(a) Responsibilities:

The candidate is responsible for the end-to-end testing activities of an integrated e-payment system. The primary responsibilities would include carrying out the activities in the testing lifecycle including the test

planning, and analyzing business and system requirements.

The candidate will also be responsible for:

• Preparing the test environment, designing, and developing the test cases.

• Preparing the test environment, and executing the test procedures.

• Automating the test solution based on the system design using scripting or programming languages as well as performance tuning.

• Create traceability to requirements, analyze gaps and address them.

• Logging and tracking defects to closure

• Conducting test reviews with internal and external stakeholders.

• Perform root cause analysis for production and user acceptance defects, and address test gaps to ensure test efficiency.

• Develop design documents and user manuals that would effectively describe and provide clear instructions on the test automation solution to the end users including testers and stakeholders.

(b) Qualifications & Requirements:

• Tertiary qualification in Information Technology or Engineering

• At least 3 years’ relevant experience in executing testing and

developing test automation solutions involving devices (UI-based

or embedded) and/or back-office systems with familiarity on the full

system development lifecycle from requirement, development, to

testing and deployment;

• Good written and verbal communication skills;

• Able to work well both independently as well as in a team;

• Certification in software testing preferred;

• Experience in micropayments Fare Collection systems using Smart Cards and in diverse test execution phases (System Integration Testing, User Acceptance Testing, Performance testing) would be an advantage;

Job Description

• Diagnose and resolve problems that occur in daily production lines/machines to minimise downtime and quality loss costs.
• Liaise with other departments to develop improvement plans to reduce quality loss costs and other cost savings activities.
• Develop process documentation and operating instructions for new/revised processes and/or products.
• Conduct the planned maintenance work for production machines & equipment to maintain optimum operating conditions.
• Manage Process Change control documents when implementing process and/or location changes on the assigned production process

Requirements

• Diploma or Degree in Mechanical / Mechatronic Engineering
• Min. 2 years experience in electronics connectors manufacturing environment
• Hands-on, enjoy solving problems
• A collaborative teammate
• A strong communicator and an active listener
• Strong analytical skill

Job Responsibilities:

• Able to plan / coordinate site works and resolve drawing details and discrepancies.
• Able to liaise with consultants and subcontractors.
• Able to work independently and as a key member of the Site Management.
• Ability to identify potential and occurring problems that affect the schedule of works at site and recommend solutions to relevant team/department.
• Review drawings for conflicts with Structural/M&E and liaising with consultants to resolve issues.
• Ensure all works are carried out within schedule and maintain the required quality.
• Ensure work safe environment at the work site and manage workers.
• Assist Construction/Project Manager in overseeing the daily construction and site coordination of different activities.
• Responsible for preparing, submission and monitoring of technical drawings, method of statements and shop drawings.
• To monitor the progress of work against the baseline schedule & preparation of daily records & monthly site progress reports.
• Responsible for general on-site technical and engineering matters.
• Quality Control.
• Co-ordination of works with subcontractors.
• Liaise with the consultants on technical and quality issues.
• Arrangement for inspection of works.

Job Requirements:

• Bachelor degree in Civil Engineering or related equivalent
• Required skill(s): MS Office, preferable candidate with AutoCad skills
• Minimum 2 years Site/Working Experience

Job Description & Requirements

Job Description

• To assist in contract administration which include cash flow/ budgetary forecasts, cost estimates, cost data analysis, tender evaluation, processing of payments, claims, variation orders and preparation of reports and approval papers
• To ensure that contracts are administered in accordance with executed contract documents

Responsibilities:

• Coordinate with internal operation, M&E and Design team for interfacing works affecting architectural items
• Attending meeting with client, consultants or sub-con to discuss all architectural related issues.

Requirements:

· Have experience in engineering life cycle of Power Projects and have gone through all phases of project starting from FEED stage to conceptual and basic design to detailed engineering, procurement, tendering, construction to commissioning.

· Programing skills PLC, SCADA, AUTO CAD

· At least 6 years’ experience in local project

Your responsibilities include:

• Conceptualize M&E designs and execute the project with the detailed designs.
• Manage and engage client/consultant/ contractors and local authorities to drive project execution, submission to authorities and overall on-site construction supervision.

What you will need:

· A recognized university degree Mechanical or Electrical Engineering or Building Services.

· Minimum 2 years’ of relevant experience in design and implementation of building services.

· Strong team-working, communication and interpersonal skills. Able to build good working relationships with client and key stakeholders.

· Open to opportunities to be trained on a wide range of technical and management topics.

Company's Profile
Julian Grey’s client is a global semiconductor equipment provider, specializing in inspection solutions for various industries. They have offices in APAC and are seeking motivated individuals to join their growing team.

Responsibilities

• Configure semiconductor devices, troubleshoot issues, and document engineering advancements.
• Create procedures for machinery assembly, assessment, and testing.
• Work with engineering and software teams to enhance system architecture.
• Partner with multidisciplinary engineers to address system challenges.

Requirements

Experience in setting up automated systems.

Proficient in electro mechatronic systems.

