· Lead in the preparation of detailed design reports, calculations and drawings.

· Prepare submissions to statutory agencies/ authorities.

· Lead in the coordination with other disciplines in preparation of design deliveries.

· Lead in preparing tender documentations.

· Participate in the tendering of projects.

· Participate in the successful delivery of projects.

· Training and mentoring juniors.

· Design management, coordination and project control on major projects.

· Perform any other duties as assigned.

Requirements:

· Degree in Civil or Structural Engineering from a recognized University and eligible for registration with the Professional Engineers Board (Singapore).

· A minimum of 5 years of design experience.

· Conversant with local codes and authority submission procedures

· Excellent interpersonal, good written and verbal communication skills

· Have good knowledge of common structural design software.

· Working experience in engineering design consulting practice on building, geotechnical, infrastructure, rail or road projects (underground/basement/elevated structures, tunnel structures and MRT station structures)

· Good project management skills and strong analytical skills

· Able to work under pressure with good time management skill

If you wish to have the opportunity to work in an international consultancy firm that offers attractive remuneration, a 5-day work week and a conducive environment to enhance your skills and experience, please send your full resume, including your salary expectations and contact number to

2 International Business Park, #06-08

The Strategy, Tower 1, Singapore 609930

Email: [email protected]

(Only shortlisted candidates will be notified)

· Lead in the preparation of detailed design reports, calculations and drawings.

· Prepare submissions to statutory agencies/ authorities.

· Lead in the coordination with other disciplines in preparation of design deliveries.

· Lead in preparing tender documentations.

· Participate in the tendering of projects.

· Participate in the successful delivery of projects.

· Training and mentoring juniors.

· Design management, coordination and project control on major projects.

· Perform any other duties as assigned.

Requirements:

· Degree in Civil or Structural Engineering from a recognized University and eligible for registration with the Professional Engineers Board (Singapore).

· A minimum of 5 years of design experience.

· Conversant with local codes and authority submission procedures

· Excellent interpersonal, good written and verbal communication skills

· Have good knowledge of common structural design software.

· Working experience in engineering design consulting practice on building, geotechnical, infrastructure, rail or road projects (underground/basement/elevated structures, tunnel structures and MRT station structures)

· Good project management skills and strong analytical skills

· Able to work under pressure with good time management skill

Geotechnical:

- Experienced in the design and design management of major earth retaining and stabilizing structures, deep foundations, reclamations, ground improvements, slope stabilities.

- Familiar with the preparation of Geotechnical Interpretative Reports.

- Familiar with the geotechnical impact assessment of structures and instrumentations.

- Familiar with the application of geotechnical FEM software.

If you wish to have the opportunity to work in an international consultancy firm that offers attractive remuneration, a 5-day work week and a conducive environment to enhance your skills and experience, please send your full resume, including your salary expectations and contact number to

2 International Business Park, #06-08

The Strategy, Tower 1, Singapore 609930

You will be part of an innovative and passionate team, working towards the one ultimate goal of producing high quality software. Your primary duties are design, prepare technical specifications, lead a team of developers, programming, unit-testing, and analytical problem-solving; but may include support for products implementation, integration testing and documentation.

The individual will:

• Responsible for the successful enhancement of software products and solutions by co-operating with other teams to ensure releases that are coordinated in terms of both time and technology.
• Design system architecture; translate user's requirements into functional and technical specifications.
• Participate and manage testing, debugging, verifying design and conduct reviews.· Participate and manage data and solution migration.
• Assist pre-sale in architect technical solution.
• To perform other duties as and when required.

Job Requirements

1. Good knowledge of Java, J2EE, Hibernate, Spring framework, Spring Boot, JSP, Oracle, Postgres, Struts and Restful Services, Spring Security, LDAP, XSLT,etc.

2. Experience on SOAP Service, JavaScript & jQuery will be an added advantage.

3. Experience in programming mobile application is added advantage

4. Experience with a responsive design for desktop/mobile.

5. Should have worked on 2-3 major projects.

6. Working experience with code versioning tools such as Git and SVN.

7. Effective communication skills in English.

8. Working in cross-functional teams and leading offshore outsourced development and support, Solution architecture consulting

9. 6+ years working experience as IT professional, with proven experience in solution architecture.

