SSMC (Systems on Silicon Manufacturing Company Pte. Ltd.), is a Joint Venture between NXP and TSMC. We offer flexible and cost effective semiconductor fabrication solutions by maintaining fully equipped SMIF cleanroom environment, 100% equipment automation and proven wafer-manufacturing processes.

At SSMC, every career journey is unique and rewarding. We're looking for innovative, passionate, and talented people like you to join our team.

We're searching for Principal Engineer to be part of our Diffusion WET diverse team of talents. You will be responsible for daily operations in the Diffusion WET Equipment modules.

What you will be working on:

• Perform corrective & preventive maintenance on equipment to maintain good quality & productivity performance.
• Provide 24×7 support for troubleshooting equipment & problem solving in Factory operations floor.
• Maintain documentations for equipment installation, maintenance and troubleshooting procedures for reference purposes.
• Develop continuous improvement to enhance equipment reliability and cost of ownership.
• Drive innovation in factory automation, processes and systems to improve productivity.
• Coordinate, supervise & develop a team of high performance equipment engineers.

More about you:

• Degree in Chemical/Electrical & Electronics/Materials/Mechanical/Microelectronics/Physics or equivalent
• Minimum 3 years working experience in WET equipment or related module
• Highly motivated & strong team player
• Possesses good communication and interpersonal skills
• Quality 1st mindset & strong analytical, problem solving skills

SSMC is committed to equal employment opportunities and abides by the Tripartite Guidelines on Fair Employment Practices (TGFEP). All qualified applicants will receive non-discriminatory consideration for employment on the basis of merit and regardless of age, race, gender, religion, marital status and family responsibilities, or disability, or any other attributes as protected by the relevant laws.

SSMC (Systems on Silicon Manufacturing Company Pte. Ltd.), is a Joint Venture between NXP and TSMC. We offer flexible and cost effective semiconductor fabrication solutions by maintaining fully equipped SMIF cleanroom environment, 100% equipment automation and proven wafer-manufacturing processes.

At SSMC, every career journey is unique and rewarding. We're looking for innovative, passionate, and talented people like you to join our team.

We’re searching for an Senior/ Associate Engineer to be part of our Facilities diverse team of talent. You will trouble-shoot and service normalization on systems in charge such as buildings issues, lifts etc.

What you will be working on:

• Trouble-shoot and service normalization on systems in charge such as buildings issues, lifts, plumbing and sanitary, landscaping and housekeeping work
• Perform scheduled preventive maintenance (PM) and system breakdown maintenance (BM)
• Perform 1st line incident handling, breakdown repair works as well as actively participate in incident
• Perform inspection rounds on 6S and supervision of contractor works on building services
• Ensure that all quality expectations are up held to meet better than expected customer request
• Create and innovate new methods for continuous improvement to current Procedures to attain best in class quality and cost
• Participate in Improvement teams to enhance system improvements
• Maintain good housekeeping in all buildings, ensure good safety practice and also safe custody of keys, tools, documentation, equipment and other properties belonging to the company
• Ensure all site safety compliance are met as part of daily responsibility and expectations
• Continuously seek to enhance on existing safety procedures for continuous improvement
• Plan, lead and supervise work carried out by vendors
• Provide leadership in first line of trouble shooting of any process inadequacy

More about you:

• Candidate must possess a Diploma or Advanced/Higher/Graduate Diploma in Engineering (Material Science), Engineering (Mechanical), Engineering (Electrical/Electronic), Engineering (Environmental/Health/Safety), Engineering (Industrial) or equivalent
• At least 2 year(s) of working experience in the related field is required
• Added advantage for candidate(s) with experience working in Large Industrial Complex, Semiconductor environment
• Resourceful and has initiative
• Willing to work on rotating shift

SSMC is committed to equal employment opportunities and abides by the Tripartite Guidelines on Fair Employment Practices (TGFEP). All qualified applicants will receive non-discriminatory consideration for employment on the basis of merit and regardless of age, race, gender, religion, marital status and family responsibilities, or disability, or any other attributes as protected by the relevant laws.

