Job Description

We are looking for a detail-oriented and results-driven Manufacturing/Lifecycle Engineer to oversee the transition of validated hardware designs into mass production and address post-production challenges. The ideal candidate will work closely with manufacturing, supply chain, and support teams to ensure smooth production processes, maintain product quality, and resolve any field issues related to the product.

This role is critical to bridging the gap between design engineering and manufacturing, ensuring that products are delivered to customers with the highest standards of quality and reliability.

Responsibilities:

• Manufacturing Readiness:

· Coordinate with manufacturing teams to set up production lines for new products.

· Develop and implement manufacturing processes, test protocols, and quality standards.

· Review design documentation and BOMs (Bill of Materials) to ensure manufacturability and cost efficiency.

· Work with procurement to source components and ensure compliance with specifications.

• Production Support:

· Address and resolve issues that arise during manufacturing, such as process deviations or component availability.

· Monitor and analyse production metrics to identify areas for process improvement.

· Assist in scaling production from prototypes to high-volume manufacturing.

• Post-Production Support:

· Investigate and resolve field failures, including root cause analysis and corrective actions.

· Develop repair and rework processes for defective units.

· Provide engineering support to the customer service team for hardware-related issues.

• Quality Assurance:

· Collaborate with the quality team to establish and maintain product quality standards.

· Conduct hardware audits and inspections to ensure compliance with specifications.

· Implement changes to improve product reliability and longevity based on field data.

• Documentation and Training:

· Create and maintain documentation for manufacturing processes, test procedures, and troubleshooting guides.

· Train production and support teams on hardware assembly, testing, and maintenance.

Qualifications:

· Bachelor’s degree in Electrical Engineering, Electronics Engineering, or a related field.

· Experience in hardware manufacturing, production, or support engineering.

· Strong understanding of manufacturing processes, including SMT, PCB assembly, and testing.

· Familiarity with tools like failure analysis equipment, oscilloscopes, and multimeters.

· Experience with quality standards and certifications (e.g., ISO 9001).

· Strong problem-solving and analytical skills.

· Excellent organizational and project management abilities.

· Ability to work under pressure and meet production timelines.

Preferred Qualifications:

· Experience with hardware troubleshooting and root cause analysis in a production or field environment.

· Knowledge of ERP systems and production planning tools.

· Familiarity with regulatory compliance standards (e.g., CE, FCC, RoHS).

· Experience working with contract manufacturers and suppliers.

Responsibilities:

• Develop and optimize manufacturing processes for biotechnology products, ensuring scalability and efficiency.
• Operate and maintain bioreactors, fermenters, and other specialized equipment used in the manufacturing process.
• Conduct quality control tests and assessments to ensure compliance with regulatory standards and product specifications.
• Collaborate with cross-functional teams, including research and development, to implement process improvements and drive innovation.
• Maintain accurate documentation and records of manufacturing processes, ensuring traceability and adherence to regulatory guidelines.
• Stay updated with industry trends and advancements in manufacturing technologies and implement best practices accordingly.

Scop of the work:

• Perform activities in GXP environment. Activities including but not limited to, manufacturing operations, Commissioning & Qualification activities, any other activities as instructed by the supervisor.
• To perform and execute GXP operations independently and in accordance with Site safety standards
• To support manufacturing activities by performing verification of Automation or MES recipes
• Lead and drive manufacturing improvement initiates
• Perform update of Standard Operating Procedures and Training Procedures

Requirements:

• Min 2 years of working experience required in similar role.
• Experience in the pharmaceutical industry would be an added advantage.
• Strong knowledge of bioprocessing techniques, including fermentation, purification, and downstream processing.
• Proficiency in operating and troubleshooting bioreactors, centrifuges, chromatography systems, and other related equipment.
• Familiarity with quality control procedures and regulatory compliance in the biotechnology sector, particularly in Singapore.
• Excellent problem-solving skills and ability to work independently and in a team-oriented environment.
• Strong organizational and communication skills.

Our client is a precision engineering manufacturer with strong presence in APAC region. Due to business needs, they are now recruiting an Accountant to be part of their Accounting for ongoing transformation projects. They are located in the North Area - easily accessible.

Responsibility Accountant:

• Manage monthly, quarterly, and annual account closings, ensuring accuracy, compliance with accounting standards, and timely reporting.
• Ensure transactions comply with IFRS and support audit processes for timely sign-off.
• Handle statutory reporting, including GST, tax compliance, and transfer pricing documentation.
• Improve accounting processes, document workflows, and maintain internal control policies.
• Monitor accounts payable/receivable, safeguard funds, and ensure accurate financial records.

Requirements:

• Min Degree in Finance / Accountancy or any related field
• Minimum 3 - 5 years experience in manufacturing or similar setting is highly preferred

Interested candidates who wish to apply for the advertised position, please click APPLY NOW or email an updated copy of your resume/cv.

We regret that only shortlisted candidate will be notified.

Email Address: [email protected]

Recruitpedia Pte. Ltd.

