Job Description:

• Overall in charge of site coordination.
• Manage and oversee the day-to-day construction activities of the project.
• Monitor and control the general workers' deployment on-site.
• Manage job costing against the work scope.
• Carry out work scheduling, material requisition planning, project coordination, and documentation.

Job Requirements:

• Minimum 02 years of related work experience in a similar capacity in the local construction industry.
• Able to multi-task and workvwithin tight schedules and deadlines.
• Strong leadership and problem-solving skills.

Team player and good communication skills with clients, consultants, sub-contractors and site staff.

Responsibilities:

• Assembly of Robots
• Configuration & testing of devices and sensors used in Robotics applications
• Support on Application Test Program and Hardware Development before release
• Run R&D tests and Factory Acceptance Tests for products
• For relevant components serial numbers registration
• Basic troubleshooting for robots in production floor area
• Documentation on SOPs, test procedure
• Any other ad-hoc duties assigned

Requirements:

• Undergraduate/Diploma in Mechatronics, Electrical or Mechanical Engineering

Job Description：

• Facilitate effective interaction among key team players. Engage, assist and support team members in Daily Operations Level 1 meeting.
• Shift arrangement and job assignment to production operators to meet production process objectives. Monitor & Report overall production process by shift to meet required standards on safety, sanitary and process.
• Assist Production executive on daily control of the production output, material usages, losses, rejects and breakages and issues analysis.
• Assist Production executive on daily control of the material usage and stock leveling
• Provide fundamental operational and technical coaching to team members
• Handle projects that related to improve the productivity, reduce wastage & spoilage
• Perform Basic Equipment Care for assigned equipment to minimize inefficiency
• Perform Products Quality Check on the line
• Accurate and on time machine operation breakdown report, Able to operate all equipment of assigned line
• Manage assigned all equipment's process at assigned line
• Perform Operation in compliance with safety, QA and Production standards Relieve all equipment's' operation in times of lunch, break and dinner
• Perform basic troubleshooting and assist in troubleshooting analysis
• Full compliance with company policy and regulations in responsible areas.

Requirements：

• NITEC Certification or equivalent with at least 4 years of technical experience
• More than 3 years working experience in production/manufacturing.
• Familiar with wood works production process

PPP Coffee, formerly known as Papa Palheta, is a leading specialty coffee roaster in Singapore, with 15 years of sourcing, roasting and serving specialty coffee to the community through its owner-operated F&B outlets, as well as its network of over 50 partner cafes, restaurants and offices.

Join us as a member of the roasting team, roasting specialty coffee to the high quality standards. This is a role for you if you are detail-oriented, have a strong interest in coffee, and are looking to learn about roasting as well as the various segments of the specialty coffee industry in Singapore.

Job Responsibilities

• Roast and blend various types of specialty coffee beans
• Operate roasting machines with Cropster roasting software
• Prepare green coffee for roasting
• Package coffee for retail, online & wholesale orders
• Maintain roasting equipment
• Evaluate green coffee samples through cupping
• Record data from production roasts
• Taste and evaluate roast profiles for constant improvement

Job Requirements

• Strong interest in coffee
• Prior roasting experience beneficial but not required
• 1-3 years working in coffee, production, or warehouse/fulfilment role
• Detail-oriented and willing to learn
• Physically fit and able to carry heavy loads
• 5-days work week

Company Benefits:

• Complimentary non-alcoholic drinks
• Family & friends discount on food & beverage
• Staff discounts on food & beverage
• Lifestyle Benefit - Entertainment, Grooming, Dental & Medical

Our Client is in the Manufacturing Industry. Due to their current expansion plan, they are looking for a Manufacturing and Production Engineer to join their team, in hopes of developing the current high performing team. They are located in the West.

Responsibilities

• Offer continuous technical support to contract manufacturers, resolving electronic engineering issues encountered during production.
• Work closely with manufacturers to establish and uphold rigorous quality control standards, ensuring reliable and consistent product performance.
• Analyze manufacturing workflows to identify and implement process improvements that boost efficiency and productivity.
• Address and resolve electronic engineering challenges to prevent production delays and minimize defects.
• Collaborate with design and development teams to implement design enhancements that improve product quality and streamline manufacturability.
• Coordinate investment audits with cross-functional teams, conduct regular physical asset inspections, and assist with annual inventory checks as needed.
• Any ad-hoc duty as given

Requirement

• Min Bachelor's degree in Electronic Engineer or a related field
• Min 4 years in EMS - Electronic device assembly
• Good understanding in overall supply chain, manufacturing technology, process set-up, process validation and SOP support
• Knowledge and experience in manufacturing, planning, quality, SAP, PLM
• Knowledge and experience in wearable electrical device's assembling
• Comfortable to travel overseas often

Interested candidates who wish to apply for the advertised position, please click APPLY NOW or email an updated copy of your resume/cv.

