You will be part of our client’s Support & Services Field Service team responsible for preparation, testing, installation and commissioning of radar systems and preparation of technical documentation within the Defence and Security market.

Responsibilities

• Responsible for hardware and system installation, commissioning and testing.

• To provide troubleshooting, repair and maintenance activities.

• To prepare maintenance and installation documentations.

• To provide technical support to customers, by email, phone and on site.

• To generate service reports according to activities.

• To assist engineers as second engineer in installation, service, commissioning support worldwide.

• To undertake other ad-hoc duties when required.

Qualifications & Competencies

• Good knowledge on IT and communications systems.

• It is an advantage if you have experience in field support, installation, repair & maintenance of electronics and communications equipment, for example within radar or surveillance systems in aviation or marine related industry etc.

• ITE certificate or higher

• Basic mechanical skills is required

• Should be able to work at heights and be able to pass a Work-At-Height Course, which our client will provide for.

• Good command of written and spoken English and 1 local language.

• Willing to work long and irregular hours, including weekends when required.

• Required frequent regional travel for field assignments, approximately 50% of the year.

• Team player with good communication and interpersonal skills.

Salary: SGD 4,500 x 12 + AWS

Location: West, Singapore

Alternatively for immediate consideration, please send you resume to [email protected]

We regret that only shortlisted candidates will be responded.

Responsibilities:

• Site preparation and co-ordination, preparation of submission documents.
• Coordinate, liaise and manage various project stakeholders including customers, consultants, sub- contractors, vendors, etc. on site to ensure project requirements are met.
• Able to communicate effective to all stakeholders.
• Prepare and create detail work schedule, manpower and resource planning.
• Able to understand Engineering drawings and perform basic engineering calculations, design, etc.
• Coordinate the safety management system on site.
• Follow up and reporting on the project progress.
• Able to understand Singapore standards or Code of Practice.
• Ensure all site execution with valid approved drawing, Architect Instruction, Engineer Instruction, Written Instruction from client/ main contractor representative.
• Carried out assignment as detailed by the Senior Manager / Project Manager / Assistant Project Manager.

Requirements:

• Candidate must possess at least Diploma/Advanced/Higher/Diploma/ Degree in Electrical & Electronic in any engineering field or equivalent.
• Min. 2 years relevant experience in the Construction Engineering industry.
• Proficient with computer technology and Microsoft Office application (MS PowerPoint, Excel, Project)
• Knowledge in AutoCad, Revit, Naviswork, BIM360 or other design software with strong understanding of Drawings
• Fluent in English, both written & spoken and able to communicate with all levels of team members
• Independent, resourceful, pro-active and team player in a fast-paced environment.
• Possess good organization, planning, strong interpersonal, communication skills and project management skills
• Ability to work under tight deadlines
• Ability to interact effectively with project members and managers at all levels.
• Experience in MV / LV Electrical Equipment (Site Installation, Testing and Commmissioning, Maintenance Testing) will be an added advantage.

Brief description

You will be involved to implement and maintain a reliable quality control system to guarantee high quality products and solutions output from the company, and to plan and schedule its manufacturing order outputs.

Tasks

• Plan, and schedule all manufacturing orders, and prototyping activities in accordance to order priority,

• Ensure all its manufacturing use equipment and tools are prior calibrated to acceptable standards and records,

• To check all incoming supplies for customer’s production meets the adopted quality acceptance standards,

• To ensure all production outputs at various stages of manufacturing processes exceeds &/or meet customer’s requirement,

• Conduct all out-going goods meet the stipulated IPC & customer Quality control standards,

• To observe, identify, recommend, and implement improvement for company overall quality assurance and control system,

• Conduct ISO9001 internal audits as when scheduled,

• Develop, conduct any relevant technical or IPC based trainings to Manufacturing staffs as when required,

• Conducts product / solution failure analysis as when required for internal/external orders

Qualifications and Requirement

• Minimal Advanced Technical Certificates, Diploma or Degree in Electrical or Electronics Engineering discipline.

• Relevant working experience is preferred.

• Hands-on attitude towards problem-solving is essential.

• Able to interpret and understand electrical and mechanical drawings / datasheet and charts accurately and independently.

• Familiar with ISO9001:2015 QMS, and Audit Matters

• IPC standards trained (specialist) certification is preferred, otherwise training shall be provided (training bond applies)

• Honest and Strict, and have Good interpersonal communication skills.

• Well organized, responsible, and always strive to meet production datelines.

• 5.5 days work week

Position: 6-Month Contract Pharmacy Technician
Work Schedule: 5.5 days, Alternate Saturdays
Salary: $2200 - $2400, with benefits
Location: Novena Hospital ( Govt )

Your Role:

• Unit Dose Repackaging & Barcoding: Operate the Unit Dose Packaging System to repackage medications into barcoded unit doses.
• Quality Control & Audits: Perform QC checks on repackaged drugs and conduct storage audits across patient care areas.
• Inventory Management: Manage inventory within Barcode Pharmacy & Automated Dispensing Cabinets, ensuring medication safety and compliance.
• Operational Support: Oversee automated dispensing processes, conduct system checks, and ensure pharmacy equipment and workplace cleanliness.

