For interested applicants, do apply directly on this link - https://beex.breezy.hr/p/ce28deac9ab7-manufacturing-engineer

Your Role

As the Manufacturing Engineer, you will report directly to the Chief Technology Officer (CTO). Your daily schedule will include frequent interactions with a multi-disciplinary team, across teams from design to manufacturing to operations. You will need to work in Singapore. Remote work is not an option.

Your Job Scope

• Manufacturing Plan: Coordinate with engineering and production departments to develop and implement Manufacturing Plan for products, by drafting work instructions & test plans, preparing BOMs, communicating to suppliers and training manufacturing personnel.
• Technical Support and Diagnosis: Technical support and troubleshooting of production issues related to equipment, processes, quality, controls, and systems. Identify defects or deviations from quality standards and perform root cause analysis to determine the underlying reasons for these issues
• Quality: Upkeep work quality on the manufacturing floor, by implementing quality control procedures such as: comprehensive incoming and outgoing quality inspections, compliance to work instructions, and implementing corrective actions on any lapses
• Record-keeping: Maintain detailed records of quality tests, inspections, and audits. Generating reports on quality performance and communicating quality issues to relevant stakeholders.
• Continuous Improvement: Identify areas of improvement from assembly procedures to tooling, to enhance product quality, manufacturing efficiency, and reduce defects
• Training: Provide training to staff on quality standards, procedures, and best practices to ensure that quality requirements are consistently met
• Supplier Quality Management: Collaborating with suppliers to ensure that raw materials and components meet quality specifications and standards.
• Compliance with Regulations: Ensuring that manufacturing processes comply with industry regulations, standards, and best practices to meet legal requirements and customer expectations.
• Provide day-to-day technical and engineering support to the operating areas.

Desired Qualities

• (MUST) Bachelor's Degree in Electronics, Computer or equivalent Engineering
• 3-6 years of experience in quality engineering or in manufacturing
• Working knowledge of product development and manufacturing processes
• Experience with quality control and test procedures for tests such as in EMI-EMC, Vibration, temperature, humidity testing is a plus.
• Experience with Altium designer and other equivalent PCB CAD software.
• Experience with any 2D schematic, wire harnessing and cable assembly design software.
• Good analytical and problem-solving skills
• Able to multi-task and able to work in a fast-paced environment
• Excellent written and verbal communication skills
• Ability to work in a cross-functional team environment
• Excellent organization and time-management

Remuneration Package

• Market competitive salary
• Growth opportunities that align with your direct ability in helping the company, rather than an arbitrary corporate ladder
• Support for skills upgrading / learning credits
• Healthcare support
• Special access to industry events
• Well-stocked pantry with nice snacks

• Involve revese enginnering based on part given.
• Create the part drawing from the component by measuring and prepare the new cnc program.
• Lead a programmer and machinist to successfully deliver the cam program for precision machined component projects
• Work closely with senior management to prepare quotation and concept dedign for new projects
• Prepare and track schedules for live projects - manage deliverables targets by designers and drafters
• Train and groom new Cnc 3d cam programmer / machinist in company
• Create, maintain and enforce workflow processes to enhance design department efficiency
• Manage team KPIs

Job Overview

The future of technology is full of amazing possibilities that started in semiconductor manufacturing plants. Autonomous driving, drones, the Internet of Things – all of it is possible because of the breakthroughs in semiconductor manufacturing. From large dust-free factory to fully automated machines, this unmanned factory is not a dream but a testament of UMC daily operation in our contribution towards the future of technology. Join us and be part of UMC Smart Factory in managing complex production processes which allow you to experience first-hand on the operation of state-of-the-art factory and accelerate your growth!

Responsibilities

• Manage the production metrics of fully automated production lines
• Predictively identify and address possible production bottlenecks in a timely manner
• Coordinate resources to achieve daily production goals
• Lead in continuous improvement projects to increase productivity, staff operation efficiency and quality

Qualifications

• Possess at least a Bachelor's Degree in Electronic Engineering, Electrical Electronic Engineering, Chemical Engineering, Materials Science, Mechanical Engineering, Industrial Engineering, or Computer Science.
• At least 2 years of relevant working experience in semiconductor industry foundry
• Adept in project management as well as a strong sense of commitment
• Possess good communication skills in coordinating between relative parties
• Is self-demanding and committed to innovative solutions to complete tasks
• Proficiency in Excel(VBA) & SQL or Tableau for data analysis
• Able to commit shift work
• On duty required on weekend and Holiday
• Standby 24-hour for Fab Operation

Manufacturing Operator, Semi-Skilled Technician

- Quality Control Inspection.

