Location: Jurong East

Working hours - Mon – Fri, 8.30am – 5.30pm

Requirements

• Handling of equipment for military and security (eg Chemical Detector, Radiation detector, Biological Detection Systems for Military , Acoustic Hailing Equipment / System etc)
• IT software installation and configuration.
• Handling enquiries on products such as post-sales delivery of equipment
• Carry out maintenance,diagnostic analysis, trouble shooting and repair work for equipment.

Requirements

• Higher Nitec / Diploma in Electrical & Electronics Engineering with min 5 years relevant experience
• Experience in customer relations.
• Able to do Stand-by duty if required

To Apply or find out more information on this role, please email us or send in your updated resume to: [email protected]

Shelly Tan Bee Leng (Reg. No. R2199458)

STAR CAREER CONSULTING PTE LTD (EA License: 20C0353)

• Analyse problems, perform troubleshooting and track problems through resolution.
  Responsible for monitoring activities, such as network and bandwidth usage.
• When necessary, escalate problems to the appropriate stakeholders/principals.
• Ensure the generation and management of support tickets according to SLA requirements.
• Schedule and run periodic maintenance for network infrastructure at the data centre.
• Plan and manage change requests and/or maintenance activities for network operations, including firmware patches.
• Ensure zero service level breaches and achieve 100% compliance with policy and procedure.
• Perform Change Requests and Service Requests as assigned by the team lead according to the SLA.
• Manage Cisco routers and switches and perform firmware patching on network equipment.

Requirements:

• Degree/Diploma in Computer Science, Computer Engineering, or equivalent; however, consideration will be given to experience and certifications in lieu of a degree.
• Minimum of 3 years of experience working as a network engineer within the operational environment.
• Good grasp of technical skills (network).
• Must possess CCNA/CCNP certification.
• 5 day week at AMK area (Data Centre environment)

Maestro HR

damien lee tian hong

R1106726

16C8462

Responsiblities:

• Perform quality checks on structural, architectural and ensure that the design and construction works comply with all the relevant statutory acts, regulations and practices
• Conduct site inspections, supervise and check the works to ensure smooth progression and timely completion of quality works according to CONQUAS requirement
• Monitor the performance of the workers for all trades and ensure any defects are rectified
• Implement QA/QC procedures
• Ensure safety & compliance of work on site
• Monitor & coordinate project progress
• Control of materials, etc.

Requirements:

• Degree in Building / Civil Engineering or related discipline
• At least 3 years experience in relevant field
• Able to work in Jurong Island
• Good interpersonal and communication skills
• Mon to Sat (Ability to work beyond normal working hours)

Responsiblities:

• Perform quality checks on structural, architectural and ensure that the design and construction works comply with all the relevant statutory acts, regulations and practices
• Conduct site inspections, supervise and check the works to ensure smooth progression and timely completion of quality works according to CONQUAS requirement
• Monitor the performance of the workers for all trades and ensure any defects are rectified
• Implement QA/QC procedures
• Ensure safety & compliance of work on site
• Monitor & coordinate project progress
• Control of materials, etc.

Requirements:

• Degree in Building / Civil Engineering or related discipline
• At least 3 years experience in relevant field
• Able to work in Jurong Island
• Good interpersonal and communication skills
• Mon to Sat (Ability to work beyond normal working hours)

Job Description

To conduct laboratory tests (using e.g. electrodynamic shaker and temperature/humidity chambers) in accordance with the test procedure.

To direct the test operator on the operation of test equipment (e.g. electrodynamic shaker and temperature/humidity chambers) to meeting the test requirement [NOTE: There are several laboratories which the technician is required to make (approximately 10 trips) to these laboratories every quarter.

To liaise with equipment designers by coordinating the date/time to perform functional checks on Product Under Test.

To perform visual inspections of Product Under Test before and after tests in accordance with visual inspection checklist.

To inform customer on any test anomaly to discuss on follow-up action required.

To provide records of test and visual inspection results.

To perform mechanical drafting & design works.

Requirements

• Higher NITEC / Diploma in Mechanical Engineering

• ESS/PDU/GD&T experience will be advantageous but not essential

• Able to work independently with minimum supervision

Working Hours

The working hours are as follows:

Mondays to Thursdays: 8:30am to 6:00pm

Fridays: 8:30am to 5:30pm

Lunch: 1 hour

• Prepare quality reports, perform process audit, develop & implements quality assurance standards, policies, processess & controls.
• Able to liaise & resolve with customers on quality related issues.
• Data compliation, co-ordination and facilitation of all internal and external audits, re-certification of ISO 9001.

