Job Description:

• Responsible for the execution of the Static Equipment Integrity Coordination scope of work, focusing in the Integrity Management Process of the equipment controlled by the MODEC's Own Service of Equipment Inspection,predictive maintenance, process performance and condition monitoring, quality assurance and quality control of subcontractors, and development and improvement of preventive and predictive maintenance plans, in order to ensure and maximize assets reliability, availability, maintainability, safety and integrity (RAMSI), as well as contributing to the Operations procedures and results achievement, established for the business.
• Support the MdB's corporate annual budget planning (expenses and investments), by providing information based on previous experiences, technical knowledge, and best practices of the market.
• Contribute to continuous improvement of IMS by following up and filling in projects status and updating and monitoring the implementation of IMS Documents under Static Equipment Integrity Coordination and maintaining the equipment master list updated.
• Participate in risk analysis workshops and safety reviews to contribute with Integrity engineering expertise and support the Operations team.
• Contribute to the attendance to the maintenance and equipment inspection policies, regarding to the Reliability Engineering, by applying the guidelines and lessons learned from the Technical management.
• Monitor process safety barriers' KPIs and provide technical recommendation, when necessary, to ensure the
• effectiveness of process safety barriers to maintain the facility's operation within ALARP level. Furthermore, it is extremely important to ensure the verification of the safety devices as safety valves, rupture discs, flare, etc., based on written procedures, in order to ensure safe condition for operation of equipment.
• Elaborate technical recommendations or actions plans to meet the Operations needs and feedbacks of the Technical management, Fleet maintenance support, subcontractors, and Operations areas.
• Contribute to effective planning and monitoring of shutdown and decommissioning (equipment and offshore unit) plans by defining the shutdown scope (equipment list, NDT exam, tests, measurements, replacements, repairs, or modifications to be carried out) related to controlled equipment, through legal compliance and integrity evaluation.
• Organize the activities related to NR 13 / SPIE together with the Equipment Inspectors from the Offshore Units, by including files and documentation, such as official books, calibration certificates, internal and external inspections, inspection reports, hydro-test and carrying out audit in the manufacturers.
• Ensure the proper register of all Pressure Vessels, PSV, Boilers and all others static equipment by developing datasheets and inspections reports and filling in the integrity management software (SGI) with reliable and updated data on this equipment.
• Contribute to fleet performance improvement by constantly cooperating with other Tiers and Modec entities, to absorb and apply all lessons learnt from other Unit Phases (Commissioning, Operation, Maintenance, Decommissioning) for the new vessels in construction, as well as provide new lessons learnt and improvement opportunities discovered during the Pre-Ops project.
• Sporadic follow ups in the shipyard during the Construction Phase and visits to vendors' factories might be required for these activities.

Qualifications & Experience:

• Bachelor's degree of Mechanical or Naval Engineering is required for SPIE.
• CREA is required. Certification as Welding Inspector (SNQC) IS-N2 is a competitive edge.
• Engineer JR: 2 years of overall experience is expected. Previous experience in Offshore/Onshore Oil & Gas area is a competitive edge. Previous experience in integrity management, implementation / maintenance of SPIE and ISO certificates, and failures analysis is a competitive edge. Previous experience as part of a SPIE technical group is a competitive edge.
• Engineer Full: minimum 4 years of overall experience is expected. Previous experience in Offshore/Onshore Oil & Gas area is a competitive edge. Previous experience in integrity management, implementation / maintenance of SPIE and ISO certificates, and failures analysis is a competitive edge. Previous experience as part of a SPIE technical group is a competitive edge.

Job Description

As Engineer of MSB Lean Manufacturing, you will manage the implementation of Lean transformation methodologies and tools in Assembly, Test and SSD manufacturing at MSB. You will collaborate closely with site functional teams to identify, explore and implement lean methodologies and tools to drive improvements in throughput, labor productivity, yield, and cycle time performance.

Responsibilities:

• Lead the adoption and implementation of Lean methodologies and tools across Assembly, Test, and SSD manufacturing.
• Facilitate continuous improvement events across different functional teams (e.g., Kaizen, Value Stream Mapping (VSM), Projects, Workshops).
• Develop and sustain programs and systems to foster a Lean culture.
• Conduct labor productivity analyses (e.g., Touch-time, MMR, spaghetti charts) to enhance operator and technician efficiency and reduce operational errors.
• Oversee Utilization/ Overall Equipment Effectiveness (OEE) to identify key sources of losses and improvement opportunities.
• Collaborate with functional experts to identify areas for improvement through the application of Lean methodologies and tools.
• Propose Lean approaches and initiatives, including Kaizen and Continuous Improvement Projects.
• Act as the key integrator between central and site functional teams, developing, driving, and communicating progress on critical Lean improvement initiatives.
• Develop an overall view of critical initiatives and their impact on key performance indicators.
• Provide visibility on program status, including key achievements with clear ownership.
• Trigger interventions to ensure programs stay on track towards targets.
• Support regular reporting and meetings with senior leadership, including deep dives for weekly/monthly reports and ad-hoc senior management updates.

