Job Descriptions:

* Familiar with analytical systems such as O2, Ammonia, pH, TOC, TRC, Conductivity and etc Analyzer, and instruments (PIT, TIT, FIT, etc)

* Coordinate with internal team, vendors, and contractors to ensure smooth project execution.

* Supervise and lead Installation and Commissioning and initial calibration of various Analyzer, instruments, sensors, etc. Troubleshoot and resolve any technical issues that arise during installation and commissioning.

* Perform Electrical & Pressure Tests, Factory Acceptance Test (FAT), Site Acceptance Tests (SAT)

* Perform site commissioning for instrumentation & Control System, analytical systems and project-related jobs

* Carry out preventive maintenance and corrective maintenance of analytics systems services

* Ensure all documentation is accurate and up-to-date, technical documents, not limited to installation report, testing and commissioning report, etc

* Ensure all installations & commissioning meet customer specifications and industry standards.

* Ad-hoc engineering support to customer when required.

* Willing to work on fast pace environment.

Job Requirements:

* Degree in Engineering (Mechanical, Environmental, Science, Electronics/Electrical Engineering or equivalent qualification)

* Strong analytical & troubleshooting skills

* Preferably 3 - 5 years of working experience or more in the analytical instruments or related field.

* Knowledge of analyzers, instrumentation would be advantageous.

* Able to work independently and write effective good service report

* Good work experience with Hart communicator, calibration, and PLC/SCADA would be advantageous

* Good planning and time management skills to achieve job efficiency.

* Customer orientated with a positive attitude

* Ability to work well with others in a team environment, providing input and feedback in a helpful manner.

* Strong team player with excellent interpersonal and communication skills, ability to work independently, Pro-active and able to work in a fast paced environment and handle multiple tasks when required.

Interested applicant please send resume with expected remuneration to [email protected]

We regret that only shortlisted candidates will be notified.

Role: Quality Engineer (QE)

Position Overview:

The Quality Engineer is responsible for ensuring the quality of construction materials, processes, and workmanship throughout a project. This role involves QA/QC document developing; monitoring site quality control activities; monitoring compliance with standards; implementing quality assurance procedures to deliver projects that meet contract, client specifications, international standards and Singapore regulatory requirements. This role is essential to delivering high-quality, durable, and safe civil engineering projects while maintaining efficiency and minimizing risks.

Key Responsibilities:

1. Take part in developing QA procedures as per the required by project Quality Assurance Plan.

2. Develop and/or review QC report templates, checklists as per ITPs.

3. Take part in developing quality training materials as per project quality requirements, and technical specifications. Conduct quality training to subcontractors’ QC inspectors and site supervisors.

4. Conduct regular checks for site QC activities and QC report completion.

5. Take part in project internal quality audits in accordance with project audit procedure to ensure compliance with company ISO 9001 QMS, Singapore regulatory requirements. Identify non-conformities and work with project teams to implement corrective and preventive actions.

6. Take part in project external quality audits to subcontractors in accordance with project audit procedure to ensure compliance with subcontract, project specifications, codes, and Singapore regulatory requirements. Identify non-conformities and work with project teams to implement corrective and preventive actions.

7. Regularly monitor project KPIs, ensure out-of-target KPIs are identified and raised to applicable subcontractors for root cause analysis, at the meantime, report to QAQC manager.

8. Coordinate with discipline engineers, subcontractors, the client, third party inspectors to ensure project quality requirements are met.

Work Environment:

Ø Combination of office and on-site work.

Ø Working overtime may be required, and working at a fast pace.

Requirements for the role:

Ø Degree or Advanced Diploma in Civil Engineering or related engineering field.

Ø At least 6 years of relevant QE experience in Singapore.

Ø Experience in quality assurance (QA) and QA document developing.

Ø Experience in site quality control (QC) related inspection and tests.

Ø Experience in defects rectifications.

Ø Strong knowledge of construction materials, techniques, and standards (BS EN, SS, ASTM).

Ø Excellent problem-solving and analytical skills.

Ø Strong communication and interpersonal skills.

Ø Certification in Quality Management (e.g., ISO 9001) is a plus.

Responsibilities

• Responsible for implementing ISP Algorithm into HW using Verilog, SystemVerilog and/or SystemC (High Level Synthesis)
• Verify Logic at ISP level and Digital System level
• Optimize Design for less gate count and low power consumption
• Drive ISP Design activities in close collaboration with ISP Algorithm Team

Requirements

• Minimum MSEE, or BSEE, or related/equivalent discipline
• Experience / knowledge in RTL, C/C++ programming and verification
• Strong debugging and problem-solving skills
• Good communication and interpersonal skills
• Result oriented and embrace change behaviours
• C++/SystemC knowledge with High Level Synthesis experience is a plus.
• Experience / knowledge in CMOS Image Sensor is a plus

As an Associate Quality Engineer to be ensuring effective quality control, continuous improvement and in line with Zero Defects Philosophy to the end-to-end value chain.

