indicate #69800 on the email subject.

Anradus Application Policy: We value each application and ensure every resume is reviewed. Our process is efficient, typically concluding within 3 working days. If you do not receive communication from us within this timeframe, it's likely that your application has not been shortlisted by our client. In such cases, we recommend continuing your job search to maximize your opportunities.

Anradus Pte Ltd | EA License No. 20C0161 | Norman Wee | EA Reg No.: R23115114

• Well Established Company
• Basic $2200 - $2700 + OT + AWS + Variable Bonus
• Excellent Welfare and Benefits + Career progression
• Working location: Tuas (Transport Provided)
• 5.5 Working days

Job Responsibilities:

• To conduct final sample preparation in final sampling room
• To conduct laboratory analysis and reporting
• To assist chemist in technical development project
• To maintain the inventory of all laboratory facilities/ equipment
• To check, record and report on the inventory of all laboratory supplies
• To carry out calibration and maintenance of all laboratory equipment as per schedule or instructed
• To ensure good housekeeping in the laboratory
• To follow the existing system and documentation as per the procedures
• To update the relevant records

Requirements:

• At least ITE or Diploma in Chemistry/Chemical Process Technology/Material Science or equivalent
• Working experience in precious metal/ base metal is an added advantage

Candidates are encouraged to apply this position via Apply Now button with the following information in the resume

• Work experiences and job responsibilities
• Current and Expected salary
• Reason for leaving
• Date of availability
• Education background

We regret that only shortlisted candidates will be contacted.

THIEN CHING MEI (R2198032)

EA Recruitment Pte Ltd

EA License No: 21C0492

Our client is from Oil and Gas industry. They are looking for a Senior Mechanical Engineer for the next phase of their business. They are located in West.

Duties:

• Responsible in guiding the maintenance, troubleshooting, repair, commissioning and substitute of mechanical or piping equipment within the Gas Engine Generators as well as its additional systems such as gas engine, pipeline, pressure pipe, ACMVs, lube oil and coolant pumps arrangement.
• Responsible in supporting mechanical support and solutions for the process & care and providing the development of care strategy including procedure/specification focusing on equipment dependability, spares inventory necessity, shutdown and inspection lists, preventive and prophetic care programmed.
• Responsible in managing and work meticulously with internal contractor and equipment seller to perform maintenance work at the Gas Engine Generators Building and terminal.
• Responsible to make certain compliance to appropriate regulations, manipulate safely, fit for object, maintainable and trustworthy for the site’s modified or anew build mechanical setup (such as gas engine, pumps, gravity vessel, safety facilities, etc).
• Responsible in guiding technical negotiations, execute and succeed project schedules or cost as well as collaboration with outward and internal shareholders, merchants for end of life and development project using company Management of Change process for machinery facilities.
• Responsible in supplying technical practicing as required in the area of process, maintenance, fault resolution of the Gas Engine Generators.
• Responsible in contacting with exterior investor including administration agencies on approbation and risk of closure of electrical arrangement that will influence gas-send out.

Requirements

• Min Bachelor’s Degree in Mechanical Engineering or any relevant field.
• Min 3 to 5 years’ experience in relevant industry for maintenance of rotary and staticequipment is needed
• Prior experience in different types of gas/diesel machine knowledges is a bonus.

Interested candidates who wish to apply for the advertised position, please click APPLY NOW or email an updated copy of your resume/cv.

We regret that only shortlisted candidate will be notified.

Email Address: [email protected]

Recruitpedia Pte. Ltd.

EA License No: 19C9682

EA Personnel No: R2198636 (Oh Puey Xin)

Our client is a global MNC in Industrial Waste Management industry. They are looking for a Mechanical Maintenance Supervisor for the next phase of their business. They are located in West.

Duties Mechanical Maintenance Supervisor:

• Collaborate with the commissioning team to inspect, test, and repair equipment as needed.
• Support maintenance work planning and scheduling alongside the engineer.
• Assign and track individual tasks, ensuring timely and high-quality completion.
• Maintain adequate inventory of tools, supplies, and parts for effective equipment repairs.
• Perform mechanical fitting tasks, including alignment, grinding and cutting.
• Servicing, repairing, and overhauling equipment such as pumps and blowers when required.