Requirements

• Bachelor’s /master’s in Industrial and system engineering, engineering management, Production & Operation Management, or related field.
• Strong project management, analytical skills and problem solving skills
• Possess good communication and interpersonal skills, with the ability to work effectively with multiple multi-functional teams.
• Knowledge of Semiconductor processes, engineering and/or manufacturing operations
• Background in Overall Equipment Effectiveness (OEE) and/or Lean manufacturing fundamentals will be beneficial

Keen on the role? Apply now!

Job Description:

• Assists Quality Engineer in activities related to quality assurance and control system and other quality programs
• Performs measuring, testing, inspection and assists manufacturing with the interpreting of the quality and workmanship standards.
• Downloads quality information from quality system used for quality metrics reporting.
• Performs process audits and assists manufacturing with the interpretation of the quality and workmanship standards.
• Prepares quality documentation or equivalent
• Contributes to the workplace safety and health improvement for the employees, as well as environmental protection, by adhering to the company’s Environmental, Health and Safety policies and procedures, and helping to achieve EHS objectives and targets through participation of EHS programs
• Participate and adhere to Corporate Social and Environmental Responsibility (CSER) policy, programs and procedures.

Requirements:

• NITEC / ITC / Diploma in any discipline or with at least 2 years working experience in the related manufacturing environment.  Proficiency in written and communication skills in English
• Ability to interpret within established procedures,
• Good team player, independent and self-motivated

Job Description:

• Responsible for incoming quality assurance
• Accurately completes all administrative activities associated with quality inspection 
• Performs incoming inspection
• Downloads quality information from quality system to be used for Quality reports 
• Prepares Inspection plan or equivalent.
• Prepares Statistical Process Control Charts where required.
• Contributes to the workplace safety and health improvement for the employees, as well as environmental protection, by adhering to the company’s Environmental, Health and Safety policies and procedures, and helping to achieve EHS objectives and targets through participation of EHS programs
• Participate and adhere to Corporate Social and Environmental Responsibility (CSER) policy, programs and procedures.

Requirements:

• NITEC / ITC / Diploma in any discipline or with at least 2 years working experience in the related manufacturing environment.  Diploma / ITC / NTC in Mechatronics / Electrical & Electronics engineering
• Proficiency in written and communication skills in English
• Practical computer skills and knowledge with hands-on ability

To support our extraordinary teams who build great products and contribute to our growth, we’re looking to add a/an Supplier Quality Engineering Assistant located in Kallang, Singapore.

Job Description:

• Responsible for engineering tests and technical functions related to the support of Supplier Quality Engineering
• Supports Product Engineering, Production and Quality Engineers/Managers with customer interfaces as necessary on quality related issues
• Assists in Supplier Quality Audits
• Interfaces with suppliers on technical/quality issues, RMA, corrective and preventive actions
• Provides factory support to identify and resolve issues associated with purchased parts, materials and manufacturing
• Contributes to the workplace safety and health improvement for the employees, as well as environmental protection by adhering to the company’s Environmental, Health and Safety policies and procedures, and helping to achieve EHS objectives and targets through participation of EHS programs.
• Participate and adhere to Corporate Social and Environmental Responsibility (CSER) policy, programs and procedures.

The experience we're looking to add to our team:

• Diploma in Mechanical Engineering / Electromechanical Engineering / Electronics Engineering / Manufacturing Process Technology
• Ability to interpret within established procedures and practices
• Familiarity with inspection equipment, statistical tools, Geometric Dimension and Tolerance knowledge will be an advantage
• 2 years experiences in dealing with suppliers on non-conformances and investigation

• can work on publick holidays
• can work on shifts/change of shifts
• can work and stand for long hours
• at least 10 years experiences
• have relavant certificates
• 
  
• Provide overall supervision of production activities.
• Plan, organize and lead a team of production workers to achieve production target and output, cycle time, and yield.
• Improvement in maintaining product quality and productivity. Provide a guideline to check on processes thereby assuring that work is done by the operators.
• Monitor the daily efficiency status of the line.
• Ensure good housekeeping and safety at the workplace.
• Oversee hiring and training of food production personnel
• Perform other duties as assigned.

COMPANY DESCRIPTION

Mediacorp is Singapore's largest content creator and national media network, operating a suite of TV channels, radio stations, and multiple digital platforms. Its mission is to engage, entertain, and enrich audiences by harnessing the power of creativity.

We are committed to creating an inclusive and diverse workplace where talent thrives. Our hiring decisions are made based on merit and fit-to-role. If you have a disability or special need which requires accommodation to participate in the recruitment process, please inform us when you submit your online application. We will be happy to support as necessary.