Responsibilities:

· Coordinating, planning and conducting the project plan

· Project formulation and monitoring progress and schedule

· Effective communication and co-ordination between project participants

· Attend site meeting, inspect, monitor and report project progress.

· Submit and update monthly project status

· Perform other duties or tasks as assigned by immediate superior or Project Manager

Requirements:

· Degree in Civil/Structural Engineering or its equivalent

· At least 3 years relevant working experience as Project Engineer in main contractor office

· Proficient in MS Office Word, Excel and Project Scheduling software

· Bilingual with good communication skills

Piping CAD Engineer for a Marine Offshore & O&G company:

Our client’s principal activities are to provide Clients with Full Turkey Project Management. This includes engineering, project management through the pre-construction planning, critical path development, construction / fabrication / site management, commissioning and hand over. They are looking for a Piping CAD Engineer.

Job Highlight

· Permanent role| 5.5 days’ work week

· Competitive compensation benefits

· Good career advancement opportunities

· Conductive & friendly working environment with cultural diversity

Role & Responsibilities

Responsibilities

· Create shop drawings based on client given information, specifications, calculations and drawing to incorporating all details of shop drawings

· Make the drawings in keeping with company standards

· Provide MTO based on drawing details

· Read P&ID drawings, update as-building (e.g., redline)

· Maintain all drawing files, update drawings as needed, and make corrections to drawings as directed by the Section Head/ Leads

· Explain drawings to production or construction teams and provide adjustments as necessary

Requirements

· Degree/Diploma in Engineering (Naval Architecture / Marine and Offshore / Mechanical / Electrical Engineering)

· Minimum 3 years of experience in Marine or Oil & Gas industry in the same field

· Spoolgen experience and expertise in HVAC design

· Knowledge and experience with HVAC (Design) systems

· Able to read P&ID drawings, update as-built (e.g., redline)

· Must have hands on knowledge on AutoCAD

· Good time management and able to work under pressure

Job Related Information

Permanent - 5.5 days’ work week | Monday-Friday 8am-5pm, Saturday 8am-12pm

Office Location: 59 Gul Circle| Singapore 629354

Salary & Benefits

· Monthly Basic Salary: Based on expertise, academic qualification and skills

· OT pay entitlement: OT Flat rate S$8/- per hour

· Healthcare benefits such as Outpatient, Dental, Health Screening etc.

· Cover with insurances, Personal Accident, Hospital & Surgical, Term Life and Work Injury policy

· Variable Bonuses

· 14 days Annual Leave and 14 days sick leave

· Birthday leave / Festival eve half day leave

· NTUC membership – Applicable for only Permanent confirmed staff

· Company transport is available @ various pick-up points

NB

· NO QUOTA FOR THE FOREIGNERS PLEASE.

· This job vacancy is posted on the My Career Future Jobs Bank portal, which is only for the Singaporeans and Singapore PRs.

Please contact our Recruitment Manager: Leeza Shaheed (R1770675) for further enquiries about the role@ [email protected]

Venture Cove Pte Ltd| EA License 21C0547

65 Chulia Street, #46-00 OCBC Center, Singapore 049513

LinkedIn: http://www.linkedin.com/in/venture-cove-681891249/

Website: http://www.venture-cove.com/

Please apply here: https://talent.sage.hr/jobs/b0aa80ab-6951-4717-b49e-37ac3c199206

Applicants will need to include a Cover Letter and CV with publication list.

Applications will be reviewed on a rolling basis, with final submission 20 January 2025.

We are particularly looking for Machine Learning Research Engineers with the following backgrounds:

- Generative Modelling (particularly LLMs and multi-Agent systems)

- Data science

- High-performance Computing

- Data-driven personalised healthcare

- Model-based personalised healthcare (e.g. pharmokinetic modelling)

- Translational and regulatory expertise in medical devices

As a Machine Learning Research Engineer, the successful candidate will contribute to the programme by developing and implementing novel machine learning algorithms with focus on security and data privacy, as well as translating recent AI advancements to the healthcare setting.

Imperial College London and Nanyang Technological University (NTU) are seeking Research Engineers and Research Fellows to join the exciting new Imperial/NTU CYber Protection for HEalthcaRe (IN-CYPHER) research programme on the cybersecurity of connected medical devices and systems.

The successful candidates will join the research programme which represents a collaboration between the United Kingdom and Singapore and will be based at the newly established Imperial Global Singapore (IGS) housed within the unique CREATE campus.