Requirements:

• Educational Qualifications: Local Polytechnic Diploma in Pharmaceutical Science OR WSQ Certificate in Healthcare Support (Pharmacy Support)
• Technical Skills: Proficient in Microsoft Excel and Access
• Physical Requirements: Able to lift up to 7 kg and stand/squat for extended periods
• Work Environment: Comfortable working independently in a fast-paced environment
• Flexibility: Willing to work on alternate Saturdays and occasional extended hours

All qualified applicants, please click “ APPLY NOW”

Or you may send in your resume to:

Whatsapp: https://wa.me/+6597430026

Email : [email protected]

Kimmy Low Yi Ting (Kim) | CEI Registration Number: R23112122

Recruit Express Pte Ltd Company Reg. No. 199601303W | EA LICENCE Number: 99C4599

Title: Laboratory Technician (Semiconductor Wafer Processing)
Industry: Semiconductor Wafer Processing industries

Working hours : 9 am–5:45 pm
Working Days: Mon - Fri
Working location: Gul Ave, Singapore 629665
Salary: $3800 - $4000

DEPARTMENT : PRODUCT APPLICATION LAB
REPORTS TO : Technical Manager

About the company: A privately held, global company with a belief in innovation and employee empowerment. With over 1000 employees worldwide, a global supplier of specialty chemicals, custom finishing equipment, engineered powders, and analytical control systems to the electronic component, printed circuit board, semiconductor, industrial finishing and decorative industries.

Job Description

RESPONSIBILITIES

• Conduct plating chemical testing & analysis
• Conduct product functional performance testing & measurement
• Assist engineer to perform process characterization studies
• Install and maintain plating chemistry and equipment
• Manage lab and responsible for chemical & equipment spare parts procurement
• Provide technical support to other departments
• Support sales on their in-house study to support customer requirement
• Support customer qualification and set up of analysis
• Able to support equipment and analysis troubleshooting at customer site.
• Comply to ISO defined procedure.

Requirement

• Qualifications: Diploma in Chemical Engineering or Chemical Process Technology.
• Willing to travel to customers’ office (local and overseas) for technical servicing and support.
• Proficient in Microsoft Office Application
• Proficient in Basic Chemical Analysis Methodology
• Knowledge of electro-chemistry / plating / corrosion
• Familiar with lab analysis.
• 3-5 years of experience in Semiconductor Wafer Processing industries.

https://wa.me/6596112291 (Kyra)

Voon Yih Boon Reg No: R2210672 | The Supreme HR Advisory Pte Ltd EA No: 14C7279

Title: Laboratory Technician (Semiconductor Wafer Processing)
Industry: Semiconductor Wafer Processing industries

Working hours : 9 am–5:45 pm
Working Days: Mon - Fri
Working location: Gul Ave, Singapore 629665
Salary: $3800 - $4000

DEPARTMENT : PRODUCT APPLICATION LAB
REPORTS TO : Technical Manager

About the company: A privately held, global company with a belief in innovation and employee empowerment. With over 1000 employees worldwide, a global supplier of specialty chemicals, custom finishing equipment, engineered powders, and analytical control systems to the electronic component, printed circuit board, semiconductor, industrial finishing and decorative industries.

Job Description

RESPONSIBILITIES

• Conduct plating chemical testing & analysis
• Conduct product functional performance testing & measurement
• Assist engineer to perform process characterization studies
• Install and maintain plating chemistry and equipment
• Manage lab and responsible for chemical & equipment spare parts procurement
• Provide technical support to other departments
• Support sales on their in-house study to support customer requirement
• Support customer qualification and set up of analysis
• Able to support equipment and analysis troubleshooting at customer site.
• Comply to ISO defined procedure.

Requirement

• Qualifications: Diploma in Chemical Engineering or Chemical Process Technology.
• Willing to travel to customers’ office (local and overseas) for technical servicing and support.
• Proficient in Microsoft Office Application
• Proficient in Basic Chemical Analysis Methodology
• Knowledge of electro-chemistry / plating / corrosion
• Familiar with lab analysis.
• 3-5 years of experience in Semiconductor Wafer Processing industries.

https://wa.me/6596112291 (Kyra)

Voon Yih Boon Reg No: R2210672 | The Supreme HR Advisory Pte Ltd EA No: 14C7279

ocation: Biopolis

Working hour: Mon-Fri, office hour

Salary: up to 2300

-Perfume compounding and material selection as per formulation.

-Updating compounding information in the Electronic Lab Notebook.

-Ensuring clean tools are used for weighing.

-Preparation for odor evaluations.

-Maintaining End-to-End (E2E) service of material management.

-Supporting the shipping of compounded materials with complete shipping documents.

Qualifications:

-Min. Diploma in Chemistry/Perfumery and Cosmetic Sciences/Chemical Engineering.

Has prior experience in a chemistry laboratory environment

Knowledge of good laboratory practices quality guidelines and regulations (cGMP).