10. Wide knowledge and hands on experience in Open-Source Technologies

No experience/Diploma in Precision/Mechanical/Mechatronic/Electrical/Electronic/Industrial or related engineering

Basic (no experiene / fresh)-start from $2400-$2800+OT+allowances>$3K++

Diploma in Engineering

Have AWS & Bonus

Japanese MNC

Address: Gul Circle (Have company bus transportation islandwide)

Job Description

• Assist Supervisor in day-to-day operation lines.
• Planning & Co-coordinating the workflow on production lines to achieve production targets.
• Trouble shooting production problems and assist in planning new project work.
• Groom to be leader

Requirements

• Diploma in Engineering
• No experience / Entry level welcome to apply
  

Please submit your updated resume in MS format by using the APPLY NOW BUTTON.
Alternatively, you may also email your resume to us at [email protected]

Emily Fong
Senior Talent Specialist
Atomrecruit Pte. Ltd. | MOM EA License No.: 15C7443
EA Personnel Reg No.: R1768368

Job Description:

• Ensure incoming equipment meet the purchase specifications
• Arrange for protection and maintenance of equipment and system
• Review the commissioning work processes to enhance efficiency and productivity
• Review the commissioning work processes to enhance efficiency and productivity
• Coordinate with all sections for testing / commissioning requirements with different stakeholders and arrange for facilities and instruments for the job

Job Requirement:

• Degree/ Diploma in Naval Architecture/ Civil/ Marine & Offshore/ Mechanical / Electrical / Chemical Engineering / Certificate of Competency (Marine Engineer Officer) Class 1 (Motorship), or its equivalent
• At least 4 years of relevant experience for Engineer position, and 6 years of relevant experience for Senior Engineer position
• At least 4 years of relevant experience for Engineer position, and 6 years of relevant experience for Senior Engineer position.

Working hours & locations:

(Tuas Yard)

Pioneer Sector 1, Singapore 628437

(Islandwide transport provided)

Mon to Thurs: 8:00am - 5:15pm

Fri: 8:00am - 4:30pm

Interested candidates are invited to send us an updated resume with your current and expected salary and earliest availability.

We regret that only shortlisted candidates will be notified.

Please note that your personal data disclosed to Seatrium (SG) Pte Ltd and our group of companies, shall be used for the purposes of evaluation and processing in accordance with our recruitment processes and policies. By providing your personal data, you have consented to the aforesaid purpose under the provisions of the Personal Data Protection Act 2012.

• Candidate must possess at least Bachelor's Degree/Post Graduate Diploma/Professional Degree in Engineering(Civil) or equivalen.
• At least 2 years(s) of working experience in the related field is required for this position.
• Required Skill(s): Understand drawing, Quantity take off, Prepare BQ, Familiar with costing, Supplier sourcing, Contract administration.
• Preferably Senior Executive specialized in Engineering-Civil/Construction/Structural or equivalent.
• Familar with structural steelworks.
• Other QS duties as assigned from time to time.

Job Description

• Identify and evaluate problems / root cause of process inefficiency.
• Identify and source for the potential improvement method to improve process efficiency (Safety, Quality, Cost, Delivery and Environmental).
• Lead Project Team (Engineers and Technicians) on process improvement and development activities assigned.
• Develop process digitization concepts and drive big-data analytics for process knowledge improvement.
• Work closely with relevant departments for process improvement and breakthrough projects.
• Present and manage project progress, cost and completion deadline according to schedule.
• Any ad-hoc duties as assigned.

Job Requirements

• Degree in Metallurgy, Materials Science / Engineering, or equivalent with more than 3 years of relevant experience (Experience in Steel / Aluminum metallurgy and Heat Treatment is preferred).
• Diploma in the above-mentioned fields with more than 6 years of relevant experience.
• Knowledge of manufacturing processes and IIOT solution deployment is preferred.
• Preferably Sound knowledge in Process Improvement Methodology.
• Willing to travel; Willing to station 3-12 months in other countries subjected to project requirements.

Permanent, Full Time

We are seeking candidates with:

· A diploma/degree in Marine & Offshore Engineering, Mechanical Engineering, or Electrical Engineering.

· At least 2 years of experience in Engine Repair & Maintenance.

· Fresh graduates are welcome, and the company will provide training.

Roles & Responsibilities

· Perform the repair, maintenance, or overhaul of marine diesel engines 2 & 4 stroke under the supervision of Engineer / Technicians.

· Comply with all the requirements to carry out the jobs in the shipyards or anchorages.

· Lifting and shifting heavy components of engine back to the workshop for repair/reconditioning and vice-versa.

· Ensure prompt response and smooth communication with the customers

· Perform other tasks as may be assigned by the Operation Manager

Job Requirements:

· Relevant marine / mechanical / engineering qualification

· Hands-on experience in trouble-shooting, maintenance and repair is an added advantage

· Candidates with no experience may apply as apprentices as training will be provided

· Willing to work in a shipyard/anchorage environment

· Able to work overtime as and when needed

An attractive remuneration package and career growth opportunities await the successful candidates. Interested applicants are invited to email with detailed resumes indicating their current and expected salary.

Your Job

As a Test Engineer, your primary purpose is to drive quality, yield, and productivity improvements. You will manage the new product release to manufacturing and address any problems affecting the smooth operation of parts. You are responsible for all testing activities related to the transfer of new testers from the design center to the manufacturing plant, including working with the design team to qualify new test systems and propose test limits. Your role also involves sourcing and assembling tester components locally, setting up, and debugging test software and hardware.