SSMC (Systems on Silicon Manufacturing Company Pte. Ltd.), is a Joint Venture between NXP and TSMC. We offer flexible and cost effective semiconductor fabrication solutions by maintaining fully equipped SMIF cleanroom environment, 100% equipment automation and proven wafer-manufacturing processes.

At SSMC, every career journey is unique and rewarding. We're looking for innovative, passionate, and talented people like you to join our team.

We’re searching for an Engineer to be part of our Manufacturing diverse team of talent. You will be responsible for supervising and coordinating production activities to meet daily and monthly manufacturing goals.

What you will be working on:

• Supervise and coordinate production activities to meet daily and monthly manufacturing goals through the efficient use of manpower, material, and machine; together with proficient methodologies, in a hazardous-free and healthy working environment.
• Plan, strategize and monitor the movement of WIP for maximum throughput, minimum idle time and maintain line linearity.
• Solicit Engineering support to ensure tight focus on areas and variance requiring immediate attention.
• Resolve and handle line-related issues / preventive maintenance and to understand all equipment capacities / constraints so as to identify, handle and resolve bottleneck situations.
• Mentor and train all Manufacturing Leaders and Assistants to develop skills required for efficient MFG operations.
• Execute improvement programs in manufacturing operations in his/her Section.
• Facilitate and participate in quality, productivity and cost reduction improvement.
• Ensure safety, discipline and housekeeping compliance by all personnel and take actions on violators.
• Ensure proper documentation and data-integrity.
• Perform shift duties to support production, as required by Section Manager.

More About You:

• Degree in Science or Engineering
• Preferably 1-3 years relevant wafer fab manufacturing experience.
• Candidates with no experience will be considered for junior role, training will be provided
• Interest in Wafer Fabrication Manufacturing
• Possess leadership quality
• Good interpersonal skills
• Team player
• Good analytical and planning skills

SSMC is committed to equal employment opportunities and abides by the Tripartite Guidelines on Fair Employment Practices (TGFEP). All qualified applicants will receive non-discriminatory consideration for employment on the basis of merit and regardless of age, race, gender, religion, marital status and family responsibilities, or disability, or any other attributes as protected by the relevant laws.

SSMC (Systems on Silicon Manufacturing Company Pte. Ltd.), is a Joint Venture between NXP and TSMC. We offer flexible and cost effective semiconductor fabrication solutions by maintaining fully equipped SMIF cleanroom environment, 100% equipment automation and proven wafer-manufacturing processes.

At SSMC, every career journey is unique and rewarding. We're looking for innovative, passionate, and talented people like you to join our team.

We’re searching for a Senior Engineer to be part of our IT Department diverse team of talent. You will be responsible to Engineering Analytic Systems Software development, Design and Support.

What you will be working on:

• Responsible for system design, development and support of the application systems.
• Work closely with users, vendors and internal team for system requirement analysis, effort estimation, design, development, implementation and testing on IT application project.
• Responsible for core Software Development and deliver in timely manner
• Managing and develop of Engineering Data Analysis Systems
• Managing and develop Engineering data tracks
• Managing and develop DataMart and data warehouse applications
• Implement Service Request related to internal applications
• Provide support for Internal IT department and External customers

More About You:

• Candidate must possess at least a Diploma or Bachelor's Degree or Professional Degree in Computer Science/ Engineering/ Information Technology or equivalent
• Minimum 3 years of relevant experiences in Microsoft .Net Platform C#.Net and python.
• Minimum 3 years of relevant experiences in MS SQL Server, Oracle, Stored Procedure, Function, Trigger and etc.

SSMC is committed to equal employment opportunities and abides by the Tripartite Guidelines on Fair Employment Practices (TGFEP). All qualified applicants will receive non-discriminatory consideration for employment on the basis of merit and regardless of age, race, gender, religion, marital status and family responsibilities, or disability, or any other attributes as protected by the relevant laws.