Follow us for more updates, interview tips!
https://www.instagram.com/juliangreygroup/
https://www.linkedin.com/company/juliangreygroup/
https://www.facebook.com/juliangreygroup/
Our telegram channel for job opportunities - https://t.me/jobopportunitiessg

Interested Applicants
Please WA Jian Wei @ 87389860
Shortlisted candidates will be notified

Quek Jian Wei
Reg No. R22110928
Julian Grey Corporate Advisory Pte. Ltd.
EA License No: 19C9568

• Preparation of documents (E.g. order processing, verifying payment, delivery orders).
• Liaise with various stakeholders to ensure smooth delivery.
• Perform Data entry and maintenance of database.
• Maintain and update sales records and ensure files are backed up.
• Assist in the implementation of new Inventory Management System (IMS)
• Provide administrative support to the sales team.
• Assist in monthly sales closing activities

Elsa Fontanne (CEI No. R24124496)

Recruitment Consultant

Contact Number: 67860100

Email Address: [email protected]

Recruit Express Pte Ltd / EA Licence No: 99C4599

We regret only shortlisted candidates will be contacted

Location: Pioneer (2 way transport pickup from Jurong East)
Salary: Up to $7,000 per month, with AWS and Variable Bonus

Working Hour: 5 Day, 8.45am to 5.30pm

About the Role:
Oversee day-to-day operations at our food production facility. The ideal candidate will ensure product quality, compliance with food safety and regulatory standards, and efficient use of resources while maintaining a safe working environment.

Key Responsibilities:

• Oversee daily production operations to ensure optimal product quality and efficient execution of activities.
• Ensure strict adherence to food safety and regulatory requirements at all times.
• Manage end-to-end production processes for a variety of products, including manpower, materials, machinery, and methods.
• Prepare and present daily, weekly, and monthly production performance reports to management.
• Plan and manage production schedules to meet output targets in a timely manner.
• Lead, supervise, and motivate a team of production supervisors and workers to achieve productivity and quality goals.
• Monitor adherence to factory operations procedures, food safety standards, and statutory regulations.
• Collaborate with Quality, Engineering, and Warehouse departments to address and resolve operational issues.
• Ensure comprehensive preventive maintenance programs for all machinery to minimize downtime.
• Drive continuous improvement initiatives to enhance production efficiency and productivity.

Key Requirements:

• Diploma or Degree in Engineering, Food Science, or a related field.
• Minimum of 5 years of experience in factory operations or production management, preferably in the food manufacturing industry.
• Strong leadership and people management skills
• Knowledge of food safety standards and compliance requirements
• Excellent organizational and problem-solving abilities.
• Proficiency in production planning and reporting systems.
• Technical knowledge of factory equipment and preventive maintenance processes.

Interested candidates please apply online or send your latest CV to [email protected]

AlwaysHired Pte Ltd

Reg No: R1549345

EA: 24C2293

We regret to inform that only shortlisted candidates will be notified. Please note that your response to this advertisement will constitute informed consent to the collection, use, and/or disclosure of personal data by AlwaysHired, its affiliates and, where necessary, to relevant third parties, for purposes such as job application processing, career advisory, research, and other administrative purposes, in compliance with the relevant provisions of the Privacy Policy available at www.alwayshired.com.sg/privacy-policy

Our client is a well-established MNC, market leader in the 3PL Logistics industry. Due to their current expansion plan, they are looking for Quality Executive, in hopes of developing the current high performing team. They are located in the East - easily assessible.

Responsibilities:

• Conduct daily meetings to address logistics-related manufacturing NCs.
• Validate defects with QC support, providing corrective action recommendations.
• Resolve logistics issues with proper containment and corrective measures.
• Manage complaints, perform root cause analysis, and implement improvements.
• Lead quarterly audits, report findings, and ensure timely closures.
• Prepare quality guidelines and instructions.
• Oversee raw material warehouse quality supporting manufacturing.
• Compile weekly, monthly, and quarterly logistics reports for customer review.

Requirements:

• Min Degree in Supply Chain or related study
• Min 3 years of quality experience in manufacturing setting, well wersed in methodologies such as CAPA, GDPMDS and Six Sigma

Interested candidates who wish to apply for the advertised position, please click APPLY NOW or email an updated copy of your resume/cv.

We regret that only shortlisted candidate will be notified.

Email: [email protected]

Recruitpedia Pte. Ltd.

EA License No. 19C9682

EA Reg. No. R2198636 (Oh Puey Xin)

Responsibilities:

• Manage technical transfer of products/projects in assembly, testing, and customer interactions.
• Offer technical support for manufacturing and testing during product builds.
• Assist QC with technical support in resolving RMA issues.
• Support QA in compliance, regulatory matters, customer interactions, and audits.

Requirements:

• Diploma in Electronics Engineering and above.
• Minimum 2 years of working experience in Electronics Manufacturing Industry.
• Skilled in managing product/project manufacturing, transfers, and troubleshooting.
• Experienced in PCBA manufacturing and testing for products/projects.
• Preferably experienced in a manufacturing environment with ISO13485 and FDA standards.