Our Team

You will be part of the Data-Com and Specialty Solutions Division, reporting to a Senior Engineer, Principal Engineer, or Department Manager. In this role, you'll collaborate closely with a variety of contacts, including assembly subcontractors, vendors, suppliers, QA Engineers, and Product Design Engineers. This teamwork ensures the seamless integration of innovative solutions and product designs in production processes.

What You Will Do

• Responsible for all testing activities related to new tester transfer from design center to manufacturing plant. Work with design team qualifying new test system, proposing test limit.
• Sourcing, assembling all tester components locally, set up and debugging test software and hardware.
• Tester maintenance for on-line/off-line High-Performance testers, Cirris, BERT, OCR, Robert, etc.
• Perform electrical testing, high speed tester support used in the manufacturing of High-Speed cable assemblies based on standards such as Ethernet, Infiniband, Fibre Channel, PCIe, SAS, SATA, etc.
• Integration of custom designed circuit boards and mechanical fixtures with off-the-shelf test equipment such as digital sampling oscilloscopes, TDR modules and network analyzers.
• Integrate software upgrades into high-speed test systems. Work closely with design centers on software improvement feedback to improvise the system for better solutions.
• Perform electrical testing of High-Speed cable assemblies, analyze test data using statistical modeling tools, identify critical to quality aspects of product design and manufacturing process, perform root cause / corrective action analysis, and provide reports to summarize findings.
• Work closely with multifunctional teams to upgrade globally deployable automated production test systems for cable assembly products. Maintain records for project execution, schedule, and budget. System design includes activities such as mechanical fixture design, PCB design, hardware integration, software development, system documentation, performance testing and characterization, etc.
• Create and execute test plans, conduct software reviews, perform system verification and validation, analyze, and resolve failure modes and document the results.
• Create product and test system documentation, specification, and work instructions
• Introduction of new solutions / technologies in the design of production processes.
• Adherence to procedures related to system management of quality, health, safety and environmental.
• Perform work in accordance with the standards of personal and professional integrity as described in the Code of Ethics and Business Conduct. To comply to PBM Guiding Principles for the job carry out under his responsibility.
• Perform other related duties as assigned by Management.

Who You Are (Basic Qualifications)

• Possess a degree or diploma in Mechanical, Manufacturing, Production Engineering, Systems, or Computer fields.
• Minimum of 2 years of experience with test equipment and measuring instruments.
• Proficient in compiled programming languages such as C/C++ or VB/C# within the Microsoft .NET framework.
• Skilled in using scripted programming languages like Python.
• Strong analytical ability to apply logical reasoning, test assumptions, observe results, and make corrections.

What Will Put You Ahead

• 2-5 years of progressive engineering experience with a robust understanding of high-speed testing and design.
• Extensive experience with RF/microwave test and measurement equipment such as digital sampling oscilloscopes, TDR modules, and network analyzers.
• Knowledge of RF/microwave transmission line theory, including s-parameters, Fourier transforms, and characteristic impedance.
• Experience with relational databases using software like Microsoft SQL or MySQL.
• Exposure to RF/microwave circuit design and PCB layout with tools like Mentor Graphics PADS or Cadence Allegro, and familiarity with advanced PCB fabrication methods.
• Training in Lean/Six Sigma methodologies with an understanding and application of tools such as control charts, process capability, and gage R&R.

At Koch companies, we are entrepreneurs. This means we openly challenge the status quo, find new ways to create value and get rewarded for our individual contributions. Any compensation range provided for a role is an estimate determined by available market data. The actual amount may be higher or lower than the range provided considering each candidate’s knowledge, skills, abilities, and geographic location. If you have questions, please speak to your recruiter about the flexibility and detail of our compensation philosophy.

Who We Are

As a Koch company, Molex is a leading supplier of connectors and interconnect components, driving innovation in electronics and supporting industries from automotive to health care and consumer to data communications. The thousands of innovators who work for Molex have made us a global electronics leader. Our experienced people, groundbreaking products and leading-edge technologies help us deliver a wider array of solutions to more markets than ever before.

At Koch, employees are empowered to do what they do best to make life better. Learn how our business philosophy helps employees unleash their potential while creating value for themselves and the company.

Additionally, everyone has individual work and personal needs. We seek to enable the best work environment that helps you and the business work together to produce superior results.