Your main responsibilities:

• Benchmark quality control in production, to develop internal work processes and improvement handling to ensure quality assurance.
• Analyze process weakness and Quality performance data and work with internal departments (including external suppliers) on quality improvement plans.
• Create, review and update inspection SOPs, inspection checklist, control plan or special inspection instructions when needed.
• Coordinate with upstream and downstream process department/teams on quality related issues.
• Provide timely response to customers complaints including root cause analysis, facilitate containment, initiate improvements etc.
• Ensure that the department is readily prepared for internal and external quality audits.
• Initiate quality checks when needed and resolve system integrity wherever possible.
• Handle product recalls/delivery stops/rework processes to be taken place in the factory premises whenever the need arises in a timely and satisfactory manner.
• Administrator for documents relating to group standards and ensure timely implementation and awareness of relevant standards.
• Monitoring of engineering change management to ensure proper process handling from both internal and external suppliers.
• Organizing calibration for measuring tools
• To review the product warranty from the FAS and promote the improvement with the team.
• Ad-hoc duties where required.

Your Background:

• Degree/Diploma in Engineering or related field
• Minimum 2 years of working experience

Do you want to learn more?

This position is based in Singapore. If this interests you, please upload your CV/resume and cover letter today via our Careers portal.

We look forward to hearing from you.

Job Responsibilities:

• To develop E&I shop drawings based on client given information, specifications, calculations
• Able to make revisions and incorporate comments made by clients
• Make the drawings in keeping with Company standards
• To provide MTO based on drawing details
• Required to maintain all drawing files, update drawings as needed, and make corrections to drawings as directed by the Section Head/Leads
• Explain drawings to production or construction teams and provide adjustments as necessary
• Must be able to work in an environment with schedules and priorities
• Hands on knowledge on Auto-cad is essential

Job Requirements:

• Diploma/Bachelor Degree in Electrical Engineering or equivalent
• Hands on AutoCAD knowledge
• Able to work in an environment with tight schedules and priorities

Job Description:

• Develop system safety program plan, hazard analyses and risk assessment documents, safety assessment report and hazard logs based on contracted system safety and project requirements
• Facilitate system safety reviews and assessment with project system safety working groups and to facilitate and seek technical endorsement for safety assessment report with company and customer safety review boards
• Ensure system safety requirements and implementation are complied with company process and contracted requirements for projects and in-house products
• Submit monthly project status report and updates to Project Manager, System Safety Leads and Department Manager
• Support safety related administrative functions
• Conduct failure investigation and prepares reports for problems or issues based on findings from facts, research, studies and makes necessary recommendations and submits to relevant authority for approval
• Prepare and studies technical drawings, specifications of mechanical systems inclusive of engine, transmission, powerpack and driveline, and scopes of work to ensure (Maintenance, Repair and Overhaul) MRO operations conform to standards and customer requirements
• Document work procedures based on technical requirements for the MRO components
• Analyse and interpret test information to resolve repaired related problems
• Design, maintain, service and implement components so to be able to integrate into in-service systems, and interpret specifications and mechanical drawings for any re-engineering work required
• Responsible include training technicians; planning, assigning, and directing work to a group of technicians; appraising addressing complaints and resolving problems
• Appoint to be lead for a Platform to ensure the MRO Component serviceability is met at all times
• Perform literature searches on the subject area for MRO in Mechanical System especially in engine and transmission
• Assist in providing technology solutions to overcome more complex MRO systems so to allow work focuses upon the effective integration of people, processes, tools and technology in order to improve the MRO into the next level

Job Requirements:

• Degree/ Diploma in Mechanical Engineering with 2 year of working experience related to Automotive fields or MRO Services
• Certified Reliability Engineer will be an added advantage
• Able to read and understand mechanical drawings
• Possess good interpersonal skills and strong ability to work within a team
• Good interpersonal & communication skills
• Ability to present ideas, approach and objectives clearly
• Work under pressure, independent and self-motivated
• Good listener, and able to understand customers problem or question and help them solve it
• Customer orientated
• Good analytical and problem solving skills
• Good communication skills and a strong team player
• Independent, highly motivated, meticulous, resourceful and possess a positive attitude

Key Roles and Responsibilities:

Marine Vessel Maintenance & Repair

• Perform regular inspections, maintenance, and repair work on marine vessels, including engines, propulsion systems, electrical systems, and HVAC systems.
• Troubleshoot and diagnose issues with marine equipment, machinery, and systems.
• Carry out emergency repairs and provide solutions to minimize downtime and ensure the continued safety of operations

Technical Support & Problem-Solving

• Provide technical support for complex repairs, ensuring compliance with safety and environmental regulations.
• Work closely with ship crews and offshore teams to address immediate and long-term repair needs.
• Develop and implement corrective actions to improve vessel performance and reduce operational risks.