EA License No. 19C9682

EA Reg. No. R2198636 (Oh Puey Xin)

Primary Responsibilities:

• Identify and solve engineering problems as needed
• Support manufacturing/assembly process improvement
• Responsible to uphold electrical safety standards and ensure regulatory compliance

Job Descriptions:

• Prepare and update process check sheets and manuals
• Troubleshoot technical issues and optimize system performance as needed
• Provide technical guidance and mentor Technicians
• Conduct and prepare root analysis and part defect report
• Work with Internal parties and vendor to prevent recurrence
• Liaise with R&D department for engineering change request
• Pre-inspection/inspection on MTC’s Quality Issues
• Prepare electrical inspection test sheet for test and measurement
• Evaluate and implement corrective measure on test result
• Ensure adherence to design specifications, quality standards, and safety protocols
• To carry out or perform tasks / activities, prepare and submit necessary reports to Superior from time to time

Job Requirements:

• Degree/Diploma in Electrical Engineering or equivalent
• Min 3 years experience in machine tool or automation environment
• Experience in CNC Machinery assembly process and automation will be advantageous
• A team player with a sense of responsibility and urgency
• Good interpersonal and communication skills

Company Overview:
Our client is a well-established leader in the manufacturing sector, known for their advanced production capabilities and commitment to quality. With cutting-edge facilities and a focus on innovation, they provide excellent opportunities for career growth and professional development.

Role Overview:

This role involves overseeing and optimizing the manufacturing process for the outer layer build process. The ideal candidate will ensure production equipment operates efficiently, maintain product quality, and adhere to safety and operational standards.

Key Responsibilities:

• Inspect incoming products and conduct quality checks to ensure compliance with standards.
• Operate, monitor, and shut down manufacturing equipment as needed.
• Perform routine inspections of equipment and production processes, addressing any quality or operational issues promptly.
• Maintain accurate records by completing logs and updating system inputs.
• Use line monitoring tools to oversee system performance and progress.
• Replace materials and consumables, such as filters, when required.
• Conduct tool changes and adjustments for product type transitions.
• Properly store materials and maintain optimal inventory levels.
• Set and adjust operational parameters for maximum efficiency.
• Perform scheduled equipment maintenance based on the maintenance plan.
• Operate multiple machines simultaneously if necessary.
• Prepare and manage chemical solutions required for the equipment.

Requirements:

Educational and Professional Qualifications:

• High school diploma or equivalent qualification/experience required.
• Certification in hazardous material handling is a strong advantage.
• Certification in workplace safety and health is a plus.

Specialized Skills:

• Proficiency in computer operations, including data entry and editing using MS Office (especially Excel).
• Experience with production-related systems and information management.
• Knowledge of handling chemical solutions is preferred.

Core Competencies:

• Strong adherence to operational procedures and workplace safety standards.
• Effective communication skills, particularly in reporting issues to supervisors.

Work location: Jurong West

To apply online please use the 'apply' function, with your latest resume attached.

(EA: 94C3609/R1442042)

Responsibilities:

• Lead line leaders and operators to achieve daily production targets, quality, productivity, and yield.
• Conduct daily pass-down meetings and escalate any line issues.
• Manage manpower, overtime, and consumables planning.
• Ensure adherence to manufacturing and safety procedures.
• Train and coach leaders and operators to enhance performance.
• Implement improvements to minimize human errors.
• Maintain discipline and good housekeeping in the production line.
• Collaborate with departments on projects, evaluations, and preventive maintenance in the fab.

Requirements:

• Diploma and above in Engineering or equivalents.
• Minimum 2 years of working experience in a related industry.
• Experience in high-tech, high-volume manufacturing environment is preferred.
• Strong leadership and communication skills.
• Willing to work 12-hour shifts (permanent day or night, as assigned).

______________________________________________________

HOW TO APPLY :

Interested candidates, please submit your resume by clicking on “Quick Apply” or contact [email protected] for more details.

Please provide following information in the resume for immediate processing

1) Reasons for leaving current and/or last employment

2) Last drawn and/or current salary

3) Expected salary

4) Date of availability and/or Notice Period

All applications will be treated in strictest confidence and only shortlisted candidates will be notified

Wee Wai Dan

EA License No : 03C5391

EA Reg No : R22109628

[Order Number: 670864-R]

Responsibilities

• Install, troubleshoot, and maintain equipment or systems at client sites, ensuring proper functioning and addressing any technical issues that arise.
• Provide technical support and training to clients, ensuring they are equipped to operate and maintain systems independently.
• Conduct regular site inspections, collect data, and prepare detailed reports on system performance, maintenance needs, and any recommendations for improvements or upgrades.

Requirements

• No experience candidates are welcome to apply.
• Comfortable working in a cleanroom environment and on a 24/7 standby rotation shift schedule.

We regret that only shortlisted candidates will be notified. However, rest assured that all applications will be updated to our resume bank for future opportunities.