- 5 Days work week. (Monday-Friday, 0800-1730)

- Salary $1600

- Perform any other ad hoc duties as assigned.

- No Experience can be applied.

- Training Provided.

- Great team player and collaborator.

- PR and Singaporean only.

** Interested applicants, can call 68444012 or email to [email protected]**

Job Description:The Operations Manager will oversee and manage the daily operations of the wooden container manufacturing facility. The role focuses on ensuring efficient production processes, maintaining quality standards, optimizing resource utilization, and driving continuous improvement initiatives.

1. Production Management:
   Plan, coordinate, and oversee the manufacturing process to ensure timely production and delivery of wooden containers.
   Monitor production schedules, resource allocation, and workflow efficiency.
2. Quality Control:
   Ensure compliance with quality standards and specifications.
   Implement and monitor quality control processes throughout production.
3. Team Leadership:
   Supervise and lead a team of production staff, providing training, guidance, and performance evaluations.
   Foster a safe, productive, and team-oriented work environment.
4. Inventory and Resource Management:
   Manage raw material inventory levels and optimize material usage.
   Collaborate with procurement teams to ensure a steady supply of necessary resources.
5. Operational Efficiency:
   Identify areas for process improvement and implement cost-effective strategies.
   Monitor operational KPIs and ensure performance targets are met.
6. Health and Safety Compliance:
   Enforce safety protocols and ensure compliance with workplace safety regulations.
   Conduct regular safety inspections and audits.
7. Stakeholder Communication:
   Act as a liaison between production teams, senior management, suppliers, and clients.
   Provide regular updates on production progress, challenges, and opportunities.
8. Budget Management:
   Assist in preparing and managing the operations budget.
   Monitor expenses and ensure cost controls are in place.

Fabrica AI is reinventing how robots are developed. Currently novel robots take 5-20 years. We are building a design automation platform to bring it down to a month, and have already demonstrated significant progress by developing tile grouting robots in record time. Robotics simulation and reinforcement learning has been advancing a lot making it 1000x cheaper to train robots compared to 5 years ago, and as Jensen Huang said at Nvidia GTC 2024, "the ChatGPT moment for robotics may be just around the corner." A couple other companies are building on the same paradigm shift but we are the only ones using it to automate hardware design, not just software.

Building robots and a design automation platform together brings great synergy - the platform helps us develop robots faster than anyone else and the robots allow us to gather data and do experiments at scale. Data gathering can be done through partnerships with other robotics companies, but doing experiments is crucial for grounding the platform in reality and ensuring its usefulness. The grouting robots are already deploying daily at construction sites and bringing value to clients. We are currently negotiating sales worth around 500k USD. With manufacturing cost multiple times lower than companies using a traditional robotic arm, our robots have an ROI in weeks. Our robot is also small and simple to use, operating from a single button without the need to upload floorplans or do any complex setup. Soon we would be expanding into other simple and valuable robots for the construction industry.

We’ve raised over 2.5m USD from Hoxton Ventures, Credo Ventures, our Professor from Cambridge University, Woh Hup, and the owner of BHCC (listed construction company). We’ve 2500sqft of space in Singapore where we have over 20 team members, and 1200sqft of space in Czechia where we have our software team.

Jakub Suchanek (CEO) has an engineering degree from the University of Cambridge and experience working on self-driving cars at Wayve and machine learning at Granta Innovation and Wacker. He is a worldwide winner of NASA SpaceApps and has won bronze medals in International Olympiads in Informatics and Physics.

Ronald Luc (CTO) earned a degree in Math and Computer Science from Masaryk University, where he was a teaching assistant, and supervised several deep learning theses. He has years of industry experience in both machine learning and self driving cars. With Jakub he won TechFest Munich, one of the EU’s top hackathons; and represented Czechia at the International Olympiad in Informatics.

Keefe Wayne Teo (COO & CFO), a University of Cambridge engineering graduate, served as president of Hackbridge.io, promoting entrepreneurship in tech. He has 100+ citations in research journals and four papers on sustainable energy. He previously worked at Entrepreneur First and has business development experience from other companies.