We regret that only shortlisted candidate will be notified.

Recruitpedia Pte. Ltd.

EA License No. 19C9682

EA Reg. No. R21103987 (Yan Yongmao)

• Working day: 5 days
• Location: Tuas
• Benefits: Performance Bonus, Medical Claim, Annual Salary increment, etc.

Job Scope：

• Coordinate collection of completed jobs, generate necessary shipping documents, and notify relevant departments.
• Expedite and verify packing lists and delivery orders, follow up with logistics and finance, and handle incoming deliveries and customs.
• Oversee “Ship to” items for overseas suppliers and coordinate with packing and production teams.
• Manage direct and indirect materials, identify and select suppliers, improve supply chain strategies, monitor deliveries, and ensure compliance.
• Schedule and coordinate truck transportation and driver logistics.
• Participate in programs like TQM, Lean Manufacturing, and social activities.
• Manage coupons, reports, transaction entries, visitor reception, calls, courier arrangements, and any assigned duties.
• Maintain a clean, safe work area, and comply with safety guidelines and company policies.

Requirements:

• At least 1-2 years of relevant experience

Aurora Asia Pacific (21C0671)|Ying Kee (R21103783)

Job Specifications (Plant Based Food Manufacturing)

· Provide expertise in equipment and production process of beverage manufacturing, including Can Filling and PET lines.

· Manage and execute production operations, processes and routines.

· Ascertain that all processes are carried out in accordance to the company's food safety policies and GMPs.

· Monitor, control and improve product quality, ensuring the products are produced within standard of quality, productivity and costs.

· Identify and resolve operational problems in a timely manner to prevent any mishandling and production delay.

· Initiates and implements process improvements and maintain production SOPs.

· Implement workplace safety and health, GMP and HACCP required for plant operation.

· Plan and organize manpower including recruit, train and onboard new employees and production workers.

· Oversee operations to ensure safety.

· Develop plans that help operations run smoothly.

· Create and manage budgets.

· Collect and review data to reduce inefficiencies and waste.

· Analyse data and create reports to present to executives regarding processes.

· Evaluate employees and give suggestions for improvement.

· Oversee work schedules to ensure coverage.

· Perform routine safety checks on equipment

Job Requirements

· Minimum Diploma in Food/Beverage Technology, Engineering, or equivalent.

· Minimum 5 years' work experience in Food manufacturing environment.

· Established Leader; Has ability to motivate a team of operators, Technicians and Supervisors.

· Strong knowledge of implementing and maintaining high GMP/HACCP standards.

· Experience in implementing workplace Safety & Environmental regulations

The duties & responsibilities will include but not limited to:

· Coordinate and execute the product runs based on the schedule provided by planners and liaise with the production planner on any change or delay in the production schedule.

· Ensure production processes are being carried out according to company and regulatory requirements

· To ensure operator executing production activities by complying to food safety standard with required product quality.

· Ensures all documentation necessary for regulatory compliance is completed accurately.

· Monitor and control of inventory ensure balancing of Raw, unitized and packaging materials include SAP data entry.

· Minimize product loss and maximize plant efficiency by collect and compiles production data. (e.g. Yield and losses, Downtime and Production line efficiency)

· Work closely with site management team to optimize production planning with ongoing activities such as maintenance stops, project works, etc

· Updating Pro-soft including validating staff timesheets, Overtime and transport claims.

· Maintain and verify Production Report and Perform daily visual inspection in the plant.

· Maintain plant safety by providing daily briefing. (e.g. Toolbox meeting & RA briefing).

· Ensure the safe use of equipment and schedule for equipment inspections and training.

· To prepare work schedules and assign workers production line tasks provide the best and safe working environment possible.

· Root Cause Analysis. To trouble-shoot, identify the problems and provide solutions. Prepare Incident Report and staff Counselling report.

· Backup line leader when short of manpower.

· Assist to resolve employee issues and disputes.

· Identify issues to improve efficiency and suggest improvements via SGA.

· Provide coaching and guidance to the operator to meet company goals and continuous improvement.

· Organize and develop workers skills, establish job expectations and evaluate work performance.

Requirements:

· Min Diploma or equivalent with at least 2 years relevant experience in F&B manufacturing environment

· Good knowledge of GMP & WSH requirement

· Experience in managing people

. Computer Literacy (Excel, Word, Power Point, SAP)

Job Description:

1. In charge of the preparation of reagents, calibration materials, and quality control products, strictly follow SOP, keep all records in the receipt, review, and use of raw and supplementary materials, monitor the stock condition and work with procurement team to replenish accordingly.

2. Responsible for the collection and bookkeeping of raw materials, auxiliary materials, packaging materials, etc. for production.

3. Responsible for filling in production logbook to ensure that the data is true, complete and accurate.

4. Ensure production equipment, facilities and production environment can meet production process and regulatory requirements.

