Responsibilities

• Lead a team of line leaders and operators to meet daily production output, quality, productivity and yield.

• Conduct daily pass-down meetings and escalate line issues if any

• Oversee manpower/overtime and consumables planning

• Ensure manufacturing and safety procedures are being followed

• Conduct training/coaching to leaders & operators to improve performance

• Implement ideas and improvement activities to prevent human errors

• Ensure good discipline and housekeeping in the line

• Coordinate with other departments to support projects, evaluations and preventive maintenance activities in the fab

Requirements

• Diploma/Degree in Engineering/Science/Production/IT

• Preferably experienced in high-tech, high-vol manufacturing environment

• Good leadership and communication skills

• Willing to work 12-hour shifts (day or night)

Position Summary

Production Supervisor is responsible to drive and meet the daily targets set, in addition to ensuring that the line complies with the SOP and has a Safety-First mindset.

Candidates with experience in fast paced semiconductor manufacturing environment are encouraged to apply for this position.

Key Responsibilities:

• Command and control the operations in the production line.
• Present daily production indices in module meetings and highlighting key priorities for the Engineering Team.
• Analyze WIP profile to minimize constraints in equipment, process, or manpower.
• Improve operational processes to enhance efficiency / productivity to meet standard cycle time.
• Address issues that affect bottlenecks by working with various departments.
• Drive for continuous improvement in the line.
• Actively lead and participate in 6S and kaizen events.
• Recommend and implement measures to motivate employees and to encourage employees to recommend ways to improve process, quality, safety and efficiency.
• Responsible for staff scheduling to include work assignments/rotations, employee training, shift rotations.
• Resolve or addresses production problems as they arise.
• Counsel and discipline production employees who fail to perform or violate company policies.

Requirements:

• At least 5 years of relevant experience in semiconduction production.
• Min. diploma qualification and above.
• Positive and can-do attitude as well as willingness to accept challenges.
• Demonstrate commitment to work and able to perform shift duties.
• Good analytical skills and initiative.

You are responsible for the day to day management of our custom-build job shop fabrication environment, to maximize productivity and cost-savings. This will require you to plan, implement and monitor work schedules and supervise the production process with various parties. You will also need to evaluate and resolve any production-related discrepancies and problems, as well as ensure meeting all permits required by regulatory authorities.

Responsibilities

• Work with the production team to innovate and improve existing fabrication processes.
• Develop and implement quality control measures to repeatedly deliver desired results.
• Oversee the maintenance of factory and equipment for maximum safety and efficiency.
• Adhere to statutory requirements and company enforced rules and regulations
• Coordinate with project personnel to receive/clarify customers’ requirements.
• Apply problem solving skills and work with production supervisors, draftsmen to derive fabrication solutions upon receipt of design drawings.
• Value engineer solutions to optimize cost savings.
• Plan production processes and allocate/deconflict resources for scheduling delivery.
• Track production output, cost and progress to ensure quality, budget and delivery targets are met.
• Coordinate and work with specialist vendors to ensure quality and project requirements are met.
• Lead, organize or participate in daily discussions to ensure smooth production operations.

Requirements

• Minimum Diploma or Bachelor degree in Engineering;
• At least 2+ years proven experience in production/industrial engineering; managerial experience a plus
• Familiarity with CAD software
• Proficiency using Microsoft Office
• Possess a wide breadth of knowledge in Engineering & materials know-how
• Excellent communication skills
• Ability to maintain positive vendor and client relationships
• Strong coordination skills, organized and an energetic people-person with an eye for details
• Self-driven, results-oriented, thorough and is able to work well under pressure
• Strong leadership, communication and interpersonal skills
• Strong analytical and problem-solving skills

Job Scope

• Operate production machines to meet output & quality, may handle two or more machines at the same time
• Perform sorting/cleaning/deflashing/quality inspection/packaging
• Ensure good housekeeping of work area
• Perform ad hoc duties assigned by Supervisor/Manager

Working Hours: 7am to 4.18pm, 5 day week

Requirement

• No work experience required
• Physically fit
• Good eye-sighted will be an added advantage
• Preferably entry level specialized in manufacturing/production operations or equivalent

Job Types: Full-time

Salary: $1,000 + Incentive + Allowance

Salary up to $1,900 per month

• Oversea routine production and production floor cleaniness
• Ensure that products are made to quality standards
• Troubleshooting and solving issue on production floor
• Min 3 year experience
• Required basic computer skill, and language skill

Job Summary

We are seeking a detail-oriented and skilled Production Technician to join our team. The ideal candidate will play a critical role in the assembly, subassembly, testing, and troubleshooting of robotic systems. They will ensure all production activities adhere to safety, quality standards, and work efficiently while contributing to continuous improvement initiatives.

