Overview
The job-holder is responsible to provide a safe and clean environment for the surgical patient.

Job Responsibilities
Primary Responsibilities (80%):
• Check the suction and diathermy machines for cleanliness and good working order
• Check operating lights for clarity and good functioning
• Clean, check and prepare operating table and accessories
• Prepare the operating room for each patient scheduled on the operating list
• Assist in the safe transfer of patient from trolley to operating table and vice versa
• Assist in positioning the patient
• Assist surgeon in application of tourniquet
• Adjust and focus the operating lights and assist nurses in patient care
• Perform daily inventory check on positioning aids and accessories
• Perform cleaning of the operating room in between cases within 15mins
• Clear soiled linen and surgical wastes to the disposal room after the next case had started or when necessary time allows
• Ensure that the disposable suction liner is capped tightly before discarding into the biohazard bag
• Maintain proper housekeeping of OT suite which include operating room, prep-room, scrub room, Anaes room and sluice room daily
• Do terminal cleaning at the end of the list or after infected cases as stated in the protocol
• To stay in the operating room to assist the surgical team when needed, eg. Change the suction liner, additional adhoc equipment needed etc
Secondary Responsibilities (20%):
• Maintain proper housekeeping of pantry
• Transport patient from the ward to OT and vice versa
• Perform routine cleaning of OT equipment e.g. tourniquet, light source etc weekly
• Perform any other duties as assigned

Requirements
• WSQ Higher Certificate in Healthcare Support (Operating Theatre Support) or relevant working experience as an Operating Theatre Technician
• Possess initiative and keen to learn
• Possess good interpersonal and communication skills

If the role sounds interesting to you, please contact ‘[email protected]’ to understand more on the role. Please indicate the position that you are interested in the subject heading.

Job Description:

- Perform production assemblies and operate plant equipment in accordance to process sheets, approved procedures or operating work instructions

- Perform simple machine set-up

- Do in-process inspection in accordance to approved processes.

Job Requirements:

- Nitec in any engineering fields

Responsibilities:

• Perform regular maintenance and calibration of laboratory equipment to ensure optimal performance and accuracy, and maintain comprehensive records of all maintenance activities.
• Provide technical support to sales teams by conducting application testing and product demonstrations. Responsibilities include but not limited to performing product tests, analyzing samples, and preparing detailed technical reports to support sales efforts.
• Plan, coordinate, and execute events such as trade shows, conferences, and seminars. Responsibilities include developing event plans, coordinating with vendors, suppliers, and internal teams, managing logistics, and handling post-event publicationsand follow-ups.
• Design and produce various marketing materials, including brochures, flyers, presentations, and digital content, ensuring alignment with company objectives and branding guidelines.
• Develop and implement social media strategies to boost brand presence and engagement across various platforms, including Facebook, Twitter, LinkedIn, and Instagram.
• Oversee the continuous development, maintenance, and optimization of the company website. Collaborate with web developers and designers to ensure the site remains functional, up-to-date, and aligned with company goals.
• Stay updated on industry and social media trends and incorporate innovative design elements into marketing and publicity strategies.

Qualifications:

• Minimum Diploma in Chemical Engineering, Biochemical Engineering, Environmental Engineering or equivalent.
• Proven strong team player with good interpersonal and communication skills.
• Microsoft words, excels, power point literate.
• Fresh graduates may apply.
• Experience in hollow fiber membrane production setup and operation is a plus.

• Good Bonus - AWS + up to 6 month Variable Bonus / Permanent Role

Engineer / Electrical engineer / Project Engineer / Junior & Senior & Engineering can apply

• Entry level / Junior / Senior / No experience welcome apply X 3 Opening

• Full training provided

Responsibilities:

§ To manage and execute EMS/DMS SCADA projects and service contracts

§ Carry out routine and corrective maintenance, software enhancement, bug fixes, testing and commissioning to meet contractual requirements

§ Ensure smooth and proper execution of projects/contracts

Requirements:

§ Diploma/Degree in Electrical/Electronics/Computer/Software Engineering from a recognised Polytechnic/University

§ Preferably have some working experiences in executing /maintaining of SCADA and Substation Automation System.

§ Strong software skills.

§ Knowledge of UNIX OS and C, C++, Java programming language.