5. Ensure employee working environment and quality in strict accordance with the system and regulatory requirements.

6. Strictly comply with laboratory-related operation and quality management requirements.

7. Collaborate with cross-functional teams to meet projects goals with overall organizational objectives.

8. Any other ad-hoc duties or projects as required by the management team.

Job Requirements:

1. Systematically project management, good planning, execution and timely communication. Good presentation skills.

2. Enthusiastic, proactive, and down-to-earth work attitude, strong communication & execution ability, results driven, and a team player.

3. Meticulous and strong sense of responsibility; able to handle stress and tight schedule.

• Company bus pickup from Ang Mo Kio, Jurong East, Boon Lay
• CNC Manufacturing
• MNC (Good remuneration)

1. Assistant Production Engineer (Mechanical)

Job Responsibilities:

• Perform basic and advanced machine assembly works
• Develop mechanical testing jigs & fixtures and perform testing and validation of machines
• Lead the production team to strictly adhere to production schedule and same time improving the manufacturing process to improve quality, cost, and productivity
• Creates, implements, and monitors KPI indicators on product quality and section capability
• Provide shop floor feedback to Production Engineering and D&D Department
• Assist the Production Manager to provide quality, cost effective and efficient support for launching of new machine models
• Perform machine mechanical setting and inspection checks according to YS standard
• Able to troubleshoot and resolve machine any kind of mechanical non conformance
• Perform machine final mechanical inspection and adjustments for any defects to maintain high level of quality
• Prepare reports on productivity, quality, claims, etc
• Work with engineering and other departments to improve assembly processes
• Monitor the serviceability of measuring instruments or jigs and fixtures and reporting to Supervisor or Manager any non-compliance condition
• Maintain accurate records of inspection result at each electrical process

Job Requirements:

• Bachelor Degree or Min Diploma (Mechanical) required
• 0-3 years working in a machine assembly environment
• A good track record of supporting the department achieving KPI
• Strong understanding of 5S and HSE knowledge
• Able to work effectively in a fast and ever-changing stressful environment
• Maintain good Quality standards, 5S and safety discipline
• Well verse in Microsoft office (Excel, Words, PowerPoint and Outlook)
• Knowledge of drawing software (SolidWorks, Unigraphic, etc) is added advantage

2. Assistant Production Engineer (Electrical)

Job Responsibilities:

• Perform basic and advanced machine electrical wiring works
• Develop electrical testing jigs and perform testing and validation of machines
• Lead the production team to strictly adhere to production schedule and same time improving the manufacturing process to improve quality, cost, and productivity.
• Creates, implements, and monitors KPI indicators on product quality and section capability
• Provide shop floor feedback to Production Engineering and D&D Department
• Assist the Production Manager to provide quality, cost effective and efficient support for launching of new machine models
• Perform machine pre & post machine power ON inspection checks, machine parameter settings, testing and inspection according to standard
• Able to troubleshoot and resolve machine electrical non conformance
• Perform machine final electrical inspection and adjustments for any defects to maintain high level of quality
• Prepare reports on productivity, quality, claims, etc
• Work with engineering and other departments to improve assembly processes
• Monitor the serviceability of measuring electrical instruments or jigs and fixtures and reporting to Supervisor or Manager any non-compliance condition
• Maintain accurate records of inspection result at each electrical process

Job Requirements:

• Bachelor Degree or Min Diploma (Electrical) required
• 0-3years working in a machine assembly environment
• A good track record of supporting the department achieving KPI
• Strong understanding of 5S and HSE knowledge
• Able to work effectively in a fast and ever-changing stressful environment
• Maintain good Quality standards, 5S and safety discipline
• Well verse in Microsoft office (Excel, Words, Powerpoint and Outlook)
• Knowledge of drawing software(Solidworks, Unigraphic, etc) is added advantage

HOW TO APPLY:

Interested applicants, please click on “Apply Now” and provide the below details in your resume.

We regret only shortlisted candidates will be notified.

Trust Recruit Pte Ltd
EA License No: 19C9950
EA Personnel: Ding Xin Er
EA Personnel Reg No: R22106669

• Company bus pickup from Ang Mo Kio, Jurong East, Boon Lay
• CNC Manufacturing
• MNC (Good remuneration)

1. Assistant Production Engineer (Mechanical)

Job Responsibilities:

• Perform basic and advanced machine assembly works
• Develop mechanical testing jigs & fixtures and perform testing and validation of machines
• Lead the production team to strictly adhere to production schedule and same time improving the manufacturing process to improve quality, cost, and productivity
• Creates, implements, and monitors KPI indicators on product quality and section capability
• Provide shop floor feedback to Production Engineering and D&D Department
• Assist the Production Manager to provide quality, cost effective and efficient support for launching of new machine models
• Perform machine mechanical setting and inspection checks according to YS standard
• Able to troubleshoot and resolve machine any kind of mechanical non conformance
• Perform machine final mechanical inspection and adjustments for any defects to maintain high level of quality
• Prepare reports on productivity, quality, claims, etc
• Work with engineering and other departments to improve assembly processes
• Monitor the serviceability of measuring instruments or jigs and fixtures and reporting to Supervisor or Manager any non-compliance condition
• Maintain accurate records of inspection result at each electrical process

