• Ensure to know project scope of works and meet the clients needs as per project standard and requirements.
• Supervise and oversee the sequential activities of Structural, Piping & Mechanical Equipment (SMP) Installation such as Receiving, Locating in the lay down, Preservation,Foundation and Structure, Receiving from Main Contractor/Suppliers/Vendors,Pipe Support Installation, Launching, Fitting and Welding of piping, Flange Alignment, Punch Clearing, Reinstatement,Touch up Painting and Hand Over.
• Must have working knowledge of all applicable piping and structure standards and recommended practices, e.g. BS, ASME,ASTM,CSA,API etc.
• Managing project scope and change control with commerical or without commercial impact.
• Development of procedures, flowchart or process flow, detailed calculation based on available Engineering information.
• To procure and requisition materials based on interpret construction and technical drawings.
• Communicate with Engineering/technical/quality requirement to team individuals.
• Project Coordinate with Clients, PMD, Procurement, Engineering, Contract & Finance Departments & Subcontractors and interfaces with other REL' s Business Units.
• Working closely with main contractor and client to ensure the project meets the required needs.
• Resolve any unexpected technical difficulties for SMP scope and other problems that may arise at any time.
• Oversee the Steel Structural Works, Piping and Mechanical while assist and communicate for any prioritise from Pre-Fabrication required (e.g PTREI and Subcontractors)
• Preparation of method of statement, risk assessments for Piping, Mechanical & Steel Structure Scopes.
• Monitoring and installation supervision with subordinates to deliver the projects in Safety, Quality and Production manners.
• To liaise with clients representative on all project issues and subcontractors to ensure safe and efficient delivery of projects to both the company and clients satisfaction.
• Leading the supervisors and foremen in finding and executing solutions to SMP related problems on site.
• Communicating with Project Management Team / QAQC Team to validate and document all changes and highlight to PM for changes that shall involve additional works.
• Assist with the management of internal and external third party interfaces.

Requirements

• Diploma or Degree in Electrical and Instrumentation
• Min 3 to 5 years work experience as Electrical Project Engineer in Oil and Petrochemical Construction Industry
• Experience in project co-ordination with client, engineering and procurement departments
• Experience in co-ordinating with site construction team for installation, testing and commissioning works
• Preferably with overseas experience
• *FRESH GRADUATES ENCOURAGE TO APPLY*

Job Description

• Industry/ Organization Type: Internal Telephone Wiring for Telecommunications
• Position Title: Cabling Technicians x 5 pax
• Working Location: West – Jurong East
• Working Hours: 5.5 days (Mon-Fri: 9 am-6 pm, Sat: 9 am-2 pm)
• Salary Package: Gross Salary up to SGD 2500 (Basic SGD 1250 + OT)
• Duration: Permanent

Key Responsibilities

• Install, repair, test & commission cable systems (fibre optics)
• Performs termination and testing of new cabling
• Prepare / Install cable pathways & supports
• Assist in the preparation of tools & materials used for daily work assignments
• Troubleshoot cabling system issues & perform repairs & maintenance

APPLY NOW!!!

• Min. O level or possess welding cert
• Require to climb
• Comfortable to travel to different sites for work
• Training provided to an inexperienced candidate

Please apply through ANY of the following methods:

• Submit your application by clicking the APPLY button;
• Email your resume to Job(at)anradus.com.sg. Please indicate #65856 on the email subject.

Anradus Application Policy: We value each application and ensure every resume is reviewed. Our process is efficient, typically concluding within 3 working days. If you do not receive communication from us within this timeframe, it's likely that your application has not been shortlisted by our client. In such cases, we recommend continuing your job search to maximize your opportunities.

Anradus Pte Ltd | EA License No. 20C0161 | Celine Tan | EA Reg No.: R1873694

Our client is a Global MNC company in the Pharmaceuticals industry. Due to their current expansion plan, they are looking for a Production Technician to join their Production team, in hopes of developing the current high performing team. They are located in the West – easily accessible.

Note: This is a 1-year contract position, convertible.