Positions will be initially for 2 years fixed term (subject to 6-month probation) with potential for extension.

Informal enquiries are greatly welcome. You are encouraged to send an e-mail to Dr Viktor Schlegel, Deputy Programme Director [email protected], together with an indication of the specific position you would like to apply for.

Questions about the recruitment process, should go to Paige Noyce, Associate Director [email protected].

Positions are based in Singapore at Imperial Global Singapore at the National Research Foundations Campus for Research Excellence and Technological Enterprise (CREATE) located on the campus of the National University of Singapore.

Our client is a precision engineering manufacturer with strong presence in APAC region. Due to business needs, they are now recruiting a FP&A Analyst to be part of their FP&A team for ongoing transformation projects. They are located in the North Area - easily accessible.

Responsibility FP&A Analyst:

• Support the development of the annual budget and quarterly forecasts.
• Build financial models to forecast performance under different scenarios.
• Track budget performance, analyze variances, and explain discrepancies.
• Prepare financial reports on a monthly, quarterly, and annual basis for management review.
• Analyze financial data to uncover trends, risks, and opportunities.
• Design and maintain dashboards and key performance indicators (KPIs) for various business units.
• Help establish specialized FP&A business partnerships, including areas like Commercial Finance, Production Costing, and R&D Finance.
• Identify and implement process improvements in financial reporting and analytics.

Requirements:

• Min Degree in Finance / Accountancy or any related field
• Minimum 3 - 5 years experience in FP&A from manufacturing or similar setting
• Proficient in Financial Modelling

Interested candidates who wish to apply for the advertised position, please click APPLY NOW or email an updated copy of your resume/cv.

We regret that only shortlisted candidate will be notified.

Email Address: [email protected]

Recruitpedia Pte. Ltd.

EA License No. 19C9682

EA Reg. No. R2198636 (Oh Puey Xin)

Our client is specialized in the production and distribution of disposable medical devices.

• Perform technical support for daily manufacturing operation.
• Ensure all equipment are well maintained.
• Assists in machine and equipment improvement and upgrade.

Requirements:

• Nitec in Engineering or equivalent
• At least 3 years of troubleshooting equipment failure and handling technical issues experience in cGMP manufacturing environment.

If you are keen to apply for the position, kindly email your detailed resume in MS Word to [email protected]

Please note that only shortlisted candidates will be notified.

For more job opportunities, please visit our website at www.recruit-expert.com

EA Licence: 19C9701

Registration: R1326740

We are developing and executing a shared strategic vision for Loyalty & Marketing Services platforms and products that enable Visa to be the world-leading data-driven payments company. As a Data Engineer, you will be part of world-class team of Engineers to define, drive and execute on this vision. We are looking for a self-motivated individual with software engineering skills and expertise with Java, Web technologies & Big data. The candidate will be extensively involved in hands-on activities including POCs, design, development, testing, and documentation. Candidate must be flexible and willing to switch tasks based on team's needs.

Primary responsibilities will include:

• Design and develop mission-critical systems, delivering high-availability and performance
• Work on development of new products and enhancements to existing systems iteratively by building quick POCs and converting ideas into real products
• Work closely with architects, business and technical stakeholders to develop high quality products and services that meet business requirements and expectations while applying the latest available tools and technology
• Instill best practices for software development, and deliver high quality work on tight schedules
• Identify opportunities for further enhancements and refinements to standards and processes
• Coordinate Continuous Integration activities, testing automation frameworks, and other related items in addition to contributing core product code
• Present technical solutions, capabilities, considerations, and features in business terms. Effectively communicate status, issues, and risks in a precise and timely manner

This is a hybrid position. Hybrid employees can alternate time between both remote and office. Employees in hybrid roles are expected to work from the office 2-3 set days a week (determined by leadership/site), with a general guidepost of being in the office 50% or more of the time based on business needs.