Documentation & Reporting

• Maintain accurate records of all maintenance and repair activities, includingreports on inspections, repairs, parts used, and time spent.
• Ensure all repair work complies with regulatory and industry standards and is appropriately documented for audit purposes.
• Prepare maintenance schedules and provide recommendations for necessary upgradesor replacements.

Quality Control & Safety Compliance

• Monitor the quality of repair work and ensure all maintenance activities are carried out to the highest standards.
• Ensure compliance with maritime safety and environmental regulations, including adherence to SOLAS (Safety of Life at Sea) and MARPOL (Marine Pollution) requirements.
• Conduct safety checks and recommend improvements to prevent future damage or failure.

Collaboration with Other Departments

• Work closely with the project management, procurement, and logistics teams to ensure timely delivery of parts and services required for repairs.
• Collaborate with vendors, suppliers, and manufacturers for technical support and part procurement.

Training & Development

• Provide technical guidance and training to junior engineers, technicians, and crew members on vessel repairs and maintenance.
• Stay updated with the latest developments in marine engineering technology, repair techniques, and industry standards.

Qualifications & Requirements:

• Bachelor's degree or diploma in Marine Engineering, Mechanical Engineering, or a related field.
• Minimum of 3-5 years of experience in marine repair, maintenance, and troubleshooting of marine vessels.
• In-depth knowledge of marine systems such as propulsion, electrical, mechanical, and safety equipment.
• Stron understanding of maritime safety regulations and industry standards.
• Ability to read and interpret technical drawings and manuals.
• Strong problem-solving and troubleshooting skills.
• Good communication skills and the ability to work in a team environment.
• Must be willing to work offshore or in dry docks if required.
• Certification in marine safety and repair procedures (e.g., STCW, Basic Safety Training) is a plus.

Benefits:

• Competitive salary and benefits package
• Opportunities for career advancement and professional development
• A dynamic and supportive work environment

If you are passionate about marine engineering and have the skills to ensure the safe and efficient operation of marine vessels, we would love to hear from you. Apply today!

Your Job

As a Product Design Engineer specializing in IO connectors, your primary focus will be on supporting the development and manufacturing of new products. This will involve collaborating with manufacturing teams to review and provide feedback on the feasibility and plant capability of new concepts. You will also conduct analysis activities such as Proof of Concept (POC), Finite Element Analysis (FEA), and Tolerance Analysis to ensure product performance and integrity.

Our Team

You will be reporting to Manager, Product Design

What You Will Do

• Support of new Product Development and manufacturing for IO connectors.
• Review new concepts with manufacturing and provide feedback on feasibility and plant capability
• Support analysis activities such as POC, FEA and Tolerance Analysis
• Provide alternative solutions to resolve gaps in achieving target specifications
• Manage activities related to FOT, FSV and DVP&R testing
• Support existing product already in production or launching.
• Provide Engineering support of customer quality issues to ensure product reliability
• Provide Engineering support to plant for cost reductions and yield improvements
• Create Product Modifications and series expansions to increase market share
• Other duties as assigned by Management

Who You Are (Basic Qualifications)

• Bachelor’s degree in engineering
• 3 years mechanical product design experience with electronic products
• Experienced with product development process
• Understanding of Tolerance analysis, DFMEA, FEA
• Attention to details, be creative, good interpersonal skills to work effectively with internal cross functional teams and external customers
• Self-starter with confidence to initiate action independently

What Will Put You Ahead

• Bachelor’s degree in mechanical engineering and similar work experience
• From connector industries
• 5 years with specific high speed data connector design knowledge in the commercial or consumer space
• Knowledge of SMT design and signal integrity
• Strong mechanical aptitude and experience with clean sheet new product development component design
• Advanced tolerance stack understanding and risk mitigation skills
• Familiar with the component manufacturing environment, understanding of industry quality standards and requirements
• Basic knowledge on component design (injection, diecasting, sheet metal stamping)

At Koch companies, we are entrepreneurs. This means we openly challenge the status quo, find new ways to create value and get rewarded for our individual contributions. Any compensation range provided for a role is an estimate determined by available market data. The actual amount may be higher or lower than the range provided considering each candidate’s knowledge, skills, abilities, and geographic location. If you have questions, please speak to your recruiter about the flexibility and detail of our compensation philosophy.