Interested candidates, do submit your resume to [email protected] or telegram @alexgohhl

➖

Alex Goh Hock Leong

(CEI.No: R1763413 l Recruit Express Pte Ltd (Healthcare & Life Science) | 99C4599)

[email protected]

Singaporeans or PR ONLY

Experienced AV Technician and driver

Singapore class 3 (Manual) driver license and driving experience required

Job Highlights

===========

Full Time position.

Opportunity to upskill and learn new things. Career advancement

Opportunities to try out and be exposed to new technologies

Casual environment

Roles & Responsibilities include but not limited to:

======================================

- Follow arrangements and company standard procedure.

- Safely transporting audio visual equipment to specified locations in a timely manner.

- Assisting with the loading unloading packing and setup of TV and speakers.

- Ensuring that the company vehicle is always parked in areas that permit parking in order to avoid towing / fines.

- Ensuring safe driving at all times and not tail-gating vehicles in order to avoid accidents and damages to the delivery vehicle.

- Keeping the company vehicle clean and properly maintained by performing regular washing, cleaning and vehicle maintenance.

- Reporting any accidents and vehicle damage to management.

- Good working attitude and communication skills

- Able to work OT

- Setup TV

- Setup Speakers and other AV equipment

- Lay cables in a neat manner

General Requirements

==================

- Singaporeans or PR ONLY

- Experienced AV Technician and driver

- Singapore class 3 (Manual) driver license and driving experience required

- Highly responsible, punctual and good time management

- Attention to details and well organised

- Good team player with service-oriented mindset

- Experience setting up sound system, digital and analog audio mixer, LED video wall and other AV equipment will be ideal

- Work at height certification will be ideal

- Versatile, willing and flexible to take on broad spectrum of tasks and new tasks

- Adaptable to changes, stress and last minute requirements

- Positive, can do attitude

- Calm and level headed

- Good problem solver

Responsibilities

• Carry out final inspections
• Perform testing on incoming materials such as paint, lacquer, and steel for each batch
• Conduct in-process quality checks at least twice per day
• Calibrate measuring equipment in-house twice a year
• Maintain and manage process documentation and test reports
• Submit non-conformance reports on a daily basis
• Undertake drum performance testing according to UN standards
• Handle additional tasks as needed, including:First article inspections; Investigations into customer complaints; Testing of product packaging

Requirements

• Completion of G.C.E. 'O' level or an equivalent qualification
• Preferably, at least 2 years of experience in a manufacturing environment
• Candidate with industrial packaging background will be highly advantageous
• Proficient in basic computer operations
• Familiarity with statistical analysis is beneficial
• Understanding of ISO procedures is advantageous
• Thank you for your application and we regret that only shortlisted applicants will be notified

By submitting any application or resume to us, you will be deemed to have agreed & consented to us collecting, using, retaining & disclosing your personal information to prospective employers with the services provided by us.

EA (18C9514/R23118479)

Location: Jurong Nursing Home, Lakeside
Salary: Up to $4.3k
Hours: Mon-Fri, Office

Role:
Assist the Operations Manager in daily tasks, ensuring compliance with safety and regulatory standards, while training and mentoring staff.

Responsibilities:

• Oversee facility maintenance and inspections
• Manage contractors and report issues
• Handle contracts and budget monitoring
• Ensure fire safety and compliance
• Supervise operations assistants
• Support process improvements
• Respond to emergencies after hours

Qualifications:

• Bachelor of Science (Honours) in Facility Management
• No Need Experience , Training Provided

All qualified applicants, please click “ APPLY NOW”

Or you may send in your resume to:

Whatsapp: https://wa.me/+6597430026

Email : [email protected]

Kimmy Low Yi Ting (Kim) | CEI Registration Number: R23112122

Recruit Express Pte Ltd Company Reg. No. 199601303W | EA LICENCE Number: 99C4599

Job Description:

As an Aircraft Technician, you will perform maintenance, repair and overhaul of aircrafts in one of the following trades:

• Mechanical (B1)
• Avionics (B2)
• Sheetmetal
• Cabin

Requirements:

• Minimum 2 years of relevant experience
• Relevant educational qualifications in Engineering field
• Willing to work on shifts

Jobsite.com Pte Ltd

Reg No: R22108762 (Joelle Foo)

EA Licence No: 00C3461

Facilities Coordinator - Safe Permit & Operations

Work Dynamics - Integrated Facilities Management

Leading Global Technology company

DUTIES & RESPONSIBILITIES

The FC must be able to offer assistance to all staff at this site. The expression “Going above and beyond” is a normal operating standard for this position. The FC will perform any other tasks that may be assigned to them which is related but not exclusive to customer service, hospitality and experience, finance and admin, project coordination, the broad spectrum of facilities & building management and operations (hard and soft services, transport and waste management, etc), space planning, event management and any others that may fall within the scope mentioned.

Create and provide memorable and exceptional experience for all clients, internal and external, in the client office:

• Ensure messaging is consistent and in line with directions given by the Supervisor.
• Respond to client inquiries and concerns promptly and with courtesy and enthusiasm.
• Build relationships by engaging clients in authentic, personable conversations.
• Create WOW experiences by anticipating client needs and seizing the moment; acting on them before being requested.
• Provide a positive environment where things get done.
• Take ownership of customer issues and proactively seek to resolve them quickly.
• Provide end to end service; take responsibility and accountability.

