Chemical Technician (Manufacturing/ Pharma/ GMP)

12 Months Contract

Location: Tuas

Up to $2,000 + Shift Allowance

Industry: Pharmaceutical

Our client aims at creating a new manufacturing concept consisting of a new generation of evolutive multi-product facilities, modular, adaptable, and agile, leveraging new disruptive technologies, to better address vaccine business challenges.

Job Purpose

• Operate and monitor the chemical production activities in the plant, ensuring that the product is manufactured within set production schedule and to the required standards of quality in a safe, efficient, responsible and cost-effective manner.

Responsibilities:

• Operate the different streams of the plant for their specific processes.
• Each of these processes comprises the following activities.

1. Handover checks computerised and/or manual.
2. Obtaining, following and completing process related documentation.
3. Pre and post batch cleaning of vessels and lines.
4. Pre batch checks.
5. Charging vessels either manually or via a pump.
6. Post charging checks and taking corrective action where necessary.
7. Adjusting and monitoring process conditions as required to start the process.
8. Monitoring process; both with computer and manually observing temperature, pressure, flow, pH, volume, colour, moisture content and adjusting the parameters accordingly.
9. Carrying out routine sampling and Bulk packing and testing of samples as required.
10. Recognise end point of the reaction and altering process parameter to stop reaction.
11. Transferring product to the next stage.

• Comply with HSE and quality policies and defined procedures. Bring out unsafe conditions and acts / procedures for correction.
• Record all operational and analytical data on the appropriate documents and inform the Shift Supervisor of any process abnormalities.
• Maintain product separation and accurate labelling of all documents, bags and vessels at all times.
• Carry out routine checks and scheduled cleaning procedures including cleanrooms.
• Request and collect raw materials and consumables, observe clean areas procedures, monitor raw materials stock and notify Shift Supervisor for any abnormalities.
• Notify Shift Supervisor of requirements for maintenance. Prepare equipment before maintenance work e.g. depressurizing, cleaning of lines and equipment, de-energizing, LOTO etc.
• Perform basic maintenance of equipment using tools such as TPM.
• At the Shift Supervisor's request, to carry out on-the-job training of other Chemical Technicians, incorporating cGMP and safety procedures.
• To observe cGMP and Health & Safety rules and regulations at work at all times in accordance with Company set standards.
• To be aware of the potentially hazardous nature of the chemicals in the area and must take the appropriate precautions when using them.
• Maintain housekeeping of the plant, daily API cleanrooms cleanings and provide suggestions for improvements.
• To operate ancillary facilities e.g. water system, tank farms, solvent recovery, salt crushing activities etc.

Requirements:

• Minimum NITEC or Higher NITEC in Chemical Processing or related
• Be prepared to work 12-hour shifts and overtime.
• Able to perform manual handling tasks including lifting of materials which are weights up to 25kg.
• Medically fit, and to be part of Company’s firefighter CERT team.
• Able to use process control systems for operation of plant equipment
• Familiar with operation of manufacturing equipment such reactors, centrifuges, filters, dryers etc
• Familiar and able to apply GMP in manufacturing processes
• Able to identify and manage hazards that may occur within biopharmaceutical plant

Lim Pey Chyi - [email protected]

Recruitment Consultant (R2090579)

Manpower Staffing Services (S) Pte Ltd

EA Licence: 02C3423

about the company

My client is a leading consumer electronics manufacturing with an outstanding international reputation in its field and a great emphasis on training & development. With more than 20 years history, this is a great brand to join at an exicting time in their development.

about the job

• Responsible for the day to day equipment maintenance
• Participate in lean and continuous improvement assignment
• Compile monthly production report( Output, Machine UPH and Yield)
• Production planning and allocation of manpower to meet delivery schedule
• Uphold housekeeping standards for employees
• Actively drive/lead continuous improvement activities to improve yield
• Manage equipment servicing contracts with suppliers.
• Ensure that all equipments are operating at optimum UPH and speed

skills & experience required

• Degree / Diploma in mechanical / mechatronics engineering / manufacturing
• Min 5 years of equipment maintenance experience
• Possess good analytical, troubleshooting, and problem-solving skills
• Willing to work in western part of Singapore (Tuas / Pioneer / Boon Lay)

If you are interested in the position , kindly send your CVs in to yitwei.kwan(@)randstad.com.sg

Please include your availability, expected salary and reason for leaving current job.