Please kindly refer to the Privacy Policy of Good Job Creations for your reference:
https://goodjobcreations.com.sg/en/privacy-policy/

EA Personnel Name: Tan Sin Rou
EA Personnel Registration Number: R22106434
EA License no.: 07C5771

[Order Number: 671284-R]

Responsibilities

• Assist customer engineers in improving machine performance and processes.
• Develop and adjust process methods, equipment setups, and production techniques.
• Work with teams to troubleshoot issues, enhance processes, and implement automation solutions.

Requirements

No experience candidates are welcome to apply.

• Must be comfortable working in a cleanroom environment.

We regret that only shortlisted candidates will be notified. However, rest assured that all applications will be updated to our resume bank for future opportunities.

Please kindly refer to the Privacy Policy of Good Job Creations for your reference:
https://goodjobcreations.com.sg/en/privacy-policy/

EA Personnel Name: Tan Sin Rou
EA Personnel Registration Number: R22106434
EA License no.: 07C5771

Responsibilities:

• Monitor, support, maintain, and document CIM systems.
• Design, develop, maintain, and improve CIM applications and components.
• Provide Level 2 and Level 3 support for production line operations.

Requirements:

• Degree in Computer Science/Computer Engineering, or equivalents. Diploma with relevant experience acceptable.
• Minimum 2 years of experience in CIM with High Automation, MES, and SECS/GEM.
• Proficient in basic SQL (Oracle) and Java.
• Experience with Tibco (TIB/RV) or high-tech manufacturing environments is a plus.

______________________________________________________

HOW TO APPLY :

Interested candidates, please submit your resume by clicking on “Quick Apply” or contact [email protected] for more details.

Please provide following information in the resume for immediate processing

1) Reasons for leaving current and/or last employment

2) Last drawn and/or current salary

3) Expected salary

4) Date of availability and/or Notice Period

All applications will be treated in strictest confidence and only shortlisted candidates will be notified

Wee Wai Dan

EA License No : 03C5391

EA Reg No : R22109628

Note: This role will require travel and based in China and Vietnam for at least 10 months per year. Proficiency in Mandarin is essential for effective communication with Chinese-speaking clients and stakeholders.

Job Summary:

• We are seeking a talented Senior Design Quality Engineer (DQE) to lead quality initiatives for our thermal cooling solutions within the electronics and computing industry. The ideal candidate will be responsible for ensuring design and process quality while driving continuous improvements to achieve product excellence. If you are passionate about quality control, process optimization, and collaborating across functions, we encourage you to apply.

Key Responsibilities:

• Implement advanced monitoring systems to enhance product quality and yield. Identify areas for improvement and lead initiatives to optimize production processes.
• Take charge of addressing and improving abnormal quality issues in manufacturing processes. Collaborate with cross-functional teams to implement effective solutions and preventive measures.
• Strengthen internal quality control processes and improve overall capabilities, particularly in mechanical processes such as metal stamping, forging, brazing, die casting, CNC machining, and milling. Drive initiatives aimed at maximizing operational efficiency.
• Lead corrective actions for customer-reported quality issues and communicate preventive solutions to relevant stakeholders.
• Streamline quality inspection planning by integrating automation and advanced technologies whenever possible.
• Promote effective communication and coordination with design, production, and other teams to ensure adherence to quality standards.
• Manage task assignments, performance, and development of the quality team, ensuring timely completion of deliverables.

Requirements:

• Bachelor’s degree in Mechanical Engineering, Industrial Engineering, Quality Engineering, or a related field.
• Minimum of 5-7 years of experience in quality engineering, particularly in manufacturing and design quality.
• Proven experience in mechanical processes, including metal stamping, forging, brazing, die casting, CNC machining, milling, and knowledge of tooling and the design/manufacture of fixtures and jigs.
• Strong analytical, problem-solving, and leadership abilities.
• Familiarity with quality management systems and standards.
• Six Sigma certification or equivalent is a plus.
• Willingness to travel frequently and work abroad in China and Vietnam for at least 10 months per year (includes four round-trip tickets to Singapore annually and separate arrangements for living accommodations).

Responsibilities:

• Monitor, support, maintain, and document CIM systems.
• Design, develop, maintain, and improve CIM applications and components.
• Provide Level 2 and Level 3 support for production line operations.

Requirements:

• Degree in Computer Science/Computer Engineering, or equivalents. Diploma with relevant experience acceptable.
• Minimum 2 years of experience in CIM with High Automation, MES, and SECS/GEM.
• Proficient in basic SQL (Oracle) and Java.
• Experience with Tibco (TIB/RV) or high-tech manufacturing environments is a plus.

______________________________________________________

HOW TO APPLY :

Interested candidates, please submit your resume by clicking on “Quick Apply” or contact [email protected] for more details.