Responsibilities:

• Responsible for overseeing/operating the company’s systems and equipment to meet the production requirements, ensuring adherence to the site’s safety standards and regulations
• Manage the necessary production materials, as well as other tasks such as cleaning and sterilization
• Handle the daily operations of the assigned manufacturing equipment
• Oversee strict compliance with the company’s HSE regulations, ensuring quality is being upheld
• Follow the company’s various SOP for proper material storage, as well as disposal of degraded/contaminated materials
• Record/Maintain data into the company’s inventory management system
• Execute the necessary cleaning and sterilization procedures when required
• Conducts calibration/pre-startup checks on the necessary equipment while following the company’s SOPs
• All other adhoc duties as assigned

Requirements:

• Minimum Nitec/Diploma in any relevant fields of Engineering
• Minimum 1 year of relevant working experience

Interested candidates who wish to apply for the advertised position, please click APPLY NOW or email an updated copy of your resume/cv.

We regret that only shortlisted candidate will be notified.

RecruitPedia Pte Ltd

EA License No: 19C9682

EA Personnel No: R22104689 (Lim Yu Xun, Acer)

• MNC, attractive remuneration package
• Salary up to $8000, AWS, bonuses, Dental, medical
• Leadership skills
  North-East, 5 days work week
• Career advancement

Job responsibilities:

• Provide on-site product & system commissioning/servicing support.
• Support on product and application presentation to new and existing customers.
• Project/systems configuration and coordination, new product launch.
• Assist in distribution channels-technical related.
• Brain storming of ideas to support on special projects.
• Providing technical support to sales team.
• Handling complaints on technical issues and support marketing activities.

Requirements:

• Possess a Degree or Diploma in Engineering (with relevant experience).
• Knowledge of water treatment, hygienic and steam, food and beverage, pharmaceutical, semi-conductor industries is an added advantage.
• Minimum 8 to 10 years’ experience in Industrial/Technical products, particularly valves, sensors and process control instrument.
• Strong leadership skills and able to lead a team.
• A hands-on person.
• Able to communicate with customers on building solutions.
• Strong communication skills, Dynamic and goal-oriented, team player.
• Computer and PLC literate, proficient in MS Excel, Word, Powerpoint
• Knowledge of Adobe Photoshop/InDesign will be an added advantage.

Interested applicants, please send your resume to [email protected]

MOM License 16C7883 | Reg No. R1109186

Roles & Responsibilities

We are seeking a highly skilled and motivated Hotel Maintenance Technician to join our team and ensure the smooth functioning of our factory properties. You will play a crucial role in maintaining the factory's facilities to the highest standards and ensuring the safety and comfort.

Job Description

• Perform repairs & general maintenance work on various systems, including (but not limited to) M&E, plumbing & sanitary, air-conditioning, electrical/lighting, painting, and carpentry.
• Troubleshoot issues and implement effective solutions.
• Ensure compliance with building and fire safety regulations.
• Follow established maintenance strategies and company policies for a safe environment.
• Coordinate with other departments for smooth operations.
• Communicate effectively with supervisors and colleagues regarding maintenance status and issues.

Qualifications and Skills:

• 1 to 2 years of relevant working experiences in facilities & building maintenance.
• ITE NITEC / Higher NITEC / GCE 'N' / 'O' Level / Diploma
• Preferably to have hospitality and F&B background
• A team player and the ability to work during weekends and on public holidays.

Our client is a leading provider of innovative, high-quality vaccination and medication solutions and services . Currently, they are sourcing for a Process Technician to work closely with maintenance and operations to ensure the continuous high-quality performance of the Automated Forming Cell (AFC).

Working Hours : Monday - Friday, 8am-5pm, will be required to rotate shifts after April 2024

Working location : Joo Koon

Job Responsibility:

• Monitor, adjust and attend to several Auto Forming Cells (AFC) simultaneously.
• Operate and properly line clear a Dispersion Enhancement System (DES gear pump), Molding Press, Robotic Arm, Trim Press Rinser, and Packing Station.
• Run basic lines of code on the control unit of the robot in the case of an unexpected incident/shutdown of the cell or to teach a new robot position.
• Identify quality issues and understands the basic troubleshooting procedure to correct each common defect and common alarms.
• Work closely with maintenance and operations to ensure the continuous high-quality performance of the Auto Forming Cells.
• Performs all daily, monthly, or yearly cleaning and upkeep of the AFC.
• Any other duties assigned.