We regret that only shortlisted candidates will be contacted

EA: 94C3609 / Reg: R1325913

Our client are seeking a highly motivated and detail-oriented Financial Analyst . The ideal candidate will have strong analytical skills, advanced Excel proficiency, and a passion for data-driven decision-making.

Details:

• Salary range from $5,000 to $6,500, with AWS an Variable Bonus
• US MNC
• Report to FP&A Director in US

Responsibilities

• Combine and transform data from various sources to prepare for analysis, ensuring accuracy and completeness.
• Identify and resolve data discrepancies and establish data quality protocols.
• Conduct data analysis and summarize findings in clear and concise reports to support monthly and quarterly business metrics.
• Create visually compelling charts and graphs to present insights using Excel and PowerPoint.
• Collaborate with cross-functional teams, including Accounting and General Managers, to understand data requirements and provide actionable insights.

Requirements

• Bachelor’s degree in Finance, Business, Economics, or Data Science.
• 2 years of experience in a financial or operations analyst role, with manufacturing analytics experience preferred.
• Strong understanding of P&L analysis and advanced MS Excel skills (vLookups, Indexing, Pivot Tables, etc.).
• Exceptional analytical and problem-solving abilities.
• Excellent verbal and written communication skills.
• Detail-oriented, capable of managing multiple priorities in a fast-paced environment.
• Positive attitude, team player, and a strong desire for continuous learning.
• Proficiency in Power BI, age X3, APIs, or other financial software tools is added advantaegs.
• Ability to work independently and manage multiple projects efficiently.

Interested candidates please apply online or send your latest CV to [email protected]

AlwaysHired Pte Ltd

Reg No: R1549345

EA: 24C2293

We regret to inform that only shortlisted candidates will be notified. Please note that your response to this advertisement will constitute informed consent to the collection, use, and/or disclosure of personal data by AlwaysHired, its affiliates and, where necessary, to relevant third parties, for purposes such as job application processing, career advisory, research, and other administrative purposes, in compliance with the relevant provisions of the Privacy Policy available at www.alwayshired.com.sg/privacy-policy.

Position: Business Development Executive (F&B Industry)

• Working days: 5.5 days work week
• Working hours: 8.30am - 5.30pm
• Salary: $3000 to $4000 + Car Allowance $1200
• Location: Senoko S Rd, Singapore (Woodlands)

Requirements

• Possesed Diploma in Business Administration or equivalent
• At least 1-3 years of relevant Business Development / Sales experience in F&B industry (Preferred in Food Service Channels)
• Driving license with own Transport is a must to perform customer visits

Key Responsibilities

• Responsible for developing new prospects and maintaining existing accounts in the Food Service/ HORECA channels.
• Identify leads and develop strong business relationship with customers
• Maintaining of good rapport with existing customers
• Responsible for driving growth and achievement of monthly sales target
• Managing customer’s account receivables to ensure timely and prompt payment
• Monitor current trends in the industry with competitors and market activities

Chin Wai Loon Reg No: R24121618

The Supreme Hr Advisory Pte Ltd EA No: 14C7279

Job Description:

• Prepare workstations at the start of processing & clean and reinstate workstations after processing.
• Handle frozen/chilled fish/seafood processing by types of equipment with various components including processing (cutting, trimming, deboning & deskinning etc), packing (vacuum packing & strapping etc ) and storing of products.
• Cleaning and maintaining tools and equipment.
• Ensure that all food hygiene and safety standards are met and keep up to date with industry standards.
• Perform other food manufacturing duties assigned by the supervisor, as needed.

Requirement:

• Able to work in a cold environment, comfortable with repetitive work activities, working in accordance with schedules, operating machinery and working with cold materials.
• Training will be provided to applicants with little to no experience in operating processing types of equipment.
• Ability to stand or walk for extended periods and lift heavy items.
• Responsible, punctual, good working attitude, good team player and able to work in a fast-paced environment with minimal supervision.
• Applicants with WSQ certification in basic food hygiene, and familiar with food handling and handling process in fish have added advantages.
• Applicants must be willing to work OT duties, including weekends and public holidays, when required due to the nature of the job.

