Purpose of the Job:

• Conduct engine disassembly from modular level to piece part level, inspect and clean engine piece parts and hardwares, re-assemble engine for testing.
• Perform assembly or disassembly work at section level to meet production schedule.
• Upkeep & maintain assigned equipment, tooling and fixtures
• Support and participate in EHS and Continuous Improvement initiative

Key Job Accountabilities:

• Ensure all maintenance activities are conducted in accordance to engine manuals, approved technical data and regulatory requirements
• Ensure strict compliance to all EHS regulations
• A team player with effective communication/ interpersonal skills
• Ability to support overtime production work on ad-hoc basis as and when necessary

Required Experience and Qualifications:

• NITEC or Poly diploma in Mechanical Engineering or Aeronautical & Aerospace Technology
• At least 2 years’ work experience in disassembly/assembly/inspection in aviation industry
• Prior aviation experience in engine MRO facility will be an added advantage
• Technical skills in lock-wiring, torque application and manual interpretation required

Our client is from Manufacturing industry. They are looking for a Engineer, Product Costing to assist their team for the next phase of their business. They are located in North.

Duties:

• Lead cost-saving initiatives through Value Analysis Value Engineering (VAVE) or Design to Cost (DTC).
• Ensure timely and well-tracked cost reductions.
• Oversee the product lifecycle from entry to end-of-life.
• Represent the organization in cost-related initiatives.
• Compile and provide necessary reporting.

Requirements:

• Minimum Bachelors Diploma/ Degree in Mechanical or Electrical Engineering
• Minimum 3 years of experience in commodity / project management with supply chain and engineering
• Experience in VAVE is required.

Interested candidates who wish to apply for the advertised position, please click APPLY NOW or email an updated copy of your resume/cv. We regret that only shortlisted candidate will be notified.

Email address: [email protected]

Recruitpedia Pte. Ltd.

EA License No: 19C9682

EA Reg. No. R23115873 (New Jirn Tone)

• Responsible for hardware and software installation and maintenance.
• Assist in Microsoft Dynamic Navision ERP system and make Jet Reports.
• Develop and execute new EDI solutions and applications.
• Create and maintain EDI integration using XML.

Requirements:

• Diploma in IT or equivalent
• At least 3 years of hardware and software installation and maintenance experience and Navision Application support in Manufacturing function.
• Good knowledge of web development.

If you are keen to apply for the position, kindly email your detailed resume in MS Word to [email protected]

Please note that only shortlisted candidates will be notified.

For more job opportunities, please visit our website at www.recruit-expert.com

EA Licence: 19C9701

Registration: R1326740

Job Description:

• Participate in daily internal meetings or discussions to receive/provide status updates of tasks assigned to process team as well as to allocate urgent tasks
• Check ABN hold lots are release with countermeasures
• Follow up on daily line issues releated to process
• Focus on yield improvement activities to achieve planned yield variance
• Responsible for new product activities from NPI to production line for wire bond process
• Coordinate and ensure documents, specifications, machine buyoff are all carried out without quality concerns to ensure smooth introduction
• Follow-up and ensure Cpk and yield targets are met
• Assess new process / material introduction in the context of process improvement and cost reduction
• Communicate with vendors on different materials and identify the most cost effective solution
• Conduct research online as well as with competitors to assess feasibility
• Coordinate and follow-up on cost down activities to ensure timely introduction
• Perform any other duties assigned by Supervisor or Manager from time to time.

Our client is a Manufacturing MNC, one of the leading players in the Oil & Gas sector. Due to business needs, they are now recruiting a Procurement Specialist to be part of their Procurement team for ongoing transformation projects. They are located in the West – easily accessible.

The Responsible of Procurement Specialist are:

• Responsible for tactical sourcing of new parts to new and existing approved vendor list suppliers
• Responsible for price analysis and lead time negotiation with new suppliers
• Responsible for the negotiation to ensure and improve suppliers' price competitiveness, lead-time and on time delivery
• Responsible for RFQ (Request For Quotation)
• Responsible for creating Supplier contracts and negotiating for the terms and maintain Agreements in SAP
• Responsible for vendor management to ensure approved vendors meet the delivery, quality and cost standards
• Responsible to provide customers with solutions and internal cross functional teams, for cost effectiveness

Job Requirements:

• Minimum 2 years of procurement experience
• Minimum diploma and above

Interested candidates who wish to apply for the advertised position, please click APPLY NOW or email an updated copy of your resume/cv.

