Responsibilities and Tasks

• Provide engineering study is to include good design practice for state-of-the-art system designs, system capacity and capability analysis, planning for future requirements, as well as code compliance.
• Maintain engineering data bases in support of capacity tracking, capital equipment facilitation, and cash flow project management for assigned systems/areas.
• Provide support for start-up of new equipment and ensure that all equipment will properly interface to other mechanical and electrical systems.
• Specify critical components for design projects and is responsible for assuring designs meet all applicable codes and regulations. The applicable code review and analysis utilizing (but not limited to): IFC, IBC, NEC, NFPA, FM, CGA and Semi standards. This requires continual review and analysis of new and existing equipment, applications, and technology.
• Perform engineering study on emerging facilities technologies to support cutting edge semiconductor processes.
• Participate in mid to long term infrastructure planning for facilities in support of the overall company plan.
• Work with in-house TGCM contractor and ensure chemical and Gas Delivery system running smoothly.
• Review and improve Operation and Maintenance SOP and RA.
• Respond to system issues. Perform Trouble Shooting with in-house TGCM contactors and OEMs.
• Verify all works done by Chemical and Gas section are in accordance with company safety guidelines; ensure safety features are engineered into designs; and maintain good communication with other engineering disciplines and customers throughout the organization.
• All team members are required to complete their learning items within the stipulated time frame.

For business process and/or QMS component that one is responsible or accountable for:
a. ensuring the QMS/business process that is effective and conforms to requirements.
b. ensuring that the processes are delivering their intended outputs.
c. reporting on QMS/business process performance and opportunities for improvement to management.
d. ensuring the promotion of internal and external customer focus throughout the organization.
e. ensuring the maintenance of the integrity of the QMS/ business process when changes are planned and implemented.
f. ensuring customer requirements are met.

• Plans facilities changes for plant, office, and production equipment layouts, working toward economy of operation, maximum use of facilities and equipment, and compliance with laws and regulations.

• Coordinates with architecture/engineering firms in developing design criteria and preparing layout and detail drawings.

• Prepares bid sheets and contracts for construction and facilities acquisition.
Reviews and estimates design costs including equipment, installation, labor, materials, preparation and other related costs.

• Inspects construction and installation progress for conformance to established drawings, specifications, and schedules.

• Develops criteria and performance specifications required to meet unique operating requirements and building and safety codes.

Education

• Bachelor’s degree in Chemical Engineering or equivalent discipline.

Skills, Knowledge and Abilities

​​ 3 to 5 years experience in relevant fields of Chemical and Gas system

• Good team work and collaboration

• Excellent communication and presentation skills

• Strong problem solving and analytical skills

• Independent and able to work on own initiative

• Good organizational skills and ability to prioritize and schedule workload

• Good knowledge of Microsoft Office applications

Plans facilities changes for plant, office, and production equipment layouts, working toward economy of operation, maximum use of facilities and equipment, and compliance with laws and regulations. Coordinates with architecture/engineering firms in developing design criteria and preparing layout and detail drawings. Prepares bid sheets and contracts for construction and facilities acquisition. Reviews and estimates design costs including equipment, installation, labor, materials, preparation and other related costs. Inspects construction and installation progress for conformance to established drawings, specifications, and schedules. Develops criteria and performance specifications required to meet unique operating requirements and building and safety codes.

We are looking for Veterinary Technicians to join us in our clinic that specialises in cats.

Relevant certification is required.

No certification, but relevant veterinary assistant experience may also apply.

There will be 3 months probation. Full time / Locum positions available.

Position is open to Singaporeans, PR and Malaysians.

Job Highlights:

• Yearly Renewable Contract (Opportunity for Conversion)
• Up to $4,500/month + completion bonus
• Comfortable to support work on night shift/weekend (if required only)

Job Responsibilities:

• Supervise a team of sub-contractors to execute cable support system installation, equipment testing, etc.
• Supervise on-site installation works to comply with authorities & customers requirements.
• Conduct site inspections and manage handover inspection with the clients.
• Prepare cable route drawing for installation and implementations for various systems.
• Oversee project status and work process to ensure timely completion within the project schedule.
• Ensure adherence to budget cost, quality standards, and MOM safety regulations.
• Prepare daily and weekly report and participate in weekly project progress meetings.

Job Requirements:

• Diploma in Electrical / Mechanical / Electronics Engineering or similar discipline.
• Familiar with AutoCAD or BIM
• Strong communication skills and ability to work effectively with contractors

If you are keen to explore this career opportunity, kindly send a copy of your resume to [email protected] or simply click the button to APPLY NOW! We regret that only shortlisted applicants will be notified.