Responsibilities:

• Drive a people-centric transformation by mentoring, coaching, and developing the production team. Encourage a mindset of growth, innovation, and resilience, ensuring the team is adaptable and responsive to change.
• Oversee the production budget, actively identifying and pursuing opportunities to optimize costs and improve financial performance.
• Implement robust shop floor control systems to ensure transparency, governance, and efficiency.
• Lead the assessment and implementation of automation initiatives within production to enhance efficiency, quality, and scalability within the agreed budgets.
• Develop and monitor KPIs related to automation success, cost savings, and production efficiency, leveraging data to make informed decisions and adjustments.
• Champion a culture of continuous improvement, utilizing Lean, Six Sigma, and other methodologies to streamline processes and reduce waste.
• Facilitate workshops, training sessions, and regular communications to inspire and motivate the team towards embracing new technologies, methodologies, and ways of working.
• Create an environment that supports team collaboration, problem-solving, and proactive risk management.
• Ensure compliance with all safety, quality, and regulatory requirements, particularly in the adoption and integration of new automation technologies.

Prerequisites:

• Minimum 5 years of experience in a production management role, with proven experience in transforming a production environment.
• Demonstrated leadership skills with the ability to manage, inspire, and develop a diverse production team through significant organizational changes.
• Strong understanding of Lean, Six Sigma or similar methodologies. Familiarity with shop floor control approaches and implementation.
• Excellent communication, interpersonal, and motivational skills, with an ability to foster a positive, engaging, and innovative work environment.
• Fluent in both English and Mandarin.
• Experience with shop floor control methodologies and a strong analytical approach to problem-solving and decision-making.
• Commitment to upholding the highest standards of safety and quality.

Next available intake: August 2024

Responsibilities:

• Assembly of Robots
• Configuration & testing of devices and sensors used in Robotics applications
• Support on Application Test Program and Hardware Development before release
• Run R&D tests and Factory Acceptance Tests for products
• For relevant components serial numbers registration
• Basic troubleshooting for robots in production floor area
• Documentation on SOPs, test procedure
• Any other ad-hoc duties assigned

Requirements:

• Undergraduate/Diploma in Mechatronics, Electrical or Mechanical Engineering

SSMC (Systems on Silicon Manufacturing Company Pte. Ltd.), is a Joint Venture between NXP and TSMC. We offer flexible and cost effective semiconductor fabrication solutions by maintaining fully equipped SMIF cleanroom environment, 100% equipment automation and proven wafer-manufacturing processes.

At SSMC, every career journey is unique and rewarding. We're looking for innovative, passionate, and talented people like you to join our team.

We’re searching for an Associate Engineer to be part of our Thin Film Process (CVD) department diverse team of talent.

What you will be working on:

• Support the running of production in the modules and ensure that process integrity for machines is in place for production
• Assist Engineers in the fine tuning of processes for production
• Assist in trouble-shooting process related issues and minimize the time lots are on hold
• Monitor qualified process using SPC and other statistical tools
• Assist in implementing process improvement projects
• Assist new Technicians/Assistants on their On-The-Job-Training (OJT) by acting as their buddy
• Participate in QIT programs to improve productivity and output quality of the Module
• Create job-files for metrology tools for production set-up, and housekeeping of files
• Maintain good housekeeping in the production area, ensuring good safety practice and also safe custody of tools, equipment and other properties belonging to the Module

More About You:

• NITEC / ITC / NTC in Electrical / Electronics / Mechatronics / Mechanical/ Microelectronics or related field of study
• Willing to work on shift
• Good Team Player

SSMC is committed to equal employment opportunities and abides by the Tripartite Guidelines on Fair Employment Practices (TGFEP). All qualified applicants will receive non-discriminatory consideration for employment on the basis of merit and regardless of age, race, gender, religion, marital status and family responsibilities, or disability, or any other attributes as protected by the relevant laws.

SSMC (Systems on Silicon Manufacturing Company Pte. Ltd.), is a Joint Venture between NXP and TSMC. We offer flexible and cost effective semiconductor fabrication solutions by maintaining fully equipped SMIF cleanroom environment, 100% equipment automation and proven wafer-manufacturing processes.

At SSMC, every career journey is unique and rewarding. We're looking for innovative, passionate, and talented people like you to join our team.

We’re searching for a EQUIPMENT ENGINEER to be paart of our ETCH DEPARTMENTdiverse team of talent. You will be responsible for equipment preventive maintenance and equipment performance indices.