Key Responsibilities

• Follow safety protocols, report hazards, and participate in safety initiatives.
• Inspect components and assemblies to meet quality standards and customer requirements.
• Assemble and test mechanical, electrical, and electronic components based on technical instructions.
• Perform wiring, soldering, and cable management, ensuring high-quality connections.
• Calibrate and test robotic systems and components to meet performance standards.
• Identify and resolve basic mechanical, electrical, or software issues during assembly and testing.
• Maintain accurate records of processes, test results, and modifications.
• Manage inventory levels, report shortages, and ensure tools and equipment are well-maintained and calibrated.
• Maintain an organized and efficient workspace by following 5S principles.
• Collaborate with engineers and cross-functional teams to improve processes and resolve challenges.
• Stay updated on new techniques, tools, and technologies.
• Support lean manufacturing, Kaizen, and other improvement initiatives.

Qualifications

• Education: Diploma in Mechanical, Electrical, Electronics, or Mechatronics Engineering, or a related field.
• Experience: 1 year experience in a production or assembly environment, preferably in robotics or a related industry.

Skills:

• Proficiency in mechanical and electrical assembly.
• Strong wiring, soldering, and cable management skills.
• Ability to read and interpret technical drawings, wiring diagrams, and work instructions.
• Basic troubleshooting of mechanical, electrical, and software issues.
• Familiarity with 5S and lean manufacturing principles.

Additional Requirements:

• Excellent attention to detail.
• Strong problem-solving and organizational skills.
• Ability to work collaboratively in a fast-paced environment.

PharmEng Technology, a leading consulting firm in the Pharmaceutical Industry, is looking for various Technician positions to fill for the Biotechnology Clean Room Good Manufacturing Practice and Good Laboratory Practice environment.

Great opportunity to enter the prospering Pharmaceutical Biotech Industry in Singapore

Good Career prospects, On-The-Job training will be provided for New Entrants career seekers with or without related experience

Various working hours available for different job roles:

1) Office Hours rotations - Minimum NITEC qualification, mixture of manual and technician level work

2) 12-hour day shifts, 2-3-2 work/off rotations - mixture of manual and technician level work

3) 12-hour permanent night shifts, 2-3-2 work/off rotations – Minimum NITEC or Diploma Holder only

Qualifications:

• Minimum NITEC or Diploma Holders
• Background in Pharmaceutical, Life and Food Sciences, Process Manufacturing, Engineering or equivalent welcome
• We are looking for individuals who are self-motivated with a positive attitude towards learning new skills, collaborative team player with a strong team spirit, enthusiastic and keen to join the Pharmaceutical biotech manufacturing industry.
• Diligent in documentation, adept at following instructions, committed to maintaining workplace cleanliness and safety at all times.
• Proficient in basic office software applications, fluent in English.

Key Responsibilities:

Various roles and responsibilities, cross functional support and collaboration, not limited to the below:

• Laboratory QC Microbiological Testing, Environmental Monitoring
• Samples Receipt and Management
• Equipment and Facility Management & Cleaning
• Method Validation and Qualification, In-Process Control
• Documentation and Compliance, Quality Assurance Support, Investigations and Deviations
• Certain roles will require manual heavy lifting as part of the job scope.

The contract is until 31 December 2025

You will be interviewed for your interest and suitability for the different roles available.

Shortlisted candidates will be contacted.

• Involve revese enginnering based on part given.
• Create the part drawing from the component by measuring and prepare the new cnc program.
• Lead a programmer and machinist to successfully deliver the cam program for precision machined component projects
• Work closely with senior management to prepare quotation and concept dedign for new projects
• Prepare and track schedules for live projects - manage deliverables targets by designers and drafters
• Train and groom new Cnc 3d cam programmer / machinist in company
• Create, maintain and enforce workflow processes to enhance design department efficiency
• Manage team KPIs

Manufacturing Supervisor Responsibilities:

• Hire and train employees.
• Maintain the production schedule.
• Evaluate production efficiency.
• Determine the quality of goods before shipping.
• Ensure that health and safety laws are followed.