§ Our benefits and compensation for permanent position are as follows:

§

§ Salary for experience candidates will be considered based on the years of experience and our internal salary structure

§

§ 1 month AWS

§ Variable Bonus ranging from 1 to 6 months depending on individual and company performance

§ Working hours: 8.00 am to 5.00 pm / 8.30 to 5.30 pm / 9.00 am to 6.00 pm / 9.30 am to 6.30pm / 10.00am to 7.00pm

§ Working days: Monday to Friday (1 day work from home per week)

§ Annual Leave: 14 days up to 17 days for non-executive (Assistant Engineer and below)

§ 18 days up to 21 days for executive (Engineer and above)

§ Medical benefits of $500 per financial year (Benefit is extended to spouse and children (below 21 years old) of married employees)

§ Insurance coverage: Hospital & Surgical (Benefit is extended to spouse and children (below 25 years old) of married male employees and child (below 25 years old) of married female employees)

§ Term Life

§ Personal Accident

§ Maternity Insurance for female employee and spouse of male employee on the birth of their 1st 2 children claimable up to delivery bill of $6,000.00 whichever is lower.

§ Flex Dollars of $500 per financial year

§ Free annual year-end Health Check-Up

§ Monthly Birthday Party Celebration

§ Monthly Sports Activities

§ New Born Gift

§ CSR Initiatives

§ Department Bonding Activities

§ Biennial team building and staff appreciation dinner

§ Gym Corner for employees to exercise

§

§ Good Pay + Good allowance + Good Bonus

§ Interested candidates please send an updated Resume / CV in Ms Word format to [email protected] or WhatsApp’s your resume to 98332779 ( no Calls)

§ Consultant in-charge : Quah Li Lian (Lilian) ( Registration No: R1983286 )

Singaporeans or PR ONLY

Experienced AV Technician and driver

Singapore class 3 (Manual) driver license and driving experience required

Job Highlights

===========

Full Time position.

Opportunity to upskill and learn new things. Career advancement

Opportunities to try out and be exposed to new technologies

Casual environment

Roles & Responsibilities include but not limited to:

======================================

- Follow arrangements and company standard procedure.

- Safely transporting audio visual equipment to specified locations in a timely manner.

- Assisting with the loading unloading packing and setup of TV and speakers.

- Ensuring that the company vehicle is always parked in areas that permit parking in order to avoid towing / fines.

- Ensuring safe driving at all times and not tail-gating vehicles in order to avoid accidents and damages to the delivery vehicle.

- Keeping the company vehicle clean and properly maintained by performing regular washing, cleaning and vehicle maintenance.

- Reporting any accidents and vehicle damage to management.

- Good working attitude and communication skills

- Able to work OT

- Setup TV

- Setup Speakers and other AV equipment

- Lay cables in a neat manner

General Requirements

==================

- Singaporeans or PR ONLY

- Experienced AV Technician and driver

- Singapore class 3 (Manual) driver license and driving experience required

- Highly responsible, punctual and good time management

- Attention to details and well organised

- Good team player with service-oriented mindset

- Experience setting up sound system, digital and analog audio mixer, LED video wall and other AV equipment will be ideal

- Work at height certification will be ideal

- Versatile, willing and flexible to take on broad spectrum of tasks and new tasks

- Adaptable to changes, stress and last minute requirements

- Positive, can do attitude

- Calm and level headed

- Good problem solver

Duties

• Process prescriptions and dispense medications, according to set standards and guideline
• Provide medication counseling to patients
• Handle simple prescription interventions
• Manage drug inventory which includes stock replenishment, conducting stock counts and inventory checks
• Supervise and provide training to new pharmacy technicians/assistants
• Assist pharmacists in simple projects

Requirements:

• Diploma in Pharmaceutical Science or GCE ‘O’ Level with a Certified Pharmacy Technician Certification

Interested and qualified candidates, please send in your application to [email protected]

Ivy Yong Shi Mei

Personnel EA License No.: R2198995

Recruit Express Pte Ltd (EA Licence No.: 99C4599)

Job Highlights

• Permanent position
• AWS and Variable Bonus
• Transport Allowance
• 5 days’ work week; Monday to Friday: 8.30am - 5.45pm

Summary

• To perform preventive and corrective maintenance works on equipment, and standby duties as required so that the equipment can function properly and safely

Responsibilities

• Carry out preventive and corrective maintenance works in accordance with the schedule
• Observe safety work procedures
• Perform standby works when required
• Follow up on breakdown report and assist Standby Section where required
• Keep proper records of works carried out in the relevant reports
• Attend to the building or equipment inspections as required, by law (BCD, FSB)
• Assist in conducting and investigating of damages/accidents to equipment or personnel
• Follow up on QC and QA defects.

