Mechanical Contractor - Construction

• Basic: $4500 - $5500
• Variable Bonus
• 5 days (Office Hours)
• Location: Pioneer

Responsibilities:

• Coordinate with contractors, consultants, and clients to resolve technical M&E and DfMA issues.
• Collaborate with architectural and structural teams to manage design schedules and site coordination.
• Check DfMA prefab drawings, highlight discrepancies, and ensure alignment with production requirements.
• Oversee submission and approval of drawings with stakeholders, ensuring accurate service installations.
• Utilize Revit and CAD for drawing preparation and updates.

Requirements:

• Minimum Diploma/Degree in Engineering or Specialist Diploma in M&E Coordination.
• At least 1 years of experience in the construction industry.
• Strong knowledge of M&E coordination, structural, and architectural compliance.
• Ability to understand DfMA modular prefab requirements, including materials selection and fabrication.

For consideration, kindly submit your CV by clicking “APPLY Now”

**Only shortlisted candidate would be notified**

EA Reg. No: R23116143 | Lucky Lee

Purpose:

Ensuring that the manufacturing and engineering processes adhere to quality standards and regulations.

• To monitor and control the production process, ensuring that any defects or deviations are detected and corrected early.
• To inspect the finished product to ensure it meets all quality specifications and standards.

Key Area of Responsibilities:

• Responsible for manufacturing quality assurance including in-process quality, semi-finished product quality, and outgoing product quality.
• Lead a team of inspectors and supervisors to ensure incoming materials met internal and customer specifications and requirements.
• Drive incoming quality assurance process improvement in efficiency and effectiveness
• Owner of Non-Conformities and Error Management Systems. Collaborate with Headquarters for any system upgrade or changes
• Responsible for non-conforming materials disposition and Material Review Board (MRB)/ Corrective Action Board (CAB) and drive robust corrective and preventive actions
• Drive robust manufacturing system and process quality to meet internal and customer requirements and expectations
• Perform analysis on non-conforming quality incidents and internal errors and provide recommendations to meet internal and customer requirements and expectations
• Support Customer Quality to investigate customer product complaints
• Be responsible for manufacturing quality KPIs and reporting to senior management
• Lead a team of engineers to drive NPI and First Article quality requirements and system
• Provide leadership and consulting advice in quality matters
• Plan and lead manufacturing process audit to drive root cause analysis for outgoing inspection lapses.
• Lead, train, develop, and coach Quality team members. Manage performance evaluation and strengthen the organization.

Qualification & Experiences:

• Bachelor in Engineering (Mechanical, Electrical, Electronics, Chemical) or Material Science.
• 5 years of experience in Quality Assurance function, at least 3 years as a quality leader with supervisory experience in the manufacturing environment.
• Strong knowledge and practice in 8D, SPC, MSA, FMEA, QFD, 6-sigma methodology, PPAP, change management.
• Good understanding of First Article Inspection requirements and expectations
• Strong in statistical knowledge and 6-sigma methodology. Certified Black Belt or Green Belt preferred.
• Strategic, creative and systemic thinking
• Excellent leadership and effective communicator with all levels of associates and management.

Responsibilities:

• Collaborating with Process Engineer & Engineering team to establish QC standards.
• Creating documentation for inspection criteria and quality plans.
• Collaborating with QA, Process, and Product teams to address quality issues through corrective action.
• Conducting in-process audits and final quality control audits with the Process team.

Requirements:

• Diploma in Manufacturing/Quality Engineering or equivalents.
• Minimum 1 year of working experience in Electronics Manufacturing Industry.
• Responsible for controlling Supplier Quality Assurance (SQA).
• Oversight of quality control for incoming, in-process, and outgoing products.
• Knowledgeable in ISO 9001, 14001, 13485, and 45001, and FDA requirements.
• Understanding IPC requirements in PCB assembly and quality standards for various manufacturing processes such as plastic molding, die casting, extrusion, metal stamping, and machining parts.

_______________________________________________________

HOW TO APPLY :

Interested candidates, please submit your resume by clicking on “Quick Apply” or contact [email protected] for more details.

Please provide following information in the resume for immediate processing

1) Reasons for leaving current and/or last employment

2) Last drawn and/or current salary

3) Expected salary

4) Date of availability and/or Notice Period

All applications will be treated in strictest confidence and only shortlisted candidates will be notified

Wee Wai Dan

EA License No : 03C5391

EA Reg No : R22109628

Purpose: Responsible for establishing process steps to produce in-house-made parts and meet customer expectations concerning quality, lead time, cost, and technological needs. Process Engineer drives improvements in process methods to enhance performance and output.