_______________________________________________________

HOW TO APPLY :

Interested candidates, please submit your resume by clicking on “Quick Apply” or contact [email protected] for more details.

Please provide following information in the resume for immediate processing

1) Reasons for leaving current and/or last employment

2) Last drawn and/or current salary

3) Expected salary

4) Date of availability and/or Notice Period

All applications will be treated in strictest confidence and only shortlisted candidates will be notified

Wee Wai Dan

EA License No : 03C5391

EA Reg No : R22109628

Job Description

• Industry/ Organization Type: Manufacturing
• Position Title: Manufacturing Engineer
• Working Location: Tai Seng
• Working Hours: 5 days (Mon – Fri, 8.00 am – 6.00 pm)
• Salary Package: Basic salary up to $4,300 + AWS + Performance Bonus
• Duration: Permanent Role

Key Responsibilities

• Help with New Production Introduction tasks: develop manufacturing processes, design tools, create schedules, control costs, support sourcing, qualify quality, support tests, reduce product costs, and introduce products into the supply chain.
• Lead technical aspects of manufacturing processes for cables, harnesses, mechanical assemblies, inspections, and testing, including designing tools and fixtures.
• Utilise knowledge of electrical/electronic equipment production and testing methods.
• Manage multiple priorities under tight deadlines to successfully complete and make projects profitable.
• Collect data and create manufacturing solutions and documents to support OMS, SOE, MI, drawings, and specifications.
• Perform assembly tasks and guide technicians/operators as needed.

APPLY NOW!!!

• Diploma or Degree in Electrical / Mechanical Engineering or a related professional certification.
• Proficient in Microsoft Excel to compare and study Bill of Materials (BOM).
• 2-5 years of relevant experience in related industry.

Please apply through ANY of the following methods:

• Submit your application by clicking the APPLY button;
• Email your resume to Job(at)anradus.com.sg. Please indicate #67156 on the email subject.

Anradus Application Policy: We value each application and ensure every resume is reviewed. Our process is efficient, typically concluding within 3 working days. If you do not receive communication from us within this timeframe, it's likely that your application has not been shortlisted by our client. In such cases, we recommend continuing your job search to maximize your opportunities.

Anradus Pte Ltd | EA License No. 20C0161 | Adelin Chong | EA Reg No.: R1875641

Our client is a global manufacturer. Due to business needs, they are now recruiting a Finance Analyst to be part of their FP&A team for ongoing transformation projects. They are located in the North Area - easily accessible.

Responsibility:

• Coordinate the preparation, compilation, and analysis of the Annual Budget prior to its submission to the corporate office.
• Analyze financial variances and take a proactive approach by conducting meetings with operations departments to review and discuss monthly forecast performance.
• Synthesize complex data from various sources and transform it into comprehensive management reports.
• Scrutinize a wide range of records and engage with various departments to ensure data accuracy and reliability.
• Oversee SOX compliance and address internal and external audit queries.
• Enhance processes and actively participate in ad-hoc LEAN projects.

Requirements:

• Min Degree in Finance / Accountancy or any related field
• Minimum 3 - 5 years experience in FP&A, typically costing
• Experience in manufacturing industry is highly preferred

Interested candidates who wish to apply for the advertised position, please click APPLY NOW or email an updated copy of your resume/cv.

We regret that only shortlisted candidate will be notified.

Email Address: [email protected]

Recruitpedia Pte. Ltd.

EA License No. 19C9682

EA Reg. No. R2198636 (Oh Puey Xin)

The Opportunity

Esco Lifesciences Group is Singapore’s most globalized life sciences company, with annual revenues close to SGD 200M and global operations in over 42 locations and 26 direct countries across North America, Europe, Asia, Oceania.

Esco Aster Pte Ltd is an affiliate of Esco Lifesciences Group and was first incorporated in 2017.

Esco Aster is a contract research development and manufacturing organization founded and deeply rooted by scientists enabling fellow scientists to translate their bench work into commercially available products at affordable prices.

Our scientific work is in emerging and frontier biology utilizing cells as a final product or deriving products from cells which often we use cells as the factory to derive our target product.

Our first commercial breakthrough success is Esco Aster is commercially first in class being first in the world to be certified for cultivated/cell-based meat to FSSC 22000 and by a competent food regulatory body.

We are first in the region to operate an end-to-end integrated full cell line creation/immortalization or engineered cell line, cell culture process development, analytical development for stem cells and exosomes with full cGMP Capabilities from Drug Substance and small-scale fill & finish for final Cell Therapy Product.

The work we do creates a remarkable and lasting impact on our world. We offer you an opportunity to be part of this exciting journey to own your career and firsthand exposure to new emerging modalities supporting translational sciences.

Join us as we redefine BioSolutions for One World and One Health for the current and future generations to come.

Esco Aster.

One World Biosolutions for One Health.

Who we’re looking for

Physical/Mental Requirements/Work Environment

· Excellent leadership and team collaboration skills with strong communication and negotiation skills.

· Ability to define problems, collect data, establish facts and draw conclusions.

