• To supervise the work of sub-contractors and work closely with other operations staff to meet the project schedule
• Report to the Construction Manager
• You will adhere to construction procedures and safe work practices and ensure that works are executed within an acceptable standard of workmanship so as to meet the stringent requirement conducted during site tests and inspections
• Prepared and Assembled ready wooden cabinetry to drawings and specifications for installation.
• Verified dimensions and checked the quality and fit of pieces.
• Measured and marked dimensions of sites.
• Performed Cabinet assembly with the use of hand tools.
• Assisted with all aspects of the assembly team.
• Read detailed schematics for cabinets and executed assembly accurately.
• Helped with delivering and manually installing cabinets.
• Installed cabinets in residential homes.
• Minimum 3 years of relevant experience in the Construction Industry
• Possess a certificate in Building Construction Safety Supervisor (BCSS)
• Supervisory experience in foundation & structural works on site
• Able to work independently with a positive attitude

Responsibilities:

• Assists in preparing Work Plan and manpower requirements based on the Work scope / Specification
• Delegates job to supervisors and plan manpower required for jobs in accordance to the budgeted man-hours
• Coordinates between the different trades and resolves problems encountered in project
• Reads and interpret Piping ISOMETRIC Drawing /P&ID Drawings
• Prepares Material Take-Off (MTO) based on Piping ISOMETRIC Drawing /P&ID Drawings
• Utilizes different pipe welding materials
• Raises and approve Purchase Request for materials and equipment required for the jobs accordingly
• Monitors work of sub-contractors to ensure that quality and workmanship conform to company standards
• Ensures all standard operating procedures comply with specifications, quality standards, statutory and regulatory requirements

Requirements:

• Bachelor’s degree in Engineering/ Marine Engineering or related engineering disciplines
• Minimum 2 years of relevant working experience in piping discipline
• Able to multi-task and able to work in a fast-paced environment
• Must be able to board ships, enter confined spaces with limited visibility and have the ability to climb up and down stairs and/or ladders of varying heights.
• Occasional short-term overseas visit or inspections as per project requirements
• Good in planning, analyzing, communicating and independent work
• Excellent proficiency in English (written and spoken)

Job Description & Requirements

1. Formulate and provide directives for Production Department in meeting organization's goals and committed to Quality Management System.
2. Accountable with the assigned factory sections in terms of production, New Model Development, Customer Service and Support, Supplier and Materials Management, Logistics and Transportation.
3. Analyze section profit/loss of projects and providing cost control and cost effectiveness strategy.
4. Provide production & material planning in ensuring production efficiency and on time delivery.
5. Ensure effective control of machine up/down time and well scheduled and optimized planning in machine / work-center load.
6. Manpower balancing and deplaoyment strategy with manpower skill set.
7. Continuous improvement program to ensure productivity, cost and quality effectiveness, general housekeeping and safety.
8. Formulate, identify and conduct management / training workshop to initiate / facilitate staff in aligning organizations missions and objectives and actions plans.
9. Support other function activities within the company to achieve the overall business goals and objectives.
10. Implement process improvement.
11. Authorize the appropriate use of performance monitoring and statistical techniques.
12. Ensure and coordinate the implementation of risk assessment and risk contol of medical devices.

Requirements:

• Preferred to have Diploma / Degree in Mechanical / Precision Engineering or equivalent.
• Minimum 6 years in a Manufacturing environment (preferably in Precision Engrg / Sheet metal industry) and with at least 4 years of supervisory capacity.
• Exposure with involvement in newly factory, product / process set-up is much preferred.
• In-depth understanding of manufacturing cycle and good budgeting control.
• Strong leadership with good analytical and problem solving skill, as well as dynamic in planning and result oriented.

• Experience in application support role for min 5 years for support and good knowledge of Java, Unix/Linux, SQL
• Recent experience in working with Java J2EE applications
• Experience in Unix commands , SQL queries
• Experience in programming languages such as JAVA/J2EE.
• Knowledge of web applications, batch jobs, JBOSS, MariaDB, SQL, Shell
• Knowledge of Job scheduling, MQ setup
• Dynamic individual with thirst to learn
• Strong team player with excellent inter-personal skills & ability to meet SLAs

Our client is a Manufacturing MNC. Due to business needs, they are now recruiting a Sales Coordinator to be part of their Sales Team for ongoing transformation projects. They are located in the West - easily accessible.