Provide exceptional communication to clients:

• Communicate effectively and correctly.
• Respond, follow up and close – both via email and in person in a timely manner.
• Maintain current/up to date knowledge of the building and office procedures and client/guest-related information including, but not limited to:
• Information about the history of the office location, and the office design concept.
• Information on the facilities of the building, in the office, and of the general area.
• Vendor Management
• Emergency response procedure and incident reporting.

Safe Permit

• Manage the Safe Permit Portal: - Oversee and maintain the Safe Permit portal, ensuring smooth operations and user accessibility.
• Manage end-to-end Safe Permit Submission - Review submitted permit
• Handle the registration process for vendors
• Conduct Training:- Provide training sessions to external vendors and other stakeholders on Safe Permit procedures and protocols.
• Compliance: - Ensure adherence to Safe Permit protocols and EHS (Environmental, Health, and Safety) regulations.
• Familiar with risk assessment and method statements.

Patrol and check the office for cleanliness issues, safety (and security) hazards and document any irregularities:

• Be the eyes and ears of the EHSS and soft services/hard services/ operations team. Maintain the general presentation of the office by appropriately notifying departments/owners responsible for the maintenance, or to self-perform the remedy immediately, regardless whether it is a temporary or permanent solution, and where it is possible to do so without compromising on safety and standards.
• Report infractions immediately and according to procedure.
• Report and log data on unusual occurrences such as property damage, injuries, theft, etc and create detailed incident reports in a timely manner:
• Gather information in accordance with procedure and prepare incident reports within KPI or policy guidelines and free from errors.
• Provide back-up support and cover to absent team members. Provide emergency on-site attendance as needed:
• Carry out tasks relating to customer service, hospitality and experience, administration, the broad spectrum of facilities & building management and operations (hard and soft services, and waste management, etc), event management and any others that may fall within the scope mentioned.

Critical Competencies for Success:

Great attitude:

• Proactive and positive
• Gung-ho and can-do attitude
• Solution oriented

Client Focus & Relationship Management:

• Demonstrates proactive and professional approach to customer service and stakeholder engagement
• Able to interact with a wide range of client staff, including senior levels and support staff
• Able to manage conflict and balance between client and JLL requirements
• Has a customer service oriented attitude

Leadership, Collaboration and Team Worker:

• Able to effectively lead a group of people to meet objectives, and promote open, constructive and collaborative relationships at all levels
• Able to work collaboratively and be part of a team working towards meeting deliverables

Project Management & Organizational Skills:

• Excellent planning & organizational skills, ability to prioritize work and meet tight deadlines
• Proven ability to manage multiple operational matters on a daily basis

Providing onsite support:

• You will be the upper facilities management’s trusted right hand on all facilities-related activities.
• Perform routine site inspections to ensure all building processes and best practices are implemented and maintained.

Problem Solving & Strategic Thinking:

• Capacity to deal with ambiguity and solve problems effectively
• Analytical
• Able to employ holistic approaches and looks at long term solutions

Other Personal Characteristics:

• Strong communicator
• Good presentation skills and possesses strong verbal & written communication skills (English & local language).
• Skilled at using positive language
• An active listener
• Passion for quality
• Has an eye for detail to make sure the best delivery of services
• Self-motivated
• Confident and energetic
• Enthusiastic

Facilities Manager

Work Dynamics - Integrated Facilities Management

The Facilities Manager is responsible to assist the account in charge for the delivery and performance of FM contract deliverables for assigned sites. The role is the key point of contact with local client and key stakeholders across client sites for the areas of responsibility and its occupants, and act as their service provider liaison.

Facilities Management

• Establish a “Safety First” culture across sites and improve safety performance by championing our level of awareness and changing all staff and partner safety behaviours.
• Provide leadership and guidance to the team as required to ensure delivery and achieve of high client service standards.
• Provide formal supervision to employees. Monitor the training and development of staff. Conduct performance evaluations and coaching. Oversee the recruiting and hiring of new employees.
• Schedule and manage the team's daily activities
• Coordinate and manage facility repairs and maintenance by working with technicians, vendors and contractors.
• Maintain positive client relationships and conduct meetings on unresolved facility issues.
• Prepare and manage capital projects, operating budgets and variance reports.
• Perform facility inspections quality quality assurance following local regulations or standards. Suggest operational efficiencies, repairs, and upgrade opportunities.
• Ensure compliance by ensuring renewal of all related government and statutory licenses.
• Ensure audit programs are fully implemented and complied with for quality assurance purposes
• Liaise with Technical team to plan, assign and supervise planned and reactive activities utilizing Corrigo
• To check on site repair and maintenance carried out by subcontractors to ensure work completion, quality and method of working for compliance with specification and ordinance requirements
• Oversee vendor relationships and invoicing procedures. Review price quotes for the procurement of parts, services and labor for O&M related works/projects
• Identify, troubleshoot, and resolve day-to-day and moderately complex issues which may or may not be evident in existing systems and processes.
• Develops and maintains a proactive relationship with internal and external customers and understand business needs of local customer
• Achieve Key Performance Indictors and Service Level Agreement targets
• Participate in emergency evacuation procedures including crisis management and business continuity.
• Conduct regular site inspections to ensure high standards are maintained
• To perform additional tasks as required by account in charge

