Manufacturing Technician

Location : Gul Road [Company Transport Pick-Up from Boon Lay MRT to Company (2 ways)]

Working days : 5 days

Working hours : 9am - 5:30pm

Salary : $1,600 - $2,000 [OT paid when OT required]

Interested applicants can also send your resume to

WA:+65 8151 4682 (Ms Angel) and allow our Consultant to match you with our Clients. No Charges will be incurred by Candidates for any service rendered.

LIEW ONN KEE REG NO : R22108518

THE SUPREME HR ADVISORY EA NO:14C7279

Requirements :

• ITE graduates preferred
• Preferably 1 to 2 years working experience in a factory
• Working experience in a Chemical / Refinery plant an added advantage
• Training will be provided.

Jobscope :

• Filling of Chemicals into drums/bottles.

• Handle a team of line leaders and operators to meet daily production output, quality, productivity, and yield.
• Responsible for manpower, overtime and consumables planning and perform daily pass-down meetings and escalate line issues.
• Ensure manufacturing and safety procedures are observe at all times.

Requirements:

• Diploma in Engineering or equivalent
• At least 2 years of experience in High-Tech, High-Vol Manufacturing industry.
• Able to work 12-hour shifts (day or night)

If you are keen to apply for the position, kindly email your detailed resume in MS Word to [email protected]

Please note that only shortlisted candidates will be notified.

For more job opportunities, please visit our website at www.recruit-expert.com

EA Licence: 19C9701

Registration: R22109628

• Accountable for equipment capacity improvement, verification and Operations productivity improvement.
• Establish planning factors for short-term planning and scheduling as well as for strategic planning scenarios.
• Create strategies for shop floor scheduling to meet the planned output.
• Liaise with Production to control dispatch points to ensure a smooth production.

Requirements:

• Degree in Industrial Engineering or equivalent
• At least 2 years of experience in manufacturing and logistics process, systems, and product costing in High Volume Manufacturing industry.
• Proficient in SAP and Microsoft Office

If you are keen to apply for the position, kindly email your detailed resume in MS Word to [email protected]

Please note that only shortlisted candidates will be notified.

For more job opportunities, please visit our website at www.recruit-expert.com

EA Licence: 19C9701

Registration: R1326740

• Prepare, setup and qualify machines before shipping out from factory to customer.
• Support site service as to when required.

Requirements:

• Diploma in Mechatronics
• At least 2 years of working experience in mechanical/electrical control system.
• Good understanding of machinery automation with electrical, servo, sensor, pneumatic system.

If you are keen to apply for the position, kindly email your detailed resume in MS Word to [email protected]

Please note that only shortlisted candidates will be notified.

For more job opportunities, please visit our website at www.recruit-expert.com

EA Licence: 19C9701
Registration: R21100996

about the company

My client is an US MNC. The business succeeds on the speed of its innovation and there are great opportunities to progress in this dynamic company.

about the job

• Develop new MBRs, using existing MBR templates, in support of Technology Transfers
• Maintain currency of MBRs for existing customers
• Produce high-quality documentation that meets applicable standards/ requirements of the users
• Write and edit technical information/ instructions in a manner to ensure content is factual and accurate
• Translates engineering data into procedures and instructions
• Drive and manage manufacturing Change Request from its initiation till its closure
• Creates and manipulates electronic files for on-line documentation publishing
• Disseminates documents for technical review
• Coordinates the printing, electronic publications, and distribution of technical documentation

skills & experience required

• Bachelor Degree in Chemical / Biochemicalor Science (Biochemistry/ Chemistry/ Microbiology) or equivalent
• Min 4 years of experience in technical writing / publishing
• Experience utilizing a structured phase gate product development process
• Hands on in JDE or Agile will be a plus
• Working knowledge in complex machine BOM (Bill of Material) structure, engineering change process and workflow (spare parts manual)
• Proficiency in technical writing tools: Adobe Framemaker, Dreamweaver, Photoshop, Illustrator, Animate
• Able to commence immediately or within short period
• Willing to work in west area of Singapore (Tuas / BoonLay / Pioneer)

If you are interested in the position , kindly send your CVs in to yitwei.kwan(@)randstad.com.sg

Please include your availability, expected salary and reason for leaving current job

We regret that only shortlisted candidates will be contacted

EA: 94C3609 / Reg: R1325913

• Prepare, setup and qualify machines before shipping out from factory to customer.
• Support site service as to when required.