Job Requirements:

• Bachelor Degree or Min Diploma (Mechanical) required
• 0-3 years working in a machine assembly environment
• A good track record of supporting the department achieving KPI
• Strong understanding of 5S and HSE knowledge
• Able to work effectively in a fast and ever-changing stressful environment
• Maintain good Quality standards, 5S and safety discipline
• Well verse in Microsoft office (Excel, Words, PowerPoint and Outlook)
• Knowledge of drawing software (SolidWorks, Unigraphic, etc) is added advantage

2. Assistant Production Engineer (Electrical)

Job Responsibilities:

• Perform basic and advanced machine electrical wiring works
• Develop electrical testing jigs and perform testing and validation of machines
• Lead the production team to strictly adhere to production schedule and same time improving the manufacturing process to improve quality, cost, and productivity.
• Creates, implements, and monitors KPI indicators on product quality and section capability
• Provide shop floor feedback to Production Engineering and D&D Department
• Assist the Production Manager to provide quality, cost effective and efficient support for launching of new machine models
• Perform machine pre & post machine power ON inspection checks, machine parameter settings, testing and inspection according to standard
• Able to troubleshoot and resolve machine electrical non conformance
• Perform machine final electrical inspection and adjustments for any defects to maintain high level of quality
• Prepare reports on productivity, quality, claims, etc
• Work with engineering and other departments to improve assembly processes
• Monitor the serviceability of measuring electrical instruments or jigs and fixtures and reporting to Supervisor or Manager any non-compliance condition
• Maintain accurate records of inspection result at each electrical process

Job Requirements:

• Bachelor Degree or Min Diploma (Electrical) required
• 0-3years working in a machine assembly environment
• A good track record of supporting the department achieving KPI
• Strong understanding of 5S and HSE knowledge
• Able to work effectively in a fast and ever-changing stressful environment
• Maintain good Quality standards, 5S and safety discipline
• Well verse in Microsoft office (Excel, Words, Powerpoint and Outlook)
• Knowledge of drawing software(Solidworks, Unigraphic, etc) is added advantage

HOW TO APPLY:

Interested applicants, please click on “Apply Now” and provide the below details in your resume.

We regret only shortlisted candidates will be notified.

Trust Recruit Pte Ltd
EA License No: 19C9950
EA Personnel: Ding Xin Er
EA Personnel Reg No: R22106669

• Well Established Company
• Basic $3200 - $3800 + AWS + Variable Bonus
• Excellent Welfare and Benefits + Career progression
• Working location: Boon Lay
• Working day: Monday to Friday
• Working hours: 8.30am to 6.30pm

Job Responsibilities:

• Lead and supervise a team of QC inspectors overseeing daily QC inspections activities in compliance with established standards
• Provide training, coaching and mentoring to enhance the skills and performance of team members
• Prepare and maintain work schedule for the department to ensure optimize resource for overall efficiency
• Work with cross-functional teams to implement continuous improvement, track status of non-conformities and CAPA effectiveness
• Responsible for review and approval of DHR. Ensure quality records and samples are retained complying with good writing practice GDP requirements
• Implement quality documentation changes, such as QC procedures, process workflows, work instructions, etc. Guide the team to follow through the change
• Review and submit validation or verification measurement reports
• Perform daily process audit to meet quality operational requirements
• Ensure product identification and traceability of product are in place
• As calibration administrator, ensure equipment are calibrated correctly, provide accurate measurements and having proper identification
• Assist in customer complaint analysis, investigation of quality issues and corresponding improvement measures
• Authorize the release (COC) of products, COA review and approval
• Adhere to safety protocols and implement preventive measures to maintain a safe working environment
• Monitor and report KPI of QC team job performance, production quality trends, quality control charts, etc.
• Any other tasks as assigned by the superior

Job Requirements:

• Possess minimum professional certification / Diploma / Degree in relevant subject area
• Working knowledge on ISO13485:2016 and quality assurance / quality control of medical devices is an added advantage
• Familiar with use of various quality control tools and test equipment

Candidates are encouraged to apply this position via Apply Now button with the following information in the resume

• Work experiences and job responsibilities
• Current and Expected salary
• Reason for leaving
• Date of availability
• Education background

We regret that only shortlisted candidates will be contacted.