Resources Management

• Cascade account objectives to the team into our JLL team’s Performance measuring system (Workday)
• Maintain an effective succession plan for yourself and all team members.
• Manage and engage in the on-going performance review process for all direct reports by required due dates.
• Arrange reliever support for required roles within the account

Vendor Management

• Monitor, measure and report upon the performance of all specialist vendors in terms of their ability to carry out the work against the agreed contractual budget
• Co-ordinate meetings periodically with contractors to ensure that required standards are established and maintained, and develop corrective action plans when, or if performance falls below expectations
• Program the attendance of specialist subcontractors at site ensuring strict adherence to client and JLL processes and procedure including Permit to Work, Method Statement and Risk Assessment.
• Work with supply chain to ensure the selection, procurement and management of specialist vendors

Financial Management

• Effectively manage site operating expenses to meet the budget.
• Assist with the production of capital expenditure and operational expenditure plans
• Ensure all financial processes are following and compliant as per JLL and clients’ competitive bids process, issuing of PO's, and receipting work.

Sound like you? To apply you will have:

Education & Qualification

• Bachelor's Degree preferred with 5 - 7 years of relevant experience. In lieu of a degree, a combination of experience and education will be considered. Facility Management certification preferred.
• Experience in the areas of staffing, training development, coaching, mentoring, measuring, appraising, and rewarding performance and retention preferred.
• Ability to guide the exchange of sensitive, complicated, expectations and handle problems.
• Leadership skills to motivate team impact on quality, efficiency, and effectiveness of the job discipline and department
• Extensive organizational skills with a strong inquisitive mindset
• Experiences in account operations and management.
• Knowledge in local statutory requirements

Skills

• Pleasant personality, strong customer service, interpersonal skills and problem solving ability.
• Good understanding of facilities operations / housekeeping management
• Computer skills in Microsoft Office, PowerPoint, Excel
• Independent, self-motivated, flexible, responsible and willing to work under pressure.
• Knowledge of standard business and accounting practices.
• Knowledge of Excel and ability to analyse data.

What you can expect from us

We’re an entrepreneurial, inclusive culture. We succeed together - across the desk and around the globe. We believe the best inspire the best, so we invest in supporting each other, learning together and celebrating our success.

Our Total Rewards program reflects our commitment to helping you achieve your ambitions in career, recognition, well-being, benefits and pay. We’ll offer you a competitive salary and benefits package.

With us, you’ll develop your strengths and enjoy a career full of varied experiences. We can’t wait to see where your ambitions take you at JLL.

Job responsibilities:

• Report to, and provide support to the Lead/ Senior Instrumentation Engineer on assigned projects and report to the Head - Instrumentation Engineering at the basis level.
• Be familiar with and implement Company work processes, procedures and quality policy as appropriate on assigned areas of projects.
• Be aware of Company contractual requirements and Scope Boundaries
• Responsible for work assigned by the Lead / Senior Engineers through project lifecycle phases and for compliance to project specific performance, integrity, quality and HSE requirements relevant to his/ her assigned scope of work. Specific duties could include:
• Prepare requisitions, specifications and datasheets as assigned.
• Evaluate vendor offers and prepare Technical Bid Evaluation Report for assigned packages.
• Populate Instrument database such as SPI/Aveva Instrumentation.
• Prepare and Issue documents such as Instrument Index, Hazardous Are registers etc
• Provide inputs to designers to develop design/drafting deliverables such as cable block diagrams, wiring diagrams, Layouts and review these deliverables
• Assist in preparation of control system deliverables such as I/O lists, Control narratives, Cause and Effect Matrix etc.
• Review and provide technical inputs on Instrumentation Engineering related technical matters to interfacing disciplines
• Review and provide technical inputs to equipment/ package related technical matters
• Be responsible for and manage the Instrumentation Engineering technical interfaces with equipment and package suppliers, in coordination with the Lead/ Senior Instrumentation Engineer, for assigned areas to ensure that the equipment and packages comply with the technical requirements & specifications of and to monitor the compliance to Client’s Basis of Design, Standards & Project Specifications.
• Continuously seek to improve discipline working methods, tools and procedures and contribute actively to “Discipline Development” and “Experience Transfer”.

Work experience requirements:

• Minimum of 3 years of work experience in instrumentation engineering activities such as preparation of data sheets, specifications, Technical Bid Evaluation reports etc in a reputed engineering consultancy.
• Applicants with less than 5 years of relevant Instrumentation Engineering experience may be considered for junior positions.

Qualifications:

• Bachelor’s Degree in Instrumentation/Electrical/Chemical Engineering with relevant work experience as per above.