Please provide following information in the resume for immediate processing

1) Reasons for leaving current and/or last employment

2) Last drawn and/or current salary

3) Expected salary

4) Date of availability and/or Notice Period

All applications will be treated in strictest confidence and only shortlisted candidates will be notified

Wee Wai Dan

EA License No : 03C5391

EA Reg No : R22109628

Note: This role will require travel and based in China and Vietnam for at least 10 months per year. Proficiency in Mandarin is essential for effective communication with Chinese-speaking clients and stakeholders.

Job Summary:

• We are seeking an experienced Senior Supplier Quality Engineer (SQE) to lead quality and process optimization efforts across our supplier network, with a strong focus on mechanical processes (e.g., metal stamping, forging, brazing, die casting, CNC machining, and milling). The successful candidate will work within the electronics and computing sectors, particularly focusing on thermal cooling solutions, ensuring that our suppliers meet rigorous quality standards and process reliability. You will collaborate closely with suppliers to enhance product quality, optimize processes, and drive continuous improvement.

Key Responsibilities:

• Develop and implement systems to monitor and assess supplier quality. Ensure that materials and components, particularly those related to mechanical processes (e.g., metalworking, tooling, fixture and jig design), comply with specified standards. Address and resolve any non-conformance issues.
• Work closely with suppliers to optimize their manufacturing processes, such as metal stamping, forging, brazing, die casting, CNC machining, and milling. Drive improvements in process yield and consistency to ensure the high quality of materials and components.
• Lead the resolution of abnormal quality issues in collaboration with suppliers, focusing on root cause analysis and the implementation of corrective and preventive actions.
• Perform detailed audits to evaluate suppliers' quality management systems and process capabilities, particularly in mechanical and metalworking processes. Ensure adherence to relevant industry standards, and drive improvement actions based on audit findings.
• Work in partnership with suppliers to develop and enhance their quality processes and manufacturing practices. Ensure that their systems align with company standards, especially in the areas of tooling design and fixture/jig manufacturing.
• Collaborate with internal teams (design, production, procurement) to ensure clear communication of quality expectations and standards.
• Promote a culture of continuous improvement within the supplier network, focusing on enhancing quality management systems and manufacturing practices for metal-based components and mechanical parts.

Requirements:

• Bachelor’s degree in Engineering, Quality Assurance, or a related field.
• Minimum 5-7 years of relevant experience in supplier quality engineering or a similar role within the manufacturing or electronics industry.
• Proven experience with mechanical processes such as metal stamping, forging, brazing, die casting, CNC machining, and milling.
• Strong understanding of supplier quality management systems and industry standards.
• In-depth knowledge of metalworking, tooling design, and the manufacture of fixtures and jigs.
• Strong analytical, problem-solving, and negotiation skills.
• Experience with supplier audits, corrective actions, and continuous improvement processes.
• Six Sigma certification (or similar qualifications) is advantageous.
• Willingness to travel and based in China and Vietnam at least 10 months per year. (separate living arrangements provided, includes four round-trip tickets to Singapore annually)

Amaris Consulting is an independent technology consulting firm providing guidance and solutions to businesses. With more than 1,000 clients across the globe, we have been rolling out solutions in major projects for over a decade – this is made possible by an international team of 7,600 people spread across 5 continents and more than 60 countries. Our solutions focus on four different Business Lines: Information System & Digital, Telecom, Life Sciences and Engineering. We’re focused on building and nurturing a top talent community where all our team members can achieve their full potential. Amaris is your steppingstone to cross rivers of change, meet challenges and achieve all your projects with success.

At Amaris, we strive to provide our candidates with the best possible recruitment experience. We like to get to know our candidates, challenge them, and be able to give them proper feedback as quickly as possible. Here's what our recruitment process looks like:

Brief Call: Our process typically begins with a brief virtual/phone conversation to get to know you! The objective? Learn about you, understand your motivations, and make sure we have the right job for you!

Interviews (the average number of interviews is 3 - the number may vary depending on the level of seniority required for the position). During the interviews, you will meet people from our team: your line manager of course, but also other people related to your future role. We will talk in depth about you, your experience, and skills, but also about the position and what will be expected of you. Of course, you will also get to know Amaris: our culture, our roots, our teams, and your career opportunities!

Case study: Depending on the position, we may ask you to take a test. This could be a role play, a technical assessment, a problem-solving scenario, etc.

As you know, every person is different and so is every role in a company. That is why we have to adapt accordingly, and the process may differ slightly at times. However, please know that we always put ourselves in the candidate's shoes to ensure they have the best possible experience.

We look forward to meeting you!

ABOUT THE JOB

• Create, review, and revise cGMP documents such as batch records and SOPs.
• Create and manage change records.
• Develop technical training materials and conduct technical training for production staff.
• Support the technology transfer of new products/processes, including field testing.
• Create, review, revise, and approve technical reports and engineering documents such as URS, FS, SDS, and P&IDs.
• Design, procure, commission, and qualify new equipment.
• Work effectively as part of a team responsible for ensuring successful and efficient production processes for recombinant proteins

ABOUT YOU

• Bachelor's degree in a relevant life science field (e.g., Biology, Biotechnology, Biochemistry).
• Previous experience in a GMP-regulated environment.
• Strong attention to detail, organizational skills, and ability to work independently or in a team.
• Excellent communication skills, both written and verbal, in English.