Requirements

• Diploma in Mechanical Engineering or related field
• Min 3 - 5 years’ maintenance experience in similar industries such as Water Treament, Chemical and Oil & Gas

Interested candidates who wish to apply for the advertised position, please click APPLY NOW or email an updated copy of your resume/cv.

We regret that only shortlisted candidate will be notified.

Email Address: [email protected]

Recruitpedia Pte. Ltd.
EA License No. 19C9682
EA Reg. No. R22108850 (Chan Mun Mun)

Our client is from Oil and Gas industry. They are looking for a Senior Mechanical Engineer for the next phase of their business. They are located in West.

Duties:

• Responsible in guiding the maintenance, troubleshooting, repair, commissioning and substitute of mechanical or piping equipment within the Gas Engine Generators as well as its additional systems such as gas engine, pipeline, pressure pipe, ACMVs, lube oil and coolant pumps arrangement.
• Responsible in supporting mechanical support and solutions for the process & care and providing the development of care strategy including procedure/specification focusing on equipment dependability, spares inventory necessity, shutdown and inspection lists, preventive and prophetic care programmed.
• Responsible in managing and work meticulously with internal contractor and equipment seller to perform maintenance work at the Gas Engine Generators Building and terminal.
• Responsible to make certain compliance to appropriate regulations, manipulate safely, fit for object, maintainable and trustworthy for the site’s modified or anew build mechanical setup (such as gas engine, pumps, gravity vessel, safety facilities, etc).
• Responsible in guiding technical negotiations, execute and succeed project schedules or cost as well as collaboration with outward and internal shareholders, merchants for end of life and development project using company Management of Change process for machinery facilities.
• Responsible in supplying technical practicing as required in the area of process, maintenance, fault resolution of the Gas Engine Generators.
• Responsible in contacting with exterior investor including administration agencies on approbation and risk of closure of electrical arrangement that will influence gas-send out.

Requirements

• Min Bachelor’s Degree in Mechanical Engineering or any relevant field.
• Min 3 to 5 years’ experience in relevant industry for maintenance of rotary and staticequipment is needed
• Prior experience in different types of gas/diesel machine knowledges is a bonus.

Interested candidates who wish to apply for the advertised position, please click APPLY NOW or email an updated copy of your resume/cv.

We regret that only shortlisted candidate will be notified.

Email Address: [email protected]

Recruitpedia Pte. Ltd.

EA License No: 19C9682

EA Personnel No: R2198636 (Oh Puey Xin)

Our client is from Oil and Gas industry. They are looking for a Electrical & Control Maintenance Supervisor to assist their team for the next phase of their business. They are located in West.

Duties:

• Lead and supervise electrical technicians and contractors in system installation, maintenance, and repair.
• Develop and conduct on-the-job training programs for E&I team members.
• Perform site inspections and quality control for electrical work.
• Review and approve electrical isolation, excavation, and related permits.
• Investigate electrical maintenance issues, identify root causes, and implement solutions.
• Collaborate with other engineers to ensure equipment reliability through effective maintenance programs.

Requirements:

• Minimum Bachelors Degree in Electrical Engineering or any relevant field.
• Minimum 8 to 12 years experience in Oil and Gas Industry or any relevant industry.

Interested candidates who wish to apply for the advertised position, please click APPLY NOW or email an updated copy of your resume/cv. We regret that only shortlisted candidate will be notified.

Email address: [email protected]

Recruitpedia Pte. Ltd.

EA License No. 19C9682
EA Reg. No. R22108850 (Chan Mun Mun)

Job Description

• Industry/Organization Type: Waste Management Company
• Position Title: Operation Technician, Team Leader (Chemical Plant/Incinerator)
• Working Location: Tuas (Transportation Provided)
• Working Hours: Monday – Friday, 8 am – 5 pm; Saturday, 8 am – 12 pm/Shift Work: Day – 8 am – 8 pm, Night – 8 pm – 8 am
• Salary Package: Gross up to $4,500 (Basic + OT/Shift Allowance) + Company Transport/Transport Allowance + AWS + Quarterly Incentives + Performance Bonus + Joining Bonus
• Duration: Permanent

