• Experienced in the design of water treatment plants (desalination, potable water, recycle water), wastewater treatment plants (municipal and industrial) and membranes systems (MBR, MF/UF, Reverse Osmosis, Nano-Filtration, etc.)

• Review Client’s Requirement, Technical Specifications & Tender Specifications to generate engineering deliverables (General Specification & Particular Specifications, Datasheets, Major Equipment List, Pipe List, Mass Balance, Hydraulic Profiles, Process Flow Diagram, Process & Instrumentation Diagram, etc.)

• Assist the Engineering Manager on engagement with Clients, Consultants, Sub-Contractors, Vendors, and others for the development of design, procurement, fabrication, construction, erection and commissioning works.

• Coordinate with inter-disciplines engineering team (Process, Mechanical, Electrical, Instrumentation & Control Automation, C&S, Piping & Systems/Skids Engineering and Drafting) on development of engineering deliverable on a timely basis.

• Reviewing and providing input to project schedule and ensure all planned dates and progress are realistic. Provide updates on engineering deliverables per schedules and implement catch-up actions where applicable.

• Procurement Services Support: Develop the applicable Equipment List/Package, Technical Specifications and Bill of Materials to support Procurement Department to issue Request for Quotation (RFQ). Assist to review the RFQ, prepare applicable technical & commercial clarifications with selected Sub-Contractors or Suppliers. Provide justification on the shortlisted Sub-Contractors or Suppliers for onward negotiations.

• Assist the Engineering Manager on the development of FAT, SAT, Pre-Commissioning, Start-up, Commissioning protocol and support the implementation.

• Development of Operational & Maintenance Manual.

• Assist the Engineering Manager to support project management team in project implementation related engineering, troubleshooting and maintenance requirement.

Responsibilities:

• Liaise and work closely with the consultant, clients and subcontractors on the progress of M&E work to meet the project schedule.
• To supervise and ensure works are in accordance to the contract drawings and specifications
• Prepare correspondence reports, suggesting corrective actions or value added recommendations according to best practice when applicable,
• Responsible for keeping daily work record, including additional work claim to the clients and from the subcontracts.
• Other ad-hoc duties when assigned

Requirements:

• Min Diploma / Degree in Mechanical Engineering with ACMV, Electrical, Plumbing/Sanitary Services, Fire Protection background.
• Min 3 years working experienced and equipped with knowledge in M&E Services (Especially Machanical, ACMV, Electrical, Plumbing/Sanitary Services, Fire Protection) in the related field is required for this position.
• Knowledge of BIM or AutoCAD added Advantage
• Be able to work independently with minimum guidance and under pressure to meet tight deadlines.

Responsibilities

• Support and provide mechanical engineering design
• Handle design works and/or project management relevant to ACMV, Fire Protection, Sanitary and Plumbing.
• Supervise and coach a team of engineers in mechanical services for the project from concept stage, design development, contract documentation, authority submissions, site administration to project completion
• Act as either Project Manager or Team Leader in projects.
• Act as mentor to new employees.
• Provide technical assistance to engineers.
• Advise engineers on the project administration and contractual issues.
• Conduct technical discussion on common design problems with engineers

Requirements

• Recognised Degree in Mechanical Engineering with PEB Singapore
• Candidate must have min 6 years of relevant working experience in design engineering of ACMV / HVAC, Fire Protection and Plumbing services with Engineering Consultancies in Singapore
• Proven track record of working across organization boundaries to define requirements, solve complex problems and drive programs to successful completion
• Good understanding of Singapore Code of Practice and local authority submission process (LTA / PUB / BCA)
• BIM and CAD capabilities (REVIT / Microstation / Autocad) will be added advantage

Good communication skills and ability to work as part of a team.

1. Oversees client & contractor coordination, attending to their needs in all aspects of M&E works.

2. Carry out project planning, design, material requisition, cost control, project supervision and documentation.

3. Oversees M & E works and coordinate with client’s representatives, consultants and sub-contractors to resolve any technical matters or site issues.

4. Review M&E tender documents and contract requirements including proposal for value engineering.

5. Develop and prepare designs and drawings from preliminary concepts, sketches and specifications.

6. Adhere to specific deadlines and deliver high-quality plans.

• Conduct daily toolbox meetings with teams, ensuring safe work practices.
• Complete repairs, maintenance, and overhauls on time.
• Deliver high-quality services to satisfy customers.
• Prepare quotations for new inquiries and manage job costs within budget.
• Prepare service reports after project completion.