Job Highlights

• Job Types: Permanent, Part-time.
• Working Hours: Mon to Fri 7.45 am to 4.45 pm, Sat 7.45 am to 11.45 am. (5.5 days)
• Great learning development opportunities.
• Work-Life Balance and positive/friendly working environment.

(Only shortlisted candidates will be notified)

Position Overview:

We are looking for a proactive and dynamic Application Support Analyst to join our team. The ideal candidate will have at least 2 year of experience in application support, a strong understanding of Unix commands, Shell scripting, and SQL queries. You will be responsible for monitoring alerts, addressing incident tickets, and ensuring production systems run smoothly.

Responsibilities:

• Monitor application and infrastructure alerts to ensure smooth operation.
• Recommend and implement solutions to prevent and resolve production issues.
• Take ownership of incident tickets, ensuring timely responses and resolutions.
• Close open incident tickets in accordance with service level agreements (SLAs).

Requirements:

• Minimum 2 year of experience in an application support role.
• Proficiency in Unix commands, Shell scripting, and SQL queries.
• Knowledge of Job scheduling, Kafka, and ActiveMQ is a plus.
• Exposure to the banking industry is advantageous.
• Strong team player with excellent interpersonal and communication skills.
• Ownership-oriented with a commitment to meeting SLAs and delivering high-quality work.
• A dynamic individual with a strong desire to learn and grow.

• Working day: 5 days, rotating shift
• Location: Tuas
• Allowance: Night shift, Meal, Transport
• Benefit: Bonus, Annual Leave, Annual Salary Increment, Medical Claim etc.

Job Scope:

• Perform basic coating and cleaning tasks.
• Assist machinists in the assembly process.
• Clean and pack finished goods.
• Perform VM scanning for assigned job numbers.
• Carry out tasks according to assigned work instructions.
• Handle any additional tasks assigned by the manager or supervisor.
• Maintain a clean and safe working environment, adhering to 5S principles.

Requirements:

• Training is provided
• Wiling to do overtime and rotating shift

Aurora Asia Pacific (21C0671)|Ying Kee (R21103783)

Looking for Production/ Site workers.

At least a SPM holder.

Willing to work hard.

Able to commit Saturdays.

Preferable have experience working in factory/ site

Do metal/ factory/ site work.

ATTRACTIVE SALARY + GUARANTEE BONUS *

Please contact / whatsapp HR +65 84828628 ONLY. Thanks.

1. JOB DESCRIPTION

Job Title

Assistant Production Engineer

Job Description & Requirements

Overview

As an Production Engineer (Senior / Assistant), you will assist the Production Manager in managing the Overall Operation of Precast Cconstruction Plant. You are to adhere to Quality, Environmental, Safety Management System in accordance with Company’s standards and customers’ requirements.

Responsibilities

1) Identifies operational problems by observing and studying system functioning and performance results; investigating complaints and suggestions; interviewing process supervisors and operators; completing troubleshooting procedures.

2) Identifies operational priorities by assessing operational objectives; determining project objectives, such as, efficiency, cost savings, energy conservation, operator convenience, safety, environmental quality; estimating relevance, time, and costs.

3) Develops operational solutions by defining, studying, estimating, and screening alternative solutions; calculating economics; determining impact on total system.

4) Anticipates operational problems by studying operating targets, modes of operation, limitations & performance.

5) Improves operational quality results by studying, evaluating, and recommending process re-design; implementing changes; contributing information and opinion to improve productivity performance.

6) Provides operational management information by collecting, analyzing, and summarizing operating and engineering data and trends.

7) Maintains safe and healthy work environment by following and enforcing standards and procedures; complying with legal regulations.

8) Participate in reviewing Company Quality, Environmental, Safety and Health Risk Assessment to ensure its effectiveness.

9) Participate in investigation of EHS incident and recommend preventive measure.

10) Authorize to stop production relating to Safety, Environmental or Efficiency issue not complying to Company Quality, Environmental, Safety and Health Management System or Procedure.

11) Verify that solutions agreed for problems relating to non-conformities relating to product process and Company Quality, Environmental, Safety and Healthsystem are implemented.

12) Review and recommend the disposition of the rejected in-coming raw material, work-in-process and finished goods.