Key Area of Responsibilities:

• Establish process steps to produce in-house-made parts and meet customer expectations in terms of quality, lead time, cost, and technological needs, without compromising health and safety.
• Create process routing (work instructions) & BOM in BaaN, and prepare an Inspection Method Sheet (IMS)/checklist.
• Read and interpret 2D drawing, 3D model and customer specifications on drawing.
• Ensure process routing is ready for both the first article and volume production.
• Perform sustaining engineering work (documentation of the process, optimization of resources, support production team, resolving technical/quality issues).
• Monitor process performance (quality, cost, lead time) and yield using tools (e.g.: SPC).
• Monitor First Article (FA) progress and resolve technical issues in a timely manner to ensure smooth production flow from FA to volume production.
• Drive improvements to process methods to enhance performance and output.
• Take accountability in leading special projects and processes, treating it like a specialist in the identified process assigned by a superior.

Qualification & Experiences:

• Degree in Mechanical, Precision Engineering, or other relevant discipline.
• Minimum 3 years of working experience in the precision machining industry.
• Strong knowledge of manufacturing processes
• Knowledge of interpretation of engineering drawing
• Knowledge of designing tools (GD&T)
• Problem Solving and Continuous Improvement

Job Description

• Interpret contract specifications, standards, and designs for construction
• Organise and lead meetings for design and construction; monitor and manages budgets; writes reports; and carries out additional administrative duties associated with the projects that are allocated
• Oversee mechanical scope planning, consulting coordination, and document control, including tracking sample submissions and drawing approval status
• Coordinate, organise, and prepare method statements, job hazards analysis and other prerequisites documents for mechanical equipment installation at site
• Oversee mechanical scope such as piping and equipment fabrication and installation, communicate with clients and subcontractors regarding issues, and guarantee the highest levels of workmanship
• Provide the mechanical designers with technical guidance on requirements
• Organise and/or participate in subcontractor and consultant meetings

Requirements

• Min diploma in Mechanical Engineering or a related field
• Min 3 years of construction experience
• Proficient in English writing and speaking.
• Microsoft application (words, excel, ppt etc)

Job Description

• Interpret contract specifications, standards, and designs for construction
• Organise and lead meetings for design and construction; monitor and manages budgets; writes reports; and carries out additional administrative duties associated with the projects that are allocated
• Oversee mechanical scope planning, consulting coordination, and document control, including tracking sample submissions and drawing approval status
• Coordinate, organise, and prepare method statements, job hazards analysis and other prerequisites documents for mechanical equipment installation at site
• Oversee mechanical scope such as piping and equipment fabrication and installation, communicate with clients and subcontractors regarding issues, and guarantee the highest levels of workmanship
• Provide the mechanical designers with technical guidance on requirements
• Organise and/or participate in subcontractor and consultant meetings

Requirements

• Min diploma in Mechanical Engineering or a related field
• Min 3 years of construction experience
• Proficient in English writing and speaking.
• Microsoft application (words, excel, ppt etc)

Responsibilities:

• Perform servicing of chillers & other HVAC equipment
• Carry out corrective and preventive maintenance for chillers and related equipment
• Have basic knowledge of overhaul & start up jobs on chillers
• Liaising with customers to resolve complaints cases
• Coordination with vendors and contractors in job coordination
• Assist or involve in schedule planning & prepare technical analysis reports for management’s review
• Ensure all works carried out in accordance with the specified quality and EHS standards
• Any other duties as deemed necessary from times to times

Requirements:

• NITEC/ Diploma/ Degree in Mechanical, Electrical, Electronic Engineering or equivalent
• Relevant experience in Chiller Systems/ Air-conditioning / BMS / ACMV / HVAC
• Positive attitude

HOW TO APPLY:

Interested applicants, kindly send your resume in MS WORD format to kenneth(at)trustrecruit.com.sg

We regret only shortlisted candidates will be notified.

Important Note: Trust Recruit Pte Ltd is committed to safeguarding your personal data in accordance with the Personal Data Protection Act (PDPA).

Please read our privacy statement on our corporate website www.trustrecruit.com.sg.

Trust Recruit Pte Ltd

EA License No: 19C9950

EA Personnel: Kenneth Tan Guan Quan

EA Personnel Reg No: R1550240

Responsibilities:

• After market sales related promotion to existing customers in Singapore
• Regular " patrol " activity as pro-active maintenance promotion. Patrol / Check machine condition / Report / Service proposal with quotation & manage prospective / secure order / execute maintenance job by team
• Solutioning skills such as Troubleshooting / proper report and action order to the team.
• Compressor system improvement proposals
• Energy saving proposal with existing system diagnosis
• Help up and coordination with Sales & Marketing department. Job task share when the existing customer does machine replacement or expansion / upgrading orders.

