Mon - Thurs: 8:30 a.m. - 6 p.m

Fri: 8:30 a.m. - 5:30 p.m

This role overseeing and handle company's facilities maintenance

and administrative duties

1. Handles proactive and preventative maintenance works to the building facilities/ system/ equipment (Example: telephone system, goods hoist lifts system, passenger lifts system, car lift, dumbwaiter, ACMV system, fire protection system, sanitary & plumbing system etc.). To ensure that all systems are in good functioning condition. If any repair or replacement are required, source for quotations and coordinate with the various stakeholders for the work to be carried out.

2. Make frequent trips to the various facilities within the Group to carry out routine inspection.

3. Contact and coordinate with both internal and external stakeholders / vendors on all the service maintenance, repair works and scheduling matters.

4. After completion by external vendor, conduct visual inspection to ensure that the works are carried out properly and satisfactorily.

5. Conduct bi-weekly night inspection to ensure the functionality of all the building signage and building security lighting.

6. Administrative duties such as preparation, verification & processing of Purchase Requisition/ Purchase Order and Invoices etc.

7. Updating of maintenance schedule and incurred expenditure reports.

8. Prepare annual building maintenance expenditure and budgetary reports.

9. Renewal of factory license, signage advertisement license, electrical installation license, subletting application, etc., and submission of new applications to relevant authorities whenever necessary.

10. To ensure that there is adequate stock for all toiletries and groceries supplies and place order if the stock is running low.

11. Prepare proposal to the management for any proposed improvement/ repair/ replacement work.

12. Assist in any ad hoc A&A/ upgrading/ improvement projects. Coordinate with the project consultants/ contractors and monitoring the project progress.

13. Review of drawings, building plans to ensure that the design specification complies to the owner’s requirement as well as to the statutory code of practice/regulation.

14. Quality control of work done by contractor to ensure that all works carried out are in accordance with the approved drawings, work scopes and technical specifications.

15. Any other suitable duties that may be assigned by the Management from time to time

Working Hours 5 days work week:

1st Shift-7.00AM to 3.00PM ,

2nd Shift -3PM to 11PM ,

3rd Shift-11PM to 7AM)

Job Summary

The role is responsible for ensuring the proper functioning, safety, and upkeep of equipment, machinery, and facilities. The primary objective of the Maintenance Technician is to minimize downtime, maintain operational efficiency, and contribute to a safe working environment.

Role and Responsibilities

1. Equipment Maintenance:

a) To perform routine inspections, preventive maintenance, and able to repair basic equipment including mechanical and electrical systems.

b) Diagnose basic to intermediate troubleshoot problems and implement appropriate solutions to restore equipment functionality.

c) Maintain accurate records of maintenance activities, repairs, and replacements.

d) Perform preventive maintenance work assigned.

2. Facility Upkeep:

a) Conduct regular inspections of the facility, safety hazards, and cleanliness concerns.

b) Coordinate and perform basic to intermediate repairs and adjustments to maintain a safe and well-maintained working environment.

c) Minimize downtime due to equipment breakdown.

3. Safety and Compliance:

a) Adhere to safety protocols and guidelines while performing maintenance tasks to ensure the safety of oneself and others.

b) Collaborate with relevant departments to address safety and compliance concerns promptly.

4. Equipment Installation and Calibration:

a) Assist in the installation and setup of new equipment, machinery, or systems.

b) Support basic to intermediate process modification and project.

5. Inventory Management:

a) Maintain an organized inventory of spare parts, tools, and supplies necessary for routine maintenance and repairs.

b) Works with Maintenance inventory and facility team to order and restock supplies as needed to minimize downtime.

6. Collaboration and Communication:

a) Collaborate with other maintenance team members and departments to address complex maintenance issues and projects.

b) Communicate effectively with supervisors, peers, and management regarding maintenance status, updates, and recommendations.

7. Training and Development:

a) To provide basic training to new and unskilled technician

Job Requirements:

• Minimum O level or equivalent; diploma/certificate or vocational training in maintenance or a related field is a plus

• Proven experience as a Maintenance Technician or similar role that strong in electrical

• Proficiency in using hand and power tools , experience in pump / gear box or motor repair will be at advantage

• Ability to diagnostic and problem-solving skills

• Strong attention to detail and organizational skills

• Excellent communication and teamwork abilities and proactive work attitude

• Knowledge of safety protocols and regulations

• Flexibility to work on-call or during off-hours, if necessary

• Proficient in Microsoft Excel, Words and PowerPoint, add advantage if familiar with CMMS

Assistant Engineer (Project Management )

Summary:

• Equipment set up for various systems, conduct testing & commissioning

• Follow up with clients in a timely manner

• Assist sales team with site survey & system design

• Provide support and manage project

• Perform troubleshooting & repair / replace faulty parts

• Provide onsite support to diagnose and rectify technical issue

• Ad hoc duties as required

Additional Information:

• Relevant educational qualifications in Diploma or Degree in Computer Science , Electrical / Electronic / Mechanical / Mechatronic or engineering field

• Proficient in Windows, Word, Power Point, Excel, and Access

• Able work independently and with other both indoor and outdoor locations

• Possess good communication and interpersonal skills

• Effective interpersonal skills for working in a team environment

• Able to work with deadlines and pressure

• Must have at least 1 year experience in handling cable wiring / electrical project

• Good working attitude and self-motivated

Mon to Fri 9am to 6pm

Working Hours 5 days work week:

1st Shift-7.00AM to 3.00PM ,

2nd Shift -3PM to 11PM ,

3rd Shift-11PM to 7AM)

Job Summary

The role is responsible for ensuring the proper functioning, safety, and upkeep of equipment, machinery, and facilities. The primary objective of the Maintenance Technician is to minimize downtime, maintain operational efficiency, and contribute to a safe working environment.