What you will be working on:

• Establish systems/guidance in sustaining and improving all equipment performance indices to meet operations goals.
• Perform shift duties to support the running of Production in the Module and ensure equipment readiness and worthiness for production when requested.
• Perform scheduled equipment preventive maintenance (PM), calibration and troubleshoot equipment-related problems on a timely basis to minimize equipment downtime.
• Conduct installation and hook-up of new equipment.
• Perform task with zero error.
• Establish work procedures, corrective actions and preventions
• Oversee the preparation of consumables/preventive maintenance parts to ensure adequate provision.
• Participate in continuous improvement programs to improve productivity and output quality of the Module, and constantly monitor and feedback to the team to improve performance of equipment to meet Module objectives.
• Assist in implementing and managing process improvement projects.
• Ensure good housekeeping and safety practices in the Fab.
• Safe custody of tools, equipment and other properties belonging to the Module.
• Initiate, organize, develop and lead task-force for short term problem solving and long term continuous improvement.

More About You:

• Degree in Electrical / Electronics / Mechatronics / Mechanical/ Microelectronics or equivalent
• 2-5 years semiconductor wafer fab experience as an Equipment Engineer
• Engineering knowledge, which may include semiconductor devices theory, electronics, electrical/ pneumatic/ hydraulic control system, digital principle, wafer fabrication processes, pump and vacuum system and electrical wiring system
• Familiar with TEL Unity DRM/ ME+ Platform and Dry Strippers
• Good Team Player
• Good Analytical & Problem-Solving skills

SSMC is committed to equal employment opportunities and abides by the Tripartite Guidelines on Fair Employment Practices (TGFEP). All qualified applicants will receive non-discriminatory consideration for employment on the basis of merit and regardless of age, race, gender, religion, marital status and family responsibilities, or disability, or any other attributes as protected by the relevant laws.

SSMC (Systems on Silicon Manufacturing Company Pte. Ltd.), is a Joint Venture between NXP and TSMC. We offer flexible and cost effective semiconductor fabrication solutions by maintaining fully equipped SMIF cleanroom environment, 100% equipment automation and proven wafer-manufacturing processes.

At SSMC, every career journey is unique and rewarding. We're looking for innovative, passionate, and talented people like you to join our team.

We’re searching for a MANAGER to be part of our FACILITIES DEPARTMENT diverse team of talent. You will be the Subject-Matter-Expert for the Operation & Maintenance.

What you will be working on:

• Lead the operation section in Facilities to provide 24 hours operational support in wafer fabrication
• Lead the team to maintain and operate Facilities Centre (FC) systems
• Provide guidance to team members, ensure smooth facilities operations and resolve technical issues
• Manage Computerised Maintenance Management System (CMMS), ensure system owners perform all the maintenance function as required
• Manage 12-hour shift duties to provide 24 hours facilities support to Fab to ensure continuous and smooth operation
• Coach, mentor and train fellow on technical know-how to ensure department technical competencies are up to the highest standard
• Formulate and implement operating procedures and preventive maintenance programs for systems to ensure that the systems function as intended at all times
• Monitor and review system performance and capacity usage to ensure continuity of operations with zero disruptions
• Manage appointed shift leaders to perform shift handover, planning & allocation of daily tasks to shift members, generation of system performance & weekly utility consumption reports
• Review, recommend and implement changes to workflow to achieve company and department goals in relation to cost saving and operational improvement
• Working closely with Operations and Quality team ensuring optimal plant performance

More About You:

• Master/ Degree in Electrical / Mechanical / Electronic Engineering
• Min 10 years of relevant experience in Semiconductor Wafer Fab environment
• Strong Functional / Technical Skills and Knowledges in Mechanical, Electrical, Cleanroom and Control Systems

SSMC is committed to equal employment opportunities and abides by the Tripartite Guidelines on Fair Employment Practices (TGFEP). All qualified applicants will receive non-discriminatory consideration for employment on the basis of merit and regardless of age, race, gender, religion, marital status and family responsibilities, or disability, or any other attributes as protected by the relevant laws.

SSMC (Systems on Silicon Manufacturing Company Pte. Ltd.), is a Joint Venture between NXP and TSMC. We offer flexible and cost effective semiconductor fabrication solutions by maintaining fully equipped SMIF cleanroom environment, 100% equipment automation and proven wafer-manufacturing processes.