Website: https://www.fabrica.ai/ (and various press releases, awards, etc.)
Latest Grouting Robot Demo: https://www.youtube.com/watch?v=AVWjmaMuYM0

Fabricator videos

https://www.youtube.com/watch?v=4aoQ4QaEOPQ

https://www.youtube.com/watch?v=xnENP7zWzEM

https://youtu.be/qXpkFeEidac

https://www.youtube.com/watch?v=5SBiEBLMQ9k

Your internship would revolve around bringing our robot to market. You may be remunerated with a combination of salary and share options. This internship requires a candidate to have both an engineering background and a reasonable business acumen. Great communications skills are required as we work with many external contract manufacturers.

1. Pushing our product to pilot production (design for manufacturing, design for reliability, design for user-friendliness)
2. Connecting manufacturers and our R&D team to build and iterate on our prototype, creating new avenues for manufacturing at scale, manufacturing for reliability
3. Sourcing for and testing appropriate equipment and materials for R&D
4. Visiting industry trial sites, giving appropriate feedback to product development team
5. Speaking to industry players, ground workers, understanding the process of tile grouting to help us shape our solution, especially from an operational point of view
6. Hiring, recruitment, and outreach
7. Any other operational duties

A great candidate would possess the following:

• Value the direct impact on the product and proximity to clients at a startup and the growth potential of a startup
• Willing to work without a very well defined job scope and willing to adapt to changes week on week
• Ability to think of metrics to measure progress and deciding based on back of the envelope calculations
• Keenness to do more than is expected, impact driven
• Growth mindset driven

Our development process is very iterative and agile. Thus, there would not be a concrete plan more than 2 weeks ahead and your role/tasks is/are likely to evolve over time. Besides, a lot of testing has to be done on a construction site. If you like this process, you’d be a good fit for us. You would thus play a significant part in deciding how your work would contribute to our overall goals. Please email your resume to [email protected] if you are interested. Thank you

Interested applicants are invited to apply directly at the NUS Career Portal

Your application will be processed only if you apply via NUS Career Portal

We regret that only shortlisted candidates will be notified.

Job Description

• Lead advanced research in the formulation and processing of functional materials for 3D printing, materials characterization and analysis.
• Collaborate with interdisciplinary teams to integrate materials into functional prototypes and applications.
• Prepare research findings for publication in high-impact scientific journals.
• Assist in the supervision and mentorship of graduate and undergraduate students.
• Participate in lab management, including equipment maintenance, supply management, and ensuring compliance with health and safety regulations.

Qualifications

• Ph.D. in Materials Science, Mechanical Engineering, or a related field.
• Strong background in materials characterization and 3D printing technologies.
• Proven track record of publishing high-quality research in peer-reviewed journals.
• Excellent problem-solving skills and ability to work independently and collaboratively.
• Strong written and oral communication skills.

Roles & Responsibilities

• Ensure performance complies with specications, technical clarications, and drawings.
• To guide and supervise on works arrangement and site activity.
• To check all installation drawings and prepare relevant schedule.
• Monitor the daily progress of activities and prepare daily report of the status of each assignment.
• Managing project budgets. Able to work on weekend/public holiday.
• Able to work regularly under rooftop.
• Able to use Microsoft suite of Software including project.
• Prociency in AutoCAD is preferred.
• Good organizational skills and communication skills. Good technical competency.
• Carry out the electrical cabling works, tray & trunking works with installation.
• Experience in integration of the sites.
• Minimum Certicate requirement in Safety Supervisor.
• Candidates with a Diploma in Electrical and Electronics Engineering or above Minimum 3 years working experience on related sites

Roles & Responsibilities

• Ensure performance complies with specications, technical clarications, and drawings.
• To guide and supervise on works arrangement and site activity.
• To check all installation drawings and prepare relevant schedule.
• Monitor the daily progress of activities and prepare daily report of the status of each assignment.
• Managing project budgets. Able to work on weekend/public holiday.
• Able to work regularly under rooftop.
• Able to use Microsoft suite of Software including project.
• Prociency in AutoCAD is preferred.
• Good organizational skills and communication skills. Good technical competency.
• Carry out the electrical cabling works, tray & trunking works with installation.
• Experience in integration of the sites.
• Minimum Certicate requirement in Safety Supervisor.
• Candidates with a Diploma in Electrical and Electronics Engineering or above Minimum 3 years working experience on related sites

(a) Responsibilities:

The candidate is responsible for the end-to-end testing activities of an integrated e-payment system. The primary responsibilities would include carrying out the activities in the testing lifecycle including the test

planning, and analyzing business and system requirements.

The candidate will also be responsible for:

• Preparing the test environment, designing, and developing the test cases.

• Preparing the test environment, and executing the test procedures.