Role and Responsibilities

1. Equipment Maintenance:

a) To perform routine inspections, preventive maintenance, and able to repair basic equipment including mechanical and electrical systems.

b) Diagnose basic to intermediate troubleshoot problems and implement appropriate solutions to restore equipment functionality.

c) Maintain accurate records of maintenance activities, repairs, and replacements.

d) Perform preventive maintenance work assigned.

2. Facility Upkeep:

a) Conduct regular inspections of the facility, safety hazards, and cleanliness concerns.

b) Coordinate and perform basic to intermediate repairs and adjustments to maintain a safe and well-maintained working environment.

c) Minimize downtime due to equipment breakdown.

3. Safety and Compliance:

a) Adhere to safety protocols and guidelines while performing maintenance tasks to ensure the safety of oneself and others.

b) Collaborate with relevant departments to address safety and compliance concerns promptly.

4. Equipment Installation and Calibration:

a) Assist in the installation and setup of new equipment, machinery, or systems.

b) Support basic to intermediate process modification and project.

5. Inventory Management:

a) Maintain an organized inventory of spare parts, tools, and supplies necessary for routine maintenance and repairs.

b) Works with Maintenance inventory and facility team to order and restock supplies as needed to minimize downtime.

6. Collaboration and Communication:

a) Collaborate with other maintenance team members and departments to address complex maintenance issues and projects.

b) Communicate effectively with supervisors, peers, and management regarding maintenance status, updates, and recommendations.

7. Training and Development:

a) To provide basic training to new and unskilled technician

Job Requirements:

• Minimum O level or equivalent; diploma/certificate or vocational training in maintenance or a related field is a plus

• Proven experience as a Maintenance Technician or similar role that strong in electrical

• Proficiency in using hand and power tools , experience in pump / gear box or motor repair will be at advantage

• Ability to diagnostic and problem-solving skills

• Strong attention to detail and organizational skills

• Excellent communication and teamwork abilities and proactive work attitude

• Knowledge of safety protocols and regulations

• Flexibility to work on-call or during off-hours, if necessary

• Proficient in Microsoft Excel, Words and PowerPoint, add advantage if familiar with CMMS

Mon - Thurs: 8:30 a.m. - 6 p.m

Fri: 8:30 a.m. - 5:30 p.m

This role overseeing and handle company's facilities maintenance

and administrative duties

1. Handles proactive and preventative maintenance works to the building facilities/ system/ equipment (Example: telephone system, goods hoist lifts system, passenger lifts system, car lift, dumbwaiter, ACMV system, fire protection system, sanitary & plumbing system etc.). To ensure that all systems are in good functioning condition. If any repair or replacement are required, source for quotations and coordinate with the various stakeholders for the work to be carried out.

2. Make frequent trips to the various facilities within the Group to carry out routine inspection.

3. Contact and coordinate with both internal and external stakeholders / vendors on all the service maintenance, repair works and scheduling matters.

4. After completion by external vendor, conduct visual inspection to ensure that the works are carried out properly and satisfactorily.

5. Conduct bi-weekly night inspection to ensure the functionality of all the building signage and building security lighting.

6. Administrative duties such as preparation, verification & processing of Purchase Requisition/ Purchase Order and Invoices etc.

7. Updating of maintenance schedule and incurred expenditure reports.

8. Prepare annual building maintenance expenditure and budgetary reports.

9. Renewal of factory license, signage advertisement license, electrical installation license, subletting application, etc., and submission of new applications to relevant authorities whenever necessary.

10. To ensure that there is adequate stock for all toiletries and groceries supplies and place order if the stock is running low.

11. Prepare proposal to the management for any proposed improvement/ repair/ replacement work.

12. Assist in any ad hoc A&A/ upgrading/ improvement projects. Coordinate with the project consultants/ contractors and monitoring the project progress.

13. Review of drawings, building plans to ensure that the design specification complies to the owner’s requirement as well as to the statutory code of practice/regulation.

14. Quality control of work done by contractor to ensure that all works carried out are in accordance with the approved drawings, work scopes and technical specifications.

15. Any other suitable duties that may be assigned by the Management from time to time

Assistant Engineer (Project Management )

Summary:

• Equipment set up for various systems, conduct testing & commissioning

• Follow up with clients in a timely manner

• Assist sales team with site survey & system design

• Provide support and manage project

• Perform troubleshooting & repair / replace faulty parts

• Provide onsite support to diagnose and rectify technical issue

• Ad hoc duties as required

Additional Information:

• Relevant educational qualifications in Diploma or Degree in Computer Science , Electrical / Electronic / Mechanical / Mechatronic or engineering field

• Proficient in Windows, Word, Power Point, Excel, and Access

• Able work independently and with other both indoor and outdoor locations

• Possess good communication and interpersonal skills

• Effective interpersonal skills for working in a team environment

• Able to work with deadlines and pressure

• Must have at least 1 year experience in handling cable wiring / electrical project

• Good working attitude and self-motivated

Mon to Fri 9am to 6pm

How you will create an impact

• Establishing business relationship and act as a single point of contact for handling support escalations.
• IT vendor management and SLA monitoring.
• Work with the team on the Service Improvement Planning.
• Assisting in application rollout, performing validation post implementation.
• Disaster Recovery and Business Continuity planning (and associated testing) as well as the maintenance.
• Work with Infrastructure Services and other IT teams in handling the downstream, infra related items.
• Focus on the security of the applications, periodic Software Security Assessment refresh, Security Architecture Review refresh etc.
• Ensuring the security framework and controls are followed for the applications (Hammer).