Skillset : Azure, Professional, Cyber Security Governance, Risk & Co

• Familiar working with Microsoft Azure
• Day to day security monitoring on the Azure security alerts, DSM alerts and any other custom alerts related to security.
• Day to day operation of administration and support on Microsoft Cloud Defender, Logs Analytics Workspace, Network Security Groups and Azure Trend Micro Cloud One
• Incident management and resolution, raising tickets to Microsoft and Trend Micro to support and rectify any problems.
• Software upgrade of TrendMicro Cloud One to remediate any vulnerabilities and to get the most out of security administration enhancement
• Support on the vulnerability management in GCC to recommend the mitigation actions to the system OIC and GCC infra
• Conduct queries on the log analytic to support cyber proactive investigation as per Cyber needs.
• Some Knowledge of scripting , az cli, PowerShell , KQL and Logic Apps is advantageous

• Progressing all elements of design in-line with the Design Checklist;
• Prepare electrical tender packages including specification and drawings;
• Responsible for ensuring to remain familiar with current practices and engineering trends within the industry and to remain technically competent
• Tendering and estimating of electrical works for projects prior to award
• Compilation and Review of Operation and Maintenance Dossier for Projects
• Ensuring the System Supervisor is provided with the current shop and space management drawings, specifications, approved technical submittals and all approved changes in scope;
• Ensuring the System Supervisor is fully briefed on the awarded scope of work, the tender technical documents and all contractual revisions to tender documentation;
• Evaluating technical submittals for specification and client requirement compliance;
• Approving Test Packs at each step of construction through to completion;
• Forwarding testing and commission passing criteria to the System Supervisor.

Elsa Fontanne (CEI No. R24124496)

Recruitment Consultant

Contact Number: 67860100

Email Address: [email protected]

Recruit Express Pte Ltd / EA Licence No: 99C4599

We regret only shortlisted candidates will be contacted

• In-house Support IT
• Support and maintain WAN/LAN network links and equipment's
• Administration of the Servers
• Support and maintain the Firewall System
• Fault diagnosis and resolution of software and system errors on the desktop
• Fault diagnosis of desktop hardware and co-ordination of repairs and replacements
• Software installation and decommissioning of desktop hardware
• Outdoor / Onsite Project Support for IT Related Products
• Interactive Panel Firmware update
• Network Devices Firmware update
• IP configuration of network devices
• Support Product Preventive Maintenance
• Any other task assign by Superior

About your role

• Serve as the technical expert and trusted advisor to manufacturing customers around automation solutions.
• By applying subject matter expertise, you build and maintain client relationships and solve their complex automation challenges.
• Collaborate with sales and technical team members to help identify, progress, and close commercial opportunities.
• Develop sales processes and build relationships with stakeholders to design and offer solution that solve customer pain points.
• Attractive commissions will be awarded.

Requirements

• Experience in robotic engineering and simulation work is preferred.
• Strong understanding of robotics and automation related products.
• High willingness to learn and take ownership.
• Ability to effectively communicate product value propositions, negotiate commercial contracts, and close deals.
• Comfortable with travelling internationally for work.
• Ability to take initiative and self-manage to achieve key objectives and company KPIs.

Responsibilities

· Design and lead development of solutions to meet business requirements

· Drive standardization and best practises during implementation of solutions

· Ownership of technical designs, code development, and component test execution to demonstrate alignment to the functional specification

· Lead and collaborate with cross-functional teams to define, design, and deliver new features

· Create and maintain configuration documents

· Contribute to strategy and roadmap planning of applications

· Explore and evaluate new technologies to complement our existing solutions

· Lead discussions and workshops to identify and clarify business requirements and work closely with stakeholders to optimize and propose alternate solution when required

· Troubleshoot and resolve issues with partners

· Ownership of technical designs, code development, and component test execution to demonstrate alignment to the functional specification

Requirements

· Bachelor or higher degree in Computer Science or IT.

· Proven track record of successful project/product implementation with minimal 15 years of software development experience

· Minimum 3 years’ experience with Microservices, Event driven architecture

· Minimum 10 years’ experience developing backends or APIs on Spring Framework

· Good OO-skills. Must demonstrate strong familiarity of design patterns

· Strong knowledge of REST, JSON, XML, WSDL, ODATA

· Experience in SQL and NoSQL Database design, preferably with Oracle

· Experience in API Management and API Documentation

· Proficient with TDD, MVVM, SOLID principals

· Strong communication skills, for collaborating across different stakeholders

· Self-starter with strong sense of project ownership, able to work through deadlines and meet time constraints

· Lead workshops and serve as technical lead for project delivery

Shortlisted candidates will be offered a 9 months agency contract employment.

Licence no: 12C6060

We are looking for a Software Engineer proficient in Java/ SpringBoot.

• Work on the latest Web3.0 technologies and gain exposure to the FinTech Industry.
• Salary package up to $7,000 + AWS + VB (~2 months).
• Hybrid work arrangement.