Chan Ku Ci - R22111446

EA License No: 16C8261

Job Description

• Pick and Packing the medications
• Arranging for deliveries for medications
• Working closely with operations team to ensure that medications are delivered smoothly and on time
• Ensuring that medications packed are correct

Requirement

• Have work experience relating to Pharma will be advantages ( Eg : Clinic Assistant , Nurse , Pharmarcy Assistant , Patient Service Associate )

All qualified applicants, please click “ APPLY NOW”

Kimmy Low Yi Ting (Kim) | CEI Registration Number: R23112122

Recruit Express Pte Ltd Company Reg. No. 199601303W | EA LICENCE Number: 99C4599

Key Responsibilities:

• Install, service, and repair mechanical systems and machinery to ensure all equipment is in good working condition within the manufacturing plant.
• Perform routine and preventive maintenance to minimize equipment downtime and extend machinery lifespan.
• Troubleshoot mechanical malfunctions and diagnose root causes
• Respond to emergency breakdowns and work on time-sensitive repairs.
• Conduct inspections to ensure all mechanical systems and equipment meet operational and safety standards.
• Assemble and disassemble machinery for repairs or upgrades, adhering to manufacturer specifications.
• Work with engineers to modify and optimize mechanical systems for improved performance and efficiency.
• Document maintenance activities and prepare detailed reports on repairs and inspections.
• Read and interpret mechanical, pneumatic, hydraulic drawings, and technical manuals.
• Participate in continuous improvement initiatives to enhance equipment performance and reliability.
• Manage and maintain spare parts inventory, including monitoring stock levels, tracking usage, and requesting replacements when necessary.
• Data Collection readings and monitoring
• Maintain proper Housekeeping and Safety awareness on all job tasked by Equipment Engineer.
• Awareness of ISO 9001, ISO 14001 and ISO 45001 management systems and policy, including the implications of nonconforming to the requirements and the assessment of occupational risks and hazards.
• Schedule regular communication with employees to discuss expectations and challenges and help to remove obstacles related to product safety and quality.
• Act on comments and suggestions from employees about product safety and quality seriously, and regularly encourage employees to offer ideas about improving product safety and quality.
• Allocate time for employees to receive product safety and quality training, as well as regular updates and refresher sessions.

Job Requirements:

• At least 3 years of working experience in engineering / manufacturing
• At least 1 years of working experience in engineering / manufacturing
• Communication and Interpersonal skills
• Problem-solving and Analytical skills
• Time-management and Multi-tasking skills
• Maintain a high level of work performance under work pressures, challenges, changes and ambiguities
• Demonstrate flexibility in response to different environments and changes in roles and situations while maintaining effectiveness
• Understand and anticipate the expectations and requirements of both internal and external customers
• Deliver excellent customer service, and strive for improvement to achieve service excellence
• Display good moral ethics, i.e. honesty, trustworthiness and reliability
• Accept responsibility, respect confidentiality, and maintain professional protocol
• Is respectful and consistent in words and actions
• Work effectively within a team to achieve business goals and objectives
• Keep track and monitor work progress through established procedures and timelines to ensure that the work is completed efficiently and effectively

• Metal Stamping Company
• Basic $2500- 4000
• AWS + Variable Bonus
• Mon- Fri 0830 -1730
• Location: Pioneer

Job Responsibilities

• Develop and maintain schedules based on orders, forecasts, and inventory, while coordinating with sales, marketing, and production teams.
• Conduct MRP analysis, coordinate with procurement and suppliers, and monitor inventory to ensure timely availability and optimal turnover.
• Ensure on-time deliveries by addressing bottlenecks, balancing workloads, and communicating schedules with stakeholders.
• Identify inefficiencies, implement changes to enhance productivity, and monitor KPIs for continuous improvement.
• Address potential schedule risks, develop contingency plans, and handle any ad-hoc tasks assigned by management.

Requirement :

• Preferably min 1 years experiences in related industries

For consideration, kindly submit your CV by clicking “APPLY NOW”

*Only shortlisted candidates would be notified**

MTC Consulting Pte Ltd | 15C7752

EA. Registration No.: R23116143| Lucky Lee Ding Cong

Job Description:

• Prepare BQ and costing for project Tender Submission.
• Understanding of Tenders with respect to scope of work, pricing schedule and non-material requirements.
• Understanding and knowledge in Design & Build Tender is preferred.
• Other ad-hoc duties assigned by manager.

Job Requirements:

• NTC / Diploma Holder in Electrical and/or Mechanical Works or equivalent.
• Minimum 2 to 3 years of Project Tendering experience.
• Able to work independently.
• Knowledge in MS Office Applications (Word, Excel & PowerPoint).