Who We Are

As a Koch company, Molex is a leading supplier of connectors and interconnect components, driving innovation in electronics and supporting industries from automotive to health care and consumer to data communications. The thousands of innovators who work for Molex have made us a global electronics leader. Our experienced people, groundbreaking products and leading-edge technologies help us deliver a wider array of solutions to more markets than ever before.

At Koch, employees are empowered to do what they do best to make life better. Learn how our business philosophy helps employees unleash their potential while creating value for themselves and the company.

Additionally, everyone has individual work and personal needs. We seek to enable the best work environment that helps you and the business work together to produce superior results.

Job Description & Requirements

You will be part of an innovative and passionate team, working towards the one ultimate goal of producing high quality software. Your primary duties are design, prepare technical specifications, lead a team of developers, programming, unit-testing, and analytical problem-solving; but may include support for products implementation, integration testing and documentation.

The individual will:

• Responsible for the successful enhancement of software products and solutions by co-operating with other teams to ensure releases that are coordinated in terms of both time and technology.
• Design system architecture; translate user's requirements into functional and technical specifications.
• Participate and manage testing, debugging, verifying design and conduct reviews.· Participate and manage data and solution migration.
• Assist pre-sale in architect technical solution.
• To perform other duties as and when required.

Skills Requirements

• Degree in Computer Science or Information Technology or equivalent.
• In-depth experience in Java
• Working knowledge of Object-Oriented
• Working knowledge on any web framework, with understand MVC concept on the web-based application
• Working knowledge on conceptualizing and designing web-based application
• Preferable knowledge and experience in Spring and Hibernate Framework, Spring Boot, REST, Drools, HTML5, Oracle.
• Possess a passion in software engineering/development, with drives to be an effective team leader
• Ability to communicate effectively and clearly
• He or she should show self-initiative in learning, and self-development
• Ability to work under pressure to deliver projects within the designated deadlines.
• At least 2 to 5 years of relevant experience

#TeSA #TMCA

• Provide advanced manufacturing electrical and controls expertise in leading detailed and comprehensive planning for conceptualization, specification, development and implementation of right-sized manufacturing and facility equipment.
• Manage electrical and control portions of capital equipment expenditures that support new product designs, factory capacity or efficiency additions.
• Manage multiple projects and/or provide leadership for larger equipment control projects.
• Must be able to analyse needs and determine best electrical & instrumentations recommendations for equipment / process to optimize cost & performance.
• Able to select the right-sized equipment, workstation design, material presentation, standard work and single piece flow. Use data and statistics to characterize delivered manufacturing process capabilities in qualifying the release of processes and equipment
• Able to design panel (HMI, PLC, RIO) and provide line drawing according to client needs.
• Able to perform IQ/OQ test during commissioning.
• Able to perform costing base on selected instrument or given drawing.
• Automation knowledge.
• Identify and resolve operational problems and minimise delays.
• Select, guide and develop a team of project member with operational responsibilities to ensure that the organisation achieves it business objectives and complies with all relevant regulations and laws.
• Ensure that organisation and government standards on safety are met.
• Ensure that customer quality specifications are constantly met.
• Allocate capital and human resources to maximise productivity.
• Supervise and implement project expense, other assets and resource within budget.
• Provide guidance to junior and perform any tasks or duties as assigned by Management.
• You will oversee the safety and job/project operation.
• Ensure job completed and hand over on schedule.
• You will be attending safety or projects meeting.

Mechanical Contractor - Construction

• Basic: $4000 - $5000
• Variable Bonus
• 5 days (Office Hours)
• Location: Pioneer

Responsibilities:

• Work with Process team on in-process audit and FQC Audit.
• Work with Process Engineer & Engineering team on QC requirements
• Contriol of Supplier QUality Assurance (SQA).
• Quality Control of in-coming, in-process and out-going products.
• Prepare and compile report after inspection.
• Plan on construction site visit and liaise with Project Managers or Engineers.

Requirements:

• Min. IT in Manufacturing or Quality Engineering with 1 year of relevant experience.
• Knowledge of IS0 9001, 14001, 13485 & 45001
• Ability to understand DfMA modular prefab requirements, including materials selection and fabrication.