• Mentoring of Mechanical Designers with the intent of securing properly trained personnel for the continual expansion of the company;
• Ensuring the System Supervisor is provided with the current shop and space management drawings, specifications, approved technical submittals and all approved changes in scope;
• Ensuring the System Supervisor is fully briefed on the awarded scope of work, the tender technical documents and all contractual revisions to tender documentation;
• Evaluating technical submittals for specification and client requirement compliance;
• Approving Test Packs at each step of construction through to completion;
• Forwarding testing and commission passing criteria to the System Supervisor;
• Evaluating progress claims against work complete;
• Evaluating contractor variation quantity claimed is accurate.

Requirements:

• Degree in Mechanical Engineering
• At least 3 years of design experience

Angela Teh Ling Wei (CEI No.R1104464)

Contact Number:67860100

Email Address:[email protected]

Recruit Express Pte Ltd / EA Licence No: 99C4599

We regret only shortlisted candidates will be contacted

Responsibilities:

• Prepare Product / Architectural / Mechanical drawings with AutoCAD / Solidworks.
• Work within stated procedures to ensure that design records/controls are maintained.
• Provide product technical support to customers / suppliers.
• Ensure Supplier’s Quality meet our Quality Standard.
• To Initiate / propose / participate in Quality Improvement.
• Take part in new product development.
• Other ad-hoc job assigned by the supervisor.

Requirements:

• Min Degree in Mechanical/Engineering or equivalent.
• Good understanding of Precision machining processes.
• Well versed with manufacturing process & good understanding of material specifications common to Ironmongery industry.
• Minimum 3 to 4 years experience in mechanical field or Ironmongery industry.
• Required language(s): English, Mandarin (to liaise with 90% Mandarin speaking customers - majority, and suppliers in regard to technical support).
• Well verse in Solidworks & AutoCAD Software.
• Responsible, mature, independent with a positive attitude and willingness to learn.

Additional Information

• Office Location: 141 Woodlands Industrial Park E 5, Woodland E-Terrace Singapore 757507.
• Working Hours: Mondays to Fridays (8:30am to 5:30pm), Alternative Saturdays (8:30am to 1:30pm)

For immediate consideration, please indicate the following information in your resume:

(a) Current and expected salary

(b) Earliest available date to commence work

Please note that qualified applicants who are immediately available will be given priority, and we regret that only shortlisted applicants will be notified.

RED an expanding international M&E consultancy, with a proven track record in low energy design, focused on providing excellent design solutions to clients.

We now seek an experienced Senior Mechanical Engineer to be based in our Singapore office to inspire others. You will have the ability to run small and large sized projects, undertake a client facing role in the development, design, and co-ordination of engineering projects You will have experience in the delivery of data centres along with other sector experience including commercial, hotel, retail, and hotel design desirable.

Your excellent communication and interpersonal skills, both with colleagues and clients, and experience working on innovative projects with leading client organisations, and contractors will equip you to take a future pro-active role in forging client relationships of our sector portfolio.

You will possess good commercial awareness, in addition to having robust technical knowledge relevant to building services design, and capable of incorporating those technologies into the hotel / hospitality and leisure sector. The position will ideally suit someone who is currently working in building service consultancy and is prepared to work ‘hands on’.

Role Responsibilities

• Responsible for running of medium size projects. Undertakes a client facing role in the development and design and coordination of engineering project services for Mechanical or Electrical installations, systems, equipment, facilities etc.
• Develops and specifies applications of controls, instruments, and operating systems for all building engineering services purposes
• Surveys tests and reports on existing electrical/mechanical installations
• Specifies activities to ensure that manufacturing, construction, installation, and operational testing confirm to functional specifications and customer requirements
• Day to day decision making on project progress and direct liaison with and provides advice to client
• Represents Company at technical meetings with customers, professional teams and contractors teams
• Carries out engineering calculations to ensure drawings meet required robust industry and legal standards
• Responsible for technical content and accuracy of Trainee, Graduates and Engineers
• Validation and checking of designs and specifications

Job Requirements:

• BEng, MSc, and have sufficient experience
• Degree Qualified, Licensed Engineer, MCIBSE/MIEE or HNC/HND plus appropriate experience or equivalent
• Working towards Chartered/Professional Engineer status
• Competent in specification design/drawing for several building types
• Sound knowledge of key Health and Safety issues and legislation
• Ability to use IT based calculation and spreadsheet software
• Good understanding of BS SC and International design codes and Standards

If you think you have what it takes to join an award winning team and help RED continue its exciting journey, we want to hear from you!