WHY AMARIS?

At Amaris Consulting, we believe in creating a thriving, positive workplace where every team member can grow, connect, and make a real impact. Here’s what you can expect when you join our dynamic community:

• Global Diversity: Be part of an international team of 110+ nationalities, celebrating diverse perspectives and collaboration.
• Trust and Growth: With 70% of our leaders starting at entry-level, we’re committed to nurturing talent and empowering you to reach new heights.
• Continuous Learning: Unlock your full potential with our internal Academy and over 250 training modules designed for your professional growth.
• Vibrant Culture: Enjoy a workplace where energy, fun, and camaraderie come together through regular afterworks, team-building events, and more.
• Meaningful Impact: Join us in making a difference through our CSR initiatives, including the WeCare Together program, and be part of something bigger.

Equal opportunity

Amaris Consulting is proud to be an equal opportunity workplace. We are committed to promoting diversity within the workforce and creating an inclusive working environment. For this purpose, we welcome applications from all qualified candidates regardless of gender, sexual orientation, race, ethnicity, beliefs, age, marital status, disability or other characteristics.

Production Supervisor/ Manufacturing/ Mold/ Team Lead/ Engineer

Job Highlights

• Night Shift: Mon - Fri 11pm - 7am
• Permanent Position / MNC
• Location: Near Woodlands MRT
• Shift allowances, OT, AWS , Annual Leave, Medical & Dental Benefit

Our client is a global advanced precision engineering & manufacturing solutions provider.

Responsibilities:

• To assist the production Manager in leading a group of leaders, Technician, Material Handler, and operators to manage production activities to achieve daily output and quality.
• Work closely with superior to implement Production Work Order/planning.
• Ensure quality parts are produced accordingly to customer requirements.
• Ensure plan is executed accordingly and inform superior if plan is changed.
• Notify superior of inferior product quality and provide support to resolve quality issues.
• Assist to provide solutions and improvements for quality-related issues.
• Setup Mold, start up for production according to procedures.
• Ensure setting of Mold according to Moulding Data Sheet and correct cycle time
• Ensure all Work Order are closed according to Production Planning
• Provide training to upgrade staffs' skills and knowledge.
• Work closely with relevant departments to resolve quality, processes, tooling issues.

Requirements:

• Diploma or NTC2 in any Engineering-related discipline, possess good leadership, self-motivated, preferably Mechanical Engineering.
• Basic Injection moulding knowledge
• 3 years’ experience/knowledge in Manufacturing industry.
• Knowledge in ISO9001, ISO13485, is added advantage
• Basic computer knowledge i.e. MS -Excel skill is needed

Interested candidates, please e-mail resume in Word document (indicating your current salary and expected salary) to:

Joey

Recruitment Manager

Right Recruit Pte. Ltd.

10 Anson Road, #33-03, International Plaza, Singapore 079903

EA Licence No: 23C1743 | EA Reg No: R1103523

www.rightrecruit.com.sg

Job Description:
We are seeking a Manufacturing Engineer to oversee production operations in a shift work environment for a leading semiconductor MNC. The ideal candidate will lead and manage teams to meet production goals while ensuring quality, safety, and efficiency.

Responsibilities:

• Lead line leaders and operators to meet daily production and quality targets.
• Conduct daily meetings to resolve and escalate production issues.
• Plan and manage manpower, overtime, and consumables.
• Ensure adherence to manufacturing and safety protocols.
• Train and coach staff to improve performance and efficiency.
• Implement improvements to minimize errors and enhance productivity.
• Maintain discipline, cleanliness, and organization on the production floor.
• Collaborate with teams for projects, evaluations, and preventive maintenance.

Requirements:

• Experience in semiconductor manufacturing preferred.
• Strong leadership and problem-solving skills.

License No: 23S1595

Registration No: R23116355

Our client is a precision engineering manufacturer with strong presence in APAC region. Due to business needs, they are now recruiting an Accountant to be part of their Accounting for ongoing transformation projects. They are located in the North Area - easily accessible.

Responsibility Accountant:

• Manage monthly, quarterly, and annual account closings, ensuring accuracy, compliance with accounting standards, and timely reporting.
• Ensure transactions comply with IFRS and support audit processes for timely sign-off.
• Handle statutory reporting, including GST, tax compliance, and transfer pricing documentation.
• Improve accounting processes, document workflows, and maintain internal control policies.
• Monitor accounts payable/receivable, safeguard funds, and ensure accurate financial records.

Requirements:

• Min Degree in Finance / Accountancy or any related field
• Minimum 3 - 5 years experience in manufacturing or similar setting is highly preferred

Interested candidates who wish to apply for the advertised position, please click APPLY NOW or email an updated copy of your resume/cv.