Manufacturing Supervisor Requirements:

• A degree in mechanical engineering or related field.
• 4 years' of manufacturing experience.
• Excellent interpersonal and communication skills.
• Excellent time management skills.
• Ability to multitask.
• Knowledge of health and safety regulations.

Production Supervisor Responsibilities:

• Hire and train employees.
• Maintain the production schedule.
• Evaluate production efficiency.
• Determine the quality of goods before shipping.
• Ensure that health and safety laws are followed.

Production Supervisor Requirements:

• A degree in mechanical engineering or related field.
• 4 years' of manufacturing experience.
• Excellent interpersonal and communication skills.
• Excellent time management skills.
• Ability to multitask.
• Knowledge of health and safety regulations.

Production Supervisor Responsibilities:

• Hire and train employees.
• Maintain the production schedule.
• Evaluate production efficiency.
• Determine the quality of goods before shipping.
• Ensure that health and safety laws are followed.

Production Supervisor Requirements:

• A degree in mechanical engineering or related field.
• 4 years' of manufacturing experience.
• Excellent interpersonal and communication skills.
• Excellent time management skills.
• Ability to multitask.
• Knowledge of health and safety regulations.

Company Overview:

Qi Tian is a leading provider of custom full-home solutions, specializing in wood and iron structures for residential and commercial spaces. We pride ourselves on delivering high-quality, sustainable, and innovative products.

We are currently looking for a Production & Product Manager to join our dynamic team. This role is essential to streamline production processes, manage resources effectively, and ensure the delivery of exceptional products.

Key Responsibilities:

• Oversee the production line operations, ensuring optimal allocation of manpower, materials, and machinery.

• Develop and implement strategies to improve production efficiency and reduce waste.

• Manage inventory of raw materials, including wood and iron, and ensure timely procurement.

• Coordinate production schedules to meet customer demands and project deadlines.

• Supervise and train team members, fostering a culture of collaboration and excellence.

• Ensure adherence to quality standards and safety regulations.

• Maintain clear communication between production, logistics, and sales teams to ensure smooth operations.

• Provide technical expertise in board materials, including understanding specifications and applications.

Requirements:

• Proven experience in production management, preferably in wood or metal manufacturing.

• Strong knowledge of board materials (e.g., plywood, MDF, particleboard) and ironwork.

• Excellent organizational and problem-solving skills.

• Ability to optimize workflows and allocate resources effectively.

• Familiarity with production machinery and maintenance processes.

• Strong leadership and team management skills.

• Fluent in English; additional languages are a plus.

What We Offer:

• Competitive salary and performance-based incentives.

• Opportunities for professional development and career growth.

• A collaborative and innovative work environment.

Salary: $4500+commision, 6 days a week, 7 days leave a year, 7 days mc a year

Location: Singapore

If you are passionate about leading a production team and have a keen understanding of custom wood and ironworks, we want to hear from you!

How to Apply:

Send your resume and cover letter to [your email address]. Please include “Production & Product Manager Application” in the subject line.

Join us in shaping the future of custom home solutions!

About the Role:

As the manager of APAC-TSC (Technical Support Centre), he is responsible for formulating, enforcing and supporting in the countries of the APAC region for all repair services / technical issues. The contents of support include introduction of repair service & field service, understanding of service level (quality / cost improvement / WIP management) in BC, business improvement, and various problem solving. In addition, he is also in charge of contact work with Global manufacturing HQ (OMSC / OSTE / OSTA), and, as a Japanese expatriate, he is also the main contact point for technical services related to Olympus Tokyo.

Roles and responsibilities:

· Communicate with OT/OSTE/OSTA (Global HQ and MBC) and formulation and execution of regional (APAC area) technical/repair service strategy.

· Achieve APAC Medical Repair target and communicate with global HQ for consideration of revision necessity for the target.

· Create/submit periodical repair service activity report in English and Japanese language to explain regional repair service activities and the progress of medical repair service priority measures.