Requirements

• Diploma or above in Engineering related academic
• More than 3 years experience in similar industry
• Possess Class 3 Driving License.

HOW TO APPLY:

Interested applicants, kindly send your resume in MS WORD format to kenneth(at)trustrecruit.com.sg

We regret only shortlisted candidates will be notified.

Important Note: Trust Recruit Pte Ltd is committed to safeguarding your personal data in accordance with the Personal Data Protection Act (PDPA).

Please read our privacy statement on our corporate website www.trustrecruit.com.sg.

Trust Recruit Pte Ltd

EA License No: 19C9950

EA Personnel: Kenneth Tan Guan Quan

EA Personnel Reg No: R1550240

Job Responsibilities:

• Support continuous improvement efforts in QMS.
• Support in root cause analysis and implementation of corrective/ preventive actions for process related concerns.
• Analyze and provide timely respond to customer complaints.
• Interface with Customer and Operations to ensure new product transfer to manufacturing are in accordance with approved requirements.
• Prepare Quality performance metrics and reports.

Requirements:

• Diploma in Mechanical Engineering, Quality, or equivalent.
• Minimum 2 years work experience in Quality Management System in manufacturing environment.
• Good knowledge of ISO 9001. Knowledge of API Q1 is preferred.
• Strong command of English language, both oral & writing.
• Knowledge of metal working industry is preferred.
• Knowledge of risk assessment principles and methods.
• Knowledge of SAP is preferred.
• Positive & proactive attitude.

Your Job

As a Product Design Engineer specializing in IO connectors, your primary focus will be on supporting the development and manufacturing of new products. This will involve collaborating with manufacturing teams to review and provide feedback on the feasibility and plant capability of new concepts. You will also conduct analysis activities such as Proof of Concept (POC), Finite Element Analysis (FEA), and Tolerance Analysis to ensure product performance and integrity.

Our Team

You will be reporting to Manager, Product Design

What You Will Do

• Support of new Product Development and manufacturing for IO connectors.
• Review new concepts with manufacturing and provide feedback on feasibility and plant capability
• Support analysis activities such as POC, FEA and Tolerance Analysis
• Provide alternative solutions to resolve gaps in achieving target specifications
• Manage activities related to FOT, FSV and DVP&R testing
• Support existing product already in production or launching.
• Provide Engineering support of customer quality issues to ensure product reliability
• Provide Engineering support to plant for cost reductions and yield improvements
• Create Product Modifications and series expansions to increase market share
• Other duties as assigned by Management

Who You Are (Basic Qualifications)

• Bachelor’s degree in engineering
• 3 years mechanical product design experience with electronic products
• Experienced with product development process
• Understanding of Tolerance analysis, DFMEA, FEA
• Attention to details, be creative, good interpersonal skills to work effectively with internal cross functional teams and external customers
• Self-starter with confidence to initiate action independently

What Will Put You Ahead

• Bachelor’s degree in mechanical engineering and similar work experience
• From connector industries
• 5 years with specific high speed data connector design knowledge in the commercial or consumer space
• Knowledge of SMT design and signal integrity
• Strong mechanical aptitude and experience with clean sheet new product development component design
• Advanced tolerance stack understanding and risk mitigation skills
• Familiar with the component manufacturing environment, understanding of industry quality standards and requirements
• Basic knowledge on component design (injection, diecasting, sheet metal stamping)

At Koch companies, we are entrepreneurs. This means we openly challenge the status quo, find new ways to create value and get rewarded for our individual contributions. Any compensation range provided for a role is an estimate determined by available market data. The actual amount may be higher or lower than the range provided considering each candidate’s knowledge, skills, abilities, and geographic location. If you have questions, please speak to your recruiter about the flexibility and detail of our compensation philosophy.

Who We Are

As a Koch company, Molex is a leading supplier of connectors and interconnect components, driving innovation in electronics and supporting industries from automotive to health care and consumer to data communications. The thousands of innovators who work for Molex have made us a global electronics leader. Our experienced people, groundbreaking products and leading-edge technologies help us deliver a wider array of solutions to more markets than ever before.

At Koch, employees are empowered to do what they do best to make life better. Learn how our business philosophy helps employees unleash their potential while creating value for themselves and the company.

Additionally, everyone has individual work and personal needs. We seek to enable the best work environment that helps you and the business work together to produce superior results.

Your Job

Molex Singapore is seeking for a Process Outsource Engineer to support production process improvements for subcontractors outside Molex Singapore, ensuring quality, yield, and productivity enhancements. You will be responsible for the smooth release of new products to manufacturing, resolving process-related issues, and tracking assets.