Job Requirements:

• Diploma in Robotics & Automation, Mechatronics, or other related engineering field)
• Minimal 3 years of automation manufacturing experience with cGMP knowledge/awareness in pharmaceutical industry or other related industry,
• Strong mechanical aptitude. (e.g., experience in autonomous maintenance, automation lines)
• Ability to work in a team.
• Intermediate English proficiency level
• Extensive knowledge of rubber manufacturing/automation equipment preferred
• Able to exert up to 50lb/22kg of force occasionally and/or up to 20lbs/9kg of force frequently, and/or up to 10lbs/4kgs of force constantly to move objects.
• Capable of controlling the automated equipment.
• Good communication, interpersonal and organizational skills.

Interested candidates, who wish to apply for the the above position, please click the “Apply now” below and send in your resume to Audrey_Cheah @persolkelly.com

We regret that only shortlisted candidates will be notified.

PERSOLKELLY Singapore Pte Ltd

EA License No: 01C4394

EA Personnel No: R23117933

EA Personnel Name: AUDREY CHEAH KAI LI

By sending us your personal data and curriculum vitae (CV), you are deemed to consent to PERSOLKELLY Singapore Pte Ltd and its affiliates to collect, use and disclose your personal data for the purposes set out in the Privacy Policy available at https://www.persolkelly.com.sg/policies. You acknowledge that you have read, understood, and agree with the Privacy Policy.

Job Description

Role : Technician (Semiconductor)

Location: Kallang ,Singapore

Duration: Permanent

Description of Services:

We are looking for a technician to render test engineering activities support.

· Diploma in Electrical / Electronics / Mechatronics

· Preferably 6 months- 1 year relevant experience in semiconductor industry

· 1-2 years’ experience in Semi-conductor test manufacturing environment will be advantage

· Experience in operating Tester and Prober e.g. loading test programs, performs datalogging

· Able to operate Test Handler and performs simple trouble-shooting

· Working experience on Final Test equipment would be advantageous

Deliverables and Results:

Support Engineers’ request for test requirement

ROLES AND RESPONSIBILITIES

Report to the Project Manager, HSE Officer (if any) or HSE Lead Coordinator at site and to Corporate HSE Manager at HQ.

• To have and maintain good daily attendance and punctuality.
• To notify PM / Corporate HSE at least two days in advance before going on leave for less than three days. In case of three or more days of leave, then to notify at least one week in advance.
• Familiarise with Rotary IMS procedure as well as Project HSE plan and lead the HSE team to implement the same at site with expected outcome.
• Assist the project manager to do effective implementation of HSE plan at Site Aware of basic HSE legal requirement, Rotary and client HSE requirements as well as communicate to the project team with their site work activities To do planning with HSE activities corresponding to construction stages and in accordance with HSE plan.
• Communicate the planned activities to all the project members for effective implementation.
• Involve in conduct and review of Method Statement, Risk Assessment or Job Safety Analysis. Assist the project team in implementation of Risk Control Measures at Site.
• Monitor work activities in order to advice management of HSE deficiencies and of HSE implementation program or performance.
• Participate in daily / Mass Toolbox Meeting and brief the workforce with necessary HSE matters as per the construction stages / sequences.
• Do proper reporting to HSE lead as well as Project Manager and to do documentation for all HSE activities in accordance with HSE plan as well as IMS procedure.
• Ensure that all the necessary teams like Emergency Response Team, Rescue Team, Lifting Team, First-Aider, etc., at project Site.
• Assist the project manager and HSE Lead in developing and delivering training programmes as per the pre-planned schedule Assist in develop and implementation of necessary plans like Lifting Plan, Fall Preventation Plan, Fatigue management plan, etc.,
• Deliver other duties/work scope as assigned by HSE Officer/ HSE Lead/Project Manager and Corporate HSE Manager.
• Ensure proper HSE communication and coordination among the project teams by necessary briefings and meetings. Participate in weekly meetings and input HSE with necessary minutes.
• Directs the issuance of Notices of Non-Compliance to contractor/subcontractors found in violation of the HSE rules & regulations. Follows-up to ensure compliance Assist in incident preventation as well as facilitate investigation by the team and reporting in case of any incidents at Site.
• Ensure proper communication to all the relevant parties as well as Corporate HSE on incidents as per the Rotary HSE Manual.
• Do regular HSE Inspections & rectify any unsafe practices and conditions at the worksite. Identify preventive measures and recommend to the project management. HSE findings to be addressed with necessary root cause analysis and to recommend preventive measures to the project team with necessary follow up.
• At-least one finding with necessary preventive measures to propose to HSE lead per day Stop any unsafe work or condition if there is any imminent danger to human life or potential major incident / emergency.
• Conduct / facilitate all the standardised HSE inspection including but ot limited to monthly Full Body harness check, Fire extinguisher inspection, monthly colour code check etc.,
• Ensure project Site machinery / equipment maintenance regime with necessary inspections and service records as well as safety provisions.
• Ensure that all lifting gears, appliances, electrical equipment are inspected monthly and that the register, colour coding and records are up to date Responsible & accountable to ensure that all site activities adhere to legal regulations, including Environmental regulations.