At SSMC, every career journey is unique and rewarding. We're looking for innovative, passionate, and talented people like you to join our team.

We’re searching for a MECHANICAL ENGINEER to be part of our FACILITIES DEPARTMENT diverse team of talent. You will be responsible for HVAC systems, Clean Room, Building services and maintenance.

What you will be working on:

• To provide facilities support pertaining to Clean Room, Chillers and HVAC systems, Environmental Protection Systems, Process Utilities Supply Systems, Building Services and Maintenance, and other miscellaneous mechanical and facilities systems to wafer fabrication so as to ensure continuous supply of utilities and related facilities at the required performance level or specifications
• Formulate, implement, review and improve preventive and predictive maintenance programs for systems in charge so as to ensure that the systems function as intended at all times
• Carry out repair and troubleshooting of systems in order to restore systems to their operating conditions in the shortest possible time. Carry out root cause analysis and implement action plans to prevent recurrence
• Able to formulate effective reporting and tracking systems for monitoring of system performance and capacity usage. Recommend and implement improvement/enhancement projects where appropriate.
• Formulate, implement, review and improve operating procedures so as to ensure optimum operation of systems
• Monitor and review utility consumptions and work with users to implement projects to reduce the consumption where possible
• Knowledge of all relevant standards, legislations, codes of practice etc and ensure their compliance
• Provide guidance and training on the systems in charge to fellow colleagues so as ensure adequate working knowledge and system backup
• Ensure plant histories, drawings, data and other appropriate documentations are being generated and properly filed for future reference and review.
• Evaluate and recommend appropriate spares, consumables and other resources necessary for the day-to-day operation of the systems.
• Conduct project supervisions.

More About You:

• Master / Degree in Science, Mechanical Engineering, Building or equivalent. Preferred candidate with SCEM certification.
• 5 years of relevant working experience in semiconductor, pharmaceutical or petrochemical industry. Hands-on experience in day to day operation and maintenance essential.
• Experienced in managing cleanroom (Class 100 environment) systems
• Person shall act as SME for ACMV system. Person must have sound knowledge of operation and maintenance of Clean room areas and ACMV system
• Provide building services and maintenance, including building facilities repair and upgrading, housekeeping, landscaping and pest control.
• Knowledge of maintenance principles and good engineering practices.

SSMC (Systems on Silicon Manufacturing Company Pte. Ltd.), is a Joint Venture between NXP and TSMC. We offer flexible and cost effective semiconductor fabrication solutions by maintaining fully equipped SMIF cleanroom environment, 100% equipment automation and proven wafer-manufacturing processes.

At SSMC, every career journey is unique and rewarding. We're looking for innovative, passionate, and talented people like you to join our team.

We’re searching for an Engineer to be part of our Automation & System Department diverse team of talent. You will be responsible to setup, configure and provide operation support to PROMIS system.

What you will be working on:

• Investigate, analyze production line operation issue, develop solution to system related problem.
• Develop technical or training material as required.
• Involve in user/vendors discussion and brainstorming session.
• Analyze requirements, design, develop and test, implement, optimize.
• Document design specifications, user acceptance test and release.
• Analyze and implement improvement opportunity to enhance PROMIS system in support of business strategy.
• Provide cross-functional leadership (for senior position) and vendor interaction to troubleshoot, analyze and develop solution for problem involving integrated systems.
• Provide training to enable 1st line support equipped with appropriate knowledge/skill to provide frontline operation support for production.

More about you:

• Degree in Electronic Engineering, Computer Science, Information Technology or equivalent fields
• Familiar with dot.net
• Familiar with SECS / GEM Protocol will be advantage
• Database knowledge (SQL commands, data accessing etc.)
• Familiar with SDLC (Software Development Life Cycle) process will be advantage
• Good communication and self-driven

SSMC is committed to equal employment opportunities and abides by the Tripartite Guidelines on Fair Employment Practices (TGFEP). All qualified applicants will receive non-discriminatory consideration for employment on the basis of merit and regardless of age, race, gender, religion, marital status and family responsibilities, or disability, or any other attributes as protected by the relevant laws.