Responsibilities

• Lead the execution of the Instrument & Control ITP inspection and test in compliance with rules and Tai Power requirement.
• Ensuring that the deliverables from engineering, fabrication, and principal contractors are of the right quality, according to company and industry requirements
• Supporting engineering design review and provide feedback from basic design, details design up to shop drawings such as SCADA, CCTV, Helideck weather monitoring, ESD, telecommunication, F&G
• Interpreting, implementing, and documenting the overall control philosophy across the wind farm components
• Preparing Instrument & Control equipment technical spec and RFQ for supporting procurement team during quotation sourcing
• Participate in preparation and review of Inspection and Test Plan (ITP) of the wind farm offshore substations (OSS) and commissioning procedure.
• Involving in EC/MC completion test package preparation to ensure construction completion handed over as per sequence and schedule
• Perform a daily supervision of the installation and commissioning
• Attending daily call out inspection and work closely with shipyard construction team, QA and commissioning team
• Involving in wind farm OSS final acceptance test / Proof Concept test procedure preparation.
• Participate in Factory Acceptance Tests (FAT) for wind farm OSS equipment
• Involving in O&M procedure preparation and conducting OSS maintenance execution during operation.
• In association with the Maintenance Systems group, review and update the technical content of the preventive maintenance procedures and to recommend changes where improvements in safety, quality or economy may be effected
• Contributing to the continuous development of new technologies to improve the performance and usability of our wind farm control systems

Requirements

• Bachelor Degree in Electronics/Instrumentation/Communication Engineering
• Knowledge in SCADA, PLA or DCS control system
• Problem solver, attention to details,
• Ability to analyze information and data objectively and logically
• Ability to apply creative thinking and problem-solving skills to complex challenges
• Ability to evaluate the reliability and validity of sources and evidence
• Ability to communicate effectively and persuasively with diverse audiences
• Ability to identify and anticipate potential risks and opportunities
• Possess excellent communication and interpersonal skills

Job Responsbilities

• Prepare of tender activities
• Perform process design and costing (CAPEX & OPEX)
• Perform technical proposal c/w PFD, P &ID
• Tender clarification & presentation (supporting sales activities)
• Assisting project team on technical matters (process design & calculation and sequence of operation)
• Assist to source new product technical evaluation

Job Qualifications

• Degree in Chemical/Mechanical/ Electrical Engineering
• Technical knowledge (i.e. Process Design and calculation) in membrane (MF/UF/RO/MBR), Ion Exchange (2B3T, MB, CPU, EDI) and pretreatment processes (coagulation/ flocculation, sedimentation, clarification, filtration)
• Relevant project management / plant testing & comissioning experience will be an added advantage
• Self-starter, highly motivated, driven by excellence and having an eye for details

JOB DESCRIPTION

• Plan and co-ordinate on the project progress and schedule and ensure timely completion
• Attend project meeting and prepare report for project progress update
• Prepare project budget and cost estimation
• Coordinate and plan to achieve project milestones, project deliverables and schedule monitoring
• Manage, control and monitor all project activities such as engineering design, site execution, testing and commissioning of project
• Prepare / review as built iso for claim purpose, follow up with client for any outstanding DO issue
• To prepare progress claim report and submit progress claim documents according to client requirement
• To prepare operations and maintenance manual after project completion
• To coordinate with inter-departments for operations matters (procurement, engineering, group office)

Competency Requirements

• Diploma or Degree in Mechanical Engineering
• At least 3 years of working experience in the related field
• Familiarity with semi-conductor/construction industry
• Proficient in Microsoft Office
• Knowledge of QA/QC procedure (PQR/WPS) will be an added advantage
• Multi-tasking team player with excellent interpersonal and communications skills
• Attended QEHS related awareness training

Description

• Lead, guide and train technicians
• Troubleshoot and diagnose faulty equipment reported by customers
• Check parts needed and ascertain costs of parts
• Repair Samsung CE produt at customer's place
• Update repair status in the system and follow up the case until job finish
• Answer customers' queries about repair details and parts change
• Escalate case to principal if necessary
• Visit customers to repair equipment on-site
• Any other ad-hoc duties as assigned

Requirement

• Independent and ability to work as a team
• Willing to learn
• Positive attitude
• Minimum GCE 'O' Level
• Able to converse/explain in English
• Able to carry/bring down heavy home applicance/s
• Prefer to have electronic product repair experience
• Preferably with washer/fridge repair experience
• Singapore class 3 driving license is a MUST

Training will be provided.

Working hours: Monday - Friday from 9am to 6pm / Saturday from 9am to 1pm (but must suport full day)

Job Responsibilties

• To prepare project QA & QC related documentation for wind farm related structure/submarine cable transportation and installation/ testing/ commissioning.
• To perform internal and external coordination to meet project quality requirement as per project quality plan.
• To implement and monitor project quality related compliance.
• To conduct fabrication site inspection as required at designated fabrication site, at various construction stages.
• To assist Project Manager in preparing project quality related documents to fulfil owner’s requirement.
• To assist in procurement of quality related items for operation.
• To coordinate with Project Engineer/Manager/T&I Manager in fulfilling quality related matters in project management.
• To be able to liaise with engineer for efficient workflow and contributing to better idea to improve work method.
• Respond to incoming requests for information, requests for proposals in a professional and creative manner.