· Participate in global service meetings and make consensus for service strategy from a global perspective in English and Japanese language.

· Communicate with global HQ to input the request from APAC for new products and create the APAC medical repair service strategy for new generation products.

· Communicate with other regions to benchmark their activity and introduce that to APAC region.

· Reinforcement of repair reduction of medical equipment in corporate with global HQ and MBC.

· Examination and promotion of regional repair system optimization.

· Introduction of repair service & field service,

· Understanding of S-BC’s service level (quality / cost improvement / WIP management), and maintaining and improving the quality of regional repair services of endoscopy products.

· Improving of the cost structure that can contribute to the medical service business.

· Strengthening / optimizing the local organization of APAC technical service department and developing next leaders (localize).

· Compliance to CHIP/GDPMDS requirement.

About Olympus:

Our purpose at Olympus is to make peoples’ lives healthier, safer and more fulfilling. We do this through innovation. As a technology pioneer, we design and deliver solutions across our Medical division that make a positive contribution to society.

Our products are used to capture the medical and diagnostic images of our world, from the microscopic to the endoscopic. They are instrumental in furthering research, and for travelling inside the human body to help diagnose, treat and prevent illness.

Our commitment to customers and our social responsibility is the cornerstone of everything we do.

Why work at Olympus?

At Olympus, we are dedicated to fostering a high-performing culture, a collaborative environment, and enabling everyone to shine. Our common values of Patient Focus, Integrity, Innovation, Impact and Empathy, form the foundation of our culture and guide our behaviour, where our people feel like they are making a difference every single day.

Not only will you benefit from a meaningful, rewarding and challenging career, you will have access to a range of benefits:

· A competitive salary package including AWS and Variable Bonus

· 18 days of annual leave in your first year

· Health and Wellbeing initiatives (Annual Medical Checkups, Flu Vaccinations, Dental benefits, and Employee Assistance Programs)

What we are looking for:

· Possesses a Degree in Engineering with related experience in Marketing or a Degree in any Business discipline with related experience/knowledge of engineering in the medical field.

· Minimum 10 years of working experience, related work experience in the medical device industry (e.g. Field Service Engineer, Repair Engineering, Quality Engineering experience)

· Prior experience in field service engineering and service strategy planning in North Asia preferred

· Experience in leading planning for new-generation medical products in HQ

· Knowledge of Global repair service and market situation based on global HQ experience.

· Good relationship with other global regions based on global HQ experience.

· Professional knowledge of Medical Devices and Quality requirements

· Excellent interpersonal skills and presentation skills

· Must be proficient in MS Office (Excel (ability to understand and utilize formulas and functions), Power-point and Word).

· Excellent verbal and written English

· Fluency in the Japanese Language for daily communication with Japanese-speaking stakeholders, branch offices, and business partners.

Apply Now:

To submit your interest in this opportunity, select “Apply for this job”.

In the meantime, follow us on:

· LinkedIn - Olympus APAC

· Company website - www.olympus.com.sg

Exciting full-time and contract-based opportunities at Sproud

We are in search of a technically skilled Multi-media Post Production Producer who can handle projects across multiple media forms and push boundaries through experimentation.

The ideal candidate will be able to lead the project creatively and technically from the Post Production POV and collaborate with our cross-disciplinary interactive and production team and partners.

Open to Singapore citizens and PR only.
Aiming for a start date ASAP; flexible for the right fit.
Apply by 24 Jan 2025.

Send in your CV and portfolio to: [email protected]
Titled- Post Pro Producer for Sproud

--
hashtag#PostProductionJob hashtag#Fulltime hashtag#PostProducer hashtag#AR hashtag#Interactive hashtag#filming hashtag#Animation hashtag#TargetAudienceEducation

Sproud is a LearnTech company that focuses on producing objective-driven learning content for effective and sustained outcomes.

https://lnkd.in/g7ZmKzYm
https://lnkd.in/gQbMmirW

1. Able to handle meats processing, including chicken and pork, on daily basis to meet customers requirements

2. Able to work with little supervision

3. Willing to work at Bedok North (Gourmet East Kitchen) manufacturing facility and be prepared to be deployed on 6 days workweek.