Company Write Up:

Durapower is 15 years in operations and is company identified by Enterprise Singapore to scale up for growth as well. We have projects in Netherlands, Singapore, Thailand and Southeast Asia regions, production is in China as a manufacturing plant. There is no manufacturing here, but we have R&D team here liaising with China as well to execute trade of cells, battery modular systems packs enabling green industry applications. Our expansion is also enhanced by the stakes and investment in us through Banpu Next (Banpu Group) which is listed on the Thailand Stock Exchange.

You may refer to the news here: https://en.prnasia.com/releases/apac/durapower-to-advance-global-expansion-plan-after-us-70-million-investment-from-banpu-next-394762.shtml

Video by Management on Durapower:

https://www.linkedin.com/posts/activity-6945009405591465984-ew1t?utm_source=linkedin_share&utm_medium=member_desktop_web

This position will be supported by Enterprise Singapore on the Singapore Global Executive Programme (Companies) (enterprisesg.gov.sg).

You may read up on Durapower's Management Associate Programme - Durapower-management-associate-programme – Durapower Group.

Job Description: Mechanical Engineer (ESG-SGEP)

The specialization of this job role will enable mechanical & structural design initiatives.

Responsibilities

· Serve as local design lead for customized design and pre-sales proposal, platform design, design-changes, trials, and root-cause analysis.

· Own mechanical and structural analysis using CAE tools.

· Own basic on-site component and system level testing to support design and specification changes, coordinate validation testing for changes with global team.

· Organize Root-Cause & Corrective Analysis for design issues

· Collaborate directly with Manufacturing, Process, and Quality to solve yield barriers and scrap issues

Requirements

· Degree with less than 3 years of experience in Mechanical Engineering

Job Description

• Prepare and review the design of the Mechanical Works, such as piping & equipment drawings, calculation and data sheets.
• Involve in daily coordination with internal C&S and BIM team to resolve all the clashes, penetration etc.
• Develop the work schedule and coordination of the project works to ensure project is on schedule.
• Attend to FAT, supervision of the delivery, installation and testing and commissioning of mechanical works.
• Handle and resolve all site technical relating matters.
• Prepare, review and assist in subcontractor design and submission, ensuring all project specifications and design standards are met.
• Prepare all relevant checklist for Installation and Testing & Commissioning Works.
• Assist and collaborate with other project team members to comply with project requirements and meet project schedules.
• Collaborate with internal stakeholders, clients, consultants, vendors and contractors.
• Attend to clients’ comments and ensure clients’ approval & acceptance to all Mechanical Works related design, installation and Testing & Commissioning Works.

Requirements

• Degree in Mechanical Engineering.
• 5 to 8 years of relevant experience in the construction industry. Working experience in water or wastewater industry will be an advantage.
• Familiar with Auto CAD, Mechanical, Structure drawings and Microsoft Office.
• Experience in design, installation, testing and commissioning of the mechanical works e.g. pipings, pumps etc.
• Experience in Project Execution, Project Coordination, Supervising and Coordination with sub-contractors, consultant, and Client.
• Good technical knowledge in understanding the Mechanical System.
• Well versed in BIM software i.e. Bentley and Navisworks
• Team player with good interpersonal skills.
• Meticulous and analytical with excellent problem-solving skills.
• Able to work under tight deadlines.
• Highly motivated and able to work independently with minimal supervision.
• Will be required to work full time on project site.

Our client, a leading company specializing in infrastructure and construction projects, is seeking an experienced Mechanical Engineer to join their team for an LTA project. The ideal candidate will play a critical role in ensuring the success of engineering deliverables, from design to execution.

Responsibilities:

• Perform engineering duties such as design, calculations, planning, and tender preparation/evaluation as part of the project team.
• Liaise with suppliers to conduct pre-inspections of materials and equipment, ensuring compliance with specifications and performing inspections after delivery to identify any defects.
• Prepare and manage QA/QC documentation for engineering deliverables.
• Collaborate with clients, project managers, architects, and contractors to ensure smooth project progression.
• Assist in resolving technical challenges encountered during the design or construction phases of the project.
• Perform any other duties as assigned by the project team.