Job Requirements

• Minimum Diploma/Bachelor’s Degree in Science/Engineering or equivalent
• MIn 5 years of relevant experience in the Oil & Gas, Renewal Energy industry
• Proficiency in ISO 9001:2015 Quality Management System
• CSWIP 3.1 certification or higher
• NDT Level II certification or higher

Responsibilities:

• Creates detailed designs for HVAC systems, including calculating heating and cooling loads, selecting
• appropriate equipment, and specify in system components.
• Prepares technical documentation/drawings, including Equipment Technical Specification, Duct &
• Instrument Diagram, Functional Design Specification, and Site Acceptance Test etc., and submit as per
• project schedule.
• Lead and manage technical meetings with shipyard/client.
• Works closely with shipyard/client, production and project team, suppliers and auditors
• Assist Engineering manager for engineering design and drawings works
• Other duties as assigned by the Management

Requirements:

• Degree/Diploma in Engineering or its equivalent
• Minimum of 3 years of experience in mechanical engineering, preferably in the HVAC marine and
• offshore sectors.
• Proficiency in AutoCAD software (AutoCAD), Carrier HAP (Hourly Analysis Program).
• Proficient in MS Office Word, Excel.

As an Ecolab Process engineer, the primary responsibility revolves around implementing tailored chemical treatment solutions for clients in the refinery and chemical process industry. This entails not only delivering effective treatments but also providing value-added services and managing projects aimed at reducing the Total Cost of Operation (TCO) for the clients. Additionally, the application engineer should be readily available to address any troubleshooting or queries related to Ecolab’s services and products. Given that refineries and chemical plants operate 24/7, the application engineer shall be committed to assisting clients even beyond regular office hours when necessary.

• Leading Chemical Treatment Programs: Take charge of implementing chemical treatment programs at the client’s site. Focus is on ensuring optimal performance and promptly addressing any deviations from the treatment plan.
• Reporting and Communication: Provide regular chemical treatment program reports to clients, keeping them informed about progress and updates according to the agreed schedule.
• Inventory and Equipment Management: Managing chemical inventory is essential. Oversee stock levels and equipment replacement parts program to ensure timely replenishment to support seamless operations.
• Monthly Reviews: Prepare and deliver comprehensive monthly review materials to clients. These reviews serve as a valuable platform for discussing program effectiveness and identifying areas for improvement.
• Analytical Field Testing: On-site field testing is a crucial aspect of the role. Conduct rigorous analytical tests to identify and rectify any off-specification issues within the chemical treatment program.
• Proposal Development: Collaborating closely with managers, contribute to the development of chemical treatment proposals. These proposals aim to enhance efficiency and address specific client needs. Participate in new application start-ups and evaluations.
• Value-Added Projects: Actively source and develop value-added projects in collaboration with clients. These projects are designed to reduce the Total Cost of Operation (TCO) with Ecolab’s product.
• Client Relationship Management: Building and nurturing strong relationships with clients is paramount. Frequent engagement ensures effective communication and mutual understanding.
• Subcontractor performance Management: Qualify, coordinate and monitor subcontractor’s performance delivery to enable seamless flow and delivery to end customer’s expectation.
• Troubleshooting and Collaboration: When clients encounter challenges related to chemical treatment programs or Ecolab’s products, step in to troubleshoot and collaborate with team members to find solutions.

Requirements:

• Educational Background: A Bachelor’s degree in Chemistry, Chemical Engineering or Environmental Engineering, coupled with relevant industry or technical experience is preferred.
• Industry Comfort: The successful candidate should feel at ease supporting clients within the petrochemical industry.
• Communication Skills: Exceptional organizational, interpersonal, and verbal and written communication skills are essential. Clear and concise communication is crucial in this role.
• Reporting Proficiency: The ability to write and maintain clear, concise reports using standard laptop computers is a key requirement.
• Logical Thinking and Decision-Making: We seek an individual who can think logically, apply common sense, and make informed decisions.
• Multitasking and Troubleshooting: Able to troubleshoot problems, manage multiple projects simultaneously and maintain project schedule timelines.
• Self-Motivation and Teamwork: The ideal candidate is self-motivated, goal-oriented, and equally adept at working collaboratively within a team.
• Safety: Able to comply with the Refinery and petrochemical industry and client safety requirement.
• Commuting: The role involves commuting to Jurong Island, and a company car will be provided for transportation. SG Class 3 driving license required.

Job Responsibilties:

• Plan and design mechanical engineering works for building services.
• Prepare reports, specifications, calculations, drawings and other documents prepared for the different stages of a project.
• Conduct design presentations, review shop drawings and material/equipment submissions, handle RFIs and other contract administration duties.
• Oversee the installation, testing and commissioning of Mechanical engineering works.