4. Able to work in cold room temperature to process and pack meat items.

5. Ensure required workplace safety and hygiene standards are followed.

Requirements

1. Candidates will need to handle different types of meat and food items, depending on our customers orders.

2. Physically fit as work involved manual labour too.

To know more on the food items we sell, please check out our online marketplace portal, https://www.perfectfood.sg/.Only shortlisted candidate will be contacted.

Brief Description & Role

This position is responsible for testing, troubleshooting, and repairing RF components and systems. You will work closely with cross functional teams to ensure the quality and performance of RF equipment, ensuring that all devices meet the required specifications and standards.

Responsibilities

1. Work with business development, Engineering, system test and external customers to gather information and develop RF Test plans, specifications for product under test.
2. Perform RF testing using test equipment such as spectrum analyzer, noise figure meter, power meter, network analyzers, and signal generators.
3. Assembling/debugging the RF test system and device under test.
4. Hands on troubleshooting and repair of RF product till component level using RF and digital measurement tools & equipment.
5. Analyze test data and provide reports on yield.
6. Document test procedures, results, and any issues encountered during testing and debugging.
7. Assist in the development of new RF testing methodologies and best practices.
8. Do simple antenna parametric radiation measurement

Requirements

· Diploma /Bachelor in Electronics or Communication Engineering, or equivalence

· Preferably with at least 2 years of working experience in a product-based electronics manufacturing environment / product development.

Skills, Experiences & Knowledge

· Experience in automating test and measurements using bench test equipment.

· Knowledge of programming software in C, C#, Python or LabView.

· Experience with PCB design software

· Experience in antenna parameter measurement

· Preferably with soldering experience

· Excellent communication and documentation skills.

Job Overview

The future of technology is full of amazing possibilities that started in semiconductor manufacturing plants. Autonomous driving, drones, the Internet of Things – all of it is possible because of the breakthroughs in semiconductor manufacturing. From large dust-free factory to fully automated machines, this unmanned factory is not a dream but a testament of UMC daily operation in our contribution towards the future of technology. Join us and be part of UMC Smart Factory in managing complex production processes which allow you to experience first-hand on the operation of state-of-the-art factory and accelerate your growth!

Responsibilities

• Manage the production metrics of fully automated production lines
• Predictively identify and address possible production bottlenecks in a timely manner
• Coordinate resources to achieve daily production goals
• Lead in continuous improvement projects to increase productivity, staff operation efficiency and quality

Qualifications

• Possess at least a Bachelor's Degree in Electronic Engineering, Electrical Electronic Engineering, Chemical Engineering, Materials Science, Mechanical Engineering, Industrial Engineering, or Computer Science.
• At least 2 years of relevant working experience in semiconductor industry foundry
• Adept in project management as well as a strong sense of commitment
• Possess good communication skills in coordinating between relative parties
• Is self-demanding and committed to innovative solutions to complete tasks
• Proficiency in Excel(VBA) & SQL or Tableau for data analysis
• Able to commit shift work
• On duty required on weekend and Holiday
• Standby 24-hour for Fab Operation

Basic start $2600, after 3 months confirmation is $2700. Have OT pay.

Industry: Engineering

Located at Chai Chee

Japanese MNC

Have AWS + Bonus + Yearly increment

Job Description

• Perform, document internal audits and other quality assurance activities to ensure readiness on international standards certification audits and GMP inspection.
• Create, review work instructions and standard operating procedures, devise sampling procedures and directions for recording and reporting quality data.
• Communicating with other team members to solve problems.
• Conduct / perform training to employees to improve GMP / international standards certification awareness and compliance.
• Other duties as and when assigned by management.

Requirements

• Diploma in Engineering
• No experience / fresh entry welcome to apply

Applications:

Please submit a copy of your updated CV in MS Word format stating to [email protected]:

• Current Salary
• Expected Salary
• Date of Available and Reason for Leaving

All applicant will treated private and confidential

Emily Fong

Senior Talent Specialist

Atomrecruit Pte. Ltd. | MOM EA License No.: 15C7443

EA Personnel Reg No.: R1768368

Manufacturing Operator, Semi-Skilled Technician

- Quality Control Inspection.

- 5 Days work week. (Monday-Friday, 0800-1730)

- Salary $1600

- Perform any other ad hoc duties as assigned.

- No Experience can be applied.

