Responsibilities

• Responsible for attending the customer complaints and develop resolution
• Responsible in planning and coordinating with the Production on non-conformance product screening as well as conducting containment measures and minimizes DMR issued by customers
• Responsible for providing engineering support to Internal Departments related to quality and technical issues

Requirements

• Min Degree in Mechanical Engineering or its equivalent
• Min 1 years of working experience in process or fixture designs

Please kindly email your resume in Ms Word to [email protected]

We regret to inform that only shortlisted candidates would be notified.

Registration Number: R1328870

EA License No. 22C1026

Responsibilities :

• Schedules customers’ requirements to facilitate efficient process for order fulfillment and customer service.
• Assist in facilitating cross-functional co-operation between Sales/Marketing, Engineering, Manufacturing and Logistics to meet customer delivery satisfaction.
• Ensure availability of finished products for customers as well as assist the logistics goal in meeting target inventory turns and minimize risk of obsolescence.

Requirements :

• "O" Level or Diploma Holder
• At least 2 years of relevant experience
• Working in manufacturing environment will be preferred
• Positive attitude and able to work in a team
• Multi-tasks and able to work under face-paced work environment
• 5 days work week (8.15am to 5.15pm)
• Transport pick-up at Bedok MRT station

Responsibilities

• Responsible for supporting new product development, new product introduction and cost out designing for existing product lines through sound execution of engineering principles and processes
• Responsible in interfaces with design engineering in coordinating the release of new products.
• Responsible for estimating manufacturing cost, determines time standards, and makes recommendations for tooling and process requirements of new or existing product lines.

Requirements

• Min Degree in Electrical / Electronics / Mechatronics / Mechanical/ Microelectronics / Chemical Process Technology
• Min 5 years of working experience in Manufacturing Industry

Please kindly email your resume in Ms Word to [email protected]

We regret to inform that only shortlisted candidates would be notified.

Registration Number: R1328870

EA License No. 22C1026

Responsibilities

• Responsible for coordinating and following up on IT projects implementation
• Responsible for coordinating IT related projects on technological analysis, solutions implementation, administration, and maintenance.
• Responsible for supporting ERP issues

Requirements

• Min Diploma in Computer Science / Information Technology or equivalent
• Min 1 year of working experience in D365/AX/NAV support
• Regional travel as and when required

Please kindly email your resume in Ms Word to [email protected]

We regret to inform that only shortlisted candidates would be notified.

Registration Number: R1328870

EA License No. 22C1026

Responsibilities

• Responsible for inventory management ensuring the inventory is in healthy & good condition.
• Responsible for coordinating with manufacturing Plants and respective Supply Chain Management team to ensure materials and services are being delivered to the respective designation on time and in full (OTIF).
• Responsible for raising material/purchase requisition promptly and monitor the delivery status to ensure delivery is on-time and stock-out
• Responsible for Production Planning and Scheduling process and administrative handling.
• Responsible for performing material planning (MRP/JIT), sub-contracting and execution of raw material resources for Sales Order to meet on time and in full delivery (OTIF).

Requirements

• Min Diploma in Engineering, Supply Chain or Business
• Min 3 years of working experience in Production/ Material Planning in Manufacturing/ Oil&Gas/ Precision industry

Please kindly email your resume in Ms Word to [email protected]

We regret to inform that only shortlisted candidates would be notified.

Registration Number: R1328870

EA License No. 22C1026

Responsibilities

• Responsible for leading the company operational Purchasing and Procurement to optimize resources and ensure customers’ supply chain is able to fulfill customers’ ship-to-dates.
• Responsible in understanding customers’ requirements and passionately drive internal procurement processes and customer’s global supply chain to exceed internal and external customer expectations
• Responsible for driving the strategic initiatives to improve overall efficiency and profitability of the company

Requirements

• Min Degree in Engineering, Supply Chain or Business
• Min 5 years of working experience in Manufacturing Industry

Please kindly email your resume in Ms Word to [email protected]

We regret to inform that only shortlisted candidates would be notified.