Our Team

This role involves extensive collaboration with various internal departments, subcontractors, fabrication vendors, and machine vendors/suppliers.

What You Will Do

• Develop and continuously improve the sub-con quality system to meet agreed goals.
• Monitor project deadlines and budgetary expenditures.
• Collaborate with Sub-Con, Product Design, QA, and Components Engineers to ensure new product release for manufacturing, including full qualification.
• Implement productivity, quality, and cost reduction programs, as well as machine and process improvements.
• Address and resolve quality and process-related issues at sub-cons for assigned products.
• Provide production support to resolve sub-con quality/process problems.
• Manage product capacity expansion, including duplicating machines/fixtures if necessary.
• Qualify all tooling releases to manufacturing at sub-con.
• Maintain proper documentation control for process capability studies, process FMEA, SOPs, process specifications, OJT task analyses, training records, production records, and assets.
• Oversee equipment transfers from in-house to sub-con, ensuring machine setup and production qualification.
• Provide coaching and supervision for new engineers.

Who You Are (Basic Qualifications)

• Degree or Diploma in Mechanical, Manufacturing, or Production Engineering.
• Minimum of 4 years of experience in a similar position (for external candidates) or a minimum of 2 years in a Process Engineer position at Molex (for internal candidates).
• Proficient in process improvement.
• Knowledge of quality systems.
• Ability to identify and propose solutions for directional errors.

What Will Put You Ahead

• Ability to work effectively in a team environment.
• Willingness to take on challenges and demonstrate initiative.
• Six Sigma certification

At Koch companies, we are entrepreneurs. This means we openly challenge the status quo, find new ways to create value and get rewarded for our individual contributions. Any compensation range provided for a role is an estimate determined by available market data. The actual amount may be higher or lower than the range provided considering each candidate’s knowledge, skills, abilities, and geographic location. If you have questions, please speak to your recruiter about the flexibility and detail of our compensation philosophy.

Who We Are

As a Koch company, Molex is a leading supplier of connectors and interconnect components, driving innovation in electronics and supporting industries from automotive to health care and consumer to data communications. The thousands of innovators who work for Molex have made us a global electronics leader. Our experienced people, groundbreaking products and leading-edge technologies help us deliver a wider array of solutions to more markets than ever before.

At Koch, employees are empowered to do what they do best to make life better. Learn how our business philosophy helps employees unleash their potential while creating value for themselves and the company.

Additionally, everyone has individual work and personal needs. We seek to enable the best work environment that helps you and the business work together to produce superior results.

Your Job

You will be responsible for the design and development of new high-speed custom automation electrical control systems, machine software, and user interfaces. Your creativity is key to producing easy-to-operate, safe, on-time equipment that will give Molex a competitive advantage in the marketplace.

Our Team

You will be working closely with Mass Production, Quality, Product Design, Automation Mechanical Design, and Machine Build Teams. This collaborative environment ensures that all aspects of automation and manufacturing are seamlessly integrated and optimized.

What You Will Do

• Provides controls feasibility and equipment cost estimates to automation development team.
• Works with mechanical engineering department to determine design complete dates. Prioritizes work to fulfill deadlines.
• Specifies Control Hardware and generates Bills of Material, Designs Control Panels and Enclosures, Creates Electrical & Pnuematic Schematics.
• Assists in executing the machine debug, qualification, and installation
• Provides technical support for the launch of equipment produced by the LR-Automation Team. Responsibilities will include traveling to mass production facilities for machine install & qualification, training of technicians and operators to ensure the proper and safe operation of equipment and supports any software changes in the field.
• Attends Design Reviews and PFMEA’s while working with mechanical engineers to improve current and future designs of automation.
• Tracks projects using internal methods for summarizing component cost, labor, and leadtime. Develops accurate, up-to-date BOM’s and Spare Parts Lists
• Understands, supports, and contributes to complete projects according to internal product development procedures, TQM and IS/QS-9000 requirements. Embraces Six Sigma, International Standards Organization (ISO) and Environmental, and/or Health and Safety (EH&S) Management Systems by following stated policies and procedures.
• Performs other related duties as assigned by management.
• International Travel: Up to 20% per year.

Who You Are (Basic Qualifications)

• Associate's degree in Electrical Engineering or Electrical Engineering Technology.
• 3+ years of Control Panel Design & PLC Programming experience.
• 2+ years of Project Management experience.
• Proficiency in Yaskawa NON-IEC PLC Programming Language.
• Experience in generating industrial electrical schematics, including safety guarding standards.
• Expertise in the design and documentation of machine controls.
• Strong computer skills and the ability to read and interpret electrical and pneumatic drawings.