What you’ll need to succeed

• Bachelors or Masters in Computer Science/IT.
• Proven experience in Application support – preferably in BFSI industry.
• Good knowledge or solid experience in Enterprise monitoring and observability domain; preferably in BFSI industry.
• Enterprise logging platforms - Splunk, Elasticsearch, etc.
• Familiarity with workflow management and ITSM tools such as Remedy or ServiceNow.
• Good understanding of Agile (Scrum or Kanban) and implementation of same in real world along with exposure to associated tool sets (JIRA/Confluence).
• Highly desirable - exposure to Cloud Technologies, SRE, and DevOps concepts with focus on automation.
• Self-directed and self-learner, displays resilience and discipline.
• Excellent analytical and communication skills.
• Good planning and organizing skills with structured thinking and innovative solutions.
• Strategic forward-thinking approach to challenges.
• Strong in influencing / negotiating and leveraging strong professional relationship to drive and deliver the right business outcomes.
• Ability to look at issues from multiple angles and appreciate diverse perspectives and complexity.

• Aircraft Maintenance Engineering License with at least 5 years signing off in Singapore, CAAS licensed preferred and experience in performing aircraft heavy/line maintenance.
• Perform maintenance on customer aircraft in complying with Company
• Perform inspection, make adjustment and repair, replace components, and correct any malfunction or deficiency with and without power applied to the aircraft.
• Access and re-install aircraft components, which obstruct the performance of the assigned tasks.
• Perform basic mechanical and electrical removals and installation.
• Document work performed per quality procedure manual.
• Perform other tasks cleaning aircraft using approved materials, methods, and equipment, and loads and secures ballast and/or freight as required.
• Assist with fueling/ defueling aircraft as required.
• Assist Aircraft Technicians in troubleshooting and repairing of aircraft.
• Assist with repairs on components detached from the aircraft, for example, flaps, ailerons, elevators, rudders, doors, and leading edges.
• Work on aircraft as well as in component shops.
• Assist with complex repairs at on-site and off-site locations.

Mon - Thurs: 8:30 a.m. - 6 p.m

Fri: 8:30 a.m. - 5:30 p.m

This role overseeing and handle company's facilities maintenance

and administrative duties

1. Handles proactive and preventative maintenance works to the building facilities/ system/ equipment (Example: telephone system, goods hoist lifts system, passenger lifts system, car lift, dumbwaiter, ACMV system, fire protection system, sanitary & plumbing system etc.). To ensure that all systems are in good functioning condition. If any repair or replacement are required, source for quotations and coordinate with the various stakeholders for the work to be carried out.

2. Make frequent trips to the various facilities within the Group to carry out routine inspection.

3. Contact and coordinate with both internal and external stakeholders / vendors on all the service maintenance, repair works and scheduling matters.

4. After completion by external vendor, conduct visual inspection to ensure that the works are carried out properly and satisfactorily.

5. Conduct bi-weekly night inspection to ensure the functionality of all the building signage and building security lighting.

6. Administrative duties such as preparation, verification & processing of Purchase Requisition/ Purchase Order and Invoices etc.

7. Updating of maintenance schedule and incurred expenditure reports.

8. Prepare annual building maintenance expenditure and budgetary reports.

9. Renewal of factory license, signage advertisement license, electrical installation license, subletting application, etc., and submission of new applications to relevant authorities whenever necessary.

10. To ensure that there is adequate stock for all toiletries and groceries supplies and place order if the stock is running low.

11. Prepare proposal to the management for any proposed improvement/ repair/ replacement work.

12. Assist in any ad hoc A&A/ upgrading/ improvement projects. Coordinate with the project consultants/ contractors and monitoring the project progress.

13. Review of drawings, building plans to ensure that the design specification complies to the owner’s requirement as well as to the statutory code of practice/regulation.

14. Quality control of work done by contractor to ensure that all works carried out are in accordance with the approved drawings, work scopes and technical specifications.

15. Any other suitable duties that may be assigned by the Management from time to time

Working Hours 5 days work week:

1st Shift-7.00AM to 3.00PM ,

2nd Shift -3PM to 11PM ,

3rd Shift-11PM to 7AM)

Job Summary

The role is responsible for ensuring the proper functioning, safety, and upkeep of equipment, machinery, and facilities. The primary objective of the Maintenance Technician is to minimize downtime, maintain operational efficiency, and contribute to a safe working environment.

Role and Responsibilities

1. Equipment Maintenance:

a) To perform routine inspections, preventive maintenance, and able to repair basic equipment including mechanical and electrical systems.

b) Diagnose basic to intermediate troubleshoot problems and implement appropriate solutions to restore equipment functionality.

c) Maintain accurate records of maintenance activities, repairs, and replacements.

d) Perform preventive maintenance work assigned.