Requirements:

• Bachelor’s degree in Mechanical or Electrical Engineering.
• Strong proficiency in industry-standard software and tools.
• Excellent written and verbal communication skills.
• Experience in applying design thinking for product innovation and enhancement.
• Commitment to providing excellent customer service with strong interpersonal skills.
• Familiarity with current industry standards, regulations, and best practices.
• Ability to demonstrate flexibility, maintain a positive attitude, and resolve conflicts effectively.
• Creative problem-solving skills with the ability to meet deadlines.
• Up-to-date technical knowledge relevant to mechanical engineering in infrastructure projects.
• This position involves work on large-scale infrastructure projects, specifically within the LTA scope, providing an excellent opportunity for professional growth and contribution to critical developments.

Interested candidates please apply online or send your latest CV to [email protected]

AlwaysHired Pte Ltd

Reg No: R1549345

EA: 24C2293

We regret to inform that only shortlisted candidates will be notified. Please note that your response to this advertisement will constitute informed consent to the collection, use, and/or disclosure of personal data by AlwaysHired, its affiliates and, where necessary, to relevant third parties, for purposes such as job application processing, career advisory, research, and other administrative purposes, in compliance with the relevant provisions of the Privacy Policy available at www.alwayshired.com.sg/privacy-policy

Job Description

• Industry/ Organization Type: Manufacturing
• Position Title: Mechanical Engineer
• Working Location: Redhill
• Working Hours: 5 days (Monday to Thursday 8.30 AM – 6 PM, Friday 8.30 AM – 5 PM)
• Salary Package: Basic Salary up to $6,000 + Performance Bonus
• Duration: Permanent

Key Responsibilities

• Provide guidance and technical assistance to sales and service teams.
• Offer customized solutions for technical issues and sales inquiries.
• Assist the service team with equipment repair and maintenance.
• Develop procedures for equipment testing, maintenance, and operation.
• Coordinate in-house product assembly and validation testing and produce test reports.
• Conduct technical presentations and product training for clients.
• Create and maintain drawings, bills of materials, and design documentation.
• Discuss technical requirements with clients on-site and coordinate site work.
• Prepare method statements and reports for site work.
• Any other ad-hoc duties as assigned.

APPLY NOW!!!

• Diploma/Degree in Mechanical Engineering or equivalent
• Has 3 years of working experience in Mechanical Engineering, preferably in O&G industries
• Prior experience in flange management is advantageous
• Proficiency with CAD tools such as Solidworks and AutoCAD is an advantage

Kindly apply through ANY of the following methods:

• Submit your application by clicking the APPLY button;
• Email your resume to Job(at)anradus.com.sg. Kindly indicate #69140 on the email subject.

Anradus Application Policy: We value each application and ensure every resume is reviewed. Our process is efficient, typically concluding within 3 working days. If you do not receive communication from us within this timeframe, it’s likely that your application has not been shortlisted by our client. In such cases, we recommend continuing your job search to maximize your opportunities.

Anradus Pte Ltd | EA License No. 20C0161 | Angel Lim | EA Reg No.: R1769781

Job Scope:

• Assist in the design, development, and testing of mechanical systems and components
• Support the assembly of mechanical systems, ensuring alignment with specifications and quality standards
• Collaborate with engineers to improve and troubleshoot mechanical designs
• Conduct inspections and quality checks on assembled parts and systems
• Prepare and update technical documentation, including assembly instructions and reports
• Assist in the assembly and integration of mechanical components into final products
• Perform mechanical testing, collecting data and providing analysis for continuous improvement
• Support in the selection and procurement of materials for mechanical assemblies
• Coordinate with production teams to ensure timely and accurate assembly of components
• Provide technical support and troubleshooting during the assembly process
• Maintain and organize engineering tools, equipment, and assembly areas
• Ensure compliance with safety and industry regulations during the assembly process
• Assist in the development of prototypes and new product designs.

Requirements:

• Nitec / Higher Nitec / Diploma in Mechanical Engineering
• 2 to 3 years of relevant experience
• Knowledge of industrial automation, jigs and fixture design, FMEA, SPC, CAD, and machine design is a plus
• Strong project management skills and self-disciplined
• Good interpersonal and communication skills
• Willingness to travel when necessary

Interested candidates who wish to apply for the advertised position, please click on the APPLY button below to send in your resume to [email protected]

EA License No: 13C6305

Reg. No.: R1981808

For candidate who applied for the advertised position is deemed to have consented to us that we may collect, use or disclose your personal information for purpose in connection with the services provided by us.