We regret that only shortlisted candidate will be notified.

Email Address: [email protected]

Recruitpedia Pte. Ltd.

EA License No. 19C9682

EA Reg. No. R2198636 (Oh Puey Xin)

• Well Established Company
• Basic $4000 - $4800 + AWS + Variable Bonus
• Excellent Welfare and Benefits + Career progression
• Working location: East
• Working day: Monday to Friday
• Working hours: 8.30am to 6pm

Job Responsibilities:

• Responsible for quality issues arising from production and customer feedback, and collaborate with the production tea to address internal process issues and implement corrective actions to resolve customer complaints with proper documentation
• Implement the quality inspection standards, on incoming, in process and outgoing inspections, and provide QA inputs to production to resolve quality-related issues at in-process and final inspections
• Responsible for timely closure of Corrective and Preventive Actions (CAPA), non-conformance investigation report and customer complaints and, publish reports on quality performance
• Lead the Material Review Board (MRB) meeting involving members from production, engineering and quality departments to conduct root cause analysis, address quality issues, implement corrective actions and review its effectiveness
• Lead the team of QC inspectors in the inspection of parts for conformity in accordance with relevant drawing requirements
• Perform any other duties, as assigned

Job Requirements:

• Minimum Diploma or Degree in Precision Engineering, Quality Management or Mechanical Engineering with 2 years of working experience in quality engineering or manufacturing

Candidates are encouraged to apply this position via Apply Now button with the following information in the resume

• Work experiences and job responsibilities
• Current and Expected salary
• Reason for leaving
• Date of availability
• Education background

We regret that only shortlisted candidates will be contacted.

LIONG ZHAO GUAN (R22107632)

EA Recruitment Pte Ltd

EA License No: 21C0492

Our client is a leading global company in semiconductor and FPD production equipment.

Working Location: Woodlands
Working Hours: Monday – Friday @ 8.30am - 6.30pm

Responsibilities:

• Provide support to customers’ engineers on the development of Dry Etch process
• Develop new or modified process formulations, define processing or handling
• equipment requirements and specifications, and reviews processing techniques and methods applied in the manufacture, fabrication, and evaluation of products
• Coordinate design requirement review with appropriate engineering/scientific personnel to ensure compatibility of processing methods
• Compile and evaluate test data to determine appropriate limits and variables for process or material specifications
• Develop and plan projects involving definition and selection of new concepts, equipment automation technology, and approaches in the processing or development of new or improved processes
• Work closely with cross-functional engineering teams to troubleshoot processes and integration problems

Requirements:

• Degree in Chemical/Materials Science Engineering or its equivalent
• At least 2 years of relevant experience in the development of Dry Etch process
• Experience in Project Management will be an added advantage
• Strong communication and good interpersonal skills
• A meticulous, organized and resourceful team player
• A highly motivated individual who works independently with little supervision
• Work in a cleanroom environment

Interested candidates, please click "APPLY" to begin your job search journey and submit your CV directly through the official PERSOLKELLY job application platform - GO Mobile.

We regret to inform you that only shortlisted candidates will be notified.

By sending us your personal data and curriculum vitae (CV), you are deemed to consent to PERSOLKELLY Singapore Pte Ltd and its affiliates to collect, use, and disclose your personal data for the purposes set out in the Privacy Policy available at https://www.persolkelly.com.sg/policies. You acknowledge that you have read, understood, and agree with the Privacy Policy.

PERSOLKELLY Singapore Pte Ltd

• RCB No. 200007268E

• EA License No. 01C4394

• Registration No. R23112260 (MayThinKyu)

· Review & upgrade existing automated production lines via root cause analysis for continuously improvement to meet production new requirement.

· Create, prepare, update automation project documentation, procedures & drawings of Gantt chart, weekly progress report, process / equipment flow chart, validation list, buy off/FAT/SAT (Factory / Site Acceptance Test) procedure, mechanical assembly & layout drawing, electrical diagram & wiring, I/O list, co-robot & PLC program, SOP (Standard Operation Procedure), WI (Work Instruction) & PM (preventive maintenance) check list.

· Attention to details of design concepts, provide most cost-effective technical solutions in line with customer and company needs.

· Update & back up automation system documentation, procedures, drawings, software, co-robot & PLC programming timely.

· Coordinate with internal team (BD, QC, production, maintenance) and external supplier to make projects successful.

· Prepare machines preventive maintenance check list and training operation & maintenance staffs. Service & troubleshooting machines when requested.

· Adhere to plant safety, food safety, sanitation standards and following all GMP guidelines.

· Take reasonable care of workplace health and safety; abide by all EHS policies and procedures; cooperate with Management and colleagues in EHS initiatives

· Collaborates with suppliers and machine maker to complete all FAT and SAT requirements within the delivery date.

· Perform Lean principle (5S, Gemba-walk, 5-why and B&A suggestion improvements)

· Any other duties when assigned by management

Requirements:

· Diploma / Degree of Engineering in Automation / Mechatronics / Mechanical / Electrical or equivalent.