• Automating the test solution based on the system design using scripting or programming languages as well as performance tuning.

• Create traceability to requirements, analyze gaps and address them.

• Logging and tracking defects to closure

• Conducting test reviews with internal and external stakeholders.

• Perform root cause analysis for production and user acceptance defects, and address test gaps to ensure test efficiency.

• Develop design documents and user manuals that would effectively describe and provide clear instructions on the test automation solution to the end users including testers and stakeholders.

(b) Qualifications & Requirements:

• Tertiary qualification in Information Technology or Engineering

• At least 3 years’ relevant experience in executing testing and

developing test automation solutions involving devices (UI-based

or embedded) and/or back-office systems with familiarity on the full

system development lifecycle from requirement, development, to

testing and deployment;

• Good written and verbal communication skills;

• Able to work well both independently as well as in a team;

• Certification in software testing preferred;

• Experience in micropayments Fare Collection systems using Smart Cards and in diverse test execution phases (System Integration Testing, User Acceptance Testing, Performance testing) would be an advantage;

Job Scope

• Develop and execute comprehensive marketing plans to promote the company’s products.
• Create and manage engaging marketing content, including social media posts, brochures, and advertisements.
• Oversee and maintain the company’s online presence, including website updates and digital platforms.
• Design and implement email marketing campaigns to attract and retain clients.
• Plan and organize promotional events, product showcases, and industry collaborations.
• Conduct market research to identify trends, customer needs, and competitor activities.
• Provide insights and recommendations to improve product offerings and marketing strategies.
• Track and analyze marketing campaign performance and generate detailed reports.
• Collaborate with internal teams to ensure effective execution of marketing initiatives.

Job Requirement

• Bachelor's degree in Marketing, Communications, or a related field.
• Proven experience in marketing, preferably in the Food industry or HORECA.
• Strong written and verbal communication skills.
• Creativity and the ability to generate innovative ideas.

Interested applicant may apply thru whatsapp +65 84597671

SSMC (Systems on Silicon Manufacturing Company Pte. Ltd.), is a Joint Venture between NXP and TSMC. We offer flexible and cost effective semiconductor fabrication solutions by maintaining fully equipped SMIF cleanroom environment, 100% equipment automation and proven wafer-manufacturing processes.

At SSMC, every career journey is unique and rewarding. We're looking for innovative, passionate, and talented people like you to join our team.

We’re searching for a Senior Engineer/Engineer to be part of our Product Engineering diverse team of talent. You will be responsible for yield, quality and reliability issues of devices.

What you will be working on:

• Resolve yield, quality and reliability issues in the qualification of new devices
• Perform pre-tapeout risk assessment and communication with Business line/ Fab on the necessary actions to eliminate/ minimize risk
• Conduct product yield analysis to identify root causes of wafer sort and final test failures
• Work with Customers and Account Managers to maximize die output
• Establish product low yield criteria and dispositioning
• Provide product engineering support to failure analysis lab for electrical fault isolation
• Provide product engineering support to reliability lab to understand and resolve reliability failures
• Compliance to safety, discipline and housekeeping rules
• Support cost reduction through yield improvement and resolving excursion
• Participate in continuous yield and productivity improvement projects

More About You:

• Bachelor's Degree in Engineering (Electrical/Electronic) or equivalent
• 2 years of relevant product engineering experiences in front-end wafer fab environment or
• In depth knowledge of semiconductor device physics, electrical & electronics engineering fundamentals & wafer fabrication processes
• Strong analytical and problem solving skills
• Good communication and interpersonal skills

SSMC is committed to equal employment opportunities and abides by the Tripartite Guidelines on Fair Employment Practices (TGFEP). All qualified applicants will receive non-discriminatory consideration for employment on the basis of merit and regardless of age, race, gender, religion, marital status and family responsibilities, or disability, or any other attributes as protected by the relevant laws.

SSMC (Systems on Silicon Manufacturing Company Pte. Ltd.), is a Joint Venture between NXP and TSMC. We offer flexible and cost effective semiconductor fabrication solutions by maintaining fully equipped SMIF cleanroom environment, 100% equipment automation and proven wafer-manufacturing processes.

At SSMC, every career journey is unique and rewarding. We're looking for innovative, passionate, and talented people like you to join our team.

We’re searching for a MECHANICAL ENGINEER/ SENIOR ENGINEER to be part of our FACILITIES DEPARTMENT diverse team of talent. You will be responsible for HVAC systems, Clean Room, Building services and maintenance.