Other skills:

• A self-starter who can work independently, make sound decisions, analyse problems and provide focused solutions.
• Good understanding and knowledge of oil and natural gas industry standards such as, but not limited to, API (American Petroleum Institute), ISO (International Organisation for Standardisation),IEC, NORSOK, EU Directives ATEx, IECex requirements and other relevant standards related to Instrumentation Engineering.
• Effective verbal and written communication skills in English
• Experience in engineering of Oil and Gas offshore projects would be an advantage.
• Experience in SPI/Aveva Instrumentation would be an advantage.
• Applicant shall have strong computer literacy in commonly used business software applications such MS Word, MS excel, Teams etc.
  
  We regret that only shortlisted candidates will be notified.

Details:

Up to $4,500

Duties:

• Hands-on role with a diverse range of responsibilities, from fixing office lighting and power issues to maintaining raised floors and plumbing.
• Opportunity to work closely with our team and support their needs, such as adjusting air conditioning or rearranging furniture for events.

Requirements:

• Proficient in troubleshooting and repairing a variety of office equipment and infrastructure, including lighting, electrical systems, and plumbing.
• Comfortable working in a fast-paced, dynamic environment and responding promptly to employee requests.
• Ability to work independently as well as collaboratively with the wider team to ensure a seamless and efficient work environment.
• Strong attention to detail and a commitment to maintaining high standards of cleanliness and organization.
• Willingness to work flexible hours, including Saturdays, to support the company's operational needs.

Interested Applicants, please click Apply Now.

Chow Zi Qing

R2199258

Revup Proservices Pte Ltd

EA.24C2366

Building Technician
Working Days: 6 days
Working Timing: Shift, based on duty roster
Working Location: Islandwide, based on project available or mobile team
Starting Salary: $1800 to $3000 + OT

Responsibilities & Duties

1. Coordinate and assist in the daily operation of the M&E services, such as carrying out all planned maintenance schedules and periodic inspection, and up-keep of the common area.

2. To perform weekly checks on the estate’s M&E system, including minor troubleshooting on failure of systems.

3. To carry out minor troubleshooting on any failure on the M&E systems.

4. To maintain a proper stock control for all mechanical/electrical accessories and materials purchase.

5. To respond to ad-hoc complaints received from the Management office from time to time.

6. To respond and attend to all emergency calls, and for reinforcement of manpower during minor breakdown of M&E equipment within the estate’s common area.

7. To ensure that service contractors conduct the servicing properly and in accordance with the service contract.

8. To follow external contractors that are at site to carry out routine servicing.

9. To attend to any other job function on M&E related issues that may be assigned from time to time.

10. To carry out minor items of repair, such as repair of fixtures/fittings and touch up painting.

Chew Xing Shan Reg No: R22107044

The Supreme HR Advisory Pte Ltd EA No: 14C7279

WhatsApp: +65 83592812 [Shannon]

Purpose of Job: Black Box Network Services, the global leader in communication system integration, is looking for Data Center Technician with a proven track record in: 

Racking and stacking of network devices 

Cable patching 

Physical layer troubleshooting 

Equipment disposal activities 

Hardware break fix support 

Installing and troubleshooting enterprise equipment 

Inventory Management / DCIM 

OSI /TCP/IP Model 

IP address 

Mac address 

ARP 

Ping, trace commands 

Console 

Patch Cords (Types) 

Routing protocols (plus) 

This position will support facilities management, site security and project engagement with a commitment and desire to satisfy our client by completing all work at the highest level, always striving for perfection.

The candidate must be motivated and self-driven for success.

The candidate must have basic Networking knowledge.

Primary Roles & Responsibilities 

The patching cabling between network equipment and client’s network 

The installation of power cables from equipment to power supply in rack/cabinet/closet Job Description 

The installation, troubleshooting and de-installing IT equipment (Servers / Network / Storage / etc)

Install/swap out devices (e.g., phone, computers, cables, boards, edge routers, switches and etc.) 

Complete all hard and complex Move, Add Change (MAC) requests within the defined service levels 

Act as interface between client’s associates and management 

Provide hardware break-fix services for network infrastructure 

Perform onsite call-through, data, voice, website and security testing 

Perform back-up testing to ensure all systems are connected to the client’s network as directed 

Support carrier testing of circuits 

Assist with facilities efforts such as vendor co-ordination and vendor supervision

Power and uninterruptable power supply (UPS) restoral

Water problems,

Emergency cooling restoration,

Fire suppression exercises, restoration, and post fire events 

Support inventory management activities

Receiving inventory o Tagging of assets

Tracking spares (crash kits)

Ordering inventory

Updating inventory records

Prepare and return damaged equipment 

Act as an interface, as needed, between associates at the applicable location and centralized project / operations / MAC management

Requirements: Must be proficient in utilizing technical tools such as BERT testers, cable testers, and fiber testers. 

Requires experience in working in communications closets

Must be able to perform rack and stack activities 

Must be able to safely lift heavy objects

Must understand cable patching processes and procedures in copper and fiber Experience in either or both CommScope and Corning structured cables (copper and fiber)

Must have a basic knowledge of data communications networking. 

Must be able to assist in troubleshooting issues 

Must understand network terminology 

Requires good interpersonal communications skills

Must be able to explain technical issues in a way the client will understand an issue

Must be able to interpret a client’s issue in a way that will allow technician to facilitate a resolution Education/Experience Requirements 

5+ years of experience in Data Centre operations and environment 

Must have a basic knowledge of local and wide area networking. 