For consideration, kindly submit your CV by clicking “APPLY Now”

**Only shortlisted candidate would be notified**

EA Reg. No: R23116143 | Lucky Lee

1.Min. 10 years experience in engineering, maintenance and project execution in controls, electrical and instrumentation in Oil & Gas and Petrochemical Industries.Knowledgeable in DCS, SCADA, IPS, PLC, Interlock Logic Diagrams, Instrumentation Loop Drawings, Electrical Drawings, P&IDs.Competent in handling Honeywell (EPKS) Experion PKS (including back-up restore, HMI Web Builder, PAS Plant State Suite Alarm Management System, Corworx Software and Maximo/SAP.

Deliver all assigned C&N activities in a cost-effective, safe and efficient manner through contractors with minimum interruption to operating plant and ensure field work sequences are aligned,

Lead contractors in field activities with high safety standards; ensure all field activities comply with authorities, industrial and company HSE standards and requirements.

Organize and chair risk assessments discussions to ensure hazard are identified and mitigated for all C&N assigned activities.

Collaborate with stakeholders, coordinates reviews and schedule optimizations, resource leveling etc. and prompt updates to the C&N Work Plan.

Provide conceptual ideas for field route piping and produce quality sketches, Check accuracy of approved construction drawing and documentation for execution. Carry out mechanical line and equipment checks, able to coordinate Civil and E&I activities progress, Support Construability reviews for Projects.

Conduct site inspection and explain work requirements to contractors; develop work plan with contractors, operations, maintenance, and other stakeholders for execution with minimum interruption to operating plant and ensure field work sequences are aligned. Able to coordinate with multi-disciplines during field execution.

Drive Contractors management to deliver contractors productivity improvements, contractors’ competency & assurance, including developing relevant work procedures and QA/QC. Accept or reject the quality of work & goods provided by contractors/vendors.

Establish time schedule/execution plan for more complex project with multi-disciplinary involvement amongst operations, maintenance, and contractors. Approval of construction related method statements.

Prepare and deliver weekly works & field progress report. Support computation and calculation of progress measurement, monitor work progress and able to provide schedule catch-up plan. Validate field work quotations and value of work done (VOWD)

Executes the Quality Assurance and Control Plan and Project Specifications. Reviews and approves Inspection Test Plan (ITP) according to Shell HSSE, Technical, and Process Safety Standards, and relevant industry code.

Perform as Permit Requestor (PR) and Authorized Engineer (AE), including for lifting works, as per SJI Permit to Work (PTW) requirement

Organize Mechanical Completion review and assist in operation readiness review for project handing over.

Carry out any other related duties as required, including temporary assignments in other sections within the MTAC department on site.

Educational Qualifications:

· Diploma/ Degree in Mechanical Engineering

Technical Qualifications:

· NACE Coating Inspector Level 2 (Validity Required)

· Qualified MOM OPSOC (Supervisor) or equivalent

· Qualified MOM CSOC (Supervisor) or equivalent

· Qualified MOM Manhole Supervisor

· Qualified MOM Confined Space Safety Assessor

· Qualified MOM Lifting Supervisor and Rigger/Signalman

· Qualified Work at Height Assessor

Professional Experience:

· Minimum 10 years of relevant experience in oil & gas, chemical & petrochemical industry in the below fields.

o Piping/Pipeline Construction, inspection and maintenance

o Tank maintenance

o Application of Protective Coatings (Organic Coatings, Thermal Spray Aluminum)

o Installation and maintenance of Insulation systems.

· Experience in Plant Turnaround Project planning, preparation and execution

· Experience with catalyst change out is a bonus.

Job Description & Requirements

• Responsible to the Principal Engineer, Piping for the preparation of design as per codes / standards and client’s specifications, requisitions for materials, equipment, valves, etc., and for the timely completion of each planned engineering activity assigned to him / her.
• Review of piping specification.
• Review piping stress analysis calculation.
• Review and finalize of piping routing, piping arrangement and support.
• Review design data for missing and / or ambiguities information.
• Reporting project progress to Principal Engineer, Piping on a weekly basis.
• Implementation of Engineering Procedure, drafting Standards and Quality Management.
• Preparation of proposals / estimations for equipment and tankage works.
• Review engineering calculation and technical specifications of storage tanks, pressure vessels and various mechanical equipment.
• Evaluate vendor’s bids and highlight deviations and omissions to purchasing for further clarifications with vendor.
• Perform any other responsibilities as directed by immediate supervisor.