Requirements:

• Diploma in Mechatronics
• At least 2 years of working experience in mechanical/electrical control system.
• Good understanding of machinery automation with electrical, servo, sensor, pneumatic system.

If you are keen to apply for the position, kindly email your detailed resume in MS Word to [email protected]

Please note that only shortlisted candidates will be notified.

For more job opportunities, please visit our website at www.recruit-expert.com

EA Licence: 19C9701
Registration: R21100996

• Prepare, setup and qualify machines before shipping out from factory to customer.
• Support site service as to when required.

Requirements:

• Diploma in Mechatronics
• At least 2 years of working experience in mechanical/electrical control system.
• Good understanding of machinery automation with electrical, servo, sensor, pneumatic system.

If you are keen to apply for the position, kindly email your detailed resume in MS Word to [email protected]

Please note that only shortlisted candidates will be notified.

For more job opportunities, please visit our website at www.recruit-expert.com

EA Licence: 19C9701
Registration: R21100996

• Application of chemical and/or physical testing methods and standard operating procedures.
• Responsible for installing new instruments, developing new methods and validating methods.
• Prepare quarterly, monthly and special reports based on analytical chemistry work papers and/or measurement methods.
• Conduct investigations and report any abnormalities in laboratory measurements.

Requirements:

• Minimum bachelor’s degree in chemical Process or equivalent.
• At least 2 years of working experience in semiconductor or manufacturing.
• Thorough knowledge of analytical methods, preferably in trace metals analysis.

If you are keen to apply for the position, kindly email your detailed resume in MS Word to [email protected]

Please note that only shortlisted candidates will be notified.

For more job opportunities, please visit our website at www.recruit-expert.com

EA Licence: 19C9701

Registration: R22109628

Production Planner

Working hours: 5 Days， 8.30am to 6pm

Salary: Basic $3000 - $4500

Address: Serangoon North Ave


Responsibilities:
• Plan material based on production needs
• Manage inventory levels optimally
• Track production schedule for timely delivery
• Coordinate with testing team and schedule production staff

Requirements:
• Diploma in Manufacturing/Production/Electronics Engineering
• Minimum 1 year in electronics manufacturing
• Communicate and collaborate with internal customers, purchasing team, and subcontractors
• Material planning for production needs
• Familiarity with ERP and MRP systems
• Basic supervisory skills

Project Management Manager

Working hours: 5 Days， 8.30am to 6pm

Salary: Basic $5000 - $7200

Address: Serangoon North Ave


Responsibilities:
•Oversee projects and clients in Medical and Industrial sectors
• Acquire sales for new and recurring projects
• Guarantee customer contentment regarding product quality, delivery, and service

Requirements:
• Hold at least a Diploma in Electronics Engineering
• Possess a minimum of 3 years of Project Management experience in the Electronics manufacturing sector
• Capable of collaborating efficiently with cross-functional teams
• Proficient in project management and customer service abilities
• Display a strong customer-centric approach and goal-oriented mindset
• Demonstrate excellent interpersonal and communication proficiencies