We regret that only shortlisted candidate will be notified.

Email: [email protected]

Recruitpedia Pte. Ltd.

EA License No. 19C9682

EA Reg. No. R2198636 (Oh Puey Xin)

Responsibilities:

• In charge of New Product Introduction Engineering matters
• Act as the main contact person to customers on any engineering issues
• Assume the role of Process Consultant to factory
• Work closely with factory on productivity issues, evaluate issues and cost improvement processes
• Fully in charge of Product Transfer to overseas factory and product training
• In charge of sourcing for special equipment / instruments
• Fully in charge in DFM/FMEA for NPI projects
• Responsible to generate ECN and BOM

Requirements:

• Graduate/Diploma in Engineering with experience in electronics industrial
• Minimum 10 years working experience in PCBA manufacturing process
• Experience in reading gerber
• Experience in Bill of Materials
• Experience in handling customers
• Experience in leading NPI projects preferred

Job Resposibilities :

• Provide engineering support on all equipment operational issues to meet production output and quality.
• Support engineer to evaluate, set up, qualify, maintain and calibrate test system for operation to meet customer needs, equipment specifications.
• Perform daily preventive maintenance for all Testers as per schedule and support engineer in equipment qualification and release to production in meeting output, quality & reliability.
• Provide line and engineering support that include equipment conversion, repair, maintenance and operational issues to minimize equipment downtime in meeting output, quality and cycletime.
• Prepare daily engineering reports and preventive maintenance checklist for all testers and compilation on equipment conversion/ downtime and performance index
• Perform test equipment set-up / conversion for operation.
• Maintain, install, troubleshoot and repair all in-house test production equipments
• Assist Leaders / Engineers in driving on their respective CIP’s improvements
• Assist Leaders / Engineers in driving on the productivity and cost control effective operation
• Organize, maintain and safe-keep equipment, spare parts and consumables.
• Update maintenance records.
• Lead / ensure good housekeeping, plant work discipline, ESD and safety awareness at all times.

• Monitor materials status of the China CM and EU CM and materials fulfilment to meet sale orders demand and forecast demand.
• Manage site inventory and PO to suppliers and make sure CM can cover the demand according to supply Lead Time.
• Release PO to suppliers on behalf of external factory, handle delivery or PO supersede by CM, arrange allocation and shipment to CM.
• Develop related operations flow and documented as standard operating procedures for the internal and outsourcing supply chain process.

Requirements:

• Diploma in Supply Chain Management or equivalent
• At least 4 years of Planning/Supply Chain experience in the electronics manufacturing industry.
• Good understanding of the Supply Chain and MRP activities.
• Proficient in SAP system.

If you are keen to apply for the position, kindly email your detailed resume in MS Word to [email protected]

Please note that only shortlisted candidates will be notified.

For more job opportunities, please visit our website at www.recruit-expert.com

EA Licence: 19C9701

Registration: R1326740

JOB DESCRIPTION & RESPONSIBILITIES

You will be part of the Alert Monitoring Team, to monitor pro-active and reactive alerts coming from various tools, perform 24 x 7 shift duties on rotation to support monitoring functions in BMC Control-M platform.

• Monitoring – scrutinizing alerts received from our various tools and ensuring that they are properly logged and worked on.
• Incident Ticket Management – entering alerts into ticketing tool (Remedy) and updating these tickets as necessary.
• Escalation – contacting various support teams as necessary to ensure alerts are properly managed.
• Automation – look into ways to automate repetitive tasks and work with vendors and internal parties to implement automated solutions.
• Process Improvement – continuously review current processes to identify rooms for improvement including automation and job optimization.
• Documentation – create and update documentation related to Operations Monitoring
• Audit – ensure that all documentations used by the team including processes, SOP’s and work instructions are complete, accurate and up to date.
• Reporting and Communications – create and distribute reports and communications related to Operations Monitoring.