What Will Put You Ahead

• Bachelor's degree in Electrical Engineering.
• HMI Programming experience (Redlion, Pro-Face).
• Experience with Vision Systems (Cognex or Keyence).
• Scheduling and budgeting experience.
• Design experience with electrical connectors or cable assemblies and/or automotive assemblies.
• Some PC language programming skills (.Net or C++).

At Koch companies, we are entrepreneurs. This means we openly challenge the status quo, find new ways to create value and get rewarded for our individual contributions. Any compensation range provided for a role is an estimate determined by available market data. The actual amount may be higher or lower than the range provided considering each candidate’s knowledge, skills, abilities, and geographic location. If you have questions, please speak to your recruiter about the flexibility and detail of our compensation philosophy.

Who We Are

As a Koch company, Molex is a leading supplier of connectors and interconnect components, driving innovation in electronics and supporting industries from automotive to health care and consumer to data communications. The thousands of innovators who work for Molex have made us a global electronics leader. Our experienced people, groundbreaking products and leading-edge technologies help us deliver a wider array of solutions to more markets than ever before.

At Koch, employees are empowered to do what they do best to make life better. Learn how our business philosophy helps employees unleash their potential while creating value for themselves and the company.

Additionally, everyone has individual work and personal needs. We seek to enable the best work environment that helps you and the business work together to produce superior results.

Your Job

As a Product Design Engineer specializing in IO connectors, your primary focus will be on supporting the development and manufacturing of new products. This will involve collaborating with manufacturing teams to review and provide feedback on the feasibility and plant capability of new concepts. You will also conduct analysis activities such as Proof of Concept (POC), Finite Element Analysis (FEA), and Tolerance Analysis to ensure product performance and integrity.

Our Team

You will be reporting to Manager, Product Design

What You Will Do

• Support of new Product Development and manufacturing for IO connectors.
• Review new concepts with manufacturing and provide feedback on feasibility and plant capability
• Support analysis activities such as POC, FEA and Tolerance Analysis
• Provide alternative solutions to resolve gaps in achieving target specifications
• Manage activities related to FOT, FSV and DVP&R testing
• Support existing product already in production or launching.
• Provide Engineering support of customer quality issues to ensure product reliability
• Provide Engineering support to plant for cost reductions and yield improvements
• Create Product Modifications and series expansions to increase market share
• Other duties as assigned by Management

Who You Are (Basic Qualifications)

• Bachelor’s degree in engineering
• 3 years mechanical product design experience with electronic products
• Experienced with product development process
• Understanding of Tolerance analysis, DFMEA, FEA
• Attention to details, be creative, good interpersonal skills to work effectively with internal cross functional teams and external customers
• Self-starter with confidence to initiate action independently

What Will Put You Ahead

• Bachelor’s degree in mechanical engineering and similar work experience
• From connector industries
• 5 years with specific high speed data connector design knowledge in the commercial or consumer space
• Knowledge of SMT design and signal integrity
• Strong mechanical aptitude and experience with clean sheet new product development component design
• Advanced tolerance stack understanding and risk mitigation skills
• Familiar with the component manufacturing environment, understanding of industry quality standards and requirements
• Basic knowledge on component design (injection, diecasting, sheet metal stamping)

At Koch companies, we are entrepreneurs. This means we openly challenge the status quo, find new ways to create value and get rewarded for our individual contributions. Any compensation range provided for a role is an estimate determined by available market data. The actual amount may be higher or lower than the range provided considering each candidate’s knowledge, skills, abilities, and geographic location. If you have questions, please speak to your recruiter about the flexibility and detail of our compensation philosophy.

Who We Are

As a Koch company, Molex is a leading supplier of connectors and interconnect components, driving innovation in electronics and supporting industries from automotive to health care and consumer to data communications. The thousands of innovators who work for Molex have made us a global electronics leader. Our experienced people, groundbreaking products and leading-edge technologies help us deliver a wider array of solutions to more markets than ever before.

At Koch, employees are empowered to do what they do best to make life better. Learn how our business philosophy helps employees unleash their potential while creating value for themselves and the company.

Additionally, everyone has individual work and personal needs. We seek to enable the best work environment that helps you and the business work together to produce superior results.

Cost Estimation .Invoicing . Project Management . Budget Planning .Construction Schedule and Planning .Communicate with different Disciplines .Problem-solving .Generating Job Packs and Test Packages .Creating Work Method of Statements c/w Risk Assessment. Developing Strategies to improve Company performance,Provide supports to execute MOC (Management of Change) jobs, shutdown job, revamping and turnaround job and to ensure job is executed as Exxonmobil standard and specifications.

Developing Work method of statement, Job safety analysis, Risk Assessment.