Job Description:

• Deliver technical design of CNC solutions for customize specification.
• Produce 2D&3D engineering drawings using Solidwork and CATIA.
• Analyze existing systems and improve designs.
• Conduct technical design review and evaluation to ensure compliance to standards.
• Documenting the design process, iterations for fabrication.
• Perform other duties as assigned.

Job Requirement:

• Good interpersonal and communication skill
• Proficiency with engineering design programs such as AutoCAD, Solidworks
• Knowledge of design and engineering principles
• Attentive to detail and critically minded
• Welcoming fresh graduate from mechanical engineering

AngelineMah
Reg No: R2096146
One Vogue Pte Ltd
EA License: 19C9629

Key Responsibilities

Perform engineering analysis under general supervision

Design or modify mechanical engineering layouts/schematics and/or detailed drawings/specifications of moderate scope under general supervision

Perform and document engineering tests under general supervision

Generate related alpha/gamma documentation for product release under general supervision

Coordinate the procurement and assembly of mechanical components/equipment and identify sources of critical parts and subsystems to resolve moderately complex technical issues

Troubleshoot a variety of mechanical problems of moderate difficultly under general supervision

Implement concepts of moderate product issues and mechanical solutions of moderate difficulty

May be responsible for the design, development and implementation of custom mechanical tooling, fixturing, and associated processes to enable the handling, assembly and/or disassembly of parts, components, sub-assemblies and final assemblies throughout the product life cycle

Functional Knowledge

• Demonstrates expanded conceptual knowledge in own discipline and broadens capabilities

Business Expertise

• Understands key business drivers; uses this understanding to accomplish own work

Leadership

• No supervisory responsibilities but provides informal guidance to new team members

Problem Solving

• Solves problems in straightforward situations; analyzes possible solutions using technical experience and judgment and precedents

Impact

• Impacts quality of own work and the work of others on the team; works within guidelines and policies

Interpersonal Skills

• Explains complex information to others in straightforward situations

Lead a project team in the following for Mechanical (M&E) services for building projects:

• Concept designed.

• Detail design development.

• Contract documentation.

• Authority submission.

• Site administration to project completion.

Requirements:

• Singaporean / PR.

• At least 5 years of working experience in the related Building Consultancy/Project Management field.

• Bachelor’s Degree in Mechanical or related discipline.

• Good inter-personal skills.

• Self driven and able to work independently.

• Basic Proficiency in AutoCAD and BIM.

Salary: $4,500 to $5,000

DESCRIPTION

The Piping Mechanical Engineer reports to the Project Engineering Manager and shall be responsible for technical compliance with all design requirements and coordination with the necessary Client and Subcontractor’s discipline engineering professionals. The lead piping engineer shall ensure that all de-signs comply with the requirements of the Work; that all Work is efficiently and effectively executed in accordance with the criteria, specifications and standards listed in the CONTRACT; and that the designs comply with safe and reasonable standards as accepted within the offshore oil and gas industry. They shall be responsible for his/her scope of work as given below:

DUTIES & RESPONSIBILITIES

• Prepare and review key project documentation in executing the complete scope of piping engineering work as per the project requirements.
• Familiar with offshore piping materials, stress engineering, platforms and FPSO layout design, material handling and pipe support design.
• Conduct 3d Model reviews as per project requirements.
• Experience in piping standards, creating MTOs.
• Ensure that technical compliance with all design requirements is met.
• Prepare and review detailed calculations, analysis, and solutions to deliver safe, secure, and fully functional facilities.
• Interface with Client’s Engineering team to resolve the technical issues.
• Effectively manage design changes and provide optimized solutions during project executions.
• Review and management of project general specifications, engineering procedures and policies.
• Provide work progress reports.
• Accountable for the quality engineering deliverables.
• Provide engineering guidance to Contractors wherever required.
• Achieve safety standards as defined in Project requirements.
• To achieve project completion to the project specifications on schedule.
• Support project planning as necessary.
• Field Engineering support during construction phase of the project.
• Coordinate with class for surveys and reviews related to shipyard work.
• Coordinate with internal and external parties for monitoring and controls.

Comply with HSE requirements:

• Environmental Aspects & Impacts Assessment.
• OHS Hazardous & Risk Assessment.
• Follow HSE Regulations.