Job Description:

- Responsible for the supervision of Electrical Equipment testing and commissioning at site, review and

submission of site acceptance test reports.

- Review Single Line Diagrams and Electrical Schematic Drawings.

- Assist in Electrical Equipment Installation Inspections.

- Attend to Site Activities and Meetings involving clients and contractors.

- To undertake tasks / assignments as and when directed by the Project Lead.

Job Requirements:

- Candidate must possess at least Diploma in Electrical Engineering.

- At least 2 Years of local working experience in the related field is required for this position.

- Possess initiative and capable of multi-tasking in a fast paced environment.

- Experience in MV / LV Electrical Equipment (Site Installation, Testing and Commmissioning,

Maintenance Testing) will be an added advantage.

Job Summary

Regularly performs the full range and scope of maintenance and housekeeping services that include, but not limited to: the upkeep of buildings, grounds, fixtures, equipment, NEXCOM Hospitality Group (NHG) guest rooms, public spaces, etc. Assignments include simple painting, plumbing, carpentry,

electrical repairs, maintenance using various equipment, etc. Takes initiative to ensure all aspects of the facility are working correctly.

Duties & Responsibilities

• Performs work in at least two of the following trades in the maintenance and repair of buildings and related fixtures. Maintains work order log and follows up as required. Reports status to supervisor. Logs trouble calls with contractor, as appropriate.
• Plumbing: Makes basic plumbing repairs to sinks, faucets, commodes, tanks, urinals, P-traps, shut-off valves on washing machines and water supply which can be accomplished by removing, cleaning, resealing, replacing defective parts or units, installing water heaters, garbage disposals, faucets and sinks.
• Washer/Dryer repair: Performs routine maintenance on washers and dryers to include cleaning lint ducts and vents, replacing hoses and fittings as required, and referring more complex problems to supervisor for action.
• Heating, Ventilation and Air Conditioning (HVAC): Recognizes the cause of faulty equipment and assists making repairs on a variety of HVAC units as appropriate.
• Electrical: Recognizes and reports electrical problems making repairs as appropriate. Replaces fluorescent and incandescent ballasts, bulbs and tubes.
• Carpentry: Measures, cuts and constructs or repairs wood or wood substitute items. Conducts basic carpentry repairs such as repairing or replacing screens; window and door frames; molding and trim; and repair and replacement of drywall or similar products.
• Painting: Preparation of areas and standard coating methods such as brushing, rolling and spraying and ensure surfaces are fully coated, protected and free from drips and runs.
• Responsible for a variety of semi-skilled and unskilled tasks involving standard methods related to the operation and maintenance of facilities.
• Work assignments (completed and in-progress) are spot-checked on a daily basis via documented inspection reports to assure that work practices, techniques, records, and other functions are technically accurate and in compliance with instructions. Recurring assignments (e.g. follow-up on maintenance requests reported by guests, housekeeping, or front desk) are carried out independently without specific instructions.
• Knowledge of safety and environmental rules and regulations concerning procedures, tools, mechanical and electrified equipment, commonly used chemicals and basic safe work practices is required.
• Complete all required safety/security training.
• Required to do considerable standing, bending, walking, pushing, pulling, and climbing. Must have ability to perform moderately strenuous physical labor as unassisted lifting, moving, and carrying of supplies and equipment weighing up to 45 pounds (100 pounds assisted) is required. Must be able to climb/descend stairs and ladders, stoop, bend, kneel and work in uncomfortable positions.
• Work involves normal risks or discomforts associated with property operations, facility management, and/or mechanical systems. Work is performed both indoors and outdoors with potential exposure to extreme weather or temperature conditions. Occasional exposure to dusty or dirty conditions exists when visiting rooms or facilities undergoing repair, maintenance, or renovation. Personal Protective Equipment (PPE) is provided.
• Incumbent is expected to perform daily work on own initiative and carry out assignments in accordance with DOD and Navy regulations. Situations involving unfamiliar problems not covered by instructions are referred to the supervisor for resolution.
• Typically employee uses routine instructions and work methods that are common to the trade and may be general in nature. Where available the incumbent will rely on blueprints, manufacturer's instructions, manuals, and maintenance specifications.
• May be required to possess a valid state driver license, as travel to other facilities may be required within the normal scope of duties. Applicants will be notified when this is a requirement for appointment.
• This position is subject to the possibility of workdays on weekends and holidays, as well as, rotating shifts, often consisting of other than normal duty hours. May be recalled to duty and/or required to work overtime, including on an emergency basis.
• Performs other related duties as assigned

Education & Qualifications

• Technical certification
• Minimum two years of experience with demonstrated skill in two areas (Carpentry, Plumbing, HVAC, Electrical, Painting).
• Knowledge in the applicable combination of trades sufficient to perform the duties of the position.
• Basic knowledge of trade practices sufficient to complete tasks using common skills.
• Familiarity with safe use of common hand and powered tools.
• Possession of, or ability to obtain a valid driver's license is preferred but not mandatory.