What you will be working on:

• To provide facilities support pertaining to Clean Room, Chillers and HVAC systems, Environmental Protection Systems, Process Utilities Supply Systems, Building Services and Maintenance, and other miscellaneous mechanical and facilities systems to wafer fabrication so as to ensure continuous supply of utilities and related facilities at the required performance level or specifications
• Formulate, implement, review and improve preventive and predictive maintenance programs for systems in charge so as to ensure that the systems function as intended at all times
• Carry out repair and troubleshooting of systems in order to restore systems to their operating conditions in the shortest possible time. Carry out root cause analysis and implement action plans to prevent recurrence
• Able to formulate effective reporting and tracking systems for monitoring of system performance and capacity usage. Recommend and implement improvement/enhancement projects where appropriate.
• Formulate, implement, review and improve operating procedures so as to ensure optimum operation of systems
• Monitor and review utility consumptions and work with users to implement projects to reduce the consumption where possible
• Knowledge of all relevant standards, legislations, codes of practice etc and ensure their compliance
• Provide guidance and training on the systems in charge to fellow colleagues so as ensure adequate working knowledge and system backup
• Ensure plant histories, drawings, data and other appropriate documentations are being generated and properly filed for future reference and review.
• Evaluate and recommend appropriate spares, consumables and other resources necessary for the day-to-day operation of the systems.
• Conduct project supervisions.

More About You:

• Master / Degree in Science, Mechanical Engineering, Building or equivalent. Preferred candidate with SCEM certification.
• 5 years of relevant working experience in semiconductor, pharmaceutical or petrochemical industry. Hands-on experience in day to day operation and maintenance essential.
• Experienced in managing cleanroom (Class 100 environment) systems
• Person shall act as SME for ACMV system. Person must have sound knowledge of operation and maintenance of Clean room areas and ACMV system
• Provide building services and maintenance, including building facilities repair and upgrading, housekeeping, landscaping and pest control.
• Knowledge of maintenance principles and good engineering practices.

SSMC (Systems on Silicon Manufacturing Company Pte. Ltd.), is a Joint Venture between NXP and TSMC. We offer flexible and cost effective semiconductor fabrication solutions by maintaining fully equipped SMIF cleanroom environment, 100% equipment automation and proven wafer-manufacturing processes.

At SSMC, every career journey is unique and rewarding. We're looking for innovative, passionate, and talented people like you to join our team.

We’re searching for a Engineer/ Senior Engineer to be part of our Photo Process department diverse team of talent. You will be responsible to sustain and improve all metrology tools and recipe indices to meet operations goals

What you will be working on:

• Optimize process capability to meet operation needs
• Perform Shift duties to support production
• Implement projects to upkeep process capabilities and reliabilities
• Troubleshoot process issues, establish Best known methods for future reference.
• Monitor and control process performance indices such as Cpk
• Work as a team with both equipment and manufacturing Engineers to meet module objectives
• Start-up new equipment processes which involves process characterization and development
• Establish and maintain a good audit system for both internal and QA audit on process documentation.
• Troubleshoot out-of-control situations and decide on the lot disposition in an out-of-spec situation.

More About You:

• Bachelor Degree in Engineering, Science or equivalent
• 1-3 years experience in semiconductor manufacturing environment. Fresh graduates with keen interest to develop a career in semiconductor manufacturing environment are welcome to apply.
• Basic engineering knowledge, which may include semiconductor devices theory, electronics, digital principle and wafer fabrication processes.
• Good communication and presentation skills
• Proficient in Microsoft business applications
• Good problem solving skills
• Posses logical thinking skills
• Team Player
• Strong sense of responsibility
• Positive learning attitude
• Able to take pressure under time-constrained situations
• Detail-oriented

SSMC is committed to equal employment opportunities and abides by the Tripartite Guidelines on Fair Employment Practices (TGFEP). All qualified applicants will receive non-discriminatory consideration for employment on the basis of merit and regardless of age, race, gender, religion, marital status and family responsibilities, or disability, or any other attributes as protected by the relevant laws.