Responsibilities:

• Develop, test, deploy, and maintain business applications and systems integrations..
• Collaborate with other software engineers, business analysts and software architects to plan, design, develop, test, and maintain business applications built.
• Ensure best practices are used throughout the software development life cycle.
• Understand the inter-dependencies of the services (application, system and database) and able to pin-point problem areas accurately to improve overall efficiency.
• Adhere to high-quality development principles while delivering solutions on-time.

Requirements:

• Degree in Computer Science or equivalent.
• Experience developing web application, Web Forms, micro services and Enterprise Workflows for the FinTech industry.
• Exposure and experience in working with cloud solution delivery.
• Min. 3 years experience in systems analysis, design, programming with knowledge of Java/J2EE, JSP, JSF, Spring Framework (Security, MVC, Cloud, Boot).

Interested candidates may click on apply or apply via email to [email protected] (indicating Job ID J51303 for faster processing).

By submitting your resume, you consent to the collection, use, and disclosure of your personal information per ScienTec’s Privacy Policy (scientecconsulting.com/privacy-policy).

This authorizes us to:

• Contact you about potential opportunities.
• Delete personal data not required at this application stage.
• To withdraw consent, email [email protected].

All applications will be processed with strict confidence. Only shortlisted candidates will be contacted.

Lee Wen Ying (Mattias) - R23112909

ScienTec Consulting Pte Ltd - 11C5781

Capacity Planning Engineer

Smart IMS is a leading provider of information technology solutions, offering a wide range of services to businesses worldwide. With a strong focus on innovation and customer satisfaction, we help organizations streamline operations, improve efficiency, and achieve their strategic goals.

We are currently looking for a Capacity Planning Engineer to forecast sufficient vendor resources for Hosting and Network Services partners.

Responsibilities:

- Develop automation for reporting needs.

- Responsible to Work Queue status reporting and Capacity Reporting

Requirements:

- Proficient in Capacity Planning

- Familiar with report automation

Additional Information:

- Location: HarbourFront

- Working hours: Monday to Friday, 9 am to 6 pm.

- Competitive salary commensurate with experience, with 14 days of Annual Leave and above market medical coverage / insurance.

- Start off as a 1-year contract with 2 months' notice period.

Site Engineer

• Working Days: Monday - Saturday
• Working Timing: 0830am - 530pm
• Office Location: Kranji
• Salary range: S$ 2,500 - 3,500

Responsibilities

Project Management

• To resolve all technical and non-technical issues during the project lifecycle.
• To ensure the tracking and monitoring of items per contractual requirement.
• Responsible for submission and monitoring of technical drawings, method statements and proposals.
• To ensure construction meeting client & regulatory requirements.
• To carry out short-term planning to meet site progress.
• To co-ordinate, program and monitor site work, materials, plant & equipment.
• Carry out project objectives to align with company goals.
• Minimize material wastage on-site and maximize machinery/equipment usage.
• To control the allocated direct workforce effectively i.e. no. of direct workers and overtime etc.
• Follow approved construction method that is cost effective, productive & without compromising on Quality.
• Achieve targeted progress of works to ensure the intended cash flow.

Technical Understanding

• Fully understand project drawings and scope of work.
• Understand the implications of different technical choices so as to meet the project objectives.
• Involving in providing value engineering solutions basing on his knowledge.
• To have knowledge in the preparation of engineering project proposals and method statements.

Requirements

• Candidate must possess at least Degree in Engineering (Civil) or equivalent (Recognized by PEB).
• Versed in PUB(WRN) projects with more than 5 Year(s) of working experience in the related field is an advantage

Apply now for Interview arrangement

Daniel Wong | Senior Consultant | Reg No: R2095781

The Supreme HR Advisory Pte Ltd | EA No: 14C7279

Key Responsibilities:

1. Middleware Management:

• Install, configure, and manage Red Hat Middleware products such as JBoss EAP, Fuse, and AMQ.
• Troubleshoot middleware issues and optimize performance for reliability and scalability.
• Collaborate with application teams to ensure seamless middleware integration and deployment.

2. DevOps Practices:

• Promote best practices in Continuous Integration/Continuous Deployment (CI/CD) pipelines and Infrastructure as Code (IaC).
• Collaborate with cross-functional teams to streamline workflows and improve overall efficiency.

3. Incident Management:

• Respond promptly to incidents and outages, ensuring timely resolution and root cause analysis.
• Participate in on-call rotations and provide after-hours support as required.

Qualifications:

1. Experience:

• 3–5 years of hands-on experience with OpenShift, Ansible, and Red Hat Middleware.

2. Technical Skills:

• Proficiency in scripting languages such as Python and Bash.
• Expertise in configuration management tools and CI/CD platforms.
• Strong background in Linux administration and networking.