Registration Number: R1328870

EA License No. 22C1026

JOB RESPONSIBILITIES

• Translate the outcomes of pre-S&OP and affiliate S&OP meetings into a production/replenishment plan aligned with the business units
• Ensure the continuous supply of materials to meet customer demand and replenish inventory at various locations while achieving inventory and service key performance indicators (KPIs).
• Optimize the production plan by coordinating with plant operations and manage distribution to regions worldwide in accordance with company strategy.
• Monitor inventory levels and take appropriate actions to maintain optimal inventory levels in alignment with KPIs.
• Plan feeder vessel schedules based on the production plan and oversee stock transfers within regions, considering service, cost, and inventory levels at the plant.
• Submit monthly outlook production plans to maintain preparedness regarding raw materials and production sequences.
• Focus on improving supply chain service levels and implement continuous improvement initiatives.
• Prepare regular reports as required.

REQUIREMENTS:

• Degree in Supply Chain Management or Business Administration
• Minimum of 4-5 years of related working experience
• Prior experience in Oil & Gas / Petrochemical industry will be a huge plus

Job code: LONC

EA Reg No.: R1766561 (Chua Long Wee, Andy)

EA License No.: 01C4394 (PERSOLKELLY SINGAPORE Pte Ltd)

We regret that only shortlisted candidates will be notified.

By sending us your personal data and curriculum vitae (CV), you are deemed to consent to PERSOLKELLY Singapore Pte Ltd and its affiliates collecting, using and disclosing my personal data for the purposes set out in the Privacy Policy which is available at https://www.persolkelly.com.sg/policies. I also acknowledge that I have read, understood, and agree to the said Privacy Policy.

Primary:

To provide creative and operational elements of Audio in broadcast standard environment for all TV Production, OB and Studios events.

Responsibilities:

• Assist in planning and the execution of the audio plan to develop the appropriate audio requirement for TV production.
• Assist in handling of basic TV broadcast Mix Audio operations, Front-of-House (FOH) & Stage monitoring operation and ensure consistent audio quality during live and recorded productions.
• Maintain proper records/inventory of the sound equipment and follow up on equipment under repair.

Qualifications:

• NITEC in Electronics/Electrical Engineering/Audio/Video Field or Diploma in Audio Engineering / Film, Sound and Video.
• Willing to work on shifts.
• Experience in setting up sound system.
• Experienced in Audio Mixing and Recording Operation.
• Experience in the Maintenance of audio equipment.
• Strong Communication skills and Problem Solving.

Responsibilities

• Responsible for inventory management ensuring the inventory is in healthy & good condition.
• Responsible for coordinating with manufacturing Plants and respective Supply Chain Management team to ensure materials and services are being delivered to the respective designation on time and in full (OTIF).
• Responsible for raising material/purchase requisition promptly and monitor the delivery status to ensure delivery is on-time and stock-out
• Responsible for Production Planning and Scheduling process and administrative handling.
• Responsible for performing material planning (MRP/JIT), sub-contracting and execution of raw material resources for Sales Order to meet on time and in full delivery (OTIF).

Requirements

• Min Diploma in Engineering, Supply Chain or Business
• Min 3 years of working experience in Production/ Material Planning in Manufacturing/ Oil&Gas/ Precision industry

Please kindly email your resume in Ms Word to [email protected]

We regret to inform that only shortlisted candidates would be notified.

Registration Number: R1328870

EA License No. 22C1026

Responsibilities

• Responsible for inventory management ensuring the inventory is in healthy & good condition.
• Responsible for coordinating with manufacturing Plants and respective Supply Chain Management team to ensure materials and services are being delivered to the respective designation on time and in full (OTIF).
• Responsible for raising material/purchase requisition promptly and monitor the delivery status to ensure delivery is on-time and stock-out
• Responsible for Production Planning and Scheduling process and administrative handling.
• Responsible for performing material planning (MRP/JIT), sub-contracting and execution of raw material resources for Sales Order to meet on time and in full delivery (OTIF).

Requirements

• Min Diploma in Engineering, Supply Chain or Business
• Min 3 years of working experience in Production/ Material Planning in Manufacturing/ Oil&Gas/ Precision industry

Please kindly email your resume in Ms Word to [email protected]

We regret to inform that only shortlisted candidates would be notified.