· Ability to focus regardless of circumstances and stress induced pressure.

· Ability to take proactive approach.

· Ability to adapt for improvement and keep up to date on most current regulatory, local and international requirements and guidelines.

· Able to be curious and self-motivated to keep up to date with cell- gene- therapy and future nucleic acid therapeutics as well as other emerging modalities.

· Meticulous and systematic.

· Have strong focus on safety, quality and timeliness.

· Have strong critical thinking skills.

The Scope

You will be part of Esco Aster’s cGMP Technology Transfer Cell Manufacturing (TTCM) Unit contribute towards the overall site mission and objectives for culturing of cells and derivatives from cells.

You will work with internal and external stakeholders to maintain customer’s processes in the company’s cGMP facility.

You will oversee the strategic direction, development and execution of cell and gene therapy programs.

This role will ensure the successful advancement of our therapeutic pipeline from early development through technology transfer for clinical trial material manufacturing and eventual technology transfer out and/or commercialization, focusing on regulatory compliance, manufacturing excellence and market readiness.

Primary work location: Ayer Rajah Crescent, Singapore

Job Responsibilities

· Lead cross-functional biotechnicians function as a bridge between development sciences (contract research and development scientists) to cGMP cell processing facility from Drug Substance to Drug Product.

· Cultivate an atmosphere of continuous improvement, error prevention and quality standard including CAPA/RCA.

· Drive the overall success of infrastructure build and operations for cell and gene therapy programs.

· Collaborate across different unit operations to troubleshoot, test, and optimize various cell processing.

· Work seamlessly in a cross-functional environment.

· Collaborate with commercial teams to ensure launch readiness and market access.

· Serve as Subject Matter Expert during audits and due diligence activities.

· Support sales, business development, product specialists, and associated departments as Subject Matter Expert.

· Modify or improve procedures as necessary to optimize departmental workflows.

· Work with Quality Department and Aseptic Contamination Contral Strategy Ops to manage risk mitigation strategies.

· Author, review and edit relevant documents, including SOPs, Risk Assessments and Technology Transfer Protocols, Electronic Batch Records and other cGMP documents via GDP as needed.

· Conduct periodic technical reviews of Master Match Records (MBRs), including completed MBRs.

· Maintain a focus on customer and/or patient needs to facilitate technology transfer and batch execution.

· Take ownership and accountability for all deliverables and milestones in assigned projects.

· Summarize project work in a formal report and communicate effectively to stakeholders.

· Undertake other tasks as assigned based on project needs.

As Esco Aster is a single use multi product multi-modality cell processing facility CRDMO, the job scope will comprise of the following phases:

-Internal Technology Transfer In: From Internal CRD or External SMEs to cGMP

-Routine Cell Processing: In cGMP

-External Technology Transfer Out: from cGMP to External

Internal Technology Transfer In

· Work with both internal and external customer SMEs to transfer in and maintain customer’s processes in cell processing facility.

· Observe and take on a hands-on role with CRD scientists during process consistency runs to ensure successful knowledge transfer into cGMP.

· Develop material requirements, process execution and method transfer.

· Carry out Commissioning & Qualification (C&Q) activities of new process equipment and/or systems as identified for both functional as well as automation software and overall training qualifications of new biotechnicians.

· Support any investigation for deviations identifying root causes and implementing preventive actions and changes during the C&Q phase if required.

· Ensure Digital Readiness and qualification by working with electronic batch record department for eBatch records using Tulip with process engineers/experts.

· Perform Process Performance Qualification (PPQ), Aseptic Process Simulation runs, particle runs, training runs, water runs, pilot as well as engineering runs within cGMP environment before actual manufacturing with cross functional teams for the digital systems related to cell processing equipment and overall cGMP workflow.

· Work on Gas Cycle Development and Line Clearance Procedures with validation department.

· Collaborate with MSAT, QA and QC Departments to map out processes according to risk assessment and process flow diagrams per ISO for new processes.

· Collaborate with SMEs and Leadership team to determine equipment and materials for cell processing suite that will need to purchase per campaign to run cell processes.

· Author and review cGMP documents ranging from work instructions, SOPs, TQM etc.) for equipment and cell processing.

Campaign Cell Processing (Autologous / Allogeneic) for GLP Tox-CTM-Commercial

· Work with supply chain management to ensure readiness and raw materials are just in time and on schedule per chain of custody and chain of identity.

· Set up and perform cGMP cell manufacturing procedures and cell processing as an Operator and/or Verifier in a cGMP/aseptic environment to produce clinical/commercial material that is compliant with cGMP requirements as well as In-Process Monitoring, In Process Sampling.

Cell processing will involve being familiar with the following (OJT will be provided as need):

Cell Culture Upstream Small Scale

· Single Use Mixers and Single Use Cell Culture from Culture flasks, Cell factories, G-Rex or equivalent up to 40L single use bioreactors with microcarriers, Tide Motion adherent cell bioreactors, Cell Processing Isolators.