Qualification & Experience generally required

• Bachelor Degree in Engineering.
• Min 8 years relevant working experience in Mechanical engineering in oil and gas sector or offshore sector.
• Know to use spring hanger in stress analysis.
• Proficient in Microsoft Office products, AutoCAD and Caesar ll Stress Analysis Software.
• Prefer to have at least 5 year of piping engineering related working experience.
• Prefer to have experience in Offshore/Shipyard project, Rig building/Ship building.
• Prefer to have experience in FPSO project, both topsides & marine.

Job Responsibilities:

• Oversee C&S design progress against schedule and budget on projects.
• Manage the interfacing with M&E contractors
• Coordinate with engineering consultant, review and comment its design drawings
• Monitor the design progress and statutory submission against project baseline program
• Implement corrective measures for identified distractions or issues.
• Review, negotiate and recommend for approval/disapproval on design change orders.
• Administer design subcontract including processing monthly invoices for payment.
• Coordinate and monitor status of design incentive/disincentive programs complying with provisions of design subcontract.
• Perform constructive reviews conforming design to prime contract requirements and proposal commitments.
• Coordinate and control design submittals for owner’s review and approval.
• Lead a design team for overall C&S and architectural design works, assist QS team for material takeoff and tendering, manage subcontractors and support site construction works
• Facilitate resolving design issues with owner.

Job Requirements:

• Degree qualifications in Civil and Structural Engineering
• Preferably 2 years of relevant expereince in the planning and design of major waste to energy projects or similar major projects
• Positive working attitude and ability to work in a fast-paced environment
• Well versed with C&S software

Job Summary:

The Process Safety Engineer is responsible for ensuring that all processes within the facility comply with safety regulations and standards. This role involves identifying, evaluating, and mitigating risks associated with hazardous processes to protect personnel, assets, and the environment. The engineer works closely with multidisciplinary teams to implement safety systems, conduct hazard analyses, and ensure compliance with industry best practices and regulatory requirements.

Key Responsibilities:

1. Process Safety Management (PSM):Develop, implement, and maintain the facility’s PSM program in line with local and international standards (e.g., OSHA PSM, API, IEC 61511).
   Perform regular audits and reviews of safety management systems.
   
2. Risk Assessment and Hazard Analysis:Conduct and facilitate risk assessments such as HAZID, HAZOP, LOPA, and SIL assessments.
   Analyze process safety incidents and near misses to identify root causes and corrective actions.
   Implement and maintain risk control measures.
   
3. Safety Design and Systems:Ensure the design and operation of safety-critical equipment meet safety requirements.
   Specify, evaluate, and test safety instrumented systems (SIS) and emergency shutdown systems (ESD).
   Provide input on process design reviews to ensure inherent safety principles are applied.
   
4. Compliance and Standards:Ensure compliance with applicable safety standards, codes, and regulations.
   Prepare and submit required safety documentation and reports to regulatory bodies.
   Liaise with government agencies, certification bodies, and auditors as needed.
   
5. Emergency Response Planning:Support the development of emergency response plans and procedures.
   Conduct process safety drills and training sessions for staff.
   
6. Training and Development:Provide training to operations and maintenance personnel on process safety concepts and best practices.
   Promote a strong safety culture within the organization.
   
7. Incident Investigation:Lead or support investigations into process-related incidents.
   Develop and implement corrective and preventive actions to mitigate future risks.
   
8. Collaboration and Communication:Work closely with operations, maintenance, engineering, and project teams to ensure process safety is integrated into all activities.
   Provide technical guidance on process safety issues.
   

Key Requirements:

Qualifications:

• Bachelor's degree in Chemical Engineering, Mechanical Engineering, or a related field.
• Advanced certifications in process safety (e.g., CCPS Process Safety Professional Certification, NEBOSH Process Safety Management) are a plus.

Experience:

• Minimum 10 years of experience in process safety engineering within the oil and gas industry, ideally with FPSO, refinery, or petrochemical exposure.
• Proven track record of implementing process safety programs and conducting risk assessments.

Technical Skills:

• Strong knowledge of process safety management frameworks and standards (e.g., OSHA PSM, API, IEC 61508/61511).
• Proficiency in process hazard analysis tools such as PHAST, PHA-Pro, or BowTie XP.
• Familiarity with safety design concepts, such as flare systems, relief valves, and blowdown systems.
• Understanding of fire and gas detection systems, ESD, and SIL verification.

Soft Skills:

• Excellent analytical and problem-solving skills.
• Strong communication and interpersonal skills for cross-functional collaboration.
• Attention to detail and ability to manage multiple priorities effectively.

Preferred:

• Experience working on offshore or FPSO projects.
• Familiarity with environmental regulations and sustainability practices in the oil and gas sector.