Duties of Sales Coordinator:

• Accurately process sales orders in the system, ensuring correct product details, pricing, and customer information.
• Prepare and maintain sales documents, including quotations, invoices, contracts, and sales reports.
• Assist the sales team in preparing presentations, proposals, and any other necessary documents.

Requirements:

• Relevant experience
• Experience with SAP or ERP System

Interested candidates who wish to apply for the advertised position, please click APPLY NOW or email an updated copy of your resume/cv.

We regret that only shortlisted candidate will be notified.

• Email Address: [email protected]
• EA License No: 19C9682
• EA Personnel No: R2199158
• EA Personnel Name: Soo Wei De

WhatsApp: +65 90820021 (Kyler)

Email: [email protected]

• Working Days: Monday – Friday
• Working Hours: 08:00am - 05 :00pm
• Location: Taman Jurong
• Salary: $2,700 - $3,000 + $90 Transport Allowance

Responsibilities

• Brand promo activities/packaging artworks editing, managing advertising and promotion
• Support as in house designer for urgent packaging editing/new POSMs creation etc
• Website maintenance/editing (ensuring website information is up to date)
• To support in development and planning of new products with the mission of taking a product from concept to commercialization
• To support ad hoc marketing activities whenever possible.

Requirements

• Relevant Experience in the same capacity
• Knowledge on using illustrator/photoshops for design of artworks/POSMs/editing package
• Social media knowledge/experience will be added advantage

The Supreme HR Advisory Pte. Ltd | 14C7279

Gan Kai Le | R23112683

Responsibilities:

• Monitor processes to reduce costs by utilization of manpower, equipment, facilities, materials.
• Drive improvement on best practices with emphasis on productivity & product quality.
• Ensure all manufacturing processes are adhering to all Regulatory and Statutory Requirement.
• Work with HR to address employee grievances are addressed in a timely fashion.
• Review, evaluate & train employee performance to determine competency & knowledge.
• Improve work safety and practices and maintain housekeeping in all areas.
• Submission of overtime record to HR Dept for computation of monthly salary.
• Prepare process documentation such as work instruction, process specifications and quality plan.
• Prepares reports, analyzes data, and makes recommendations for improving plant operations.
• Trained and participate in maintenance program to achieve in a safe, timely, and cost-effective manner.
• Communicate with internal teams to resolve production and maintenance issues.
• Assist in hiring of production personnel.
• Maintain and update operating manuals for all the manufacturing equipment and facilities.
• Maintain and update operating training manuals for all manufacturing processes.
• Perform any other ad-hoc projects or tasks

Requirements:

• Diploma/Degree in Manufacturing/Electrical /Mechanical / Engineering discipline.
• Minimum 5 years working experience in manufacturing environment.
• Able to supervise and lead the subordinates.
• Knowledge in ISO is an advantage.

Interested applicants, send in your updated resume by clicking “Apply Now”

Michelle Koh

EA License No.: 23C1894

EA Personnel No.: R1656105

Primary

1. To Provide primarily support at production department.
2. Assist superiors in prepare and compile reports.
3. Prepare, generate and release job order / purchase requisition to various departments of the confirmed job orders.
4. Responsible for planning of production output, monitor machine capacity, OEE etc.
5. Work closely among inter-departments to ensure committed schedules are met.
6. Provide regular update to the sales/Projects team on project development in a timely manner.
7. Maintenance and upkeep records of Production/Engineering/Technical documents.
8. Arrange production run according to Supervisor/HOD instruction.
9. Receiving/distribution of raw material for production usage.
10. Parts distribution to other departments for next process.
11. Able to systemize and improve on workflow.
12. Good application and know-know on the ERP / reporting tools.
13. Ability to understand or interpret all technical drawing and part specification.