Purification (Midstream, Downstream Small Scale)

· Cell washing using cell washing devices, centrifugation or membrane-based technologies (spin filters /TFF) equivalent or chromatography.

· Loading of payloads into Exosomes or LNPs using incubation, extrusion or other methods.

Fill & Finish (in Isolators or closed systems)

· Bulk drug substance formulation.

· Sterile Filtration including PUPSIT (pre-use post sterilization integrity testing).

· Cell Filling in small scale single use closed automated bench systems from cryovials/screw-tube vials, CryoBags, COC/COP/Glass Vials with Stoppers and Flip-Off Caps including freeze drying operations.

· Visual Inspection, controlled rate freezing and secondary packaging.

· Ensure cGMP requirements compliance and other regulatory standards.

· Support investigations related to manufacturing processes.

· Support the clinical and commercial material as required

· Potentially lead a small team.

Requirements

· Minimum Bachelor’s Degree in Chemical Engineering, Pharmaceutical Science or relevant discipline with 2 years or more experience in a cGMP/aseptic environment in cell and gene therapy.

· Minimum of 2 years in cGMP cell and gene therapy manufacturing with relevant industry knowledge, hands on equipment experience and technical expertise.

· Proven track record in regulatory strategy and interactions.

· Strong knowledge of cGMP practices and global regulatory requirements.

· Experience in bringing cell and gene therapy products through clinical development to market.

· In-depth knowledge of the drug development process and commercialization pathways.

· Proficient in MS Office Suite (Microsoft Word, PowerPoint, Excel).

· Able to work independently and task oriented in a dynamic environment.

· Strong team player with a strong set of interpersonal skills.

· Excellent written and verbal communication skills.

Apply now by submitting a Cover Letter and CV to [email protected].

• Well established Company
• Basic $3000 to $5000 + AWS + Variable Bonus
• Working location: Redhill
• Working hours: 9.00am – 6.00pm (Mon to Fri)
• Training Provided for those with less experience
• Flexible work arrangement can be discussed with various position available

Job Responsibilities:

• BIM/CAD consultation and related services (i.e., model integration, scheduling attributes using modeled info, etc.) for design, construction, and post-construction activities
• Support project modelling requirements for project, ensure timely deliveries of outcomes
• Audit model and BIM data to insure data integrity and consistency
• Trouble-shoot & resolve BIM issues pertaining to BIM models
• Manage model data to facilitate model coordination between multiple disciplines and subcontractors
• Collaborate and communicate with multiple disciplines and sub-contractors to deliver and/or manage BIM data, if needed via online system / email etc
• Audit and report project metrics related to the BIM model and data as defined by the customer’s team
• Generate progress & status reports
• Support and educate the customer’s team to utilize BIM data
• Support sales team in requirement gathering, proposal writing; marketing and presentation.
• Other advice duties as assigned.

Requirements:

• Possess Diploma and or Degree in BIM or equivalent
• Proficient in Autodesk Revit/ArchiCAD or equivalent BIM software.

Candidates are encouraged to apply this position via Apply Now button with the following information in the resume

• Work experiences and job responsibilities
• Current and Expected salary
• Reason for leaving
• Date of availability
• Education background

We regret that only shortlisted candidates will be contacted.

NG JYA YEE (R23119014)
EA Recruitment Pte Ltd
EA License No: 21C0492

Responsibilities:

· Coordinate design drawings with consultants to comply with requirements of the Authorities

· Review and provide solutions on technical matters

· Planning, monitor and report drawing production progress

· Handle construction matters on drawings

· Liaise closely with Architectural, M&E Team and Authorities

· Prepare technical submissions for materials, construction methods and C&S drawings

· Supervise a team of BIM Modellers for production of coordinated drawings and concrete plans

· Involved in tendering for new projects

Requirements:

· Degree in Civil / Structural Engineering

· At least 5 years of relevant experience in British & Singapore Design Standards

· Registered with Professional Engineers Board, Singapore

· Excellent communication skills

Please include in the CV

· Last drawn

· Expected salary

· Notice period

Interested candidates, please submit your CV to [email protected]

EA License No: 06C4642

EA Reg No: R1110624

All applications will be treated in strictest confidence and only short-listed candidates will be notified

Responsibilities:

• Collaborate with Senior Engineers for design requirements and specifications.
• Assist in Analog, mixed-signal, and digital IC design.
• Participate in RTL coding and verification for digital ICs.
• Support design verification tasks.
• Conduct circuit simulations and analysis using Cadence, Synopsys, and Mentor Graphics tools.
• Assist layout engineers with floor planning.
• Analyze and debug silicon failures, suggesting design improvements.
• Contribute to the development of design methodologies to enhance efficiency.
• Document design work and test plans.
• Collaborate with cross-functional teams to ensure successful tape-out.

Requirements:

• Bachelor’s Degree in Electrical Engineering or equivalents.
• At least 2 years of relevant working experience.
• Understanding the IC development flow in advanced CMOS processes, including design, layout, and tape-out.
• Understanding the fundamental theories of digital or analog circuit design.
• Capability to generate inventive designs and circuit solutions tailored to fulfill customer needs.