Job Requirements:

• Degree in Mechanical Engineering from a University recognized by the Professional Engineers Board, Singapore.
• Minimum 3-5 years of relevant experience in mechanical engineering design.
• Good working experience in a consulting firm with proven track records in major development projects.
• Knowledge of mechanical engineering design systems software.
• Knowledge of AutoCAD and/or Autodesk Revit is advantageous.
• Conversant with local codes and regulations, and authority submission procedures.
• A team player, able to work both independently and as a group, ensuring excellent project delivery to Clients and other stakeholders.

JOB DESCRIPTION: Candidate will be involved in industry projects and use 3D printing technology and other post processes to build parts.

RESPONSIBILITIES:

-Carry out data preparation and operate equipment to perform 3D printing, post-processes, inspection and testing as part of the industry project.

-To perform characterisation of coupons and components fabricated using 3D printing.

-Good skills in recording data, preparing and presenting technical results.

-Responsible for preparing and maintaining documentation for the operation of different equipment.

-Carry out routine maintenance, diagnostics checks, engage OEM vendors for preventive maintenance.

-Practice good housekeeping, organisation, and safety in the workplace.

-Responsible for ensuring duties are performed in a safe, efficient, and effective manner.

-To be a team player and learn new skillsets in an integrated team that develops new and advanced additive manufacturing technologies.

JOB REQUIREMENTS:

-NITEC or Diploma in Industrial Engineering, Aerospace Engineering, Mechanical Engineering, or in a relevant engineering discipline.

-At least 2-years work experience in manufacturing roles within the aerospace / MRO / oil and gas / manufacturing industry.

-Hands on experience with CAD/CAM software preferably NX would be preferred.

-Hands on experience in 3D printing is an added advantage.

-A team player who is motivated to solve technical challenges and deliver on time to customers.

-Willing to learn and adapt to cutting edge technology quickly.

-Good communication and interpersonal skills.

The above eligibility criteria are not exhaustive. A*STAR may include additional selection criteria based on its prevailing recruitment policies. These policies may be amended from time to time without notice. We regret that only shortlisted candidates will be notified.

• Coordinating with the client and attending client meeting whenever required
• Supervise and coordinate with team to produce deliverable per schedule and quality
• Administrative role of 3D modelling process with AVEVA software
• Review and comment on various engineering documents
• Design & incoporate structural components of project into AVEVA 3D model and produce 3D structural models
• Multi-discipline design coordination to avoid & correct interferences in AVEVA 3D model
• Prepare construction drawings (2D Structure drawings, bending template, profile nesting, plate nesting and material list) utilizing AVEVA Marine Drafting
• Modelling of Equipment and Outfitting in AVEVA
• Extraction of Outfitting General Arrangement from AVEVA
• Prepare a wide range of engineering related documents such as plot plans, Key plan
• Extraction of Piping layout and Piping General Arrangement from AVEVA
• Extraction of Isometric drawing with MTO and Line list
• Data consistency and Clash checking in AVEVA
• Prepare support drawings
• Checking the piping and other discipline documents as per shipyard payment
• Perform 3D Modelling of Electrical equipment and cable tray/ladder, supports and instruments in AVEVA
• Preparation of 2D deliverables (lighting layout, wiring diagram, equipment layout, interconnection diagram, cable tray/ladder layout, cable tray/ladder fill report and MCT layout)

Purpose and Scope

We are seeking a highly skilled and motivated E&I Engineer to join our team. The ideal candidate will possess extensive experience in electrical and instrumentation systems within power or utilities plant environments. This role involves ensuring optimal performance, safety, and reliability of E&I equipment while leading maintenance initiatives and improvements.