Education level:

1. Min. NTC/Nitec level ME/Mechatronic or its relevant.

Experience level:

1. Two (2) years in relevant experience in clerical environment or manufacturing or its relevant

2. Perform competent in clerical duties, computer literacy.

3. Result oriented, resourceful and independent.

4. Ability to read, understand mechanical drawing and Geometric Dimensioning and Tolerance.

In this role, you are required to support the daily operations of the production section you are assigned to. You will be required to maintain the production area cleanliness and comply with food hygiene management standards.

Job Description

• Prepare and process of food items (Halal).
• Prepare items according to in-house procedures.
• Follow food production and preparation specifications.
• Preparing food ingredients by measuring, mixing, stirring, chopping, slicing, dicing, peeling, or otherwise preparing them for use in meal preparation.
• Ensure proper and safe operation of machineries.
• Maintain & ensure the cleanliness of work area.
• Check and ensure that quality and quantity of items ordered are received and stored in proper condition.
• Keep track of inventory to ensure adequate food ingredients, packaging supplies and finished product.
• Perform other ad-hoc duties as requested.

Requirements:

• Physically fit
• Able to work as a team.
• No Experience may apply.

• To supervise the work of sub-contractors and work closely with other operations staff to meet the project schedule
• Report to the Construction Manager
• You will adhere to construction procedures and safe work practices and ensure that works are executed within an acceptable standard of workmanship so as to meet the stringent requirement conducted during site tests and inspections
• Prepared and Assembled ready wooden cabinetry to drawings and specifications for installation.
• Verified dimensions and checked the quality and fit of pieces.
• Measured and marked dimensions of sites.
• Performed Cabinet assembly with the use of hand tools.
• Assisted with all aspects of the assembly team.
• Read detailed schematics for cabinets and executed assembly accurately.
• Helped with delivering and manually installing cabinets.
• Installed cabinets in residential homes.
• Minimum 3 years of relevant experience in the Construction Industry
• Possess a certificate in Building Construction Safety Supervisor (BCSS)
• Supervisory experience in foundation & structural works on site
• Able to work independently with a positive attitude

• can work on publick holidays
• can work on shifts/change of shifts
• can work and stand for long hours
• at least 10 years experiences
• have relavant certificates/diploma
• hardworking and keen
• 
  
• Provide overall supervision of production activities.
• Plan, organize and lead a team of production workers to achieve production target and output, cycle time, and yield.
• Improvement in maintaining product quality and productivity. Provide a guideline to check on processes thereby assuring that work is done by the operators.
• Monitor the daily efficiency status of the line.
• Ensure good housekeeping and safety at the workplace.
• Oversee hiring and training of food production personnel
• Perform other duties as assigned.

Job Description & Requirements

1. Formulate and provide directives for Production Department in meeting organization's goals and committed to Quality Management System.
2. Accountable with the assigned factory sections in terms of production, New Model Development, Customer Service and Support, Supplier and Materials Management, Logistics and Transportation.
3. Analyze section profit/loss of projects and providing cost control and cost effectiveness strategy.
4. Provide production & material planning in ensuring production efficiency and on time delivery.
5. Ensure effective control of machine up/down time and well scheduled and optimized planning in machine / work-center load.
6. Manpower balancing and deplaoyment strategy with manpower skill set.
7. Continuous improvement program to ensure productivity, cost and quality effectiveness, general housekeeping and safety.
8. Formulate, identify and conduct management / training workshop to initiate / facilitate staff in aligning organizations missions and objectives and actions plans.
9. Support other function activities within the company to achieve the overall business goals and objectives.
10. Implement process improvement.
11. Authorize the appropriate use of performance monitoring and statistical techniques.
12. Ensure and coordinate the implementation of risk assessment and risk contol of medical devices.

Requirements:

• Preferred to have Diploma / Degree in Mechanical / Precision Engineering or equivalent.
• Minimum 6 years in a Manufacturing environment (preferably in Precision Engrg / Sheet metal industry) and with at least 4 years of supervisory capacity.
• Exposure with involvement in newly factory, product / process set-up is much preferred.
• In-depth understanding of manufacturing cycle and good budgeting control.
• Strong leadership with good analytical and problem solving skill, as well as dynamic in planning and result oriented.

Our client is a global manufacturer. Due to business needs, they are now recruiting a FP&A Accountant to be part of their FP&A team for ongoing transformation projects. They are located in the North Area - easily accessible.