Thank you for your interest and application to this role. Please note that only short-listed candidates will be contacted.

RESPONSIBILITIES

• Live studio direct News & Current Affairs programmes in both automated and traditional galleries. Content is not limited to broadcast content. May be required to support digital from time to time.
• This position is responsible for the execution of live studio programming using a Vizrt Mosart Automation system. The responsibilities include but are not limited to using studio equipment to build effects and templates for coding and execution of studio shows via Octopus rundowns.
• Co-ordinate the planning and production of News and Current Affairs programmes output to ensure that editorial intentions are met, and highest production standards maintained. The individual will be equipped with the right skills and new/developing tools to deliver high quality production.
• Set the direction and work with studio crew on duties on the requirements to facilitate and execute an error-free studio production.
• Work primarily in the studio but occasionally will be needed in the field for outdoor news broadcast.
• In the fast paced nature of news, the individual is required to provide guidance to the studio and production crew on the last minute changes and issues that may happen on during production.
• Enforce the compliance to the Error Tracking System from both the production and maintenance team.

• Minimum Diploma in relevant discipline
• At least 2 years in production, preferably studio/live production but other production acceptable as well.
• Must be able to work in a high-pressure environment and able to react to changes and situations in a calm and collected manner, without supervison.
• Multitasking is required in the role as well as strong people interpersonal skills.
• Proficient in planning, organising and communicating to be able to manage multiple issues that may occur during production as well as the stakeholders from various teams. Required to have an eye for detail and ability to make decisions under pressure.
• Experience with studio production with a strong understanding of studio equipment, including switchers and audio board will be an added advantage.
• Proficiency in the English language and at least one other language (Chinese Tamil or Malay) would be an added advantage to understand the language of the programmes.
• A good team player and must be willing to work nights, on irregular shift including weekends and public holidays.

The Production Manager will be responsible for overseeing all aspects of production operations, ensuring the efficient and timely delivery of high-quality products. This role demands expertise in production planning, team coordination, quality assurance, and continuous improvement, with a focus on maintaining Star Ark’s standard of excellence.

Job Description:

• Responsible for ensuring that the Electrical Integrity Inspection scope of work is executed with technical excellence, acting as a technical reference and local legal representative, focusing on the Electrical Integrity Management Process, ensuring the execution of inspections, generation of recommendations, quality assurance and quality control of subcontractors, and development and improvement of inspection plans, in order to maximize reliability, availability, maintenance, safety and integrity of assets (RAMSI), as well as contributing to the Operations procedures and achievement of results established for the business.
• Support MdB's annual corporate budget planning (expenses and investments) by participating and advising the team on corporate planning, providing information on workforce planning for Electrical Integrity Inspection and on resource needs, services and materials and other expenses used in its activities.
• Guarantee the continuous improvement of IMS by monitoring projects status and ensuring that IMS Documents under Reliability Coordination are updated and implemented.
• Reference to assist in the analysis of inspection results, traceability of information, proper root cause elaboration, and issuance of technical review/recommendation.

Education & Experience:

• Minimum 12 year experience operating with Oil and Gas industry
• Minimum 18 year experience working as Electrical Engineer
• Experience with FPSO is preferred
• Bachelor in Engineering

• Familiarity with multi-tier server architecture (Application, Web, Database).
• Hands-on experience with Oracle, SQL Server, or MariaDB.
• Proficiency in web services, including protocols like SOAP & REST.
• Knowledge of system applications such as backup software, Application Server - Jboss, Web Server - Apache, Messaging system - MQ / AMQ
• Experience in CI/CD pipeline tools like Jenkins using OpenShift cloud platform

Job Title: Senior Producer – Post Production

Location: SINGAPORE
Employment Type: Full-Time

About Us:
We’re a team of creators, storytellers and innovators, focused on crafting groundbreaking content across TV, film, and digital platforms. We thrive in a fast-paced, entrepreneurial environment where ideas and getting things done matter, and results speak for themselves. If you’re a self-starter who is passionate about post production, with strong people skills and a knack for sales, we want you to join us in shaping the future of entertainment.

Why You’ll Love It Here:
We empower our team to think different and take ownership. Whether you’re going after a new deal or managing client relationships, we want you to lead and we will provide the support. With us, you’ll work on projects that challenge you creatively while giving you room to innovate. If you have an independent and entrepreneurial spirit, and thrive in collaborative environments, this is your opportunity to make a real impact.

What You’ll Do:
You’ll be overseeing projects in post, making hires, managing relationships with clients and driving sales growth for our services. You’ll play a key role in both creative execution and client satisfaction, ensuring every project meets the highest standards from start to finish.