__________________________________________________________

HOW TO APPLY :

Interested candidates, please submit your resume by clicking on “Quick Apply” or contact [email protected] for more details.

Please provide following information in the resume for immediate processing

1) Reasons for leaving current and/or last employment

2) Last drawn and/or current salary

3) Expected salary

4) Date of availability and/or Notice Period

All applications will be treated in strictest confidence and only shortlisted candidates will be notified

Wee Wai Dan

EA License No : 03C5391

EA Reg No : R22109628

Project Engineer (Marine Industry)

Salary: $6500 – $8500

Working Days: Mondays to Fridays (8:30am to 6pm)

Working Location: Pandan Road Singapore (Clementi)

Transport: We have company bus departing near Clementi MRT station at 8.10am to bring staff to our office and also a return company bus trip back to Clementi in the evening.

Responsibilities:

• Report to the Project Director / Manager in charge of the WTW system.
• Project Support: Provide technical expertise to oversee the design, development and construction of the WTW system.
• Interface with WTW system designer, vendors, fabricators including drawings reviews, sourcing equipment, cost control and monitoring, schedule monitoring and update.
• Project Execution: Oversee project implementation according to the requirements and objectives. This includes schedule monitoring, vendors sourcing and recommendation, purchase/ cost evaluation, resources allocation, attend to inquiries, clarifying technical details, supervising project execution, implementing corrective actions, conducting Factory Acceptance Tests, and finalizing as-built documentation.
• Troubleshooting and Repair: Diagnose and resolve malfunctions in deck machinery using technical manuals, hand tools, and power tools.
• Record Keeping: Meticulously maintain records of all changes, maintenance, repairs, and inspections.
• Develop operating, maintenance and safety procedures for the WTW system.

Requirements:

• Min Degree in Mechatronic or equivalent
• Min 5 years working experience in Marine Industry or shipyard environment.
• Good understanding of deck machinery such as winch, crane, lifting and handling equipment and the related IACS (particular ABS, DNV, BV) rules and regulations.
• Added advantage with specific experience in WTW system (Offshore Passenger Transfer System).
• Strong understanding of mechanical principles, hydraulic and electrical system and P&ID with ability to perform trouble shooting.
• Software – able to use MS Office, MS Powerpoint, MS Project, Adobe and AUTOCAD. Ability to use Primavera scheduling software an added advantage.
• Good understanding of Document Control. Added advantage with knowledge of ISO9001:2015 QAM system

Email: [email protected]

Tan Yong Zhi (Jackson) | Reg: R24124461

The Supreme HR Advisory Pte. Ltd | EA No: 14C7279

Position: Senior Software Engineer

Salary Range: $6,500 – $8,000

Working Days: 5 days (office hours)

Working Location: Tai Seng

Job Scope:

Software Development

• Design, Develop and Maintain device drivers for Windows Operating Systems
• Undertake WHQL testing and certification of drivers and device frameworks.
• Design, Develop and Maintain User Libraries and DLLs.
• Participate in all phases of SDLC and prepare corresponding documentation
• Undertake porting and maintenance of existing drivers to new frameworks and OS’s
• Resolve defects reported by internal and external customers
• Collaborate with USB host & device firmware development teams.

Job Requirement:

• Degree/Master’s in computer science/Engineering or related field.
• 5 years or above experience in the area of device drivers development, preferably USB
• In-depth understanding of WDM and KMDF frameworks, multi-threading and DLLs
• Excellent C Programming Skills.
• Professional attitude to work and meticulous in coding and testing
• Must have participated and experienced in SQA processes.

Email: [email protected]

Tan Yong Zhi (Jackson) | Reg: R24124461

The Supreme HR Advisory Pte. Ltd | EA No: 14C7279

Position: Desktop Support Engineer (Band 1)
Working Location: Jurong / Changi (Client Site)
Working Days : 5 Days ( Mon- Fri)
Working Hours: 8am-5pm
Salary Range: $2,600 - $2,800

Interested applicants can also send your resume to WA:+65 8839 3566 (Ms Angel) and allow our Consultant to match you with our Clients.

No Charges will be incurred by Candidates for any service rendered.

LIEW ONN KEE REG NO : R22108518

THE SUPREME HR ADVISORY EA NO:14C7279

Job Description

• Desktop Technician will provide day to day local\remote desktop support, receive inbound calls, answer questions, troubleshoot and document steps performed to resolve challenges with hardware, software and application issues in a ticketing system.
• Facilitate customer resolution for calls and engage their supervisors and managers to ensure operational consistency across all shifts within the IT Support Center.
• Desktop Support Engineer provides Break Fix, fault diagnosis and resolution.
• Providing fault analysis to customer’s various core operating systems and platforms, as well be able to provide support and apply desktop fault resolution for the approved application suite.