LIONG ZHAO GUAN (R22107632)

EA Recruitment Pte Ltd

EA License No: 21C0492

Key Responsibilities:

• Assist the Production Manager to plan the production schedule.
• Monitor day-to-day operation to ensure the operation is smooth and meets the production schedule.
• Ensure that the entire operations are following EHS, Good Manufacturing Practices (GMP), and Standard Operation Procedure (SOP) requirements with good quality culture.
• Ensure the documentation record and plant 3S is properly maintained.
• Review production process and documents daily (Batch record, log sheet, check sheet, etc.).
• Feedback, investigate and submit reports on operation abnormality, incidents, etc.
• Training, coaching, and motivating staff to meet the present and future needs of the manufacturing operations, cultivating a good quality culture mindset within the department.
• To take charge of Work In Progress (WIP) check weekly and monthly, provide WIP & Production report.
• Assist Production Manager to liaise with suppliers or contractor.
• Contribute ideas for continuous improvement (Work procedure, Cost deduction, Automation, EHS, etc.).
• To perform other tasks in the manufacturing division as and when required.
• To work independently with minimum supervision, be resourceful and self-motivated.
• Take charge of departmental employee attendance checking and submission.

Requirements:

• Minimally Bachelor's Degree in Chemistry, Chemical Engineering or any relevant fields.
• At least 2 years of relevant working experience in an API pharma supervisory role.
• Independent and fast learner with a positive attitude.
• Process automation and IT knowledge will be an advantage.

Position: Production Engineer / Executive

• Location: Tanjong Penjuru
• Working hours: Mon to Fri from 7:30am to 5pm
• Salary: $3,500 - $4,000

Requirements:

• Min 5 years working experience in manufacturing environment.
• Able to supervise and lead the subordinates.
• Computer literate.
• Knowledge in ISO is an advantage.
• Diploma or Degree in Manufacturing / Electrical /Mechanical / Engineering discipline

Responsibilities:

• Organize, monitor and ensure manufacturing processes operated with minimize manufacturing costs through effective utilization of manpower, equipment, facilities, materials, and capital.
• Initiates, implements, and manages the processes improvement program based on best practices in the metal drum making industry, with an emphasis on productivity and product quality.
• Ensure all manufacturing processes are adhering to all Regulatory and Statutory Requirement.
• Work with the HR Department and assure that employee grievances are addressed in a timely fashion.
• Conducts employee performance reviews based on job descriptions to determine competency, knowledge, and contribution of the maintenance technicians and engineering staff.
• Maintain and ensure work safety and practice. Also continually improve safety records by addressing both physical safety issues and employee safety attitudes.
• Maintain and improve housekeeping in all areas
• Evaluate, train and maintain individual skills (including work performance) are keeping up to date with best engineering management concepts and practices.
• Ensure on time submission of overtime record to HR Dept for computation of monthly salary
• Establish and prepare process documentation such as work instruction, process specifications and assist on the quality plan.
• Prepares reports, analyzes data, and makes recommendations for improving plant operations and solving production-related problems.
• Ensures that subordinates are adequately trained, equipped, and motivated so that the maintenance program can be accomplished in a safe, timely, and cost-effective manner.
• Conducts employee performance reviews based on job descriptions to determine competency, knowledge, and contribution of the staff.
• Communicate regularly with all production and maintenance teams, both individually and as a group, to ensure good two-way communication concerning production and maintenance issues.
• Assist in the hiring of production personnel.
• Maintain and update operating manuals for all the manufacturing equipment and facilities.
• Maintain and update operating training manuals for all manufacturing processes.
• Perform any other ad-hoc projects or tasks to be assigned by the HOD / Management from time to time.

Chin Wai Loon Reg No: R24121618

The Supreme Hr Advisory Pte Ltd EA No: 14C7279

Responsibilities

• Collaborate with internal teams, including sales, marketing, and customer service, to assess and adjust production schedules based on demand fluctuations, customer orders, and inventory status.
• Coordinate closely with procurement teams to ensure that raw materials and components are available in a timely manner, and work with suppliers to meet lead time and quantity requirements.
• Conduct Material Requirements Planning (MRP) analysis to assess raw material needs, identify any shortages, and align procurement with production schedules.
• Monitor and manage inventory levels, working with warehouse teams to prevent overstock or stockouts, and implement strategies to optimize inventory turnover.
• Oversee the production scheduling process, balancing workloads across teams to ensure timely order fulfillment and smooth coordination with production to avoid bottlenecks.
• Track and analyze production data to identify trends, assess key performance indicators (KPIs), and implement improvements for greater efficiency, reduced lead times, and risk mitigation.

Requirements:

• At least 1 year of experience in production planning, logistics, or supply chain management, preferably in a manufacturing environment.
• Strong problem-solving and organizational skills with the ability to identify process improvements and streamline operations.
• Excellent communication skills to coordinate across departments and with external suppliers to align production and inventory needs.
• Proficient in using planning and inventory management systems, with a solid understanding of MRP, forecasting, and scheduling processes.