Key Responsibilities:

• Lead post-production efforts, managing all phases from editing to final delivery.
• Be the primary point of contact for clients, managing relationships, understanding their vision, and ensuring seamless communication throughout the project lifecycle.
• Develop sales strategies to grow post-production services, identify new business opportunities, and actively seek potential clients.
• Oversee budgets and timelines, ensuring all deliverables are on schedule and within scope.
• Foster strong communication between creative teams and clients to ensure a smooth, efficient workflow.
• Drive client satisfaction by delivering high-quality results and anticipating their needs.
• Troubleshoot any technical or creative challenges that arise during post-production.
• Stay ahead of industry trends, post-production tools, and new technology to keep our services cutting-edge.

What We’re Looking For:

• A self-starter with at least 5 years of experience in post-production management and client relations in TV/film.
• Strong sales experience—comfortable identifying opportunities, pitching services, and closing deals.
• Proven experience managing client relationships and ensuring high levels of client satisfaction.
• Great knowledge of post-production workflows, including editing, VFX, sound, and color grading.
• Proficiency in software like Adobe Premiere, Avid, and DaVinci Resolve.
• Excellent organizational and multitasking skills—you thrive in a fast-paced environment.
• Ability to balance creative vision with client needs while keeping projects on time and within budget.
• Strong leadership and communication skills, with a talent for building collaborative, high-performing teams.

What We Offer:

• Competitive salary plus commission for new business brought in.
• Opportunity to grow sales within a dynamic and rapidly expanding company.
• A fun, entrepreneurial culture that values bold ideas and collaboration.
• Access to state-of-the-art post-production tools and software.
• Ongoing professional development opportunities—grow your skills while growing our business.
• Inclusive and supportive workplace culture where your contributions are recognized.

How to Apply:

Send us your resume, reel, and a cover letter outlining how you’ll elevate our post-production services and help us grow our business.

At BHP x SLS, We are committed to creating an inclusive, diverse, and welcoming workplace for all.

• To supervise the work of sub-contractors and work closely with other operations staff to meet the project schedule
• Report to the Construction Manager
• You will adhere to construction procedures and safe work practices and ensure that works are executed within an acceptable standard of workmanship so as to meet the stringent requirement conducted during site tests and inspections
• Prepared and Assembled ready wooden cabinetry to drawings and specifications for installation.
• Verified dimensions and checked the quality and fit of pieces.
• Measured and marked dimensions of sites.
• Performed Cabinet assembly with the use of hand tools.
• Assisted with all aspects of the assembly team.
• Read detailed schematics for cabinets and executed assembly accurately.
• Helped with delivering and manually installing cabinets.
• Installed cabinets in residential homes.
• Minimum 3 years of relevant experience in the Construction Industry
• Possess a certificate in Building Construction Safety Supervisor (BCSS)
• Supervisory experience in foundation & structural works on site
• Able to work independently with a positive attitude

• To supervise the work of sub-contractors and work closely with other operations staff to meet the project schedule
• Report to the Construction Manager
• You will adhere to construction procedures and safe work practices and ensure that works are executed within an acceptable standard of workmanship so as to meet the stringent requirement conducted during site tests and inspections
• Prepared and Assembled ready wooden cabinetry to drawings and specifications for installation.
• Verified dimensions and checked the quality and fit of pieces.
• Measured and marked dimensions of sites.
• Performed Cabinet assembly with the use of hand tools.
• Assisted with all aspects of the assembly team.
• Read detailed schematics for cabinets and executed assembly accurately.
• Helped with delivering and manually installing cabinets.
• Installed cabinets in residential homes.
• Minimum 3 years of relevant experience in the Construction Industry
• Possess a certificate in Building Construction Safety Supervisor (BCSS)
• Supervisory experience in foundation & structural works on site
• Able to work independently with a positive attitude

•  Maintains and support quality engineering programs, standards and improvements within the organization.
•  Development, implementation and maintaining of inspection plan and inspection tools to ensure process changes for completeness, accuracy and compliance to customer/internal quality management system requirements
•  Devises sampling procedures and designs and develops forms and instructions for recording, evaluating and reporting quality and reliability data.
•  Develops and implements methods and procedures for disposition of discrepant material and devises methods to assess cost and responsibility.
•  Directs inspection team to engage in measuring, inspecting and/or testing products or parts and tabulating data concerning materials, product or process quality and reliability.
•  Executes the inspection / testing of new equipment capability
• Supervises inspection team on the inspection plan
•  Generates monthly metrics reports.
•  Supports Product Engineering and Program Management with customer interfaces as necessary on quality related issues.
•  Contributes to the workplace safety and health improvement for the employees, as well as environmental protection, by adhering to the company’s Environmental, Health and Safety policies and procedures, and helping to achieve EHS objectives and targets through participation of EHS programs
•  Participate and adhere to Corporate Social and Environmental Responsibility (CSER) policy, programs and procedures

Requirement

• Diploma / Degree in Mechanical Engineering / Electromechanical Engineering / Electronics Engineering/Manufacturing Process Technology or related discipline, preferably with at least 3-5 years’ relevant experience in manufacturing environment.
• Familiarity with inspection equipment, statistical tools, Geometric Dimension and Tolerance knowledge will be an advantage
• Fresh graduates will be considered for this position