Position Responsibilities and Functions

• Provide first/second level contact and problem resolution for customer issues.
• Work with Third Party Vendors to remediate complex AV issues as needed.
• Provide timely communication on issue status and resolution.
• Maintain ticket updates for all reported incidents.
• Install, upgrade, support and troubleshoot XP, Windows 7, Windows 8.1, Windows 10 and Microsoft Office 2010, Cisco Jabber, another authorized desktop application.
• Should have basic knowledge of Mac operating system, to support Apple pc users.
• Install, upgrade, support and troubleshoot for printers, computer hardware.
• Performs general preventative maintenance tasks on computers, laptops, printers.
• Performs remedial repairs on Desktops, laptops, printers and any other authorized peripheral equipment.
• Use diagnostic tools to troubleshoot problems associated with network connectivity, and workstation hardware/software.
• Broad experience of IT with basic understanding of Networks, Servers, Audio/Visual, Smart Devices and Telecoms.
• This position requires the ability to work in a project-based environment requiring flexibility and teamwork. Performs other duties as assigned.

Qualifications and Skills

• Bachelor Degree or equivalent in Computer Science or related field.
• CompTIA A+, Microsoft Certified Professional (MCP) or better.
• 1-2 years’ experience in Windows Desktop support.
• Windows 7-10, Microsoft Active Directory, utilization of GPOs, MS Office 365, PC hardware installation and troubleshooting, Enterprise anti-virus solutions, Helpdesk ticketing systems.
• Mobile device management including IOS and Android devices, Enterprise encryption solutions, Windows PC/laptop management via Active Directory.
• Proven analytical, troubleshooting and problem solving skills.
• Willing to work off-hours and weekends when required for projects or emergency support.

In addition the Band 1 Technician will mentor and assist Band 0 technicians in their work and provide support to Band 2 Technicians in resolving tickets.

Construction Engineer (1 year Renewable Contract)

[Oil & Gas | EPC Industry]

• Basic: $4,000 - $4,700 (Depends on EXP)
• Working Days: 5 Days
• Working Hours: 8am-5pm
• Location: South (Near MRT)

Interested applicants can sent your CV to email [email protected] or via whatsapp to +65 8064 9869 (TongHai)

https://wa.me/6580649869

About Our Client:
Our client is a distinguished leader in the Oil & Gas and Petrochemical sectors, renowned for its engineering prowess and dedication to delivering landmark projects. As a reputable EPC contractor, they push the boundaries of what’s possible in infrastructure solutions, emphasizing innovation, safety, and sustainability to bring complex visions to life. This organization is at the forefront of engineering excellence, setting industry benchmarks throughout the region.

Why Join This Team?
Joining our client means becoming part of an inspiring and forward-thinking team that values your expertise and fosters your growth. This role offers you the opportunity to shape major engineering projects, making impactful contributions that resonate across industries. With an environment built around cutting-edge technology, collaborative problem-solving, and continuous professional development, you’ll thrive in a workplace that rewards ambition, innovation, and dedication.

Job Summary
As a Construction Engineer, is responsible for developing detailed construction plans under the guidance of the Site In-charge/Project Manager and ensuring seamless coordination of all site construction activities. The role involves working closely with multidisciplinary teams, subcontractors, and vendors to achieve project milestones efficiently and on schedule.

Job Scope

Key responsibilities include:

• Establishing execution frameworks and defining work sequences.
• Developing plans for temporary facilities, manpower mobilization, and construction equipment.
• Preparing schedules in collaboration with the project scheduler, including progress monitoring.
• Conducting constructability studies and scaffolding plans.
• Preparing critical documents such as specifications, procedures, and manuals.
• Planning and executing heavy equipment erection and haulage.
• Overseeing HSSE compliance in collaboration with the HSSE team.
• Coordinating vendor specialist support when required

Duties & Responsibilities

• Source and evaluate subcontractors, clarify scopes, and manage cost negotiations and PO issuance.
• Verify bills of quantities (BQ), estimate construction costs, and clarify project execution plans.
• Conduct kick-off meetings with subcontractors to align execution plans, work scopes, and technical requirements.
• Perform constructability studies and create execution strategies in collaboration with engineering disciplines.
• Ensure the latest field drawings are applied and coordinate the preparation of Method Statements and Risk Assessments (MSRA).
• Plan and schedule critical work paths with team members, subcontractors, and clients to avoid project delays.
• Supervise and monitor daily site activities, ensuring progress, quality control, and adherence to HSSE standards.
• Resolve technical issues, liaise with project stakeholders, and provide regular progress updates.
• Manage construction costs, monitor subcontractor billings, and evaluate variation orders.
• Submit weekly and monthly construction progress reports to management

Requirements

• Degree in Mechanical Engineering or equivalent.
• Mnimum of 5 years of experience in construction management, preferably in oil, gas, or chemical projects.
• Strong knowledge of construction planning, management tools and subcontracting practices.
• Proficiency in MS Office and schedule reporting tools.
• Clear understanding of construction practices and methods of execution.
• Excellent coordination, communication, and problem-solving skills

Interested applicants, please click "APPLY NOW" or send your resume to [email protected]

We regret to inform you that only shortlisted candidates will be notified.

By submitting your personal data and/or resume, you will be deemed to have agreed and consented to us collecting, using, retaining, and disclosing your personal information to prospective employers for their consideration.