Key Responsibilities

• Oversee the daily operation and process control of the incinerator and boiler turbine plants.
• Develop strategies and implement plans to enhance operational efficiencies and reduce costs.
• Manage the daily requirements of consumables, tools, and equipment for the plant.
• Oversee budget planning and cost management for maintenance operations.
• Establish and enforce operational procedures according to ISO & OHSAS standards, including training and communication to staff.
• Conduct regular inspections and prepare plant equipment for audits and inspections to meet all regulatory and safety standards.
• Ensure adherence to environmental regulations concerning air pollutants.
• Develop and maintain detailed maintenance schedules, managing manpower for both routine and shutdown maintenance effectively.
• Coordinate with other departments to manage power distribution and communicate any potential interruptions.
• Supervise, motivate, and lead a team of technicians and operators, ensuring high performance and compliance with safety standards.
• Develop and conduct in-house training for staff on operations, maintenance, emergency responses, and safety procedures.
• Manage documentation, records, and operational data analysis and reporting.
• Monitor and ensure contractor compliance with safety standards during maintenance works.
• Regularly review and assess contractor performance.
• Support the engineering department in maintaining and upgrading plant facilities, including developing preventive maintenance plans.

APPLY NOW!!!

• Diploma in Mechanical Engineering, Chemistry, or relevant field.
• Minimum of 3 years of supervisory experience in maintenance operations, preferably in rotary kiln incinerator or boiler operations.
• Ability to work in a 12-hour rotating shift pattern.
• In-depth knowledge of industry-specific safety and environmental regulations.

Kindly apply through ANY of the following methods:

• Submit your application by clicking the APPLY button;
• Email your resume to Job(at)anradus.com.sg. Kindly indicate #69800 on the email subject.

Anradus Application Policy: We value each application and ensure every resume is reviewed. Our process is efficient, typically concluding within 3 working days. If you do not receive communication from us within this timeframe, it's likely that your application has not been shortlisted by our client. In such cases, we recommend continuing your job search to maximize your opportunities.

Anradus Pte Ltd | EA License No. 20C0161 | Norman Wee | EA Reg No.: R23115114

Our client is from Oil and Gas industry. They are looking for a Senior Mechanical Engineer for the next phase of their business. They are located in West.

Duties:

• Responsible in guiding the maintenance, troubleshooting, repair, commissioning and substitute of mechanical or piping equipment within the Gas Engine Generators as well as its additional systems such as gas engine, pipeline, pressure pipe, ACMVs, lube oil and coolant pumps arrangement.
• Responsible in supporting mechanical support and solutions for the process & care and providing the development of care strategy including procedure/specification focusing on equipment dependability, spares inventory necessity, shutdown and inspection lists, preventive and prophetic care programmed.
• Responsible in managing and work meticulously with internal contractor and equipment seller to perform maintenance work at the Gas Engine Generators Building and terminal.
• Responsible to make certain compliance to appropriate regulations, manipulate safely, fit for object, maintainable and trustworthy for the site’s modified or anew build mechanical setup (such as gas engine, pumps, gravity vessel, safety facilities, etc).
• Responsible in guiding technical negotiations, execute and succeed project schedules or cost as well as collaboration with outward and internal shareholders, merchants for end of life and development project using company Management of Change process for machinery facilities.
• Responsible in supplying technical practicing as required in the area of process, maintenance, fault resolution of the Gas Engine Generators.
• Responsible in contacting with exterior investor including administration agencies on approbation and risk of closure of electrical arrangement that will influence gas-send out.

Requirements

• Min Bachelor’s Degree in Mechanical Engineering or any relevant field.
• Min 3 to 5 years’ experience in relevant industry for maintenance of rotary and staticequipment is needed
• Prior experience in different types of gas/diesel machine knowledges is a bonus.

Interested candidates who wish to apply for the advertised position, please click APPLY NOW or email an updated copy of your resume/cv.

We regret that only shortlisted candidate will be notified.

Email Address: [email protected]

Recruitpedia Pte. Ltd.

EA License No: 19C9682

EA Personnel No: R2198636 (Oh Puey Xin)