2. Facility Upkeep:

a) Conduct regular inspections of the facility, safety hazards, and cleanliness concerns.

b) Coordinate and perform basic to intermediate repairs and adjustments to maintain a safe and well-maintained working environment.

c) Minimize downtime due to equipment breakdown.

3. Safety and Compliance:

a) Adhere to safety protocols and guidelines while performing maintenance tasks to ensure the safety of oneself and others.

b) Collaborate with relevant departments to address safety and compliance concerns promptly.

4. Equipment Installation and Calibration:

a) Assist in the installation and setup of new equipment, machinery, or systems.

b) Support basic to intermediate process modification and project.

5. Inventory Management:

a) Maintain an organized inventory of spare parts, tools, and supplies necessary for routine maintenance and repairs.

b) Works with Maintenance inventory and facility team to order and restock supplies as needed to minimize downtime.

6. Collaboration and Communication:

a) Collaborate with other maintenance team members and departments to address complex maintenance issues and projects.

b) Communicate effectively with supervisors, peers, and management regarding maintenance status, updates, and recommendations.

7. Training and Development:

a) To provide basic training to new and unskilled technician

Job Requirements:

• Minimum O level or equivalent; diploma/certificate or vocational training in maintenance or a related field is a plus

• Proven experience as a Maintenance Technician or similar role that strong in electrical

• Proficiency in using hand and power tools , experience in pump / gear box or motor repair will be at advantage

• Ability to diagnostic and problem-solving skills

• Strong attention to detail and organizational skills

• Excellent communication and teamwork abilities and proactive work attitude

• Knowledge of safety protocols and regulations

• Flexibility to work on-call or during off-hours, if necessary

• Proficient in Microsoft Excel, Words and PowerPoint, add advantage if familiar with CMMS

JOB RESPONSBILITY:

• Perform maintenance on customer aircraft in complying with Policies & Procedures and Aviation Authorities Rules and Regulations.
• Perform inspection, make adjustment and repair, replace components, and correct any malfunction or deficiency with and without power applied to the aircraft.
• Access and re-install aircraft components, which obstruct the performance of the assigned tasks.
• Perform basic mechanical and electrical removals and installation.
• Document work performed per quality procedure manual.
• Perform other tasks cleaning aircraft using approved materials, methods, and equipment, and loads and secures ballast and/or freight as required.
• Assist with fueling/ defueling aircraft as required.
• Assist Aircraft Technicians in troubleshooting and repairing of aircraft.
• Assist with repairs on components detached from the aircraft, for example, flaps, ailerons, elevators, rudders, doors, and leading edges.
• Work on aircraft as well as in component shops.
• Assist with complex repairs at on-site and off-site locations.
• Assist other employees in the performance of their duties within area(s) of qualification.
  
  WORK LOCATION: SINGAPORE
  
  PREFERED SKILL
• You have minimum Aircraft Maintenance Engineering License with at least 5 years signing off in Singapore, CAAS licensed preferred and experience in performing aircraft heavy/line maintenance.
• You have had experience working on aircrafts.
• You must Hold College/ Diploma and / or equivalent academic qualification.
• You have interpersonal skills necessary to establish and maintain effective working relationships with internal and external customers.
• You have planning and organizational skills necessary to coordinate workload around multiple assignments.

Assistant Engineer (Project Management )

Summary:

• Equipment set up for various systems, conduct testing & commissioning

• Follow up with clients in a timely manner

• Assist sales team with site survey & system design

• Provide support and manage project

• Perform troubleshooting & repair / replace faulty parts

• Provide onsite support to diagnose and rectify technical issue

• Ad hoc duties as required

Additional Information:

• Relevant educational qualifications in Diploma or Degree in Computer Science , Electrical / Electronic / Mechanical / Mechatronic or engineering field

• Proficient in Windows, Word, Power Point, Excel, and Access

• Able work independently and with other both indoor and outdoor locations

• Possess good communication and interpersonal skills

• Effective interpersonal skills for working in a team environment

• Able to work with deadlines and pressure

• Must have at least 1 year experience in handling cable wiring / electrical project

• Good working attitude and self-motivated

Mon to Fri 9am to 6pm

Mon - Thurs: 8:30 a.m. - 6 p.m

Fri: 8:30 a.m. - 5:30 p.m

This role overseeing and handle company's facilities maintenance

and administrative duties

1. Handles proactive and preventative maintenance works to the building facilities/ system/ equipment (Example: telephone system, goods hoist lifts system, passenger lifts system, car lift, dumbwaiter, ACMV system, fire protection system, sanitary & plumbing system etc.). To ensure that all systems are in good functioning condition. If any repair or replacement are required, source for quotations and coordinate with the various stakeholders for the work to be carried out.

2. Make frequent trips to the various facilities within the Group to carry out routine inspection.

3. Contact and coordinate with both internal and external stakeholders / vendors on all the service maintenance, repair works and scheduling matters.

4. After completion by external vendor, conduct visual inspection to ensure that the works are carried out properly and satisfactorily.

5. Conduct bi-weekly night inspection to ensure the functionality of all the building signage and building security lighting.

6. Administrative duties such as preparation, verification & processing of Purchase Requisition/ Purchase Order and Invoices etc.

7. Updating of maintenance schedule and incurred expenditure reports.

8. Prepare annual building maintenance expenditure and budgetary reports.

9. Renewal of factory license, signage advertisement license, electrical installation license, subletting application, etc., and submission of new applications to relevant authorities whenever necessary.