Job Responsibilities

• Troubleshoot and rectify any technical issues that arise during the manufacturing processes.
• Monitor manufacturing processes to ensure their efficient and adherence to quality standards.
• Collaborate with the Production Manager to oversee and execute the specified goals, operational performance, process efficiency, and KPIs within the manufacturing processes.
• Monitor the Overall Equipment Effectiveness throughout the manufacturing processes to improve and optimise its operational performance.
• Examine essential operational metrics, conduct data analysis, and identify issues and opportunities for enhancement within the manufacturing processes.
• Continuously enhance manufacturing processes to achieve optimal cost-efficiency, quality, and reduced delivery lead times.
• Responsible for the design of automation process equipment, integration of platform equipment, and establishment of interfaces with operational and equipment platform systems. This includes control and monitoring logic, spanning both basic and detailed design phases.
• Liaise with various stakeholders, including Production, Quality, Engineering, IT owners, and vendors, to efficiently reduce downtime and enhance throughput.
• Initiate project management procedures which include cost, quality, scope, and schedule to guarantee timely delivery.
• Uphold a safe work environment by diligently enforcing safety rules and regulations across all work areas.

Job Requirements

• Diploma or Degree in related Engineering fields (Electrical Engineering, Mechanical Engineering, Mechatronics or Computer Management).
• Minimum 5 years of experience in the manufacturing industry, specifically with automation processes.
• Possess excellent communication skills and a collaborative team spirit.
• Proactively dedicated to implementing innovative solutions for task completion.
• In-depth knowledge of GMP and the pharmaceutical industrial.
• Knowledge in safety systems and adept at enforcing safety rules and policies.

Other Information

• Location: Macpherson Road
• Working Hours: 5 days week (8.00am – 5.15pm)

Only shortlisted candidate will be notified.

To apply, please visit to www.gmprecruit.com and search for Job Reference: 23526

GMP Recruitment Services (S) Pte Ltd | EA Licence: 09C3051 | EA Personnel: Jaremy Ong | Registration No: R1876766

Head of Finance & Administration

Working days: Mon - Fri 8.30am - 5.30pm

Salary: S$4,800 to S$5,500

Location: Ubi

Job Responsibilities:

• Operation of finance, HR and procurement
• Support sales and marketing of full range of our products
• Planning and budgeting
• Assist in the organizing of exhibition
• Assist the General Manager in absence
• Work Independent

Job Requirements:

• Degree in Business Administration, Operations Management, or a related field

https://wa.me/6596420989

WhatsApp: +65 9642 0989 (Han)

Email: [email protected]

Chaw Chiaw Han, Reg No：R22106723

The Supreme HR Advisory Pte Ltd, EA No：14c7279

• Location : Gul Road, Singapore [Company Transport Pick-Up from Boon Lay MRT to Company (2 ways)]
• Working days : 5 days
• Working hours : 9am - 5:30pm
• Salary : $1,600 - $2,000 [OT paid when OT required]

Requirements:

• ITE graduates preferred
• Preferably 1 to 2 years working experience in a factory
• Working experience in a Chemical / Refinery plant an added advantage
• Training will be provided.

Responsibilities:

• Filling of Chemicals into drums/bottles.

If you are interested to apply, kindly WhatsApp me your updated resume in DOC file and allow our Consultant to match you with our Clients.

Whatsapp: +65 8525 2419

Email: [email protected]

Tan Man Ee (Ashley) Reg No: R22108289

The Supreme Hr Advisory Pte Ltd EA No: 14C7279

1) Process

• Start up, Operate, Monitor and Shut Down Process and Utility systems.
• Monitor, maintain and optimize process parameters (Level, flow, temperature, pressure etc) within operating requirements.
• Ensure sampling is carried out and sample results are acted upon.
• Trouble shoot to maximize sales quality and delivery volume to identify problems.
• Maintain discharge water quality within current O&M Contractor or local guidelines.
• Monitor and operate electrical/hydraulic control panels, safety and emergency shutdown devices, Fire and Gas Systems.
• Ensure accurate and timely production reporting and logging is submitted daily or as required by company.
• Witness third party calibrations when appropriate to provide verification of meter factors and volumes.
• Prove export oil meters.