LOCATION: JURONG
WORKING TIMING: 8.30AM-5.30PM (5DAYS WORK WEEK)
ACCOUNTS ASSISTANT ($2,500 - $3,000)

JOB DUTIES & RESPONSIBLITIES:

1. Preparing and processing invoices, payments, and other accounting transactions in a timely and accurate manner
2. Preparing stock inventories, conduct stock take on monthly basis, stock reconciliation
3. Preparing tax computation for GST
4. Reconciling bank statements and maintaining accurate financial records
5. Assisting with the preparation of monthly and annual financial reports
6. Providing administrative support to the accounting team, including data entry and filing
7. Prepare audit schedules and fixed asset schedule
8. Liaising with internal and external stakeholders to resolve any accounting-related queries or issues
9. Ensuring compliance with relevant financial regulations and company policies

Skill/Experience
* Minimum of 1-2 years of experience in an accounting or finance-related role
* Strong attention to detail and excellent numerical skills
* Proficient in the use of accounting software and Microsoft Office applications
* Good communication and interpersonal skills, with the ability to work collaboratively in a team
* Ability to work under pressure and meet deadlines
* Relevant accounting qualifications

*Able to start work within short notice will be highly advantageous.*

Please be notified that only shortlisted candidates will be notified

By submitting your personal data and/or resume, you give consent to the collection, use, and disclosure of your personal data and/or resume by the company (or its agent) for the purpose of the processing and administration by the company relating to this job application.

EA Personnel Name: YEO AHN AHN

EA Personnel No: R22109014

EA License No: 21C0845

The candidate need to work in construction site and need to have construction site work experience. candidate must work shift work and long hours till complete the concrete work task. co -ordination with clients and supervisor and company executives. need to know how to estimate quantity for the concrete volume and steel and form work materials requirements.

About Us

Vivo Surgical is a patient-focused, clinician-driven medical device developer and manufacturer. Headquartered in Singapore with offices in China and Thailand, we are pioneering a novel endoscopic surgical robot for complex endoluminal surgeries. ISO 13485 certified with international accreditations awarded such as the US FDA and European CE mark, our devices target the medical needs of the world through innovative applications of science & technology. These encompass such fields as in vivo surgical LED lighting, portable endoscopy and endoscopic robots, which are strategically co-developed with world-class healthcare institutions and KOL collaborators. Join us as we build towards our vision of being Asia Pacific’s leading medical device developer and manufacturer.

About The Role

We value the importance of having a robust engineering team that would serve as a key pillar for sustained commercial success. To that end, we are looking for an Electrical Engineer to join us on this journey. In this role, you will be part of our fast-growing team and will take ownership of your role from the get-go. You will be working on the electrical interfaces of our robot from the design and development phase all the way to manufacturing. You will be developing these solutions alongside our clinical KOLs to produce and test the parts and subsystems that will eventually be integrated into the robotic system. Throughout the process, you will also be involved in the verification and validation testing phase such as producing testers, generating test protocols and reports. Your role will require you to work in close tandem with our external partners and suppliers.

Your responsibilities shall include the following:

• Involved in the establishment of the robotic system’s design requirements according to users’ needs.
• Design and develop hardware system architecture and electrical systems based on set requirements.
• Generate schematics and electrical diagrams following respective standards and best practices.
• Source, evaluate and troubleshoot components, PCBAs, wire harnesses and subsystems.
• Assist in developing test protocols and reports to verify various subsystems and the main system.
• Involved in developing testers and test tools for verification tests.
• Support the team with electrical safety and EMC testing.
• Take part in the design control and risk management documentation generation tasks.
• Work with the team to optimize the system’s cost, manufacturability, quality, and reliability.
• Contribute and watch your ideas materialize into the fast-paced iterations of our system to constantly strive to meet the end users’ needs.

Your Qualifications & Experience

• Minimum Bachelor’s degree in Electrical Engineering, or related.
• At least 3 years’ experience in Electrical, Embedded Systems, Robotic Engineering, or related fields.
• Skilled in PCB design software such as Altium Designer or other similar tools.
• Experience in circuit design with ARM MCUs is essential.
• Hands-on experience with embedded communication protocols such as UART, I2C, SPI, CAN, TCP.
• Knowledge of embedded platforms such as MCUs (STM32), DSP, FPGA will be advantageous.
• Adept at utilizing equipment such as multimeters, oscilloscopes and spectrum analyzers.
• Hands-on experience with soldering equipment and crimpers preferred.
• Knowledge of C/C++ and Linux will be an advantage.
• Understanding of standards such as IEC 60601-1, 60601-1-2 and 62304 will be a plus.
• Strong analytical, troubleshooting, problem-solving, and communication skills.
• Ready to embrace a positive and collaborative mindset to thrive in the dynamic start up environment.

Contact

Please send your CV and cover letter to: [email protected]. We look forward to receiving your application.