- Training Provided.

- Great team player and collaborator.

- PR and Singaporean only.

** Interested applicants, can call 68444012 or email to [email protected]**

• Involve revese enginnering based on part given.
• Create the part drawing from the component by measuring and prepare the new cnc program.
• Lead a programmer and machinist to successfully deliver the cam program for precision machined component projects
• Work closely with senior management to prepare quotation and concept dedign for new projects
• Prepare and track schedules for live projects - manage deliverables targets by designers and drafters
• Train and groom new Cnc 3d cam programmer / machinist in company
• Create, maintain and enforce workflow processes to enhance design department efficiency
• Manage team KPIs

• Position : Production Application Lab Leader (SEC) - Gul - Up to $10k
• Location : Gul Avenue (Company Transport to Nearby MRT)
• Working hours : 5 Days Work Week – Monday to Friday: 9.00AM to 5.45PM
• Salary (commensurate with experience): Up to $10,000 + AWS + Performance Bonus + 12-18 Days Annual Leave
• Duration : Permanent
• Industry : Chemical Manufacturer

Responsibilities:

• Having a deep understanding of company products for the Semiconductor industry
• Keeping abreast of industry developments and market position/performance of comparable competitive products.
• Working with Sales team to select appropriate customer and application targets
• Visiting customers across the TAP territory to understand their equipment, process, and product performance requirements.
• Starting-up and operating company Wafer Processing and Failure Analysis lab
• Conducting product functional performance testing & measurements either on-site or coordinating with other Regions to generate test results remotely.
• Advising on laboratory upgrades needed to better serve customers
• Liaising with customers during qualification tests and providing trouble-shooting advice after installation
• Recommending the best product for the application based on product experience and/or laboratory trials
• Hiring and supervising at least one technician to maintain the lab and support customer trials
• Developing specifications and facility recommendations for local manufacturing of SEC products, either at company or third-party facilities
• Advise on hiring and lead training of operators for local manufacturing
• Set operating procedures, quality targets and release specifications for any eventual locally made semiconductor products
• Developing external collaborations with co-suppliers, Universities, or Government Research Institutes to strengthen our offering, improve our market visibility, or secure funding to advance our product offerings.

Requirements:

• Minimum Masters or PHD in Chemistry or Chemical Engineering
• Minimum 10 years of experience in Semiconductor Wafer Processing industries
• Willing to regularly travel to Asia countries (1-2 times per month), and less frequent travel to facilities in France and the US may also be required (1-2 times per year)

Email to: [email protected]

Do visit www.facebook.com/search.personnel and https://www.instagram.com/search.personnel for more job listings and career tips!

***We do not charge our candidates any referral fee nor bind them with any contract.***

Jeslyn Tan

Associate Consulting Director (APAC)

Reg no.: R21101247 | EA No: 13C6684

Thank you for your interest in this position. Our shortlisting period is 3 working days. Only shortlisted candidates will be contacted for further consideration.

If you do not receive communication from us within this timeframe, it's likely that your application has not been shortlisted by our client. In such cases, we recommend that you continue your job search to maximize your opportunities. We wish you all the best and should we have any suitable roles that match your experiences/ qualifications/ preferences, we will reach out to you.

• Position : Production Application Lab Leader (FFE) - Gul - Up to $8,000
• Location : Gul Avenue (Company Transport to Nearby MRT)
• Working hours : 5 Days Work Week – Monday to Friday: 9.00AM to 5.45PM
• Salary (commensurate with experience): Up to $8,000 + AWS + Performance Bonus + 12-18 Days Annual Leave
• Duration : Permanent
• Industry : Chemical Manufacturer

Responsibilities:

• Having a deep understanding of company products for the Electronics industry, including formulations and application specifics.
• Keeping abreast of industry developments and market position/performance of comparable competitive products.
• Working with Technical Service and Sales team to prioritize appropriate customer and application targets
• Recommending the best product for the application based on product experience and/or laboratory trials
• Conducting laboratory trials to win qualifications by optimizing product performance against customer specifications.
• Providing application guidance to Technical Service team regarding application and troubleshooting of company products in the field.
• Conducting product functional performance testing & measurements either on-site or coordinating with other Regions to generate test results remotely.
• Advising on laboratory upgrades needed to better serve customers
• Liaising with customers during qualification tests and providing trouble-shooting advice after installation
• Hiring and supervising at least one technician to maintain the lab and support customer trials
• Developing specifications and facility recommendations for local manufacturing of FFE products, either at TAP or third-party facilities
• Advising on hiring and lead training of operators for local manufacturing
• Setting operating procedures, quality targets and release specifications for any new products made locally
• Developing external collaborations with co-suppliers, Universities, or Government Research Institutes to strengthen our offering, improve our market visibility, or secure funding to advance our product offerings.