Required Documents

• A copy of highest education certificate.
• A copy of full transcripts of corresponding education used to support this application.

Conditions of Employment

• Satisfactorily complete and maintain clearance of a Local Agency Check (LAC).

Benefits

• Eligibility to accrue leave, be placed in a comprehensive employee group insurance program and enjoy a one-month annual wage supplement.

How To Apply

• Applicants must apply via MyCareersFuture for consideration.

Job Description

• Prepare and review Instrumentation, Control and Automation (ICA) Works specifications.
• Assist the ICA Lead and manage the engineering design works for the Control System Architecture, Data Communication Networks, Functional Design Specification (FDS), Process Control Narrative (PCN) and Process Instrumentation Diagrams (P&IDs), Programmable Logic Controller / Distributed Control System (PLC/DCS) and Supervisory Control and Data Acquisition (SCADA) and any other ICA Works as required.
• Handle equipment package and procurement including technical specifications preparation, technical clarification, technical bid analysis, etc.
• Collaboration with multiple stakeholders including internal teams of different trades, clients, consultants, other packages contractors, sub-contractors and vendors to ensure success of the project.
• Prepare, review and liaison with subcontractor(s) in the design and submission, ensuring all project specifications and design standards are met.
• Work with cross function project team to support project activities, i.e. schedule, process, progress claims, work progress, etc.
• Manage and supervise the project execution, site installation, inspection, testing and commissioning, plant proving related to Instrumentation, Control and automation system and interface works with other disciplines and all stakeholders.
• Attend to clients’ comments and ensure clients’ approval & acceptance to all ICA related design, installation and Testing & Commissioning Works.
• Resolve the site technical related matters.

Design, Engineering, FAT, Installation, Testing and Commissioning of:-

• System Control PLC/DCS and SCADA.
• Input / Output list
• Data Communication Network and ICA Panels.
• Instruments.
• FAT and SAT of Interfacing Panels, Instruments, Pumps, etc.
• Cable Support System.
• Cabling & Termination Works.

Requirements

• Degree in Electrical & Electronic Engineering / Instrumentation & Control Engineering / Advanced Diploma in Process Control and Instrumentation.
• Experience in Selection, Installation, Testing and Commissioning of the Instrumentation.
• Experience in ICA engineering Works, preferably in water/wastewater projectswill be an added advantage.
• Experience in Programming of PLC/DCS and SCADA.
• Experience in Project Execution, Supervising and Coordination with subcontractors, consultant and Client.
• Good knowledge in Microstation/Autocad software.
• Good technical understanding and experience in water, wastewater and environmental engineering works.
• Meticulous and analytical with excellent problem-solving skills.
• Able to work under tight deadlines.
• Highly motivated and ability to work independently with minimal supervision.
• Minimum 5 years relevant experience in engineering, installation, testing and commissioning of ICA Works.
• Able to work in the Tuas South area, in Singapore.

Job Description

• Put up technical statements and requirements for all aspects of Instrumentation, Control, and Automation (ICA) Works, including network development and associated field engineering works.
• Execute procurement functions, including strategic sourcing and supply contracting works.
• Communicate and work very closely with the Procurement Manager and ICA Head for preparation of the invitation of the request for Proposal and administering of the purchase requisition and award consent.
• Maintain and update all procurement documentation and records.
• Support the Instrumentation, Control and Automation Head of Department in budget monitoring.

Job Requirements:

• Diploma or Degree in Electrical, Chemical, or Environmental Engineering.
• Minimum of 3 years of working experience. Applicants with more than 8 years of working experience will be considered as Senior Procurement Executive.
• Experience in Environmental Engineering, particularly in water, wastewater treatment, and Waste-to-Energy (WTE) industries, with a focus on SCADA and DCS is preferred.
• Good oral and written command in English.
• Proficiency in Microsoft Office Suite, including Word, Excel, and PowerPoint.
• Experience with auditing procedures and compliance standards.
• Commercially orientated with good negotiation skill.