2) Marine/Safety

• Work to O&M Contractor Management System policies and procedures in particular Isolation Standards, and PTW.
• Carry out all operations in safe and environmentally sound manner.
• Report all discharges, leaks, spills, injuries, and incidents, immediately.
• Ensure vendor and subcontract personnel within responsibility understand and comply with current environmental regulations.
• Carry out Emergency Response role

3) Maintenance

• Facilitate maintenance operations by applying/removing isolations as required.
• Operation under PTW system, Toolbox Talk and Risk Assessments.
• Advise maintenance personnel on hazards of plant and equipment.
• Maintain clear and precise communications during maintenance operations.

4) Interpersonal Skills & Suitability

• Control activities of vendor and subcontractor personnel.
• Create and maintain effective working relationships
• Create and maintain positive work culture.

Qualifications & Experience

• Proven experience and/or qualified to N/SVQ Hydrocarbon Processing Level 2 or similar qualification level from country of origin. 
• 3 years experience of hydrocarbon processing systems and utilities. 
• Knowledge of ESD F&G and DCS operation. 
• Good understanding of Permit to Work, Mechanical Isolation Standards and Risk Assessment  Medically fit to offshore International standards such as ENG1 or equivalent.

We are currently working with a Global Manufacturing firm who is looking for a Laser Manufacturing Engineer. You will be overseeing the technical alignment of the system to make it more efficient. If you have sufficient knowledge in lasers/using laser equipment, please apply to this role! This position will have the opportunity to travel to US for trainings.

Responsibilities:

• Oversee the seamless transfer of new products from design engineering to manufacturing sites for mass production.
• Develop and implement continuous improvement projects, employing a systematic approach to problem-solving.
• Develop and assess manufacturing processes, utilizing knowledge of product design, fabrication, assembly, tooling, and materials.
• Create assembly process flows, descriptions, and work instructions.
• Resolve daily issues promptly to facilitate the smooth fulfillment of production orders.
• Apply process control, such as statistical process control (SPC), to monitor, analyze, and refine processes, reducing variability.
• Enhance manufacturing efficiency through the analysis and planning of work flows, space requirements, and equipment layout.
• Ensure product and process quality by implementing appropriate testing methods, analyzing process capabilities, establishing standards, and validating manufacturing processes.
• Prepare product and process reports by collecting, analyzing, and summarizing failure/defect information and trends, and follow up with corrective/improvement actions.
• Determine calibration and maintenance processes for production tools and test equipment.
• Provide technical support to field service teams.

Requirements:

• Good knowledge of solid-state and fiber-based lasers.
• Hands-on experience with the assembly and testing of optical, electro-optical, electro-mechanical, and laser systems.
• Good understanding of manufacturing best practices (e.g., ISO 9001, Kanban, LEAN, 8D, Design-for-Manufacturability, etc.).
• Bachelor’s degree and above in laser, optic, or electro-optical engineering.
• Experience in laser systems manufacturing.

Electronics Engineer

Working hours: 5 Days， 8.30am to 6pm

Salary: Basic $3200 - $4500

Address: Serangoon North Ave

Responsibilities:
• Facilitate technical transfer of products/projects in assembly and testing, both internally and from customers
• Offer technical support in manufacturing and testing during product assembly
• Provide technical assistance to QC in handling RMA issues
• Support QA in Compliance, Regulatory, Customer & Audit matters with technical expertise

Requirements:
• Possess a minimum Diploma in Electronics Engineering
• Have at least 2 years of relevant experience in the Electronics Manufacturing industry
• Demonstrated technical proficiency in managing product/project manufacturing, transfers, and troubleshooting
• Experience in product/project, PCBA manufacturing, and testing
• Capable of effectively communicating with customers on technical matters
• Experience in a manufacturing environment with ISO13485 & FDA is preferred
• Strong communication and problem-solving skills

QC Engineer

Working hours: 5 Days， 8.30am to 6pm

Salary: Basic $3200 - $5500

Address: Serangoon North Ave


Responsibilities:
• Collaborating with Process Engineer & Engineering team on QC requirements
• Documenting inspection criteria and quality plans
• Collaborating with QA, Process, and Product teams on corrective actions for quality issues
• Collaborating with Process team on in-process and FQC audits