Requirements:

• Minimum Masters or PHD in Chemistry or Chemical Engineering
• Minimum 10 years of experience in Semiconductor Wafer Processing industries
• Willing to regularly travel to Asia countries (1-2 times per month), and less frequent travel to facilities in France and the US may also be required (1-2 times per year)

Email to: [email protected]

Do visit www.facebook.com/search.personnel and https://www.instagram.com/search.personnel for more job listings and career tips!

***We do not charge our candidates any referral fee nor bind them with any contract.***

Jeslyn Tan

Associate Consulting Director (APAC)

Reg no.: R21101247 | EA No: 13C6684

Thank you for your interest in this position. Our shortlisting period is 3 working days. Only shortlisted candidates will be contacted for further consideration.

If you do not receive communication from us within this timeframe, it's likely that your application has not been shortlisted by our client. In such cases, we recommend that you continue your job search to maximize your opportunities. We wish you all the best and should we have any suitable roles that match your experiences/ qualifications/ preferences, we will reach out to you.

1 year contract through employment agency payroll

If you are a Singaporean with at least a Diploma in IT, good hands on experience with SQL and Linux, and are able to work shift hours (including nights, weekends, and public holidays), with an expected salary of up to $4200, feel free to apply

This role involves supporting the Development team, ensuring app runs smoothly, conduct health checks, recovery and other related tasks

Requirement:

• Singaporean
• Must have Intermediate knowledge and good hands on experiences using SQL and basic in Linux
• Must be able to commit to working shift hours, even on night shift, weekends and public holidays
• Need to pass Hackerrank assessment and demonstrate proficiency in SQL and Linux during the technical interview
• Diploma / Degree in IT or Computer Science
• At least 1 year working experience in IT
• Need to have eagerness to learn and perform with commitment
• Willing to serve 2 months notice if join to work in this project

Work Location: Changi Business Park
Monthly salary inclusive of allowance: $3300 to $4200 (company does not offer bonus)

Below is the Shift Timing (Working 5 days a week, involves rotating shift and support including night shift, weekends and public holidays)

• Morning shift: 6am to 3pm
• General shift: 9am to 6pm
• Afternoon shift: 2pm to 11pm
• Night shift: 10pm to 7am

Transport is claimable - before 7am (for morning shift 6am to 3pm), after 11pm (afternoon shift 2pm to 11pm)

Junior L2 Production Support (Java-base)

• Experience in Unix commands, SQL queries
• Recent experience in working with Java J2EE applications
• Experience in application support role for min 1 years for support or Developers willing to learn with good knowledge of Java, Unix, SQL
• Experience in programming languages such as JAVA/J2EE.
• Knowledge of web applications, batch jobs, JBOSS, MariaDB, SQL, Shell
• Knowledge of Job scheduling, MQ setup, C:D setup experience is a plus
• Exposure to banking industry is a plus
• Dynamic individual with thirst to learn
• Strong team player with excellent inter-personal skills
• Ownership oriented and ability to meet SLAs with no compromise on the quality of the work

For interested applicants, do apply directly on this link - https://beex.breezy.hr/p/ce28deac9ab7-manufacturing-engineer

Your Role

As the Manufacturing Engineer, you will report directly to the Chief Technology Officer (CTO). Your daily schedule will include frequent interactions with a multi-disciplinary team, across teams from design to manufacturing to operations. You will need to work in Singapore. Remote work is not an option.