Primary Duties

• Perform preventive and corrective maintenance works according to quality standards and procedures.
• Conduct technical investigations in response to fault calls.
• Provide summary reports on preventive and corrective maintenance works.
• Comply with regulatory and organisational Workplace Safety and Health (WSH) policies and practices.
• Report accidents, near misses and incidents in accordance with WSH reporting practices.
• Ensure compliance with Quality and Environmental Management System (QEMS) standards and practices, Environmental Sustainability regulations and organisational requirements.
• Engage in continuous improvement initiatives to improve time, cost and quality management.
• Support the use of the latest smart facilities management trends or technologies.

Knowledge, Skills and Abilities

• Min 2-3 years of related experience
• General competency in the use of computers; and
• Capable in English writing and reporting

Education/Experience

• Higher Nitec or Nitec in Mechanical Engineering, Electrical Engineering, Facilities Management or equivalent;

To apply, please click on below link: -

https://sg.quickhr.co/view_job.php?jd=MTJxdWlja19ocl9yZWNydWl0bWVudA==&cd=MjA5MHF1aWNrX2hyX3JlY3J1aXRtZW50

*Due to the volume of applications, only shortlisted candidates will be notified. Thank you for your understanding and application.

• Provide professional nail services, including manicures, pedicures, nail extensions, gel nails, and nail art designs.
• Maintain high standards of cleanliness and hygiene at all times.
• Recommend a variety of nail designs and artistic options to clients.
• Assess the condition of clients' nails and offer advice on proper nail care and appropriate treatments.
• Sanitize all nail tools and equipment before each use.
• Keep workstations tidy, organized, and hygienic.
• Ensure nail supplies are well-stocked and available.
• Advise clients on nail care products, techniques, and suitable colors.
• Promote and sell nail care products to clients.
• Schedule appointments and handle payment transactions.
• Perform other duties as assigned.

Requirements

• With or without experience – Candidates with experience will be an advantage.
• Willingness to work on weekends and public holidays.
• Strong communication skills and a cheerful, positive personality.

Other Information:

• Good and comfortable working environment
• Annual and Medical Leave
• Basic Salary: Up to $2500
• Incentives: Performance-based
• Annual Wage Supplement (AWS): Included 13th month

Our client is Singapore leading player in Real Instate industry. Due to their current expansion plan, they are looking for a Retail Operations Manager, in hopes of expanding their retail operation team. They are located in the Town area – easily accessible.

Duties of Retail Operations Manager:

• Lead and Manage Operations: Direct the team in developing and executing strategies to enhance and maintain asset value across the portfolio.
• Ensure Smooth Operations: Oversee programs to guarantee continuous service for utilities, air conditioning, fire protection, and security. Ensure staff are trained in fire and life safety systems and all maintenance programs are up-to-date.
• Asset Management: Review and implement annual Asset Plans for each property.
• Tenant Management: Handle lease agreements, manage tenant renovations, and maintain strong tenant relationships.

Requirements:

• Degree in relevant field
• Minimum 7 years of retail mall management experience
• Good communication and stakeholder relationship management skills

Interested candidates who wish to apply for the advertised position, please email an updated copy of your resume/cv.

We regret that only shortlisted candidate will be notified.

• Email Address: [email protected]
• Recruitpedia Pte Ltd
• EA License No: 19C9682
• EA Personnel No: R2198636 (Oh Puey Xin)

Salary: S$2,300 to S$2,500, negotiable based on qualifications and experience.

Overtime pay will be provided for additional hours worked.

Work schedule: 5-day work week with standby and overtime requirements.

Position Overview

We are looking for a skilled Electrical Technician to join our team. This role involves installing network equipment and DC power terminations in data center environments, as well as associated infrastructure such as fiber optics and cable management systems. The ideal candidate will have expertise in power systems, network installations, and excellent coordination skills to ensure the smooth execution of projects.

Key Responsibilities

• Install and configure network equipment, including fiber optic devices, servers, and network switches.
• Perform DC power terminations from Power Distribution Boards (PDB) to equipment racks in data centers.
• Power cable installation and termination
• Fiber optic and ethernet cable laying, termination, patching, and testing
• Construct and install cable management systems such as trunking and trays for power and fiber optic cables.
• Accurately label and document all cable installations.
• Coordinate with customers on project schedules and installation requirements.
• Maintain precise records of installations and ensure compliance with safety standards.

Requirements

• Certification in height safety or working at heights.
• Relevant technical certifications in electrical or network systems.
• Hands-on experience with DC power systems and distribution.
• Proven expertise in network infrastructure installations.
• Strong knowledge of fiber optic and ethernet cabling systems.
• Proficiency in cable termination and testing.
• Ability to interpret technical drawings and specifications.
• Competence in using documentation and labeling software.
• Keen attention to detail and strong problem-solving abilities.
• Excellent communication and customer service skills.