Key Roles and Responsibilities

• HSSE Compliance: Ensure adherence to plant Health, Safety, Security, and Environment (HSSE) standards. Actively participate in HSSE walkdowns and initiatives to maintain high safety standards.
• Methodology Preparation: Develop, review, and implement Method Statements (MS) and Risk Assessments (RA) for all electrical and instrumentation work activities to mitigate risks and enhance safety.
• Maintenance Planning: Plan and schedule both corrective and preventive maintenance works. Collaborate with operations, OEMs, and contractors to prioritize tasks, mobilize workforce, allocate resources, and procure necessary spare parts.
• Team Leadership: Lead and mentor technicians in executing preventive and corrective maintenance tasks, ensuring adherence to procedures and standards.
• Issue Troubleshooting: Diagnose and troubleshoot critical and major plant issues, participate in Root Cause Analysis (RCA) to identify solutions, and drive continuous plant improvement initiatives while managing costs effectively.
• Shutdown Management: Plan, schedule, and coordinate vendor/OEM shutdown maintenance of E&I systems. Lead shutdown activities and ensure thorough documentation is maintained.
• Procedure Development: Establish and optimize maintenance procedures for all electrical and instrumentation systems, promoting best practices.
• Instrumentation Expertise: Conduct maintenance and troubleshooting on field instrumentation, including control valves, performing loop checks, and executing calibration of instrumentation systems.
• Control Systems Proficiency: Troubleshoot and maintain PLC (Programmable Logic Controller) and DCS (Distributed Control Systems), with a strong emphasis on experience with Yokogawa Centum DCS systems.
• Electrical Systems Maintenance: Provide expertise in maintaining electrical systems, including switchgear, transformers, MV/LV switchboards, Fire alarm and CCTV systems.
• Spare Parts Management: Oversee the review and maintenance of plant critical spare parts inventory, ensuring availability and readiness.
• Documentation and Reporting: Maintain accurate records of maintenance activities and contribute to the preparation of technical documentation, standard operating procedures (SOPs), and maintenance manuals.
• Ad-hoc Duties: Execute other tasks and responsibilities as assigned to support operational objectives.

Qualification, Skills and Experience

• Bachelor’s degree or diploma in Electrical, Instrumentation, or Control System Engineering.
• Minimum of 8 years of relevant experience in a power plant or utilities plant environment.
• Technical Proficiency: Strong knowledge of field instrumentation, electrical systems, control systems, and industry standards.
• Problem Solving: Excellent analytical and troubleshooting abilities with a methodical approach to problem resolution.
• Team Collaboration: Proven ability to work effectively in a team environment, fostering collaboration and teamwork.
• Communication Skills: Strong communication and interpersonal skills, with the ability to present technical information clearly to various stakeholders.
• Proactive Attitude: Demonstrated ability to stay current with new technologies and apply innovative solutions to optimize plant operations.
• Leadership Qualities: Effective leadership and mentoring skills with a commitment to developing team members.
• Adaptability: Flexible and resourceful, with a positive attitude and willingness to learn from experienced colleagues.

At Sembcorp, our shared corporate behaviours underpin all the work that we do in building a sustainable future:

• Institution-first Mindset – Put the interest of the Group ahead of individual interests.
• Collaboration – Deliver through collaborating across markets, businesses and functions.
• Accountability – Hold team and self accountable to deliver on our commitments.

Responsibilities:

• Manage technical transfer of products/projects in assembly, testing, and customer interactions.
• Offer technical support for manufacturing and testing during product builds.
• Assist QC with technical support in resolving RMA issues.
• Support QA in compliance, regulatory matters, customer interactions, and audits.

Requirements:

• Diploma in Electronics Engineering and above.
• Minimum 2 years of working experience in Electronics Manufacturing Industry.
• Skilled in managing product/project manufacturing, transfers, and troubleshooting.
• Experienced in PCBA manufacturing and testing for products/projects.
• Preferably experienced in a manufacturing environment with ISO13485 and FDA standards.

_______________________________________________________

HOW TO APPLY :

Interested candidates, please submit your resume by clicking on “Quick Apply” or contact [email protected] for more details.

Please provide following information in the resume for immediate processing

1) Reasons for leaving current and/or last employment

2) Last drawn and/or current salary

3) Expected salary

4) Date of availability and/or Notice Period

All applications will be treated in strictest confidence and only shortlisted candidates will be notified

Wee Wai Dan

EA License No : 03C5391

EA Reg No : R22109628

Responsibilities:

• To have a role in VSAT product development team that participates in designing of LNA and Power Amplifier.
• Operating up to Ka band frequencies, the Up/Down Converter facilitates communication as part of its functionality.

Requirements:

• Bachelor’s Degree in Electronics Communication Engineering or equivalents.
• Minimum 3 years of experience in any RF systems.
• Experience in RF circuit design (LNA, PA, Up/Down Converter, Synthesizer).
• Experience in using simulation software.
• Experience in VSAT system or subsystem design.

____________________________________________________________

HOW TO APPLY :

Interested candidates, please submit your resume by clicking on “Quick Apply” or contact [email protected] for more details.

Please provide following information in the resume for immediate processing

1) Reasons for leaving current and/or last employment

2) Last drawn and/or current salary

3) Expected salary

4) Date of availability and/or Notice Period

All applications will be treated in strictest confidence and only shortlisted candidates will be notified

Wee Wai Dan

EA License No : 03C5391

EA Reg No : R22109628

Senior/Staff Software Engineer, Edge AI - Toolchain

Job Description

We are looking for Senior/Staff Software Engineers to grow our Edge AI & Systems software team to the next level. This team works within the larger ASIC team to architect and enhance Neural Network solutions in the Video Processor roadmap including these current and older products:

• https://www.ovt.com/products/oax8000/
• https://www.ovt.com/products/oax4600/
• https://www.ovt.com/products/oa7100/

This position works in a smaller team that specifies, develops and delivers the toolchain that allows our customers and partners to develop or port AI models to run optimally on our Neural Processing Units.