The jobscopes include:

1) Service of Airconditioner

2) Repair of Airconditioner

3) Good checking, trouble shootings skill in splits, and multisplit type aircon

4) Possess Class 3 License will be an added advanage

5) Have working experience in Agent (Manufacturer) will be added advantage

6) Good Team Player

Jobscope Includes:

1) Aircon Servicing

2) Aircon Troubleshooting, Diagnostic, and Repair

3) Class 3 license will be good

4) Have working experience in Agent (manufacturer) will be an added advantage

5) Have experience in checking Splits, Multi Split, VRF, VRV systems

6) Independent in work

7) Good team player

Who We Are

AETOS is a purpose driven organization – securing our future for our families, our communities and our clients. We are anchored on strong fundamentals and values by going fast, going together and going beyond. Our People are our key enablers and we are committed to investing in their personal and professional growth. While security is our core business, we are solving real challenges by leveraging technology and integrated solutions that unify safety, security, facilities management (FM), sustainability and much more.

What Make Us Unique

We stand out by how we value our people – through learning and development. Our organization is built on a culture of ownership, an environment of trust and a commitment to go the extra mile for our clients. We are firm believers that success is never achieved alone but through collaboration, teamwork and a common purpose.

Responsibilities:

Building Operations

• Conduct regular building inspections, preventive maintenance of building facilities including electrical, air-conditioning, plumbing and sanitary, fire protection system, AV system and to recommend appropriate rectification action to any fault or damages if needed.
• Setting up and operating of all AV equipment in time for services and events.
• Supervision of repair and improvement works by contractors
• To assist in event management.

Building Works & Maintenance

• attending to complaints/requests and coordinating necessary follow-up actions
• To supervise cleaning, landscaping, pest control, and other service contractors work.
• To carry out minor electrical maintenance (Replacement of light tubes & ballast, wall fan, water heater, switches)
• To carry out minor building repairs (Wall plastering, painting, wall & ceiling, carpark lines and direction arrow, patching of partition, basic cement works)
• To carry out carpentry works (Fabrication of boxes, shelves, trellis, wood panel)
• Perform ironmongery tasks which include replacing locksets for doors and cupboards, installing handles and hinges for windows and doors, and fitting door closers and stoppers.
• To carry out plumbing and sanitation repair works (Replacement of pipes, taps, valves, flushing system, and clearing of choked drainage for all AETOS sites)
• To assist on any shifting works involving office furniture, accommodation and stores.

Administrative

• Record electricity and water meter reading.
• Any other duties assigned by Facilities Manager.

Requirements:

• NITEC in Facility Management or a related discipline.
• 1-2 years of relevant experience in property/facilities management, with additional skills such as carpentry, plumbing, and electrical expertise, will be considered an added advantage.
• Occasional weekend work may be required.
• Strong emphasis on teamwork.

Summary

This role is to service and repair material handling equipment and provide good customer service to ensure customer satisfaction.

Job Description

• Analyse, diagnose and rectify issues on material handling equipment.