13) Review and endorse Company Quality, Environmental, Safety and Health System Procedure.

14) Manage, coach and train the team members which include carrying out performance review and disciplinary action, if required.

15) Perform any other duties as assigned by the Management and the designated manager.

Requirements

1) Minimum ITE

a) Preferably in Fabrication / Civil Engineering

b) 5 years’ experience working as Engineer or 8 years’ as Technician in a manufacturing environment

2) Diploma in Engineering

a) Preferably in Fabrication / Civil Engineering

b) 2 years’ experience working as Engineer in a manufacturing environment

3) Preferably with knowledge of manufacturing and assembling of Precasting.

4) Knowledge of ISO 9001, 14001 & 45001 standards and AutoCAD will be advantages.

5) Knowledge in Safety Management is a must.

6) IT savvy with proficient in Microsoft Office application.

7) Possess leadership and supervisory skills with manpower planning experiences.

8) Possess problem-solving, analyzing and reporting skills.

9) Possess good interpersonal skills and excellent team spirit.

10) Independent with high level of initiative and fast learner.

11) Meticulous and positive attitude in learning.

Company Overview:

Qi Tian is a leading provider of custom full-home solutions, specializing in wood and iron structures for residential and commercial spaces. We pride ourselves on delivering high-quality, sustainable, and innovative products.

We are currently looking for a Production & Product Manager to join our dynamic team. This role is essential to streamline production processes, manage resources effectively, and ensure the delivery of exceptional products.

Key Responsibilities:

• Oversee the production line operations, ensuring optimal allocation of manpower, materials, and machinery.

• Develop and implement strategies to improve production efficiency and reduce waste.

• Manage inventory of raw materials, including wood and iron, and ensure timely procurement.

• Coordinate production schedules to meet customer demands and project deadlines.

• Supervise and train team members, fostering a culture of collaboration and excellence.

• Ensure adherence to quality standards and safety regulations.

• Maintain clear communication between production, logistics, and sales teams to ensure smooth operations.

• Provide technical expertise in board materials, including understanding specifications and applications.

Requirements:

• Proven experience in production management, preferably in wood or metal manufacturing.

• Strong knowledge of board materials (e.g., plywood, MDF, particleboard) and ironwork.

• Excellent organizational and problem-solving skills.

• Ability to optimize workflows and allocate resources effectively.

• Familiarity with production machinery and maintenance processes.

• Strong leadership and team management skills.

• Fluent in English; additional languages are a plus.

What We Offer:

• Competitive salary and performance-based incentives.

• Opportunities for professional development and career growth.

• A collaborative and innovative work environment.

Salary: $4500+commision, 6 days a week, 7 days leave a year, 7 days mc a year

Location: Singapore

If you are passionate about leading a production team and have a keen understanding of custom wood and ironworks, we want to hear from you!

How to Apply:

Send your resume and cover letter to [your email address]. Please include “Production & Product Manager Application” in the subject line.

Join us in shaping the future of custom home solutions!

- Able to lead, manage & motivate a team of operator & handler

- Assist in own department's manpower planning and deployment

- Ensure effective implementation of process procedure in production

- Ensure efficient and effective communications inter and intra departments

- Assist in ensuring smooth running of department operations of shift on duty

- Troubleshoot quality issue caused by production

Train operator in the production process to ensure that they work efficiently and safety

. JOB DESCRIPTION

Job Title

Carpentry production manager

Occupation

Supervisor and General Foreman (Furniture and Related Products Manufacturing)

Job Description & Requirements

Roles & Responsibilities

Must have at least 5 years experience

Must follow instruction and hard working and cooperative

Liaising with clients, suppliers and other construction professionals

Reading blueprints and designs to work to specifications prepared by other construction professionals, architects and building code recommendations

Starting from cutting and paste to build and install the finished carpentry work at the project site.

Good knowledge with the materials.

Good understanding of the drawings.

Good time management and teamwork spirits.