Please submit your updated resume in Word format by using the Apply Now Button.
We regret that only shortlisted candidates will be notified.

Email resume to [email protected]

People Profilers Pte Ltd, 20 Cecil Street, #08-09, PLUS Building, Singapore 049705.
Tel: 6950 9724

http://www.peopleprofilers.com
EA License Number: 02C4944
Registration Number: R1872398

Posting Personnel: Ng Jwee Ken

Ref: QWVWX979

1. Operate and maintain manufacturing equipment, such as assembly machines, conveyors, and packaging machinery, to ensure optimal productivity and efficiency.
2. Monitor production processes, identify any issues or deviations from specifications, and take corrective action as necessary.
3. Conduct regular quality checks and inspections throughout the production process to ensure adherence to product specifications and quality standards.
4. Collaborate with cross-functional teams, including engineers and quality control personnel, to troubleshoot equipment malfunctions, resolve production issues, and implement process improvements.
5. Follow standard operating procedures (SOPs) and work instructions to ensure consistent and accurate production outcomes.
6. Maintain accurate production records, including batch records, equipment logs, and quality control documentation.
7. Perform routine preventative maintenance on production equipment to ensure optimal performance and minimize downtime.
8. Adhere to safety protocols and guidelines to maintain a safe working environment.
9. Participate in training programs and stay updated on industry trends and advancements in manufacturing technology.
10. Provide support in other areas of the production process as needed.

Manufacturing Production Technician Required Skills

1. Strong mechanical aptitude and technical skills to operate and troubleshoot manufacturing equipment.
2. Excellent attention to detail and ability to follow precise instructions and procedures.
3. Strong problem-solving and analytical skills to identify and resolve production issues.
4. Ability to work effectively in a fast-paced and dynamic production environment.
5. Good communication skills to collaborate with cross-functional teams and report any production issues or equipment malfunctions.
6. Basic computer proficiency to enter and retrieve data, as well as use production software and systems.
7. Knowledge of lean manufacturing principles and practices is desirable.
8. Familiarity with quality control procedures and techniques.
9. Ability to adapt to changing priorities and work well under pressure.

Required Qualifications

1. Diploma or equivalent. Additional technical certifications or vocational training in manufacturing or related fields is a plus.
2. Proven experience working in a manufacturing environment, preferably as a production technician or a similar role.
3. knowledge of IPC 620 or 610 a plus.
4. Knowledge of manufacturing processes, equipment, and quality control standards.
5. Familiarity with safety protocols and procedures in a manufacturing setting.
6. Ability to lift heavy objects and stand for extended periods.
7. Willingness to work flexible hours, including evenings and weekends, as required.

Job Scope:

You will be responsible for the end-end recruitment process, including but not limited to: compliant job postings, job launch, sourcing, phone screens, assessments, candidate tracking and status updates, interview feedback, conveying compensation expectations and offer extension. In addition, you will also coordinate recruiting process activities with key partners, hiring/closing candidates, and understand the full recruitment life cycle.

Essential Responsibilities:

• Responsible for blue collar volume hiring, both internal and external hires for the Singapore Plant
• Responsible for the wing-to-wing recruitment process, including but not limited to, managing job posting and process compliance, job launch, sourcing and screening of candidates, interview arrangement, candidate tracking and weekly status updates to business partners. Facilitate interview feedback sessions, prepare salary proposal, extend verbal offers and issue Employment Agreements
• Build strong relationships with stakeholders and develop expertise in their business and talent needs to create diverse talent pools and pipelines
• Collaborate with People Leaders and HR to ensure a positive candidate’s experience
• Utilize proactive and innovative sourcing strategies utilizing various techniques to reach out to talents
• Effectively use social media tools in alignment with the company's Brand Strategy
• Partner with local government bodies or institutions for career fairs
• Responsible for weekly reporting of TA metrics

Qualifications/ Requirements:

• Bachelor’s Degree/Diploma with 1- 2 years of recruiting and sourcing experience

Interested candidates may apply through the application system. We regret to inform only Shortlisted candidates will be notified.

EA License No. 01C4394 • RCB No. 200007268E •Derrick Tiew Yong Han EA Registration No. R1877971

By sending us your personal data and curriculum vitae (CV), you are deemed to consent to PERSOLKELLY Singapore Pte Ltd and its affiliates to collect, use and disclose your personal data for the purposes set out in the Privacy Policy available at https://www.persolkelly.com.sg/policies. You acknowledge that you have read, understood, and agree with the Privacy Policy.

Purpose: Responsible for the complete end-to-end planning, direction, and coordination of all the manufacturing processes related to system integration for a specific project. Together with the program team, the Manufacturing Engineer is to ensure that assembly can meet costs, quality, and delivery requirements.