• Carry out electrical, electrical and hydraulic repairs on equipment and components.

• Perform scheduled preventive maintenances.

• Perform modification, commissioning works.

• Undertake Supervisor’s Instruction

• Perform stock take

• Provide support and guide new colleagues

• Attend trainings

Requirements

• Strong Electrical, mechanical, hydraulic knowledge

• Good computer skills

• Able to speak and write English for handling English speaking people

• Diploma in Electrical / Electronics / Mechatronics / Automotive

• At least 2 years’ experience in the technical field such as MHE, cranes, marine equipment, industrial vehicles.

Candidate must possess at least a Professional Certificate, Diploma/Advanced/Higher/Graduate Diploma in Engineering (Electrical/Electronic), Engineering (Industrial), Others or equivalent.

Required language(s): Preferably English and Mandarin spoken.

At least 6 Year(s) of working experience in the related field is required for this position.

Preferably specialist in Engineering - Electrical or equivalent.

Must have knowledge in Instruments and Electrical System for Process Control Environment

Knowledge and understanding of SCADA, DCS System, PLC, Instrumentation, Field Devices.

Job Scope:

1) Maintenance of Field Instruments for multiple Process Plants

2) Troubleshooting and problem solving for field Instruments

3) Calibration and commissioning of field Instruments

4) Electrical equipment troubleshooting and general maintenance for the process plant

Good Pay + Good Bonus ( 5 Days Work Week )

Junior / Entry Level / No experience / Senior Welcome apply / Full Training Provided

Responsibilities:

· To assist in the execution of RMCS asset replacement project and service contracts.

· To be involved in project FAT, migration and SAT supports.

· Supporting maintenance, software enhancement, bug fixes, testing during the maintenance phase to meet the contractual requirement and ensure smooth and proper execution of projects/contracts.

Requirements:

· Diploma/Degree in Electrical/Electronic/Computer/Software Engineering from a recognised Polytechnic/University

· Preferably have some working experiences in executing /maintaining of SCADA and Substation Automation System.

· Strong software skills.

· Knowledge of UNIX OS and C, C++, Java programming language.

• Good Pay + Good allowance + Good Bonus
• Salary for experience candidates will be considered based on the years of experience and our internal salary structure
  1 month AWS
  Variable Bonus ranging from 1 to 3 months depending on individual and company performance
• Working hours: 8.00 am to 5.00 pm / 8.30 to 5.30 pm / 9.00 am to 6.00 pm / 9.30 am to 6.30pm / 10.00am to 7.00pm
• Working days: Monday to Friday (1 day work from home per week)
• Annual Leave: 14 days up to 17 days for non-executive (Assistant Engineer and below)
• 18 days up to 21 days for executive (Engineer and above)
• Medical benefits of $500 per financial year (Benefit is extended to spouse and children (below 21 years old) of married employees)
• Insurance coverage: Hospital & Surgical (Benefit is extended to spouse and children (below 25 years old) of married male employees and child (below 25 years old) of married female employees)
• Term Life
• Personal Accident
• Maternity Insurance for female employee and spouse of male employee on the birth of their 1st 2 children claimable up to delivery bill of $6,000.00 whichever is lower.
• Flex Dollars of $500 per financial year
• Free annual year-end Health Check-Up
• Monthly Birthday Party Celebration
• Monthly Sports Activities
• New Born Gift
• CSR Initiatives
• Department Bonding Activities
• Biennial team building and staff appreciation dinner
• Gym Corner for employees to exercise
• Interested candidates please send an updated Resume / CV in Ms Word format to [email protected] or WhatsApp’s your resume to 98332779 ( no Calls)
  Consultant in-charge : Quah Li Lian (Lilian) ( Registration No: R1983286 )

Job Description

• Industry/ Organization Type: Manufacturing/Interior Design
• Position Title: CNC Technician/Operator
• Working Location: Changi South
• Working Hours: Monday – Friday, 8 am – 5 pm
• Salary Package: Up to $3,500 + Performance Bonus
• Duration: Permanent