Requirements

• Nitec/ Diploma in Mechanical/ Electrical/ Engineering or equivalent qualification
• Min 1-2 years of relevant working experience in Lift or similar industry
• Possess own vehicle
• Can start work immediately or at a short notice
• Possess Valid Certificate of Competency (CoC) in relevant field

**Salary will commensurate with experience and senior position**

Interested candidates, please e-mail resume in Word document (indicating your current salary and expected salary) to:

Ryan Tan (EA Reg. no.: R23116422)

Recruitment Manager

Right Recruit Pte. Ltd.

10 Anson Road, #33-03, International Plaza, Singapore 079903

EA Licence No: 23C1743

[email protected] I www.rightrecruit.com.sg

· Performs repetitive tasks that require detailed instructions and to follow procedures.

· Follow detailed instructions and work will be reviewed on regular basis.

· Some physical effort handling of light weights such as supplies or materials on an infrequent basis (5-15 kgs)

· Interpret technical drawings and work instructions.

· Perform mechatronics assembly, panel wiring and test.

· Assembly, alignment, test and troubleshooting.

· Update and documenting results.

Job Summary:

The Central Kitchen Facility Specialist plays a crucial role in maintaining the highest standards of cleanliness and hygiene in our central kitchen. This position ensures that all kitchen areas, equipment, and trays are thoroughly cleaned and maintained to meet safety and health regulations. The role also involves performing routine inspections and minor repairs to ensure the kitchen operates smoothly and efficiently.

Key Responsibilities:

1. Cleaning and Sanitization:

• Thoroughly clean and sanitize container, tray, equipment and surfaces according to established protocols.
• Ensure all areas of the central kitchen, including floors, walls, and storage areas, are kept clean and free from contaminants.
• Follow daily, weekly, and monthly cleaning schedules to maintain a high standard of cleanliness.

2. Equipment Maintenance:

• Perform routine checks on container, tray and equipment to ensure they are in good working condition.
• Report any malfunctioning or damaged items to the supervisor and assist with minor repairs when necessary.
• Coordinate with external service providers for major repairs or maintenance tasks.

3. Compliance and Safety:

• Adhere to all health and safety regulations, including food safety standards and OSHA guidelines.
• Use personal protective equipment (PPE) as required and ensure all cleaning supplies are handled safely.
• Keep accurate records of cleaning schedules and maintenance activities for inspection and audit purposes.

4. Inventory and Supplies Management:

• Monitor and replenish cleaning supplies and equipment inventory to ensure adequate stock levels.
• Assist in receiving and storing deliveries in compliance with storage guidelines.
• Track usage and report any discrepancies or needs for additional supplies.

5. Support Kitchen Operations:

• Collaborate with kitchen staff to support on kitchen operations and ensure cleaning activities do not disrupt food preparation.

6. Training and Improvement:

• Mentor and guide junior team members or temporary staff on proper cleaning procedures.

Qualifications:

· Basic Food Hygiene Cert required

· High school diploma or equivalent; additional certification in sanitation or facilities management is a plus.

· Proven experience in a cleaning or maintenance role, preferably in a commercial kitchen or food service environment.

· Familiarity with health and safety regulations related to kitchen operations.

· Ability to perform physical tasks, including lifting and moving heavy items.

· Excellent organizational skills and attention to detail.

· Good communication skills and ability to work as part of a team.

Physical Requirements:

· Physical fit

· Able to carry between 15-20kg

Other Information:

· Job Type: Full Time, Permanent/Part time

· 6 days’ work week (Mon-Sun rotating shift)

· Work hours – 11 hours including 1 hour meal break

Our client is from Oil and Gas industry, a local leading player. They are looking for a Electrical Maintenance Supervisor for the next phase of their business. They are located in West.

Duties:

• Ensure compliance with safety procedures and electrical codes.
• Supervise and lead electrical technicians and contractors in installation, maintenance, and repair of systems.
• Develop and conduct structured on-the-job training for E&I team members.
• Inspect and ensure quality control of all electrical works.
• Review and approve electrical isolation and excavation permits.
• Lead investigations into electrical maintenance issues, identifying root causes and implementing solutions.
• Collaborate with engineers to develop and implement maintenance programs for reliability.
• Conduct morning toolbox meetings focusing on safety and maintenance activities.
• Participate in emergency response procedures with assigned roles and responsibilities.