High school Diploma or equivalent required

No Supervisory responsibilities

Singaporeans or PR ONLY

Experienced AV Technician and driver

Singapore class 3 (Manual) driver license and driving experience required

Job Highlights

===========

Full Time position.

Opportunity to upskill and learn new things. Career advancement

Opportunities to try out and be exposed to new technologies

Casual environment

Roles & Responsibilities include but not limited to:

======================================

- Follow arrangements and company standard procedure.

- Safely transporting audio visual equipment to specified locations in a timely manner.

- Assisting with the loading unloading packing and setup of TV and speakers.

- Ensuring that the company vehicle is always parked in areas that permit parking in order to avoid towing / fines.

- Ensuring safe driving at all times and not tail-gating vehicles in order to avoid accidents and damages to the delivery vehicle.

- Keeping the company vehicle clean and properly maintained by performing regular washing, cleaning and vehicle maintenance.

- Reporting any accidents and vehicle damage to management.

- Good working attitude and communication skills

- Able to work OT

- Setup TV

- Setup Speakers and other AV equipment

- Lay cables in a neat manner

General Requirements

==================

- Singaporeans or PR ONLY

- Experienced AV Technician and driver

- Singapore class 3 (Manual) driver license and driving experience required

- Highly responsible, punctual and good time management

- Attention to details and well organised

- Good team player with service-oriented mindset

- Experience setting up sound system, digital and analog audio mixer, LED video wall and other AV equipment will be ideal

- Work at height certification will be ideal

- Versatile, willing and flexible to take on broad spectrum of tasks and new tasks

- Adaptable to changes, stress and last minute requirements

- Positive, can do attitude

- Calm and level headed

- Good problem solver

Primary Function:

To perform NDT inspection in Rolls-Royce Seletar premises in an efficient and effective manner.

Duties and Responsibilities:

• Identify surface or very near surface discontinuities in a weld or critical area of engine component using Eddy Current and Ultrasonic Inspection.
• Use Portable handheld scanning technique to detect surface and subsurface defects.
• Perform FPI and inspect under UV light for flaws open to the surface such as cracks, laps, etc.
• Perform Binocular Inspection which is capable of viewing up to 40X magnification.
• Monitor the usage and performed calibration on NDT equipment and measuring instrumentation.
• Ensure all tasks achieve agreed quality standards and deadlines in line with customer OEM and Company requirements.
• Work within NDT team to achieve optimum levels of performance, being particularly aware of On-Time Delivery.
• Ensure that processes and procedures are followed to ensure all tasks are performed efficiently and to the required quality standards.
• Comply with all safety procedures and legislation associated with NDT and aeronautical product.

Requirements:

• Minimum Diploma holder and equivalent
• Minimum of 3 years aviation NDT experience.
• Solid experience in Ultrasonic and Eddy Current Inspection (must have completed all necessary practical hours).
• Possess good analytical skills.
• Proficient in using Microsoft office tools.
• Be detail-oriented.
• Be able to use wide range of tools and instruments.
• Have a good eyesight and color vision.
• Available to work on flexible working hours.

Benefits:

• Performance Bonuses and Incentives
• Opportunities for professional development and career advancement
• Collaborative and inclusive company culture

Responsibilities:

• Oversee and coordinate the maintenance activities of the team, including preventive, predictive, and corrective maintenance
• Develop and implement maintenance strategies and procedures to optimise equipment performance and minimise downtime
• Monitor and analyse maintenance data to identify trends and opportunities for improvement
• Provide technical guidance and support to the maintenance team, ensuring they have the necessary skills and resources to perform their duties effectively
• Collaborate with other departments, such as production and engineering, to ensure a coordinated and integrated approach to maintenance
• Ensure compliance with all relevant health, safety, and environmental regulations
• Participate in the development and implementation of continuous improvement initiatives
• Manage and mentor the maintenance team, fostering a culture of continuous learning and development

Requirements:

• Minimum 5 years of experience in a maintenance supervisory or team lead role, preferably in the chemical processing industry
• Strong technical knowledge of industrial equipment, maintenance best practices and troubleshooting techniques
• Excellent problem-solving, critical thinking, and decision-making skills
• Proven experience in leading and motivating a team of maintenance technicians
• Effective communication and interpersonal skills, with the ability to liaise with stakeholders at all levels
• Fire Safety Manager certification will be added advantage.

Interested candidates who wish to apply for the advertised position, please click on the APPLY button below to send in your resume or send to [email protected]

EA License No: 13C6305

Reg. No.: R1985234

For candidate who applied for the advertised position is deemed to have consented to us that we may collect, use or disclose your personal information for purpose in connection with the services provided by us.