Prepare and develop Job packs, Loop folders, test packages, red line mark ups and as-builting.

Prepare and procure materials. Prepare and submit material approval to client.

Review and verify Construction drawings, generates engineering query, field instructions.

Process and Construction and Management @ Jurong Island Field work.

• Design systems and components that meet needs and requirements.Produce outline designs.Conduct Experiments methodically, analyse data and interpret results.Test and evaluate theoretical designs.Identify, formulate and produce effective solutions to emerging problems.Evaluate final product’s overall performance, reliability and safety.Alter and modify design to meet requirements and to eliminate malfunctionsEstimate budget and scope of project.Solicit observations from operators.Prepare product reports and documentation.Engage in lifelong learning and develop new theories or methods

Responsibilities:

• Proficient in reading electrical and ELV schematic diagrams.
• Coordinate with Clients/Sub-Contractors on project and maintenance matters for smooth site execution.
• Review contract specifications and prepare variation orders as required.
• Perform engineering design, load, and fault calculations.
• Resolve technical issues related to installation, commissioning, and testing.
• Ensure installations comply with approved drawings, method statements, project specifications, and standards.
• Attend site meetings to discuss and resolve issues with Clients/Sub-Contractors.
• Assist Project/Site/Construction Manager in monitoring project progress.

Requirements:

• Minimum ITE in Electrical Engineering or equivalents.
• Experienced in project management for industrial and commercial projects.
• MRT project experience is an added advantage.
• Knowledge of design phases or street lighting work is a plus.

_______________________________________________________

HOW TO APPLY :

Interested candidates, please submit your resume by clicking on “Quick Apply” or contact [email protected] for more details.

Please provide following information in the resume for immediate processing

1) Reasons for leaving current and/or last employment

2) Last drawn and/or current salary

3) Expected salary

4) Date of availability and/or Notice Period

All applications will be treated in strictest confidence and only shortlisted candidates will be notified

Wee Wai Dan

EA License No : 03C5391

EA Reg No : R22109628

Responsibilities:

• Review specifications, clarifications, and drawings.
• Schedule works, requisition materials, control costs, and supervise projects.
• Coordinate with Structural, Architectural, and M&E teams to resolve issues.
• Ensure timely progress and compliance with safety and regulations.
• Conduct QA/QC and enforce safety on-site.
• Prepare progress and handover reports.
• Handle additional assigned tasks.

Requirements:

• Degree in Civil Engineering or equivalents.
• Miniumum 1 year of working experience in contruction industry.

_______________________________________________________

HOW TO APPLY :

Interested candidates, please submit your resume by clicking on “Quick Apply” or contact [email protected] for more details.

Please provide following information in the resume for immediate processing

1) Reasons for leaving current and/or last employment

2) Last drawn and/or current salary

3) Expected salary

4) Date of availability and/or Notice Period

All applications will be treated in strictest confidence and only shortlisted candidates will be notified

Wee Wai Dan

EA License No : 03C5391

EA Reg No : R22109628

Responsibilities:

• Manage assigned projects.
• Prepare submission documents based on specifications.
• Coordinate with customers on technical issues, approvals, and schedules.
• Develop and deliver switchboard training materials.
• Compile material lists for switchboard orders.

Requirements:

• Diploma/Degree in Electrical Engineering or equivalents.
• Minimum 1year related working experience.
• Proficient in Microsoft Office, AutoCAD.

_______________________________________________________

HOW TO APPLY :

Interested candidates, please submit your resume by clicking on “Quick Apply” or contact [email protected] for more details.

Please provide following information in the resume for immediate processing

1) Reasons for leaving current and/or last employment

2) Last drawn and/or current salary

3) Expected salary

4) Date of availability and/or Notice Period

All applications will be treated in strictest confidence and only shortlisted candidates will be notified

Wee Wai Dan

EA License No : 03C5391

EA Reg No : R22109628

Responsibilities:

• Review specifications, clarifications, and drawings.
• Schedule works, requisition materials, control costs, and supervise projects.
• Coordinate with Structural, Architectural, and M&E teams to resolve issues.
• Ensure timely progress and compliance with safety and regulations.
• Conduct QA/QC and enforce safety on-site.
• Prepare progress and handover reports.
• Handle additional assigned tasks.

Requirements:

• Degree in Civil Engineering with PEB recognition.
• Working experience in A1/A2 building companies is preferred.

_______________________________________________________

HOW TO APPLY :

Interested candidates, please submit your resume by clicking on “Quick Apply” or contact [email protected] for more details.