Requirements

• Min Diploma in Electrical Engineering related field.
• Min 8 years’ experience in Oil & Gas or Petrochemical industry
• Experience in E&I maintenance and supervisory

Interested candidates who wish to apply for the advertised position, please click APPLY NOW or email an updated copy of your resume/cv.

We regret that only shortlisted candidate will be notified.

Email Address: [email protected]

Recruitpedia Pte. Ltd.

EA License No: 19C9682

EA Personnel No: R2198636 (Oh Puey Xin)

Our client is a well-established MNC, market leader in the 3PL Logistics industry. Due to their current expansion plan, they are looking for Facilities Executive to join their Facilities Management team, in hopes of developing the current high performing team. They are located in the East - easily assessible.

Responsibilities of Facilities Executive:

• Set up facilities for logistics operations.
• Ensure critical office, warehouse, and building equipment are operationally ready.
• Oversee facilities management for warehouses and offices.
• Source and manage service providers for various facilities needs, such as M&E, cleaning, pest control, and landscaping.
• Ensure services align with site conditions.
• Review and supervise repair and maintenance contracts, handling minor repairs as needed.
• Ensure service delivery meets contractual agreements.
• Conduct regular inspections and implement preventive maintenance programs.
• Engage maintenance services at competitive costs.
• Collaborate with safety teams, customers, and government agencies on facility-related safety and audit issues.
• Ensure procurement and services comply with quality and regulatory standards.
• Perform duties as a Certified Fire Safety Manager.
• Assist with emergency response for fire or facility breakdowns.
• Lead and implement green initiatives.

Requirements:

• Min Diploma
• Experience in facilities management of commercial building

Interested candidates who wish to apply for the advertised position, please click APPLY NOW or email an updated copy of your resume/cv.

We regret that only shortlisted candidate will be notified.

Email: [email protected]

Recruitpedia Pte. Ltd.

EA License No. 19C9682

EA Reg. No. R2198636 (Oh Puey Xin)

Our client is from Oil and Gas industry. They are looking for a Senior Mechanical Engineer for the next phase of their business. They are located in West.

Duties:

• Responsible in guiding the maintenance, troubleshooting, repair, commissioning and substitute of mechanical or piping equipment within the Gas Engine Generators as well as its additional systems such as gas engine, pipeline, pressure pipe, ACMVs, lube oil and coolant pumps arrangement.
• Responsible in supporting mechanical support and solutions for the process & care and providing the development of care strategy including procedure/specification focusing on equipment dependability, spares inventory necessity, shutdown and inspection lists, preventive and prophetic care programmed.
• Responsible in managing and work meticulously with internal contractor and equipment seller to perform maintenance work at the Gas Engine Generators Building and terminal.
• Responsible to make certain compliance to appropriate regulations, manipulate safely, fit for object, maintainable and trustworthy for the site’s modified or anew build mechanical setup (such as gas engine, pumps, gravity vessel, safety facilities, etc).
• Responsible in guiding technical negotiations, execute and succeed project schedules or cost as well as collaboration with outward and internal shareholders, merchants for end of life and development project using company Management of Change process for machinery facilities.
• Responsible in supplying technical practicing as required in the area of process, maintenance, fault resolution of the Gas Engine Generators.
• Responsible in contacting with exterior investor including administration agencies on approbation and risk of closure of electrical arrangement that will influence gas-send out.

Requirements

• Min Bachelor’s Degree in Mechanical Engineering or any relevant field.
• Min 3 to 5 years’ experience in relevant industry for maintenance of rotary and staticequipment is needed
• Prior experience in different types of gas/diesel machine knowledges is a bonus.

Interested candidates who wish to apply for the advertised position, please click APPLY NOW or email an updated copy of your resume/cv.

We regret that only shortlisted candidate will be notified.

Email Address: [email protected]

Recruitpedia Pte. Ltd.

EA License No: 19C9682

EA Personnel No: R2198636 (Oh Puey Xin)

Our client is from Oil and Gas industry, a local leading player. They are looking for a Senior Engineer, Instrumentation & Control for the next phase of their business. They are located in West.