10. To ensure that there is adequate stock for all toiletries and groceries supplies and place order if the stock is running low.

11. Prepare proposal to the management for any proposed improvement/ repair/ replacement work.

12. Assist in any ad hoc A&A/ upgrading/ improvement projects. Coordinate with the project consultants/ contractors and monitoring the project progress.

13. Review of drawings, building plans to ensure that the design specification complies to the owner’s requirement as well as to the statutory code of practice/regulation.

14. Quality control of work done by contractor to ensure that all works carried out are in accordance with the approved drawings, work scopes and technical specifications.

15. Any other suitable duties that may be assigned by the Management from time to time

☑ With or Without experience – NO EXPERIENCE REQUIRED

☑ Must have Class 3/3C licence

☑ PERMANENT NIGHT SHIFT – 9 am to 6.45 am

☑ 1 month office hours training, 8.45 am – 6 pm

Key Responsibilities:

· Carry out basic diagnosis, repair, maintenance and fault findings for the Electric Vehicles (EVS)

· Ensure the cleanliness of the interior and exterior of the EVs (80%)

· Update onboard PC and changing of SIM card

· Balancing/ Shifting of EVs to the stations when required

· Handle service anomalies such as unplugged cars, cars parked outside of stations, lost & found, etc

· Report on the information system via PDA

· Communicate with customers about our service when required

Key Requirements:

• NITEC in Automotive/ Electrical Engineering

• Candidate with hands-on automotive experience will be an added advantage

Interested applicants, kindly send your UPDATED resume in MS WORD format to ref9 at trustrecruit.com.sg or please click on “Apply Now” and provide the below details in your resume.

We regret only shortlisted candidates will be notified.

Important Note: Trust Recruit Pte Ltd is committed to safeguarding your personal data in accordance with the Personal Data Protection Act (PDPA).

Please read our privacy statement on our corporate website www.trustrecruit.com.sg.

Trust Recruit Pte Ltd

EA License No: 19C9950

EA Personnel: Lim Xue Fen

EA Personnel Reg No: R1653801

Working Hours 5 days work week:

1st Shift-7.00AM to 3.00PM ,

2nd Shift -3PM to 11PM ,

3rd Shift-11PM to 7AM)

Job Summary

The role is responsible for ensuring the proper functioning, safety, and upkeep of equipment, machinery, and facilities. The primary objective of the Maintenance Technician is to minimize downtime, maintain operational efficiency, and contribute to a safe working environment.

Role and Responsibilities

1. Equipment Maintenance:

a) To perform routine inspections, preventive maintenance, and able to repair basic equipment including mechanical and electrical systems.

b) Diagnose basic to intermediate troubleshoot problems and implement appropriate solutions to restore equipment functionality.

c) Maintain accurate records of maintenance activities, repairs, and replacements.

d) Perform preventive maintenance work assigned.

2. Facility Upkeep:

a) Conduct regular inspections of the facility, safety hazards, and cleanliness concerns.

b) Coordinate and perform basic to intermediate repairs and adjustments to maintain a safe and well-maintained working environment.

c) Minimize downtime due to equipment breakdown.

3. Safety and Compliance:

a) Adhere to safety protocols and guidelines while performing maintenance tasks to ensure the safety of oneself and others.

b) Collaborate with relevant departments to address safety and compliance concerns promptly.

4. Equipment Installation and Calibration:

a) Assist in the installation and setup of new equipment, machinery, or systems.

b) Support basic to intermediate process modification and project.

5. Inventory Management:

a) Maintain an organized inventory of spare parts, tools, and supplies necessary for routine maintenance and repairs.

b) Works with Maintenance inventory and facility team to order and restock supplies as needed to minimize downtime.

6. Collaboration and Communication:

a) Collaborate with other maintenance team members and departments to address complex maintenance issues and projects.

b) Communicate effectively with supervisors, peers, and management regarding maintenance status, updates, and recommendations.

7. Training and Development:

a) To provide basic training to new and unskilled technician

Job Requirements:

• Minimum O level or equivalent; diploma/certificate or vocational training in maintenance or a related field is a plus

• Proven experience as a Maintenance Technician or similar role that strong in electrical

• Proficiency in using hand and power tools , experience in pump / gear box or motor repair will be at advantage

• Ability to diagnostic and problem-solving skills

• Strong attention to detail and organizational skills

• Excellent communication and teamwork abilities and proactive work attitude

• Knowledge of safety protocols and regulations

• Flexibility to work on-call or during off-hours, if necessary

• Proficient in Microsoft Excel, Words and PowerPoint, add advantage if familiar with CMMS

Assistant Engineer (Project Management )

Summary:

• Equipment set up for various systems, conduct testing & commissioning

• Follow up with clients in a timely manner

• Assist sales team with site survey & system design

• Provide support and manage project

• Perform troubleshooting & repair / replace faulty parts

• Provide onsite support to diagnose and rectify technical issue

• Ad hoc duties as required

Additional Information:

• Relevant educational qualifications in Diploma or Degree in Computer Science , Electrical / Electronic / Mechanical / Mechatronic or engineering field

• Proficient in Windows, Word, Power Point, Excel, and Access

• Able work independently and with other both indoor and outdoor locations

• Possess good communication and interpersonal skills

• Effective interpersonal skills for working in a team environment

• Able to work with deadlines and pressure

• Must have at least 1 year experience in handling cable wiring / electrical project

• Good working attitude and self-motivated

Mon to Fri 9am to 6pm

Mon - Thurs: 8:30 a.m. - 6 p.m

Fri: 8:30 a.m. - 5:30 p.m

This role overseeing and handle company's facilities maintenance

and administrative duties

1. Handles proactive and preventative maintenance works to the building facilities/ system/ equipment (Example: telephone system, goods hoist lifts system, passenger lifts system, car lift, dumbwaiter, ACMV system, fire protection system, sanitary & plumbing system etc.). To ensure that all systems are in good functioning condition. If any repair or replacement are required, source for quotations and coordinate with the various stakeholders for the work to be carried out.