Responsibilities

• Specify and develop new toolchain features for existing and new NPU architectures, working with the inference engine sub-team
• Enhance, maintain and support existing toolchain features, and modify model network layers for NPU optimality, working with the application engineering teams and sometimes customers/partners.
• Constantly improve productivity through automation in all areas

Skills

• Strong Python class based product development skills based on knowledge of design patterns
• Strong understanding of all aspects of a compiler and related development and debugging technologies, code generation, program analysis, and pipeline optimizations
• Good communication, collaboration, task estimation & reporting, CI/CD via tools such as Confluence, Git, JIRA etc.
• Familiarity with the following is a plus:
• Deep Learning compilers like TVM
• Deep Learning framework - PyTorch
• Eclipse development for toolchain frontend
• CPU/DSP/GPU/NPU architectures

Requirements

1. Ph.D./MS/BS in Computer Science or Computer Engineering
2. At least 5 years of commercial development experience of which at least 3 are in compiler-related areas

The School of Civil and Environmental Engineering (CEE) is a leading school for Sustainable Built Environment. The school plays an integral role in spearheading tertiary education, advancing research innovations and providing professional services in a number of key disciplines in Civil and Environmental Engineering and Maritime Studies fields, with the objective of contributing to the technological and economic advancement of Singapore and beyond. The school’s mission in research is to achieve excellence by providing a conducive and intellectually stimulating environment to enable high quality work in strategic directions that are of significant impact to industry, science and technology.

We're hiring a Full-Stack Software Engineer for a short-term role to develop a software that employs artificial intelligence to manage ship and crew risks.

Key Responsibilities:

• Develop new software or enhance existing platforms to connect with multiple devices (e.g., smartwatches and tablets) and databases (e.g., AIS and weather data).
• Design and implement systems to monitor and control ship risks and enhance seafarer wellbeing.

Job Requirements:

• Education Qualification: Degree in Software Development and Engineering or equivalent
• Key Computing Skills:
  Proficiency in JavaScript or TypeScript (preferably TypeScript).
  Experience with Node.js.
  Competence in React.
  Knowledge of SQL databases (e.g., PostgreSQL, MySQL, or MariaDB).
  Knowledge of NoSQL databases (e.g., MongoDB, CouchDB, or Redis).
• Interpersonal skill
  Ability to work independently and develop solutions under strict timelines
  Meticulous attention to detail, with excellent organisational and time management skills
• Strong written and oral communication abilities
• Familiarity with the maritime industry is an advantage

We regret to inform that only shortlisted candidates will be notified.

Charmaine Soh | Reg No.: R24122333

Recruit Now Singapore Pte Ltd | EA Licence No.: 21C0845

---

One of Singapore’s established MNC company specializing within the Marine Industry providing integrated mooring and rigging services

Location: West (Clementi) - Company transportation provided from MRT

Working Hours: 5 Days Work Week, Mon to Fri (8.30am to 5.30pm)

Job Description:

Report to the Project Director / Manager in Charged of the WTW system.

• Provide technical expertise to oversee the design, development and construction of the WTW system.
• Interface with WTW system designer, vendors, fabricators including drawings reviews, sourcing equipment, cost control and monitoring, schedule monitoring and update.
• Oversee project implementation according to the requirements and objectives. This includes schedule monitoring, vendors sourcing and recommendation, purchase/ cost evaluation, resources allocation, attend to inquiries, clarifying technical details, supervising project execution, implementing corrective actions, conducting Factory Acceptance Tests, and finalizing as-built documentation.
• Diagnose and resolve malfunctions in deck machinery using technical manuals, hand tools, and power tools.
• Meticulously maintain records of all changes, maintenance, repairs, and inspections.
• Develop operating, maintenance and safety procedures for the WTW system.

Job Requirements:

• Degree in Mechatronic or equivalent
• Min 5 years working experience in Marine Industry or shipyard environment.
• Good understanding of deck machinery such as winch, crane, lifting and handling equipment and the related IACS (particular ABS, DNV, BV) rules and regulations.
• Specific experience in WTW system (Offshore Passenger Transfer System) is highly advantageous
• Strong understanding of mechanical principles, hydraulic and electrical system and P&ID with ability to perform trouble shooting.
• Ability to speak both English and Mandarin to liaise with Mandarin speaking clients
• Software – able to use MS Office, MS Powerpoint, MS Project, Adobe and AUTOCAD. Ability to use Primavera scheduling software is highly advantageous
• Good understanding of Document Control. Knowledge of ISO9001:2015 QAM system is highly advantageous
• The candidate must be willing to travel and work in marine and offshore environment.