3. Certifications:

• Red Hat certifications such as RHCSA and RHCE are required.

4. Soft Skills:

• Excellent problem-solving and troubleshooting abilities.
• Strong communication, collaboration, and interpersonal skills.

Our client is a leading startup in the semiconductor field and a leader in designing ultra low-power microprocessors. The Singapore office houses the Product Development (PD) team which will be working on projects.

Staff Engineer, RTL Design

Responsibilities:

We are seeking a talented RTL Engineer to join our team in Singapore. As an RTL Engineer, you'll ensure the highest quality products by developing and implementing robust methodologies. Work alongside a talented team of engineers to deliver innovative solutions that meet the evolving needs of our customers.

Responsibilities

• Own and be responsible for pre-tape out quality for digital SOC modules on the MCU

• Explore architecture and develop micro-architecture.

• RTL development for IPs and SOCs using Verilog

• 3rd party IP identification, selection, and integration

• Collaboration with verification and FPGA teams in test plan development and debug

• Collaborate with the Physical Design team to close the design on timing and power targets

• Assist in silicon bring-up and validation;

• Run tool for quality checks (LINT, CDC, and RDC) and fix/waive the issues

Requirements

• Bachelor’s degree in Electronics Engineering, Electrical Engineering, Instrumentation & Control Engineering, or a related field, plus 5-8 years of experience.

• Possess deep and broad knowledge of current and emerging SOC design technologies.

• Have expert knowledge in designing, implementing, and troubleshooting IPs and SOC

• Demonstrate a deep understanding of customer needs and the competitive landscape.

• Ability to estimate the impact of and help plan and lead the implementations and have a positive impact on the entire output

• Can architect and guide programs across the full range of technical areas.

Interested applicants, kindly send in a copy of your updated resume in WORD document to [email protected] stating your current and expected remuneration together with notice period required to current employer.

You can also contact Vincent Low for a confidential discussion at 6749 4236.

EA Personnel Registration No: R1324700

Job Description:

· Overseeing the daily site activities and progress, planning, implementation and monitoring work schedules in accordance with the master and detailed work programmes.

· Coordinate with different departments concerning the site work activities.

· Work closely with sub-cons, highlight any work-related matters for team's discussion and solutions.

· Supervise works on-site for proper work execution and safety.

· Handle any engineering/technical issues.

· Prepare daily progress reporting and maintain records that are up to date.

Requirement:

· Minimum a Diploma / Degree in Civil Engineering or equivalent.

· Able to work independently with minimal supervision under tight schedule.

· Meticulous and good communication.

Responsibilities:

• Assist Project Manager in monitoring and managing the day-to-day operations of project
• Liaise with consultants and /or sub-contractors on the project matters
• Attend meetings with owner/client/contractors/sub-cons on the project related matters
• Check drawings and raise technical queries to resolve the discrepancies in between drawings and as well as those arisen during the project execution
• Carry out in-progress inspection and joint inspection and to ensure that the works were executed to the required quality standard
• Update the project quality plan as and when appropriate
• Assist Project Manager on the tasks assigned

Requirements:

• Candidate must possess at least Bachelor's Degree/professional Degree in Engineering (Civil) or equivalent
• At least 5 year(s) of working experience in the related field is required for this position
• Preferably Seior Executive Specialized in Engineering- Civil/Construction/Structural or equivalent.

Workplace: Ang Mo Kio

Job Desciption:

• Execute full software development lifecycle
• Develop existing programs by analyzing and identifying areas for modification
• Integrate software components into a fully functional software system
• Develop software verification plans and quality assurance procedures
• Document, write operational documentation and maintain software functionality
• Deploy programs and evaluate feedback
• Comply with project plans
• Maintain and improve existing codebases and peer review code changes
• Provide a detailed level of technical assistance to the customers
• Support customers by responding within the designated SLA
• Investigate and troubleshoot issues, developing solutions for customers while understanding their needs
• Perform impact analysis and coordinate implementation
• Carry out routine maintenance work
• Troubleshoot, debug and upgrade existing systems
• Maintain systems by monitoring and correcting software defects

Requirements:

• Ability to document requirements and specifications
• Proficiency in troubleshooting software issues and debugging a large codebase
• Proficent in Java development

To Apply or find out more information on this role, please email us or send in your updated resume to: [email protected]

Shelly Tan Bee Leng (Reg. No. R2199458)

STAR CAREER CONSULTING PTE LTD (EA License: 20C0353)