Duties:

• Provide technical support for Production and Maintenance teams on instrument-related issues.
• Work with teams to reduce instrument maintenance costs and improve functionality.
• Coordinate with external stakeholders on gas pipeline networks, electrical grids, instruments, and metering interfaces.
• Update maintenance procedures for instruments, PLC, Fire & Gas systems, ESD, metering, CCTV, and security equipment.
• Conduct root cause analysis for instrument incidents and recommend preventive actions.
• Implement MOC projects to enhance instrument reliability and operational efficiency.
• Ensure verification, inspection, testing, and certification of electrical and instrument equipment in hazardous areas.
• Support maintenance and major equipment turnarounds.
• Manage the functional safety lifecycle of SIS in the terminal.
• Assist in expansion projects, ensuring facility integrity and seamless integration.
• Participate in emergency response with designated roles and responsibilities.

Requirements

• Min Bachelor’s Degree in Engineering related field.
• Min 5 years’ experience in Oil & Gas or Petrochemical industry
• Experience in instrument & control maintenance

Interested candidates who wish to apply for the advertised position, please click APPLY NOW or email an updated copy of your resume/cv.

We regret that only shortlisted candidate will be notified.

Email Address: [email protected]

Recruitpedia Pte. Ltd.

EA License No: 19C9682

EA Personnel No: R2198636 (Oh Puey Xin)

• Setting up and installing new printers, copiers, scanners, and copier management software.

• Providing routine service and maintenance to copiers, scanners, printers, and fax machines.

• Troubleshooting and repairing malfunctioning cartridges, printers, and copiers.

• Writing diagnostic reports and training manuals.

• Providing demonstrations and customer training.

• Managing orders and stock of new equipment, parts, and materials.

• Providing excellent customer support and service.

• Managing schedules and customer emergencies.

• Keeping abreast of the latest technologies and practices in the industry.

Job descriptions:

• Maintain the facilities with routine checks on electrical, air-conditioning systems, compressed air and chilled-water systems.
• Contact and work with contractors for routine servicing and emergency repair in order to keep the building in daily operational state.
• Supervise vendors during renovation in order to ensure a smooth transition to new areas.
• Maintain good housekeeping in AHU and switch room to maintain cleanliness of equipment and site.
• Work with contractors and vendors to carry out schedules and supervise work on premises to ensure quality cost-effective repairs and renovation.
• Must be able to hands on to carry out repair for sanitary and plumbing works, electrical works and building works.
• Must be able to carry out simple fault finding for telephone lines.
• Any other duties that may be assigned from time to time.

Requirements:

• Minimum NTC education in Facilities / Electrical / Mechanical / Building Services with 2 years of experience in building maintenance and facilities support.
• Certificate in Building Maintenance/Building Inspection will be of an added advantage
• Good problem-solving skill
• Good communication skills
• Be able to work under pressure and multi-tasks
• Must be willing to travel to other locations for repair work

Working days : 5.25 days per week

Working Hours:

Mondays to Fridays : 0900hrs to 18000hrs

Alternate Saturdays : 0900hrs to 1300hrs

Working Locations: Ubi Road 1

CG Group is sourcing for local candidate to fill up the position of Gardener.

• Full time gardener with a passion for greenery.
• 5.5 days work per week
• Watering of plants, weeding, prune and removal of dried leaves, trimming of plants.
• Possess the attitude to learn, training provided.
• We welcome local elderly / middle / retiree to be part of our group.
• Selected candidate will be expecting full benefits after 3 months probation period.
• Work site: Sembawang
• Working hours:-
• Weekday: 9am to 6pm
• Saturday(s) 9am to 1pm
• Sunday(s), Public Holiday Off.

Interested parties, may send your resume at [email protected] or call us at +65 6268 8831. We look forward to your application soon.

• Attend to walk in customer to service center.
• Provide IT hardware service and support (e.g: PC. laptops, etc)
• Timely update of the service status to customer.
• Ensure proper parts handling and movement.
• Troubleshooting of hardware and software issues.
• Install Operations system, firmware and bios.
• Handling, resolving and keeping track of assigned through ticketing system.
• Work closely with other team members to ensure jobs are completed and close timely.
• Attend new product training.

Job Requirements

• Min NITEC in Electronics, IT, Computer or related field.
• Basic computer hardware knowledge
• Flexible and adaptable to change.
• Good customer service mindset.
• Good communication skills
• Monday - Friday (9am to 6pm) / Alternate Saturday (9am to 1pm)
• Work location at CT Hub (Kallang)
• Salary $2300 to $3000

Interested applicants please send in your MS Word resume. Shortlisted candidates will be contacted very soon. Thank you.