JOB REQUIREMENTS/QUALIFICATION

• Diploma or Degree in IT, Computer Science, Engineering, Information Technology or related discipline from a recognized institution.
• At least 2 years of working experience in Job Monitoring Operations
• Information Technology Infrastructure Library (ITIL) foundation certification
• Able to communicate with all levels of the organization from senior management, junior staff and technical personnel.
• Able to work in a 24x7 shift roster
• Knowledgeable in using Microsoft Excel formulas, pivot tables and macros for creating and automating reports
• Experience in BMC Control-M platform

DESIRED SKILLS

• Self-driven and must be effective in working both independently and in a team setting, with minimum supervision.
• Good problem solving and logic skills
• Good communication skills (verbal and written) in English
• Excellent customer management skills

.collecting the desired goods

.loading them into the vehicles

.shipping them to the state destination

.unloading the merchandise and materials from the incoming vehicles and stacking them to the assigned locations in the storage facilities

.locating and moving the stock of products to crates or pallets for shipment or storage

Responsibilities:

• Responsible for working with the cross functional teams to improve the process / product quality and achieve the company and department KPIs
• Attending to customers on factory audit, quality issues and returns
• Responsible for resolving quality issues related to incoming, in-process, outgoing and customer complaints
• Providing support for New Product launch and raw material approval
• Overseeing the quality of new products from sample build to mass production by building a robust process
• Monitoring Supplier performance and liaising with suppliers to resolve quality issues and handing of Non-Conforming Material Report
• Conducting internal and external audits.
• Responsible for environmental compliance conformity of raw materials.

Requirements:

• Diploma with at least 3 years of experience in quality management / manufacturing environment/ Degree in the field of Mechanical/ Electrical & Electronics Engineering, Quality Certification or equivalent.
• Possess good knowledge of IATF16949, ISO9001, ISO13485 QMS, with auditing experience preferred.
• Experience in contract manufacturing of wire harness assembly, PCBA and Electro-mechanical assembly, handling of new products from new launch to mass production, on the Quality control & handing of customer complaint & returns.
• Experience on raw material compliance conformity (Eg.RoHS, Reach, Conflict of Mineral, Pro65) is preferred
• Good problem-solving & communication skills, resourceful and independent.
• Experienced in generating Quality procedures & knowledge of ESG Sustainability is an added advantage.

Responsibilities

• Responsible for leading root cause analysis & corrective action in nonconformance part investigation
• Responsible for establishing quality inspection plans, COC, procedures/ work instructionsHandle customer/supplier/ internal CARs
• Responsible for planning, coordinating & performing internal audits
• Responsible for performing gap analysis on standards revision and revise procedure/ work instructions
• Responsible for attending to customer/ supplier/ internal /certification audits & technical queries.

Requirements

• Min Diploma in Mechanical Engineering or equivalent
• Min 3 years of working experience in Oil & Gas/ Metal Machining Industry
• Experience in using measuring instruments such as caliper, bore gage, micrometer etc

Please kindly email your resume in Ms Word to [email protected]

We regret to inform that only shortlisted candidates would be notified.

Registration Number: R1328870

EA License No. 22C1026

Responsibilities

• Responsible managing waste water plant & DI water plant with existing chemistries, instrumentation.
• Responsible for providing technical support to the plating department water treatment, laboratory and engineering and
• manufacturing activities
• Responsible for leading the water treatment section to resolve all issues related water.

Requirements

• Min Degree in Engineering or relevant
• Min 3 years of working experience in manage water treatment system

Please kindly email your resume in Ms Word to [email protected]

We regret to inform that only shortlisted candidates would be notified.