Registration Number: R1328870

EA License No. 22C1026

Responsibilities

• Responsible for managing customer feedback and maintain relationship with the customers
• Responsible in resolving customers’ complaints and operational issues to achieve customers’ satisfaction
• Responsible for handling customers’ inquiry/ tender for the company products and services
• Responsible for processing quotation and sales order on day to day basis
• Responsible for tracking and reporting on submitted quotation and tender status

Requirements

• Min Diploma in Engineering, Manufacturing or other relevant discipline
• Min 1 years of working experience in Oil & Gas/ Precision/ CNC Industry

Please kindly email your resume in Ms Word to [email protected]

We regret to inform that only shortlisted candidates would be notified.

Registration Number: R1328870

EA License No. 22C1026

• Responsible to evaluate materials status of the China Contract Manufacturer (CM), Southeast Asia CM and EU CM, and monitor materials fulfilment to meet sale orders demand and forecast demand.
• Handle site inventory and Purchase Order (PO) to suppliers to avoid excess stock and make sure CM stock and Open PO with Suppliers (OPO) are able to cover the demand according to supply lead time.
• Regular checking of supplies/CM on the critical components supply schedule, manage CM proactively sourcing for alternative source of supply to ensure continuity of production.
• Develop and maintain good relationships with factories and perform as functional bridge between outsource partners and the internal stakeholders to achieve the corporate targets.

Requirements:

• Diploma in Supply Chain Management or equivalent
• At least 5 years of planning/supply chain experience in Electronics Manufacturing industry.
• Proficient in VLOOKUP and Pivot table and Power BI.
• Good knowledge in MRP/SAP system.

If you are keen to apply for the position, kindly email your detailed resume in MS Word to [email protected]

Please note that only shortlisted candidates will be notified.

For more job opportunities, please visit our website at www.recruit-expert.com

EA Licence: 19C9701

Registration: R1326740

• Prepare, setup and qualify machines before shipping out from factory to customer.
• Support site service as to when required.

Requirements:

• Diploma in Mechatronics
• At least 2 years of working experience in mechanical/electrical control system.
• Good understanding of machinery automation with electrical, servo, sensor, pneumatic system.

If you are keen to apply for the position, kindly email your detailed resume in MS Word to [email protected]

Please note that only shortlisted candidates will be notified.

For more job opportunities, please visit our website at www.recruit-expert.com

EA Licence: 19C9701
Registration: R21100996

Manufacturing Technician

• Location : Gul Road [Company Transport Pick-Up from Boon Lay MRT to Company (2 ways)]
• Working days : 5 days
• Working hours : 9am - 5:30pm

Requirements :

• ITE graduates preferred
• Preferably 1 to 2 years working experience in a factory
• Working experience in a Chemical / Refinery plant an added advantage
• Training will be provided.

Jobscope :

• Filling of Chemicals into drums/bottles.

Interested applicants may choose to apply / Contact me your updated resume for our consultant to find you a suitable oppurtunities

Contact Number : +65 90839650

LIM JUN SHENG Reg No: R22104301

The Supreme HR Advisory Pte Ltd EA No: 14c7279

Job Description

Pfizer Singapore is recruiting permanent employees for manufacturing site expansion of PFIZER ASIA MANUFACTURING PTE LTD (PAMPL) in Singapore.

Why Patients Need You

Our breakthroughs would not make it to the hands of patients without our pharmaceutical manufacturing team. We rely on a team of dedicated and agile members, who understand the importance and impact of their role in Pfizer’s mission. Patients need colleagues like you who take pride in their work and always look to improve outcomes. You will help to ensure that patients and physicians have the medicines they need, when they need them.