• MNC Company
• Basic $4000 - $5000 + AWS + Variable Bonus
• Excellent Welfare and Benefits + Career progression
• Working days: Monday to Friday
• Working hours: 8am to 4.30pm
• Jurong Island. Company Transport provided

Job Responsibilities:

• To coordinate Maintenance Activities between Production and Technical department
• Support GCM/SDM MA & MO activities. Support work permit and authorization activities
• Participate in Daily operation and maintenance meetings to support both operation and maintenance activities by keeping status updated with plan
• Coordinates all maintenance activities including safe permit issuance, lockout-tagout preparation, GSAP approval, and supporting relevant parties to effectively complete the maintenance works as needed
• Actively prepare equipment from maintenance phase to commissioning of equipment to ensure the completed jobs function well
• Supports Capital Project/MOC activities in view of blanking, isolation, LOTO and flushing plans are followed to ensure safe handling
• Work closely with the Maintenance engineers on Transition and Turn Around activities from planning stage to commissioning stage
• Prepare markup PIDs covering all the GCM activities to be completed during the transition period for safe and timely start-up
• Coordinate with shift team supervisors to ensure maintenance jobs such as cleaning, washing and technical or in-house contractors follow up jobs are completed before handing over to production
• Support work permitting and work authorization activities
• To perform any other duties or assignments as assigned by superiors

Requirements:

• Diploma/ Degree in relevant field
• Minimum 2-3 years of experience in maintenance planning and coordination

Candidates are encouraged to apply this position via Apply Now button with the following information in the resume

• Work experiences and job responsibilities
• Current and Expected salary
• Reason for leaving
• Date of availability
• Education background

We regret that only shortlisted candidates will be contacted.

THIEN CHING MEI (R2198032)

EA Recruitment Pte Ltd

EA License No: 21C0492

Maintenance Leader (Manufacturing plant maintenance, Lakeside)

• Salary: Up to S$6,500 + AWS + VB

• Work Location: Western of Singapore (2-way company transport provided from Lakeside MRT)

Requirements

• Diploma or Bachelor in Mechanical Engineering or related engineering field.

• 3 years or above working experience at Process Plant, process good problem solving skills, troubleshooting, maintenance skills.

• Proficient in English, with excellent communication skills to effectively collaborate with a diverse team.

If you are interested in this opportunity, submit your application now (with your salary details and notice period) to [email protected] find out more about this position. Thank you.

Chen Hsiu Wen (Winnie) | Personal Reg No: R1980765
Manpower Staffing Services (S) Pte Ltd | EA License No: 02C3423

Responsibilities

• Manage and monitor all FM related systems to ensure highest level of system availability
• Providing level 2 support and works with vendors to ensure timely resolution of incidents / issues
• Derive and maintain up to date technical documentation, work instructions and procedure
• Involved in project-based work for new implementation or improvement to existing system
• Supporting DCIM (Data Centre Infrastructure Management) system, to be able to maintain the collection of the data from various location for central monitoring at IoC.
• Support of CCTV system from all locations with linkage to central view at IoC
• Managing Smart Facility System.
• Access Control, i.e. card access, Facial recognition.
• Manage Electronic Key Management System
• Updating the Smart Facility Access list
• Any other ad-hoc duties as assigned by superior from time to time.

Role Requirements:

• Degree in IT or related field with minimum 2 years of experience in network facilities management or Data Centre facility management
• Possess understanding of Facility management but without relevant experience but willingness to learn is welcome
• Skilled in physical security management and systems
• Strong problem-solving skills, critical thinking, excellent analytical ability
• Ability to communicate both verbally and in writing in a clear and concise manner.
• Work well under pressure with differing levels of people
• Ability to maintain confidential information and communications.
• Ability to plan and organize ones work in-order to meet target set
• Results focused and understands critically the needs of meeting customer SLA and KPI requirements.
• Fresh graduates are welcome to apply

Service Technician(Commercial Kitchen Equipment)

Working days: 5.5days

Working Hours: Mon-Fri 8am - 5pm, Sat 8am -12pm

Working Location: Defu Lane 10 (Hougang)

Salary: Basic $2300 - $3000 + OT (When require)

Job Description:

• Install, service, and repair commercial kitchen equipment.
• Perform routine maintenance and inspections to ensure equipment operates efficiently and safely.
• Diagnose mechanical and electrical issues and implement effective solutions.
• Perform testing and inspection on finished goods for quality issues and perform corrective actions.
• Provide assistance and technical service requests to and by project clients.
• Other duties as assigned by management.

Tee Xin Li Reg No: R24121619

The Supreme Hr Advisory Pte Ltd EA No: 14C7279

Service Technician

• $2500 - $3300 + $60 handphone allowance
• Senoko
• Working hours: Mon - Fri 8am – 5pm, Sat 8am – 12pm

Requirements:

• Candidate must possess at least a NITEC, Professional Certificate in ( Electrical / Electronic / Mechanical) or equivalent.
• Must have basic Electrical/ Mechanical and Electronic background.
• Must have class 3 driving license
• Able to start work immediately or short notice.

Job Responsibilities:

• Servicing, installation, testing and troubleshooting of electrical and mechanical parts at clients' premises or workshop.
• Access control, able to work under minimal supervision.
• Experience in Security System is a plus.

Tan Jia Jun | REG No: R23112681
The Supreme HR Advisory Pte Ltd | EA No: 14C7279