REQUIREMENTS

• Able to relocate to Dubai for Project duration, minimum 6 months.
• Minimum educational requirements of a Bachelor’s and/or Masters’ degree in mechanical/materials engineering.
• Direct experience as a lead piping engineer working on FPSO projects.
• Minimum 15 years’ experience, with Oil & Gas projects (fixed installations and FPSOs), with significant experience working as a Senior or Lead Engineer.
• Must have prior work experience with medium/ large sized brownfield and/or greenfield projects in the upstream Oil and Gas sector, in a similar role and possess a good understanding of project phases, milestones, deliverables, internal and external interfaces.
• Shall be skilled with commonly used business software applications such MS Office, MS project and drafting software such as AutoCad and ed modelling software such as PDMS.
• Shall be capable of supporting the development and implementing recommendations from third party safety studies and workshops, including HAZID/ENVID, SIL Classifications, Smoke, Gas, Fire and Explosion Risk Analyses, QRA, ALARP assessments, Fire and Gas Mappings and Noise Studies.

Job Scope:

• Assist in the design, development, and testing of mechanical systems and components
• Support the assembly of mechanical systems, ensuring alignment with specifications and quality standards
• Collaborate with engineers to improve and troubleshoot mechanical designs
• Conduct inspections and quality checks on assembled parts and systems
• Prepare and update technical documentation, including assembly instructions and reports
• Assist in the assembly and integration of mechanical components into final products
• Perform mechanical testing, collecting data and providing analysis for continuous improvement
• Support in the selection and procurement of materials for mechanical assemblies
• Coordinate with production teams to ensure timely and accurate assembly of components
• Provide technical support and troubleshooting during the assembly process
• Maintain and organize engineering tools, equipment, and assembly areas
• Ensure compliance with safety and industry regulations during the assembly process
• Assist in the development of prototypes and new product designs.

Requirements:

• Nitec / Higher Nitec / Diploma in Mechanical Engineering
• 2 to 3 years of relevant experience
• Knowledge of industrial automation, jigs and fixture design, FMEA, SPC, CAD, and machine design is a plus
• Strong project management skills and self-disciplined
• Ability to work independently
• Good interpersonal and communication skills
• Willingness to travel when necessary

Interested candidates who wish to apply for the advertised position, please click on the APPLY button below to send in your resume to [email protected]

EA License No: 13C6305

Reg. No.: R1981808

For candidate who applied for the advertised position is deemed to have consented to us that we may collect, use or disclose your personal information for purpose in connection with the services provided by us.

Job Description

• Oversee process mechanical design for process plant (Wastewater Treatment Plant, Water Treatment Plant, etc) including P&ID, equipment/piping/valve sizing, equipment selection, equipment/piping layout, equipment specification/data sheet, etc
• Provide process mechanical input and coordinate with other disciplines (including the BIM modelling team) for the design, installation and T&C work
• Oversee technical review of mechanical equipment/system vendors’ proposal and submission during procurement, detailed design and installation stages, support the procurement and tender work
• Prepare the process mechanical submissions and resubmissions to project consultants and client according to project schedule and clear the submittal comments
• Manage the mechanical equipment suppliers / subcontractors to meet the project schedule and quality requirements for design, installation and testing & commissioning
• Support on the testing, commissioning and O&M work

Requirements

• Minimum bachelor’s degree in chemical/environmental/mechanical engineering
• Minimum 4 Years’ experience in process/mechanical work (design, engineering, installation support, T&C, etc.), ideally for water/wastewater treatment project (including sludge treatment); For senior position, candidate must have at least 8 years of relevant experience.
• Familiarity with international and local standards (e.g., ASME, ANSI, PUB Singapore regulations)
• Familiarity with mechanical equipment used in WWTPs, including such as screens, pumps, mixers, blower, air compressors, tanks, biogas equipment, odour control system, sludge equipment, piping, and valves, etc
• Must be a self-starter and be able to work with minimal supervision, make sound decisions, take independent action, and provide focused solutions to assigned projects
• Possess strong inter-personal and communication skills and be able to work well with people at all levels in the organization
• Must have advanced computer literacy in commonly usedsoftware applications such as MS Office
• Knowledge in Naviswork and Bentley View Software will be an added advantage

Roles and responsibilities:

· To do conceptual and detailed machine design with regard to mechanical aspects.

· To prepare solid models, layouts, views and bills of materials for assigned design machine assemblies and sub-assemblies.