Your Job Scope

• Manufacturing Plan: Coordinate with engineering and production departments to develop and implement Manufacturing Plan for products, by drafting work instructions & test plans, preparing BOMs, communicating to suppliers and training manufacturing personnel.
• Technical Support and Diagnosis: Technical support and troubleshooting of production issues related to equipment, processes, quality, controls, and systems. Identify defects or deviations from quality standards and perform root cause analysis to determine the underlying reasons for these issues
• Quality: Upkeep work quality on the manufacturing floor, by implementing quality control procedures such as: comprehensive incoming and outgoing quality inspections, compliance to work instructions, and implementing corrective actions on any lapses
• Record-keeping: Maintain detailed records of quality tests, inspections, and audits. Generating reports on quality performance and communicating quality issues to relevant stakeholders.
• Continuous Improvement: Identify areas of improvement from assembly procedures to tooling, to enhance product quality, manufacturing efficiency, and reduce defects
• Training: Provide training to staff on quality standards, procedures, and best practices to ensure that quality requirements are consistently met
• Supplier Quality Management: Collaborating with suppliers to ensure that raw materials and components meet quality specifications and standards.
• Compliance with Regulations: Ensuring that manufacturing processes comply with industry regulations, standards, and best practices to meet legal requirements and customer expectations.
• Provide day-to-day technical and engineering support to the operating areas.

Desired Qualities

• (MUST) Bachelor's Degree in Electronics, Computer or equivalent Engineering
• 3-6 years of experience in quality engineering or in manufacturing
• Working knowledge of product development and manufacturing processes
• Experience with quality control and test procedures for tests such as in EMI-EMC, Vibration, temperature, humidity testing is a plus.
• Experience with Altium designer and other equivalent PCB CAD software.
• Experience with any 2D schematic, wire harnessing and cable assembly design software.
• Good analytical and problem-solving skills
• Able to multi-task and able to work in a fast-paced environment
• Excellent written and verbal communication skills
• Ability to work in a cross-functional team environment
• Excellent organization and time-management

Remuneration Package

• Market competitive salary
• Growth opportunities that align with your direct ability in helping the company, rather than an arbitrary corporate ladder
• Support for skills upgrading / learning credits
• Healthcare support
• Special access to industry events
• Well-stocked pantry with nice snacks

Seeking Singaporean with min 4 years good working experiences as L2 Production or Application Support with strong skillsets of Linux and SQL and able to work shift hours on-site to provide 24x7 operational support including weekends and holidays as per assigned roster

1 year contract under employment agency payroll

Work Location: Changi Business Park

Monthly salary inclusive of allowance: $4600 to $5600 (company does not offer bonus)

Below is the Shift Timing (Working 5 days a week, need to support including night shift, weekends and public holidays)

• Morning shift: 6am to 3pm
• General shift: 9am to 6pm
• Afternoon shift: 2pm to 11pm
• Night shift: 10pm to 7am

Transport is claimable - before 7am (for morning shift 6am to 3pm), after 11pm (afternoon shift 2pm to 11pm)

Jobscope:

• Provide 24x7 operational support for all production practices including weekends and holidays for Bank Security Apps
• Ensure system availability 24x7. Perform system Recovery in the event of system incapacity or outages.
• Provide technical expertise to facilitate investigation of complex technical issues in a timely and efficient manner.
• Possess strong understanding of technical and subject matter expertise that can be leveraged to identify and resolve issues in a timely fashion.
• Monitor System health check & work towards continuous improvement to prevent system issues by early problem detection. Automate the daily monitoring and manual operations to improve system resiliency and stability.
• Regular health-check and capacity assessment of Production environment from BAU growth perspective and incoming project volume.
• Manage end to end Incident Management including investigation, recovery of service, and post recovery follow up on corrective/ preventive actions.
• Manage customer queries and close reported incidents within agreed SLA with business. Work with different stakeholders including business, infrastructure and application support teams to resolve the issues.
• Work with infra support including Middleware, DBA and SAs on system maintenance & infra related issues troubleshooting.
• Work on application BAU related tasks & projects, e.g. DR exercise, audit queries, SOP documentations update, system upgrade for EOS/EOL components, etc
• Ensure strong governance on Change Management Process, Data protection and Priviledge ID access control.
• Work in shift on-site to provide 24x7 operational support including weekends and holidays as per assigned roster. Roster is 5-day work per week. Those on shift on weekends/ public holidays will be given off on weekday
• Must have 4 years good working experiences as L2 Production or Application Support with strong skillsets of Linux and SQL