Interested applicants, please email your resume to [email protected]

Tan Li Lian

EA 01C3135

Reg R1100465

• Assisting in setting up the test equipment for production and engineering team.
• Handle all Test & Backend Equipment sustaining i.e. Bench, ATE, Handlers, Thermostream, ICOS, Laser Mark, etc.

Requirements:

• Nitec in Electronics / Electrical Engineering, Mechanical, Biomedical, Mechatronics
• At least 2 years of experience with Advantest 93000/Teradyne J750.
• Able to work rotating 12-hr shift

If you are keen to apply for the position, kindly email your detailed resume in MS Word to [email protected]

Please note that only shortlisted candidates will be notified.

For more job opportunities, please visit our website at www.recruit-expert.com

EA Licence: 19C9701

Registration: R21100996

Our client is Singapore leading player in Real Instate industry. Due to their current expansion plan, they are looking for a Retail Operations Manager, in hopes of expanding their retail operation team. They are located in the Town area – easily accessible.

Duties of Retail Operations Manager:

• Lead and Manage Operations: Direct the team in developing and executing strategies to enhance and maintain asset value across the portfolio.
• Ensure Smooth Operations: Oversee programs to guarantee continuous service for utilities, air conditioning, fire protection, and security. Ensure staff are trained in fire and life safety systems and all maintenance programs are up-to-date.
• Asset Management: Review and implement annual Asset Plans for each property.
• Tenant Management: Handle lease agreements, manage tenant renovations, and maintain strong tenant relationships.

Requirements:

• Degree in relevant field
• Minimum 7 years of retail mall management experience
• Good communication and stakeholder relationship management skills

Interested candidates who wish to apply for the advertised position, please email an updated copy of your resume/cv.

We regret that only shortlisted candidate will be notified.

• Email Address: [email protected]
• Recruitpedia Pte Ltd
• EA License No: 19C9682
• EA Personnel No: R2198636 (Oh Puey Xin)

Job Purpose:

He / She will assist Maintenance Manager in all operations & maintenance concerns. Maintain good housekeeping in Facilities/Maintenance department; ensure good safety practice and also safe custody of keys, tools, documentation, equipment and other properties belonging to Facilities / Maintenance department.

Job Responsibilities:

Operation and Maintenance

1) Oversee the facilities management within the premises

2) Compiling the monthly utilities report and tabulations

3) Monthly M&E reports

4) Assist to develop and implement of Standard Operating Procedures (SOP) as and where

necessary

Interfacing with the Club Member

5) Providing updates on ad-hoc repair and outstanding issues

6) Attending to Club Member maintenance related feedback or requests

7) Coordinates the preventive and corrective maintenance works schedule with the contract

requirements and team availability

8) Review the contractor's submitted quotations and prepare a formal proposal for discussion with the

maintenance manager

9) Inspect works carried out are proper and in satisfaction

10) Liaising and managing contractors

Leading the on-site technical teams

11) Provide guidance, training and supervision to technical staffs to ensure proper execution of

assigned task

12) Planning of maintenance schedule

13) Review and planning monthly maintenance schedule

14) Oversee all work is carried out timely and smoothly by the staffs

15) Responsible for maintaining proper equipment listing, inspections of the buildings

16) Report on maintenance issues and critical incidence and to supervise contractor &

technician

17) Inspect and check on site that works orders have been carried out accordingly and on time

agreed

18) Carry out preventive and corrective maintenance work

18) Others

· Follow the workplace safety and health system, safe work procedures or safety rules implemented at the workplace.

· Not engage in any unsafe or negligent act that may endanger yourself or others working around you.

· Use personal protective equipment provided to you to ensure your safety while working. You must not tamper with or misuse the equipment.

19) Any other ad-hoc assignments assigned by the Management.

Job Requirements:

Diploma in Facilities Management, Engineering, Estate Management or other relevant qualifications from a recognized institute with minimum 3 years relevant experience.

Skills and Competencies

· Good interpersonal skills

· Team player

· Microsoft Office

· Other relevant certificates will be advantageous

Working Schedule:

6 days work week

Job Duties:

Prepare and cook assigned dishes for serving according to the menu
Keep kitchen area, processing equipment, and cooking utensils clean and sanitized at all time
Process all food according to companies and government regulatory control
Able to fill in any area of kitchen at any time.
Keeping the utensils and equipments clean and sanitary.
Removing trash and storage bins
Ensure safe operations of all equipment and report any faulty equipment to superior immediately
Comply with hygiene and safety regulations set by the Company, clients and government
Perform any other related duties as assigned by immediate superior.