Location: Ubi (Nearest MRT - Macpherson)

Working Hours:

Mondays to Fridays : 0900hrs to 18000hrs

Alternate Saturdays : 0900hrs to 1300hrs

Job descriptions:

• Routine checks and maintain electrical, air-conditioning systems, compressed air and chilled-water systems.

• Liaise and work with contractors for routine servicing and emergency repair

• Supervise renovation to ensure a smooth transition to new areas.

• Maintain good housekeeping in AHU and switch room

• Must be able to carry out repair for sanitary and plumbing works, electrical works and building works.

• Must be able to carry out simple fault finding for telephone lines.

• Any other duties that may be assigned from time to time.

Requirements:

• Minimum NTC education in Facilities / Electrical / Mechanical / Building

Services

• Certificate in Building Maintenance/Building Inspection will be of an added

advantage

• Preferable 2 yrs experience in building and facilities maintenance

Our client is from Oil and Gas industry, a local leading player. They are looking for a Maintenance Technician for the next phase of their business. They are located in West.

Duties:

• Perform preventive, predictive, and corrective maintenance tasks as directed, and update the CMMS database.
• Maintain rotating and static equipment, plant piping, and structural support systems.
• Respond to and resolve equipment malfunctions, ensuring minimal downtime.
• Determine necessary materials, tools, and methods for safe maintenance tasks.
• Conduct machinery condition monitoring and field data collection with the production team.
• Ensure operational efficiency of all plant valves and mechanical components, including control and plant valve maintenance.
• Supervise in-house contractors and vendors, ensuring safety protocols are followed.
• Collaborate with the production team on mechanical system testing and troubleshooting.
• Take on additional tasks or responsibilities as assigned.
• Perform valve line-up and LOTO for maintenance preparations.
• Participate in the Company's Emergency Response Team (CERT) with assigned roles.

Requirements

• Nitec in Engineering related field.
• Min 5 years’ experience in Oil & Gas or Petrochemical industry
• Experience in troubleshooting of mechanical/ machinery systems

Interested candidates who wish to apply for the advertised position, please click APPLY NOW or email an updated copy of your resume/cv.

We regret that only shortlisted candidate will be notified.

Email Address: [email protected]

Recruitpedia Pte. Ltd.

EA License No: 19C9682

EA Personnel No: R2198636 (Oh Puey Xin)

Job Description:

- Setting up, maintaining and regular lubrication of machines.

- Run production to produce required output.

- Carry out effective in – process inspection

- Carry out adjustment of tooling and change of worn out tooling.

- Trouble shooting of production problem.

- Daily housekeeping.

- Training of operators & new staff

Job Requirements:

- Nitec in mechanical or electrical background preferred

- Able to comply to safety procedures.

-Must be able to lift heavy objects

- Able to commit to work shift work

• Assisting in setting up the test equipment for production and engineering team.
• Handle all Test & Backend Equipment sustaining i.e. Bench, ATE, Handlers, Thermostream, ICOS, Laser Mark, etc.

Requirements:

• Nitec in Electronics / Electrical Engineering, Mechanical, Biomedical, Mechatronics
• At least 2 years of relevant working experience
• Able to work from 7am - 7pm

If you are keen to apply for the position, kindly email your detailed resume in MS Word to [email protected]

Please note that only shortlisted candidates will be notified.

For more job opportunities, please visit our website at www.recruit-expert.com

EA Licence: 19C9701

Registration: R21100996

Job Requirements:

- Must possess driving licence, class 3

- Must be physically fit

- Must be customer service oriented

Job Responsibilities:

1. Carries out minor repairs through the provision of after sales servicing for end-users (Indoor and Outdoor Servicing)

2. Gives feedback received from end-user to management to enhance product quality and service.

3. Liaises with the Service Manager in handling customer complaints and the servicing of customers’ heaters

4. Responsible for giving customers satisfaction in line with our Company Quality Policy of Total Customer Satisfaction

5. Work harmoniously with both the internal customer (i.e. the Customer Service Officer) and the external customer (i.e. the end-user).