· Directs and/or coordinates electronic engineering and/or technical personnel in fabrication and design of testing and test control apparatus and equipment, or software and systems testing.
· Directs and coordinates electronic engineering activities concerned with development, procurement, installation, calibration and maintenanceof instruments, equipment and control devices required to test, telemeter and record test data.
· Determines conditions under which tests are to be conducted and sequences and phases of test operations.
· Conduct and support Validation activities on Test System/Equipment and/or process setup.
· Interfaces and confers with scientific, engineering and technical personnel to resolve testing problems such as product or system malfunctions, incomplete test data, data interpretation or coding issues.
· Analyzes and interprets test data and prepares technical reports for use by electronic or software engineering, and management personnel.
· Develops or uses computer software and hardware to conduct tests on electronic products and systems or software.
· Trains and instructs floor support, test technicians and test operators on test hardware and/or software, as well as proper problem solving techniques.
· Resolves test yield problems by performing analysis of root causes, developing and coordinating corrective action measures and monitoring improvements.
· Coordinate equipment/tester maintenance and repair support as required.
· Contribute to the workplace safety and health improvement for the employees, as well as environmental protection, by adhering to the company’s Environmental, Health and Safety policies and procedures, and helping to achieve EHS objectives and targets through participation of EHS programs.
· Participate and adhere to Corporate Social and Environmental Responsibility (CSER) policy, programs and procedures.

Requirement

· Technical knowledge of PCBA and / or System box build
· Able to read and understand 2D drawings, schematics for components
· PC Literate: Word, Excel, Power Point, AutoCAD etc.
· CAD system basics
· Good technical and commercial communication skills. Excellent verbal and written communication skills.
· Ability to work in a customer oriented environment and work well with all internal functional areas, customers and suppliers.
Good team player

JD

· Prepare Materials CTB reports (Clear to Build)

· Liaise between the Material and Program Teams on demand management

· Work closely with production personnel to ensure zero downtime

· Work closely with warehouse/operations to ensure smooth flow of raw.

· Co-ordinate engineering changes with functional departments

· Report key metrics

· Liaise with customers on key materials issues

· Contribute to the workplace safety and health improvement for the employees, as well as environmental protection, by adhering to the company’s Environmental, Health and Safety policies and procedures, and helping to achieve EHS objectives and targets through participation of EHS programs.

· Participate and adhere to Corporate Social and Environmental Responsibility (CSER) policy, programs and procedures.

Requirement

· Diploma/ Degree in any discipline, preferably with 2 years’ relevant experience

· MRP / SAP knowledge preferred

· Good negotiation, communication and interpersonal skills

· Good team player who is independent and self-motivated

· Ability to interpret within established procedures and practices as well as exercise independent judgment in complex situations

1. Checking the kitchen and equipment, monitored and make sure outlet operations running efficiency
2. Make sure outlet staffs prepared food follow by policies & procedures, ensure minimise food wastage
3. Ensure staffs compliance to all safety policies & procedure
4. Monitored outlets neat & clean all the times, ensure all outlets maintaining hygiene standard
5. Plan and arrange duty roster for outlet staffs, make sure enough manpower to support operation
6. Assist in hiring new outlet staffs, handling the phone calls from candidates and process onsite interview
7. Assist in setting up new outlet or closing down outlets
8. Adhere to the company policies and procedures and comply with the Code of Conduct
9. Interact with department and team members, management, and contractors professionally and positively
10. Monitored performance of all team members, encourage good relationships, promote team spirit, and ensure effective two-way communications
11. In Coordination with HR department to arrange training sessions and refresher courses for outlet staffs
12. Provide supervision, guidance and leadership for teams to achieve sectoral goals
13. Other ad hoc duties

Job Summary:

This role requires a seasoned leader with deep expertise in business development, client relationship management and the management of post-production teams. The Director of Sales and Ops is responsible for driving the growth of the company's post production services, identifying market opportunities and building long-term partnerships with new and existing clients. The Director of Sales and Ops is also responsible for the smooth operation of the post facility, ensuring projects are delivered to the highest creative and technical standards for a wide range of major international streamers, broadcasters and producers.

Key Responsibilities:

1. Sales Strategy & Client Acquisition:

a. Develop and implement sales strategy to drive new business for the company's post-production services.

b. Identify and pursue potential clients in the TV, film, advertising and corporate sectors.

c. Manage the sales pipeline from lead generation to closing, achieving sales targets and revenue growth goals.

d. Build and maintain strong relationships with key clients, understanding their needs and delivering tailored solutions.