You will be a key member of the R&D Digital Translation team established under the Singapore Maritime Institute. The R&D Digital Translation team develops and operates digital and cyber products and translates R&D projects to real world implementations for the maritime industry.

You will collaborate with various project managers, solutions architect and infra engineers to deliver leading-edge digital solutions and services to meet the business requirements of the maritime community. You are pro-active, self-motivated and resourceful team member with good technical or digital knowledge and possess strong influencing and people handling skills. You are constantly looking at new ways to apply digital technologies to meet business needs and can handle multiple projects concurrently.

Key Responsibilities

1. Design, build and maintain the software development pipeline automation with related toolsets to enable CI/CD

2. Design and implement the infrastructure and operating environment for container-based microservices that will meet the agreed high availability, performance and security requirements

3. Utilise native cloud tools to monitor the health and performance of the production and UAT environments, and automate the alerts as part of the incident reporting framework

4. Work closely with development teams and other internal teams to ensure that solutions are designed in accordance to requirements to facilitate scale/performance, security and operability

5. Work closely with on-site Tenant Facility Management (TFM) team to supervise day-to-day cloud operations which include activities such as regular patching and system configuration

6. Support and ensure that the software releases are aligned with MPA's internal software release and deployment process

7. Facilitate and support troubleshooting or root cause analysis of platform issues or incidents

8. Proactively monitor and identify opportunities for automation, process improvement and architecture simplification

9. Participate in project planning and management activities

10. Research and develop prototype using relevant technologies and trends for continuous improvement of the platform

Requirements

1. Background in IT/Computer Science/Computer Engineering or relevant discipline

2. At least 2 to 3 years of working experience in DevOps automation, containerisation and orchestration

3. Strong knowledge and experience in Microsoft Azure and/or Amazon Web Services and related cloud services (e.g. Azure DevOps, hands-on experience using Azure Administrative portal). Certification(s) in Microsoft Azure (e.g. MCSE: Cloud Platform and Infrastructure or equivalent) and Amazon Web Services will be an advantage.

4. Strong knowledge and experience in software development automation tools

5. Strong scripting skills (e.g. powershell, cli, python)

6. Strong understanding and experience in virtualisation and networking in a container environment such as Kubernetes, Docker

7. Strong understanding of cloud computing/container deployment and management

8. Strong understanding and practice of Agile projects (e.g. SCRUM)

9. Experience in working with Government Commercial Cloud is preferred.

The Site Engineer (Building) is responsible for assisting on the progress of site works and manpower related aspects of the project.

The responsibilities of this position are, and not limited to, as follows:

• Monitor and supervise Engineers / foremen, ensure compliance to the quality procedures & standard of workmanship. Checking on quality and quantity of work by subcontractors.
• Preparation of detailed program for the site team to follow accordingly & completed in time.
• Resolve drawing discrepancies & technical difficulties with Technical team.
• Coordinates between sub-contractors/vendors/internal departments and monitor site manpower / material / equipment demands to meet schedules.
• Liaise with the Consultants on the submission related to structural works and Technical Department.
• Plan all works on site, including program schedules and construction methods, forecast equipment, material and manpower requirement, and control usage and wastages of all.
• Adherence to safety practices in the work place.
• Any other duties that may be assigned to you from time to time as your superior / management deem fit.

Qualifications and Education Requirements

• Education: Degree in Civil Engineering
• Experience: Prior 3 years experience in building projects

Main Duties:

• Oversee the construction activities and progress, plan, implement and monitor work
• Schedule in accordance to the master and detailed work program
• Liaise with Professional Engineer on the Temporary works
• Liaise with consultants (QPS) for technical issues and coordinate the site activities with subcontractors
• Handle of technical and engineering problems
• Provide guidance to supervisors in relation to construction works, ensure progress according to schedule,
• Maintain quality standards, carry out site inspections and resolve technical issues on time
• Prepare report and method statement whenever necessary
• Manage and control workers and monitor their work closely to keep site safer and neat
• Supervise ongoing site activities closely

We are looking for an Electrical Engineer with 2-5 years working experience who would have the following experience / knowledge/ qualities :-

• Basic Electrical Building Services Design knowledge
• Familiar with local codes and standards (e.g SS 568, 560 etc)
• Able to perform cable size and voltage drop calculation conforming to local codes and standards. Familiar with earthing and lighting protection works.
• Familiar with CAD software and able to make minor modification independently.
• Self-motivated individual able to lead a team of supervisors and electricians independently.
• Coordinate with Project Team to execute the works including scheduling of works for the team.
• Coordinate and support Project LEW for Power Turn ON, Testing and Commissioning.
• Project progress monitoring & updating to Project Manager
• Able to communicate and present to client on project status etc.
• Able perform Bid Estimation and submission.
• Able to perform material take off from project drawings (e.g. cable containment routing drawings, small power and lighting layout etc)