Requirements:
• Hold at least a Diploma in Manufacturing /Quality Engineering
• Possess a minimum of 1 year of relevant experience in Electronics Product Manufacturing environment
• Manage Supplier Quality Assurance (SQA)
• Control quality of incoming, in-process, and outgoing products
• Familiarity with ISO 9001, 14001, 13485 & 45001, FDA requirements
• Understanding of IPC requirements in PCB Assembly, quality standards for plastic molding, die casting, extrusion, metal stamping, and machining parts

Manufacturing Technician

• Location : Gul Road, Singapore 629355 [Company Transport Pick-Up from Boon Lay MRT to Company (2 ways)]
• Working days : 5 days
• Working hours : 9am - 5:30pm

Requirements :

• ITE graduates preferred
• Preferably 1 to 2 years working experience in a factory
• Working experience in a Chemical / Refinery plant an added advantage
• Training will be provided.

Jobscope :

• Filling of Chemicals into drums/bottles.

Interested applicants may choose to apply / Contact me your updated resume for our consultant to find you a suitable oppurtunities

Contact Number : +65 90839650

LIM JUN SHENG Reg No: R22104301

The Supreme HR Advisory Pte Ltd EA No: 14c7279

Contract Manufacturing Manager

About the company:
A prominent worldwide supplier of hardware and software solutions catering to the manufacture of semiconductors and electronics.

Position Summary:
Leads the Contract Manufacturing Department. Take-charge in strategic sourcing and development. Oversees end to end contract manufacturing collaborations (Delivery of strategic commitments - on quality, cost and all factors). Partnerships with stakeholders to escalate risks and run operations smoothly.

• Salary: Up $11,000 + AWS
  
  Key responsibilities:
• Managing relationship with suppliers
• Source, identify, evaluate and select the Contract manufacturers based on objectives
• Contract negotiations
  Production and capacity planning (Production schedules, S&OP) to meet delivery requirements.
• Planning for provisions in CM capacity surge
• Create stringent plan with QA to ensure safety & quality assurance
• Implement KPIs and metric to assess the performances
• Project management, - identify and escalate business critical risks
• Participates in annual business planning process and budgets
  Requirements:
• Minimum Degree
• Minimum 10 years of experience in MANUFACTURING (ops,planning, technology, quality) AND commercial/business.
• Relevant experience in External/Contract manu, supply chain processes and quality management.
• Relevant experience in capital equipment contract manufacturing, dealing with contract/project mgmt, operation/delivery.
• Excellent project management skills with the ability to manage multiple projects simultaneously.
• Open to travel overseas as needed
• Handling of end to end process

If you are interested in the position , kindly send your CVs in to gracelyn.teo(@)randstad.com.sg or +65 98254517

Please include your availability, expected salary and reason for leaving current job. We regret that only shortlisted candidates will be contacted
(EA: 94C3609/ R21101213 )

• Prepare, setup and qualify machines before shipping out from factory to customer.
• Support site service as to when required.

Requirements:

• Diploma in Mechatronics
• At least 2 years of working experience in mechanical/electrical control system.
• Good understanding of machinery automation with electrical, servo, sensor, pneumatic system.

If you are keen to apply for the position, kindly email your detailed resume in MS Word to [email protected]

Please note that only shortlisted candidates will be notified.

For more job opportunities, please visit our website at www.recruit-expert.com

EA Licence: 19C9701
Registration: R21100996

• Install, improve tools, perform maintenance, and compile alarms for equipment.
• Troubleshoot and repair equipment to minimize downtime.
• Analyze equipment failures, create pareto charts, and conduct weak point analysis for improvement.
• Lead continuous improvement initiatives for cost reduction, yield improvement, and OEE improvement.
• Prepare technical reports documenting equipment performance and activities.