Job Requirements:
Proven min 1-3 years of experience as chef.
Food Hygiene cert
Able to communicate skills and team player
Cheerful and self-motivated with positive working attitude
Able to work at a fast pace environment
Able to work on public holidays and weekends.
Able to work night shift and split shift.

Roles and Responsibilities:

1. Performs total preventive maintenance (TPM) procedures as planned.

2. Performs inspections required by scheduled TPM or Work Order requests.

3. Performs basic troubleshooting on mechanical and hydraulic equipment.

4. Perform regular maintenance tasks at the facilities in accordance with the SOP.

5. Identify and pro-actively respond to maintenance and operation needs.

6. Support the Maintenance Supervisor (Mechanical) in performing the maintenance duties.

7. Allocate appropriate resources to execute the work order, follow up work order and ensure that resources are used to optimum effect.

8. Assessing the need of mechanical spare parts to avoid delays in TPM. Tool & instrument inventory/ maintenance.

9. Establish and run small workshop activities.

10. Identify and pro-actively respond to abnormality.

11. Trouble shoot equipment failure and execute TPM work.

12. Attend to equipment breakdowns and propose remedial actions and conduct follow up checks.

13. Work to incorporate efficient methods of maintaining new equipment or plant and involved in the installation and commissioning process.

14. Ensure all maintenance activities carried out are following relevant quality and environment policies, safety & environmental rules, and regulations requirements.

15. Supervise any external vendors providing maintenance services.

16. Support the maintenance Supervisor to develop and implement plant improvement plan.

17. Complete and maintain accurate, timely documentation and records as required by the Maintenance Supervisor.

18. Undertake any other duties as assigned by the management.

Requirements:

1. Minimum NITEC / Diploma in Mechanical Engineering or equivalent with 2 years of experience in a Power Plant environment.

1. Experience in Electrical field.
2. Possess good working knowledge of all operations in the plant.
3. Positive and highly motivated individual.
4. Possess can-do attitude.

We are seeking a skilled Diagnostics Technician for our workshop specializing in continental cars. You will diagnose, troubleshoot, and repair vehicles to ensure they meet safety and performance standards.

Key Responsibilities:

• Use diagnostic tools to identify and resolve vehicle issues.

• Inspect and repair mechanical and electrical systems.

• Follow standard procedures for vehicle inspections and repairs.

• Record diagnostics, repairs, and parts used accurately.

• Participate in risk assessments for new equipment and vehicles.

• Responsible for advising the relevant manager of any factors directly affecting the daily schedule of programmed work.

• To inform the manager of any compromises of company maintenance procedures, or health and safety standards.

• Technical investigations into failed components or vehicle breakdowns.

• Investigate and report on all vehicle major unit failures.

• Establish reasons, trends and make recommendations for improvements to preventative maintenance procedures.

• Carry out physical repairs to vehicles, if necessary.

• Conduct road tests to confirm repairs.

• Train and support workshop mechanics on diagnostic systems.

• Stay updated on new systems and maintenance techniques.

• Report recurring defects and suggest preventative measures.

Requirements:

• Possess Degree in Mechanical Engineering or Automotive Technology, Mechatronics or equivalent or a similar Diploma with at least 3 yrs of relevant experience within the automotive diagnostic field.

• Experience as a Diagnostic Technician in an automotive workshop.

• Knowledge of continental car systems and diagnostic tools.

• Possess a valid Class 3 driving license

• Familiar with modern repair techniques and the use of electronic and mechanical diagnostic equipment.

• Ability to interpret technical manuals and diagrams.

• Problem-solving skills and attention to detail.

• Relevant certifications in automotive technology or diagnostics are a plus

Job Description:

• To ensure electrical, instrumentation and control engineering technical scope performance meeting the project specification, budget and stakeholder expectation.
• Identify and responsible the electrical, instrumentation and control engineering deliverables.
• Responsible the electrical, instrumentation and control engineering change order and meeting the delivery lead time and stakeholder expectation.
• Able to read and implement the project technical specification to the project deliverables.
• Attend client/ consultants meeting for technical clarifications and related activities.
• Facilitate the generation of the control, electrical and instrumentation engineering risks and mitigations for the project risk register.
• Manage the electrical and instrumentation package vendors and review vendors’ quotation
• Ensure CIE engineering is completed accurately within schedule and budget
• Conduct FAT/SAT and equipment troubleshooting
• Prepare panel drawings, circuit drawings and all electrical documents
• Prepare instrument data sheets and instrument list
• Prepare automation engineering documentation such as functional description specifications, control philosophy, control system architecture
• Design of Electrical & Instrumentation panels based on water and wastewater treatment process requirements (focus on RO & MBR applications basis)
• Identify instruments, electrical equipment and components to procurement.
• Any other duties commensurate with the role.