· Previous 3-6 years’ experience as a validation engineer or in a similar role.

· Strong understanding of automation engineering system design concept & development, manufacturing processes and safety regulations.

· Excellent mathematical and analytical skills. Attention to detail.

· Knowledge of statistical software analysis (e.g., MINITAB, MATLAB)

· Well versed in Microsoft office tools (Excel/ Word / Power point)

· Have knowhow in Process Failure Mode Effect Analysis (PFMEA) and CPK study.

· Attention to details and eager to learn new technology.

· Location: Pioneer/Joo Koon| Mondays to Fridays (8:30am to 5:45pm)

· Monthly salary x 13 + Variable Bonus. Monthly salary will commensurate according to experiences

We invite interested and qualified candidates to send in your updated resume (MS Word Format), stating your reasons for leaving each employment, your current and expected salary to [email protected] and cc [email protected]. Please indicate the position you are applying in your email subject. Your interest will be treated with strict confidentiality,

We regret to inform that only shortlisted candidates will be notified

EA License: 90C3627

EA Reg No: R1108020

Highlights

• West
• US MNC + Basic + AWS
• Mon - Fri 8:30am - 5:05pm
• Company transport provided

RESPONSIBILITIES:

• Lead and coordinate development and launch of new products & line extension projects.
• Work closely with internal (Sales, Operations, Quality and Research) and external (Customer’s & vendor’s) teams to ensure products align with customer requirements.
• Establish & manage project schedules and timelines, cost estimates of product & project. Prepare budget plans for management approval.
• Coordinate with the manufacturing team to ensure smooth product handoffs and transitions into production. Work with process Engineering & operation team to develop process flow and operational needs, setting up product lines and capacity review.
• Develop and oversee prototype sample builds & validate design concepts. Develop and coordinate test requirements and validations with QA team, internal & external analytical labs as required.
• Create drawings, specifications, test plan, bills of materials and other engineering documentation.
• Assist in developing new suppliers, qualification of materials and material planning for launch of new products.
• Recommend and implement product improvements to enhance performance, reduce cost, and productivity. Lead continuous improvement projects as assigned.
• Additional duties as assigned by Supervisor.

REQUIREMENTS:

• BS Degree in Engineering (Mechanical or Chemical preferred)
• Successfully manage multiple projects with minimum supervision.
• 3-5 years’ experience in product development & Project management with cross functional teams
• Excellent technical & interpersonal skills, resourceful and team player.
• Data driven & ability to work under tight deadlines.
• Strong problem solving & analytical skills, excellent communication and technical reporting skills.
• Ability to learn new technology, processes, and systems quickly.
• Working knowledge of MS Office, MS Project & Solid works

HOW TO APPLY:

Interested applicants, please email to “[email protected]”.

We regret only shortlisted candidates will be notified.

Important Note: Trust Recruit Pte Ltd is committed to safeguarding your personal data in accordance with the Personal Data Protection Act (PDPA).
Please read our privacy statement on our corporate website www.trustrecruit.com.sg.

Trust Recruit Pte Ltd
EA License No: 19C9950
EA Personnel: Pierre Chung Yih Shern
EA Personnel Reg No: R22111092

Responsibilities:

• Collaborating with Process Engineer & Engineering team to establish QC standards.
• Creating documentation for inspection criteria and quality plans.
• Collaborating with QA, Process, and Product teams to address quality issues through corrective action.
• Conducting in-process audits and final quality control audits with the Process team.

Requirements:

• Diploma in Manufacturing/Quality Engineering or equivalents.
• Minimum 1 year of working experience in Electronics Manufacturing Industry.
• Responsible for controlling Supplier Quality Assurance (SQA).
• Oversight of quality control for incoming, in-process, and outgoing products.
• Knowledgeable in ISO 9001, 14001, 13485, and 45001, and FDA requirements.
• Understanding IPC requirements in PCB assembly and quality standards for various manufacturing processes such as plastic molding, die casting, extrusion, metal stamping, and machining parts.

_______________________________________________________

HOW TO APPLY :

Interested candidates, please submit your resume by clicking on “Quick Apply” or contact [email protected] for more details.

Please provide following information in the resume for immediate processing

1) Reasons for leaving current and/or last employment

2) Last drawn and/or current salary

3) Expected salary

4) Date of availability and/or Notice Period

All applications will be treated in strictest confidence and only shortlisted candidates will be notified

Wee Wai Dan

EA License No : 03C5391

EA Reg No : R22109628

DeltaV Batch Engineer - Pharmaceutical Manufacturing

Responsibilities

• Perform day-to-day tasks related to DeltaV Batch programming, configuration, and support.
• Collaborate with cross-functional teams to design, develop, and implement new batch systems.
• Provide technical assistance during system testing and commissioning.
• Troubleshoot and resolve issues related to DeltaV Batch applications and systems.