Position Summary

• Responsible to operate the plant equipment to manufacture Active Pharmaceutical Ingredients based on established Good Manufacturing Practices (GMP) and Standard Operating Procedures (SOP)
• Assist the Shift Team Supervisor in all aspects of safety, quality and operation investigation, ensuring the finalization and completion of report in a timely manner.
• Assist the Shift Team Supervisor in representing the team for continuous improvement projects, IMEX activities and implementation, development and review of various document to support the shift operation

How You Will Achieve It

• Support the shift operation in all activities, ensuring that it is meets all environmental, health and safety regulations.
• Support the STS in ensuring that all operation and maintenance activities are in compliance to the safety procedures for Lock out/Tag out, energy control procedures, line breaking activities, confine space entry, work at height, hot and cold work permitting.
• Ensure that the shop floor is in a constant state of safety and quality regulatory compliance and inspection ready
• Perform all production, pre MI and post MI activities to ensure manufacturing attainment is achieved, assist the STS in the deployment of resources based on criticality and priority.
• Assign operation task according to Manufacturing Standard Work (MSW) and Operation Standard Work (OSW)
• Participate in all troubleshooting activities in processing issues, deviations and coordinating with other functions when require immediate and preventive actions.
• Participate in all investigation, report and troubleshoot findings on both EHS and quality related issues observed during manufacturing or during batch record review.
• Participate in Continuous Improvement (CI) activities, contribute ideas and perform Plan, Do, Check, Action (PDCA) cycle
• Support the STS in the development of risk assessment, creation of job safety assessment and participate in HAZOP when required.
• Develop Standard Operating Procedures as part of change control and perform periodic review.
• Assist in all commissioning, qualification and validation activities as necessary.
• Participate as a member of the emergency response team (ERT) when necessary.
• 
  

Accountable for:

• Safe operation of plant and equipment
• Safety compliance
• cGMP, GDP and SOP compliance
• Meeting production plan
• Housekeeping of plant area

Qualifications

Must-Have

• Degree in Chemical Engineering or any other Enginering discipline
• 2-3 years' experience in a relevant manufacturing environment. Fresh graduate may be considered.

Work Location Assignment: On Premise

*Able work on weekend,public holiday and rotate night shift.

• Interacts positively and professionally with guests, colleagues and other departments as appropriate and required

• Recommends and suggests specialties to guest, up sells whenever possible

• Responsible for all ordering, inventory, stationary and stocks for daily use in outlet

• Inspects table and glassware for cleanliness and damages

• Inspects service stations for cleanliness, functioning of equipment and sufficient supplies

• Presents bill upon request and processes payment

• Train staff in the outlet as and when necessary

• Ensure that service team adheres and comply to company’s policies and procedures

• Ensure product knowledge is accurately delivered to staff

• Handle customer complaints and feedback

• Ensuring that the handover, closing and opening procedures are completed in each shift

• Ensure the cleanliness of the outlet is maintained throughout

• To maintain a sound knowledge of the menu and presentation standards for food and drinks

• Carry out any other duties as per reporting manger and Food & Beverage Operations Manager

Requirements

• Interest in wine & service
• Prior experience in Food & Beverage is required
• Proactive and guest focused
• Time and task management skills
• Upselling skills
• Attention to detail and able to lead a team
• Able to settle any guest transaction via Food & Beverage Operational System (POS)
• Ability to work flexible shifts and schedules as per manager’s request, including weekends, holidays and overtime.

Responsibilities:

• Liaise with Group of Companies on logistics activities and manage business plan at regional level.
• To oversee LSD function and involve in strategic planning of Logistics solutions.
• To analyze logistics KPI by country & category for further actions.
• To enhance regional logistics activities
• Promote APAC standard process and strategy of Supply Chain among Factory.
• Work closely with respective logistics members and business units in APAC Region.
• Analyze logistics cost and other KPIs
• Monthly Regional Activities Reports

Requirements:

• Diploma in logistics or related disciplines.
• Computer literacy especially in Microsoft office
• Experience in PowerBI and Tableau will be advantages
• Min 3 years’ experience in freight forwarding, warehousing, Logistics and/or shipping
• Available for business trips (Travel frequency: 30%)

If you are interested in the position , kindly send your CVs in to gracelyn.teo(@)randstad.com.sg or +65 98254517
We regret that only shortlisted candidates will be contacted
(EA: 94C3609/ R21101213 )

• Handle a team of line leaders and operators to meet daily production output, quality, productivity, and yield.
• Responsible for manpower, overtime and consumables planning and perform daily pass-down meetings and escalate line issues.
• Ensure manufacturing and safety procedures are observe at all times.