• Well Established Company
• Basic $3300 - $3800 + AWS + Variable Bonus
• Excellent Welfare and Benefits + Career progression
• Working location: Boon Lay
• Working day: Monday to Friday
• Working hours: 8.30am to 6.30pm

Job Responsibilities:

• Lead and supervise a team of QC inspectors overseeing daily QC inspections activities in compliance with established standards
• Provide training, coaching and mentoring to enhance the skills and performance of team members
• Prepare and maintain work schedule for the department to ensure optimize resource for overall efficiency
• Work with cross-functional teams to implement continuous improvement, track status of non-conformities and CAPA effectiveness
• Responsible for review and approval of DHR. Ensure quality records and samples are retained complying with good writing practice GDP requirements
• Implement quality documentation changes, such as QC procedures, process workflows, work instructions, etc. Guide the team to follow through the change
• Review and submit validation or verification measurement reports
• Perform daily process audit to meet quality operational requirements
• Ensure product identification and traceability of product are in place
• As calibration administrator, ensure equipment are calibrated correctly, provide accurate measurements and having proper identification
• Assist in customer complaint analysis, investigation of quality issues and corresponding improvement measures
• Authorize the release (COC) of products, COA review and approval
• Adhere to safety protocols and implement preventive measures to maintain a safe working environment
• Monitor and report KPI of QC team job performance, production quality trends, quality control charts, etc.
• Any other tasks as assigned by the superior

Job Requirements:

• Possess minimum professional certification / Diploma / Degree in relevant subject area
• Working knowledge on ISO13485:2016 and quality assurance / quality control of medical devices is an added advantage
• Familiar with use of various quality control tools and test equipment

Candidates are encouraged to apply this position via Apply Now button with the following information in the resume

• Work experiences and job responsibilities
• Current and Expected salary
• Reason for leaving
• Date of availability
• Education background

We regret that only shortlisted candidates will be contacted.

LIONG ZHAO GUAN (R22107632)

EA Recruitment Pte Ltd

EA License No: 21C0492

Working Location:Tai Seng
Working Days:5days (office hours)
Salary Range:$5,000 – $7,000

Job Scope:

• ATE Test Program Development for new products (Production and Characterization Test) with Teradyne (J750/UFlex) and Advantest testers.
• Design/Develop Final Test Loadboard and Wafersort Probecard
• Perform Characterization Testing, prepare test specifications, define tests, conditions, criteria, etc.
• Solid digital and mixed-signal pattern program development experience for ATE with C++/VB language and python script.
• Manage production test yield / quality, maverick / engineering lots
• Hands-on test debugging, RMA analysis, and improving test solutions (HW and SW)
• Establish cost-effective production test solutions
• Conduct product test and releases review, approve the test program releases.
• Excellent Product reliability & Test Processes qualification knowledge / requirements for automotive IC production

Job Requirement:

• ​​​​Minimum Bachelor's Degree in Engineering (Electrical/Electronics)
• Minimum 5-yrs ATE Test Program Development (C++ and/or VB)
• Experience in Test HW Development (Loadboard and Probecard)
• Knowledge on manufacturing process (fab, packaging, test)
• Hands-on development experience is must with Teradyne J750, Uflex ATE testers, IG-XL test programming,
• Advantage with the development experience in Chroma and other main stream testers.
• Development experience with Teradyne ATE testers, Chroma and other main stream testers.

Quah Siying (Jeslyn) R1982418

The Supreme HR Advisory Pte Ltd 14C7279

• Location: Admirax St [Nearest MRT: Sembawang]
• Working Days: 5 Day A Week
• Working hours : 9:00am - 6:00pm
• Salary : $3500 - $4000 (depends experience)

Responsibilities:

• Performs machine and process setup of die attach and moulding machines
• Able to performs machine troubleshooting.
• Performs mechanical alignment
• Ensure that the quality product is manufactured on schedule within the customer’s requirement
• Work with Cross functional Departments to resolve function, safety, quality and productivity related issue and improvement.

Requirements:

• Processed basic technical knowledge in machine set up and troubleshooting.
• Minimum 2 years experiences in semi-con production.
• Preferably with 2 years hand on experience in machine set-up and troubleshooting of die attach bonder.
• Must be willing to work in the cleanroom environment: wearing jumpsuits, safety helmet and safety shoes (only at customer side)
• Able to travel overseas whenever is needed.