Qualifications

• Please note that this role is for a Consulting firm.
• Bachelor’s degree in Engineering, Computer Science, or a related field.
• 5+ years of experience in a similar role in Pharmaceutical industry, focusing on projects or operations.
• Experience in programming, configuration, and support of DeltaV Batch systems.
• Knowledge of batch control strategies, control modules, sequences, state models, and unit procedures.
• Proficiency in troubleshooting and resolving issues related to DeltaV Batch applications and systems.
• Strong analytical and problem-solving skills.
• Excellent communication and collaboration abilities.
• Ability to work effectively in a team environment.
• Familiarity with 21 CFR Part 11 and GMP regulations is a plus.
• DeltaV Batch certification is also advantageous.

License No: 23S1595

Registration No: R23116355

Our Client is in the Manufacturing Industry. Due to their current expansion plan, they are looking for a Manufacturing and Production Engineer to join their team, in hopes of developing the current high performing team. They are located in the West.

Responsibilities

• Offer continuous technical support to contract manufacturers, resolving electronic engineering issues encountered during production.
• Work closely with manufacturers to establish and uphold rigorous quality control standards, ensuring reliable and consistent product performance.
• Analyze manufacturing workflows to identify and implement process improvements that boost efficiency and productivity.
• Address and resolve electronic engineering challenges to prevent production delays and minimize defects.
• Collaborate with design and development teams to implement design enhancements that improve product quality and streamline manufacturability.
• Coordinate investment audits with cross-functional teams, conduct regular physical asset inspections, and assist with annual inventory checks as needed.
• Any ad-hoc duty as given

Requirement

• Min Bachelor's degree in Electronic Engineer or a related field
• Min 4 years in EMS - Electronic device assembly
• Good understanding in overall supply chain, manufacturing technology, process set-up, process validation and SOP support
• Knowledge and experience in manufacturing, planning, quality, SAP, PLM
• Knowledge and experience in wearable electrical device's assembling
• Comfortable to travel overseas often

Interested candidates who wish to apply for the advertised position, please click APPLY NOW or email an updated copy of your resume/cv.

We regret that only shortlisted candidate will be notified.

Recruitpedia Pte. Ltd.

EA License No. 19C9682

EA Reg. No. R21103987 (Yan Yongmao)

Job Summary

Lab Executive independently performs advanced level laboratory functions with competence and minimal supervision. Support the Technology Department through all stages of product development and testing.

Reporting: Senior Laboratory Executive

Role and Responsibilities

1. Ensure all Lab Job Ticket assigned are performed accordingly and completed on time.

2. Independently and competently performs assigned tasks in a prioritized, logical, and timely manner in agreement with company laboratory and safety procedures with competence and minimum supervision

3. Tests in accordance with specifications provided.

4. Perform all core function/testing required by this position.

5. Assists in reviewing & writing of SOPs and standard test methods.

6. Enter test data and conditions into the lab system and can assemble into a simple report.

7. Capable of conducting internal R&R.

8. Troubleshoot lab equipment issues with assistance from M&E/ equipment vendor.

9. Prepare testing report

Job Requirements:

• Diploma in Chemical Engineering / Chemical Process Technology

• 3 year of related work experiences.

• Work experience in Manufacturing environment will be preferred

• Good understanding of manufacturing safety and 5S

5 days work week , 2 shift rotating by week

7am - 3pm

3pm - 11pm

Our client who is a global Engine Manufacturing player is seeking an Executive Leadership role to be based in Singapore. The incumbent will be responsible for overseeing all aspects of the company’s overall strategy across P&L management, corporate governance and day-to-day operations of the business.

Roles & Responsibilities:

• Develop strategic plans to advance Company's growth.
• Provide leadership and direction to management team to implement and attain the business objectives
• Drive daily operations to consistently meet key performance targets
• Establish a clear and compelling organisational vision, drive alignment with mission and long-term goals
• Grow existing and develop new revenues stream to promote long-term sustainable growth and profitability for the organization.
• Identify and drive M&A opportunities to grow the business.
• Ensure that the organization and its missions, programmes, branding and services are consistently presented in a strong, positive image to the stakeholders.
• Any other duties as assigned by the Management from time to time.

Required Skills & Abilities:

• Strong stakeholder management skills with prior experience in a JV
• Possess excellent leadership, interpersonal, negotiation and influencing skills.
• Ability to successfully communicate strategy and proposals to internal and external stakeholders.
• Good executor with proven track-records.
• Senior level management experience in the industry and in a listed Company is preferred.
• Strong Corporate Finance and M&A experience.

Education & Experience:

• Degree/Master in Business Management or related field or MBA.
• Minimum 15 years of manufacturing experiences, preferably in automotive industry and with exposure to EV technology
• At least 5 years in a Senior Leadership position
• Knowledge or experience in diesel engine would be an advantage.
• Bilingual in English and Chinese as you will liaise with English and Chinese speaking stakeholders.

Reg No. R1980434
BeathChapman Pte Ltd
Licence no. 16S8112