Job Description:

1. Oversee and manage building construction projects from planning to completion.

2. Ensure compliance with building codes, regulations, and industry standards.

3. Collaborate with architects, engineers, contractors, and stakeholders to resolve design and construction issues.

4. Conduct site inspections to monitor progress, quality, and safety.

5. Develop and manage project budgets, schedules, and resources.

6. Coordinate with contractors and suppliers to ensure timely delivery of materials and services.

7. Troubleshoot and resolve construction-related problems and disputes.

8. Ensure environmental sustainability and energy efficiency in building design and construction.

Requirements:

1. Qualifications: Bachelor's or Master's degree in Civil Engineering, Construction Engineering, or related field.

2. Experience: Minimum 5+ years of experience in building construction, engineering, or a related field.

3. Certifications: Professional Engineer (PE) license or equivalent; LEED AP or other sustainability certifications are a plus.

4. Skills:

- Strong knowledge of building codes, regulations, and industry standards.

- Excellent project management, leadership, and communication skills.

- Proficiency in construction management software, such as Procore, Autodesk, or Oracle.

- Strong problem-solving and analytical skills.

5. Soft Skills:

- Strong interpersonal and communication skills.

- Ability to work collaboratively in a fast-paced environment.

- Strategic thinking and business development skills.

- Adaptability and flexibility in a rapidly changing environment.

With the business expansion, we're looking to hire a Singapore based Technical Sales Engineer to look after key accounts.

For this role, you will need to

• Build and maintain rapport with existing and potential clients, partners and other stakeholders.
• General sales leads and lead technical and commercial discussion.
• Attend regional marketing event/networking session.
• Gather and analyse on customers/competitors' activities/products/industry developments and compile market intelligence reports, work closely with product development team to fulfill client's requirement.
• Deliver product presentations to current and potential clients.

Job requirement

• Degree/Diploma in any field (engineering related major is preferred).
• At least 2 years of sales experience within engineering space, candidates with technical background are welcome to apply.
• Team player and independent, good communication skills.

PES is an international services company providing Project Management, Construction Management, Commissioning & Qualification and Automation services to our clients in the pharmaceutical, nutritional and related sectors.

With offices across Europe, Asia and US, our core focus is on consistently delivering high-quality outcomes for our multinational clients.

This focus, and our people's experience in delivering consistent quality results for our clients over the past 20 years has been key to our success to date.

We are currently looking for a E&I Engineer to join us on a contract role to help us deliver various projects in the Life Sciences Industry.

Key Attributes/Responsibilities

· Ensure that calibration and preventive maintenance (PM) programs are established for new instruments/equipment in the Manufacturing Unit, Laboratories, Utilities, and General Areas within COMOS, CMX, and SAP-PM by coordinating necessary information.

· Verify that vendor-executed instrument commissioning and calibration for Electrical and Instrumentation (E&I) meet site requirements.

· Update instrument data in COMOS, SAP-PM, and CMX as needed.

· Ensure successful execution of instrument calibrations and the issuance of calibration certificates in CMX, according to the project schedule.

· Provide timely and relevant input to the project team from pre-commissioning through to the end of validation.

· Participate in Electrical and Instrumentation-related troubleshooting, deviations, and root cause investigations.

· Ensure that all Electrical and Instrumentation activities comply with site-specific Work Instructions (WI) and Standard Operating Procedures (SOPs).

We are currently looking for candidates in Singapore.

If you'd like to find out about this opportunity or any other opportunity, please forward your CV to Sruthi Srikanth ([email protected]).

If you would like to find out about the latest Jobs and Projects we are involved in then do follow us on LinkedIn: https://www.linkedin.com/company/processengineeringspecialists/mycompany/

PES International operates as an equal opportunity employer. No terminology in this advert is intended to discriminate on the grounds of age, race, religion, sexual orientation or any other factors with no bearing to employment skills and we confirm that we are happy to accept applications from persons of any background for this role.

Job Description

• Prepare project management plan and its sub-plans, such as: work scope statement,
schedule plan, manpower plan, tools and equipment plan, procurement plan
• Provide engineering support in project or plant maintenance
• Coordinate internal and external audit review
• Engineering calculations associated with current carrying capacity of cables, wires,
fuses and other circuit protective devices.
• Procedures for inspection, testing and certification of electrical fixed installations.
• Industrial hazards, safety and health precautions, and environmental concerns.
• Installation practice and regulations, and relevant codes of practice.