6. Reports any non- conformance matters to the Service Manager

7. Any other assignments as directed by the Service Manager

• Good Bonus - AWS + Up to 6 month Variable Bonus / Permanent Role

Engineer / Electrical engineer / Project Engineer / Junior & Senior & Engineering can apply
• Entry level / Junior / Senior / No experience welcome apply X 3 Opening
• Full training provided

Responsibilities:

• Manage the Supervisory control and data acquisition (SCADA) system and distribution management systems applications;
• Involved in enhancement of the software functionality and troubleshooting to maintain system reliability and performance;
• Maintain accurate records of maintenance activities, enhancements and fixes;
• Collaborate and communicate with both internal and external customers to ensure smooth execution of projects and provide timely updates on project status;
• Assist client for Annual Vulnerability Assessment and Penetration (VAPT) activity and follow up on the findings;
• Follow up with product supplier and vendors, test and install the system patching when necessary;
• Other ad-hoc duties as assigned.

Requirements:

• Diploma/Degree in Electrical/Electronics/Computer/Software Engineering from a recognized Polytechnic/University;
• Knowledge in programming languages such as C, C++ and Java;
• Knowledge in Solaris and Linux Operating System;
• Knowledge in oracle database, relational database management system (RDMS) and SQL commands;
• Salary for experience candidates will be considered based on the years of experience and our internal salary structure
  1 month AWS
  Variable Bonus up to 6 Month depending on individual and company performance
• Working hours: 8.00 am to 5.00 pm / 8.30 to 5.30 pm / 9.00 am to 6.00 pm / 9.30 am to 6.30pm / 10.00am to 7.00pm
• Working days: Monday to Friday (1 day work from home per week)
• Annual Leave: 14 days up to 17 days for non-executive (Assistant Engineer and below)
• 18 days up to 21 days for executive (Engineer and above)
• Medical benefits of $500 per financial year (Benefit is extended to spouse and children (below 21 years old) of married employees)
• Insurance coverage: Hospital & Surgical (Benefit is extended to spouse and children (below 25 years old) of married male employees and child (below 25 years old) of married female employees)
• Term Life
• Personal Accident
• Maternity Insurance for female employee and spouse of male employee on the birth of their 1st 2 children claimable up to delivery bill of $6,000.00 whichever is lower.
• Flex Dollars of $500 per financial year
• Free annual year-end Health Check-Up
• Monthly Birthday Party Celebration
• Monthly Sports Activities
• New Born Gift
• CSR Initiatives
• Department Bonding Activities
• Biennial team building and staff appreciation dinner
• Gym Corner for employees to exercise
• Interested candidates please send an updated Resume / CV in Ms Word format to [email protected] or WhatsApp’s your resume to 98332779 ( no Calls)
  Consultant in-charge : Quah Li Lian (Lilian) ( Registration No: R1983286 )

J ob Description:

• Responsible for the projects and addition & alteration works of hospital, medical centre and other associated business unit as instructed by the management
• Track preventive maintenance works and service contracts for the department and support the car park operations
• To assist in projects and addiction & alteration works as assigned by Head of Department or reporting Supervisor
• Facilitate and manage assigned projects within given deadline & budget
• Independent and resourceful. Good problem solving & analytical skills
• Able to work well with people from across different departments and levels
• Support the car park operations
• Assist in any other duties assigned
• Able to manage the work schedule of contractors/ vendors to ensure the work / project within the timeline with minimum disruption to the patients and staff
• Work with colleagues and contractors to ensure al physical plants and equipment are serviced as planned
• Any other duties assigned by the Senior Technician/Engineer/Supervisor.

Requirements:

• Min Bachelor Degree in Facilities Management

For interested candidates, please send your most recent and updated resume to [email protected]

Subject heading: Facilities Management Engineer

Andrea Eunice Tan Min Er
(R23112594)
Recruit Express Pte Ltd
EA License No. 99C4599

Job Summary:

• Monday to Friday, 8.30am-6pm
• Location: Near Seletar (nearest Mrt sengkang)
• Basic $1800-$2300 + AWS
• Must have experience or related education in the aerospace industry

Job Description:

• Refurbish and repair aircraft cabin interior parts.
• Inspect the cabin's appearance and measurements.
• Handle incoming inspections, disassembly, cleaning, and repairs.
• Perform regular maintenance and cleaning tasks.
• Use basic tools and equipment effectively.
• Follow safety rules in the workshop.

Interested Applicants, kindly send your updated CV to +65 8500 3939 or click on “APPLY NOW”.

We regret that only shortlisted candidates will be notified

EA Personnel Name: Chin Jia Hui, Janice
EA Personnel No: R22107485
EA License No: 15C7752