Requirements:

• Diploma in Engineering or equivalent
• At least 2 years of experience in High-Tech, High-Vol Manufacturing industry.
• Able to work 12-hour shifts (day or night)

If you are keen to apply for the position, kindly email your detailed resume in MS Word to [email protected]

Please note that only shortlisted candidates will be notified.

For more job opportunities, please visit our website at www.recruit-expert.com

EA Licence: 19C9701

Registration: R22109628

• Application of chemical and/or physical testing methods and standard operating procedures.
• Responsible for installing new instruments, developing new methods and validating methods.
• Prepare quarterly, monthly and special reports based on analytical chemistry work papers and/or measurement methods.
• Conduct investigations and report any abnormalities in laboratory measurements.

Requirements:

• Minimum bachelor’s degree in chemical Process or equivalent.
• At least 2 years of working experience in semiconductor or manufacturing.
• Thorough knowledge of analytical methods, preferably in trace metals analysis.

If you are keen to apply for the position, kindly email your detailed resume in MS Word to [email protected]

Please note that only shortlisted candidates will be notified.

For more job opportunities, please visit our website at www.recruit-expert.com

EA Licence: 19C9701

Registration: R22109628

Responsibilities

• Understands the basic and essential specifications and requirements of the assigned project and Industry Standard, Classification Society and Regulatory requirements.
• Prepares the cable block diagram, interconnection diagram, loop diagram, I/O list and instrument index specific to the assigned project.
• Prepares engineering specifications (drawings, data sheets, etc) specific to the assigned project and validates them with the Senior/Lead Engineer or Project Manager before incorporating them in the RFQs.
• Evaluates with guidance from Senior/Lead Engineer, the basic items of all the bids received for I&C packages from various suppliers and performs a technical bid evaluation process against the project specifications.
• Prepares accurate documents and specifications timely to be provided to the successful vendors to enable the latter to execute their work and deliverables.
• Develops solutions to the less complex range of technical/engineering and related problems by analyzing the issues/data, interpreting the analysis and proposing various options/measures using experience, precedents and professional references.
• Under supervision of senior/lead engineer evaluates the I&C requirement for mechanical packages in Marine & Topside, contributes to technical bid evaluation process, and ensures selected vendors meet technical/engineering and delivery requirements as stipulated in the project specifications.
• Participates in Factory Acceptance test/Site Acceptance test to ensure that Instrument items function as per specifications. Where necessary, works with the suppliers/contractors concerned to rectify the issues & making sure that they comply with the specifications and are ready on time.
• Participates in meetings, reviews progress and helps address interface/implementation/execution issues, escalates where necessary to ensure that the project proceeds timely and smoothly. Follows up to implement continuous improvement or lesson learnt actions items.
• Provides technical/engineering support to Construction/Commissioning work at site, helps trouble shoot and follows up to rectify the gaps or problems. Where necessary, provides off-site support and advice.
• Guides junior Engineers.

Qualifications & Experience

• Bachelor in I&C Engineering
• 7 years of relevant working experience in I&C engineering in oil and gas sector.
• Comprehensive knowledge on functionality of FPSO

• Install, improve tools, perform maintenance, and compile alarms for equipment.
• Troubleshoot and repair equipment to minimize downtime.
• Analyze equipment failures, create pareto charts, and conduct weak point analysis for improvement.
• Lead continuous improvement initiatives for cost reduction, yield improvement, and OEE improvement.
• Prepare technical reports documenting equipment performance and activities.

Requirements:

• Minimum Degree in Electrical Engineering or equivalent.
• Having prior experience in the semiconductor industry (field of cleaning and polishing of silicon wafers).
• At least 3 years of relevant working experience.

If you are keen to apply for the position, kindly email your detailed resume in MS Word to [email protected]

Please note that only shortlisted candidates will be notified.

For more job opportunities, please visit our website at www.recruit-expert.com

EA Licence: 19C9701

Registration: R22109628

• Thoroughly observe SPC parameters and control charts.
• Implement measures to enhance tool capability performance.
• Investigate quality issues and conduct initial troubleshooting.
• Escalate unresolved problems to the Supervisor and Technology Engineers.
• Manage the dispatch of products to the tool.

Requirements:

• Diploma in engineering or equivalent.
• 2 years of working experience in the related field.