Requirements

• Min Diploma in Electrical Engineering or equivalent
• Strong technical background with sound knowledge of electrical construction works
• Proficient in MS Office (e.g Excel, Word & Power Point)
• Possess good writing, communication and interpersonal skills
• Drafting knowledge using AutoCAD is an added advantage
• Working in a “Live” process plant is an added advantage.
• Fresh Graduates are welcome to apply

We are looking for an Instrumentation Engineer with minimum 5 years experience who would have the following experience/knowledge/qualities:-

• Familiar with local and international instrument and panel installation standards
• Hands on experience in calibration of instruments
• Able to Perform Loop checks
• Coordinate with Project Team to execute the works including scheduling of works for the team.
• Self-motivated individual able to lead a team of supervisors and Technicians independently.
• Project progress monitoring & updating to Project Manager.
• Able to communicate and present to client on project status etc.
• Able perform Bid Estimation and submission.
• Able to perform material take off from project drawings (e.g Hook up drawings, P&ID, Instrument index, I/O list etc)
• Proficient in MS Office (e.g Excel, Word & Power Point)
• Working experience in “Live” Process plants is an added advantage

Roles

The ideal candidate will be responsible for assisting the project manager and project team with project documentation and control, job cost accounting, scheduling, and construction supervision efforts. To be successful, this candidate should feel comfortable taking on many tasks that require various skills, and appropriately prioritizing those tasks' completion.

Responsibilities

• Assist with on-site management to ensure project success
• Ensure project plan is moving forward to meet anticipated deadlines
• Responsible for RFI and submittal process
• Processes owner billings and project related accounting issues

Qualifications

• Bachelor’s degree in mechanical or industrial engineering or equivalent experience
• 1 - 3 years' of experience as a project coordinator, project engineer, or project manager
• Strong experience in AutoCad and Microsoft Office Suite
• Familiarity with rules, regulations, best practices and performance standards
• Previous experience in the marine or engineering industry is a plus

Employment Type

Full-time

IT Infrastructure Support:

• Provide Level 1 technical support to end user, including software & network problem
• Deployment of new computer, including installation of software to end user
• Create & maintain end user account (AD & Email)
• Co-ordinate with external vendor for support
• Involve with infrastructure project & setting up new site office
• Responsible for new staff orientation briefing
• Provide onsite support to end user
• Ad-Hoc duties/task as per assigned

General:

• Create and maintain documentation on technical problem.
• Procurement of IT hardware and software
• Update & maintain IT inventory
• Disposal of IT hardware

Requirements:

• Nitec / Higher Nitec / Diploma / Advanced Diploma in IT
• Min. 2 years of experience or relevant working experience. Preferable with desktop support experience
• Basic Active Directory, Networking & MS365 skill. Candidate with Server, Hyper-V & Firewall knowledge is a plus point
• Good Knowledge on Microsoft Product
• Travel to various location around Singapore
• Able to work independent & multitask

Job Responsiblities :

• Responsible for environmental protection, safety and health, radiation protection and other new government announcements or revised laws and regulations.
• Responsible for the planning, reviewing and implementation of occupational safety and health management plan.
• Assist in the investigation of occupational accidents, and be responsible for external notification and declaration.
• Responsible for various environmental safety and health related Management Systems audits and inspections and tracking the gaps and recommendation for improvements.
• Responsible for the planning, reviewing and implementation of GHS, chemical classification management.
• Responsible for the audit of contractors, suppliers and licensed waste disposal companies.
• Responsible for the company's various environmental safety and health related education and training planning and implementation.
• Responsible for ISO 14001, ISO 45001, SS 651 and other management systems operation, maintenance and internal audit, and complete the external audit planning and execution.
• Responsible for the IH and Medical Monitoring program.
• Organize all Fire Drills and CERT related activities.
• Perform ISEP related project plan assigned by the management.

Job Requirements:

• A Degree qualification in a relevant discipline
• Min 2 years of relevant working experience in Semiconductor Environment,.
• An excellent team player with good interpersonal skill
• Strong logical thinking capability and good analytical skill
• Highly committed with good ownership and accountability
• Able to adapt in a fast pace environment and work under pressure