Requirements:

• Degree in electrical engineering, electrical and electronics engineering, control and instrumentation or related fields
• Experience in water and wastewater treatment projects a plus
• 5 years and above experience.
• Experience in the industries standard, NORSOK, NEK, PSA, IEC, BS & etc. and hazardous areas classification.
• Willing to travel overseas
• Good verbal and written communication skills in English
• General computer knowledge is essential (MS word, excel, PowerPoint, MS Outlook).

Responsibilities

• Conduct preventive maintenance and regular inspections of installations, fixtures and fittings, equipment, common facilities and property to ensure they are clean, safe and in good working condition.
• Undertake minor building, mechanical and electrical repair works, and handyman works (such as changing of light bulbs, reset drawer locks, etc).
• Monitor and attend to maintenance service requests, investigate and initiate corrective actions
• Daily, weekly and monthly inspection of key facilities, systems and critical areas.
• Coordinate and supervise the rectification of defects, maintenance, replacement and upgrading works
• Supervise contractors/vendors performing maintenance works on building facilities (e.g. Building maintenance, Mechanical & Electrical systems (M&E), horticulture, cleaning, pest control etc).
• Monitor utilities consumption by taking water and electricity meter readings and report out of normal consumptions.
• Assist in fire safety management, emergencies and business continuity plan
• Coordinate and work with audio and visual equipment and cleaning contractors to set up meeting venues including seating arrangements and equipment.
• Update information databases and breakdown record for engineering systems.

Requirements

• Relevant experience in building operation and maintenance of building facilities.
• The technicians shall hold minimum a NITEC/Higher NITEC in Facility Management or Mechanical and Electrical Services or equivalent.
• Additional experience in electrical system, uninterruptible power supply, generators, FM200, fire alarm, sprinkler, high voltage and low voltage switchboards will be an advantage.
• Additional qualifications such as Electrical Worker License/Singapore Certified Energy Manager (Associate)/Green Mark Facilities Manager will be an added advantage.
• Good interpersonal skills with a customer-oriented mindset.

Description:

• You will be responsible for providing sterile and serviceable surgical instruments and equipment.
• You will be involved in the decontamination, inspection, preparation, packaging, sterilization, storage and distribution of the sterile devices to operating theatres and procedural rooms.
• You will also be involved in projects involving work-process improvements as you gain experience in the department.

Requirements:

• Min Diploma in any Engineering
• Able to commit to rotating day & night shift work
• No exp needed, training provided

Location: Outram

Working hours: 3 rotating shifts (8am to 4.35pm; 1pm to 9.35pm; 9pm to 7.30am)

Interested candidates, please forward your resume to [email protected]

Consultant: Huang Jingsheng Kevyn (R1333338)

Recruit Express Pte Ltd (99C4599)

• MNC Company
• Basic $2500 - $3500 + Allowance + Quarterly Incentive + AWS
• Excellent Welfare and Benefits + Career progression
• Working location: West
• Working hours: Normal Working Hours

Job Responsibilities:

• To perform overhaul repair duties
• To perform all troubleshooting and diagnostics with appropriate recommendations
• To check and provide correct recommended Parts details in the Work Order as and when required
• To carry out Service Maintenance on the trucks
• To perform all repairs (Mechanical, Electrical, Electronic etc)
• To record repair time and detail of repair in the Work Order
• To keep Team Leader updated on the repair details and repair requirements
• Adhere to Warranty Process and Procedures (Warranty tagging of parts, return and storage of warranty parts etc)
• Other ad-hoc duties as assigned

Job Requirements:

• Possess minimum NITEC in Automotive Technology or former NTC 3/2 in Motor Vehicle Mechanics or NTC 3/2 Heavy Duty Diesel Mechanics or Diploma in Automotive Engineering or related field
• Minimum of 2 years working experience in servicing and repairing heavy trucks
• Possess knowledge in vehicle electrical circuit diagram, deep engine, transmission and brake system is an advantage

Candidates are encouraged to apply this position via Apply Now button with the following information in the resume

• Work experiences and job responsibilities
• Current and Expected salary
• Reason for leaving
• Date of availability
• Education background

We regret that only shortlisted candidates will be contacted.

Leong Wei Ling (R23117584)

EA Recruitment Pte Ltd

EA License No: 21C0492