· To prepare final design configurations, layouts, solid models and production/engineering data.

· To assist in preparation of machine documentation, specifications, manual.

· Able to perform assigned tasks independently or through team activities.

· Self-motivated, resourceful and organized.

Job Requirements:

· Degree/Diploma or relevant in Mechanical Engineering.

· Preferably with working experience in designing automation systems , jig and fixture ,robotics and conveyor system.

· Proficiency with Solid Works is desirable.

· Ability to lead, manage project and communicate well with customers, vendors, engineers, technicians and team members.

Qualified candidates please send your application with full resume stating current and expected salary.

Task and Responsibilities

• Read and understand technical specifications, prepare job-list, work schedule, plan material take off and manpower planning of yard men and contractor for each given jobs. Report department head and update any special materials for specific project (if require more lead time or needs to purchase from overseas)
• Advance planning man and materials, including all facilities.
• Generate, Control and monitor department budgets.
• Order the material required as per material take off and co-ordinate with purchase department for timely delivery of the materials
• Cooperate with project manager on appropriate procedures and schedule to complete the job.
• Ensure safety, discipline and welfare for all subordinates.
• Carry out trade work as per specifications and to the satisfaction of the owner/class & timely completion. Ensure good quality work as per work instructions. Ensure all trade work mark-up drawings to be made and approved by owner’s representative
• Maintain good housekeeping and Safety at all times on board vessel & workshop. Ensure all workers follow safe work procedures at all times
• Responsible for minimum wastage of materials and balance material to be accounted and returned to store at the end of the project.
• Prepare, setup and review department documents (RA, SOP, Internal & External auditing, OR) with supervisor and manager
• Lead group of supervisors, fitters and sub-contractors.
• Ensuring optimum work processes and equipment utilization.
• Understand all jobs given supervise and give detail instructions to subordinates and contractors report to department engineer or department head.
• Ensure all work completion reports will be done by Ship in-charge, verify & submit to owner Rep to get sign before handing over to commercial department on time (before vessel delivery)
• Monitoring vessel daily job deployment report to achieve target on time.
• Perform other related jobs as assigned by DH.
• Ensure Permit to work system is followed strictly.
• Identify parts and components needed for repairs or replacement and to liaise with regional vendors for replacement of critical spares for vessels.

Job Requirements

3 years and above of relevant experience in ship building & Ship repair industry.

• Possesses in depth knowledge on Marine Machinery Works.
• Able to speak and write in proper English.
• Self-initiative and motivated individual.
• Possesses quality leadership skills to lead and supervise people under their charge.
• Able to give constructing advice based on their qualified experiences.

We are looking for a creative, resourceful Mechanical Design Engineer to join us. The Mechanical Design Engineer is responsible for conceptual / detailed design and will have the opportunity to participate in prototyping, installation, testing and verification of their design. This role requires good technical writing skills to produce documentation for submission to Customers and Clients. The Mechanical Design Engineer will work with a multi-disciplinary team and exposed to interactions with customers, partners, vendors, and sub-contractors.

Job Requirement:

• Master/Bachelor Degree or Diploma in Mechanical/Mechatronic Engineering
• Well-versed with Solidworks and AutoCAD
• Well-versed with Microsoft Word and Excel
• Able to travel overseas when required
• Minimum 2 years of mechanical design or product development experience
• Good technical writing skill
• Basic knowledge of GD&T and manufacturing processes

Job Scope:

• Assist in the design, analysis, and improvement of mechanical systems and components.
• Support assembly planning and execution, ensuring components meet specifications.
• Troubleshoot and resolve assembly-related technical issues.
• Participate in testing and evaluation of products to ensure quality standards.
• Assist in creating and maintaining technical documentation and reports.
• Help with research and development of new mechanical designs and prototypes.
• Ensure proper maintenance and calibration of assembly tools and equipment.
• Coordinate with cross-functional teams (production, quality, procurement).
• Suggest and implement improvements for assembly efficiency and product quality.
• Ensure compliance with safety protocols and quality control procedures.
• Provide day-to-day technical support to the assembly or production teams.