Leong Jia Qi Reg No. : R24124746

The Supreme HR Advisory Pte Ltd EA No. : 14C7279

Bakery Production Worker x 2

• 5.5 days 44 hours per week, 8am-5pm/ 9am-6pm/ 11pm-5am/ 5pm-2am (can choose shift)
• Salary: Basic $1800 -$1900 + $100 allowance + OT, gross around $2600
• Location: Aljunied

Interested applicants can also send your resume to WA:+65 8839 3566 (Ms Angel) and allow our Consultant to match you with our Clients.

No Charges will be incurred by Candidates for any service rendered.

LIEW ONN KEE REG NO : R22108518

THE SUPREME HR ADVISORY EA NO:14C7279

Job Summary:
As a member of the Bakery Production Crew, you will play a vital role in the production of high-quality baked goods. You will work collaboratively with the team to ensure efficient operations, maintain cleanliness, and uphold the highest standards of food safety and quality.

Key Responsibilities:
Baking and Preparation:

• Assist in the preparation and baking of a variety of goods including pastries and cookies.
• Follow recipes accurately and consistently to ensure product quality.

Equipment Operation:

• Operate baking equipment such as mixers and ovens safely and effectively.
• Maintain equipment cleanliness and report any malfunctions to the supervisor.

Quality Control:

• Inspect ingredients and finished products for quality and freshness.
• Ensure that all products meet company standards before they are packaged or displayed.

Inventory Management:

• Assist in inventory management, including tracking supplies and ingredients.
• Help with receiving and storing deliveries.

Team Collaboration:

• Work closely with other team members to meet production goals.
• Participate in training and development opportunities as needed.

Sanitation and Safety:

• Maintain a clean and organized workspace, adhering to health and safety regulations.
• Follow proper food handling procedures to ensure product safety.

Requirements:

• Previous experience in a bakery or food production environment is required.
• Basic understanding of baking procedure

• Gained extensive experience in a food manufacturing environment, specializing in packaging soy-based and granola products according to various standards.
• Periodically performed warehousing tasks, including carton assembly, order picking, and receiving new inventory.
• Recorded receiving and order data accurately into forms or computer systems.
• Prepared and completed order documentation and reports as required.
• Adhered to all food safety protocols and compliance regulations.
• Packaged products such as soy milk pouches, granola bars, and pancake/wafer mixes into boxes or bags.
• Transported product trays to designated racks or storage locations.
• Conducted visual inspections and maintained documentation during production to ensure defect-free results.
• Assisted line mechanics with machinery repairs or other necessary tasks when required.
• Followed assignments provided by team leaders for tasks directly or indirectly related to the production line.

• Experience in application support role for min 5 years for support and good knowledge of Java, Unix/Linux, SQL
• Experience in Unix commands , SQL queries
• Experience in programming languages such as JAVA/J2EE.
• Knowledge of web applications, batch jobs, JBOSS, MariaDB, SQL, Shell
• Knowledge of Job scheduling, MQ setup
• Dynamic individual with thirst to learn
• Strong team player with excellent inter-personal skills & ability to meet SLAs

Responsibilities:

• Provide technical support in process engineering to facilitate production operations.
• Advice, support and carry out machine acceptance tests, qualification, and validation of production processes and equipment.
• Lead or participate in the investigation, troubleshooting, and root cause analysis for various production events and equipment failures; ensure that all relevant CAPAs are completed timely.
• Ensure adequate preventive & predictive maintenance to reduce equipment failures while maintaining quality and productivity; ensure adequate spare part inventory to meet the critical maintenance requirement.
• Work with and supervise vendors/contractors to ensure installation, repairs, or maintenance works are carried out timely and with minimal disruption to operations.
• Ensure compliance with GMP, regulatory requirements, ISO standards, EHS standards, and other relevant policies/standards.
• Ensure workplace safety and be responsible for notifying Management in a timely manner of EHS/GMP deficiencies.
• Support plant automation, Industry 4.0, and digital manufacturing initiatives.
• Any other duties and responsibilities as assigned by the Manager.