Responsibility:

• Coordinate the preparation, compilation, and analysis of the Annual Budget prior to its submission to the corporate office.
• Analyze financial variances and take a proactive approach by conducting meetings with operations departments to review and discuss monthly forecast performance.
• Synthesize complex data from various sources and transform it into comprehensive management reports.
• Scrutinize a wide range of records and engage with various departments to ensure data accuracy and reliability.
• Oversee SOX compliance and address internal and external audit queries.
• Enhance processes and actively participate in ad-hoc LEAN projects.

Requirements:

• Min Degree in Finance / Accountancy or any related field
• Minimum 5 years experience in FP&A and SOX
• Experience in manufacturing industry is a bonus

Interested candidates who wish to apply for the advertised position, please click APPLY NOW or email an updated copy of your resume/cv.

We regret that only shortlisted candidate will be notified.

Email Address: [email protected]

Recruitpedia Pte. Ltd.

EA License No. 19C9682

EA Reg. No. R2198636 (Oh Puey Xin)

Job Description:

• Technical transfer product/project in assembly and testing, and from customers
• Provide technical support in manufacturing and testing in product build
• Provide technical support to QC in RMA issue
• Provide technical support to QA in Compliance, Regulatory, Customer & Audit

Job Requirements:

• Minimum Diploma in Electronics Engineering
• At least 2 years of relevant work experience in Electronics Manufacturing industry
• Technical competent to handle product/project manufacturing, transfers and troubleshooting Experience in product/project, manufacturing and testing
• Able to liaise with customers on technical matters
• Experience in manufacturing environment with ISO13485 & FDA will be advantageous
• Good communication and problem-solving skills
• Medical product experience and Quality Management System exposure preferred

*Please be notified that only shortlisted candidates will be notified*

By submtting your personal data and/or resume, you give consent to the collection, use, and disclosure of your personal data and/or resume by the company (or its agent) for the purpose of the processing and administration by the company relating to this job application.

EA Personnel Name: Chan Jun Wei

EA Personnel No: R1543992

EA License No: 21C0845

Our client is a Manufacturing MNC, one of the leading players in the Oil & Gas servicing sector. Due to their current expansion plan, they are looking for a Quotation Engineer to join their team, in hopes of developing the current high performing team. They are located in the West.

Job Responsibilities

• Review and comprehend technical requirements outlined in customer tender documents.
• Coordinate with internal teams to collect essential data for proposal development.
• Provide technical expertise during tendering and quotation processes/activities and support the sales and marketing team with relevant engineering insights.
• Prepare cost breakdowns and delivery schedules to assist the sales and proposals team in responding to inquiries.
• Draft and compile technical documentation, such as datasheets, proposal designs, clarification notes, and responses to tender specifications.
• All other ad-hoc duties as assigned.

Requirements

• Min Degree in Relevant Qualification in Engineering or equivalent.
• Min 5 years relevant working experience.
• Proficient in Microsoft Office and CAD software.

Interested candidates who wish to apply for the advertised position, please click APPLY NOW or email an updated copy of your resume/cv.

We regret that only shortlisted candidate will be notified.

Email: [email protected]

Recruitpedia Pte. Ltd.

EA License No. 19C9682

EA Reg. No. R23115553 (Lai Hor Yan)

Job Description:

• Develop new business opportunities & sales leads for revenue growth and customer retention.
• Achieve sales targets and analyst current market trends and industry information.
• Pitch, recommend and fulfil the requirement of customer in terms of products and services offered
• Work closely with the production, application and shipping team to ensure timely delivery and that all order requirements are met.
• Attend problem and generate solution

Job Requirements:

• Minimum Diploma in Mechanical Engineering or equivalent.
• Strong drive and initiative with ability to work independently
• With relevant sales experience in Precision Engineering related Products.
• Proven sales and customer care track record.
• Strong technical knowledge in CNC machining and CMM basic inspection.
• Good presentation and communication skill.

*Please be notified that only shortlisted candidates will be notified*

By submtting your personal data and/or resume, you give consent to the collection, use, and disclosure of your personal data and/or resume by the company (or its agent) for the purpose of the processing and administration by the company relating to this job application.