Requirements:

• Nitec / Higher Nitec / Diploma in Mechanical Engineering
• 2 to 3 years of relevant experience
• Knowledge of industrial automation, jigs and fixture design, FMEA, SPC, CAD, and machine design (preferred)
• Strong project management skills
• Ability to work independently
• Good interpersonal and communication skills
• Willing to travel when necessary

Interested candidates who wish to apply for the advertised position, please click on the APPLY button below to send in your resume to [email protected]

EA License No: 13C6305

Reg. No.: R1981808

For candidate who applied for the advertised position is deemed to have consented to us that we may collect, use or disclose your personal information for purpose in connection with the services provided by us.

• Conduct onsite inspections and troubleshooting at client premises.
• Provide hands-on preventive maintenance, repair, and equipment installation.
• Adhere to company field processes and protocols.
• Carry out mechanical/electrical device system upgrades.
• Collaborate with engineers on project management, equipment installation, and maintenance services.

The Mechanical Engineer is responsible for the engineering and delivery of mechanical and structural aspects of construction under direction from the Construction Manager. Their activities will involve coordinating design and construction efforts, resolving on site engineering issues and planning and tracking productivity targets.

Key responsibilities and accountabilities

Technical

• Design, integration & coordination, installation & commissioning of mechanical systems and services required for the project
• Liaise with Construction/Installation Manager to ensure job is on schedule on Site.
• Liaise with Client on all technical aspects of the project.
• Provides engineering advice for the Construction/Installation Team.
• Attends meetings with client on all disciplines of the work (i.e. 1 etc.) as required.
• Prepares with the Quality Manager all Inspection and Test Plans and associated Project Specific Procedures.
• Ensures that the quality requirements of the client are adhered to and that company procedures are followed.
• Coordination & integration of the design with other engineering design disciplines & services
• Ensure project timetabling requirements are met
• Development / production of inspection & test and operating & maintenance manual documentation.
• Ensure local regulatory and OHS requirements are maintained
• Ensure that the surveys of installations throughout the project are conducted in a professional manner with all results being reviewed and accepted by UGL. All actions resulting from these surveys are coordinated by the Engineer until completion.
• Provides written reports on engineering activities as required by the Project Manager.
• Mentor Engineering Graduates and Engineering Vacation Students (Engineering Assistant)
• Maintain documentation and registers
• Provide monthly reporting data to the Engineering Manager as required

Safety

• Undertake all responsibilities in a safe manner.
• Ensure a safe working condition is present for all employees, contractors and visitors.
• Participate in daily pre-start meetings.
• Use appropriate personal protective equipment and safety systems such as job safety analysis, pre-work checklists and risk assessments.
• Comply and have input into safe working procedures.
• Report hazards, incidents and accidents within company guidelines.
• Assist with safety sections for reports, tenders and proposals.
• Actively participate in safety training.

Other

• Prepare and implement Workpacks, including ITPs
• Detailed planning and engineering of works
• Procurement of suppliers and subcontractors
• Subcontractor and Supplier Management
• Monitor, control and update program and productivity metrics
• Enthusiastically and co-operatively undertake all site inductions as requested by the client.
• Proactively continuously monitor and evaluation systems and procedures specific to site works to ensure that they are up to date, compliant and up-to-date in line with best practice.
• Actively participate in regular learning and development programs to continually enhance and further develop skills and continuously improve capabilities and performance.
• Portray a professional approach at all times through attitude and appearance.
• Ensure that work space is well managed, tidy, organised and safe.
• Comply with all UGL systems and processes and expected behaviours and standards.

Qualifications and Education Requirements

• Mechanical Engineering Qualification.
• Minimum 5 years’ experience in project related disciplines.
• Significant engineering experience throughout, design, construction and commissioning on Brownfields and Greenfields projects.
• Technical experience includes; rotating equipment, static equipment, GE equipment, materials selection, hydraulic systems, pipelines and piping components
• Strong communication skills (oral & written) including strong negotiation and influencing skills and the ability to establish effective working relationships with a variety of people at different levels both internally and externally.
• Demonstrated ability to work independently to organise and prioritise demands, handle multiple complex tasks simultaneously, set and meet deadlines and follow-through within a fast paced environment with multiple and competing demands
• Proficient skills in computers: MS Word, Excel, Access, Outlook
• Leadership ability

• Machine design in Mechanical aspect
• Perform mechanical part detailing
• BOM & machine manual writing
• Conduct machine acceptance with customer
• Co-ordination with sub-contractors for machine build
• Posses strong leadership quality and be self-motivated
• Experience in Solidwork 3D software to do mechanical design
• Good knowledge and experience in machine automation
• Degree / Diploma in Mechanical Engineering