Key Area of Responsibilities:

• Design of production layout to enable production to fulfill build plan forecast or pre-defined production run rate.
• Define requirements for assembly tools and equipment to support product realization and build plan.
• Participate actively in PQP to ensure that risks are identified, and preventive actions defined and implemented.
• Implement a certification program for assembly to ensure that assembly module leads are trained and certified to carry out specific assembly tasks.
• Collaborate with the Process Engineer in the design of the assembly Kit Kart for issue of materials into the clean room and effective handling of materials inside the production area.
• Lead in resolving technical problems faced by Assembly, and resolve internal and customer quality complaints.
• Monitor assembly capacity of the program, and perform ramp assessment when required, to fulfill build plan system delivery.
• Contribute to the system build progress meetings together with the program team to meet on-time delivery targets.
• Evaluate assembly efficiency and implement improvements to achieve the calculated standard time.
• Monitor all customer's consigned equipment to ensure all are inventoried, calibrated, and maintained regularly.
• Identify and implement improvements to shorten production cycle time, improve overall production efficiency, improve quality performance, enhance safety or to boost sustainability.
• Support and participate in company continuous improvement program.

Qualification & Experiences:

• Bachelor in Engineering (Mechanical, Mechatronics, Electrical, Precision or Industrial Engineering)
• At least 3 year of experience as an engineer in the manufacturing assembly environment.
• Strategic, creative, and systemic thinking
• Excellent leadership and effective communicator with all levels of associates and management.

5 days work week , 2 shift rotating by week

7am - 3pm

3pm - 11pm

Job Summary

Lab Executive independently performs advanced level laboratory functions with competence and minimal supervision. Support the Technology Department through all stages of product development and testing.

Reporting: Senior Laboratory Executive

Role and Responsibilities

1. Ensure all Lab Job Ticket assigned are performed accordingly and completed on time.

2. Independently and competently performs assigned tasks in a prioritized, logical, and timely manner in agreement with company laboratory and safety procedures with competence and minimum supervision

3. Tests in accordance with specifications provided.

4. Perform all core function/testing required by this position.

5. Assists in reviewing & writing of SOPs and standard test methods.

6. Enter test data and conditions into the lab system and can assemble into a simple report.

7. Capable of conducting internal R&R.

8. Troubleshoot lab equipment issues with assistance from M&E/ equipment vendor.

9. Prepare testing report

Job Requirements:

• Diploma in Chemical Engineering / Chemical Process Technology

• 3 year of related work experiences.

• Work experience in Manufacturing environment will be preferred

• Good understanding of manufacturing safety and 5S

• To ensure that all operational duties by the team are completed on a daily schedule, ahead of time, efficiently and effectively
• To provide excellent customer service and management and to ensure that all your staff understands the importance of such standards
• Ensure smooth day-to-day operation of the team
• Obtain sales target and KPIs given by the management
• Assist in planning schedule
• Promote positive work environment
• Ensuring compliance with licensing, hygiene and health and safety legislation/guideline
• Develop strategic and operational plans for managing execution and measuring results
• Any other duties as may be assigned by management
• Must Able to work night shift and split shift
• Must Able to work OT on weekends and public holiday
• · Must be able to work night shift and split shift
• · Must be able to work extra hours or weekend if needed

Our client is a precision engineering manufacturer with strong presence in APAC region. Due to business needs, they are now recruiting a Cost Analyst to be part of their FP&A team for ongoing transformation projects. They are located in the North Area - easily accessible.

Responsibility Cost Analyst:

• Analyze product costs, including materials, labor, and overhead, to ensure accurate cost structures.
• Conduct variance analysis and improve cost allocation accuracy using the ERP system.
• Develop and maintain standardized costing methodologies across all sites.
• Collaborate with production, procurement, and sales teams to gather data for cost analysis.
• Support FP&A activities, including budgeting, forecasting, and pricing strategies.
• Prepare cost reports and provide insights to guide decision-making and profitability.
• Identify cost-saving opportunities and improve costing processes.
• Ensure compliance with accounting standards and assist with audits related to product costs.

Requirements:

• Min Degree in Finance / Accountancy or any related field
• Minimum 3 - 5 years analysis experience in product costing from manufacturing or similar setting

Interested candidates who wish to apply for the advertised position, please click APPLY NOW or email an updated copy of your resume/cv.

We regret that only shortlisted candidate will be notified.

Email Address: [email protected]

Recruitpedia Pte. Ltd.

EA License No. 19C9682

EA Reg. No. R2198636 (Oh Puey Xin)

Job Description

We are looking for a detail-oriented and results-driven Manufacturing/Lifecycle Engineer to oversee the transition of validated hardware designs into mass production and address post-production challenges. The ideal candidate will work closely with manufacturing, supply chain, and support teams to ensure smooth production processes, maintain product quality, and resolve any field issues related to the product.