Key Responsibilities

• Responsible for setting up, tool selection, operating multi-axis CNC machining, Fiber Laser Machining and inputting the programs as designed.
• Ensure that the CNC machine & Fiber Laser Machine operates in a safe, controlled environment.
• Responsible for loading and setting up.
• Perform basic preventive & corrective maintenance of the machine.
• Maintain specifications by observing drilling, grooving, and cutting, including turning, facing, knurling and thread chasing operations; taking measurements; detecting malfunctions; troubleshooting processes; adjusting and reprogramming controls; sharpening and replacing worn tools; adhering to quality assurance procedures and processes.
• Maintain equipment by completing preventive maintenance requirements; following manufacturer’s instructions; troubleshooting malfunctions; calling for repairs.
• Machine-related general tasks.

APPLY NOW!!!

• Minimum Nitec in Precision Engineering or related field.
• At least 4 years of related working experience.
• Computer literate, and familiar with WoodWOP, Pytha, Art- CAM, Jdpaint, Solidworks, AutoCAD.
• Knowledgeable in the operation of CNC Machines & Fiber Laser Machines.
• Familiarity with Homag CNC Machines is an added advantage.

Kindly apply through ANY of the following methods:

• Submit your application by clicking the APPLY button;
• Email your resume to Job(at)anradus.com.sg. Kindly indicate #65253 on the email subject.

Anradus Application Policy: We value each application and ensure every resume is reviewed. Our process is efficient, typically concluding within 3 working days. If you do not receive communication from us within this timeframe, it's likely that your application has not been shortlisted by our client. In such cases, we recommend continuing your job search to maximize your opportunities.

Anradus Pte Ltd | EA License No. 20C0161 | Norman Wee | EA Reg No.: R23115114

• Basic up To $3900
• Working Hours: Mon - Fri (9.00am - 5.00pm) But be prepared to come back during emergency
• location: Suntec/Capital Square
• Permenant Role + AWS + Variable Bonus (up to 1.5months)

Job Responsibilities:

• Assist managers in daily operations of Office Towers.
• Liaise with office tenant and to handle fit out and hand over of units.
• Investigate and follow up on defect rectification.
• Manage fitting-out for compliance with rules and safety.
• Coordinate with contractors/vendors for timely projects.
• Ensure contract and license renewals.
• Issue POs and verify contractor work.
• Manage online systems: occupant portal, access control, etc.

Job Requirements:

• Min. 2 year(s) related experience at Office Tower or Industry Office.
• Min. Diploma in Facilities Management and related fields

For consideration, kindly submit your CV or TEXT +65 9422 1220 for confidential discussion.

*Only shortlisted candidates would be notified*

MTC Consulting Pte Ltd | 15C7752

EA. Registration No.: R22111807 | Yap Teng Hui

Description

The QC Inspector is responsible for the quality levels of field works such as civil, tankage, piping, equipment, steel structures, electrical and instrumentation etc.

Responsibilities

• Interpret construction and technical drawings.
• Communicate engineering/technical/quality requirement to team individual.
• Verify that incoming materials meet the requirement
• Acts as an internal independent party for the verification of quality welds and ensure that incoming materials meet with specifications.
• Inspection at vendors shop facilities and work-sites, on fabricated pipes, steel structure, blasting, painting works, galvanizing or other installation works per ASME and ANSI codes, including verification of tests at their premises.
• Check for weld joint preparations, fit-up alignment, dimensional tolerances and visual check on weld.
• Liaise with NDT sub-contractors for radiography test, etc.
• View and interpret radiograph films before review by client inspectors.
• Follow-up on corrective action of non-conforming products.
• Prepare and compile inspection reports, non-conformance reports and other quality control.
• Monitor welders’ performance and the welding procedures to check for compliance.
• Witness and verify the welding procedures qualification tests and welders’ performance qualification tests.
• Implement and monitor proper storage, handling and usage of welding equipment and welding filter rods.