Requirements:

• Minimum Degree in Electrical Engineering or equivalent.
• Having prior experience in the semiconductor industry (field of cleaning and polishing of silicon wafers).
• At least 3 years of relevant working experience.

If you are keen to apply for the position, kindly email your detailed resume in MS Word to [email protected]

Please note that only shortlisted candidates will be notified.

For more job opportunities, please visit our website at www.recruit-expert.com

EA Licence: 19C9701

Registration: R22109628

Position: Production Support (IHS Markit EDM solutions, Tectia scripting, Control-M)
Employment Type: 1-year Agency Contract (Highly Renewable)
Location: Alexandra

Key Skills:
- IHS Markit EDM solutions
- MS SQL Database knowledge
- Windows NT batch, Tectia SFTP scripts skills
- Asset Management Business functional knowledge

Job Objectives

• To provide proactive, timely, effective and efficient support to the business users
• To perform production support activities which involve assignment of issues and issue analysis and resolution within the specified SLAs
• To own issues and projects, and work with the various teams to develop solutions for the users
• To collaborate with business partners, third party vendors, and technology teams to facilitate the support process and work toward timely and effective issue resolution

Responsibilities:

• The Production Support person is responsible for managing the Enterprise Data Management application including web GUI, SQL database and Tectia SFTP batch scripts.
• Work in the Production support team; Provide front-line support for incoming issues to ensure timely and effective resolution of user issues, queries and projects
• Adopt standard Incident and Problem Management workflow and processes, i.e. timely ticket, defect and incident loggings, proper change management process, and quality issue/impact emails
• Actively manage all incidents and issues to proper closure – escalate issues as appropriate to necessary teams and management
• Analyse, document and track all actions taken throughout the lifecycle of the issue including decisions made, successful and unsuccessful actions taken, and final steps executed for resolution. Evaluate documented resolutions, analyse trends, and make recommendations to prevent future occurrences of similar issues
• Participate and collaborate with the development team in requirements gathering, clarification, and analyse impacts on issue or users requirements
• Assist the application development team as needed by validating fixes or enhancement to ensure problems have been adequately resolved
• Embrace standard Change Control Management practices, procedures and guidelines for application releases
• Engage vendor to provide solutions for the stability and sustainability of the production environment.
• Participate in annual DR/BCM activities or infrastructure related upgrade
• Utilize software updates, drivers, knowledge bases, and FAQ resources on the Internet/Intranet to aid in problem resolution

Job Requirements:

• Knowledge in HIS Markit EDM solution, MS SQL database, Windows/Tectia scripts, control-m job scheduling
• Min. Diploma in Computer Science / Engineering or related disciplines
• Min. 2 years of hands-on application management experience, preferably in the Asset Management business
• Strong skills in Windows batch, Tectia scripting, MS SQL Database, BMC Control-M Scheduler
• Good team player, Independent, proactive and self-starter with excellent interpersonal and communication skills

If keen, kindly forward your CV to [email protected]

Tangspac Consulting Pte Ltd
#03-02 The Octagon, 105 Cecil Street, Singapore 069534
EA Personnel Name: Olsem Stefanus Emmanuel
EA License: 07C3635 | EA Registration: R2094432

• Handle a team of line leaders and operators to meet daily production output, quality, productivity, and yield.
• Responsible for manpower, overtime and consumables planning and perform daily pass-down meetings and escalate line issues.
• Ensure manufacturing and safety procedures are observe at all times.

Requirements:

• Diploma in Engineering or equivalent
• At least 2 years of experience in High-Tech, High-Vol Manufacturing industry.
• Able to work 12-hour shifts (day or night)

If you are keen to apply for the position, kindly email your detailed resume in MS Word to [email protected]

Please note that only shortlisted candidates will be notified.