Registration Number: R1328870

EA License No. 22C1026

Responsibilities

• Responsible for ensuring that corrective actions are in place and implemented for all non-conformances detected during audits
• Responsible for liaising with production side on the investigation of root cause of non-conformance and procedural failures
• Responsible for reviewing and approving required specifications and revisions in documentation prior releasing for production or customer
• Responsible for conducting process audit and internal quality scheduled/unscheduled audit
• Responsible for ensuring work is carried out in accordance with documented procedures

Requirements

• Min Diploma in Mechanical Engineering, Manufacturing or other relevant discipline
• Min 3 years of working experience in CNC/ Precision/ Machining Industry

Please kindly email your resume in Ms Word to [email protected]

We regret to inform that only shortlisted candidates would be notified.

Registration Number: R1328870

EA License No. 22C1026

Responsibilities

• Responsible for leading root cause analysis & corrective action in nonconformance part investigation
• Responsible for establishing quality inspection plans, COC, procedures/ work instructionsHandle customer/supplier/ internal CARs
• Responsible for planning, coordinating & performing internal audits
• Responsible for performing gap analysis on standards revision and revise procedure/ work instructions
• Responsible for attending to customer/ supplier/ internal /certification audits & technical queries.

Requirements

• Min 3 years of working experience in Oil & Gas/ Metal Machining Industry
• Experience in using measuring instruments such as caliper, bore gage, micrometer etc

Please kindly email your resume in Ms Word to [email protected]

We regret to inform that only shortlisted candidates would be notified.

Registration Number: R1328870

EA License No. 22C1026

Responsibilities

• Responsible for ensuring products produced meet the product and customers' quality requirement
• Responsible for developing and improving the processes to gain productivity, efficiency, quality and costs.
• Responsible for coordinating NPI/NPQ activities with details and meeting timeline.
• Responsible for supporting and resolving daily technical issues in operations
• Responsible for supporting analysis of failures from yield loss, reliability failures, new products, new materials.

Requirements

• Min Diploma in Electronic Engineering, Material Science or relevant
• Min 5 years of working experience in semicon assembly and test environment
• Experience in Assembly FOL of dicing, die attach, wire bond
• Experience in maintenance of assembly and test machines of dicing, die attach, wire bond encapsulation, testing

Please kindly email your resume in Ms Word to [email protected]

We regret to inform that only shortlisted candidates would be notified.

Registration Number: R1328870

EA License No. 22C1026

Responsibilities

• Responsible for supporting new product development, new product introduction and cost out designing for existing product lines through sound execution of engineering principles and processes
• Responsible in interfaces with design engineering in coordinating the release of new products.
• Responsible for estimating manufacturing cost, determines time standards, and makes recommendations for tooling and process requirements of new or existing product lines.

Requirements

• Min Degree in Electrical / Electronics / Mechatronics / Mechanical/ Microelectronics / Chemical Process Technology
• Min 5 years of working experience in Manufacturing Industry

Please kindly email your resume in Ms Word to [email protected]

We regret to inform that only shortlisted candidates would be notified.

Registration Number: R1328870

EA License No. 22C1026

Responsibilities

• Responsible for leading in continuous development and improvement of the company and assist in the development and formulation of long and short-range planning, policies, programs and objectives.
• Responsible for developing the operational plan and establish procedures for maintaining high standards of manufacturing operations to ensure that products conform to established customer, licensor and company quality standards.
• Responsible for achieving ptimum employee levels with least amount of overhead and raw material costs to meet annual budgetary plan.
• Responsible for developing and improving team through replacement, planning and activities
• Responsible for all the written performance reviews of all management and supervision within your area of responsibility

Requirements

• Min Diploma in Engineering
• Min 5 years of working experience in managerial role in Manufacturing / Oil&Gas/ Precision Industry

Please kindly email your resume in Ms Word to [email protected]

We regret to inform that only shortlisted candidates would be notified.

Registration Number: R1328870

EA License No. 22C1026

Responsibilities

• Responsible managing waste water plant & DI water plant with existing chemistries, instrumentation.
• Responsible for providing technical support to the plating department water treatment, laboratory and engineering and
• manufacturing activities
• Responsible for leading the water treatment section to resolve all issues related water.

Requirements

• Min Degree in Engineering or relevant
• Min 3 years of working experience in manage water treatment system

Please kindly email your resume in Ms Word to [email protected]

We regret to inform that only shortlisted candidates would be notified.