2. Business Development & Networking:

a. Attend industry events, conferences, and trade shows to network, build relationships, and generate leads for potential clients.

b. Negotiate client contracts, pricing structures, and service level agreements.

c. Oversee the creation of promotional materials, case studies, and content showcasing the company’s post-production capabilities.

d. Manage the company's online presence, including the website, social media platforms, and industry forums, ensuring consistent and engaging messaging.

3. Client and Stakeholder Relations:

a. Serve as the primary point of contact for new and existing clients.

b. Work closely with production and post-production teams to ensure client expectations are met and projects are delivered on time and within budget.

c. Regularly communicate with clients to gather feedback and ensure long-term satisfaction, identifying opportunities for repeat business and referrals.

4. Leadership and Management:

a. Lead, mentor, and manage a team of post-production professionals, ensuring efficient workflows and collaboration across departments.

b. Oversee scheduling, resource allocation, and daily operations.

c. Recruit, train, and retain top talent, fostering a culture of creativity, innovation, and continuous improvement.

5. Project Oversight:

a. Manage multiple post-production projects simultaneously, ensuring timelines, budgets, and deliverables are met.

b. Collaborate with directors, producers, and other key stakeholders.

c. Identify and mitigate risks in post-production timelines, adjusting strategies as necessary to guarantee on-time delivery.

6. Operational Efficiency:

a. Create and manage post-production budgets, track expenses and process payments.

b. Negotiate contracts with external vendors.

c. Maintain the smooth running of the facility.

7. Technology and Innovation:

a. Stay up-to-date with the latest post-production tools, software, and technologies, implementing new solutions as needed to improve workflows and capabilities.

b. Oversee the maintenance and upgrading of post-production infrastructure, including suites, software licenses, and storage solutions.

c. Ensure proper data management and security protocols are followed, safeguarding project assets.

Qualifications:

• Bachelor’s degree in Film, Media Production, or a related field; Master’s degree or equivalent experience preferred.
• 8+ years of experience in post-production, with a minimum of 3 years in a management or leadership role.
• Proven track record of driving revenue growth and achieving sales targets in a fast-paced, creative environment.
• Proven track record of delivering high-quality projects across a range of content formats (TV, film, digital, etc.).
• Working knowledge of post-production systems and pipelines, including editing, colour grading, audio mixing, MGFX/CGI/VFX, mastering, QC and deliverables.
• Strong leadership skills with the ability to manage cross-cultural teams and foster a collaborative environment.
• Excellent communication, presentation, and negotiation skills, with a demonstrated ability to build client relationships and close deals.
• Ability to manage multiple projects and clients simultaneously, with exceptional organizational and time-management skills.
• Knowledge of post-production budgeting, resource management, and scheduling.

Preferred Skills:

• Experience working with international teams.Strong network within the media and entertainment industries.
• Familiarity with emerging trends in virtual production, AI-driven post production tools, and cloud-based post-production workflows.
• Experience with content delivery for streaming platforms and knowledge of platform-specific technical requirements.

Compensation:

Competitive salary commensurate with experience, along with benefits including health insurance, paid time off, and opportunities for professional development.

How to Apply:

Interested candidates should submit their resume, a cover letter, and a portfolio or reel of previous work to [email protected]

PharmEng Technology has been providing quality services to leading manufacturers of healthcare and pharmaceutical products since 1997. Our specialists hold expertise in Commissioning & Qualification, Validation, Quality Systems, Regulatory Affairs, Engineering, and Training to ensure that our clients can keep on providing the world with their cost-effective and high-standard healthcare products. At PharmEng Technology, we strive to cultivate the best working environment where empowerment, passion and perseverance are nurtured while serving our clients to achieve their unique business goals. We are seeking an experienced Manufacturing Engineering Technician with experience in pharmaceutical company/Life Science industries for a role in Singapore.

Responsibilities:

1. Provide technical support to manufacturing operations, including equipment setup, troubleshooting, and maintenance to ensure smooth production processes.
2. Assist in the development and optimization of manufacturing processes, collaborating with engineers and other team members to implement improvements and innovations.
3. Conduct routine inspections and tests on manufacturing equipment and systems to ensure compliance with regulatory standards and quality requirements.
4. Participate in the validation and qualification of manufacturing processes and equipment, documenting procedures and results according to regulatory guidelines.
5. Support continuous improvement initiatives by analyzing data, identifying opportunities for efficiency gains and waste reduction, and implementing corrective actions.
6. Adhere to Good Manufacturing Practices , Standard Operating Procedures, and safety protocols to maintain a safe and compliant work environment.
7. Collaborate with cross-functional teams, including production, quality assurance, and regulatory affairs, to resolve issues and achieve production goals.
8. Provide training and guidance to production personnel on new processes, equipment, and procedures to ensure effective implementation and adherence to standards.