This role is critical to bridging the gap between design engineering and manufacturing, ensuring that products are delivered to customers with the highest standards of quality and reliability.

Responsibilities:

• Manufacturing Readiness:

· Coordinate with manufacturing teams to set up production lines for new products.

· Develop and implement manufacturing processes, test protocols, and quality standards.

· Review design documentation and BOMs (Bill of Materials) to ensure manufacturability and cost efficiency.

· Work with procurement to source components and ensure compliance with specifications.

• Production Support:

· Address and resolve issues that arise during manufacturing, such as process deviations or component availability.

· Monitor and analyse production metrics to identify areas for process improvement.

· Assist in scaling production from prototypes to high-volume manufacturing.

• Post-Production Support:

· Investigate and resolve field failures, including root cause analysis and corrective actions.

· Develop repair and rework processes for defective units.

· Provide engineering support to the customer service team for hardware-related issues.

• Quality Assurance:

· Collaborate with the quality team to establish and maintain product quality standards.

· Conduct hardware audits and inspections to ensure compliance with specifications.

· Implement changes to improve product reliability and longevity based on field data.

• Documentation and Training:

· Create and maintain documentation for manufacturing processes, test procedures, and troubleshooting guides.

· Train production and support teams on hardware assembly, testing, and maintenance.

Qualifications:

· Bachelor’s degree in Electrical Engineering, Electronics Engineering, or a related field.

· Experience in hardware manufacturing, production, or support engineering.

· Strong understanding of manufacturing processes, including SMT, PCB assembly, and testing.

· Familiarity with tools like failure analysis equipment, oscilloscopes, and multimeters.

· Experience with quality standards and certifications (e.g., ISO 9001).

· Strong problem-solving and analytical skills.

· Excellent organizational and project management abilities.

· Ability to work under pressure and meet production timelines.

Preferred Qualifications:

· Experience with hardware troubleshooting and root cause analysis in a production or field environment.

· Knowledge of ERP systems and production planning tools.

· Familiarity with regulatory compliance standards (e.g., CE, FCC, RoHS).

· Experience working with contract manufacturers and suppliers.

Production Supervisor Responsibilities:

• Hire and train employees.
• Maintain the production schedule.
• Evaluate production efficiency.
• Determine the quality of goods before shipping.
• Ensure that health and safety laws are followed.

Production Supervisor Requirements:

• A degree in mechanical engineering or related field.
• 4 years' of manufacturing experience.
• Excellent interpersonal and communication skills.
• Excellent time management skills.
• Ability to multitask.
• Knowledge of health and safety regulations.

• Well Established Company

• Working location at Woodlands, Senoko

• Working hour: Monday - Friday (8am – 5.30pm) & Saturday (8am – 12pm)

• Variable Bonus + Excellent Welfare & Benefits

Job Scope

• Provide technical/ IT Support.
• System Hardware Integration.
• Liaise with client for the project.
• Access Control/ FR Installation & Configuration.
• Service Team Support.
• API Integrate for device.

Requirement

• Diploma / Degree in Computer Science and Technologies or equivalent.
• 1 - 3 years of relevant working experience

Candidates are encouraged to apply this position via Apply Now button with the following information in the resume:

• Work experiences and job responsibilities
• Current and Expected salary
• Reason for leaving
• Date of availability
• Education background

We regret that only shortlisted candidates will be contacted.

SIM BEI NA (R22111637)

EA Recruitment Pte Ltd

EA License No: 21C0492

Our client is a Manufacturing MNC, one of the leading players in the Oil & Gas servicing sector. Due to their current expansion plan, they are looking for a Quotation Engineer to join their team, in hopes of developing the current high performing team. They are located in the West.

Job Responsibilities

• Review and comprehend technical requirements outlined in customer tender documents.
• Coordinate with internal teams to collect essential data for proposal development.
• Provide technical expertise during tendering and quotation processes/activities and support the sales and marketing team with relevant engineering insights.
• Prepare cost breakdowns and delivery schedules to assist the sales and proposals team in responding to inquiries.
• Handle tendering processes and engage with clients from oil companies through various communication channels such as meetings, phone calls, and written form tendering clarification.
• Draft and compile technical documentation, such as datasheets, proposal designs, clarification notes, and responses to tender specifications.
• All other ad-hoc duties as assigned.

Requirements

• Min Degree in Relevant Qualification in Engineering or equivalent.
• Min 5 years relevant working experience in tendering and quotation process.
• Proficient in Microsoft Office, SharePoint, and CAD software.

Interested candidates who wish to apply for the advertised position, please click APPLY NOW or email an updated copy of your resume/cv.

We regret that only shortlisted candidate will be notified.

Email: [email protected]

Recruitpedia Pte. Ltd.

EA License No. 19C9682

EA Reg. No. R23115553 (Lai Hor Yan)