Please provide following information in the resume for immediate processing

1) Reasons for leaving current and/or last employment

2) Last drawn and/or current salary

3) Expected salary

4) Date of availability and/or Notice Period

All applications will be treated in strictest confidence and only shortlisted candidates will be notified

Wee Wai Dan

EA License No : 03C5391

EA Reg No : R22109628

Responsibilities:

• Work closely with design engineers and architects to create and document detailed test plans for verifying the SoC design.
• Establish and manage the infrastructure and environment for automated verification of the SoC's architecture, functionality, and performance.
• Develop reusable testbenches, test cases using constrained-random and directed methods, and verification modules for both block and system levels.
• Create a regression strategy, methodology, and scripting tools, ensuring comprehensive function coverage and addressing verification gaps before design releases and tape-out.
• Collaborate with design engineers to troubleshoot and resolve simulation issues.
• Provide support to test engineers during post-silicon validation.
• Mentor and guide team members and junior engineers, aiming to enhance verification efficiency.​

Requirements:

• Master in Electrical Engineering or equivalent with 8 years of relevant working experience/ PhD in Electrical Engineering or equivalent with 3 years working experience.
• Extensive understanding of UVM/OVM, Semiformal Verification, assertion-based verification, and hardware-software co-verification methodology.
• Skilled in Verilog, SystemVerilog, Python, Perl, TCL, Shell scripting, C/C++, SystemC, and assembly coding for industry-standard ISAs.
• Familiar with MIPI, AMBA (APB/AHB/AXI) bus protocols, RISC-V/ARM, or DSP cores.
• Experience in verifying designs at RTL and post-P&R gate levels.

__________________________________________________________

HOW TO APPLY :

Interested candidates, please submit your resume by clicking on “Quick Apply” or contact [email protected] for more details.

Please provide following information in the resume for immediate processing

1) Reasons for leaving current and/or last employment

2) Last drawn and/or current salary

3) Expected salary

4) Date of availability and/or Notice Period

All applications will be treated in strictest confidence and only shortlisted candidates will be notified

Wee Wai Dan

EA License No : 03C5391

EA Reg No : R22109628

Responsibilities:

• Manage technical transfer of products/projects in assembly, testing, and customer interactions.
• Offer technical support for manufacturing and testing during product builds.
• Assist QC with technical support in resolving RMA issues.
• Support QA in compliance, regulatory matters, customer interactions, and audits.

Requirements:

• Diploma in Electronics Engineering and above.
• Minimum 2 years of working experience in Electronics Manufacturing Industry.
• Skilled in managing product/project manufacturing, transfers, and troubleshooting.
• Experienced in PCBA manufacturing and testing for products/projects.
• Preferably experienced in a manufacturing environment with ISO13485 and FDA standards.

_______________________________________________________

HOW TO APPLY :

Interested candidates, please submit your resume by clicking on “Quick Apply” or contact [email protected] for more details.

Please provide following information in the resume for immediate processing

1) Reasons for leaving current and/or last employment

2) Last drawn and/or current salary

3) Expected salary

4) Date of availability and/or Notice Period

All applications will be treated in strictest confidence and only shortlisted candidates will be notified

Wee Wai Dan

EA License No : 03C5391

EA Reg No : R22109628

Responsibilities:

• Assist Project Manager with project functions, including project management, site management, and risk control to achieve project goals.
• Support Project Manager in planning and coordinating construction works according to the master and detailed work programs.
• Guide junior Engineers in daily work execution.
• Prepare and submit project documents such as schedules, method statements, design plans, risk assessments, and reports.
• Supervise construction to ensure compliance with contract specifications, drawings, quality standards, and ESH practices.
• Coordinate and liaise with clients, authorities, consultants, subcontractors, and suppliers on all project matters.
• Facilitate site inspections, submit technical reports, and maintain records. Assist in verifying progress payments and contractor claims.
• Attend regular meetings with clients, consultants, and contractors to monitor project progress.
• Establish and maintain a document control system for design drawings and project documents.

Requirements:

• Bachelor’s degree in Civil Engineering recognized by the Professional Engineer Board.
• At least 3 years of working experience in construction and infrastructure industry (LTA, Roadwaorks, MRT Projects).

______________________________________________________

HOW TO APPLY :

Interested candidates, please submit your resume by clicking on “Quick Apply” or contact [email protected] for more details.