SSMC (Systems on Silicon Manufacturing Company Pte. Ltd.), is a Joint Venture between NXP and TSMC. We offer flexible and cost effective semiconductor fabrication solutions by maintaining fully equipped SMIF cleanroom environment, 100% equipment automation and proven wafer-manufacturing processes.

At SSMC, every career journey is unique and rewarding. We're looking for innovative, passionate, and talented people like you to join our team.

We’re searching for a Manager to be part of our Facilities Department diverse team of talent. You will be the Subject-Matter-Expert for the Operation & Maintenance.

What you will be working on:

• To manage Cost Center budgets for Capex projects, expenses and headcounts including planning reviewing, tracking & reporting. Responsible for monitoring and controlling budgets within control limits.
• To manage facilities systems expansion & optimization projects:
  • Perform role of Project Manager to plan, lead, executing, monitoring, controlling and manage projects.
  • Lead and guide the mechanical team to execute the projects to meet project requirements and objectives.
  • Regular reporting to management.
• To manage facilities system operation:
  • Together with system owner keeping track of system operation to ensure system running smoothly with good PM management.
  • Perform problem solving, incident reporting, contracts renewal, parts tracking & ordering, bills & invoice verification and energy consumption reporting.
• To manage the team members performance review and appraisal
  • To mentor & coach the team to meet their annual goals and KPI.
  • Provide training and guidance to team member to improve their performance.
• To be the consultant and facilitator to solve complex problems
  • Execute analytical approaches to provide expert opinions.
  • Promote collaborative team work among team members.
• To manage compliance and maintain performance standards
  • Work as role model to ensure self and team to obey all compliances.
  • Setup & maintain good project plan, operation procedures and quality standards.

More About You:

• Min. Degree holder preferable in Mechanical / Electrical & other engineering.
• Min. 10 years in similar capacity and working experience in semiconductor manufacturing plants in facilities management.
• Ability to work on multiple tasks concurrently
• Self-motivated and able to work independently under high pressure and fast work environment.
• Certified Energy Manager (preferably)
• Knowledge and experience in mechanical / electrical / control system installation.
• Knowledge and experience in energy reduction project management.
• Experienced in semiconductor plant facilities project and hook-up works management.
• Experienced in CMMS software to manage all plant equipment listing, maintenance & work order follow-up.
• Possess excellent paperwork skills such as Power point preparation & presentation.
• Possess strong data gathering and data analysis capability with good excel worksheet & formula preparation & presentation skills.
• Possess good working skills to draft SOP, Operating Procedures & Maintenance Checklist etc.

SSMC is committed to equal employment opportunities and abides by the Tripartite Guidelines on Fair Employment Practices (TGFEP). All qualified applicants will receive non-discriminatory consideration for employment on the basis of merit and regardless of age, race, gender, religion, marital status and family responsibilities, or disability, or any other attributes as protected by the relevant laws.

SSMC (Systems on Silicon Manufacturing Company Pte. Ltd.), is a Joint Venture between NXP and TSMC. We offer flexible and cost effective semiconductor fabrication solutions by maintaining fully equipped SMIF cleanroom environment, 100% equipment automation and proven wafer-manufacturing processes.

At SSMC, every career journey is unique and rewarding. We're looking for innovative, passionate, and talented people like you to join our team.

We’re searching for an Engineer to be part of our Industrial Engineering department diverse team of talent. You will be responsible for supervising and coordinating production activities to meet daily and monthly manufacturing goals.

What you will be working on:

1. To achieve operation targets to meet company objectives throug
   1. Capacity: Support equipment capacity improvement/verification.
   2. Productivity: Support equipment productivity improvement.
   3. Cost: Support cost management people productivity activities.
2. Capacity check (demand/wafer start alignment) & equipment performance reporting.
3. Fab layout expansion plan & coordinate layout change activities.
4. Ensure timely equipment installation/release for production to meet operation’s needs.
5. Identify/Initiate/Track process equipment productivity improvement activities.
6. Update/maintain equipment capacity/productivity/cost database for capacity planning, productivity indices and cost tracking.
7. CAPEX planning/tracking/reporting to meet company objectives.
8. Weekly new part ID standard costing and execution.
9. Operations cost tracking/reporting.
10. People productivity support/coordination (thru automation/workflow simplification).
11. Records update & management