For more job opportunities, please visit our website at www.recruit-expert.com

EA Licence: 19C9701

Registration: R22109628

• Enhance equipment capacity and verify it while improving operational productivity.
• Establish planning parameters for short-term and strategic planning.
• Monitor and address near-term production bottlenecks.
• Create scheduling strategies for the shop floor to meet throughput goals.
• Collaborate with Production to control dispatch points for seamless production flow.

Requirements:

• Degree in Industrial Engineering or equivalent.
• Minimum 2 years of experience in relevant field.
• Strong understanding of manufacturing and logistics processes, systems, and manufacturing industry product costing.
• Proficient in Microsoft Office and SAP.

If you are keen to apply for the position, kindly email your detailed resume in MS Word to [email protected]

Please note that only shortlisted candidates will be notified.

For more job opportunities, please visit our website at www.recruit-expert.com

EA Licence: 19C9701

Registration: R22109628

Position: Production Support Analyst
Employment Type: 6-month Agency Contract (Highly Renewable)
Location: Alexandra Road
Mode of Work: Hybrid

Key Skills:

• Swift Product Skills: Retail / Wholesale banking support, AML, AMH, Wealth Management
• Programming Languages: Java, J2EE, JMS, Webservices, Micro Services, UNIX (Shell Scripting)
• Database & Tools: Oracle (SQL & PL Sql), Control M, Splunk, Prometheus, Grafana
• Servers & Middle Ware: OpenShift Platform (OCP), IBM MQ Series, Weblogic, Tomcat

Job Objectives

• We are seeking a skilled and experienced application production support to oversee and manage various projects within our prod support team.
• The ideal candidate will have a strong background in the project management, particularly with prod support env, and possess excellent org and comm skills.
• This role will primarily focus on coordinating and managing projects related to the maintenance and enhancement of our prod systems, ensuring timely delivery, stability, and high-quality results.

Key Responsibilities:

• Key point of contact for development team to coordinate / validate on the production readiness, change quality, observability, resilience, and production risk
• Identify and mitigate project risk, proactively addressing potential issues to minimize potential disruptions to production operations
• Serve as the primary point of contact for project-related communications, providing regular updates to stakeholders on project status, milestones, and any changes in scope or requirements.
• Facilitate the resolution of project-related issues and conflicts, working collaboratively with team members and stakeholders to find effective solutions
• Maintain accurate project documentation, including project plans, meeting minutes, status reports, and other relevant records.
• Identify opportunities for process improvements and efficiencies within the production support team, implementing best practices to enhance overall project delivery and performance.
• Ensure compliance with company policies, procedures, and regulatory requirements throughout the project lifecycle.
• Own production operational issues by issuing initial response, data gathering, tracking, and resolution where possible as well as determining escalation protocol based on the nature of the issue
• Ability to direct multiple resources on cross functional teams to troubleshoot and resolve complex systems issues
• Manage and respond to users on timely manner for reported production issues/clarification

Job Requirements:

• Minimum 10 years of hands-on experience in Java, J2EE, JMS, Webservices, Micro Service, Oracle, UNIX, IBM MQ Series, Control-M, Splunk
• Proven experience in project management, particularly in a production support environment
• Excellent communication and interpersonal skills, with the ability to effectively engage and influence stakeholders at all levels.
• Demonstrated ability to manage multiple projects simultaneously and prioritize tasks effectively.
• Hands-on experience in IT Operations/Production support L2/L3.
• Experience in ITIL process and tools like Control-M is a plus.
• Strong analytical & trouble shooting skills required.
• Experience in Disaster Recovery planning and test execution.
• Exhibits problem solving skills and shows flexibility in supporting evolution in process, standards, and strategy.
• Experience working in financial services industry supporting mission critical applications is a big plus.
• This is a temporary position with an expected duration of 6 months, with the possibility of extension based on project needs and performance.

If keen, kindly forward your CV to [email protected]

Tangspac Consulting Pte Ltd
#03-02 The Octagon, 105 Cecil Street, Singapore 069534
EA Personnel Name: Olsem Stefanus Emmanuel
EA License: 07C3635 | EA Registration: R2094432