If you are keen to apply for the position, kindly email your detailed resume in MS Word to [email protected]

Please note that only shortlisted candidates will be notified.

For more job opportunities, please visit our website at www.recruit-expert.com

EA Licence: 19C9701

Registration: R22109628

*Able work on weekend,public holiday and rotate night shift.

• Interacts positively and professionally with guests, colleagues and other departments as appropriate and required

• Recommends and suggests specialties to guest, up sells whenever possible

• Responsible for all ordering, inventory, stationary and stocks for daily use in outlet

• Inspects table and glassware for cleanliness and damages

• Inspects service stations for cleanliness, functioning of equipment and sufficient supplies

• Presents bill upon request and processes payment

• Train staff in the outlet as and when necessary

• Ensure that service team adheres and comply to company’s policies and procedures

• Ensure product knowledge is accurately delivered to staff

• Handle customer complaints and feedback

• Ensuring that the handover, closing and opening procedures are completed in each shift

• Ensure the cleanliness of the outlet is maintained throughout

• To maintain a sound knowledge of the menu and presentation standards for food and drinks

• Carry out any other duties as per reporting manger and Food & Beverage Operations Manager

Requirements

• Interest in wine & service
• Prior experience in Food & Beverage is required
• Proactive and guest focused
• Time and task management skills
• Upselling skills
• Attention to detail and able to lead a team
• Able to settle any guest transaction via Food & Beverage Operational System (POS)
• Ability to work flexible shifts and schedules as per manager’s request, including weekends, holidays and overtime.

Job Description

• Manufacturing Cake, pastry and bread product
• Work with production teams to ensure cost-effective, high quality and timely delivery of products.
• Establish and enforce company policies and safety procedures for staffs.
• Recommend process improvements to enhance production quality and capacity.
• Work with Managers to analyze job orders and develop production tasks and schedule.
• Plan and assign daily job duties to workers.
• Recommend changes in workflow, operations and equipment to maximize production efficiency.
• General cleaning after working time

Requirements

• Have relavant experience, if have pastry production experience will be an advantage
• Ability to work under stress
• Able to work early morning start from 6am
• Able to work on weekend
• Able to accpet work overtime
• Able to work under wet and hot environment
• Have at least one year relevant working experience
• Multitasking
• Is a problem solver

COMPANY DESCRIPTION

Mediacorp is Singapores largest content creator and national media network, operating a suite of TV channels, radio stations, and multiple digital platforms. Its mission is to engage, entertain, and enrich audiences by harnessing the power of creativity.

We are committed to creating an inclusive and diverse workplace where talent thrives. Our hiring decisions are made based on merit and fit-to-role. If you have a disability or special need which requires accommodation to participate in the recruitment process, please inform us when you submit your online application. We will be happy to support as necessary.

Thank you for your interest and application to this role. Please note that only short-listed candidates will be contacted.

RESPONSIBILITIES

Primary Purpose:

Manage and supervise the daily activities of the team members in accordance to the production specifications and requirements. Ensure that the team meets standard in terms of operation efficiency, and service uptime. Develop the capability of team members.

Job Responsibilities:

• Supervise a group of cameraman and guide them in all video technical set up. Review and update SOPs.
• Conduct annual review and assessment of team members training needs.
• Guide crew in camera operation (i.e. general camera system set up, angles, distances, movement) and overall operations concerning video, audio and electrical for TV production.
• Perform duty as Technical Producer for major production whenever necessary. Ensure production meets broadcasting standard. Anticipate problem and provide solution on complex issues.
• Provide contingency planning and ensure deliverable of production setup are adhered.
• Keep abreast of broadcasting technology development and industry standards and workflows. Offers recommendations for upgrades and changes to ensure operations are kept relevant and competitive.

• Diploma in Film Production or Electronics/Electrical Engineering or Audio related field.
• At least 10 Years of Ligting experience is preferred.
• Possess in-depth working knowledge of overall unit operations concerning camera, video, audio, lighting and electrical for TV Broadcasting.
• Possesses knowledge of camera systems, lenses and camera support equipment will be added advantage.
• Familiar with international broadcast standard, preferably ITU (International Telecommunication Union) and EBU (European Broadcasting Union) broadcast standard.