2. Make frequent trips to the various facilities within the Group to carry out routine inspection.

3. Contact and coordinate with both internal and external stakeholders / vendors on all the service maintenance, repair works and scheduling matters.

4. After completion by external vendor, conduct visual inspection to ensure that the works are carried out properly and satisfactorily.

5. Conduct bi-weekly night inspection to ensure the functionality of all the building signage and building security lighting.

6. Administrative duties such as preparation, verification & processing of Purchase Requisition/ Purchase Order and Invoices etc.

7. Updating of maintenance schedule and incurred expenditure reports.

8. Prepare annual building maintenance expenditure and budgetary reports.

9. Renewal of factory license, signage advertisement license, electrical installation license, subletting application, etc., and submission of new applications to relevant authorities whenever necessary.

10. To ensure that there is adequate stock for all toiletries and groceries supplies and place order if the stock is running low.

11. Prepare proposal to the management for any proposed improvement/ repair/ replacement work.

12. Assist in any ad hoc A&A/ upgrading/ improvement projects. Coordinate with the project consultants/ contractors and monitoring the project progress.

13. Review of drawings, building plans to ensure that the design specification complies to the owner’s requirement as well as to the statutory code of practice/regulation.

14. Quality control of work done by contractor to ensure that all works carried out are in accordance with the approved drawings, work scopes and technical specifications.

15. Any other suitable duties that may be assigned by the Management from time to time

Working Hours 5 days work week:

1st Shift-7.00AM to 3.00PM ,

2nd Shift -3PM to 11PM ,

3rd Shift-11PM to 7AM)

Job Summary

The role is responsible for ensuring the proper functioning, safety, and upkeep of equipment, machinery, and facilities. The primary objective of the Maintenance Technician is to minimize downtime, maintain operational efficiency, and contribute to a safe working environment.

Role and Responsibilities

1. Equipment Maintenance:

a) To perform routine inspections, preventive maintenance, and able to repair basic equipment including mechanical and electrical systems.

b) Diagnose basic to intermediate troubleshoot problems and implement appropriate solutions to restore equipment functionality.

c) Maintain accurate records of maintenance activities, repairs, and replacements.

d) Perform preventive maintenance work assigned.

2. Facility Upkeep:

a) Conduct regular inspections of the facility, safety hazards, and cleanliness concerns.

b) Coordinate and perform basic to intermediate repairs and adjustments to maintain a safe and well-maintained working environment.

c) Minimize downtime due to equipment breakdown.

3. Safety and Compliance:

a) Adhere to safety protocols and guidelines while performing maintenance tasks to ensure the safety of oneself and others.

b) Collaborate with relevant departments to address safety and compliance concerns promptly.

4. Equipment Installation and Calibration:

a) Assist in the installation and setup of new equipment, machinery, or systems.

b) Support basic to intermediate process modification and project.

5. Inventory Management:

a) Maintain an organized inventory of spare parts, tools, and supplies necessary for routine maintenance and repairs.

b) Works with Maintenance inventory and facility team to order and restock supplies as needed to minimize downtime.

6. Collaboration and Communication:

a) Collaborate with other maintenance team members and departments to address complex maintenance issues and projects.

b) Communicate effectively with supervisors, peers, and management regarding maintenance status, updates, and recommendations.

7. Training and Development:

a) To provide basic training to new and unskilled technician

Job Requirements:

• Minimum O level or equivalent; diploma/certificate or vocational training in maintenance or a related field is a plus

• Proven experience as a Maintenance Technician or similar role that strong in electrical

• Proficiency in using hand and power tools , experience in pump / gear box or motor repair will be at advantage

• Ability to diagnostic and problem-solving skills

• Strong attention to detail and organizational skills

• Excellent communication and teamwork abilities and proactive work attitude

• Knowledge of safety protocols and regulations

• Flexibility to work on-call or during off-hours, if necessary

• Proficient in Microsoft Excel, Words and PowerPoint, add advantage if familiar with CMMS

Assistant Engineer (Project Management )

Summary:

• Equipment set up for various systems, conduct testing & commissioning

• Follow up with clients in a timely manner

• Assist sales team with site survey & system design

• Provide support and manage project

• Perform troubleshooting & repair / replace faulty parts

• Provide onsite support to diagnose and rectify technical issue

• Ad hoc duties as required

Additional Information:

• Relevant educational qualifications in Diploma or Degree in Computer Science , Electrical / Electronic / Mechanical / Mechatronic or engineering field

• Proficient in Windows, Word, Power Point, Excel, and Access

• Able work independently and with other both indoor and outdoor locations

• Possess good communication and interpersonal skills

• Effective interpersonal skills for working in a team environment

• Able to work with deadlines and pressure

• Must have at least 1 year experience in handling cable wiring / electrical project

• Good working attitude and self-motivated

Mon to Fri 9am to 6pm

Job Descriptions:

• Responsible for the operation and maintenance of mobile equipment in idc
• Responsible for the operation and maintenance of the Linux server/switch/AP in idc
• Responsible for the operation and maintenance management specifications of idc

Job Requirements

• Understand common Linux maintenance commands, Android device flashing, etc. ADB instructions
• Basic understanding on Network Protocols, and server operation in Linux OS
• Excellent communication skills

• Location : Tuas West
• Experience in Chiller
• AWS & VB provided

Key Responsibilities:

• Schedule and track chiller maintenance activities.
• Ensure adherence to maintenance checklists and schedules.
• Test, commission, and fine-tune new chillers independently.
• Oversee on-site project execution, including FAT and SAT, for optimal chiller performance.
• Interpret technical documents, as-built drawings, and schematics.
• Analyze operating data and address repair issues as needed.
• Manage chiller overhauls and supervise subcontractors for quality assurance.
• Prepare detailed service reports for each assignment.
• Address customer service issues promptly and recommend preventive measures.
• Conduct risk assessments and ensure safety during service and repairs.
• Perform additional tasks as required by the Department Manager.

Requirements

• Minimum ITE Certificate with Merit in Engineering or Diploma in Mechanical Engineering.
• At least 3 years of relevant experience with chiller systems.
• Proficient in guiding and troubleshooting HVAC faults, particularly with modular screw chillers, centrifugal chillers, and absorption chillers
• Willingness to undertake short-term overseas assignments

HOW TO APPLY:

Interested applicants, please click on “Apply Now” or email to submit your resume.
We regret only shortlisted candidates will be notified.

Stafflink Services Pte Ltd

EA Licence No.: 04C4294

EA Personnel: Tiang Wan Ying

EA Personnel Reg. No.: R1767473

Roles and Responsibilities:

• Lead and develop repair processes for Component Repairs for Rolls-Royce Trent Engine Components.
  Lead and assist in development of required tooling for respective repairs and inspection requirement, creation of manufacturing routers and process instructions (data cards, recording forms, Setup plans, etc.)
• Lead in demonstration of First article for assigned repair schemes per AS9102, AS 130000 and Rolls-Royce's SARRe Guideline for suppliers.
• Work closely with the Manufacturing Engineers and Specialist from Customer team to achieve assigned monthly targets of repair development of Repairs.
• Assist Manufacturing Engineers in resolution of technical and operational challenges or concerns raised to Rolls-Royce and ensure follow through till approval is obtained and repair is handed over to shop operations.
• Assisting all steps involved in Source Approval validation packages for Rolls-Royce Source Control Repair schemes and other documentation required for industrialization and approval.
• Assisting effectively interfaces with Engineering, Operations, Quality, Suppliers and other support teams during repair industrialization into the Shop and ensure that it meets Safety, Quality, Delivery and Productivity objectives within schedule and budget.
• Interface with vendors and internal functions in an effective manner to ensure that the action items to be carried out for the repair development are executed on time and in budget.
• Assure that all engineering designs and technical data are completed and accurately documented to provide an accurate technical/historical base for future reference and to meet customer/end user requirements.

Job Requirement

Bachelor’s degree in Mechanical/Aeronautical/Material or other relevant Engineering discipline with Min. 5 years of repair development or repair design experiences.

Technical Expertise

• Well versed in Rolls-Royce Repair Schemes designs, application of engine manuals and Cleaning and inspection chapter, Special Process Manuals and Overhaul process.
• Demonstrated knowledge and experience in Rolls-Royce Component Repair processes.
• Good understanding of manufacturing and inspection tools and processes used in the repair industry, such as heat treat, thermal spray, glass bead & shot peening, arc welding, Wide Gap brazing, machining, etc.
• Knowledge of GD&T, tool/fixture design and applications in repair.
• Good to have expertise in Nozzle Guide Vanes and Stator Vanes repair.

The performance of the onsite engineer will be evaluated based on:

• Timeliness and quality of repair schemes developed
• Feedback from team members and stakeholders
• Compliance with regulatory and internal quality standards

Roles and Responsibilities:

• Lead and develop repair processes for Component Repairs for Rolls-Royce Trent Engine Components.
  Lead and assist in development of required tooling for respective repairs and inspection requirement, creation of manufacturing routers and process instructions (data cards, recording forms, Setup plans, etc.)
• Lead in demonstration of First article for assigned repair schemes per AS9102, AS 130000 and Rolls-Royce's SARRe Guideline for suppliers.
• Work closely with the Manufacturing Engineers and Specialist from Customer team to achieve assigned monthly targets of repair development of Repairs.
• Assist Manufacturing Engineers in resolution of technical and operational challenges or concerns raised to Rolls-Royce and ensure follow through till approval is obtained and repair is handed over to shop operations.
• Assisting all steps involved in Source Approval validation packages for Rolls-Royce Source control Repair schemes and other documentation required for industrialization and approval.
• Assisting effectively interfaces with Engineering, Operations, Quality, Suppliers and other support teams during repair industrialization into the Shop and ensure that it meets Safety, Quality, Delivery and Productivity objectives, within schedule and budget.
• Interface with vendors and internal functions in an effective manner to ensure that the action items to be carried out for the repair development are executed on time and in budget.
• Assure that all engineering designs and technical data are completed and accurately documented to provide an accurate technical/historical base for future reference and to meet customer/end user requirements.