Requirements:

• Tertiary education in Electrical/Mechanical Engineering
• Minimum 3 years of related experience as a manufacturing process engineer in a Cosmetic, Food, or Pharmaceutical Manufacturing environment
• Well versed in GMP
• Good experience in automation and Industry 4.0 plant will be useful for work.
• Good communication and interpersonal skills
• Systematic and able to work under pressure
• Excellent analytical and good engineering problem-solving skills, workload resource planning, and prioritization skills
• An independent self-starter and a strong team player

The CPPS group is seeking a highly motivated scientist or senior scientist to lead and conduct research in Industry 5.0 smart manufacturing solutions and integrating digital technologies with AI-enabled physical production systems that promote human-centricity, environmental sustainability, and value chain resilience in manufacturing. The ideal candidate should have a strong background in controls and/or automation. Knowledge of PLC programming would be a strong advantage.

The key roles & responsibilities include, but are not limited to the following:

• Research into novel adaptive and autonomous control algorithms for scalable self-learning, self-optimizing and self-recovery production systems
• Working with a team of scientists and engineers to design and implement integrated IIOT and AI-enabled production systems for smart manufacturing
• Formulate scientific research directions and innovative proposals to secure competitive funding
• Understand the autonomous manufacturing domain and provide innovative solutions to industry problems in this area
• Familiarity with industry communication protocols such as OPC-UA, MQTT, Profibus, and RS-232 is needed

Job Requirement:

• PhD degree in Computer Science / Engineering, Electrical Engineering, Mechanical Engineering, with emphasis on controls and/or automation.
• Fresh Graduates with strong fundamentals in controls and IIOT are welcome. (For Senior Scientist) 5 years’ experience in research and leadership of R&D projects in the relevant area of expertise.
• Good track record of scientific publications in top journals or conferences
• Excellent technical presentation and writing skills
• Ability to develop and program PLCs and other control systems, utilizing platforms like TwinCAT, EcoStruxure, Codesys and others is a strong advantage
• Can-do attitude and able to work with different needs of various stakeholders
• Proactive team player and technically motivated to solve problems innovatively

Find Your Dream Job with Us

WE ARE HIRING!! Apply now and make a difference.

Role: Production Support Analyst

Job Requisition Number: JR46056

Job Level: 3-5 years of relevant experience (L2)

Location: Singapore

Job Objectives

Group Technology and Operations (GTO) provides software and system development, information technology support services and banking operations.

We have centralized and standardized the technology components into Singapore, creating a global footprint which can be utilized for supporting our regional subsidiaries and the branches around the world. We operate and support 19 countries with this architecture to provide a secure and flexible banking infrastructure.

Our operations divisions provide transactional customer services for our businesses while also focusing on cost efficiency through process improvements, automation and straight through processing.

Key Responsibilities

· Deliver a 1st class Production Support service to Channel’s stakeholders

· Responsible for availability, incident, problem and capacity management for the applications in scope

· Response and resolve incidents, problem and user queries through proper analysis

· Manage communication for Incidents (SLA breaches, Application Major Incidents, Logistics issue) and responsible for communications within team, manager and department

· Drive technical remediation in line with agreed non-functional requirements

· Evidence continual service improvement of processes and tasks (via automation)

· Ensures essential process / procedures are followed and contribute to defining standards.

· Coach and be receptive to coaching to uplift the team’s and your individual knowledge

· Communicate complex technical issues to business users in a language they understand

· Contribute in effective knowledge management best practices within team and organization

· Work closely with 1st & 3rd level support and development teams to the incidents, problem and users queries are resolved within SLA

Key Requirements:

Education:

· Bachelor’s degree in computer science or related field.

· At least 6 years’ relevant experience, preferably in a Finance Institution.

Essential:

· 5 + years of experience working in Banking IT industry support. Experience in Microsoft Dynamics CRM and Siebel CRM applications.

· Strong team player. Flexible and being able to manage time effectively.

· Able to work with a sense of urgency under multiple deadlines and successfully organize and complete tasks with minimal supervision.

· Experience in L2 / L3 support in a Production Support group in a high availability / mission critical environment.

· Strong understanding of ITIL methodology

Technical Skills:

· 5+ years of experience with Distributed Technologies – Microsoft Dynamics CRM, MS SQL Server, Unix, MQ, Oracle.