Qualifications:

• Associate degree or technical certification in engineering, pharmaceutical sciences, or a related field; Bachelor's degree preferred.
• Prior experience in pharmaceutical manufacturing or a regulated industry is a plus.
• Strong mechanical aptitude and hands-on experience with manufacturing equipment and instrumentation.
• Knowledge of Good manufacturing practices regulations, and industry best practices for pharmaceutical manufacturing.
• Excellent problem-solving skills and attention to detail, with the ability to analyze data and troubleshoot technical issues effectively.
• Strong communication and interpersonal skills, with the ability to collaborate effectively in a team environment.
• Ability to work independently, prioritize tasks, and adapt to changing priorities in a fast-paced environment.
• Willingness to work flexible hours, including weekends and holidays, as needed to support manufacturing operations.

Why PharmEng Technology?

Our consultants come from different areas of the Pharmaceutical/Biotech/Medical Device industries and have extensive experiences obtained from world-class organizations in North America, Europe, and Asia. At PharmEng Technology, we value everyone’s unique talents and work together to support our clients. We offer continuous career growth, competitive wages, opportunities for travel and a team mentality that sets us apart from our competitors. It is the growth of our staff that continues to grow our company globally.

EEOC Statement

At PharmEng Technology, we don’t just accept difference — we celebrate it, we support it, and we thrive on it for the benefit of our employees, our clients, and our community. PharmEng Technology is proud to be an equal opportunity workplace.

Key Responsibilities:

• ATE Test Program Design and Development for new products (Production and Characterization Test)
• Design/Develop Final Test Loadboard and Wafersort Probecard
• Perform Characterization Testing, prepare test specifications, define tests, conditions, criteria, etc.
• Solid digital and mixed-signal programming experience on ATE using C++/VB language, and scripting
• Monitor and manage production test yields, maverick lots, engineering lots, product test log maintenance, product data statistical process, characterization data process.
• Hands-on test debugging, RMA analysis, and improving test solutions (Hardware and Software)
• Establish cost-effective production test solutions
• Develop team technical competency.
• Build product test plan, schedule, resources requirement and project tracking and execution.
• Conduct product test and releases review, approve the test program releases.
• Maintain and improve the product test process.

Qualifications, Knowledge and Skills requirements:

• Minimum Bachelor's Degree in Engineering (Electrical/Electronics)
• Minimum 5-yrs ATE Test Program Development (C++ and/or VB)
• Experience in Test HW Development (Loadboard and Probecard)
• Good knowledge on manufacturing process (fab, packaging, test)
• Hands-on development experience is a must with Teradyne J750 ATE testers, IG-XL test programming
• Hands-on development experience with Chroma and other main stream testers.
• Project management skills and experience in people management.
• Liaison with factories in China and Taiwan is required, knowledge of Mandarin is essential

Preferred: Knowledge in AEC Q100 automotive qualification guidelines, experience in the automotive test flow, AEC Q100 data analysis, wafer and FT lot process.

COMPANY DESCRIPTION

Mediacorp is Singapore's largest content creator and national media network, operating a suite of TV channels, radio stations, and multiple digital platforms. Its mission is to engage, entertain, and enrich audiences by harnessing the power of creativity.

We are committed to creating an inclusive and diverse workplace where talent thrives. Our hiring decisions are made based on merit and fit-to-role. If you have a disability or special need which requires accommodation to participate in the recruitment process, please inform us when you submit your online application. We will be happy to support as necessary.

Thank you for your interest and application to this role. Please note that only short-listed candidates will be contacted.

RESPONSIBILITIES

• Assist Producer/Director in production processes for drama, other programme genres and digital content as assigned, from pre-production to post-production.
• Manage production schedules.
• Assist in scouting, managing and contacting talents required for production.
• Conduct location checks and suggest suitable locations for filming and recording.
• Assist Producer/ Director during filming or studio recordings.
• Book and coordinate production facilities.
• Fulfill administrative production processes.

• At least A' Levels or Diploma in Media Studies
• Ability to communicate effectively with all levels of staff and public.
• Ability to work independently.
• Effectively bilingual in English and Malay for business purpose.
• Strong interest in television and media.
• Ability to manage talents and performers.

Primary Job Role and Responsibility:

1. Strategic Business Development:
   • Identify and cultivate business opportunities within the advanced manufacturing sector
   • Conduct market analysis to identify trends, skills demand and gaps in the industry
   • Implement strategic plans to drive business growth and increase training adoption.
2. Client Relationship Management
   • Build and sustain strong relationships with key stakeholders, including manufacturing companies, industrial associations, and training providers
   • Serve as the primary contact for customers’ inquiries, offering support and addressing concerns.
3. Training Programme Development
   • Collaborate with Institute of Higher Learning (IHLs) and industry training providers to develop tailored training programmes to address specific client needs.
   • Review training content to ensure that it is relevant, up-to-date, and aligned with industry standards and emerging trends
   • Monitor the performance of training programme and manage client feedback to drive continuous improvement

Requirements:

· Bachelor’s degree Business Administration, Marketing, Engineering, or a related field.