Please provide following information in the resume for immediate processing

1) Reasons for leaving current and/or last employment

2) Last drawn and/or current salary

3) Expected salary

4) Date of availability and/or Notice Period

All applications will be treated in strictest confidence and only shortlisted candidates will be notified

Wee Wai Dan

EA License No : 03C5391

EA Reg No : R22109628

Responsibilities:

• Lead RTL design, simulation, and verification for TetraMem ASIC/SoC products, ensuring robustness.
• Integrate and validate IP blocks for seamless system functionality.
• Analyze requirements for Power, Performance, and Area (PPA), optimizing design trade-offs.
• Collaborate with backend team in RTL coding, implementation, and synthesis for successful tapeout.
• Create and maintain reusable IPs for AI/in-memory computing.
• Support Post-Si testing to ensure product functionality and quality.
• Mentor junior engineers to facilitate their professional growth.
• Contribute to design reviews for improved product performance and reliability.
• Stay current on RTL design methodologies for efficiency and quality.
• Collaborate with cross-functional teams for successful product development.

Requirements:

• Minimum Master in Electrical Engineering with 5 years of working experience with emphasis on RTL/SoC/digital design.
• Proficient in Verilog and SystemVerilog.
• Proficient in VCS, Verdi, or similar industry-standard tools.
• Skilled in pre-layout and post-layout simulation.
• Knowledgeable about the design flow and collaboration with backend teams.
• Familiar with AMBA APB and AXI protocols.
• Familiar with RISC/Arm or other core architectures.

__________________________________________________________

HOW TO APPLY :

Interested candidates, please submit your resume by clicking on “Quick Apply” or contact [email protected] for more details.

Please provide following information in the resume for immediate processing

1) Reasons for leaving current and/or last employment

2) Last drawn and/or current salary

3) Expected salary

4) Date of availability and/or Notice Period

All applications will be treated in strictest confidence and only shortlisted candidates will be notified

Wee Wai Dan

EA License No : 03C5391

EA Reg No : R22109628

Responsibilities:

• Create mixed-signal verification and coverage strategies tailored to complex IC designs, aligning with design architecture and specifications.
• Construct verification testbenches using standard verification languages and methodologies, ensuring comprehensive coverage.
• Author and execute test cases to validate mixed-signal circuits, focusing on functionality, performance, and reliability.
• Analyze verification results meticulously, offering constructive feedback to design teams for improvements.
• Collaborate closely with design and layout teams to pinpoint and resolve any design issues encountered during verification.
• Innovate and refine verification methodologies, tools, and techniques to enhance scalability and portability.
• Provide final sign-off on mixed-signal designs, ensuring readiness for tape-out.

Requirements:

• Bachelor’s degree in electrical & electronic or equivalents and with minimum 7 years of working experience.
• Proficient in analog and mixed-signal circuit design and verification principles.
• Capability to formulate test plans, deliver presentations on findings, and communicate effectively with cross-functional teams.
• Familiarity with verification methodologies and tools including simulators, waveform viewers, automated execution, simulation time optimization, and coverage analysis.
• Proficient in programming abilities, capable of crafting efficient scripts or programs in languages such as Perl, Python, and/or C.

__________________________________________________

HOW TO APPLY :

Interested candidates, please submit your resume by clicking on “Quick Apply” or contact [email protected] for more details.

Please provide following information in the resume for immediate processing

1) Reasons for leaving current and/or last employment

2) Last drawn and/or current salary

3) Expected salary

4) Date of availability and/or Notice Period

All applications will be treated in strictest confidence and only shortlisted candidates will be notified

Wee Wai Dan

EA License No : 03C5391

EA Reg No : R22109628

Responsibilities:

• Assist in planning, executing, and coordinating construction tasks according to the master and detailed work schedules.
• Prepare and submit essential project documents such as timelines, method statements, design plans, risk evaluations, and monthly updates.
• Oversee construction work to ensure it adheres to contract terms, drawings, quality standards, and Environmental, Safety & Health (ESH) guidelines.
• Collaborate with Clients, Authorities, Consultants, Subcontractors, and Suppliers on all aspects of the project, providing solutions and ensuring proper documentation.
• Coordinate with clients and consultants for site inspections, submit technical reports, and maintain accurate site records. Assist the QS department in reviewing contractor claims and progress payments.
• Attend meetings with Clients, Consultants, and Contractors to monitor project timelines and ensure progress is on track.
• Maintain an organized document control system, reviewing detailed design drawings and project specifications.

Requirements:

• Bachelor’s degree in Civil Engineering recognized by the Professional Engineer Board.
• At least 2 years of working experience in the construction and infrastructure industry.

______________________________________________________

HOW TO APPLY :

Interested candidates, please submit your resume by clicking on “Quick Apply” or contact [email protected] for more details.

Please provide following information in the resume for immediate processing

1) Reasons for leaving current and/or last employment

2) Last drawn and/or current salary

3) Expected salary

4) Date of availability and/or Notice Period

All applications will be treated in strictest confidence and only shortlisted candidates will be notified

Wee Wai Dan

EA License No : 03C5391

EA Reg No : R22109628