· Strong working experience in Microsoft Dynamics CRM application production support

· Strong understanding of Microsoft Dynamics CRM application architecture

· Excellent troubleshooting skills in Control-m batch issues, SSIS packages

· Strong automation skills (Unix Shell scripting / windows batch scripting or any other scripting language)

· Hands-On experience in writing / debugging scripts, code, and database queries

· Software Engineering & Change Management

· Solid understanding and execution of DR & BCP

· Good experience in Middleware MQ / BMC / Control-M/Remedy incident Management tools

· Competent in Microsoft Excel, PowerPoint and Word document

Please forward your resume in MS word format to [email protected] and

[email protected]

Please refer your friends for any IT openings as we have various positions.

Please do not send PDF Format Resume . Send the following details

1. Notice period

2. Current Salary

3. Expected Salary

4. Visa Status in Singapore

5. Current Location

• To supervise the work of sub-contractors and work closely with other operations staff to meet the project schedule
• Report to the Construction Manager
• You will adhere to construction procedures and safe work practices and ensure that works are executed within an acceptable standard of workmanship so as to meet the stringent requirement conducted during site tests and inspections
• Prepared and Assembled ready wooden cabinetry to drawings and specifications for installation.
• Verified dimensions and checked the quality and fit of pieces.
• Measured and marked dimensions of sites.
• Performed Cabinet assembly with the use of hand tools.
• Assisted with all aspects of the assembly team.
• Read detailed schematics for cabinets and executed assembly accurately.
• Helped with delivering and manually installing cabinets.
• Installed cabinets in residential homes.
• Minimum 3 years of relevant experience in the Construction Industry
• Possess a certificate in Building Construction Safety Supervisor (BCSS)
• Supervisory experience in foundation & structural works on site
• Able to work independently with a positive attitude

Project Description:

Treasury application Production support engagement covering technical issues, services and environment monitoring and EOD Batch support for a leading Singapore based bank

Responsibilities:

• L1 & L2 application technical and functional support in production treasury application support environment
• Monitoring and issue resolution of online trade booking applications
• Resolving technical services related issues, environment management and EOD batch support in morning/night/weekend shifts- 24/7
• Production support of Java/microservices application

Mandatory Skills Description:

• 0.5-2 years of experience in production application support environment
• Ability to read unix logs for debugging and troubleshooting.
• SQL experience is needed to fetch data
• Experience in providing L1 & L2 application technical and functional support
• Excellent team collaboration
• Excellent written and verbal communication skills
• Strong stakeholder management
• Flexible in working in shift timings and over weekends

Nice-to-Have Skills Description:

• Control-m experience
• Experience with Murex

Location: Tuas West

Salary range: Up to $3,500 + AWS + VB

Working hours: 8:00am to 5:15pm (Mon to Fri)

• Responsible for employing measuring techniques to determine most desirable suppliers.

• Monitoring supplier performance and recommend necessary action to improve performance (if any).

• Monitoring lead time per commodities and adjust as necessary.

• Developing plans and schedule for the execution of work using internal or subcontracted services; and monitoring progress of work.

• Preparing confidential information, perform expediting functions.

• Developing specifications to allow for competitive acquisition of items of a complex nature.

• Acting as a liaison between suppliers and internal company personnel.

• Performing other ad hoc duties as assigned.

Jessica Nguyen Huynh Thanh Truc

Recruiter (R23113787)

EA License No. 99C4599

We regret that only shortlisted candidates will be notified.

Drafter

• Woodlands
• Mondays to Fridays (8:30am to 5:30pm), Alternative Saturdays (8:30am to 1:30pm)
• $3000 - $3500

Responsibilities:

• Prepare Product / Architectural / Mechanical drawings with AutoCAD / Solidworks.
• Work within stated procedures to ensure that design records/controls are maintained.
• Provide product technical support to customers / suppliers.
• Ensure Supplier’s Quality meet our Quality Standard.
• To Initiate / propose / participate in Quality Improvement.
• Take part in new product development.
• Other ad-hoc job assigned by the supervisor.

Requirements:

• Min Degree in Mechanical/Engineering or equivalent.
• Good understanding of Precision machining processes.
• Well versed with manufacturing process & good understanding of material specifications common to Ironmongery industry.
• Minimum 3 to 4 years experience in mechanical field or Ironmongery industry.
• Well verse in Solidworks & AutoCAD Software.

Chew Xing Shan Reg No: R22107044

The Supreme HR Advisory Pte Ltd EA No: 14C7279

WhatsApp: +65 83592812 [Shannon]