Kho Tong Hai | EA Reg No: R24122411

As a bridge between the company's low-code PaaS, SaaS, and video conferencing products and customer needs, this role involves analyzing client pain points, designing tailored solutions, and driving their implementation. The role collaborates across departments to deliver value to customers and support business growth.

Responsibilities

• Collaborate with sales to engage in pre-sales communication, understand client needs, and provide forward-looking recommendations based on industry trends and product features.
• Design competitive and practical software solutions, including low-code application architecture, SaaS module configurations, and video conferencing integrations, supported by detailed implementation plans.
• Lead cross-departmental discussions to ensure technical feasibility and refine solution designs based on feedback.
• Deliver tailored product demonstrations, prepare comprehensive technical documentation, and support market promotion efforts through industry events and client presentations.
• Provide technical guidance during implementation, address project adjustments, and ensure solutions meet customer expectations.
• Communicate market trends and client feedback to R&D for continuous product improvement.

Requirements

• Diploma or higher.
• 3+ years of experience in software solution design, with expertise in low-code PaaS, SaaS, or related fields.
• Proficiency in low-code architecture, SaaS features, and multi-tenant principles.
• Strong technical writing and presentation skills.
• Proven ability to deliver customized solutions for diverse industries.

As a bridge between the company's low-code PaaS, SaaS, and video conferencing products and customer needs, this role involves analyzing client pain points, designing tailored solutions, and driving their implementation. The role collaborates across departments to deliver value to customers and support business growth.

Responsibilities

• Collaborate with sales to engage in pre-sales communication, understand client needs, and provide forward-looking recommendations based on industry trends and product features.
• Design competitive and practical software solutions, including low-code application architecture, SaaS module configurations, and video conferencing integrations, supported by detailed implementation plans.
• Lead cross-departmental discussions to ensure technical feasibility and refine solution designs based on feedback.
• Deliver tailored product demonstrations, prepare comprehensive technical documentation, and support market promotion efforts through industry events and client presentations.
• Provide technical guidance during implementation, address project adjustments, and ensure solutions meet customer expectations.
• Communicate market trends and client feedback to R&D for continuous product improvement.

Requirements

• Diploma or higher.
• 3+ years of experience in software solution design, with expertise in low-code PaaS, SaaS, or related fields.
• Proficiency in low-code architecture, SaaS features, and multi-tenant principles.
• Strong technical writing and presentation skills.
• Proven ability to deliver customized solutions for diverse industries.

Job Description

1. Perform site planning, coordination & inspection relating to the construction project so as to ensure that project completion timeline, requirements and budget are met.

2. Support Quantity Surveyors in conducting site measurement and inspections.

3. Able to plan / coordinate site works and resolve drawing details and discrepancies.

4. Any other tasks assigned by the management.

Requirement

1. Candidate must possess at least a Bachelor's Degree, Post Graduate Diploma, Professional Degree, Engineering (Civil/Structural) or equivalent.

2. Minimum 5 years construction experience with experience in civil construction industry.

3. Be able to work independently with minimum guidance and able to work within tight deadlines.

4. Bilingual in English and Mandarin is preferable

Interested applicants, please remember to include the following details for us to conduct a more effective job-matching for you:

1. Work experiences and job responsibilities

2. Current and Expected salary

3. Reason for leaving

4. Date of availability

5. Education background

6. Recent photo

As a bridge between the company's low-code PaaS, SaaS, and video conferencing products and customer needs, this role involves analyzing client pain points, designing tailored solutions, and driving their implementation. The role collaborates across departments to deliver value to customers and support business growth.

Responsibilities

• Collaborate with sales to engage in pre-sales communication, understand client needs, and provide forward-looking recommendations based on industry trends and product features.
• Design competitive and practical software solutions, including low-code application architecture, SaaS module configurations, and video conferencing integrations, supported by detailed implementation plans.
• Lead cross-departmental discussions to ensure technical feasibility and refine solution designs based on feedback.
• Deliver tailored product demonstrations, prepare comprehensive technical documentation, and support market promotion efforts through industry events and client presentations.
• Provide technical guidance during implementation, address project adjustments, and ensure solutions meet customer expectations.
• Communicate market trends and client feedback to R&D for continuous product improvement.

Requirements

• Diploma or higher.
• 3+ years of experience in software solution design, with expertise in low-code PaaS, SaaS, or related fields.
• Proficiency in low-code architecture, SaaS features, and multi-tenant principles.
• Strong technical writing and presentation skills.
• Proven ability to deliver customized solutions for diverse industries.

• 7+ years of professional experience in QA / Testing and agile methodology
• Skilled in both Manual and Automation testing
• Tooling experience in SQL Server/DB2/SQL, SOAP UI, XML, JIRA knowledge
• Experience in Selenium, APPIUM, KATALON, TOSCA, API, WINDMILL is required
• Good team player, fast learner and good analytical skills
• Strong knowledge of software QA methodologies, tools and processes
• Hands-on experience with automated testing tools
• Experience with performance and/or security testing is a plus