Reporting to our Senior Practice Director, the Cloud Solutions Engineer is a strategic technology partner for our clients. You leverage your technical expertise and cloud engineering skills to support and manage clients' databases and cloud infrastructure, ensuring successful design, implementation, and migration of databases and applications while maintaining security and performance standards.

At Insum, the Cloud Solutions Engineer is a technical expert and collaborative problem-solver. You translate clients' business requirements into robust cloud architectures and solutions. Through your deep understanding of cloud technologies and database management, you support mission-critical environments and drive technological transformation for our clients.

Your main missions are:

• Functional Leadership & Technical Vision
  • Design and implement cloud infrastructures aligned with business needs and industry standards
  • Maintain a clear vision of infrastructure roadmaps and strategies while adapting to evolving client requirements
  • Create and execute migration strategies for workload transition to cloud platforms
• Technical Expertise
  • Master Oracle Database administration and cloud infrastructure management
  • Implement and maintain high availability and disaster recovery solutions
  • Support Oracle environments (databases and applications) within a 24/7 on-call schedule
  • Design and manage cloud-native solutions and application development
• Collaboration and Client Support
  • Establish transparent and regular communication with all stakeholders
  • Support clients during their business hours across different time zones (North American, European, or other)
  • Work effectively within the Infrastructure Support team
  • Manage client relationships and understand their technical needs
• Infrastructure Management
  • Monitor and ensure security of clients' cloud infrastructure
  • Perform database migrations and transformations
  • Implement best practices for cloud technologies
  • Support both on-premises and cloud environments

Job Description

If you are engineering trained, independent, self motivated and good team player, come join us as a Sales & Application Engineer.

• The candidates should be engineering trained.
• He/she is to maintain good relationship with existing customers and develop new businesses for the sale of company products (e.g. pumps & spare parts).
• Knowledge of handling tender documents, technical documentation and manual would be an added advantage.
• Daily tasks includes the handling of RFQ, attending to technical queries, provide technical solutions etc.
• Travelling within the region may be required.

Requirements

• Minimum Certificate in Engineering.
• With or without relevant experience as training will be provided.
• Possess a valid class 2/3 license would be an added advantage.
• Good engineering knowledge and self-motivated.
• Able to work independently, yet a good team player with positive work attitude

Remarks : Well performed candidates may be selected for overseas training.

Review electrical engineering drawings and refer issues requiring changes.

Assign job tasks and work as per electrical project schedules.

Review all electrical drawings with Leadmen performing on assigned jobs to them.

Stimulate fabrication standards to ensure quality work attained from assigned staff.

Recruit, guide, train, monitor and terminate assigned employees as required.

Recommend effective solutions specified particular weight related to employment status of employees.

Schedule, assign, plan and supervise electrical shop personnel performance on different electrical projects.

Plan and prepare work and equipment usage schedule

Review electrical engineering drawings and refer issues requiring changes.

Assign job tasks and work as per electrical project schedules.

Review all electrical drawings with Leadmen performing on assigned jobs to them.

Stimulate fabrication standards to ensure quality work attained from assigned staff.

Recruit, guide, train, monitor and terminate assigned employees as required.

Recommend effective solutions specified particular weight related to employment status of employees.

Schedule, assign, plan and supervise electrical shop personnel performance on different electrical projects.

Plan and prepare work and equipment usage schedule

Purpose: To create, control and manage changes to customer's Technical Product Data (TPD) packages (Items, Bill of Materials, Product specification documents) in the Product Lifecycle Management (PLM) and Enterprise Resource Planning (ERP) systems. To deploy TPD changes to the relevant Persons-in-Charge (PICs) for execution.

Key Area of Responsibilities:

• Check the correctness and completeness of product packages, such as Technical Product Data (TPD) and Bill of Materials (BOM) received from customers.
• Work with the user of TPDs to define the new TPD requirement and update the ISO document (for new customers or any change in TPD requirement).
• Maintain required customer items, BOM, and TPDs in PLM and ERP systems.
• Create and control the item part number, BOM and TPD in the PLM and ERP systems.
• Create projects in the ERP system for the fulfillment of customer Sales orders.
• Implement Engineering Change Order (ECOs) and deploy the changes to the next inline PIC (such as planner, purchaser, process engineer and Sales & Program dept.)
• Check and ensure all required information for the TPD (items, BOMs, documents) and/or configuration change are provided, and approved by the customer.
• Support and participate in company continuous improvement program.

Qualification & Experiences:

• Diploma/Degree in Mechanical Engineering/Science or relevant field.
• Minimum 2 years of working as a product data engineer in the semiconductor industry or similar position.
• Proficient in Microsoft Excel functions
• Good communication skills