- Min 3-4 years of relevant experience

· Skills and experience in business development, marketing and customer management relevant to advanced manufacturing and industrial training sector

· Strong analytical skills with the ability to interpret market trends and data

· Excellent communication, negotiation, teamwork skills, with effective industry engagement capabilities

· Highly motivated, results-oriented and proactive

Job Description:

• Support MODEC's decision-making process by providing financial analysis, insights, and reliable information, proactively assess challenges and opportunities to ensure informed and strategic decisions are made, and Facilitate collaborations among the team, departments and entities seeking for improvement in accuracy and efficiency in Control activities.
• Handle consolidated managerial reports/presentations/analysis demand such as but not limited to:

• Monthly commercial and finance (C&F) meeting material

• Monthly MFR YTD report comments

• Monthly MdB financial report analytical comments

• Present consolidated managerial cost report and materials in internal and external meetings on demand.
• Organize and facilitate the budget exercise with Control manager.
• Handle ad-hoc needs from Management and provide information within the expected timeline by the situation.
• Maintain close relations with their direct reports to make sure the followings but not limited to:

• Provide necessary support to execute their routine and deliver materials

• Cascade down the instructions from Control Manager

• Catch issues need to be solved and escalate them to Control Manager where necessary

• Promote collaborations among the team

• Promote their development by giving regular feedback and follow-up

• Facilitate communication inside the Control department (Vessel/Corporate/BI/Bid, etc) and promote collaborations.
• Facilitate inter-department relations and encourage the collaboration to have necessary communication and information flown.
• Facilitate inter-entity relations and encourage the collaboration to have necessary communication and information flown.
• Continuously improve cost control processes and procedures to enhance the efficiency and effectiveness of the function.
• Ensure the usage of IMS by their direct reports and contribute to the governance and functionality regarding the following main aspects: define the coordination goals and projects schedule (when applicable) together with IMS team and follow up and guarantee that IMS Documents under their responsibility are updated and implemented.
• Ensure the alignment of their direct reports with Company Objectives, Policies, Procedures and integration with Clients, Community, Suppliers and MdB Executive Team, by leading and engaging them, providing technical and behavioral guidance and feedback sessions and clarifying the career path.

Qualifications & Experience:

• Bachelor's degree in Business Administration, Economics, Accounting or related areas; Bachelor in Engineering, Accounting or Business Management.
• Previous experience in the offshore industry (FPSO Operator, Drilling Companies or other companies in the Oil and Gas sector) is a strong asset
• Accounting and financial knowledge are a strong asset
• Previous management experience is a competitive edge

Job Description

• Ensure the camera system is set up according to the production plan which include the optical, electronic special effects and autocue system.
• Perform creative camera work and able to offer alternative angles for production needs whenever required on various operational modes (i.e Tracks, Tripods, or Handheld). Knowledge in Jibs, Underwater and Steady Camera.
• Work with stakeholders during production to ensure best visuals are captured i.e. camera position, techniques and angles of shots, and ability to problem solve on the spots to ensure output quality not compromised.
• Keep up to date with industry filming methods and equipment, receptive of innovating ways of filming.

Job Requirements

• Nitec in Electronic / Electrical Engineering or Diploma in Film Production.
• Good working knowledge of camera systems, lenses and camera support equipment.
• Preferably 3 years of related working experience.

COMPANY DESCRIPTION

Mediacorp is Singapore's largest content creator and national media network, operating a suite of TV channels, radio stations, and multiple digital platforms. Its mission is to engage, entertain, and enrich audiences by harnessing the power of creativity.

We are committed to creating an inclusive and diverse workplace where talent thrives. Our hiring decisions are made based on merit and fit-to-role. If you have a disability or special need which requires accommodation to participate in the recruitment process, please inform us when you submit your online application. We will be happy to support as necessary.

Thank you for your interest and application to this role. Please note that only short-listed candidates will be contacted.

RESPONSIBILITIES

• Responsible for ensuring all aspects of the studios are in order, including studio set, equipment to ensure a smooth production of the News & Current Affairs programmes for CNA and all news bulletins transmission on Mediacorp channels.
• Assist Automation Directors on all responsibilities for the execution of daily news bulletins and current affairs programmes for both automated and traditional galleries.
• Liaise with Producers, Automation Directors and Graphic Designers to meet technical and operational requirements during live transmission and ensure that editorial intentions are met, with the highest production standards maintained.
• The incumbent will also be equipped with the right skills required for new and developing tools to deliver high quality production.

• Minimum a Nitec/ Higher Nitec in Video Production/ Diploma in Electronic/Electrical/Audio Engineering or its equivalent
• Detail-oriented and be able to multi-task.
• Effective communicator and a good team player.
• Good organizational and project management skills are necessary.
• Shift work required to accommodate the production requirements. Must be willing to work nights, on irregular shift including weekends and public holidays.