Requirements

• Diploma in Engineering or equivalent
• Minimum 2 years in Inspection and Quality Control for Oil and gas industry.
• Certified Welding Inspector preferably
• Experience in Inspection, Quality Control, testing and commissioning works of Construction for Power, Oil and Chemical Plants

Job Responsibilities:

• Install electrical appliances (mainly water purifier)
• Troubleshoot and identify solutions to on-site technical problems involving electrical and mechanical systems equipment
• Submit daily task reports and able to multitask
• Conduct basic user-training to customers and payment collection
• Coordinate with NCSC job scheduling work
• Any ad-hoc tasks that may be assigned as and when required

Job Requirements:

• Basic drilling and basic plumbing skill
• Work requires local travel
• Good communication skills
• Customer Service Oriented
• Must possess Class 3 driving license and own vehicle
• Knowledgeable in servicing home appliances will be an added advantage

Other Information:

• Salary: $3000 - $3500
• Job type: Permanent

Vault Personnel Pte Ltd

EA Licence No: 20C0275

Tan Li Yen

Registration Number: R23115268

Job Resposibilities:

· Perform routine tests/analysis on mechanical, physical, thermal and flammability testing and so forth.

· Prepare test specimen by injection and/or extrusion.

· Maintain systematic documentation practice in compliance with ISO requirements. Ensure accurate and timely update of test data and other documents.

· Support internal/external ISO audit activities.

· Ensure proper storage and management of retention samples and raw materials.

· Carry out safety and housekeeping activities in the lab.

· Ensure that all consumables are sufficient for daily operations.

· Any other duties as and when assigned by superior.

Job Requirements

· Diploma in Science or Engineering.

· Good team player and willing to collaborate with different stakeholders to achieve common goals.

· Basic laboratory knowledge and methodologies.

· Able to work under fast-paced environment.

· Ability to prioritize tasks based on urgency.

· No experience are welcomed to apply.

Responsibilities

• Perform troubleshooting and repair of equipment related failure to minimize downtime
• Schedule and perform periodic equipment preventive maintenance
• Work with Engineers to troubleshoot process related issues relating to equipment failure
• Perform housekeeping and conformance to safety and cleanroom protocols

Requirements

• Diploma / Higher Nitec / Nitec in Mechanical / Electrical / Electronics / Mechatronics Engineering or equivalent fields
• Knowledge of Programmable Logic Control (PLC) is an advantage
• Able to perform 12 hours rotating day and night shift
• Entry level candidates are welcome to apply

Working Hours:

• First 3 months on normal shift, after training will be placed on 12 Hour rotational Shift (Shift allowances provided)
• 8.00 am to 8.00 pm / 8.00 pm to 8.00 am

As a Bowling Technician in our Bowling Centre, you will report to our Bowling Manager.

What you’ll be doing:

• Ensure that the day-to-day operations and maintenance of the bowling lanes and peripherals are executed in a timely and complete manner
• Ensure bowling machinery, lanes, bowlers’ area, ball return mechanism, back-end mechanism, monitor screen, chasis, etc are maintained in the best possible condition
• Strip and oil 10 lanes, mop gutter, bowlers approach area daily and before events/functions and check pinspotter machine all the time and redress any fault occurrence during operations
• Check general cleanliness of the bowling lanes, bowlers area, bowlers approach area, back end, store, bowling balls & racks and backend machine parts
• Inform bowling Customer Service Officers to release lanes for use and to clear pins, house.
• Check and report any faulty machine or problem on lanes and to rectify it as soon as possible
• Oversee and ensure that stock, equipment and inventory levels are sufficient e.g. for machinery spare parts, lane maintenance chemicals, pins, bowling ball, etc.
• Ensure that the annual budget for bowling parts is planned yearly and expenses are controlled carefully
• Other ad-hoc duties assigned by Bowling Manager

• Provided first/second level trouble shooting & resolve production stoppages due to equipment issues.
• Monitoring and control facilities equipment.
  Replenished production material where applicable in the respective workstation.
• Performed process control checks where applicable.
• Participated in preventive maintenance & calibration checks for production and measuring equipment as scheduled
• New production line setup and fit-out works.
  Utility setup and equipment move-in, move out document submission.
  In charge for facilities equipment and maintenance of compressor & exhaust system, HVAC, ACMV

Requirements

• Min Nitec in Mechanical Engineering
• Min 2 years experience in Manufacturing/Semicon Company
• Strong experience in HVAC/ACMV

Interested candidates who wish to apply for the advertised position, please APPLY with an updated copy of your resume to [email protected]

EA License No: 13C6305
Reg. No.: R1981808

For candidate who applied for the advertised position is deemed to have consented to us that we may collect, use or disclose your personal information for purpose in connection with the services provided by us.