Registration Number: R1328870

EA License No. 22C1026

Responsibilities

• Responsible for providing support to new product development teams
• Responsible in advising customers in the areas of high-speed signal transmission and technology development, in accordance with department strategy and objectives in terms of quality and delivery time.
• Responsible for defining, planning and executing signal integrity deliverables, including modeling, simulation, and testing. Communicate SI deliverables via reports and presentations.

Requirements

• Min Degree in Electronics Engineering, Physics or its equivalent
• Min 3 years of working experience in designing and supporting high speed electrical components
• Proficient in software tools, finite elements simulation of electro-mechanical components as well as mathematical derivation and modeling of electro-mechanical parameters

Please kindly email your resume in Ms Word to [email protected]

We regret to inform that only shortlisted candidates would be notified.

Registration Number: R1328870

EA License No. 22C1026

Responsibilities:

• Responsible for managing and planning manufacturing process sequence, from receipt of raw materials till finished parts shipment.
• Responsible for developing new processes solid modeling and create/update work instructions, in accordance with engineering drawings and specifications.
• Responsible for leading and supporting continuous improvement projects
• Responsible for providing technical support to Production to achieve technical and quality requirements.
• Responsible for supporting Request for Quote (RFQ) proposal development and process

Requirement

• Min Diploma or Degree in Mechanical/Manufacturing/Aeronautical Engineering
• Min 3 years’ experience in Precision Engineering/ Aerospace/ Oil &Gas Manufacturing

Please kindly email your resume in Ms Word to [email protected]

We regret to inform that only shortlisted candidates would be notified.

Registration Number: R1328870

EA License No. 22C1026

Responsibilities

• Responsible for evaluating and qualify products to fulfil customer expectations regarding reliability, usability, and operating life

Requirements

• Min Diploma in Engineering
• Min 2 years of working experience in failure analysis of metals and materials related products
• Experience with test or life cycle management tools an advantage

Please kindly email your resume in Ms Word to [email protected]

We regret to inform that only shortlisted candidates would be notified.

Registration Number: R1328870

EA License No. 22C1026

Responsibilities

• Responsible for attending the customer complaints and develop resolution
• Responsible in planning and coordinating with the Production on non-conformance product screening as well as conducting containment measures and minimizes DMR issued by customers
• Responsible for providing engineering support to Internal Departments related to quality and technical issues

Requirements

• Min Degree in Mechanical Engineering or its equivalent
• Min 1 years of working experience in process or fixture designs

Please kindly email your resume in Ms Word to [email protected]

We regret to inform that only shortlisted candidates would be notified.

Registration Number: R1328870

EA License No. 22C1026

Responsibilities

• Responsible for evaluating and qualify products to fulfil customer expectations regarding reliability, usability, and operating life

Requirements

• Min Diploma in Engineering
• Min 2 years of working experience in failure analysis of metals and materials related products
• Experience with test or life cycle management tools an advantage

Please kindly email your resume in Ms Word to [email protected]

We regret to inform that only shortlisted candidates would be notified.

Registration Number: R1328870

EA License No. 22C1026

Responsibilities

• Responsible for inventory management ensuring the inventory is in healthy & good condition.
• Responsible for coordinating with manufacturing Plants and respective Supply Chain Management team to ensure materials and services are being delivered to the respective designation on time and in full (OTIF).
• Responsible for raising material/purchase requisition promptly and monitor the delivery status to ensure delivery is on-time and stock-out
• Responsible for Production Planning and Scheduling process and administrative handling.
• Responsible for performing material planning (MRP/JIT), sub-contracting and execution of raw material resources for Sales Order to meet on time and in full delivery (OTIF).

Requirements

• Min Diploma in Engineering, Supply Chain or Business
• Min 3 years of working experience in Production/ Material Planning in Manufacturing/ Oil&Gas/ Precision industry

Please kindly email your resume in Ms Word to [email protected]

We regret to inform that only shortlisted candidates would be notified.

Registration Number: R1328870

EA License No. 22C1026