More About You:

• Degree in Industrial Engineering/ Mechanical/Manufacturing
• Knowledge of wafer fabrication procees, equipment configurations, layout planning, capacity planning & WPH, as well as semiconductor process flow
• Familiar with C+
• Strong communication and presentation skills
• Team player with strong problem solving skills

SSMC is committed to equal employment opportunities and abides by the Tripartite Guidelines on Fair Employment Practices (TGFEP). All qualified applicants will receive non-discriminatory consideration for employment on the basis of merit and regardless of age, race, gender, religion, marital status and family responsibilities, or disability, or any other attributes as protected by the relevant laws.Maintain and improve capacity planning methodologies to ensure accuracy

Responsibilities

• Responsible for attending the customer complaints and develop resolution
• Responsible in planning and coordinating with the Production on non-conformance product screening as well as conducting containment measures and minimizes DMR issued by customers
• Responsible for providing engineering support to Internal Departments related to quality and technical issues

Requirements

• Min Degree in Mechanical Engineering or its equivalent
• Min 1 years of working experience in process or fixture designs

Please kindly email your resume in Ms Word to [email protected]

We regret to inform that only shortlisted candidates would be notified.

Registration Number: R1328870

EA License No. 22C1026

Responsibilities

• Responsible for designing new products and processes
• Responsible in identifying areas for improvement, maintaining high levels of manufacturing and product quality
• Responsible for ensuring cost-efficiency and conformance with regulatory standards.

Requirements

• Min Degree in Electrical & Electronics/ Mechanical/ Electromechanical/ Mechatronics/ Optics and Photonics Engineering or relevant
• Min 2 years of working experience in manufacturing/ production industry
• Experience in optics/ lasers/ optical microscopic imaging/ multi-channel fluorescence system used in analytical equipment is an added advantage.
• Experience in using multi-meter, function generator and oscilloscope.

Please kindly email your resume in Ms Word to [email protected]

We regret to inform that only shortlisted candidates would be notified.

Registration Number: R1328870

EA License No. 22C1026

Responsibilities

• Responsible for performing preventive maintenance and calibration of the machines according to the checklist
• Responsible in analysing machine problems and repair
• Responsible for updating and maintaining maintenance records and forms regularly

Requirements

• Min Nitec in Electrical Engineering
• Min 2 years of working experience in maintenance and repair of CNC metal cutting machines
• Knowledge in PLC will be advantage

Please kindly email your resume in Ms Word to [email protected]

We regret to inform that only shortlisted candidates would be notified.

Registration Number: R1328870

EA License No. 22C1026

Responsibilities

• Responsible for setting and operating CNC Machines
• Responsible for performing preventative maintenance on product equipment
• Responsible for performing other duties as and when required

Requirements

• Min Nitec in Engineering
• Min 1 years of working experience in Precision/ CNC Manufacturing Industry

Please kindly email your resume in Ms Word to [email protected]

We regret to inform that only shortlisted candidates would be notified.

Registration Number: R1328870

EA License No. 22C1026

Responsibilities

• Responsible for designing and developing software for automated semi-conductor process equipment.
• Responsible for improving equipment performance through CIPs and other development initiatives
• Responsible for supporting field work to upgrade and resolve customer issues.

Requirements

• Min Diploma in Electrical & Electronics Engineering/Computer Studies or equivalent.
• Min 5 years of working experience in programming on Windows (XP and above) environment.
• Experience in C++, VC++, MFC, SQL, OOP, using Servo, Stepper Motion Controller, Analog Device and High Speed I/O
• Knowledge in developing multi-threaded control software, SEMI SECS/ GEM equipment connectivity standard and Software Development Life Cycle.

Please kindly email your resume in Ms Word to [email protected]

We regret to inform that only shortlisted candidates would be notified.