• General workshop duties as assigned by the Workshop supervisor which may include:
• Assist with mechanical equipment repairs, overhaul & maintenance.
• Assist with other ongoing projects/jobs as and when required depending on need.
• Maintenance of workshop equipment
• General housekeeping and 5S duties.

Requirements:

• Previous work within a workshop environment.
• Mechanical competence.
• Good command of English both verbally and written.
• Basic computer skills.
• Can work both independently and as a team.
• Physically fit.
• Work flexible hours on occasions.

5 days work week

Tuas Area (Co. Tpt pick at Boon Lay MRT & CCK MRT)

Marine Engineering Co.

Interested applicants, please forward a detailed resume to [email protected]

Tempserv Pte Ltd

License No: 06C3745

Attention: Audris Teo / EA Personnel No: R1102063

Job Description

• Industry/ Organization Type: Information and Communication
• Position Title: Technician / Field Technician
• Working Location: Islandwide
• Working Hours: 5.5 days (Mon – Fri, 8.30 am – 5.30 pm; Sat, 8.30 am – 12.30 pm)
• Salary Package: Basic up to $2,200 + OT + Variable Bonus
• Duration: Permanent Role

Key Responsibilities

• Install, maintain, and repair equipment such as surveillance/detection cameras and travel time display panels.
• Diagnose and troubleshoot any issues with the equipment.
• Understand and work from blueprints, schematics, and technical drawings.
• Ensure all equipment is kept in the best possible condition, fulfilling all protocols and procedures.
• Work collaboratively with other team members to troubleshoot complex problems.
• Maintain a clean, organized, and safe work environment.

APPLY NOW!!!

• ITE in electrical or engineering is advantageous
• Candidates without experience are welcome to apply. Training will be provided
• Willingness to travel when necessary

Please apply through ANY of the following methods:

• Submit your application by clicking the APPLY button;
• Email your resume to Job(at)anradus.com.sg. Please indicate #65687 on the email subject.

Anradus Application Policy: We value each application and ensure every resume is reviewed. Our process is efficient, typically concluding within 3 working days. If you do not receive communication from us within this timeframe, it's likely that your application has not been shortlisted by our client. In such cases, we recommend continuing your job search to maximize your opportunities.

Anradus Pte Ltd | EA License No. 20C0161 | Adelin Chong | EA Reg No.: R1875641

Job Description

• Industry/ Organization Type: Food Manufacturer
• Position Title: QAQC Technician (Lab)
• Working Location: North – Senoko
• Working Hours: 5 days (Mon – Thurs: 8.00 am – 5.30 pm, Fri: 8.00 am – 5 pm)
• Salary Package: Up to SGD 2300 + AWS
• Duration: Permanent

Key Responsibilities

• Perform microbiological analysis of incoming raw materials and finished goods
• Assist in the preparation of microbiological media for analysis of samples, environmental monitoring, equipment cleaning effectiveness monitoring, and operators/QC personnel hygiene monitoring in accordance with the established procedures
• Maintain stability testing programs for finished goods
• Daily monitoring of temperature for laboratory equipment
• Perform general maintenance and verification of laboratory equipment according to the established verification programs

APPLY NOW!!!

• Diploma in Life Science/Microbiology Biotechnology
• Familiarity with standard laboratory testing procedures
• Proficiency in data entry and analysis
• Training is provided to an inexperienced candidate

Please apply through ANY of the following methods:

• Submit your application by clicking the APPLY button;
• Email your resume to Job(at)anradus.com.sg. Please indicate #65769 on the email subject.

Anradus Application Policy: We value each application and ensure every resume is reviewed. Our process is efficient, typically concluding within 3 working days. If you do not receive communication from us within this timeframe, it's likely that your application has not been shortlisted by our client. In such cases, we recommend continuing your job search to maximize your opportunities.

Anradus Pte Ltd | EA License No. 20C0161 | Celine Tan | EA Reg No.: R1873694