Job Requirement

Bachelor’s degree in Mechanical/Aeronautical/Material or other relevant Engineering discipline with Min. 5 years of Repair development or repair design experiences.

Technical Expertise:

• Well versed in Rolls-Royce Repair Schemes designs, application of engine manuals and Cleaning and inspection chapter, Special Process Manuals and Overhaul process.
• Demonstrated knowledge and experience in Rolls-Royce Component Repair processes
• Good understanding of manufacturing and inspection tools and processes used in the repair industry, such as heat treat, thermal spray, glass bead & shot peening, arc welding, Wide Gap brazing, machining, etc.
• Knowledge of GD&T, tool/fixture design and applications in repair.
• Good to have expertise in Nozzle Guide Vanes and Stator Vanes repair.

The performance of the onsite engineer will be evaluated based on:

• Timeliness and quality of repair schemes developed.
• Feedback from team members and stakeholders.
• Compliance with regulatory and internal quality standards.

Working Hours 5 days work week:

1st Shift-7.00AM to 3.00PM ,

2nd Shift -3PM to 11PM ,

3rd Shift-11PM to 7AM)

Job Summary

The role is responsible for ensuring the proper functioning, safety, and upkeep of equipment, machinery, and facilities. The primary objective of the Maintenance Technician is to minimize downtime, maintain operational efficiency, and contribute to a safe working environment.

Role and Responsibilities

1. Equipment Maintenance:

a) To perform routine inspections, preventive maintenance, and able to repair basic equipment including mechanical and electrical systems.

b) Diagnose basic to intermediate troubleshoot problems and implement appropriate solutions to restore equipment functionality.

c) Maintain accurate records of maintenance activities, repairs, and replacements.

d) Perform preventive maintenance work assigned.

2. Facility Upkeep:

a) Conduct regular inspections of the facility, safety hazards, and cleanliness concerns.

b) Coordinate and perform basic to intermediate repairs and adjustments to maintain a safe and well-maintained working environment.

c) Minimize downtime due to equipment breakdown.

3. Safety and Compliance:

a) Adhere to safety protocols and guidelines while performing maintenance tasks to ensure the safety of oneself and others.

b) Collaborate with relevant departments to address safety and compliance concerns promptly.

4. Equipment Installation and Calibration:

a) Assist in the installation and setup of new equipment, machinery, or systems.

b) Support basic to intermediate process modification and project.

5. Inventory Management:

a) Maintain an organized inventory of spare parts, tools, and supplies necessary for routine maintenance and repairs.

b) Works with Maintenance inventory and facility team to order and restock supplies as needed to minimize downtime.

6. Collaboration and Communication:

a) Collaborate with other maintenance team members and departments to address complex maintenance issues and projects.

b) Communicate effectively with supervisors, peers, and management regarding maintenance status, updates, and recommendations.

7. Training and Development:

a) To provide basic training to new and unskilled technician

Job Requirements:

• Minimum O level or equivalent; diploma/certificate or vocational training in maintenance or a related field is a plus

• Proven experience as a Maintenance Technician or similar role that strong in electrical

• Proficiency in using hand and power tools , experience in pump / gear box or motor repair will be at advantage

• Ability to diagnostic and problem-solving skills

• Strong attention to detail and organizational skills

• Excellent communication and teamwork abilities and proactive work attitude

• Knowledge of safety protocols and regulations

• Flexibility to work on-call or during off-hours, if necessary

• Proficient in Microsoft Excel, Words and PowerPoint, add advantage if familiar with CMMS

Mon - Thurs: 8:30 a.m. - 6 p.m

Fri: 8:30 a.m. - 5:30 p.m

This role overseeing and handle company's facilities maintenance

and administrative duties

1. Handles proactive and preventative maintenance works to the building facilities/ system/ equipment (Example: telephone system, goods hoist lifts system, passenger lifts system, car lift, dumbwaiter, ACMV system, fire protection system, sanitary & plumbing system etc.). To ensure that all systems are in good functioning condition. If any repair or replacement are required, source for quotations and coordinate with the various stakeholders for the work to be carried out.

2. Make frequent trips to the various facilities within the Group to carry out routine inspection.

3. Contact and coordinate with both internal and external stakeholders / vendors on all the service maintenance, repair works and scheduling matters.

4. After completion by external vendor, conduct visual inspection to ensure that the works are carried out properly and satisfactorily.

5. Conduct bi-weekly night inspection to ensure the functionality of all the building signage and building security lighting.

6. Administrative duties such as preparation, verification & processing of Purchase Requisition/ Purchase Order and Invoices etc.

7. Updating of maintenance schedule and incurred expenditure reports.

8. Prepare annual building maintenance expenditure and budgetary reports.

9. Renewal of factory license, signage advertisement license, electrical installation license, subletting application, etc., and submission of new applications to relevant authorities whenever necessary.

10. To ensure that there is adequate stock for all toiletries and groceries supplies and place order if the stock is running low.

11. Prepare proposal to the management for any proposed improvement/ repair/ replacement work.

12. Assist in any ad hoc A&A/ upgrading/ improvement projects. Coordinate with the project consultants/ contractors and monitoring the project progress.

13. Review of drawings, building plans to ensure that the design specification complies to the owner’s requirement as well as to the statutory code of practice/regulation.

14. Quality control of work done by contractor to ensure that all works carried out are in accordance with the approved drawings, work scopes and technical specifications.

15. Any other suitable duties that may be assigned by the Management from time to time