Registration Number: R1328870

EA License No. 22C1026

Responsibilities

• Responsible for designing and developing windows applications in .net technologies mostly used for manufacturing equipment
• Responsible for developing solutions to improvise performance & scalability of systems
• Responsible in full system development life cycle
• Responsible for conducting applications training and handle enquiries for technical issues
• Responsible for supporting on site installation, debugging and hand technical support

Requirements

• Min Diploma in Information Technology or related
• Min 2 years of working experience in C#, C++, .Net
• Experience in developing windows Based application

Please kindly email your resume in Ms Word to [email protected]

We regret to inform that only shortlisted candidates would be notified.

Registration Number: R1328870

EA License No. 22C1026

Responsibilities

• Responsible for designing and developing windows applications in .net technologies mostly used for manufacturing equipment
• Responsible for developing solutions to improvise performance & scalability of systems
• Responsible in full system development life cycle
• Responsible for conducting applications training and handle enquiries for technical issues
• Responsible for supporting on site installation, debugging and hand technical support

Requirements

• Min Diploma in Information Technology or related
• Min 2 years of working experience in C#, C++, .Net
• Experience in developing windows Based application

Please kindly email your resume in Ms Word to [email protected]

We regret to inform that only shortlisted candidates would be notified.

Registration Number: R1328870

EA License No. 22C1026

Responsibilities

• Responsible for providing customer support for Equipment Products with regard to Installation, Training and Field Service via on-site visits, Phone, Internet Media and email

Requirements

• Min Diploma in Engineering
• Min 3 years of working experience in machine service experience
• Overseas Travelling is required

Please kindly email your resume in Ms Word to [email protected]

We regret to inform that only shortlisted candidates would be notified.

Registration Number: R1328870

EA License No. 22C1026

Responsibilities

• Responsible for supporting new product development, new product introduction and cost out designing for existing product lines through sound execution of engineering principles and processes
• Responsible in interfaces with design engineering in coordinating the release of new products.
• Responsible for estimating manufacturing cost, determines time standards, and makes recommendations for tooling and process requirements of new or existing product lines.

Requirements

• Min Degree in Electrical / Electronics / Mechatronics / Mechanical/ Microelectronics / Chemical Process Technology
• Min 5 years of working experience in Manufacturing Industry

Please kindly email your resume in Ms Word to [email protected]

We regret to inform that only shortlisted candidates would be notified.

Registration Number: R1328870

EA License No. 22C1026

Responsibilities

• Responsible for analysing, troubleshooting and resolving stamping issues to achieve productivity, quality and cost targets.
• Responsible in assisting in stamping tool design reviews for new product development
• Responsible for establishing process capability, optimum parameter setting, mill cost, Bill of Material (BOM) and work instruction for dies and processes.
• Responsibel in identifying and proposing cost reduction program and upgrading to achieve quality and competitive cost to meet present and future stamping requiremen
• Responsible for providing technical guidance and training to juniors technicians and toolmakers

Requirements

• Min Nitec in Production/ Manufacturing/ Mechanical Engineering/ Tool and Die Making
• Min 5 years of working experience in Stamping Industry

Please kindly email your resume in Ms Word to [email protected]

We regret to inform that only shortlisted candidates would be notified.

Registration Number: R1328870

EA License No. 22C1026

Responsibilities

• Responsible for improving manufacturing process and equipment capability to achieve higher production yield and quality
• Responsible in driving cost reduction programs through continual improvement activities
• Responsible for supervising plating technicians and operators in meeting manufacturing requirement

Requirements

• Min Degree in Chemical Engineering/ Mechanical Engineering or relevant
• Min 2 years of working experience in plating industry

Please kindly email your resume in Ms Word to [email protected]

We regret to inform that only shortlisted candidates would be notified.

Registration Number: R1328870

EA License No. 22C1026

Responsibilities

• Responsible for managing and leading Engineering Team
• Responsible for leading the team to identify and reduce waste, improve process time utilization and cost reduction initiatives to increase manufacturing productivity
• Responsible for timely and accurate completion of manufacturing routing for turn- key production work order

Requirements

• Min Diploma in Mechanical Engineering, Manufacturing or other relevant discipline
• Min 3 years of working experience in Precision/ Machining/ CNC Manufacturing Industry

Please kindly email your resume in Ms Word to [email protected]

We regret to inform that only shortlisted candidates would be notified.

Registration Number: R1328870

EA License No. 22C1026