EA Personnel Name: Chan Jun Wei

EA Personnel No: R1543992

EA License No: 21C0845

Job Title
Driver - 10 PM to 10 AM (Night Shift Driver)

Occupation
Driver

Job Description & Requirements
We seek a responsible individual to join us as a Class 3 Delivery Driver.

(Roasted Meat Manufacturer at Bedok Industrial Area)

Working Hours

• Shift: 10 PM to 10 AM (Night Shift-working time will be adjust based on order)
• Days: 6 days per week

Main Duties

• Meat packaging tasks
• Perform assigned deliveries
• Communicate with customers and collect payments
• Undertake other tasks as assigned

Requirements

• Must possess a valid Singapore Class 3 driving license
• Ability to speak both English and Chinese
• Clean driving record for the past two years
• Willingness to work on public holidays and weekends
• Comfortable handling non-halal products (e.g., pork)
• Comfortable working in an oily environment

Employment Benefits

• Annual leave: 7 days and above
• One meal is provided per shift
• Performance bonus
• Free medical visits (capped) at partnered clinics

Remarks
A company vehicle is not allowed to be driven home.

Our client is a Global Manufacturing MNC, one of the leading players in the Oil & Gas servicing sector. Due to their current expansion plan, they are looking for a Quality Assurance Engineer to join their team, in hopes of developing the current high performing team. They are located in the West.

Job Responsibilities

• Responsible for the creating and executing methods and procedures for the inspection, testing, and evaluation of the products and production equipment.
• Responsible for the designing and evaluating processes, mechanisms, and equipment used in inspection and testing.
• Responsible for quality assurance tests and statistical analyses to assess control levels and manage risks related to product quality
• Responsible for root cause analyses of incidents that necessitate corrective actions.
• Ensuring that corrective measures and deviations meet with the standards
• Ensuring that documentation is compliance with the Experienced Professional

Requirements

• Min Diploma in engineering or equivalent
• Min 3 years’ relevant working experience in Quality Management
• Certified in API Q1, Q2, ISO and other relevant auditor would be advantages.

Interested candidates who wish to apply for the advertised position, please click APPLY NOW or email an updated copy of your resume/cv.

We regret that only shortlisted candidate will be notified.

Recruitpedia Pte. Ltd.

EA License No. 19C9682

EA Reg. No. R23115553 (Lai Hor Yan)

[Order Number: 671284-R]

Responsibilities

• Assist customer engineers in improving machine performance and processes.
• Develop and adjust process methods, equipment setups, and production techniques.
• Work with teams to troubleshoot issues, enhance processes, and implement automation solutions.

Requirements

No experience candidates are welcome to apply.

• Must be comfortable working in a cleanroom environment.

We regret that only shortlisted candidates will be notified. However, rest assured that all applications will be updated to our resume bank for future opportunities.

Please kindly refer to the Privacy Policy of Good Job Creations for your reference:
https://goodjobcreations.com.sg/en/privacy-policy/

EA Personnel Name: Tan Sin Rou
EA Personnel Registration Number: R22106434
EA License no.: 07C5771

[Order Number: 782382-R]

Responsibilities

• Manage the delivery, installation, and setup of bag-making machines at client sites, ensuring proper functionality and adherence to company standards.
• Conduct client training sessions on equipment operation, maintenance, and troubleshooting.
• Provide ongoing support by addressing inquiries, offering effective solutions, and performing routine maintenance to ensure long-term machine performance.
• Collaborate with the technical team in Japan to resolve complex technical issues and relay customer feedback for product improvement.

Requirements

• Non-experienced candidates are welcome to apply.
• Willingness to travel internationally as part of the job.
• Hands-on experience with industrial machinery is a plus.

We regret that only shortlisted candidates will be notified. However, rest assured that all applications will be updated to our resume bank for future opportunities.

Please kindly refer to the Privacy Policy of Good Job Creations for your reference:
https://goodjobcreations.com.sg/en/privacy-policy/

EA Personnel Name: Tan Sin Rou
EA Personnel Registration Number: R22106434
EA License no.: 07C5771

Job Title: Production Technician – Kallang / 5 Days / Gross Up to $3,000 / AWS & VB